| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright 2023 Ondrej Zary |
| * based on paride.c by Grant R. Guenther <grant@torque.net> |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/parport.h> |
| #include "pata_parport.h" |
| |
| #define DRV_NAME "pata_parport" |
| |
| static DEFINE_IDR(parport_list); |
| static DEFINE_IDR(protocols); |
| static DEFINE_IDA(pata_parport_bus_dev_ids); |
| static DEFINE_MUTEX(pi_mutex); |
| |
| static bool probe = true; |
| module_param(probe, bool, 0644); |
| MODULE_PARM_DESC(probe, "Enable automatic device probing (0=off, 1=on [default])"); |
| |
| /* |
| * libata drivers cannot sleep so this driver claims parport before activating |
| * the ata host and keeps it claimed (and protocol connected) until the ata |
| * host is removed. Unfortunately, this means that you cannot use any chained |
| * devices (neither other pata_parport devices nor a printer). |
| */ |
| static void pi_connect(struct pi_adapter *pi) |
| { |
| parport_claim_or_block(pi->pardev); |
| pi->proto->connect(pi); |
| } |
| |
| static void pi_disconnect(struct pi_adapter *pi) |
| { |
| pi->proto->disconnect(pi); |
| parport_release(pi->pardev); |
| } |
| |
| static void pata_parport_dev_select(struct ata_port *ap, unsigned int device) |
| { |
| struct pi_adapter *pi = ap->host->private_data; |
| u8 tmp; |
| |
| if (device == 0) |
| tmp = ATA_DEVICE_OBS; |
| else |
| tmp = ATA_DEVICE_OBS | ATA_DEV1; |
| |
| pi->proto->write_regr(pi, 0, ATA_REG_DEVICE, tmp); |
| ata_sff_pause(ap); |
| } |
| |
| static void pata_parport_set_devctl(struct ata_port *ap, u8 ctl) |
| { |
| struct pi_adapter *pi = ap->host->private_data; |
| |
| pi->proto->write_regr(pi, 1, 6, ctl); |
| } |
| |
| static bool pata_parport_devchk(struct ata_port *ap, unsigned int device) |
| { |
| struct pi_adapter *pi = ap->host->private_data; |
| u8 nsect, lbal; |
| |
| pata_parport_dev_select(ap, device); |
| |
| pi->proto->write_regr(pi, 0, ATA_REG_NSECT, 0x55); |
| pi->proto->write_regr(pi, 0, ATA_REG_LBAL, 0xaa); |
| |
| pi->proto->write_regr(pi, 0, ATA_REG_NSECT, 0xaa); |
| pi->proto->write_regr(pi, 0, ATA_REG_LBAL, 0x55); |
| |
| pi->proto->write_regr(pi, 0, ATA_REG_NSECT, 0x55); |
| pi->proto->write_regr(pi, 0, ATA_REG_LBAL, 0xaa); |
| |
| nsect = pi->proto->read_regr(pi, 0, ATA_REG_NSECT); |
| lbal = pi->proto->read_regr(pi, 0, ATA_REG_LBAL); |
| |
| return (nsect == 0x55) && (lbal == 0xaa); |
| } |
| |
| static int pata_parport_wait_after_reset(struct ata_link *link, |
| unsigned int devmask, |
| unsigned long deadline) |
| { |
| struct ata_port *ap = link->ap; |
| struct pi_adapter *pi = ap->host->private_data; |
| unsigned int dev0 = devmask & (1 << 0); |
| unsigned int dev1 = devmask & (1 << 1); |
| int rc, ret = 0; |
| |
| ata_msleep(ap, ATA_WAIT_AFTER_RESET); |
| |
| /* always check readiness of the master device */ |
| rc = ata_sff_wait_ready(link, deadline); |
| if (rc) { |
| /* |
| * some adapters return bogus values if master device is not |
| * present, so don't abort now if a slave device is present |
| */ |
| if (!dev1) |
| return rc; |
| ret = -ENODEV; |
| } |
| |
| /* |
| * if device 1 was found in ata_devchk, wait for register |
| * access briefly, then wait for BSY to clear. |
| */ |
| if (dev1) { |
| int i; |
| |
| pata_parport_dev_select(ap, 1); |
| |
| /* |
| * Wait for register access. Some ATAPI devices fail |
| * to set nsect/lbal after reset, so don't waste too |
| * much time on it. We're gonna wait for !BSY anyway. |
| */ |
| for (i = 0; i < 2; i++) { |
| u8 nsect, lbal; |
| |
| nsect = pi->proto->read_regr(pi, 0, ATA_REG_NSECT); |
| lbal = pi->proto->read_regr(pi, 0, ATA_REG_LBAL); |
| if (nsect == 1 && lbal == 1) |
| break; |
| /* give drive a breather */ |
| ata_msleep(ap, 50); |
| } |
| |
| rc = ata_sff_wait_ready(link, deadline); |
| if (rc) { |
| if (rc != -ENODEV) |
| return rc; |
| ret = rc; |
| } |
| } |
| |
| pata_parport_dev_select(ap, 0); |
| if (dev1) |
| pata_parport_dev_select(ap, 1); |
| if (dev0) |
| pata_parport_dev_select(ap, 0); |
| |
| return ret; |
| } |
| |
| static int pata_parport_bus_softreset(struct ata_port *ap, unsigned int devmask, |
| unsigned long deadline) |
| { |
| struct pi_adapter *pi = ap->host->private_data; |
| |
| /* software reset. causes dev0 to be selected */ |
| pi->proto->write_regr(pi, 1, 6, ap->ctl); |
| udelay(20); |
| pi->proto->write_regr(pi, 1, 6, ap->ctl | ATA_SRST); |
| udelay(20); |
| pi->proto->write_regr(pi, 1, 6, ap->ctl); |
| ap->last_ctl = ap->ctl; |
| |
| /* wait the port to become ready */ |
| return pata_parport_wait_after_reset(&ap->link, devmask, deadline); |
| } |
| |
| static int pata_parport_softreset(struct ata_link *link, unsigned int *classes, |
| unsigned long deadline) |
| { |
| struct ata_port *ap = link->ap; |
| unsigned int devmask = 0; |
| int rc; |
| u8 err; |
| |
| /* determine if device 0/1 are present */ |
| if (pata_parport_devchk(ap, 0)) |
| devmask |= (1 << 0); |
| if (pata_parport_devchk(ap, 1)) |
| devmask |= (1 << 1); |
| |
| /* select device 0 again */ |
| pata_parport_dev_select(ap, 0); |
| |
| /* issue bus reset */ |
| rc = pata_parport_bus_softreset(ap, devmask, deadline); |
| if (rc && rc != -ENODEV) { |
| ata_link_err(link, "SRST failed (errno=%d)\n", rc); |
| return rc; |
| } |
| |
| /* determine by signature whether we have ATA or ATAPI devices */ |
| classes[0] = ata_sff_dev_classify(&link->device[0], |
| devmask & (1 << 0), &err); |
| if (err != 0x81) |
| classes[1] = ata_sff_dev_classify(&link->device[1], |
| devmask & (1 << 1), &err); |
| |
| return 0; |
| } |
| |
| static u8 pata_parport_check_status(struct ata_port *ap) |
| { |
| struct pi_adapter *pi = ap->host->private_data; |
| |
| return pi->proto->read_regr(pi, 0, ATA_REG_STATUS); |
| } |
| |
| static u8 pata_parport_check_altstatus(struct ata_port *ap) |
| { |
| struct pi_adapter *pi = ap->host->private_data; |
| |
| return pi->proto->read_regr(pi, 1, 6); |
| } |
| |
| static void pata_parport_tf_load(struct ata_port *ap, |
| const struct ata_taskfile *tf) |
| { |
| struct pi_adapter *pi = ap->host->private_data; |
| |
| if (tf->ctl != ap->last_ctl) { |
| pi->proto->write_regr(pi, 1, 6, tf->ctl); |
| ap->last_ctl = tf->ctl; |
| ata_wait_idle(ap); |
| } |
| |
| if (tf->flags & ATA_TFLAG_ISADDR) { |
| if (tf->flags & ATA_TFLAG_LBA48) { |
| pi->proto->write_regr(pi, 0, ATA_REG_FEATURE, |
| tf->hob_feature); |
| pi->proto->write_regr(pi, 0, ATA_REG_NSECT, |
| tf->hob_nsect); |
| pi->proto->write_regr(pi, 0, ATA_REG_LBAL, |
| tf->hob_lbal); |
| pi->proto->write_regr(pi, 0, ATA_REG_LBAM, |
| tf->hob_lbam); |
| pi->proto->write_regr(pi, 0, ATA_REG_LBAH, |
| tf->hob_lbah); |
| } |
| pi->proto->write_regr(pi, 0, ATA_REG_FEATURE, tf->feature); |
| pi->proto->write_regr(pi, 0, ATA_REG_NSECT, tf->nsect); |
| pi->proto->write_regr(pi, 0, ATA_REG_LBAL, tf->lbal); |
| pi->proto->write_regr(pi, 0, ATA_REG_LBAM, tf->lbam); |
| pi->proto->write_regr(pi, 0, ATA_REG_LBAH, tf->lbah); |
| } |
| |
| if (tf->flags & ATA_TFLAG_DEVICE) |
| pi->proto->write_regr(pi, 0, ATA_REG_DEVICE, tf->device); |
| |
| ata_wait_idle(ap); |
| } |
| |
| static void pata_parport_tf_read(struct ata_port *ap, struct ata_taskfile *tf) |
| { |
| struct pi_adapter *pi = ap->host->private_data; |
| |
| tf->status = pi->proto->read_regr(pi, 0, ATA_REG_STATUS); |
| tf->error = pi->proto->read_regr(pi, 0, ATA_REG_ERR); |
| tf->nsect = pi->proto->read_regr(pi, 0, ATA_REG_NSECT); |
| tf->lbal = pi->proto->read_regr(pi, 0, ATA_REG_LBAL); |
| tf->lbam = pi->proto->read_regr(pi, 0, ATA_REG_LBAM); |
| tf->lbah = pi->proto->read_regr(pi, 0, ATA_REG_LBAH); |
| tf->device = pi->proto->read_regr(pi, 0, ATA_REG_DEVICE); |
| |
| if (tf->flags & ATA_TFLAG_LBA48) { |
| pi->proto->write_regr(pi, 1, 6, tf->ctl | ATA_HOB); |
| tf->hob_feature = pi->proto->read_regr(pi, 0, ATA_REG_ERR); |
| tf->hob_nsect = pi->proto->read_regr(pi, 0, ATA_REG_NSECT); |
| tf->hob_lbal = pi->proto->read_regr(pi, 0, ATA_REG_LBAL); |
| tf->hob_lbam = pi->proto->read_regr(pi, 0, ATA_REG_LBAM); |
| tf->hob_lbah = pi->proto->read_regr(pi, 0, ATA_REG_LBAH); |
| pi->proto->write_regr(pi, 1, 6, tf->ctl); |
| ap->last_ctl = tf->ctl; |
| } |
| } |
| |
| static void pata_parport_exec_command(struct ata_port *ap, |
| const struct ata_taskfile *tf) |
| { |
| struct pi_adapter *pi = ap->host->private_data; |
| |
| pi->proto->write_regr(pi, 0, ATA_REG_CMD, tf->command); |
| ata_sff_pause(ap); |
| } |
| |
| static unsigned int pata_parport_data_xfer(struct ata_queued_cmd *qc, |
| unsigned char *buf, unsigned int buflen, int rw) |
| { |
| struct ata_port *ap = qc->dev->link->ap; |
| struct pi_adapter *pi = ap->host->private_data; |
| |
| if (rw == READ) |
| pi->proto->read_block(pi, buf, buflen); |
| else |
| pi->proto->write_block(pi, buf, buflen); |
| |
| return buflen; |
| } |
| |
| static void pata_parport_drain_fifo(struct ata_queued_cmd *qc) |
| { |
| int count; |
| struct ata_port *ap; |
| struct pi_adapter *pi; |
| char junk[2]; |
| |
| /* We only need to flush incoming data when a command was running */ |
| if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE) |
| return; |
| |
| ap = qc->ap; |
| pi = ap->host->private_data; |
| /* Drain up to 64K of data before we give up this recovery method */ |
| for (count = 0; (pata_parport_check_status(ap) & ATA_DRQ) |
| && count < 65536; count += 2) { |
| pi->proto->read_block(pi, junk, 2); |
| } |
| |
| if (count) |
| ata_port_dbg(ap, "drained %d bytes to clear DRQ\n", count); |
| } |
| |
| static struct ata_port_operations pata_parport_port_ops = { |
| .inherits = &ata_sff_port_ops, |
| |
| .softreset = pata_parport_softreset, |
| .hardreset = NULL, |
| |
| .sff_dev_select = pata_parport_dev_select, |
| .sff_set_devctl = pata_parport_set_devctl, |
| .sff_check_status = pata_parport_check_status, |
| .sff_check_altstatus = pata_parport_check_altstatus, |
| .sff_tf_load = pata_parport_tf_load, |
| .sff_tf_read = pata_parport_tf_read, |
| .sff_exec_command = pata_parport_exec_command, |
| .sff_data_xfer = pata_parport_data_xfer, |
| .sff_drain_fifo = pata_parport_drain_fifo, |
| }; |
| |
| static const struct ata_port_info pata_parport_port_info = { |
| .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_POLLING, |
| .pio_mask = ATA_PIO0, |
| /* No DMA */ |
| .port_ops = &pata_parport_port_ops, |
| }; |
| |
| static void pi_release(struct pi_adapter *pi) |
| { |
| parport_unregister_device(pi->pardev); |
| if (pi->proto->release_proto) |
| pi->proto->release_proto(pi); |
| module_put(pi->proto->owner); |
| } |
| |
| static int default_test_proto(struct pi_adapter *pi) |
| { |
| int j, k; |
| int e[2] = { 0, 0 }; |
| |
| pi->proto->connect(pi); |
| |
| for (j = 0; j < 2; j++) { |
| pi->proto->write_regr(pi, 0, 6, 0xa0 + j * 0x10); |
| for (k = 0; k < 256; k++) { |
| pi->proto->write_regr(pi, 0, 2, k ^ 0xaa); |
| pi->proto->write_regr(pi, 0, 3, k ^ 0x55); |
| if (pi->proto->read_regr(pi, 0, 2) != (k ^ 0xaa)) |
| e[j]++; |
| } |
| } |
| pi->proto->disconnect(pi); |
| |
| dev_dbg(&pi->dev, "%s: port 0x%x, mode %d, test=(%d,%d)\n", |
| pi->proto->name, pi->port, pi->mode, e[0], e[1]); |
| |
| return e[0] && e[1]; /* not here if both > 0 */ |
| } |
| |
| static int pi_test_proto(struct pi_adapter *pi) |
| { |
| int res; |
| |
| parport_claim_or_block(pi->pardev); |
| if (pi->proto->test_proto) |
| res = pi->proto->test_proto(pi); |
| else |
| res = default_test_proto(pi); |
| parport_release(pi->pardev); |
| |
| return res; |
| } |
| |
| static bool pi_probe_mode(struct pi_adapter *pi, int max) |
| { |
| int best, range; |
| |
| if (pi->mode != -1) { |
| if (pi->mode >= max) |
| return false; |
| range = 3; |
| if (pi->mode >= pi->proto->epp_first) |
| range = 8; |
| if (range == 8 && pi->port % 8) |
| return false; |
| return !pi_test_proto(pi); |
| } |
| best = -1; |
| for (pi->mode = 0; pi->mode < max; pi->mode++) { |
| range = 3; |
| if (pi->mode >= pi->proto->epp_first) |
| range = 8; |
| if (range == 8 && pi->port % 8) |
| break; |
| if (!pi_test_proto(pi)) |
| best = pi->mode; |
| } |
| pi->mode = best; |
| return best > -1; |
| } |
| |
| static bool pi_probe_unit(struct pi_adapter *pi, int unit) |
| { |
| int max, s, e; |
| |
| s = unit; |
| e = s + 1; |
| |
| if (s == -1) { |
| s = 0; |
| e = pi->proto->max_units; |
| } |
| |
| if (pi->proto->test_port) { |
| parport_claim_or_block(pi->pardev); |
| max = pi->proto->test_port(pi); |
| parport_release(pi->pardev); |
| } else { |
| max = pi->proto->max_mode; |
| } |
| |
| if (pi->proto->probe_unit) { |
| parport_claim_or_block(pi->pardev); |
| for (pi->unit = s; pi->unit < e; pi->unit++) { |
| if (pi->proto->probe_unit(pi)) { |
| parport_release(pi->pardev); |
| return pi_probe_mode(pi, max); |
| } |
| } |
| parport_release(pi->pardev); |
| return false; |
| } |
| |
| return pi_probe_mode(pi, max); |
| } |
| |
| static void pata_parport_dev_release(struct device *dev) |
| { |
| struct pi_adapter *pi = container_of(dev, struct pi_adapter, dev); |
| |
| ida_free(&pata_parport_bus_dev_ids, dev->id); |
| kfree(pi); |
| } |
| |
| static void pata_parport_bus_release(struct device *dev) |
| { |
| /* nothing to do here but required to avoid warning on device removal */ |
| } |
| |
| static const struct bus_type pata_parport_bus_type = { |
| .name = DRV_NAME, |
| }; |
| |
| static struct device pata_parport_bus = { |
| .init_name = DRV_NAME, |
| .release = pata_parport_bus_release, |
| }; |
| |
| static const struct scsi_host_template pata_parport_sht = { |
| PATA_PARPORT_SHT("pata_parport") |
| }; |
| |
| struct pi_device_match { |
| struct parport *parport; |
| struct pi_protocol *proto; |
| }; |
| |
| static int pi_find_dev(struct device *dev, void *data) |
| { |
| struct pi_adapter *pi = container_of(dev, struct pi_adapter, dev); |
| struct pi_device_match *match = data; |
| |
| return pi->pardev->port == match->parport && pi->proto == match->proto; |
| } |
| |
| static struct pi_adapter *pi_init_one(struct parport *parport, |
| struct pi_protocol *pr, int mode, int unit, int delay) |
| { |
| struct pardev_cb par_cb = { }; |
| const struct ata_port_info *ppi[] = { &pata_parport_port_info }; |
| struct ata_host *host; |
| struct pi_adapter *pi; |
| struct pi_device_match match = { .parport = parport, .proto = pr }; |
| int id; |
| |
| /* |
| * Abort if there's a device already registered on the same parport |
| * using the same protocol. |
| */ |
| if (bus_for_each_dev(&pata_parport_bus_type, NULL, &match, pi_find_dev)) |
| return NULL; |
| |
| id = ida_alloc(&pata_parport_bus_dev_ids, GFP_KERNEL); |
| if (id < 0) |
| return NULL; |
| |
| pi = kzalloc(sizeof(struct pi_adapter), GFP_KERNEL); |
| if (!pi) { |
| ida_free(&pata_parport_bus_dev_ids, id); |
| return NULL; |
| } |
| |
| /* set up pi->dev before pi_probe_unit() so it can use dev_printk() */ |
| pi->dev.parent = &pata_parport_bus; |
| pi->dev.bus = &pata_parport_bus_type; |
| pi->dev.driver = &pr->driver; |
| pi->dev.release = pata_parport_dev_release; |
| pi->dev.id = id; |
| dev_set_name(&pi->dev, "pata_parport.%u", pi->dev.id); |
| if (device_register(&pi->dev)) { |
| put_device(&pi->dev); |
| /* pata_parport_dev_release will do ida_free(dev->id) and kfree(pi) */ |
| return NULL; |
| } |
| |
| pi->proto = pr; |
| |
| if (!try_module_get(pi->proto->owner)) |
| goto out_unreg_dev; |
| if (pi->proto->init_proto && pi->proto->init_proto(pi) < 0) |
| goto out_module_put; |
| |
| pi->delay = (delay == -1) ? pi->proto->default_delay : delay; |
| pi->mode = mode; |
| pi->port = parport->base; |
| |
| par_cb.private = pi; |
| pi->pardev = parport_register_dev_model(parport, DRV_NAME, &par_cb, id); |
| if (!pi->pardev) |
| goto out_module_put; |
| |
| if (!pi_probe_unit(pi, unit)) { |
| dev_info(&pi->dev, "Adapter not found\n"); |
| goto out_unreg_parport; |
| } |
| |
| pi->proto->log_adapter(pi); |
| |
| host = ata_host_alloc_pinfo(&pi->pardev->dev, ppi, 1); |
| if (!host) |
| goto out_unreg_parport; |
| dev_set_drvdata(&pi->dev, host); |
| host->private_data = pi; |
| |
| ata_port_desc(host->ports[0], "port %s", pi->pardev->port->name); |
| ata_port_desc(host->ports[0], "protocol %s", pi->proto->name); |
| |
| pi_connect(pi); |
| if (ata_host_activate(host, 0, NULL, 0, &pata_parport_sht)) |
| goto out_disconnect; |
| |
| return pi; |
| |
| out_disconnect: |
| pi_disconnect(pi); |
| out_unreg_parport: |
| parport_unregister_device(pi->pardev); |
| if (pi->proto->release_proto) |
| pi->proto->release_proto(pi); |
| out_module_put: |
| module_put(pi->proto->owner); |
| out_unreg_dev: |
| device_unregister(&pi->dev); |
| /* pata_parport_dev_release will do ida_free(dev->id) and kfree(pi) */ |
| return NULL; |
| } |
| |
| int pata_parport_register_driver(struct pi_protocol *pr) |
| { |
| int error; |
| struct parport *parport; |
| int port_num; |
| |
| pr->driver.bus = &pata_parport_bus_type; |
| pr->driver.name = pr->name; |
| error = driver_register(&pr->driver); |
| if (error) |
| return error; |
| |
| mutex_lock(&pi_mutex); |
| error = idr_alloc(&protocols, pr, 0, 0, GFP_KERNEL); |
| if (error < 0) { |
| driver_unregister(&pr->driver); |
| mutex_unlock(&pi_mutex); |
| return error; |
| } |
| |
| pr_info("pata_parport: protocol %s registered\n", pr->name); |
| |
| if (probe) { |
| /* probe all parports using this protocol */ |
| idr_for_each_entry(&parport_list, parport, port_num) |
| pi_init_one(parport, pr, -1, -1, -1); |
| } |
| mutex_unlock(&pi_mutex); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(pata_parport_register_driver); |
| |
| void pata_parport_unregister_driver(struct pi_protocol *pr) |
| { |
| struct pi_protocol *pr_iter; |
| int id = -1; |
| |
| mutex_lock(&pi_mutex); |
| idr_for_each_entry(&protocols, pr_iter, id) { |
| if (pr_iter == pr) |
| break; |
| } |
| idr_remove(&protocols, id); |
| mutex_unlock(&pi_mutex); |
| driver_unregister(&pr->driver); |
| } |
| EXPORT_SYMBOL_GPL(pata_parport_unregister_driver); |
| |
| static ssize_t new_device_store(const struct bus_type *bus, const char *buf, size_t count) |
| { |
| char port[12] = "auto"; |
| char protocol[8] = "auto"; |
| int mode = -1, unit = -1, delay = -1; |
| struct pi_protocol *pr, *pr_wanted; |
| struct device_driver *drv; |
| struct parport *parport; |
| int port_num, port_wanted, pr_num; |
| bool ok = false; |
| |
| if (sscanf(buf, "%11s %7s %d %d %d", |
| port, protocol, &mode, &unit, &delay) < 1) |
| return -EINVAL; |
| |
| if (sscanf(port, "parport%u", &port_wanted) < 1) { |
| if (strcmp(port, "auto")) { |
| pr_err("invalid port name %s\n", port); |
| return -EINVAL; |
| } |
| port_wanted = -1; |
| } |
| |
| drv = driver_find(protocol, &pata_parport_bus_type); |
| if (!drv) { |
| if (strcmp(protocol, "auto")) { |
| pr_err("protocol %s not found\n", protocol); |
| return -EINVAL; |
| } |
| pr_wanted = NULL; |
| } else { |
| pr_wanted = container_of(drv, struct pi_protocol, driver); |
| } |
| |
| mutex_lock(&pi_mutex); |
| /* walk all parports */ |
| idr_for_each_entry(&parport_list, parport, port_num) { |
| if (port_num == port_wanted || port_wanted == -1) { |
| parport = parport_find_number(port_num); |
| if (!parport) { |
| pr_err("no such port %s\n", port); |
| mutex_unlock(&pi_mutex); |
| return -ENODEV; |
| } |
| /* walk all protocols */ |
| idr_for_each_entry(&protocols, pr, pr_num) { |
| if (pr == pr_wanted || !pr_wanted) |
| if (pi_init_one(parport, pr, mode, unit, |
| delay)) |
| ok = true; |
| } |
| parport_put_port(parport); |
| } |
| } |
| mutex_unlock(&pi_mutex); |
| if (!ok) |
| return -ENODEV; |
| |
| return count; |
| } |
| static BUS_ATTR_WO(new_device); |
| |
| static void pi_remove_one(struct device *dev) |
| { |
| struct ata_host *host = dev_get_drvdata(dev); |
| struct pi_adapter *pi = host->private_data; |
| |
| ata_host_detach(host); |
| pi_disconnect(pi); |
| pi_release(pi); |
| device_unregister(dev); |
| /* pata_parport_dev_release will do ida_free(dev->id) and kfree(pi) */ |
| } |
| |
| static ssize_t delete_device_store(const struct bus_type *bus, const char *buf, size_t count) |
| { |
| struct device *dev; |
| |
| mutex_lock(&pi_mutex); |
| dev = bus_find_device_by_name(bus, NULL, buf); |
| if (!dev) { |
| mutex_unlock(&pi_mutex); |
| return -ENODEV; |
| } |
| |
| pi_remove_one(dev); |
| put_device(dev); |
| mutex_unlock(&pi_mutex); |
| |
| return count; |
| } |
| static BUS_ATTR_WO(delete_device); |
| |
| static void pata_parport_attach(struct parport *port) |
| { |
| struct pi_protocol *pr; |
| int pr_num, id; |
| |
| mutex_lock(&pi_mutex); |
| id = idr_alloc(&parport_list, port, port->number, port->number, |
| GFP_KERNEL); |
| if (id < 0) { |
| mutex_unlock(&pi_mutex); |
| return; |
| } |
| |
| if (probe) { |
| /* probe this port using all protocols */ |
| idr_for_each_entry(&protocols, pr, pr_num) |
| pi_init_one(port, pr, -1, -1, -1); |
| } |
| mutex_unlock(&pi_mutex); |
| } |
| |
| static int pi_remove_port(struct device *dev, void *p) |
| { |
| struct ata_host *host = dev_get_drvdata(dev); |
| struct pi_adapter *pi = host->private_data; |
| |
| if (pi->pardev->port == p) |
| pi_remove_one(dev); |
| |
| return 0; |
| } |
| |
| static void pata_parport_detach(struct parport *port) |
| { |
| mutex_lock(&pi_mutex); |
| bus_for_each_dev(&pata_parport_bus_type, NULL, port, pi_remove_port); |
| idr_remove(&parport_list, port->number); |
| mutex_unlock(&pi_mutex); |
| } |
| |
| static struct parport_driver pata_parport_driver = { |
| .name = DRV_NAME, |
| .match_port = pata_parport_attach, |
| .detach = pata_parport_detach, |
| }; |
| |
| static __init int pata_parport_init(void) |
| { |
| int error; |
| |
| error = bus_register(&pata_parport_bus_type); |
| if (error) { |
| pr_err("failed to register pata_parport bus, error: %d\n", error); |
| return error; |
| } |
| |
| error = device_register(&pata_parport_bus); |
| if (error) { |
| pr_err("failed to register pata_parport bus, error: %d\n", error); |
| goto out_unregister_bus; |
| } |
| |
| error = bus_create_file(&pata_parport_bus_type, &bus_attr_new_device); |
| if (error) { |
| pr_err("unable to create sysfs file, error: %d\n", error); |
| goto out_unregister_dev; |
| } |
| |
| error = bus_create_file(&pata_parport_bus_type, &bus_attr_delete_device); |
| if (error) { |
| pr_err("unable to create sysfs file, error: %d\n", error); |
| goto out_remove_new; |
| } |
| |
| error = parport_register_driver(&pata_parport_driver); |
| if (error) { |
| pr_err("unable to register parport driver, error: %d\n", error); |
| goto out_remove_del; |
| } |
| |
| return 0; |
| |
| out_remove_del: |
| bus_remove_file(&pata_parport_bus_type, &bus_attr_delete_device); |
| out_remove_new: |
| bus_remove_file(&pata_parport_bus_type, &bus_attr_new_device); |
| out_unregister_dev: |
| device_unregister(&pata_parport_bus); |
| out_unregister_bus: |
| bus_unregister(&pata_parport_bus_type); |
| return error; |
| } |
| |
| static __exit void pata_parport_exit(void) |
| { |
| parport_unregister_driver(&pata_parport_driver); |
| bus_remove_file(&pata_parport_bus_type, &bus_attr_new_device); |
| bus_remove_file(&pata_parport_bus_type, &bus_attr_delete_device); |
| device_unregister(&pata_parport_bus); |
| bus_unregister(&pata_parport_bus_type); |
| } |
| |
| MODULE_AUTHOR("Ondrej Zary"); |
| MODULE_DESCRIPTION("driver for parallel port ATA adapters"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("paride"); |
| |
| module_init(pata_parport_init); |
| module_exit(pata_parport_exit); |