| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Zoran zr36057/zr36067 PCI controller driver, for the |
| * Pinnacle/Miro DC10/DC10+/DC30/DC30+, Iomega Buz, Linux |
| * Media Labs LML33/LML33R10. |
| * |
| * This part handles card-specific data and detection |
| * |
| * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| |
| #include <linux/i2c.h> |
| #include <linux/i2c-algo-bit.h> |
| #include <linux/videodev2.h> |
| #include <linux/spinlock.h> |
| |
| #include <linux/pci.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <media/v4l2-common.h> |
| #include <media/i2c/bt819.h> |
| |
| #include "videocodec.h" |
| #include "zoran.h" |
| #include "zoran_card.h" |
| #include "zoran_device.h" |
| #include "zr36016.h" |
| #include "zr36050.h" |
| #include "zr36060.h" |
| |
| extern const struct zoran_format zoran_formats[]; |
| |
| static int card[BUZ_MAX] = { [0 ... (BUZ_MAX - 1)] = -1 }; |
| module_param_array(card, int, NULL, 0444); |
| MODULE_PARM_DESC(card, "Card type"); |
| |
| /* Default input and video norm at startup of the driver. */ |
| |
| static unsigned int default_input; /* default 0 = Composite, 1 = S-Video */ |
| module_param(default_input, uint, 0444); |
| MODULE_PARM_DESC(default_input, |
| "Default input (0=Composite, 1=S-Video, 2=Internal)"); |
| |
| static int default_mux = 1; /* 6 Eyes input selection */ |
| module_param(default_mux, int, 0644); |
| MODULE_PARM_DESC(default_mux, |
| "Default 6 Eyes mux setting (Input selection)"); |
| |
| static int default_norm; /* default 0 = PAL, 1 = NTSC 2 = SECAM */ |
| module_param(default_norm, int, 0444); |
| MODULE_PARM_DESC(default_norm, "Default norm (0=PAL, 1=NTSC, 2=SECAM)"); |
| |
| /* /dev/videoN, -1 for autodetect */ |
| static int video_nr[BUZ_MAX] = { [0 ... (BUZ_MAX - 1)] = -1 }; |
| module_param_array(video_nr, int, NULL, 0444); |
| MODULE_PARM_DESC(video_nr, "Video device number (-1=Auto)"); |
| |
| /* 1=Pass through TV signal when device is not used */ |
| /* 0=Show color bar when device is not used (LML33: only if lml33dpath=1) */ |
| int pass_through; |
| module_param(pass_through, int, 0644); |
| MODULE_PARM_DESC(pass_through, |
| "Pass TV signal through to TV-out when idling"); |
| |
| int zr36067_debug = 1; |
| module_param_named(debug, zr36067_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Debug level (0-5)"); |
| |
| #define ZORAN_VERSION "0.10.1" |
| |
| MODULE_DESCRIPTION("Zoran-36057/36067 JPEG codec driver"); |
| MODULE_AUTHOR("Serguei Miridonov"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(ZORAN_VERSION); |
| |
| #define ZR_DEVICE(subven, subdev, data) { \ |
| .vendor = PCI_VENDOR_ID_ZORAN, .device = PCI_DEVICE_ID_ZORAN_36057, \ |
| .subvendor = (subven), .subdevice = (subdev), .driver_data = (data) } |
| |
| static const struct pci_device_id zr36067_pci_tbl[] = { |
| ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC10PLUS, DC10_PLUS), |
| ZR_DEVICE(PCI_VENDOR_ID_MIRO, PCI_DEVICE_ID_MIRO_DC30PLUS, DC30_PLUS), |
| ZR_DEVICE(PCI_VENDOR_ID_ELECTRONICDESIGNGMBH, PCI_DEVICE_ID_LML_33R10, LML33R10), |
| ZR_DEVICE(PCI_VENDOR_ID_IOMEGA, PCI_DEVICE_ID_IOMEGA_BUZ, BUZ), |
| ZR_DEVICE(PCI_ANY_ID, PCI_ANY_ID, NUM_CARDS), |
| {0} |
| }; |
| MODULE_DEVICE_TABLE(pci, zr36067_pci_tbl); |
| |
| static unsigned int zoran_num; /* number of cards found */ |
| |
| /* videocodec bus functions ZR36060 */ |
| static u32 zr36060_read(struct videocodec *codec, u16 reg) |
| { |
| struct zoran *zr = (struct zoran *)codec->master_data->data; |
| __u32 data; |
| |
| if (post_office_wait(zr) || post_office_write(zr, 0, 1, reg >> 8) || |
| post_office_write(zr, 0, 2, reg & 0xff)) |
| return -1; |
| |
| data = post_office_read(zr, 0, 3) & 0xff; |
| return data; |
| } |
| |
| static void zr36060_write(struct videocodec *codec, u16 reg, u32 val) |
| { |
| struct zoran *zr = (struct zoran *)codec->master_data->data; |
| |
| if (post_office_wait(zr) || post_office_write(zr, 0, 1, reg >> 8) || |
| post_office_write(zr, 0, 2, reg & 0xff)) |
| return; |
| |
| post_office_write(zr, 0, 3, val & 0xff); |
| } |
| |
| /* videocodec bus functions ZR36050 */ |
| static u32 zr36050_read(struct videocodec *codec, u16 reg) |
| { |
| struct zoran *zr = (struct zoran *)codec->master_data->data; |
| __u32 data; |
| |
| if (post_office_wait(zr) || post_office_write(zr, 1, 0, reg >> 2)) // reg. HIGHBYTES |
| return -1; |
| |
| data = post_office_read(zr, 0, reg & 0x03) & 0xff; // reg. LOWBYTES + read |
| return data; |
| } |
| |
| static void zr36050_write(struct videocodec *codec, u16 reg, u32 val) |
| { |
| struct zoran *zr = (struct zoran *)codec->master_data->data; |
| |
| if (post_office_wait(zr) || post_office_write(zr, 1, 0, reg >> 2)) // reg. HIGHBYTES |
| return; |
| |
| post_office_write(zr, 0, reg & 0x03, val & 0xff); // reg. LOWBYTES + wr. data |
| } |
| |
| /* videocodec bus functions ZR36016 */ |
| static u32 zr36016_read(struct videocodec *codec, u16 reg) |
| { |
| struct zoran *zr = (struct zoran *)codec->master_data->data; |
| __u32 data; |
| |
| if (post_office_wait(zr)) |
| return -1; |
| |
| data = post_office_read(zr, 2, reg & 0x03) & 0xff; // read |
| return data; |
| } |
| |
| /* hack for in zoran_device.c */ |
| void zr36016_write(struct videocodec *codec, u16 reg, u32 val) |
| { |
| struct zoran *zr = (struct zoran *)codec->master_data->data; |
| |
| if (post_office_wait(zr)) |
| return; |
| |
| post_office_write(zr, 2, reg & 0x03, val & 0x0ff); // wr. data |
| } |
| |
| /* |
| * Board specific information |
| */ |
| |
| static void dc10_init(struct zoran *zr) |
| { |
| /* Pixel clock selection */ |
| GPIO(zr, 4, 0); |
| GPIO(zr, 5, 1); |
| /* Enable the video bus sync signals */ |
| GPIO(zr, 7, 0); |
| } |
| |
| static void dc10plus_init(struct zoran *zr) |
| { |
| } |
| |
| static void buz_init(struct zoran *zr) |
| { |
| /* some stuff from Iomega */ |
| pci_write_config_dword(zr->pci_dev, 0xfc, 0x90680f15); |
| pci_write_config_dword(zr->pci_dev, 0x0c, 0x00012020); |
| pci_write_config_dword(zr->pci_dev, 0xe8, 0xc0200000); |
| } |
| |
| static void lml33_init(struct zoran *zr) |
| { |
| GPIO(zr, 2, 1); // Set Composite input/output |
| } |
| |
| static void avs6eyes_init(struct zoran *zr) |
| { |
| // AverMedia 6-Eyes original driver by Christer Weinigel |
| |
| // Lifted straight from Christer's old driver and |
| // modified slightly by Martin Samuelsson. |
| |
| int mux = default_mux; /* 1 = BT866, 7 = VID1 */ |
| |
| GPIO(zr, 4, 1); /* Bt866 SLEEP on */ |
| udelay(2); |
| |
| GPIO(zr, 0, 1); /* ZR36060 /RESET on */ |
| GPIO(zr, 1, 0); /* ZR36060 /SLEEP on */ |
| GPIO(zr, 2, mux & 1); /* MUX S0 */ |
| GPIO(zr, 3, 0); /* /FRAME on */ |
| GPIO(zr, 4, 0); /* Bt866 SLEEP off */ |
| GPIO(zr, 5, mux & 2); /* MUX S1 */ |
| GPIO(zr, 6, 0); /* ? */ |
| GPIO(zr, 7, mux & 4); /* MUX S2 */ |
| } |
| |
| static const char *codecid_to_modulename(u16 codecid) |
| { |
| const char *name = NULL; |
| |
| switch (codecid) { |
| case CODEC_TYPE_ZR36060: |
| name = "zr36060"; |
| break; |
| case CODEC_TYPE_ZR36050: |
| name = "zr36050"; |
| break; |
| case CODEC_TYPE_ZR36016: |
| name = "zr36016"; |
| break; |
| } |
| |
| return name; |
| } |
| |
| static int codec_init(struct zoran *zr, u16 codecid) |
| { |
| switch (codecid) { |
| case CODEC_TYPE_ZR36060: |
| #ifdef CONFIG_VIDEO_ZORAN_ZR36060 |
| return zr36060_init_module(); |
| #else |
| pci_err(zr->pci_dev, "ZR36060 support is not enabled\n"); |
| return -EINVAL; |
| #endif |
| break; |
| case CODEC_TYPE_ZR36050: |
| #ifdef CONFIG_VIDEO_ZORAN_DC30 |
| return zr36050_init_module(); |
| #else |
| pci_err(zr->pci_dev, "ZR36050 support is not enabled\n"); |
| return -EINVAL; |
| #endif |
| break; |
| case CODEC_TYPE_ZR36016: |
| #ifdef CONFIG_VIDEO_ZORAN_DC30 |
| return zr36016_init_module(); |
| #else |
| pci_err(zr->pci_dev, "ZR36016 support is not enabled\n"); |
| return -EINVAL; |
| #endif |
| break; |
| } |
| |
| pci_err(zr->pci_dev, "unknown codec id %x\n", codecid); |
| return -EINVAL; |
| } |
| |
| static void codec_exit(struct zoran *zr, u16 codecid) |
| { |
| switch (codecid) { |
| case CODEC_TYPE_ZR36060: |
| #ifdef CONFIG_VIDEO_ZORAN_ZR36060 |
| zr36060_cleanup_module(); |
| #endif |
| break; |
| case CODEC_TYPE_ZR36050: |
| #ifdef CONFIG_VIDEO_ZORAN_DC30 |
| zr36050_cleanup_module(); |
| #endif |
| break; |
| case CODEC_TYPE_ZR36016: |
| #ifdef CONFIG_VIDEO_ZORAN_DC30 |
| zr36016_cleanup_module(); |
| #endif |
| break; |
| } |
| } |
| |
| static int videocodec_init(struct zoran *zr) |
| { |
| const char *codec_name, *vfe_name; |
| int result; |
| |
| codec_name = codecid_to_modulename(zr->card.video_codec); |
| if (codec_name) { |
| result = codec_init(zr, zr->card.video_codec); |
| if (result < 0) { |
| pci_err(zr->pci_dev, "failed to load video codec %s: %d\n", |
| codec_name, result); |
| return result; |
| } |
| } |
| vfe_name = codecid_to_modulename(zr->card.video_vfe); |
| if (vfe_name) { |
| result = codec_init(zr, zr->card.video_vfe); |
| if (result < 0) { |
| pci_err(zr->pci_dev, "failed to load video vfe %s: %d\n", |
| vfe_name, result); |
| if (codec_name) |
| codec_exit(zr, zr->card.video_codec); |
| return result; |
| } |
| } |
| return 0; |
| } |
| |
| static void videocodec_exit(struct zoran *zr) |
| { |
| if (zr->card.video_codec != CODEC_TYPE_NONE) |
| codec_exit(zr, zr->card.video_codec); |
| if (zr->card.video_vfe != CODEC_TYPE_NONE) |
| codec_exit(zr, zr->card.video_vfe); |
| } |
| |
| static const struct tvnorm f50sqpixel = { 944, 768, 83, 880, 625, 576, 16 }; |
| static const struct tvnorm f60sqpixel = { 780, 640, 51, 716, 525, 480, 12 }; |
| static const struct tvnorm f50ccir601 = { 864, 720, 75, 804, 625, 576, 18 }; |
| static const struct tvnorm f60ccir601 = { 858, 720, 57, 788, 525, 480, 16 }; |
| |
| static const struct tvnorm f50ccir601_lml33 = { 864, 720, 75 + 34, 804, 625, 576, 18 }; |
| static const struct tvnorm f60ccir601_lml33 = { 858, 720, 57 + 34, 788, 525, 480, 16 }; |
| |
| /* The DC10 (57/16/50) uses VActive as HSync, so h_start must be 0 */ |
| static const struct tvnorm f50sqpixel_dc10 = { 944, 768, 0, 880, 625, 576, 0 }; |
| static const struct tvnorm f60sqpixel_dc10 = { 780, 640, 0, 716, 525, 480, 12 }; |
| |
| /* |
| * FIXME: I cannot swap U and V in saa7114, so i do one pixel left shift in zoran (75 -> 74) |
| * (Maxim Yevtyushkin <max@linuxmedialabs.com>) |
| */ |
| static const struct tvnorm f50ccir601_lm33r10 = { 864, 720, 74 + 54, 804, 625, 576, 18 }; |
| static const struct tvnorm f60ccir601_lm33r10 = { 858, 720, 56 + 54, 788, 525, 480, 16 }; |
| |
| /* |
| * FIXME: The ks0127 seem incapable of swapping U and V, too, which is why I copy Maxim's left |
| * shift hack for the 6 Eyes. |
| * |
| * Christer's driver used the unshifted norms, though... |
| * /Sam |
| */ |
| static const struct tvnorm f50ccir601_avs6eyes = { 864, 720, 74, 804, 625, 576, 18 }; |
| static const struct tvnorm f60ccir601_avs6eyes = { 858, 720, 56, 788, 525, 480, 16 }; |
| |
| static const unsigned short vpx3220_addrs[] = { 0x43, 0x47, I2C_CLIENT_END }; |
| static const unsigned short saa7110_addrs[] = { 0x4e, 0x4f, I2C_CLIENT_END }; |
| static const unsigned short saa7111_addrs[] = { 0x25, 0x24, I2C_CLIENT_END }; |
| static const unsigned short saa7114_addrs[] = { 0x21, 0x20, I2C_CLIENT_END }; |
| static const unsigned short adv717x_addrs[] = { 0x6a, 0x6b, 0x2a, 0x2b, I2C_CLIENT_END }; |
| static const unsigned short ks0127_addrs[] = { 0x6c, 0x6d, I2C_CLIENT_END }; |
| static const unsigned short saa7185_addrs[] = { 0x44, I2C_CLIENT_END }; |
| static const unsigned short bt819_addrs[] = { 0x45, I2C_CLIENT_END }; |
| static const unsigned short bt856_addrs[] = { 0x44, I2C_CLIENT_END }; |
| static const unsigned short bt866_addrs[] = { 0x44, I2C_CLIENT_END }; |
| |
| static struct card_info zoran_cards[NUM_CARDS] = { |
| { |
| .type = DC10_OLD, |
| .name = "DC10(old)", |
| .i2c_decoder = "vpx3220a", |
| .addrs_decoder = vpx3220_addrs, |
| .video_codec = CODEC_TYPE_ZR36050, |
| .video_vfe = CODEC_TYPE_ZR36016, |
| |
| .inputs = 3, |
| .input = { |
| { 1, "Composite" }, |
| { 2, "S-Video" }, |
| { 0, "Internal/comp" } |
| }, |
| .norms = V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM, |
| .tvn = { |
| &f50sqpixel_dc10, |
| &f60sqpixel_dc10, |
| &f50sqpixel_dc10 |
| }, |
| .jpeg_int = 0, |
| .vsync_int = ZR36057_ISR_GIRQ1, |
| .gpio = { 2, 1, -1, 3, 7, 0, 4, 5 }, |
| .gpio_pol = { 0, 0, 0, 1, 0, 0, 0, 0 }, |
| .gpcs = { -1, 0 }, |
| .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, |
| .gws_not_connected = 0, |
| .input_mux = 0, |
| .init = &dc10_init, |
| }, { |
| .type = DC10_NEW, |
| .name = "DC10(new)", |
| .i2c_decoder = "saa7110", |
| .addrs_decoder = saa7110_addrs, |
| .i2c_encoder = "adv7175", |
| .addrs_encoder = adv717x_addrs, |
| .video_codec = CODEC_TYPE_ZR36060, |
| |
| .inputs = 3, |
| .input = { |
| { 0, "Composite" }, |
| { 7, "S-Video" }, |
| { 5, "Internal/comp" } |
| }, |
| .norms = V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM, |
| .tvn = { |
| &f50sqpixel, |
| &f60sqpixel, |
| &f50sqpixel}, |
| .jpeg_int = ZR36057_ISR_GIRQ0, |
| .vsync_int = ZR36057_ISR_GIRQ1, |
| .gpio = { 3, 0, 6, 1, 2, -1, 4, 5 }, |
| .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, |
| .gpcs = { -1, 1}, |
| .vfe_pol = { 1, 1, 1, 1, 0, 0, 0, 0 }, |
| .gws_not_connected = 0, |
| .input_mux = 0, |
| .init = &dc10plus_init, |
| }, { |
| .type = DC10_PLUS, |
| .name = "DC10_PLUS", |
| .i2c_decoder = "saa7110", |
| .addrs_decoder = saa7110_addrs, |
| .i2c_encoder = "adv7175", |
| .addrs_encoder = adv717x_addrs, |
| .video_codec = CODEC_TYPE_ZR36060, |
| |
| .inputs = 3, |
| .input = { |
| { 0, "Composite" }, |
| { 7, "S-Video" }, |
| { 5, "Internal/comp" } |
| }, |
| .norms = V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM, |
| .tvn = { |
| &f50sqpixel, |
| &f60sqpixel, |
| &f50sqpixel |
| }, |
| .jpeg_int = ZR36057_ISR_GIRQ0, |
| .vsync_int = ZR36057_ISR_GIRQ1, |
| .gpio = { 3, 0, 6, 1, 2, -1, 4, 5 }, |
| .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, |
| .gpcs = { -1, 1 }, |
| .vfe_pol = { 1, 1, 1, 1, 0, 0, 0, 0 }, |
| .gws_not_connected = 0, |
| .input_mux = 0, |
| .init = &dc10plus_init, |
| }, { |
| .type = DC30, |
| .name = "DC30", |
| .i2c_decoder = "vpx3220a", |
| .addrs_decoder = vpx3220_addrs, |
| .i2c_encoder = "adv7175", |
| .addrs_encoder = adv717x_addrs, |
| .video_codec = CODEC_TYPE_ZR36050, |
| .video_vfe = CODEC_TYPE_ZR36016, |
| |
| .inputs = 3, |
| .input = { |
| { 1, "Composite" }, |
| { 2, "S-Video" }, |
| { 0, "Internal/comp" } |
| }, |
| .norms = V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM, |
| .tvn = { |
| &f50sqpixel_dc10, |
| &f60sqpixel_dc10, |
| &f50sqpixel_dc10 |
| }, |
| .jpeg_int = 0, |
| .vsync_int = ZR36057_ISR_GIRQ1, |
| .gpio = { 2, 1, -1, 3, 7, 0, 4, 5 }, |
| .gpio_pol = { 0, 0, 0, 1, 0, 0, 0, 0 }, |
| .gpcs = { -1, 0 }, |
| .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, |
| .gws_not_connected = 0, |
| .input_mux = 0, |
| .init = &dc10_init, |
| }, { |
| .type = DC30_PLUS, |
| .name = "DC30_PLUS", |
| .i2c_decoder = "vpx3220a", |
| .addrs_decoder = vpx3220_addrs, |
| .i2c_encoder = "adv7175", |
| .addrs_encoder = adv717x_addrs, |
| .video_codec = CODEC_TYPE_ZR36050, |
| .video_vfe = CODEC_TYPE_ZR36016, |
| |
| .inputs = 3, |
| .input = { |
| { 1, "Composite" }, |
| { 2, "S-Video" }, |
| { 0, "Internal/comp" } |
| }, |
| .norms = V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM, |
| .tvn = { |
| &f50sqpixel_dc10, |
| &f60sqpixel_dc10, |
| &f50sqpixel_dc10 |
| }, |
| .jpeg_int = 0, |
| .vsync_int = ZR36057_ISR_GIRQ1, |
| .gpio = { 2, 1, -1, 3, 7, 0, 4, 5 }, |
| .gpio_pol = { 0, 0, 0, 1, 0, 0, 0, 0 }, |
| .gpcs = { -1, 0 }, |
| .vfe_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, |
| .gws_not_connected = 0, |
| .input_mux = 0, |
| .init = &dc10_init, |
| }, { |
| .type = LML33, |
| .name = "LML33", |
| .i2c_decoder = "bt819a", |
| .addrs_decoder = bt819_addrs, |
| .i2c_encoder = "bt856", |
| .addrs_encoder = bt856_addrs, |
| .video_codec = CODEC_TYPE_ZR36060, |
| |
| .inputs = 2, |
| .input = { |
| { 0, "Composite" }, |
| { 7, "S-Video" } |
| }, |
| .norms = V4L2_STD_NTSC | V4L2_STD_PAL, |
| .tvn = { |
| &f50ccir601_lml33, |
| &f60ccir601_lml33, |
| NULL |
| }, |
| .jpeg_int = ZR36057_ISR_GIRQ1, |
| .vsync_int = ZR36057_ISR_GIRQ0, |
| .gpio = { 1, -1, 3, 5, 7, -1, -1, -1 }, |
| .gpio_pol = { 0, 0, 0, 0, 1, 0, 0, 0 }, |
| .gpcs = { 3, 1 }, |
| .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, |
| .gws_not_connected = 1, |
| .input_mux = 0, |
| .init = &lml33_init, |
| }, { |
| .type = LML33R10, |
| .name = "LML33R10", |
| .i2c_decoder = "saa7114", |
| .addrs_decoder = saa7114_addrs, |
| .i2c_encoder = "adv7170", |
| .addrs_encoder = adv717x_addrs, |
| .video_codec = CODEC_TYPE_ZR36060, |
| |
| .inputs = 2, |
| .input = { |
| { 0, "Composite" }, |
| { 7, "S-Video" } |
| }, |
| .norms = V4L2_STD_NTSC | V4L2_STD_PAL, |
| .tvn = { |
| &f50ccir601_lm33r10, |
| &f60ccir601_lm33r10, |
| NULL |
| }, |
| .jpeg_int = ZR36057_ISR_GIRQ1, |
| .vsync_int = ZR36057_ISR_GIRQ0, |
| .gpio = { 1, -1, 3, 5, 7, -1, -1, -1 }, |
| .gpio_pol = { 0, 0, 0, 0, 1, 0, 0, 0 }, |
| .gpcs = { 3, 1 }, |
| .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, |
| .gws_not_connected = 1, |
| .input_mux = 0, |
| .init = &lml33_init, |
| }, { |
| .type = BUZ, |
| .name = "Buz", |
| .i2c_decoder = "saa7111", |
| .addrs_decoder = saa7111_addrs, |
| .i2c_encoder = "saa7185", |
| .addrs_encoder = saa7185_addrs, |
| .video_codec = CODEC_TYPE_ZR36060, |
| |
| .inputs = 2, |
| .input = { |
| { 3, "Composite" }, |
| { 7, "S-Video" } |
| }, |
| .norms = V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM, |
| .tvn = { |
| &f50ccir601, |
| &f60ccir601, |
| &f50ccir601 |
| }, |
| .jpeg_int = ZR36057_ISR_GIRQ1, |
| .vsync_int = ZR36057_ISR_GIRQ0, |
| .gpio = { 1, -1, 3, -1, -1, -1, -1, -1 }, |
| .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, |
| .gpcs = { 3, 1 }, |
| .vfe_pol = { 1, 1, 0, 0, 0, 1, 0, 0 }, |
| .gws_not_connected = 1, |
| .input_mux = 0, |
| .init = &buz_init, |
| }, { |
| .type = AVS6EYES, |
| .name = "6-Eyes", |
| /* |
| * AverMedia chose not to brand the 6-Eyes. Thus it can't be |
| * autodetected, and requires card=x. |
| */ |
| .i2c_decoder = "ks0127", |
| .addrs_decoder = ks0127_addrs, |
| .i2c_encoder = "bt866", |
| .addrs_encoder = bt866_addrs, |
| .video_codec = CODEC_TYPE_ZR36060, |
| |
| .inputs = 10, |
| .input = { |
| { 0, "Composite 1" }, |
| { 1, "Composite 2" }, |
| { 2, "Composite 3" }, |
| { 4, "Composite 4" }, |
| { 5, "Composite 5" }, |
| { 6, "Composite 6" }, |
| { 8, "S-Video 1" }, |
| { 9, "S-Video 2" }, |
| {10, "S-Video 3" }, |
| {15, "YCbCr" } |
| }, |
| .norms = V4L2_STD_NTSC | V4L2_STD_PAL, |
| .tvn = { |
| &f50ccir601_avs6eyes, |
| &f60ccir601_avs6eyes, |
| NULL |
| }, |
| .jpeg_int = ZR36057_ISR_GIRQ1, |
| .vsync_int = ZR36057_ISR_GIRQ0, |
| .gpio = { 1, 0, 3, -1, -1, -1, -1, -1 },// Validity unknown /Sam |
| .gpio_pol = { 0, 0, 0, 0, 0, 0, 0, 0 }, // Validity unknown /Sam |
| .gpcs = { 3, 1 }, // Validity unknown /Sam |
| .vfe_pol = { 1, 0, 0, 0, 0, 1, 0, 0 }, // Validity unknown /Sam |
| .gws_not_connected = 1, |
| .input_mux = 1, |
| .init = &avs6eyes_init, |
| } |
| |
| }; |
| |
| /* |
| * I2C functions |
| */ |
| /* software I2C functions */ |
| static int zoran_i2c_getsda(void *data) |
| { |
| struct zoran *zr = (struct zoran *)data; |
| |
| return (btread(ZR36057_I2CBR) >> 1) & 1; |
| } |
| |
| static int zoran_i2c_getscl(void *data) |
| { |
| struct zoran *zr = (struct zoran *)data; |
| |
| return btread(ZR36057_I2CBR) & 1; |
| } |
| |
| static void zoran_i2c_setsda(void *data, int state) |
| { |
| struct zoran *zr = (struct zoran *)data; |
| |
| if (state) |
| zr->i2cbr |= 2; |
| else |
| zr->i2cbr &= ~2; |
| btwrite(zr->i2cbr, ZR36057_I2CBR); |
| } |
| |
| static void zoran_i2c_setscl(void *data, int state) |
| { |
| struct zoran *zr = (struct zoran *)data; |
| |
| if (state) |
| zr->i2cbr |= 1; |
| else |
| zr->i2cbr &= ~1; |
| btwrite(zr->i2cbr, ZR36057_I2CBR); |
| } |
| |
| static const struct i2c_algo_bit_data zoran_i2c_bit_data_template = { |
| .setsda = zoran_i2c_setsda, |
| .setscl = zoran_i2c_setscl, |
| .getsda = zoran_i2c_getsda, |
| .getscl = zoran_i2c_getscl, |
| .udelay = 10, |
| .timeout = 100, |
| }; |
| |
| static int zoran_register_i2c(struct zoran *zr) |
| { |
| zr->i2c_algo = zoran_i2c_bit_data_template; |
| zr->i2c_algo.data = zr; |
| strscpy(zr->i2c_adapter.name, ZR_DEVNAME(zr), |
| sizeof(zr->i2c_adapter.name)); |
| i2c_set_adapdata(&zr->i2c_adapter, &zr->v4l2_dev); |
| zr->i2c_adapter.algo_data = &zr->i2c_algo; |
| zr->i2c_adapter.dev.parent = &zr->pci_dev->dev; |
| return i2c_bit_add_bus(&zr->i2c_adapter); |
| } |
| |
| static void zoran_unregister_i2c(struct zoran *zr) |
| { |
| i2c_del_adapter(&zr->i2c_adapter); |
| } |
| |
| /* Check a zoran_params struct for correctness, insert default params */ |
| int zoran_check_jpg_settings(struct zoran *zr, |
| struct zoran_jpg_settings *settings, int try) |
| { |
| int err = 0, err0 = 0; |
| |
| pci_dbg(zr->pci_dev, "%s - dec: %d, Hdcm: %d, Vdcm: %d, Tdcm: %d\n", |
| __func__, settings->decimation, settings->hor_dcm, |
| settings->ver_dcm, settings->tmp_dcm); |
| pci_dbg(zr->pci_dev, "%s - x: %d, y: %d, w: %d, y: %d\n", __func__, |
| settings->img_x, settings->img_y, |
| settings->img_width, settings->img_height); |
| /* Check decimation, set default values for decimation = 1, 2, 4 */ |
| switch (settings->decimation) { |
| case 1: |
| |
| settings->hor_dcm = 1; |
| settings->ver_dcm = 1; |
| settings->tmp_dcm = 1; |
| settings->field_per_buff = 2; |
| settings->img_x = 0; |
| settings->img_y = 0; |
| settings->img_width = BUZ_MAX_WIDTH; |
| settings->img_height = BUZ_MAX_HEIGHT / 2; |
| break; |
| case 2: |
| |
| settings->hor_dcm = 2; |
| settings->ver_dcm = 1; |
| settings->tmp_dcm = 2; |
| settings->field_per_buff = 1; |
| settings->img_x = (BUZ_MAX_WIDTH == 720) ? 8 : 0; |
| settings->img_y = 0; |
| settings->img_width = |
| (BUZ_MAX_WIDTH == 720) ? 704 : BUZ_MAX_WIDTH; |
| settings->img_height = BUZ_MAX_HEIGHT / 2; |
| break; |
| case 4: |
| |
| if (zr->card.type == DC10_NEW) { |
| pci_dbg(zr->pci_dev, |
| "%s - HDec by 4 is not supported on the DC10\n", |
| __func__); |
| err0++; |
| break; |
| } |
| |
| settings->hor_dcm = 4; |
| settings->ver_dcm = 2; |
| settings->tmp_dcm = 2; |
| settings->field_per_buff = 1; |
| settings->img_x = (BUZ_MAX_WIDTH == 720) ? 8 : 0; |
| settings->img_y = 0; |
| settings->img_width = |
| (BUZ_MAX_WIDTH == 720) ? 704 : BUZ_MAX_WIDTH; |
| settings->img_height = BUZ_MAX_HEIGHT / 2; |
| break; |
| case 0: |
| |
| /* We have to check the data the user has set */ |
| |
| if (settings->hor_dcm != 1 && settings->hor_dcm != 2 && |
| (zr->card.type == DC10_NEW || settings->hor_dcm != 4)) { |
| settings->hor_dcm = clamp(settings->hor_dcm, 1, 2); |
| err0++; |
| } |
| if (settings->ver_dcm != 1 && settings->ver_dcm != 2) { |
| settings->ver_dcm = clamp(settings->ver_dcm, 1, 2); |
| err0++; |
| } |
| if (settings->tmp_dcm != 1 && settings->tmp_dcm != 2) { |
| settings->tmp_dcm = clamp(settings->tmp_dcm, 1, 2); |
| err0++; |
| } |
| if (settings->field_per_buff != 1 && |
| settings->field_per_buff != 2) { |
| settings->field_per_buff = clamp(settings->field_per_buff, 1, 2); |
| err0++; |
| } |
| if (settings->img_x < 0) { |
| settings->img_x = 0; |
| err0++; |
| } |
| if (settings->img_y < 0) { |
| settings->img_y = 0; |
| err0++; |
| } |
| if (settings->img_width < 0 || settings->img_width > BUZ_MAX_WIDTH) { |
| settings->img_width = clamp(settings->img_width, 0, (int)BUZ_MAX_WIDTH); |
| err0++; |
| } |
| if (settings->img_height < 0 || settings->img_height > BUZ_MAX_HEIGHT / 2) { |
| settings->img_height = clamp(settings->img_height, 0, BUZ_MAX_HEIGHT / 2); |
| err0++; |
| } |
| if (settings->img_x + settings->img_width > BUZ_MAX_WIDTH) { |
| settings->img_x = BUZ_MAX_WIDTH - settings->img_width; |
| err0++; |
| } |
| if (settings->img_y + settings->img_height > BUZ_MAX_HEIGHT / 2) { |
| settings->img_y = BUZ_MAX_HEIGHT / 2 - settings->img_height; |
| err0++; |
| } |
| if (settings->img_width % (16 * settings->hor_dcm) != 0) { |
| settings->img_width -= settings->img_width % (16 * settings->hor_dcm); |
| if (settings->img_width == 0) |
| settings->img_width = 16 * settings->hor_dcm; |
| err0++; |
| } |
| if (settings->img_height % (8 * settings->ver_dcm) != 0) { |
| settings->img_height -= settings->img_height % (8 * settings->ver_dcm); |
| if (settings->img_height == 0) |
| settings->img_height = 8 * settings->ver_dcm; |
| err0++; |
| } |
| |
| if (!try && err0) { |
| pci_err(zr->pci_dev, "%s - error in params for decimation = 0\n", __func__); |
| err++; |
| } |
| break; |
| default: |
| pci_err(zr->pci_dev, "%s - decimation = %d, must be 0, 1, 2 or 4\n", |
| __func__, settings->decimation); |
| err++; |
| break; |
| } |
| |
| if (settings->jpg_comp.quality > 100) |
| settings->jpg_comp.quality = 100; |
| if (settings->jpg_comp.quality < 5) |
| settings->jpg_comp.quality = 5; |
| if (settings->jpg_comp.APPn < 0) |
| settings->jpg_comp.APPn = 0; |
| if (settings->jpg_comp.APPn > 15) |
| settings->jpg_comp.APPn = 15; |
| if (settings->jpg_comp.APP_len < 0) |
| settings->jpg_comp.APP_len = 0; |
| if (settings->jpg_comp.APP_len > 60) |
| settings->jpg_comp.APP_len = 60; |
| if (settings->jpg_comp.COM_len < 0) |
| settings->jpg_comp.COM_len = 0; |
| if (settings->jpg_comp.COM_len > 60) |
| settings->jpg_comp.COM_len = 60; |
| if (err) |
| return -EINVAL; |
| return 0; |
| } |
| |
| static int zoran_init_video_device(struct zoran *zr, struct video_device *video_dev, int dir) |
| { |
| int err; |
| |
| /* Now add the template and register the device unit. */ |
| *video_dev = zoran_template; |
| video_dev->v4l2_dev = &zr->v4l2_dev; |
| video_dev->lock = &zr->lock; |
| video_dev->device_caps = V4L2_CAP_STREAMING | dir; |
| |
| strscpy(video_dev->name, ZR_DEVNAME(zr), sizeof(video_dev->name)); |
| video_dev->vfl_dir = VFL_DIR_RX; |
| zoran_queue_init(zr, &zr->vq, V4L2_BUF_TYPE_VIDEO_CAPTURE); |
| |
| err = video_register_device(video_dev, VFL_TYPE_VIDEO, video_nr[zr->id]); |
| if (err < 0) |
| return err; |
| video_set_drvdata(video_dev, zr); |
| return 0; |
| } |
| |
| static void zoran_exit_video_devices(struct zoran *zr) |
| { |
| video_unregister_device(zr->video_dev); |
| kfree(zr->video_dev); |
| } |
| |
| static int zoran_init_video_devices(struct zoran *zr) |
| { |
| int err; |
| |
| zr->video_dev = video_device_alloc(); |
| if (!zr->video_dev) |
| return -ENOMEM; |
| |
| err = zoran_init_video_device(zr, zr->video_dev, V4L2_CAP_VIDEO_CAPTURE); |
| if (err) |
| kfree(zr->video_dev); |
| return err; |
| } |
| |
| /* |
| * v4l2_device_unregister() will care about removing zr->encoder/zr->decoder |
| * via v4l2_i2c_subdev_unregister() |
| */ |
| static int zoran_i2c_init(struct zoran *zr) |
| { |
| int err; |
| |
| pci_info(zr->pci_dev, "Initializing i2c bus...\n"); |
| |
| err = zoran_register_i2c(zr); |
| if (err) { |
| pci_err(zr->pci_dev, "%s - cannot initialize i2c bus\n", __func__); |
| return err; |
| } |
| |
| zr->decoder = v4l2_i2c_new_subdev(&zr->v4l2_dev, &zr->i2c_adapter, |
| zr->card.i2c_decoder, 0, |
| zr->card.addrs_decoder); |
| if (!zr->decoder) { |
| pci_err(zr->pci_dev, "Fail to get decoder %s\n", zr->card.i2c_decoder); |
| err = -EINVAL; |
| goto error_decoder; |
| } |
| |
| if (zr->card.i2c_encoder) { |
| zr->encoder = v4l2_i2c_new_subdev(&zr->v4l2_dev, &zr->i2c_adapter, |
| zr->card.i2c_encoder, 0, |
| zr->card.addrs_encoder); |
| if (!zr->encoder) { |
| pci_err(zr->pci_dev, "Fail to get encoder %s\n", zr->card.i2c_encoder); |
| err = -EINVAL; |
| goto error_decoder; |
| } |
| } |
| return 0; |
| |
| error_decoder: |
| zoran_unregister_i2c(zr); |
| return err; |
| } |
| |
| static void zoran_i2c_exit(struct zoran *zr) |
| { |
| zoran_unregister_i2c(zr); |
| } |
| |
| void zoran_open_init_params(struct zoran *zr) |
| { |
| int i; |
| |
| zr->v4l_settings.width = 192; |
| zr->v4l_settings.height = 144; |
| zr->v4l_settings.format = &zoran_formats[7]; /* YUY2 - YUV-4:2:2 packed */ |
| zr->v4l_settings.bytesperline = zr->v4l_settings.width * |
| ((zr->v4l_settings.format->depth + 7) / 8); |
| |
| /* Set necessary params and call zoran_check_jpg_settings to set the defaults */ |
| zr->jpg_settings.decimation = 1; |
| zr->jpg_settings.jpg_comp.quality = 50; /* default compression factor 8 */ |
| if (zr->card.type != BUZ) |
| zr->jpg_settings.odd_even = 1; |
| else |
| zr->jpg_settings.odd_even = 0; |
| zr->jpg_settings.jpg_comp.APPn = 0; |
| zr->jpg_settings.jpg_comp.APP_len = 0; /* No APPn marker */ |
| memset(zr->jpg_settings.jpg_comp.APP_data, 0, |
| sizeof(zr->jpg_settings.jpg_comp.APP_data)); |
| zr->jpg_settings.jpg_comp.COM_len = 0; /* No COM marker */ |
| memset(zr->jpg_settings.jpg_comp.COM_data, 0, |
| sizeof(zr->jpg_settings.jpg_comp.COM_data)); |
| zr->jpg_settings.jpg_comp.jpeg_markers = |
| V4L2_JPEG_MARKER_DHT | V4L2_JPEG_MARKER_DQT; |
| i = zoran_check_jpg_settings(zr, &zr->jpg_settings, 0); |
| if (i) |
| pci_err(zr->pci_dev, "%s internal error\n", __func__); |
| |
| zr->buffer_size = zr->v4l_settings.bytesperline * zr->v4l_settings.height; |
| |
| clear_interrupt_counters(zr); |
| } |
| |
| static int zr36057_init(struct zoran *zr) |
| { |
| int j, err; |
| |
| pci_info(zr->pci_dev, "initializing card[%d]\n", zr->id); |
| |
| /* Avoid nonsense settings from user for default input/norm */ |
| if (default_norm < 0 || default_norm > 2) |
| default_norm = 0; |
| if (default_norm == 0) { |
| zr->norm = V4L2_STD_PAL; |
| zr->timing = zr->card.tvn[ZR_NORM_PAL]; |
| } else if (default_norm == 1) { |
| zr->norm = V4L2_STD_NTSC; |
| zr->timing = zr->card.tvn[ZR_NORM_NTSC]; |
| } else { |
| zr->norm = V4L2_STD_SECAM; |
| zr->timing = zr->card.tvn[ZR_NORM_SECAM]; |
| } |
| if (!zr->timing) { |
| pci_warn(zr->pci_dev, |
| "%s - default TV standard not supported by hardware. PAL will be used.\n", |
| __func__); |
| zr->norm = V4L2_STD_PAL; |
| zr->timing = zr->card.tvn[ZR_NORM_PAL]; |
| } |
| |
| if (default_input > zr->card.inputs - 1) { |
| pci_warn(zr->pci_dev, "default_input value %d out of range (0-%d)\n", |
| default_input, zr->card.inputs - 1); |
| default_input = 0; |
| } |
| zr->input = default_input; |
| |
| /* default setup (will be repeated at every open) */ |
| zoran_open_init_params(zr); |
| |
| /* allocate memory *before* doing anything to the hardware in case allocation fails */ |
| zr->stat_com = dma_alloc_coherent(&zr->pci_dev->dev, |
| BUZ_NUM_STAT_COM * sizeof(u32), |
| &zr->p_sc, GFP_KERNEL); |
| if (!zr->stat_com) |
| return -ENOMEM; |
| |
| for (j = 0; j < BUZ_NUM_STAT_COM; j++) |
| zr->stat_com[j] = cpu_to_le32(1); /* mark as unavailable to zr36057 */ |
| |
| zr->stat_comb = dma_alloc_coherent(&zr->pci_dev->dev, |
| BUZ_NUM_STAT_COM * sizeof(u32) * 2, |
| &zr->p_scb, GFP_KERNEL); |
| if (!zr->stat_comb) { |
| err = -ENOMEM; |
| goto exit_statcom; |
| } |
| |
| err = zoran_init_video_devices(zr); |
| if (err) |
| goto exit_statcomb; |
| |
| zoran_init_hardware(zr); |
| if (!pass_through) { |
| decoder_call(zr, video, s_stream, 0); |
| encoder_call(zr, video, s_routing, 2, 0, 0); |
| } |
| |
| zr->initialized = 1; |
| return 0; |
| |
| exit_statcomb: |
| dma_free_coherent(&zr->pci_dev->dev, BUZ_NUM_STAT_COM * sizeof(u32) * 2, |
| zr->stat_comb, zr->p_scb); |
| exit_statcom: |
| dma_free_coherent(&zr->pci_dev->dev, BUZ_NUM_STAT_COM * sizeof(u32), |
| zr->stat_com, zr->p_sc); |
| return err; |
| } |
| |
| static void zoran_remove(struct pci_dev *pdev) |
| { |
| struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); |
| struct zoran *zr = to_zoran(v4l2_dev); |
| |
| if (!zr->initialized) |
| goto exit_free; |
| |
| debugfs_remove_recursive(zr->dbgfs_dir); |
| |
| zoran_queue_exit(zr); |
| |
| /* unregister videocodec bus */ |
| if (zr->codec) |
| videocodec_detach(zr->codec); |
| if (zr->vfe) |
| videocodec_detach(zr->vfe); |
| videocodec_exit(zr); |
| |
| /* unregister i2c bus */ |
| zoran_i2c_exit(zr); |
| /* disable PCI bus-mastering */ |
| zoran_set_pci_master(zr, 0); |
| /* put chip into reset */ |
| btwrite(0, ZR36057_SPGPPCR); |
| pci_free_irq(zr->pci_dev, 0, zr); |
| /* unmap and free memory */ |
| dma_free_coherent(&zr->pci_dev->dev, BUZ_NUM_STAT_COM * sizeof(u32), |
| zr->stat_com, zr->p_sc); |
| dma_free_coherent(&zr->pci_dev->dev, BUZ_NUM_STAT_COM * sizeof(u32) * 2, |
| zr->stat_comb, zr->p_scb); |
| pci_release_regions(pdev); |
| pci_disable_device(zr->pci_dev); |
| zoran_exit_video_devices(zr); |
| exit_free: |
| v4l2_ctrl_handler_free(&zr->hdl); |
| v4l2_device_unregister(&zr->v4l2_dev); |
| } |
| |
| void zoran_vdev_release(struct video_device *vdev) |
| { |
| kfree(vdev); |
| } |
| |
| static struct videocodec_master *zoran_setup_videocodec(struct zoran *zr, |
| int type) |
| { |
| struct videocodec_master *m = NULL; |
| |
| m = devm_kmalloc(&zr->pci_dev->dev, sizeof(*m), GFP_KERNEL); |
| if (!m) |
| return m; |
| |
| /* |
| * magic and type are unused for master struct. Makes sense only at codec structs. |
| * In the past, .type were initialized to the old V4L1 .hardware value, |
| * as VID_HARDWARE_ZR36067 |
| */ |
| m->magic = 0L; |
| m->type = 0; |
| |
| m->flags = CODEC_FLAG_ENCODER | CODEC_FLAG_DECODER; |
| strscpy(m->name, ZR_DEVNAME(zr), sizeof(m->name)); |
| m->data = zr; |
| |
| switch (type) { |
| case CODEC_TYPE_ZR36060: |
| m->readreg = zr36060_read; |
| m->writereg = zr36060_write; |
| m->flags |= CODEC_FLAG_JPEG | CODEC_FLAG_VFE; |
| break; |
| case CODEC_TYPE_ZR36050: |
| m->readreg = zr36050_read; |
| m->writereg = zr36050_write; |
| m->flags |= CODEC_FLAG_JPEG; |
| break; |
| case CODEC_TYPE_ZR36016: |
| m->readreg = zr36016_read; |
| m->writereg = zr36016_write; |
| m->flags |= CODEC_FLAG_VFE; |
| break; |
| } |
| |
| return m; |
| } |
| |
| static void zoran_subdev_notify(struct v4l2_subdev *sd, unsigned int cmd, void *arg) |
| { |
| struct zoran *zr = to_zoran(sd->v4l2_dev); |
| |
| /* |
| * Bt819 needs to reset its FIFO buffer using #FRST pin and |
| * LML33 card uses GPIO(7) for that. |
| */ |
| if (cmd == BT819_FIFO_RESET_LOW) |
| GPIO(zr, 7, 0); |
| else if (cmd == BT819_FIFO_RESET_HIGH) |
| GPIO(zr, 7, 1); |
| } |
| |
| static int zoran_video_set_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct zoran *zr = container_of(ctrl->handler, struct zoran, hdl); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_JPEG_COMPRESSION_QUALITY: |
| zr->jpg_settings.jpg_comp.quality = ctrl->val; |
| return zoran_check_jpg_settings(zr, &zr->jpg_settings, 0); |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static const struct v4l2_ctrl_ops zoran_video_ctrl_ops = { |
| .s_ctrl = zoran_video_set_ctrl, |
| }; |
| |
| static int zoran_debugfs_show(struct seq_file *seq, void *v) |
| { |
| struct zoran *zr = seq->private; |
| |
| seq_printf(seq, "Running mode %x\n", zr->running); |
| seq_printf(seq, "Codec mode %x\n", zr->codec_mode); |
| seq_printf(seq, "Norm %llx\n", zr->norm); |
| seq_printf(seq, "Input %d\n", zr->input); |
| seq_printf(seq, "Buffersize %d\n", zr->buffer_size); |
| |
| seq_printf(seq, "V4L width %dx%d\n", zr->v4l_settings.width, zr->v4l_settings.height); |
| seq_printf(seq, "V4L bytesperline %d\n", zr->v4l_settings.bytesperline); |
| |
| seq_printf(seq, "JPG decimation %u\n", zr->jpg_settings.decimation); |
| seq_printf(seq, "JPG hor_dcm %u\n", zr->jpg_settings.hor_dcm); |
| seq_printf(seq, "JPG ver_dcm %u\n", zr->jpg_settings.ver_dcm); |
| seq_printf(seq, "JPG tmp_dcm %u\n", zr->jpg_settings.tmp_dcm); |
| seq_printf(seq, "JPG odd_even %u\n", zr->jpg_settings.odd_even); |
| seq_printf(seq, "JPG crop %dx%d %d %d\n", |
| zr->jpg_settings.img_x, |
| zr->jpg_settings.img_y, |
| zr->jpg_settings.img_width, |
| zr->jpg_settings.img_height); |
| |
| seq_printf(seq, "Prepared %u\n", zr->prepared); |
| seq_printf(seq, "Queued %u\n", zr->queued); |
| |
| videocodec_debugfs_show(seq); |
| return 0; |
| } |
| |
| DEFINE_SHOW_ATTRIBUTE(zoran_debugfs); |
| |
| /* |
| * Scan for a Buz card (actually for the PCI controller ZR36057), |
| * request the irq and map the io memory |
| */ |
| static int zoran_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| unsigned char latency, need_latency; |
| struct zoran *zr; |
| int result; |
| struct videocodec_master *master_vfe = NULL; |
| struct videocodec_master *master_codec = NULL; |
| int card_num; |
| unsigned int nr; |
| int err; |
| |
| pci_info(pdev, "Zoran MJPEG board driver version %s\n", ZORAN_VERSION); |
| |
| /* some mainboards might not do PCI-PCI data transfer well */ |
| if (pci_pci_problems & (PCIPCI_FAIL | PCIAGP_FAIL | PCIPCI_ALIMAGIK)) |
| pci_warn(pdev, "%s: chipset does not support reliable PCI-PCI DMA\n", |
| ZORAN_NAME); |
| |
| err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); |
| if (err) |
| return err; |
| err = vb2_dma_contig_set_max_seg_size(&pdev->dev, U32_MAX); |
| if (err) |
| return err; |
| |
| nr = zoran_num++; |
| if (nr >= BUZ_MAX) { |
| pci_err(pdev, "driver limited to %d card(s) maximum\n", BUZ_MAX); |
| return -ENOENT; |
| } |
| |
| zr = devm_kzalloc(&pdev->dev, sizeof(*zr), GFP_KERNEL); |
| if (!zr) |
| return -ENOMEM; |
| |
| zr->v4l2_dev.notify = zoran_subdev_notify; |
| if (v4l2_device_register(&pdev->dev, &zr->v4l2_dev)) |
| goto zr_free_mem; |
| zr->pci_dev = pdev; |
| zr->id = nr; |
| snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id); |
| if (v4l2_ctrl_handler_init(&zr->hdl, 10)) |
| goto zr_unreg; |
| zr->v4l2_dev.ctrl_handler = &zr->hdl; |
| v4l2_ctrl_new_std(&zr->hdl, &zoran_video_ctrl_ops, |
| V4L2_CID_JPEG_COMPRESSION_QUALITY, 0, |
| 100, 1, 50); |
| spin_lock_init(&zr->spinlock); |
| mutex_init(&zr->lock); |
| if (pci_enable_device(pdev)) |
| goto zr_unreg; |
| zr->revision = zr->pci_dev->revision; |
| |
| pci_info(zr->pci_dev, "Zoran ZR360%c7 (rev %d), irq: %d, memory: 0x%08llx\n", |
| zr->revision < 2 ? '5' : '6', zr->revision, |
| zr->pci_dev->irq, (uint64_t)pci_resource_start(zr->pci_dev, 0)); |
| if (zr->revision >= 2) |
| pci_info(zr->pci_dev, "Subsystem vendor=0x%04x id=0x%04x\n", |
| zr->pci_dev->subsystem_vendor, zr->pci_dev->subsystem_device); |
| |
| /* Use auto-detected card type? */ |
| if (card[nr] == -1) { |
| if (zr->revision < 2) { |
| pci_err(pdev, "No card type specified, please use the card=X module parameter\n"); |
| pci_err(pdev, "It is not possible to auto-detect ZR36057 based cards\n"); |
| goto zr_unreg; |
| } |
| |
| card_num = ent->driver_data; |
| if (card_num >= NUM_CARDS) { |
| pci_err(pdev, "Unknown card, try specifying card=X module parameter\n"); |
| goto zr_unreg; |
| } |
| pci_info(zr->pci_dev, "%s() - card %s detected\n", __func__, |
| zoran_cards[card_num].name); |
| } else { |
| card_num = card[nr]; |
| if (card_num >= NUM_CARDS || card_num < 0) { |
| pci_err(pdev, "User specified card type %d out of range (0 .. %d)\n", |
| card_num, NUM_CARDS - 1); |
| goto zr_unreg; |
| } |
| } |
| |
| /* |
| * even though we make this a non pointer and thus |
| * theoretically allow for making changes to this struct |
| * on a per-individual card basis at runtime, this is |
| * strongly discouraged. This structure is intended to |
| * keep general card information, no settings or anything |
| */ |
| zr->card = zoran_cards[card_num]; |
| snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "%s[%u]", |
| zr->card.name, zr->id); |
| |
| err = pci_request_regions(pdev, ZR_DEVNAME(zr)); |
| if (err) |
| goto zr_unreg; |
| |
| zr->zr36057_mem = devm_ioremap(&pdev->dev, pci_resource_start(pdev, 0), |
| pci_resource_len(pdev, 0)); |
| if (!zr->zr36057_mem) { |
| pci_err(pdev, "%s() - ioremap failed\n", __func__); |
| goto zr_pci_release; |
| } |
| |
| result = pci_request_irq(pdev, 0, zoran_irq, NULL, zr, ZR_DEVNAME(zr)); |
| if (result < 0) { |
| if (result == -EINVAL) { |
| pci_err(pdev, "%s - bad IRQ number or handler\n", __func__); |
| } else if (result == -EBUSY) { |
| pci_err(pdev, "%s - IRQ %d busy, change your PnP config in BIOS\n", |
| __func__, zr->pci_dev->irq); |
| } else { |
| pci_err(pdev, "%s - cannot assign IRQ, error code %d\n", __func__, result); |
| } |
| goto zr_pci_release; |
| } |
| |
| /* set PCI latency timer */ |
| pci_read_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, |
| &latency); |
| need_latency = zr->revision > 1 ? 32 : 48; |
| if (latency != need_latency) { |
| pci_info(zr->pci_dev, "Changing PCI latency from %d to %d\n", |
| latency, need_latency); |
| pci_write_config_byte(zr->pci_dev, PCI_LATENCY_TIMER, need_latency); |
| } |
| |
| zr36057_restart(zr); |
| |
| err = zoran_i2c_init(zr); |
| if (err) |
| goto zr_free_irq; |
| |
| pci_info(zr->pci_dev, "Initializing videocodec bus...\n"); |
| err = videocodec_init(zr); |
| if (err) |
| goto zr_unreg_i2c; |
| |
| /* reset JPEG codec */ |
| jpeg_codec_sleep(zr, 1); |
| jpeg_codec_reset(zr); |
| /* video bus enabled */ |
| /* display codec revision */ |
| if (zr->card.video_codec != 0) { |
| master_codec = zoran_setup_videocodec(zr, zr->card.video_codec); |
| if (!master_codec) |
| goto zr_unreg_videocodec; |
| zr->codec = videocodec_attach(master_codec); |
| if (!zr->codec) { |
| pci_err(pdev, "%s - no codec found\n", __func__); |
| goto zr_unreg_videocodec; |
| } |
| if (zr->codec->type != zr->card.video_codec) { |
| pci_err(pdev, "%s - wrong codec\n", __func__); |
| goto zr_unreg_videocodec; |
| } |
| } |
| if (zr->card.video_vfe != 0) { |
| master_vfe = zoran_setup_videocodec(zr, zr->card.video_vfe); |
| if (!master_vfe) |
| goto zr_detach_codec; |
| zr->vfe = videocodec_attach(master_vfe); |
| if (!zr->vfe) { |
| pci_err(pdev, "%s - no VFE found\n", __func__); |
| goto zr_detach_codec; |
| } |
| if (zr->vfe->type != zr->card.video_vfe) { |
| pci_err(pdev, "%s = wrong VFE\n", __func__); |
| goto zr_detach_vfe; |
| } |
| } |
| |
| /* take care of Natoma chipset and a revision 1 zr36057 */ |
| if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) |
| pci_info(zr->pci_dev, "ZR36057/Natoma bug, max. buffer size is 128K\n"); |
| |
| if (zr36057_init(zr) < 0) |
| goto zr_detach_vfe; |
| |
| zr->map_mode = ZORAN_MAP_MODE_RAW; |
| |
| zr->dbgfs_dir = debugfs_create_dir(ZR_DEVNAME(zr), NULL); |
| debugfs_create_file("debug", 0444, zr->dbgfs_dir, zr, |
| &zoran_debugfs_fops); |
| return 0; |
| |
| zr_detach_vfe: |
| videocodec_detach(zr->vfe); |
| zr_detach_codec: |
| videocodec_detach(zr->codec); |
| zr_unreg_videocodec: |
| videocodec_exit(zr); |
| zr_unreg_i2c: |
| zoran_i2c_exit(zr); |
| zr_free_irq: |
| btwrite(0, ZR36057_SPGPPCR); |
| pci_free_irq(zr->pci_dev, 0, zr); |
| zr_pci_release: |
| pci_release_regions(pdev); |
| zr_unreg: |
| v4l2_ctrl_handler_free(&zr->hdl); |
| v4l2_device_unregister(&zr->v4l2_dev); |
| zr_free_mem: |
| |
| return -ENODEV; |
| } |
| |
| static struct pci_driver zoran_driver = { |
| .name = "zr36067", |
| .id_table = zr36067_pci_tbl, |
| .probe = zoran_probe, |
| .remove = zoran_remove, |
| }; |
| |
| module_pci_driver(zoran_driver); |