| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * NVMEM layout bus handling |
| * |
| * Copyright (C) 2023 Bootlin |
| * Author: Miquel Raynal <miquel.raynal@bootlin.com |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/nvmem-consumer.h> |
| #include <linux/nvmem-provider.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_irq.h> |
| |
| #include "internals.h" |
| |
| #define to_nvmem_layout_driver(drv) \ |
| (container_of_const((drv), struct nvmem_layout_driver, driver)) |
| #define to_nvmem_layout_device(_dev) \ |
| container_of((_dev), struct nvmem_layout, dev) |
| |
| static int nvmem_layout_bus_match(struct device *dev, const struct device_driver *drv) |
| { |
| return of_driver_match_device(dev, drv); |
| } |
| |
| static int nvmem_layout_bus_probe(struct device *dev) |
| { |
| struct nvmem_layout_driver *drv = to_nvmem_layout_driver(dev->driver); |
| struct nvmem_layout *layout = to_nvmem_layout_device(dev); |
| |
| if (!drv->probe || !drv->remove) |
| return -EINVAL; |
| |
| return drv->probe(layout); |
| } |
| |
| static void nvmem_layout_bus_remove(struct device *dev) |
| { |
| struct nvmem_layout_driver *drv = to_nvmem_layout_driver(dev->driver); |
| struct nvmem_layout *layout = to_nvmem_layout_device(dev); |
| |
| return drv->remove(layout); |
| } |
| |
| static const struct bus_type nvmem_layout_bus_type = { |
| .name = "nvmem-layout", |
| .match = nvmem_layout_bus_match, |
| .probe = nvmem_layout_bus_probe, |
| .remove = nvmem_layout_bus_remove, |
| }; |
| |
| int __nvmem_layout_driver_register(struct nvmem_layout_driver *drv, |
| struct module *owner) |
| { |
| drv->driver.bus = &nvmem_layout_bus_type; |
| drv->driver.owner = owner; |
| |
| return driver_register(&drv->driver); |
| } |
| EXPORT_SYMBOL_GPL(__nvmem_layout_driver_register); |
| |
| void nvmem_layout_driver_unregister(struct nvmem_layout_driver *drv) |
| { |
| driver_unregister(&drv->driver); |
| } |
| EXPORT_SYMBOL_GPL(nvmem_layout_driver_unregister); |
| |
| static void nvmem_layout_release_device(struct device *dev) |
| { |
| struct nvmem_layout *layout = to_nvmem_layout_device(dev); |
| |
| of_node_put(layout->dev.of_node); |
| kfree(layout); |
| } |
| |
| static int nvmem_layout_create_device(struct nvmem_device *nvmem, |
| struct device_node *np) |
| { |
| struct nvmem_layout *layout; |
| struct device *dev; |
| int ret; |
| |
| layout = kzalloc(sizeof(*layout), GFP_KERNEL); |
| if (!layout) |
| return -ENOMEM; |
| |
| /* Create a bidirectional link */ |
| layout->nvmem = nvmem; |
| nvmem->layout = layout; |
| |
| /* Device model registration */ |
| dev = &layout->dev; |
| device_initialize(dev); |
| dev->parent = &nvmem->dev; |
| dev->bus = &nvmem_layout_bus_type; |
| dev->release = nvmem_layout_release_device; |
| dev->coherent_dma_mask = DMA_BIT_MASK(32); |
| dev->dma_mask = &dev->coherent_dma_mask; |
| device_set_node(dev, of_fwnode_handle(of_node_get(np))); |
| of_device_make_bus_id(dev); |
| of_msi_configure(dev, dev->of_node); |
| |
| ret = device_add(dev); |
| if (ret) { |
| put_device(dev); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct of_device_id of_nvmem_layout_skip_table[] = { |
| { .compatible = "fixed-layout", }, |
| {} |
| }; |
| |
| static int nvmem_layout_bus_populate(struct nvmem_device *nvmem, |
| struct device_node *layout_dn) |
| { |
| int ret; |
| |
| /* Make sure it has a compatible property */ |
| if (!of_property_present(layout_dn, "compatible")) { |
| pr_debug("%s() - skipping %pOF, no compatible prop\n", |
| __func__, layout_dn); |
| return 0; |
| } |
| |
| /* Fixed layouts are parsed manually somewhere else for now */ |
| if (of_match_node(of_nvmem_layout_skip_table, layout_dn)) { |
| pr_debug("%s() - skipping %pOF node\n", __func__, layout_dn); |
| return 0; |
| } |
| |
| if (of_node_check_flag(layout_dn, OF_POPULATED_BUS)) { |
| pr_debug("%s() - skipping %pOF, already populated\n", |
| __func__, layout_dn); |
| |
| return 0; |
| } |
| |
| /* NVMEM layout buses expect only a single device representing the layout */ |
| ret = nvmem_layout_create_device(nvmem, layout_dn); |
| if (ret) |
| return ret; |
| |
| of_node_set_flag(layout_dn, OF_POPULATED_BUS); |
| |
| return 0; |
| } |
| |
| struct device_node *of_nvmem_layout_get_container(struct nvmem_device *nvmem) |
| { |
| return of_get_child_by_name(nvmem->dev.of_node, "nvmem-layout"); |
| } |
| EXPORT_SYMBOL_GPL(of_nvmem_layout_get_container); |
| |
| /* |
| * Returns the number of devices populated, 0 if the operation was not relevant |
| * for this nvmem device, an error code otherwise. |
| */ |
| int nvmem_populate_layout(struct nvmem_device *nvmem) |
| { |
| struct device_node *layout_dn; |
| int ret; |
| |
| layout_dn = of_nvmem_layout_get_container(nvmem); |
| if (!layout_dn) |
| return 0; |
| |
| /* Populate the layout device */ |
| device_links_supplier_sync_state_pause(); |
| ret = nvmem_layout_bus_populate(nvmem, layout_dn); |
| device_links_supplier_sync_state_resume(); |
| |
| of_node_put(layout_dn); |
| return ret; |
| } |
| |
| void nvmem_destroy_layout(struct nvmem_device *nvmem) |
| { |
| struct device *dev; |
| |
| if (!nvmem->layout) |
| return; |
| |
| dev = &nvmem->layout->dev; |
| of_node_clear_flag(dev->of_node, OF_POPULATED_BUS); |
| device_unregister(dev); |
| } |
| |
| int nvmem_layout_bus_register(void) |
| { |
| return bus_register(&nvmem_layout_bus_type); |
| } |
| |
| void nvmem_layout_bus_unregister(void) |
| { |
| bus_unregister(&nvmem_layout_bus_type); |
| } |