| // SPDX-License-Identifier: GPL-2.0-only |
| #undef DEBUG |
| |
| /* |
| * ARM performance counter support. |
| * |
| * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles |
| * Copyright (C) 2010 ARM Ltd., Will Deacon <will.deacon@arm.com> |
| * |
| * This code is based on the sparc64 perf event code, which is in turn based |
| * on the x86 code. |
| */ |
| #define pr_fmt(fmt) "hw perfevents: " fmt |
| |
| #include <linux/bitmap.h> |
| #include <linux/cpumask.h> |
| #include <linux/cpu_pm.h> |
| #include <linux/export.h> |
| #include <linux/kernel.h> |
| #include <linux/perf/arm_pmu.h> |
| #include <linux/slab.h> |
| #include <linux/sched/clock.h> |
| #include <linux/spinlock.h> |
| #include <linux/irq.h> |
| #include <linux/irqdesc.h> |
| |
| #include <asm/irq_regs.h> |
| |
| static int armpmu_count_irq_users(const int irq); |
| |
| struct pmu_irq_ops { |
| void (*enable_pmuirq)(unsigned int irq); |
| void (*disable_pmuirq)(unsigned int irq); |
| void (*free_pmuirq)(unsigned int irq, int cpu, void __percpu *devid); |
| }; |
| |
| static void armpmu_free_pmuirq(unsigned int irq, int cpu, void __percpu *devid) |
| { |
| free_irq(irq, per_cpu_ptr(devid, cpu)); |
| } |
| |
| static const struct pmu_irq_ops pmuirq_ops = { |
| .enable_pmuirq = enable_irq, |
| .disable_pmuirq = disable_irq_nosync, |
| .free_pmuirq = armpmu_free_pmuirq |
| }; |
| |
| static void armpmu_free_pmunmi(unsigned int irq, int cpu, void __percpu *devid) |
| { |
| free_nmi(irq, per_cpu_ptr(devid, cpu)); |
| } |
| |
| static const struct pmu_irq_ops pmunmi_ops = { |
| .enable_pmuirq = enable_nmi, |
| .disable_pmuirq = disable_nmi_nosync, |
| .free_pmuirq = armpmu_free_pmunmi |
| }; |
| |
| static void armpmu_enable_percpu_pmuirq(unsigned int irq) |
| { |
| enable_percpu_irq(irq, IRQ_TYPE_NONE); |
| } |
| |
| static void armpmu_free_percpu_pmuirq(unsigned int irq, int cpu, |
| void __percpu *devid) |
| { |
| if (armpmu_count_irq_users(irq) == 1) |
| free_percpu_irq(irq, devid); |
| } |
| |
| static const struct pmu_irq_ops percpu_pmuirq_ops = { |
| .enable_pmuirq = armpmu_enable_percpu_pmuirq, |
| .disable_pmuirq = disable_percpu_irq, |
| .free_pmuirq = armpmu_free_percpu_pmuirq |
| }; |
| |
| static void armpmu_enable_percpu_pmunmi(unsigned int irq) |
| { |
| if (!prepare_percpu_nmi(irq)) |
| enable_percpu_nmi(irq, IRQ_TYPE_NONE); |
| } |
| |
| static void armpmu_disable_percpu_pmunmi(unsigned int irq) |
| { |
| disable_percpu_nmi(irq); |
| teardown_percpu_nmi(irq); |
| } |
| |
| static void armpmu_free_percpu_pmunmi(unsigned int irq, int cpu, |
| void __percpu *devid) |
| { |
| if (armpmu_count_irq_users(irq) == 1) |
| free_percpu_nmi(irq, devid); |
| } |
| |
| static const struct pmu_irq_ops percpu_pmunmi_ops = { |
| .enable_pmuirq = armpmu_enable_percpu_pmunmi, |
| .disable_pmuirq = armpmu_disable_percpu_pmunmi, |
| .free_pmuirq = armpmu_free_percpu_pmunmi |
| }; |
| |
| static DEFINE_PER_CPU(struct arm_pmu *, cpu_armpmu); |
| static DEFINE_PER_CPU(int, cpu_irq); |
| static DEFINE_PER_CPU(const struct pmu_irq_ops *, cpu_irq_ops); |
| |
| static bool has_nmi; |
| |
| static inline u64 arm_pmu_event_max_period(struct perf_event *event) |
| { |
| if (event->hw.flags & ARMPMU_EVT_64BIT) |
| return GENMASK_ULL(63, 0); |
| else if (event->hw.flags & ARMPMU_EVT_63BIT) |
| return GENMASK_ULL(62, 0); |
| else if (event->hw.flags & ARMPMU_EVT_47BIT) |
| return GENMASK_ULL(46, 0); |
| else |
| return GENMASK_ULL(31, 0); |
| } |
| |
| static int |
| armpmu_map_cache_event(const unsigned (*cache_map) |
| [PERF_COUNT_HW_CACHE_MAX] |
| [PERF_COUNT_HW_CACHE_OP_MAX] |
| [PERF_COUNT_HW_CACHE_RESULT_MAX], |
| u64 config) |
| { |
| unsigned int cache_type, cache_op, cache_result, ret; |
| |
| cache_type = (config >> 0) & 0xff; |
| if (cache_type >= PERF_COUNT_HW_CACHE_MAX) |
| return -EINVAL; |
| |
| cache_op = (config >> 8) & 0xff; |
| if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX) |
| return -EINVAL; |
| |
| cache_result = (config >> 16) & 0xff; |
| if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) |
| return -EINVAL; |
| |
| if (!cache_map) |
| return -ENOENT; |
| |
| ret = (int)(*cache_map)[cache_type][cache_op][cache_result]; |
| |
| if (ret == CACHE_OP_UNSUPPORTED) |
| return -ENOENT; |
| |
| return ret; |
| } |
| |
| static int |
| armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config) |
| { |
| int mapping; |
| |
| if (config >= PERF_COUNT_HW_MAX) |
| return -EINVAL; |
| |
| if (!event_map) |
| return -ENOENT; |
| |
| mapping = (*event_map)[config]; |
| return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping; |
| } |
| |
| static int |
| armpmu_map_raw_event(u32 raw_event_mask, u64 config) |
| { |
| return (int)(config & raw_event_mask); |
| } |
| |
| int |
| armpmu_map_event(struct perf_event *event, |
| const unsigned (*event_map)[PERF_COUNT_HW_MAX], |
| const unsigned (*cache_map) |
| [PERF_COUNT_HW_CACHE_MAX] |
| [PERF_COUNT_HW_CACHE_OP_MAX] |
| [PERF_COUNT_HW_CACHE_RESULT_MAX], |
| u32 raw_event_mask) |
| { |
| u64 config = event->attr.config; |
| int type = event->attr.type; |
| |
| if (type == event->pmu->type) |
| return armpmu_map_raw_event(raw_event_mask, config); |
| |
| switch (type) { |
| case PERF_TYPE_HARDWARE: |
| return armpmu_map_hw_event(event_map, config); |
| case PERF_TYPE_HW_CACHE: |
| return armpmu_map_cache_event(cache_map, config); |
| case PERF_TYPE_RAW: |
| return armpmu_map_raw_event(raw_event_mask, config); |
| } |
| |
| return -ENOENT; |
| } |
| |
| int armpmu_event_set_period(struct perf_event *event) |
| { |
| struct arm_pmu *armpmu = to_arm_pmu(event->pmu); |
| struct hw_perf_event *hwc = &event->hw; |
| s64 left = local64_read(&hwc->period_left); |
| s64 period = hwc->sample_period; |
| u64 max_period; |
| int ret = 0; |
| |
| max_period = arm_pmu_event_max_period(event); |
| if (unlikely(left <= -period)) { |
| left = period; |
| local64_set(&hwc->period_left, left); |
| hwc->last_period = period; |
| ret = 1; |
| } |
| |
| if (unlikely(left <= 0)) { |
| left += period; |
| local64_set(&hwc->period_left, left); |
| hwc->last_period = period; |
| ret = 1; |
| } |
| |
| /* |
| * Limit the maximum period to prevent the counter value |
| * from overtaking the one we are about to program. In |
| * effect we are reducing max_period to account for |
| * interrupt latency (and we are being very conservative). |
| */ |
| if (left > (max_period >> 1)) |
| left = (max_period >> 1); |
| |
| local64_set(&hwc->prev_count, (u64)-left); |
| |
| armpmu->write_counter(event, (u64)(-left) & max_period); |
| |
| perf_event_update_userpage(event); |
| |
| return ret; |
| } |
| |
| u64 armpmu_event_update(struct perf_event *event) |
| { |
| struct arm_pmu *armpmu = to_arm_pmu(event->pmu); |
| struct hw_perf_event *hwc = &event->hw; |
| u64 delta, prev_raw_count, new_raw_count; |
| u64 max_period = arm_pmu_event_max_period(event); |
| |
| again: |
| prev_raw_count = local64_read(&hwc->prev_count); |
| new_raw_count = armpmu->read_counter(event); |
| |
| if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, |
| new_raw_count) != prev_raw_count) |
| goto again; |
| |
| delta = (new_raw_count - prev_raw_count) & max_period; |
| |
| local64_add(delta, &event->count); |
| local64_sub(delta, &hwc->period_left); |
| |
| return new_raw_count; |
| } |
| |
| static void |
| armpmu_read(struct perf_event *event) |
| { |
| armpmu_event_update(event); |
| } |
| |
| static void |
| armpmu_stop(struct perf_event *event, int flags) |
| { |
| struct arm_pmu *armpmu = to_arm_pmu(event->pmu); |
| struct hw_perf_event *hwc = &event->hw; |
| |
| /* |
| * ARM pmu always has to update the counter, so ignore |
| * PERF_EF_UPDATE, see comments in armpmu_start(). |
| */ |
| if (!(hwc->state & PERF_HES_STOPPED)) { |
| armpmu->disable(event); |
| armpmu_event_update(event); |
| hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; |
| } |
| } |
| |
| static void armpmu_start(struct perf_event *event, int flags) |
| { |
| struct arm_pmu *armpmu = to_arm_pmu(event->pmu); |
| struct hw_perf_event *hwc = &event->hw; |
| |
| /* |
| * ARM pmu always has to reprogram the period, so ignore |
| * PERF_EF_RELOAD, see the comment below. |
| */ |
| if (flags & PERF_EF_RELOAD) |
| WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE)); |
| |
| hwc->state = 0; |
| /* |
| * Set the period again. Some counters can't be stopped, so when we |
| * were stopped we simply disabled the IRQ source and the counter |
| * may have been left counting. If we don't do this step then we may |
| * get an interrupt too soon or *way* too late if the overflow has |
| * happened since disabling. |
| */ |
| armpmu_event_set_period(event); |
| armpmu->enable(event); |
| } |
| |
| static void |
| armpmu_del(struct perf_event *event, int flags) |
| { |
| struct arm_pmu *armpmu = to_arm_pmu(event->pmu); |
| struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events); |
| struct hw_perf_event *hwc = &event->hw; |
| int idx = hwc->idx; |
| |
| armpmu_stop(event, PERF_EF_UPDATE); |
| hw_events->events[idx] = NULL; |
| armpmu->clear_event_idx(hw_events, event); |
| perf_event_update_userpage(event); |
| /* Clear the allocated counter */ |
| hwc->idx = -1; |
| } |
| |
| static int |
| armpmu_add(struct perf_event *event, int flags) |
| { |
| struct arm_pmu *armpmu = to_arm_pmu(event->pmu); |
| struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events); |
| struct hw_perf_event *hwc = &event->hw; |
| int idx; |
| |
| /* An event following a process won't be stopped earlier */ |
| if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus)) |
| return -ENOENT; |
| |
| /* If we don't have a space for the counter then finish early. */ |
| idx = armpmu->get_event_idx(hw_events, event); |
| if (idx < 0) |
| return idx; |
| |
| /* |
| * If there is an event in the counter we are going to use then make |
| * sure it is disabled. |
| */ |
| event->hw.idx = idx; |
| armpmu->disable(event); |
| hw_events->events[idx] = event; |
| |
| hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; |
| if (flags & PERF_EF_START) |
| armpmu_start(event, PERF_EF_RELOAD); |
| |
| /* Propagate our changes to the userspace mapping. */ |
| perf_event_update_userpage(event); |
| |
| return 0; |
| } |
| |
| static int |
| validate_event(struct pmu *pmu, struct pmu_hw_events *hw_events, |
| struct perf_event *event) |
| { |
| struct arm_pmu *armpmu; |
| |
| if (is_software_event(event)) |
| return 1; |
| |
| /* |
| * Reject groups spanning multiple HW PMUs (e.g. CPU + CCI). The |
| * core perf code won't check that the pmu->ctx == leader->ctx |
| * until after pmu->event_init(event). |
| */ |
| if (event->pmu != pmu) |
| return 0; |
| |
| if (event->state < PERF_EVENT_STATE_OFF) |
| return 1; |
| |
| if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec) |
| return 1; |
| |
| armpmu = to_arm_pmu(event->pmu); |
| return armpmu->get_event_idx(hw_events, event) >= 0; |
| } |
| |
| static int |
| validate_group(struct perf_event *event) |
| { |
| struct perf_event *sibling, *leader = event->group_leader; |
| struct pmu_hw_events fake_pmu; |
| |
| /* |
| * Initialise the fake PMU. We only need to populate the |
| * used_mask for the purposes of validation. |
| */ |
| memset(&fake_pmu.used_mask, 0, sizeof(fake_pmu.used_mask)); |
| |
| if (!validate_event(event->pmu, &fake_pmu, leader)) |
| return -EINVAL; |
| |
| if (event == leader) |
| return 0; |
| |
| for_each_sibling_event(sibling, leader) { |
| if (!validate_event(event->pmu, &fake_pmu, sibling)) |
| return -EINVAL; |
| } |
| |
| if (!validate_event(event->pmu, &fake_pmu, event)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static irqreturn_t armpmu_dispatch_irq(int irq, void *dev) |
| { |
| struct arm_pmu *armpmu; |
| int ret; |
| u64 start_clock, finish_clock; |
| |
| /* |
| * we request the IRQ with a (possibly percpu) struct arm_pmu**, but |
| * the handlers expect a struct arm_pmu*. The percpu_irq framework will |
| * do any necessary shifting, we just need to perform the first |
| * dereference. |
| */ |
| armpmu = *(void **)dev; |
| if (WARN_ON_ONCE(!armpmu)) |
| return IRQ_NONE; |
| |
| start_clock = sched_clock(); |
| ret = armpmu->handle_irq(armpmu); |
| finish_clock = sched_clock(); |
| |
| perf_sample_event_took(finish_clock - start_clock); |
| return ret; |
| } |
| |
| static int |
| __hw_perf_event_init(struct perf_event *event) |
| { |
| struct arm_pmu *armpmu = to_arm_pmu(event->pmu); |
| struct hw_perf_event *hwc = &event->hw; |
| int mapping, ret; |
| |
| hwc->flags = 0; |
| mapping = armpmu->map_event(event); |
| |
| if (mapping < 0) { |
| pr_debug("event %x:%llx not supported\n", event->attr.type, |
| event->attr.config); |
| return mapping; |
| } |
| |
| /* |
| * We don't assign an index until we actually place the event onto |
| * hardware. Use -1 to signify that we haven't decided where to put it |
| * yet. For SMP systems, each core has it's own PMU so we can't do any |
| * clever allocation or constraints checking at this point. |
| */ |
| hwc->idx = -1; |
| hwc->config_base = 0; |
| hwc->config = 0; |
| hwc->event_base = 0; |
| |
| /* |
| * Check whether we need to exclude the counter from certain modes. |
| */ |
| if (armpmu->set_event_filter) { |
| ret = armpmu->set_event_filter(hwc, &event->attr); |
| if (ret) |
| return ret; |
| } |
| |
| /* |
| * Store the event encoding into the config_base field. |
| */ |
| hwc->config_base |= (unsigned long)mapping; |
| |
| if (!is_sampling_event(event)) { |
| /* |
| * For non-sampling runs, limit the sample_period to half |
| * of the counter width. That way, the new counter value |
| * is far less likely to overtake the previous one unless |
| * you have some serious IRQ latency issues. |
| */ |
| hwc->sample_period = arm_pmu_event_max_period(event) >> 1; |
| hwc->last_period = hwc->sample_period; |
| local64_set(&hwc->period_left, hwc->sample_period); |
| } |
| |
| return validate_group(event); |
| } |
| |
| static int armpmu_event_init(struct perf_event *event) |
| { |
| struct arm_pmu *armpmu = to_arm_pmu(event->pmu); |
| |
| /* |
| * Reject CPU-affine events for CPUs that are of a different class to |
| * that which this PMU handles. Process-following events (where |
| * event->cpu == -1) can be migrated between CPUs, and thus we have to |
| * reject them later (in armpmu_add) if they're scheduled on a |
| * different class of CPU. |
| */ |
| if (event->cpu != -1 && |
| !cpumask_test_cpu(event->cpu, &armpmu->supported_cpus)) |
| return -ENOENT; |
| |
| /* does not support taken branch sampling */ |
| if (has_branch_stack(event)) |
| return -EOPNOTSUPP; |
| |
| return __hw_perf_event_init(event); |
| } |
| |
| static void armpmu_enable(struct pmu *pmu) |
| { |
| struct arm_pmu *armpmu = to_arm_pmu(pmu); |
| struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events); |
| bool enabled = !bitmap_empty(hw_events->used_mask, ARMPMU_MAX_HWEVENTS); |
| |
| /* For task-bound events we may be called on other CPUs */ |
| if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus)) |
| return; |
| |
| if (enabled) |
| armpmu->start(armpmu); |
| } |
| |
| static void armpmu_disable(struct pmu *pmu) |
| { |
| struct arm_pmu *armpmu = to_arm_pmu(pmu); |
| |
| /* For task-bound events we may be called on other CPUs */ |
| if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus)) |
| return; |
| |
| armpmu->stop(armpmu); |
| } |
| |
| /* |
| * In heterogeneous systems, events are specific to a particular |
| * microarchitecture, and aren't suitable for another. Thus, only match CPUs of |
| * the same microarchitecture. |
| */ |
| static bool armpmu_filter(struct pmu *pmu, int cpu) |
| { |
| struct arm_pmu *armpmu = to_arm_pmu(pmu); |
| return !cpumask_test_cpu(cpu, &armpmu->supported_cpus); |
| } |
| |
| static ssize_t cpus_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct arm_pmu *armpmu = to_arm_pmu(dev_get_drvdata(dev)); |
| return cpumap_print_to_pagebuf(true, buf, &armpmu->supported_cpus); |
| } |
| |
| static DEVICE_ATTR_RO(cpus); |
| |
| static struct attribute *armpmu_common_attrs[] = { |
| &dev_attr_cpus.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group armpmu_common_attr_group = { |
| .attrs = armpmu_common_attrs, |
| }; |
| |
| static int armpmu_count_irq_users(const int irq) |
| { |
| int cpu, count = 0; |
| |
| for_each_possible_cpu(cpu) { |
| if (per_cpu(cpu_irq, cpu) == irq) |
| count++; |
| } |
| |
| return count; |
| } |
| |
| static const struct pmu_irq_ops *armpmu_find_irq_ops(int irq) |
| { |
| const struct pmu_irq_ops *ops = NULL; |
| int cpu; |
| |
| for_each_possible_cpu(cpu) { |
| if (per_cpu(cpu_irq, cpu) != irq) |
| continue; |
| |
| ops = per_cpu(cpu_irq_ops, cpu); |
| if (ops) |
| break; |
| } |
| |
| return ops; |
| } |
| |
| void armpmu_free_irq(int irq, int cpu) |
| { |
| if (per_cpu(cpu_irq, cpu) == 0) |
| return; |
| if (WARN_ON(irq != per_cpu(cpu_irq, cpu))) |
| return; |
| |
| per_cpu(cpu_irq_ops, cpu)->free_pmuirq(irq, cpu, &cpu_armpmu); |
| |
| per_cpu(cpu_irq, cpu) = 0; |
| per_cpu(cpu_irq_ops, cpu) = NULL; |
| } |
| |
| int armpmu_request_irq(int irq, int cpu) |
| { |
| int err = 0; |
| const irq_handler_t handler = armpmu_dispatch_irq; |
| const struct pmu_irq_ops *irq_ops; |
| |
| if (!irq) |
| return 0; |
| |
| if (!irq_is_percpu_devid(irq)) { |
| unsigned long irq_flags; |
| |
| err = irq_force_affinity(irq, cpumask_of(cpu)); |
| |
| if (err && num_possible_cpus() > 1) { |
| pr_warn("unable to set irq affinity (irq=%d, cpu=%u)\n", |
| irq, cpu); |
| goto err_out; |
| } |
| |
| irq_flags = IRQF_PERCPU | |
| IRQF_NOBALANCING | IRQF_NO_AUTOEN | |
| IRQF_NO_THREAD; |
| |
| err = request_nmi(irq, handler, irq_flags, "arm-pmu", |
| per_cpu_ptr(&cpu_armpmu, cpu)); |
| |
| /* If cannot get an NMI, get a normal interrupt */ |
| if (err) { |
| err = request_irq(irq, handler, irq_flags, "arm-pmu", |
| per_cpu_ptr(&cpu_armpmu, cpu)); |
| irq_ops = &pmuirq_ops; |
| } else { |
| has_nmi = true; |
| irq_ops = &pmunmi_ops; |
| } |
| } else if (armpmu_count_irq_users(irq) == 0) { |
| err = request_percpu_nmi(irq, handler, "arm-pmu", &cpu_armpmu); |
| |
| /* If cannot get an NMI, get a normal interrupt */ |
| if (err) { |
| err = request_percpu_irq(irq, handler, "arm-pmu", |
| &cpu_armpmu); |
| irq_ops = &percpu_pmuirq_ops; |
| } else { |
| has_nmi = true; |
| irq_ops = &percpu_pmunmi_ops; |
| } |
| } else { |
| /* Per cpudevid irq was already requested by another CPU */ |
| irq_ops = armpmu_find_irq_ops(irq); |
| |
| if (WARN_ON(!irq_ops)) |
| err = -EINVAL; |
| } |
| |
| if (err) |
| goto err_out; |
| |
| per_cpu(cpu_irq, cpu) = irq; |
| per_cpu(cpu_irq_ops, cpu) = irq_ops; |
| return 0; |
| |
| err_out: |
| pr_err("unable to request IRQ%d for ARM PMU counters\n", irq); |
| return err; |
| } |
| |
| static int armpmu_get_cpu_irq(struct arm_pmu *pmu, int cpu) |
| { |
| struct pmu_hw_events __percpu *hw_events = pmu->hw_events; |
| return per_cpu(hw_events->irq, cpu); |
| } |
| |
| bool arm_pmu_irq_is_nmi(void) |
| { |
| return has_nmi; |
| } |
| |
| /* |
| * PMU hardware loses all context when a CPU goes offline. |
| * When a CPU is hotplugged back in, since some hardware registers are |
| * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading |
| * junk values out of them. |
| */ |
| static int arm_perf_starting_cpu(unsigned int cpu, struct hlist_node *node) |
| { |
| struct arm_pmu *pmu = hlist_entry_safe(node, struct arm_pmu, node); |
| int irq; |
| |
| if (!cpumask_test_cpu(cpu, &pmu->supported_cpus)) |
| return 0; |
| if (pmu->reset) |
| pmu->reset(pmu); |
| |
| per_cpu(cpu_armpmu, cpu) = pmu; |
| |
| irq = armpmu_get_cpu_irq(pmu, cpu); |
| if (irq) |
| per_cpu(cpu_irq_ops, cpu)->enable_pmuirq(irq); |
| |
| return 0; |
| } |
| |
| static int arm_perf_teardown_cpu(unsigned int cpu, struct hlist_node *node) |
| { |
| struct arm_pmu *pmu = hlist_entry_safe(node, struct arm_pmu, node); |
| int irq; |
| |
| if (!cpumask_test_cpu(cpu, &pmu->supported_cpus)) |
| return 0; |
| |
| irq = armpmu_get_cpu_irq(pmu, cpu); |
| if (irq) |
| per_cpu(cpu_irq_ops, cpu)->disable_pmuirq(irq); |
| |
| per_cpu(cpu_armpmu, cpu) = NULL; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_CPU_PM |
| static void cpu_pm_pmu_setup(struct arm_pmu *armpmu, unsigned long cmd) |
| { |
| struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events); |
| struct perf_event *event; |
| int idx; |
| |
| for_each_set_bit(idx, armpmu->cntr_mask, ARMPMU_MAX_HWEVENTS) { |
| event = hw_events->events[idx]; |
| if (!event) |
| continue; |
| |
| switch (cmd) { |
| case CPU_PM_ENTER: |
| /* |
| * Stop and update the counter |
| */ |
| armpmu_stop(event, PERF_EF_UPDATE); |
| break; |
| case CPU_PM_EXIT: |
| case CPU_PM_ENTER_FAILED: |
| /* |
| * Restore and enable the counter. |
| */ |
| armpmu_start(event, PERF_EF_RELOAD); |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| |
| static int cpu_pm_pmu_notify(struct notifier_block *b, unsigned long cmd, |
| void *v) |
| { |
| struct arm_pmu *armpmu = container_of(b, struct arm_pmu, cpu_pm_nb); |
| struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events); |
| bool enabled = !bitmap_empty(hw_events->used_mask, ARMPMU_MAX_HWEVENTS); |
| |
| if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus)) |
| return NOTIFY_DONE; |
| |
| /* |
| * Always reset the PMU registers on power-up even if |
| * there are no events running. |
| */ |
| if (cmd == CPU_PM_EXIT && armpmu->reset) |
| armpmu->reset(armpmu); |
| |
| if (!enabled) |
| return NOTIFY_OK; |
| |
| switch (cmd) { |
| case CPU_PM_ENTER: |
| armpmu->stop(armpmu); |
| cpu_pm_pmu_setup(armpmu, cmd); |
| break; |
| case CPU_PM_EXIT: |
| case CPU_PM_ENTER_FAILED: |
| cpu_pm_pmu_setup(armpmu, cmd); |
| armpmu->start(armpmu); |
| break; |
| default: |
| return NOTIFY_DONE; |
| } |
| |
| return NOTIFY_OK; |
| } |
| |
| static int cpu_pm_pmu_register(struct arm_pmu *cpu_pmu) |
| { |
| cpu_pmu->cpu_pm_nb.notifier_call = cpu_pm_pmu_notify; |
| return cpu_pm_register_notifier(&cpu_pmu->cpu_pm_nb); |
| } |
| |
| static void cpu_pm_pmu_unregister(struct arm_pmu *cpu_pmu) |
| { |
| cpu_pm_unregister_notifier(&cpu_pmu->cpu_pm_nb); |
| } |
| #else |
| static inline int cpu_pm_pmu_register(struct arm_pmu *cpu_pmu) { return 0; } |
| static inline void cpu_pm_pmu_unregister(struct arm_pmu *cpu_pmu) { } |
| #endif |
| |
| static int cpu_pmu_init(struct arm_pmu *cpu_pmu) |
| { |
| int err; |
| |
| err = cpuhp_state_add_instance(CPUHP_AP_PERF_ARM_STARTING, |
| &cpu_pmu->node); |
| if (err) |
| goto out; |
| |
| err = cpu_pm_pmu_register(cpu_pmu); |
| if (err) |
| goto out_unregister; |
| |
| return 0; |
| |
| out_unregister: |
| cpuhp_state_remove_instance_nocalls(CPUHP_AP_PERF_ARM_STARTING, |
| &cpu_pmu->node); |
| out: |
| return err; |
| } |
| |
| static void cpu_pmu_destroy(struct arm_pmu *cpu_pmu) |
| { |
| cpu_pm_pmu_unregister(cpu_pmu); |
| cpuhp_state_remove_instance_nocalls(CPUHP_AP_PERF_ARM_STARTING, |
| &cpu_pmu->node); |
| } |
| |
| struct arm_pmu *armpmu_alloc(void) |
| { |
| struct arm_pmu *pmu; |
| int cpu; |
| |
| pmu = kzalloc(sizeof(*pmu), GFP_KERNEL); |
| if (!pmu) |
| goto out; |
| |
| pmu->hw_events = alloc_percpu_gfp(struct pmu_hw_events, GFP_KERNEL); |
| if (!pmu->hw_events) { |
| pr_info("failed to allocate per-cpu PMU data.\n"); |
| goto out_free_pmu; |
| } |
| |
| pmu->pmu = (struct pmu) { |
| .pmu_enable = armpmu_enable, |
| .pmu_disable = armpmu_disable, |
| .event_init = armpmu_event_init, |
| .add = armpmu_add, |
| .del = armpmu_del, |
| .start = armpmu_start, |
| .stop = armpmu_stop, |
| .read = armpmu_read, |
| .filter = armpmu_filter, |
| .attr_groups = pmu->attr_groups, |
| /* |
| * This is a CPU PMU potentially in a heterogeneous |
| * configuration (e.g. big.LITTLE) so |
| * PERF_PMU_CAP_EXTENDED_HW_TYPE is required to open |
| * PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE events on a |
| * specific PMU. |
| */ |
| .capabilities = PERF_PMU_CAP_EXTENDED_REGS | |
| PERF_PMU_CAP_EXTENDED_HW_TYPE, |
| }; |
| |
| pmu->attr_groups[ARMPMU_ATTR_GROUP_COMMON] = |
| &armpmu_common_attr_group; |
| |
| for_each_possible_cpu(cpu) { |
| struct pmu_hw_events *events; |
| |
| events = per_cpu_ptr(pmu->hw_events, cpu); |
| events->percpu_pmu = pmu; |
| } |
| |
| return pmu; |
| |
| out_free_pmu: |
| kfree(pmu); |
| out: |
| return NULL; |
| } |
| |
| void armpmu_free(struct arm_pmu *pmu) |
| { |
| free_percpu(pmu->hw_events); |
| kfree(pmu); |
| } |
| |
| int armpmu_register(struct arm_pmu *pmu) |
| { |
| int ret; |
| |
| ret = cpu_pmu_init(pmu); |
| if (ret) |
| return ret; |
| |
| if (!pmu->set_event_filter) |
| pmu->pmu.capabilities |= PERF_PMU_CAP_NO_EXCLUDE; |
| |
| ret = perf_pmu_register(&pmu->pmu, pmu->name, -1); |
| if (ret) |
| goto out_destroy; |
| |
| pr_info("enabled with %s PMU driver, %d (%*pb) counters available%s\n", |
| pmu->name, bitmap_weight(pmu->cntr_mask, ARMPMU_MAX_HWEVENTS), |
| ARMPMU_MAX_HWEVENTS, &pmu->cntr_mask, |
| has_nmi ? ", using NMIs" : ""); |
| |
| kvm_host_pmu_init(pmu); |
| |
| return 0; |
| |
| out_destroy: |
| cpu_pmu_destroy(pmu); |
| return ret; |
| } |
| |
| static int arm_pmu_hp_init(void) |
| { |
| int ret; |
| |
| ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_ARM_STARTING, |
| "perf/arm/pmu:starting", |
| arm_perf_starting_cpu, |
| arm_perf_teardown_cpu); |
| if (ret) |
| pr_err("CPU hotplug notifier for ARM PMU could not be registered: %d\n", |
| ret); |
| return ret; |
| } |
| subsys_initcall(arm_pmu_hp_init); |