| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * PCI Hotplug Driver for PowerPC PowerNV platform. |
| * |
| * Copyright Gavin Shan, IBM Corporation 2016. |
| */ |
| |
| #include <linux/libfdt.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/pci_hotplug.h> |
| |
| #include <asm/opal.h> |
| #include <asm/pnv-pci.h> |
| #include <asm/ppc-pci.h> |
| |
| #define DRIVER_VERSION "0.1" |
| #define DRIVER_AUTHOR "Gavin Shan, IBM Corporation" |
| #define DRIVER_DESC "PowerPC PowerNV PCI Hotplug Driver" |
| |
| struct pnv_php_event { |
| bool added; |
| struct pnv_php_slot *php_slot; |
| struct work_struct work; |
| }; |
| |
| static LIST_HEAD(pnv_php_slot_list); |
| static DEFINE_SPINLOCK(pnv_php_lock); |
| |
| static void pnv_php_register(struct device_node *dn); |
| static void pnv_php_unregister_one(struct device_node *dn); |
| static void pnv_php_unregister(struct device_node *dn); |
| |
| static void pnv_php_disable_irq(struct pnv_php_slot *php_slot, |
| bool disable_device) |
| { |
| struct pci_dev *pdev = php_slot->pdev; |
| int irq = php_slot->irq; |
| u16 ctrl; |
| |
| if (php_slot->irq > 0) { |
| pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &ctrl); |
| ctrl &= ~(PCI_EXP_SLTCTL_HPIE | |
| PCI_EXP_SLTCTL_PDCE | |
| PCI_EXP_SLTCTL_DLLSCE); |
| pcie_capability_write_word(pdev, PCI_EXP_SLTCTL, ctrl); |
| |
| free_irq(php_slot->irq, php_slot); |
| php_slot->irq = 0; |
| } |
| |
| if (php_slot->wq) { |
| destroy_workqueue(php_slot->wq); |
| php_slot->wq = NULL; |
| } |
| |
| if (disable_device || irq > 0) { |
| if (pdev->msix_enabled) |
| pci_disable_msix(pdev); |
| else if (pdev->msi_enabled) |
| pci_disable_msi(pdev); |
| |
| pci_disable_device(pdev); |
| } |
| } |
| |
| static void pnv_php_free_slot(struct kref *kref) |
| { |
| struct pnv_php_slot *php_slot = container_of(kref, |
| struct pnv_php_slot, kref); |
| |
| WARN_ON(!list_empty(&php_slot->children)); |
| pnv_php_disable_irq(php_slot, false); |
| kfree(php_slot->name); |
| kfree(php_slot); |
| } |
| |
| static inline void pnv_php_put_slot(struct pnv_php_slot *php_slot) |
| { |
| |
| if (!php_slot) |
| return; |
| |
| kref_put(&php_slot->kref, pnv_php_free_slot); |
| } |
| |
| static struct pnv_php_slot *pnv_php_match(struct device_node *dn, |
| struct pnv_php_slot *php_slot) |
| { |
| struct pnv_php_slot *target, *tmp; |
| |
| if (php_slot->dn == dn) { |
| kref_get(&php_slot->kref); |
| return php_slot; |
| } |
| |
| list_for_each_entry(tmp, &php_slot->children, link) { |
| target = pnv_php_match(dn, tmp); |
| if (target) |
| return target; |
| } |
| |
| return NULL; |
| } |
| |
| struct pnv_php_slot *pnv_php_find_slot(struct device_node *dn) |
| { |
| struct pnv_php_slot *php_slot, *tmp; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pnv_php_lock, flags); |
| list_for_each_entry(tmp, &pnv_php_slot_list, link) { |
| php_slot = pnv_php_match(dn, tmp); |
| if (php_slot) { |
| spin_unlock_irqrestore(&pnv_php_lock, flags); |
| return php_slot; |
| } |
| } |
| spin_unlock_irqrestore(&pnv_php_lock, flags); |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL_GPL(pnv_php_find_slot); |
| |
| /* |
| * Remove pdn for all children of the indicated device node. |
| * The function should remove pdn in a depth-first manner. |
| */ |
| static void pnv_php_rmv_pdns(struct device_node *dn) |
| { |
| struct device_node *child; |
| |
| for_each_child_of_node(dn, child) { |
| pnv_php_rmv_pdns(child); |
| |
| pci_remove_device_node_info(child); |
| } |
| } |
| |
| /* |
| * Detach all child nodes of the indicated device nodes. The |
| * function should handle device nodes in depth-first manner. |
| * |
| * We should not invoke of_node_release() as the memory for |
| * individual device node is part of large memory block. The |
| * large block is allocated from memblock (system bootup) or |
| * kmalloc() when unflattening the device tree by OF changeset. |
| * We can not free the large block allocated from memblock. For |
| * later case, it should be released at once. |
| */ |
| static void pnv_php_detach_device_nodes(struct device_node *parent) |
| { |
| struct device_node *dn; |
| int refcount; |
| |
| for_each_child_of_node(parent, dn) { |
| pnv_php_detach_device_nodes(dn); |
| |
| of_node_put(dn); |
| refcount = kref_read(&dn->kobj.kref); |
| if (refcount != 1) |
| pr_warn("Invalid refcount %d on <%pOF>\n", |
| refcount, dn); |
| |
| of_detach_node(dn); |
| } |
| } |
| |
| static void pnv_php_rmv_devtree(struct pnv_php_slot *php_slot) |
| { |
| pnv_php_rmv_pdns(php_slot->dn); |
| |
| /* |
| * Decrease the refcount if the device nodes were created |
| * through OF changeset before detaching them. |
| */ |
| if (php_slot->fdt) |
| of_changeset_destroy(&php_slot->ocs); |
| pnv_php_detach_device_nodes(php_slot->dn); |
| |
| if (php_slot->fdt) { |
| kfree(php_slot->dt); |
| kfree(php_slot->fdt); |
| php_slot->dt = NULL; |
| php_slot->dn->child = NULL; |
| php_slot->fdt = NULL; |
| } |
| } |
| |
| /* |
| * As the nodes in OF changeset are applied in reverse order, we |
| * need revert the nodes in advance so that we have correct node |
| * order after the changeset is applied. |
| */ |
| static void pnv_php_reverse_nodes(struct device_node *parent) |
| { |
| struct device_node *child, *next; |
| |
| /* In-depth first */ |
| for_each_child_of_node(parent, child) |
| pnv_php_reverse_nodes(child); |
| |
| /* Reverse the nodes in the child list */ |
| child = parent->child; |
| parent->child = NULL; |
| while (child) { |
| next = child->sibling; |
| |
| child->sibling = parent->child; |
| parent->child = child; |
| child = next; |
| } |
| } |
| |
| static int pnv_php_populate_changeset(struct of_changeset *ocs, |
| struct device_node *dn) |
| { |
| struct device_node *child; |
| int ret = 0; |
| |
| for_each_child_of_node(dn, child) { |
| ret = of_changeset_attach_node(ocs, child); |
| if (ret) { |
| of_node_put(child); |
| break; |
| } |
| |
| ret = pnv_php_populate_changeset(ocs, child); |
| if (ret) { |
| of_node_put(child); |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static void *pnv_php_add_one_pdn(struct device_node *dn, void *data) |
| { |
| struct pci_controller *hose = (struct pci_controller *)data; |
| struct pci_dn *pdn; |
| |
| pdn = pci_add_device_node_info(hose, dn); |
| if (!pdn) |
| return ERR_PTR(-ENOMEM); |
| |
| return NULL; |
| } |
| |
| static void pnv_php_add_pdns(struct pnv_php_slot *slot) |
| { |
| struct pci_controller *hose = pci_bus_to_host(slot->bus); |
| |
| pci_traverse_device_nodes(slot->dn, pnv_php_add_one_pdn, hose); |
| } |
| |
| static int pnv_php_add_devtree(struct pnv_php_slot *php_slot) |
| { |
| void *fdt, *fdt1, *dt; |
| int ret; |
| |
| /* We don't know the FDT blob size. We try to get it through |
| * maximal memory chunk and then copy it to another chunk that |
| * fits the real size. |
| */ |
| fdt1 = kzalloc(0x10000, GFP_KERNEL); |
| if (!fdt1) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| ret = pnv_pci_get_device_tree(php_slot->dn->phandle, fdt1, 0x10000); |
| if (ret) { |
| pci_warn(php_slot->pdev, "Error %d getting FDT blob\n", ret); |
| goto free_fdt1; |
| } |
| |
| fdt = kmemdup(fdt1, fdt_totalsize(fdt1), GFP_KERNEL); |
| if (!fdt) { |
| ret = -ENOMEM; |
| goto free_fdt1; |
| } |
| |
| /* Unflatten device tree blob */ |
| dt = of_fdt_unflatten_tree(fdt, php_slot->dn, NULL); |
| if (!dt) { |
| ret = -EINVAL; |
| pci_warn(php_slot->pdev, "Cannot unflatten FDT\n"); |
| goto free_fdt; |
| } |
| |
| /* Initialize and apply the changeset */ |
| of_changeset_init(&php_slot->ocs); |
| pnv_php_reverse_nodes(php_slot->dn); |
| ret = pnv_php_populate_changeset(&php_slot->ocs, php_slot->dn); |
| if (ret) { |
| pnv_php_reverse_nodes(php_slot->dn); |
| pci_warn(php_slot->pdev, "Error %d populating changeset\n", |
| ret); |
| goto free_dt; |
| } |
| |
| php_slot->dn->child = NULL; |
| ret = of_changeset_apply(&php_slot->ocs); |
| if (ret) { |
| pci_warn(php_slot->pdev, "Error %d applying changeset\n", ret); |
| goto destroy_changeset; |
| } |
| |
| /* Add device node firmware data */ |
| pnv_php_add_pdns(php_slot); |
| php_slot->fdt = fdt; |
| php_slot->dt = dt; |
| kfree(fdt1); |
| goto out; |
| |
| destroy_changeset: |
| of_changeset_destroy(&php_slot->ocs); |
| free_dt: |
| kfree(dt); |
| php_slot->dn->child = NULL; |
| free_fdt: |
| kfree(fdt); |
| free_fdt1: |
| kfree(fdt1); |
| out: |
| return ret; |
| } |
| |
| static inline struct pnv_php_slot *to_pnv_php_slot(struct hotplug_slot *slot) |
| { |
| return container_of(slot, struct pnv_php_slot, slot); |
| } |
| |
| int pnv_php_set_slot_power_state(struct hotplug_slot *slot, |
| uint8_t state) |
| { |
| struct pnv_php_slot *php_slot = to_pnv_php_slot(slot); |
| struct opal_msg msg; |
| int ret; |
| |
| ret = pnv_pci_set_power_state(php_slot->id, state, &msg); |
| if (ret > 0) { |
| if (be64_to_cpu(msg.params[1]) != php_slot->dn->phandle || |
| be64_to_cpu(msg.params[2]) != state || |
| be64_to_cpu(msg.params[3]) != OPAL_SUCCESS) { |
| pci_warn(php_slot->pdev, "Wrong msg (%lld, %lld, %lld)\n", |
| be64_to_cpu(msg.params[1]), |
| be64_to_cpu(msg.params[2]), |
| be64_to_cpu(msg.params[3])); |
| return -ENOMSG; |
| } |
| } else if (ret < 0) { |
| pci_warn(php_slot->pdev, "Error %d powering %s\n", |
| ret, (state == OPAL_PCI_SLOT_POWER_ON) ? "on" : "off"); |
| return ret; |
| } |
| |
| if (state == OPAL_PCI_SLOT_POWER_OFF || state == OPAL_PCI_SLOT_OFFLINE) |
| pnv_php_rmv_devtree(php_slot); |
| else |
| ret = pnv_php_add_devtree(php_slot); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(pnv_php_set_slot_power_state); |
| |
| static int pnv_php_get_power_state(struct hotplug_slot *slot, u8 *state) |
| { |
| struct pnv_php_slot *php_slot = to_pnv_php_slot(slot); |
| uint8_t power_state = OPAL_PCI_SLOT_POWER_ON; |
| int ret; |
| |
| /* |
| * Retrieve power status from firmware. If we fail |
| * getting that, the power status fails back to |
| * be on. |
| */ |
| ret = pnv_pci_get_power_state(php_slot->id, &power_state); |
| if (ret) { |
| pci_warn(php_slot->pdev, "Error %d getting power status\n", |
| ret); |
| } else { |
| *state = power_state; |
| } |
| |
| return 0; |
| } |
| |
| static int pnv_php_get_adapter_state(struct hotplug_slot *slot, u8 *state) |
| { |
| struct pnv_php_slot *php_slot = to_pnv_php_slot(slot); |
| uint8_t presence = OPAL_PCI_SLOT_EMPTY; |
| int ret; |
| |
| /* |
| * Retrieve presence status from firmware. If we can't |
| * get that, it will fail back to be empty. |
| */ |
| ret = pnv_pci_get_presence_state(php_slot->id, &presence); |
| if (ret >= 0) { |
| *state = presence; |
| ret = 0; |
| } else { |
| pci_warn(php_slot->pdev, "Error %d getting presence\n", ret); |
| } |
| |
| return ret; |
| } |
| |
| static int pnv_php_get_attention_state(struct hotplug_slot *slot, u8 *state) |
| { |
| struct pnv_php_slot *php_slot = to_pnv_php_slot(slot); |
| |
| *state = php_slot->attention_state; |
| return 0; |
| } |
| |
| static int pnv_php_set_attention_state(struct hotplug_slot *slot, u8 state) |
| { |
| struct pnv_php_slot *php_slot = to_pnv_php_slot(slot); |
| struct pci_dev *bridge = php_slot->pdev; |
| u16 new, mask; |
| |
| php_slot->attention_state = state; |
| if (!bridge) |
| return 0; |
| |
| mask = PCI_EXP_SLTCTL_AIC; |
| |
| if (state) |
| new = PCI_EXP_SLTCTL_ATTN_IND_ON; |
| else |
| new = PCI_EXP_SLTCTL_ATTN_IND_OFF; |
| |
| pcie_capability_clear_and_set_word(bridge, PCI_EXP_SLTCTL, mask, new); |
| |
| return 0; |
| } |
| |
| static int pnv_php_enable(struct pnv_php_slot *php_slot, bool rescan) |
| { |
| struct hotplug_slot *slot = &php_slot->slot; |
| uint8_t presence = OPAL_PCI_SLOT_EMPTY; |
| uint8_t power_status = OPAL_PCI_SLOT_POWER_ON; |
| int ret; |
| |
| /* Check if the slot has been configured */ |
| if (php_slot->state != PNV_PHP_STATE_REGISTERED) |
| return 0; |
| |
| /* Retrieve slot presence status */ |
| ret = pnv_php_get_adapter_state(slot, &presence); |
| if (ret) |
| return ret; |
| |
| /* |
| * Proceed if there have nothing behind the slot. However, |
| * we should leave the slot in registered state at the |
| * beginning. Otherwise, the PCI devices inserted afterwards |
| * won't be probed and populated. |
| */ |
| if (presence == OPAL_PCI_SLOT_EMPTY) { |
| if (!php_slot->power_state_check) { |
| php_slot->power_state_check = true; |
| |
| return 0; |
| } |
| |
| goto scan; |
| } |
| |
| /* |
| * If the power supply to the slot is off, we can't detect |
| * adapter presence state. That means we have to turn the |
| * slot on before going to probe slot's presence state. |
| * |
| * On the first time, we don't change the power status to |
| * boost system boot with assumption that the firmware |
| * supplies consistent slot power status: empty slot always |
| * has its power off and non-empty slot has its power on. |
| */ |
| if (!php_slot->power_state_check) { |
| php_slot->power_state_check = true; |
| |
| ret = pnv_php_get_power_state(slot, &power_status); |
| if (ret) |
| return ret; |
| |
| if (power_status != OPAL_PCI_SLOT_POWER_ON) |
| return 0; |
| } |
| |
| /* Check the power status. Scan the slot if it is already on */ |
| ret = pnv_php_get_power_state(slot, &power_status); |
| if (ret) |
| return ret; |
| |
| if (power_status == OPAL_PCI_SLOT_POWER_ON) |
| goto scan; |
| |
| /* Power is off, turn it on and then scan the slot */ |
| ret = pnv_php_set_slot_power_state(slot, OPAL_PCI_SLOT_POWER_ON); |
| if (ret) |
| return ret; |
| |
| scan: |
| if (presence == OPAL_PCI_SLOT_PRESENT) { |
| if (rescan) { |
| pci_lock_rescan_remove(); |
| pci_hp_add_devices(php_slot->bus); |
| pci_unlock_rescan_remove(); |
| } |
| |
| /* Rescan for child hotpluggable slots */ |
| php_slot->state = PNV_PHP_STATE_POPULATED; |
| if (rescan) |
| pnv_php_register(php_slot->dn); |
| } else { |
| php_slot->state = PNV_PHP_STATE_POPULATED; |
| } |
| |
| return 0; |
| } |
| |
| static int pnv_php_reset_slot(struct hotplug_slot *slot, int probe) |
| { |
| struct pnv_php_slot *php_slot = to_pnv_php_slot(slot); |
| struct pci_dev *bridge = php_slot->pdev; |
| uint16_t sts; |
| |
| /* |
| * The CAPI folks want pnv_php to drive OpenCAPI slots |
| * which don't have a bridge. Only claim to support |
| * reset_slot() if we have a bridge device (for now...) |
| */ |
| if (probe) |
| return !bridge; |
| |
| /* mask our interrupt while resetting the bridge */ |
| if (php_slot->irq > 0) |
| disable_irq(php_slot->irq); |
| |
| pci_bridge_secondary_bus_reset(bridge); |
| |
| /* clear any state changes that happened due to the reset */ |
| pcie_capability_read_word(php_slot->pdev, PCI_EXP_SLTSTA, &sts); |
| sts &= (PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC); |
| pcie_capability_write_word(php_slot->pdev, PCI_EXP_SLTSTA, sts); |
| |
| if (php_slot->irq > 0) |
| enable_irq(php_slot->irq); |
| |
| return 0; |
| } |
| |
| static int pnv_php_enable_slot(struct hotplug_slot *slot) |
| { |
| struct pnv_php_slot *php_slot = to_pnv_php_slot(slot); |
| |
| return pnv_php_enable(php_slot, true); |
| } |
| |
| static int pnv_php_disable_slot(struct hotplug_slot *slot) |
| { |
| struct pnv_php_slot *php_slot = to_pnv_php_slot(slot); |
| int ret; |
| |
| if (php_slot->state != PNV_PHP_STATE_POPULATED) |
| return 0; |
| |
| /* Remove all devices behind the slot */ |
| pci_lock_rescan_remove(); |
| pci_hp_remove_devices(php_slot->bus); |
| pci_unlock_rescan_remove(); |
| |
| /* Detach the child hotpluggable slots */ |
| pnv_php_unregister(php_slot->dn); |
| |
| /* Notify firmware and remove device nodes */ |
| ret = pnv_php_set_slot_power_state(slot, OPAL_PCI_SLOT_POWER_OFF); |
| |
| php_slot->state = PNV_PHP_STATE_REGISTERED; |
| return ret; |
| } |
| |
| static const struct hotplug_slot_ops php_slot_ops = { |
| .get_power_status = pnv_php_get_power_state, |
| .get_adapter_status = pnv_php_get_adapter_state, |
| .get_attention_status = pnv_php_get_attention_state, |
| .set_attention_status = pnv_php_set_attention_state, |
| .enable_slot = pnv_php_enable_slot, |
| .disable_slot = pnv_php_disable_slot, |
| .reset_slot = pnv_php_reset_slot, |
| }; |
| |
| static void pnv_php_release(struct pnv_php_slot *php_slot) |
| { |
| unsigned long flags; |
| |
| /* Remove from global or child list */ |
| spin_lock_irqsave(&pnv_php_lock, flags); |
| list_del(&php_slot->link); |
| spin_unlock_irqrestore(&pnv_php_lock, flags); |
| |
| /* Detach from parent */ |
| pnv_php_put_slot(php_slot); |
| pnv_php_put_slot(php_slot->parent); |
| } |
| |
| static struct pnv_php_slot *pnv_php_alloc_slot(struct device_node *dn) |
| { |
| struct pnv_php_slot *php_slot; |
| struct pci_bus *bus; |
| const char *label; |
| uint64_t id; |
| int ret; |
| |
| ret = of_property_read_string(dn, "ibm,slot-label", &label); |
| if (ret) |
| return NULL; |
| |
| if (pnv_pci_get_slot_id(dn, &id)) |
| return NULL; |
| |
| bus = pci_find_bus_by_node(dn); |
| if (!bus) |
| return NULL; |
| |
| php_slot = kzalloc(sizeof(*php_slot), GFP_KERNEL); |
| if (!php_slot) |
| return NULL; |
| |
| php_slot->name = kstrdup(label, GFP_KERNEL); |
| if (!php_slot->name) { |
| kfree(php_slot); |
| return NULL; |
| } |
| |
| if (dn->child && PCI_DN(dn->child)) |
| php_slot->slot_no = PCI_SLOT(PCI_DN(dn->child)->devfn); |
| else |
| php_slot->slot_no = -1; /* Placeholder slot */ |
| |
| kref_init(&php_slot->kref); |
| php_slot->state = PNV_PHP_STATE_INITIALIZED; |
| php_slot->dn = dn; |
| php_slot->pdev = bus->self; |
| php_slot->bus = bus; |
| php_slot->id = id; |
| php_slot->power_state_check = false; |
| php_slot->slot.ops = &php_slot_ops; |
| |
| INIT_LIST_HEAD(&php_slot->children); |
| INIT_LIST_HEAD(&php_slot->link); |
| |
| return php_slot; |
| } |
| |
| static int pnv_php_register_slot(struct pnv_php_slot *php_slot) |
| { |
| struct pnv_php_slot *parent; |
| struct device_node *dn = php_slot->dn; |
| unsigned long flags; |
| int ret; |
| |
| /* Check if the slot is registered or not */ |
| parent = pnv_php_find_slot(php_slot->dn); |
| if (parent) { |
| pnv_php_put_slot(parent); |
| return -EEXIST; |
| } |
| |
| /* Register PCI slot */ |
| ret = pci_hp_register(&php_slot->slot, php_slot->bus, |
| php_slot->slot_no, php_slot->name); |
| if (ret) { |
| pci_warn(php_slot->pdev, "Error %d registering slot\n", ret); |
| return ret; |
| } |
| |
| /* Attach to the parent's child list or global list */ |
| while ((dn = of_get_parent(dn))) { |
| if (!PCI_DN(dn)) { |
| of_node_put(dn); |
| break; |
| } |
| |
| parent = pnv_php_find_slot(dn); |
| if (parent) { |
| of_node_put(dn); |
| break; |
| } |
| |
| of_node_put(dn); |
| } |
| |
| spin_lock_irqsave(&pnv_php_lock, flags); |
| php_slot->parent = parent; |
| if (parent) |
| list_add_tail(&php_slot->link, &parent->children); |
| else |
| list_add_tail(&php_slot->link, &pnv_php_slot_list); |
| spin_unlock_irqrestore(&pnv_php_lock, flags); |
| |
| php_slot->state = PNV_PHP_STATE_REGISTERED; |
| return 0; |
| } |
| |
| static int pnv_php_enable_msix(struct pnv_php_slot *php_slot) |
| { |
| struct pci_dev *pdev = php_slot->pdev; |
| struct msix_entry entry; |
| int nr_entries, ret; |
| u16 pcie_flag; |
| |
| /* Get total number of MSIx entries */ |
| nr_entries = pci_msix_vec_count(pdev); |
| if (nr_entries < 0) |
| return nr_entries; |
| |
| /* Check hotplug MSIx entry is in range */ |
| pcie_capability_read_word(pdev, PCI_EXP_FLAGS, &pcie_flag); |
| entry.entry = (pcie_flag & PCI_EXP_FLAGS_IRQ) >> 9; |
| if (entry.entry >= nr_entries) |
| return -ERANGE; |
| |
| /* Enable MSIx */ |
| ret = pci_enable_msix_exact(pdev, &entry, 1); |
| if (ret) { |
| pci_warn(pdev, "Error %d enabling MSIx\n", ret); |
| return ret; |
| } |
| |
| return entry.vector; |
| } |
| |
| static void pnv_php_event_handler(struct work_struct *work) |
| { |
| struct pnv_php_event *event = |
| container_of(work, struct pnv_php_event, work); |
| struct pnv_php_slot *php_slot = event->php_slot; |
| |
| if (event->added) |
| pnv_php_enable_slot(&php_slot->slot); |
| else |
| pnv_php_disable_slot(&php_slot->slot); |
| |
| kfree(event); |
| } |
| |
| static irqreturn_t pnv_php_interrupt(int irq, void *data) |
| { |
| struct pnv_php_slot *php_slot = data; |
| struct pci_dev *pchild, *pdev = php_slot->pdev; |
| struct eeh_dev *edev; |
| struct eeh_pe *pe; |
| struct pnv_php_event *event; |
| u16 sts, lsts; |
| u8 presence; |
| bool added; |
| unsigned long flags; |
| int ret; |
| |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &sts); |
| sts &= (PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC); |
| pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, sts); |
| |
| pci_dbg(pdev, "PCI slot [%s]: HP int! DLAct: %d, PresDet: %d\n", |
| php_slot->name, |
| !!(sts & PCI_EXP_SLTSTA_DLLSC), |
| !!(sts & PCI_EXP_SLTSTA_PDC)); |
| |
| if (sts & PCI_EXP_SLTSTA_DLLSC) { |
| pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lsts); |
| added = !!(lsts & PCI_EXP_LNKSTA_DLLLA); |
| } else if (!(php_slot->flags & PNV_PHP_FLAG_BROKEN_PDC) && |
| (sts & PCI_EXP_SLTSTA_PDC)) { |
| ret = pnv_pci_get_presence_state(php_slot->id, &presence); |
| if (ret) { |
| pci_warn(pdev, "PCI slot [%s] error %d getting presence (0x%04x), to retry the operation.\n", |
| php_slot->name, ret, sts); |
| return IRQ_HANDLED; |
| } |
| |
| added = !!(presence == OPAL_PCI_SLOT_PRESENT); |
| } else { |
| pci_dbg(pdev, "PCI slot [%s]: Spurious IRQ?\n", php_slot->name); |
| return IRQ_NONE; |
| } |
| |
| /* Freeze the removed PE to avoid unexpected error reporting */ |
| if (!added) { |
| pchild = list_first_entry_or_null(&php_slot->bus->devices, |
| struct pci_dev, bus_list); |
| edev = pchild ? pci_dev_to_eeh_dev(pchild) : NULL; |
| pe = edev ? edev->pe : NULL; |
| if (pe) { |
| eeh_serialize_lock(&flags); |
| eeh_pe_mark_isolated(pe); |
| eeh_serialize_unlock(flags); |
| eeh_pe_set_option(pe, EEH_OPT_FREEZE_PE); |
| } |
| } |
| |
| /* |
| * The PE is left in frozen state if the event is missed. It's |
| * fine as the PCI devices (PE) aren't functional any more. |
| */ |
| event = kzalloc(sizeof(*event), GFP_ATOMIC); |
| if (!event) { |
| pci_warn(pdev, "PCI slot [%s] missed hotplug event 0x%04x\n", |
| php_slot->name, sts); |
| return IRQ_HANDLED; |
| } |
| |
| pci_info(pdev, "PCI slot [%s] %s (IRQ: %d)\n", |
| php_slot->name, added ? "added" : "removed", irq); |
| INIT_WORK(&event->work, pnv_php_event_handler); |
| event->added = added; |
| event->php_slot = php_slot; |
| queue_work(php_slot->wq, &event->work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void pnv_php_init_irq(struct pnv_php_slot *php_slot, int irq) |
| { |
| struct pci_dev *pdev = php_slot->pdev; |
| u32 broken_pdc = 0; |
| u16 sts, ctrl; |
| int ret; |
| |
| /* Allocate workqueue */ |
| php_slot->wq = alloc_workqueue("pciehp-%s", 0, 0, php_slot->name); |
| if (!php_slot->wq) { |
| pci_warn(pdev, "Cannot alloc workqueue\n"); |
| pnv_php_disable_irq(php_slot, true); |
| return; |
| } |
| |
| /* Check PDC (Presence Detection Change) is broken or not */ |
| ret = of_property_read_u32(php_slot->dn, "ibm,slot-broken-pdc", |
| &broken_pdc); |
| if (!ret && broken_pdc) |
| php_slot->flags |= PNV_PHP_FLAG_BROKEN_PDC; |
| |
| /* Clear pending interrupts */ |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &sts); |
| if (php_slot->flags & PNV_PHP_FLAG_BROKEN_PDC) |
| sts |= PCI_EXP_SLTSTA_DLLSC; |
| else |
| sts |= (PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC); |
| pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, sts); |
| |
| /* Request the interrupt */ |
| ret = request_irq(irq, pnv_php_interrupt, IRQF_SHARED, |
| php_slot->name, php_slot); |
| if (ret) { |
| pnv_php_disable_irq(php_slot, true); |
| pci_warn(pdev, "Error %d enabling IRQ %d\n", ret, irq); |
| return; |
| } |
| |
| /* Enable the interrupts */ |
| pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &ctrl); |
| if (php_slot->flags & PNV_PHP_FLAG_BROKEN_PDC) { |
| ctrl &= ~PCI_EXP_SLTCTL_PDCE; |
| ctrl |= (PCI_EXP_SLTCTL_HPIE | |
| PCI_EXP_SLTCTL_DLLSCE); |
| } else { |
| ctrl |= (PCI_EXP_SLTCTL_HPIE | |
| PCI_EXP_SLTCTL_PDCE | |
| PCI_EXP_SLTCTL_DLLSCE); |
| } |
| pcie_capability_write_word(pdev, PCI_EXP_SLTCTL, ctrl); |
| |
| /* The interrupt is initialized successfully when @irq is valid */ |
| php_slot->irq = irq; |
| } |
| |
| static void pnv_php_enable_irq(struct pnv_php_slot *php_slot) |
| { |
| struct pci_dev *pdev = php_slot->pdev; |
| int irq, ret; |
| |
| /* |
| * The MSI/MSIx interrupt might have been occupied by other |
| * drivers. Don't populate the surprise hotplug capability |
| * in that case. |
| */ |
| if (pci_dev_msi_enabled(pdev)) |
| return; |
| |
| ret = pci_enable_device(pdev); |
| if (ret) { |
| pci_warn(pdev, "Error %d enabling device\n", ret); |
| return; |
| } |
| |
| pci_set_master(pdev); |
| |
| /* Enable MSIx interrupt */ |
| irq = pnv_php_enable_msix(php_slot); |
| if (irq > 0) { |
| pnv_php_init_irq(php_slot, irq); |
| return; |
| } |
| |
| /* |
| * Use MSI if MSIx doesn't work. Fail back to legacy INTx |
| * if MSI doesn't work either |
| */ |
| ret = pci_enable_msi(pdev); |
| if (!ret || pdev->irq) { |
| irq = pdev->irq; |
| pnv_php_init_irq(php_slot, irq); |
| } |
| } |
| |
| static int pnv_php_register_one(struct device_node *dn) |
| { |
| struct pnv_php_slot *php_slot; |
| u32 prop32; |
| int ret; |
| |
| /* Check if it's hotpluggable slot */ |
| ret = of_property_read_u32(dn, "ibm,slot-pluggable", &prop32); |
| if (ret || !prop32) |
| return -ENXIO; |
| |
| ret = of_property_read_u32(dn, "ibm,reset-by-firmware", &prop32); |
| if (ret || !prop32) |
| return -ENXIO; |
| |
| php_slot = pnv_php_alloc_slot(dn); |
| if (!php_slot) |
| return -ENODEV; |
| |
| ret = pnv_php_register_slot(php_slot); |
| if (ret) |
| goto free_slot; |
| |
| ret = pnv_php_enable(php_slot, false); |
| if (ret) |
| goto unregister_slot; |
| |
| /* Enable interrupt if the slot supports surprise hotplug */ |
| ret = of_property_read_u32(dn, "ibm,slot-surprise-pluggable", &prop32); |
| if (!ret && prop32) |
| pnv_php_enable_irq(php_slot); |
| |
| return 0; |
| |
| unregister_slot: |
| pnv_php_unregister_one(php_slot->dn); |
| free_slot: |
| pnv_php_put_slot(php_slot); |
| return ret; |
| } |
| |
| static void pnv_php_register(struct device_node *dn) |
| { |
| struct device_node *child; |
| |
| /* |
| * The parent slots should be registered before their |
| * child slots. |
| */ |
| for_each_child_of_node(dn, child) { |
| pnv_php_register_one(child); |
| pnv_php_register(child); |
| } |
| } |
| |
| static void pnv_php_unregister_one(struct device_node *dn) |
| { |
| struct pnv_php_slot *php_slot; |
| |
| php_slot = pnv_php_find_slot(dn); |
| if (!php_slot) |
| return; |
| |
| php_slot->state = PNV_PHP_STATE_OFFLINE; |
| pci_hp_deregister(&php_slot->slot); |
| pnv_php_release(php_slot); |
| pnv_php_put_slot(php_slot); |
| } |
| |
| static void pnv_php_unregister(struct device_node *dn) |
| { |
| struct device_node *child; |
| |
| /* The child slots should go before their parent slots */ |
| for_each_child_of_node(dn, child) { |
| pnv_php_unregister(child); |
| pnv_php_unregister_one(child); |
| } |
| } |
| |
| static int __init pnv_php_init(void) |
| { |
| struct device_node *dn; |
| |
| pr_info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); |
| for_each_compatible_node(dn, NULL, "ibm,ioda2-phb") |
| pnv_php_register(dn); |
| |
| for_each_compatible_node(dn, NULL, "ibm,ioda3-phb") |
| pnv_php_register(dn); |
| |
| return 0; |
| } |
| |
| static void __exit pnv_php_exit(void) |
| { |
| struct device_node *dn; |
| |
| for_each_compatible_node(dn, NULL, "ibm,ioda2-phb") |
| pnv_php_unregister(dn); |
| |
| for_each_compatible_node(dn, NULL, "ibm,ioda3-phb") |
| pnv_php_unregister(dn); |
| } |
| |
| module_init(pnv_php_init); |
| module_exit(pnv_php_exit); |
| |
| MODULE_VERSION(DRIVER_VERSION); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |