| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2014 Traphandler |
| * Copyright (C) 2014 Free Electrons |
| * Copyright (C) 2014 Atmel |
| * |
| * Author: Jean-Jacques Hiblot <jjhiblot@traphandler.com> |
| * Author: Boris BREZILLON <boris.brezillon@free-electrons.com> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/irq.h> |
| #include <linux/irqchip.h> |
| #include <linux/mfd/atmel-hlcdc.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/platform_device.h> |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_drv.h> |
| #include <drm/drm_fb_helper.h> |
| #include <drm/drm_gem_cma_helper.h> |
| #include <drm/drm_gem_framebuffer_helper.h> |
| #include <drm/drm_irq.h> |
| #include <drm/drm_probe_helper.h> |
| #include <drm/drm_vblank.h> |
| |
| #include "atmel_hlcdc_dc.h" |
| |
| #define ATMEL_HLCDC_LAYER_IRQS_OFFSET 8 |
| |
| static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9n12_layers[] = { |
| { |
| .name = "base", |
| .formats = &atmel_hlcdc_plane_rgb_formats, |
| .regs_offset = 0x40, |
| .id = 0, |
| .type = ATMEL_HLCDC_BASE_LAYER, |
| .cfgs_offset = 0x2c, |
| .layout = { |
| .xstride = { 2 }, |
| .default_color = 3, |
| .general_config = 4, |
| }, |
| .clut_offset = 0x400, |
| }, |
| }; |
| |
| static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_at91sam9n12 = { |
| .min_width = 0, |
| .min_height = 0, |
| .max_width = 1280, |
| .max_height = 860, |
| .max_spw = 0x3f, |
| .max_vpw = 0x3f, |
| .max_hpw = 0xff, |
| .conflicting_output_formats = true, |
| .nlayers = ARRAY_SIZE(atmel_hlcdc_at91sam9n12_layers), |
| .layers = atmel_hlcdc_at91sam9n12_layers, |
| }; |
| |
| static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = { |
| { |
| .name = "base", |
| .formats = &atmel_hlcdc_plane_rgb_formats, |
| .regs_offset = 0x40, |
| .id = 0, |
| .type = ATMEL_HLCDC_BASE_LAYER, |
| .cfgs_offset = 0x2c, |
| .layout = { |
| .xstride = { 2 }, |
| .default_color = 3, |
| .general_config = 4, |
| .disc_pos = 5, |
| .disc_size = 6, |
| }, |
| .clut_offset = 0x400, |
| }, |
| { |
| .name = "overlay1", |
| .formats = &atmel_hlcdc_plane_rgb_formats, |
| .regs_offset = 0x100, |
| .id = 1, |
| .type = ATMEL_HLCDC_OVERLAY_LAYER, |
| .cfgs_offset = 0x2c, |
| .layout = { |
| .pos = 2, |
| .size = 3, |
| .xstride = { 4 }, |
| .pstride = { 5 }, |
| .default_color = 6, |
| .chroma_key = 7, |
| .chroma_key_mask = 8, |
| .general_config = 9, |
| }, |
| .clut_offset = 0x800, |
| }, |
| { |
| .name = "high-end-overlay", |
| .formats = &atmel_hlcdc_plane_rgb_and_yuv_formats, |
| .regs_offset = 0x280, |
| .id = 2, |
| .type = ATMEL_HLCDC_OVERLAY_LAYER, |
| .cfgs_offset = 0x4c, |
| .layout = { |
| .pos = 2, |
| .size = 3, |
| .memsize = 4, |
| .xstride = { 5, 7 }, |
| .pstride = { 6, 8 }, |
| .default_color = 9, |
| .chroma_key = 10, |
| .chroma_key_mask = 11, |
| .general_config = 12, |
| .scaler_config = 13, |
| .csc = 14, |
| }, |
| .clut_offset = 0x1000, |
| }, |
| { |
| .name = "cursor", |
| .formats = &atmel_hlcdc_plane_rgb_formats, |
| .regs_offset = 0x340, |
| .id = 3, |
| .type = ATMEL_HLCDC_CURSOR_LAYER, |
| .max_width = 128, |
| .max_height = 128, |
| .cfgs_offset = 0x2c, |
| .layout = { |
| .pos = 2, |
| .size = 3, |
| .xstride = { 4 }, |
| .default_color = 6, |
| .chroma_key = 7, |
| .chroma_key_mask = 8, |
| .general_config = 9, |
| }, |
| .clut_offset = 0x1400, |
| }, |
| }; |
| |
| static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_at91sam9x5 = { |
| .min_width = 0, |
| .min_height = 0, |
| .max_width = 800, |
| .max_height = 600, |
| .max_spw = 0x3f, |
| .max_vpw = 0x3f, |
| .max_hpw = 0xff, |
| .conflicting_output_formats = true, |
| .nlayers = ARRAY_SIZE(atmel_hlcdc_at91sam9x5_layers), |
| .layers = atmel_hlcdc_at91sam9x5_layers, |
| }; |
| |
| static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = { |
| { |
| .name = "base", |
| .formats = &atmel_hlcdc_plane_rgb_formats, |
| .regs_offset = 0x40, |
| .id = 0, |
| .type = ATMEL_HLCDC_BASE_LAYER, |
| .cfgs_offset = 0x2c, |
| .layout = { |
| .xstride = { 2 }, |
| .default_color = 3, |
| .general_config = 4, |
| .disc_pos = 5, |
| .disc_size = 6, |
| }, |
| .clut_offset = 0x600, |
| }, |
| { |
| .name = "overlay1", |
| .formats = &atmel_hlcdc_plane_rgb_formats, |
| .regs_offset = 0x140, |
| .id = 1, |
| .type = ATMEL_HLCDC_OVERLAY_LAYER, |
| .cfgs_offset = 0x2c, |
| .layout = { |
| .pos = 2, |
| .size = 3, |
| .xstride = { 4 }, |
| .pstride = { 5 }, |
| .default_color = 6, |
| .chroma_key = 7, |
| .chroma_key_mask = 8, |
| .general_config = 9, |
| }, |
| .clut_offset = 0xa00, |
| }, |
| { |
| .name = "overlay2", |
| .formats = &atmel_hlcdc_plane_rgb_formats, |
| .regs_offset = 0x240, |
| .id = 2, |
| .type = ATMEL_HLCDC_OVERLAY_LAYER, |
| .cfgs_offset = 0x2c, |
| .layout = { |
| .pos = 2, |
| .size = 3, |
| .xstride = { 4 }, |
| .pstride = { 5 }, |
| .default_color = 6, |
| .chroma_key = 7, |
| .chroma_key_mask = 8, |
| .general_config = 9, |
| }, |
| .clut_offset = 0xe00, |
| }, |
| { |
| .name = "high-end-overlay", |
| .formats = &atmel_hlcdc_plane_rgb_and_yuv_formats, |
| .regs_offset = 0x340, |
| .id = 3, |
| .type = ATMEL_HLCDC_OVERLAY_LAYER, |
| .cfgs_offset = 0x4c, |
| .layout = { |
| .pos = 2, |
| .size = 3, |
| .memsize = 4, |
| .xstride = { 5, 7 }, |
| .pstride = { 6, 8 }, |
| .default_color = 9, |
| .chroma_key = 10, |
| .chroma_key_mask = 11, |
| .general_config = 12, |
| .scaler_config = 13, |
| .phicoeffs = { |
| .x = 17, |
| .y = 33, |
| }, |
| .csc = 14, |
| }, |
| .clut_offset = 0x1200, |
| }, |
| { |
| .name = "cursor", |
| .formats = &atmel_hlcdc_plane_rgb_formats, |
| .regs_offset = 0x440, |
| .id = 4, |
| .type = ATMEL_HLCDC_CURSOR_LAYER, |
| .max_width = 128, |
| .max_height = 128, |
| .cfgs_offset = 0x2c, |
| .layout = { |
| .pos = 2, |
| .size = 3, |
| .xstride = { 4 }, |
| .pstride = { 5 }, |
| .default_color = 6, |
| .chroma_key = 7, |
| .chroma_key_mask = 8, |
| .general_config = 9, |
| .scaler_config = 13, |
| }, |
| .clut_offset = 0x1600, |
| }, |
| }; |
| |
| static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sama5d3 = { |
| .min_width = 0, |
| .min_height = 0, |
| .max_width = 2048, |
| .max_height = 2048, |
| .max_spw = 0x3f, |
| .max_vpw = 0x3f, |
| .max_hpw = 0x1ff, |
| .conflicting_output_formats = true, |
| .nlayers = ARRAY_SIZE(atmel_hlcdc_sama5d3_layers), |
| .layers = atmel_hlcdc_sama5d3_layers, |
| }; |
| |
| static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d4_layers[] = { |
| { |
| .name = "base", |
| .formats = &atmel_hlcdc_plane_rgb_formats, |
| .regs_offset = 0x40, |
| .id = 0, |
| .type = ATMEL_HLCDC_BASE_LAYER, |
| .cfgs_offset = 0x2c, |
| .layout = { |
| .xstride = { 2 }, |
| .default_color = 3, |
| .general_config = 4, |
| .disc_pos = 5, |
| .disc_size = 6, |
| }, |
| .clut_offset = 0x600, |
| }, |
| { |
| .name = "overlay1", |
| .formats = &atmel_hlcdc_plane_rgb_formats, |
| .regs_offset = 0x140, |
| .id = 1, |
| .type = ATMEL_HLCDC_OVERLAY_LAYER, |
| .cfgs_offset = 0x2c, |
| .layout = { |
| .pos = 2, |
| .size = 3, |
| .xstride = { 4 }, |
| .pstride = { 5 }, |
| .default_color = 6, |
| .chroma_key = 7, |
| .chroma_key_mask = 8, |
| .general_config = 9, |
| }, |
| .clut_offset = 0xa00, |
| }, |
| { |
| .name = "overlay2", |
| .formats = &atmel_hlcdc_plane_rgb_formats, |
| .regs_offset = 0x240, |
| .id = 2, |
| .type = ATMEL_HLCDC_OVERLAY_LAYER, |
| .cfgs_offset = 0x2c, |
| .layout = { |
| .pos = 2, |
| .size = 3, |
| .xstride = { 4 }, |
| .pstride = { 5 }, |
| .default_color = 6, |
| .chroma_key = 7, |
| .chroma_key_mask = 8, |
| .general_config = 9, |
| }, |
| .clut_offset = 0xe00, |
| }, |
| { |
| .name = "high-end-overlay", |
| .formats = &atmel_hlcdc_plane_rgb_and_yuv_formats, |
| .regs_offset = 0x340, |
| .id = 3, |
| .type = ATMEL_HLCDC_OVERLAY_LAYER, |
| .cfgs_offset = 0x4c, |
| .layout = { |
| .pos = 2, |
| .size = 3, |
| .memsize = 4, |
| .xstride = { 5, 7 }, |
| .pstride = { 6, 8 }, |
| .default_color = 9, |
| .chroma_key = 10, |
| .chroma_key_mask = 11, |
| .general_config = 12, |
| .scaler_config = 13, |
| .phicoeffs = { |
| .x = 17, |
| .y = 33, |
| }, |
| .csc = 14, |
| }, |
| .clut_offset = 0x1200, |
| }, |
| }; |
| |
| static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sama5d4 = { |
| .min_width = 0, |
| .min_height = 0, |
| .max_width = 2048, |
| .max_height = 2048, |
| .max_spw = 0xff, |
| .max_vpw = 0xff, |
| .max_hpw = 0x3ff, |
| .nlayers = ARRAY_SIZE(atmel_hlcdc_sama5d4_layers), |
| .layers = atmel_hlcdc_sama5d4_layers, |
| }; |
| |
| static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sam9x60_layers[] = { |
| { |
| .name = "base", |
| .formats = &atmel_hlcdc_plane_rgb_formats, |
| .regs_offset = 0x60, |
| .id = 0, |
| .type = ATMEL_HLCDC_BASE_LAYER, |
| .cfgs_offset = 0x2c, |
| .layout = { |
| .xstride = { 2 }, |
| .default_color = 3, |
| .general_config = 4, |
| .disc_pos = 5, |
| .disc_size = 6, |
| }, |
| .clut_offset = 0x600, |
| }, |
| { |
| .name = "overlay1", |
| .formats = &atmel_hlcdc_plane_rgb_formats, |
| .regs_offset = 0x160, |
| .id = 1, |
| .type = ATMEL_HLCDC_OVERLAY_LAYER, |
| .cfgs_offset = 0x2c, |
| .layout = { |
| .pos = 2, |
| .size = 3, |
| .xstride = { 4 }, |
| .pstride = { 5 }, |
| .default_color = 6, |
| .chroma_key = 7, |
| .chroma_key_mask = 8, |
| .general_config = 9, |
| }, |
| .clut_offset = 0xa00, |
| }, |
| { |
| .name = "overlay2", |
| .formats = &atmel_hlcdc_plane_rgb_formats, |
| .regs_offset = 0x260, |
| .id = 2, |
| .type = ATMEL_HLCDC_OVERLAY_LAYER, |
| .cfgs_offset = 0x2c, |
| .layout = { |
| .pos = 2, |
| .size = 3, |
| .xstride = { 4 }, |
| .pstride = { 5 }, |
| .default_color = 6, |
| .chroma_key = 7, |
| .chroma_key_mask = 8, |
| .general_config = 9, |
| }, |
| .clut_offset = 0xe00, |
| }, |
| { |
| .name = "high-end-overlay", |
| .formats = &atmel_hlcdc_plane_rgb_and_yuv_formats, |
| .regs_offset = 0x360, |
| .id = 3, |
| .type = ATMEL_HLCDC_OVERLAY_LAYER, |
| .cfgs_offset = 0x4c, |
| .layout = { |
| .pos = 2, |
| .size = 3, |
| .memsize = 4, |
| .xstride = { 5, 7 }, |
| .pstride = { 6, 8 }, |
| .default_color = 9, |
| .chroma_key = 10, |
| .chroma_key_mask = 11, |
| .general_config = 12, |
| .scaler_config = 13, |
| .phicoeffs = { |
| .x = 17, |
| .y = 33, |
| }, |
| .csc = 14, |
| }, |
| .clut_offset = 0x1200, |
| }, |
| }; |
| |
| static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sam9x60 = { |
| .min_width = 0, |
| .min_height = 0, |
| .max_width = 2048, |
| .max_height = 2048, |
| .max_spw = 0xff, |
| .max_vpw = 0xff, |
| .max_hpw = 0x3ff, |
| .fixed_clksrc = true, |
| .nlayers = ARRAY_SIZE(atmel_hlcdc_sam9x60_layers), |
| .layers = atmel_hlcdc_sam9x60_layers, |
| }; |
| |
| static const struct of_device_id atmel_hlcdc_of_match[] = { |
| { |
| .compatible = "atmel,at91sam9n12-hlcdc", |
| .data = &atmel_hlcdc_dc_at91sam9n12, |
| }, |
| { |
| .compatible = "atmel,at91sam9x5-hlcdc", |
| .data = &atmel_hlcdc_dc_at91sam9x5, |
| }, |
| { |
| .compatible = "atmel,sama5d2-hlcdc", |
| .data = &atmel_hlcdc_dc_sama5d4, |
| }, |
| { |
| .compatible = "atmel,sama5d3-hlcdc", |
| .data = &atmel_hlcdc_dc_sama5d3, |
| }, |
| { |
| .compatible = "atmel,sama5d4-hlcdc", |
| .data = &atmel_hlcdc_dc_sama5d4, |
| }, |
| { |
| .compatible = "microchip,sam9x60-hlcdc", |
| .data = &atmel_hlcdc_dc_sam9x60, |
| }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, atmel_hlcdc_of_match); |
| |
| enum drm_mode_status |
| atmel_hlcdc_dc_mode_valid(struct atmel_hlcdc_dc *dc, |
| const struct drm_display_mode *mode) |
| { |
| int vfront_porch = mode->vsync_start - mode->vdisplay; |
| int vback_porch = mode->vtotal - mode->vsync_end; |
| int vsync_len = mode->vsync_end - mode->vsync_start; |
| int hfront_porch = mode->hsync_start - mode->hdisplay; |
| int hback_porch = mode->htotal - mode->hsync_end; |
| int hsync_len = mode->hsync_end - mode->hsync_start; |
| |
| if (hsync_len > dc->desc->max_spw + 1 || hsync_len < 1) |
| return MODE_HSYNC; |
| |
| if (vsync_len > dc->desc->max_spw + 1 || vsync_len < 1) |
| return MODE_VSYNC; |
| |
| if (hfront_porch > dc->desc->max_hpw + 1 || hfront_porch < 1 || |
| hback_porch > dc->desc->max_hpw + 1 || hback_porch < 1 || |
| mode->hdisplay < 1) |
| return MODE_H_ILLEGAL; |
| |
| if (vfront_porch > dc->desc->max_vpw + 1 || vfront_porch < 1 || |
| vback_porch > dc->desc->max_vpw || vback_porch < 0 || |
| mode->vdisplay < 1) |
| return MODE_V_ILLEGAL; |
| |
| return MODE_OK; |
| } |
| |
| static void atmel_hlcdc_layer_irq(struct atmel_hlcdc_layer *layer) |
| { |
| if (!layer) |
| return; |
| |
| if (layer->desc->type == ATMEL_HLCDC_BASE_LAYER || |
| layer->desc->type == ATMEL_HLCDC_OVERLAY_LAYER || |
| layer->desc->type == ATMEL_HLCDC_CURSOR_LAYER) |
| atmel_hlcdc_plane_irq(atmel_hlcdc_layer_to_plane(layer)); |
| } |
| |
| static irqreturn_t atmel_hlcdc_dc_irq_handler(int irq, void *data) |
| { |
| struct drm_device *dev = data; |
| struct atmel_hlcdc_dc *dc = dev->dev_private; |
| unsigned long status; |
| unsigned int imr, isr; |
| int i; |
| |
| regmap_read(dc->hlcdc->regmap, ATMEL_HLCDC_IMR, &imr); |
| regmap_read(dc->hlcdc->regmap, ATMEL_HLCDC_ISR, &isr); |
| status = imr & isr; |
| if (!status) |
| return IRQ_NONE; |
| |
| if (status & ATMEL_HLCDC_SOF) |
| atmel_hlcdc_crtc_irq(dc->crtc); |
| |
| for (i = 0; i < ATMEL_HLCDC_MAX_LAYERS; i++) { |
| if (ATMEL_HLCDC_LAYER_STATUS(i) & status) |
| atmel_hlcdc_layer_irq(dc->layers[i]); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct drm_mode_config_funcs mode_config_funcs = { |
| .fb_create = drm_gem_fb_create, |
| .atomic_check = drm_atomic_helper_check, |
| .atomic_commit = drm_atomic_helper_commit, |
| }; |
| |
| static int atmel_hlcdc_dc_modeset_init(struct drm_device *dev) |
| { |
| struct atmel_hlcdc_dc *dc = dev->dev_private; |
| int ret; |
| |
| drm_mode_config_init(dev); |
| |
| ret = atmel_hlcdc_create_outputs(dev); |
| if (ret) { |
| dev_err(dev->dev, "failed to create HLCDC outputs: %d\n", ret); |
| return ret; |
| } |
| |
| ret = atmel_hlcdc_create_planes(dev); |
| if (ret) { |
| dev_err(dev->dev, "failed to create planes: %d\n", ret); |
| return ret; |
| } |
| |
| ret = atmel_hlcdc_crtc_create(dev); |
| if (ret) { |
| dev_err(dev->dev, "failed to create crtc\n"); |
| return ret; |
| } |
| |
| dev->mode_config.min_width = dc->desc->min_width; |
| dev->mode_config.min_height = dc->desc->min_height; |
| dev->mode_config.max_width = dc->desc->max_width; |
| dev->mode_config.max_height = dc->desc->max_height; |
| dev->mode_config.funcs = &mode_config_funcs; |
| dev->mode_config.async_page_flip = true; |
| |
| return 0; |
| } |
| |
| static int atmel_hlcdc_dc_load(struct drm_device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev->dev); |
| const struct of_device_id *match; |
| struct atmel_hlcdc_dc *dc; |
| int ret; |
| |
| match = of_match_node(atmel_hlcdc_of_match, dev->dev->parent->of_node); |
| if (!match) { |
| dev_err(&pdev->dev, "invalid compatible string\n"); |
| return -ENODEV; |
| } |
| |
| if (!match->data) { |
| dev_err(&pdev->dev, "invalid hlcdc description\n"); |
| return -EINVAL; |
| } |
| |
| dc = devm_kzalloc(dev->dev, sizeof(*dc), GFP_KERNEL); |
| if (!dc) |
| return -ENOMEM; |
| |
| dc->desc = match->data; |
| dc->hlcdc = dev_get_drvdata(dev->dev->parent); |
| dev->dev_private = dc; |
| |
| ret = clk_prepare_enable(dc->hlcdc->periph_clk); |
| if (ret) { |
| dev_err(dev->dev, "failed to enable periph_clk\n"); |
| return ret; |
| } |
| |
| pm_runtime_enable(dev->dev); |
| |
| ret = drm_vblank_init(dev, 1); |
| if (ret < 0) { |
| dev_err(dev->dev, "failed to initialize vblank\n"); |
| goto err_periph_clk_disable; |
| } |
| |
| ret = atmel_hlcdc_dc_modeset_init(dev); |
| if (ret < 0) { |
| dev_err(dev->dev, "failed to initialize mode setting\n"); |
| goto err_periph_clk_disable; |
| } |
| |
| drm_mode_config_reset(dev); |
| |
| pm_runtime_get_sync(dev->dev); |
| ret = drm_irq_install(dev, dc->hlcdc->irq); |
| pm_runtime_put_sync(dev->dev); |
| if (ret < 0) { |
| dev_err(dev->dev, "failed to install IRQ handler\n"); |
| goto err_periph_clk_disable; |
| } |
| |
| platform_set_drvdata(pdev, dev); |
| |
| drm_kms_helper_poll_init(dev); |
| |
| return 0; |
| |
| err_periph_clk_disable: |
| pm_runtime_disable(dev->dev); |
| clk_disable_unprepare(dc->hlcdc->periph_clk); |
| |
| return ret; |
| } |
| |
| static void atmel_hlcdc_dc_unload(struct drm_device *dev) |
| { |
| struct atmel_hlcdc_dc *dc = dev->dev_private; |
| |
| drm_kms_helper_poll_fini(dev); |
| drm_atomic_helper_shutdown(dev); |
| drm_mode_config_cleanup(dev); |
| |
| pm_runtime_get_sync(dev->dev); |
| drm_irq_uninstall(dev); |
| pm_runtime_put_sync(dev->dev); |
| |
| dev->dev_private = NULL; |
| |
| pm_runtime_disable(dev->dev); |
| clk_disable_unprepare(dc->hlcdc->periph_clk); |
| } |
| |
| static int atmel_hlcdc_dc_irq_postinstall(struct drm_device *dev) |
| { |
| struct atmel_hlcdc_dc *dc = dev->dev_private; |
| unsigned int cfg = 0; |
| int i; |
| |
| /* Enable interrupts on activated layers */ |
| for (i = 0; i < ATMEL_HLCDC_MAX_LAYERS; i++) { |
| if (dc->layers[i]) |
| cfg |= ATMEL_HLCDC_LAYER_STATUS(i); |
| } |
| |
| regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IER, cfg); |
| |
| return 0; |
| } |
| |
| static void atmel_hlcdc_dc_irq_uninstall(struct drm_device *dev) |
| { |
| struct atmel_hlcdc_dc *dc = dev->dev_private; |
| unsigned int isr; |
| |
| regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IDR, 0xffffffff); |
| regmap_read(dc->hlcdc->regmap, ATMEL_HLCDC_ISR, &isr); |
| } |
| |
| DEFINE_DRM_GEM_CMA_FOPS(fops); |
| |
| static const struct drm_driver atmel_hlcdc_dc_driver = { |
| .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, |
| .irq_handler = atmel_hlcdc_dc_irq_handler, |
| .irq_preinstall = atmel_hlcdc_dc_irq_uninstall, |
| .irq_postinstall = atmel_hlcdc_dc_irq_postinstall, |
| .irq_uninstall = atmel_hlcdc_dc_irq_uninstall, |
| DRM_GEM_CMA_DRIVER_OPS, |
| .fops = &fops, |
| .name = "atmel-hlcdc", |
| .desc = "Atmel HLCD Controller DRM", |
| .date = "20141504", |
| .major = 1, |
| .minor = 0, |
| }; |
| |
| static int atmel_hlcdc_dc_drm_probe(struct platform_device *pdev) |
| { |
| struct drm_device *ddev; |
| int ret; |
| |
| ddev = drm_dev_alloc(&atmel_hlcdc_dc_driver, &pdev->dev); |
| if (IS_ERR(ddev)) |
| return PTR_ERR(ddev); |
| |
| ret = atmel_hlcdc_dc_load(ddev); |
| if (ret) |
| goto err_put; |
| |
| ret = drm_dev_register(ddev, 0); |
| if (ret) |
| goto err_unload; |
| |
| drm_fbdev_generic_setup(ddev, 24); |
| |
| return 0; |
| |
| err_unload: |
| atmel_hlcdc_dc_unload(ddev); |
| |
| err_put: |
| drm_dev_put(ddev); |
| |
| return ret; |
| } |
| |
| static int atmel_hlcdc_dc_drm_remove(struct platform_device *pdev) |
| { |
| struct drm_device *ddev = platform_get_drvdata(pdev); |
| |
| drm_dev_unregister(ddev); |
| atmel_hlcdc_dc_unload(ddev); |
| drm_dev_put(ddev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int atmel_hlcdc_dc_drm_suspend(struct device *dev) |
| { |
| struct drm_device *drm_dev = dev_get_drvdata(dev); |
| struct atmel_hlcdc_dc *dc = drm_dev->dev_private; |
| struct regmap *regmap = dc->hlcdc->regmap; |
| struct drm_atomic_state *state; |
| |
| state = drm_atomic_helper_suspend(drm_dev); |
| if (IS_ERR(state)) |
| return PTR_ERR(state); |
| |
| dc->suspend.state = state; |
| |
| regmap_read(regmap, ATMEL_HLCDC_IMR, &dc->suspend.imr); |
| regmap_write(regmap, ATMEL_HLCDC_IDR, dc->suspend.imr); |
| clk_disable_unprepare(dc->hlcdc->periph_clk); |
| |
| return 0; |
| } |
| |
| static int atmel_hlcdc_dc_drm_resume(struct device *dev) |
| { |
| struct drm_device *drm_dev = dev_get_drvdata(dev); |
| struct atmel_hlcdc_dc *dc = drm_dev->dev_private; |
| |
| clk_prepare_enable(dc->hlcdc->periph_clk); |
| regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IER, dc->suspend.imr); |
| |
| return drm_atomic_helper_resume(drm_dev, dc->suspend.state); |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(atmel_hlcdc_dc_drm_pm_ops, |
| atmel_hlcdc_dc_drm_suspend, atmel_hlcdc_dc_drm_resume); |
| |
| static const struct of_device_id atmel_hlcdc_dc_of_match[] = { |
| { .compatible = "atmel,hlcdc-display-controller" }, |
| { }, |
| }; |
| |
| static struct platform_driver atmel_hlcdc_dc_platform_driver = { |
| .probe = atmel_hlcdc_dc_drm_probe, |
| .remove = atmel_hlcdc_dc_drm_remove, |
| .driver = { |
| .name = "atmel-hlcdc-display-controller", |
| .pm = &atmel_hlcdc_dc_drm_pm_ops, |
| .of_match_table = atmel_hlcdc_dc_of_match, |
| }, |
| }; |
| module_platform_driver(atmel_hlcdc_dc_platform_driver); |
| |
| MODULE_AUTHOR("Jean-Jacques Hiblot <jjhiblot@traphandler.com>"); |
| MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>"); |
| MODULE_DESCRIPTION("Atmel HLCDC Display Controller DRM Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:atmel-hlcdc-dc"); |