| // SPDX-License-Identifier: GPL-2.0+ |
| // Copyright (c) 2016-2017 Hisilicon Limited. |
| |
| #include <linux/etherdevice.h> |
| #include <linux/kernel.h> |
| #include <linux/marvell_phy.h> |
| |
| #include "hclge_cmd.h" |
| #include "hclge_main.h" |
| #include "hclge_mdio.h" |
| |
| enum hclge_mdio_c22_op_seq { |
| HCLGE_MDIO_C22_WRITE = 1, |
| HCLGE_MDIO_C22_READ = 2 |
| }; |
| |
| #define HCLGE_MDIO_CTRL_START_B 0 |
| #define HCLGE_MDIO_CTRL_ST_S 1 |
| #define HCLGE_MDIO_CTRL_ST_M (0x3 << HCLGE_MDIO_CTRL_ST_S) |
| #define HCLGE_MDIO_CTRL_OP_S 3 |
| #define HCLGE_MDIO_CTRL_OP_M (0x3 << HCLGE_MDIO_CTRL_OP_S) |
| |
| #define HCLGE_MDIO_PHYID_S 0 |
| #define HCLGE_MDIO_PHYID_M (0x1f << HCLGE_MDIO_PHYID_S) |
| |
| #define HCLGE_MDIO_PHYREG_S 0 |
| #define HCLGE_MDIO_PHYREG_M (0x1f << HCLGE_MDIO_PHYREG_S) |
| |
| #define HCLGE_MDIO_STA_B 0 |
| |
| struct hclge_mdio_cfg_cmd { |
| u8 ctrl_bit; |
| u8 phyid; |
| u8 phyad; |
| u8 rsvd; |
| __le16 reserve; |
| __le16 data_wr; |
| __le16 data_rd; |
| __le16 sta; |
| }; |
| |
| static int hclge_mdio_write(struct mii_bus *bus, int phyid, int regnum, |
| u16 data) |
| { |
| struct hclge_mdio_cfg_cmd *mdio_cmd; |
| struct hclge_dev *hdev = bus->priv; |
| struct hclge_desc desc; |
| int ret; |
| |
| if (test_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state)) |
| return -EBUSY; |
| |
| hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MDIO_CONFIG, false); |
| |
| mdio_cmd = (struct hclge_mdio_cfg_cmd *)desc.data; |
| |
| hnae3_set_field(mdio_cmd->phyid, HCLGE_MDIO_PHYID_M, |
| HCLGE_MDIO_PHYID_S, (u32)phyid); |
| hnae3_set_field(mdio_cmd->phyad, HCLGE_MDIO_PHYREG_M, |
| HCLGE_MDIO_PHYREG_S, (u32)regnum); |
| |
| hnae3_set_bit(mdio_cmd->ctrl_bit, HCLGE_MDIO_CTRL_START_B, 1); |
| hnae3_set_field(mdio_cmd->ctrl_bit, HCLGE_MDIO_CTRL_ST_M, |
| HCLGE_MDIO_CTRL_ST_S, 1); |
| hnae3_set_field(mdio_cmd->ctrl_bit, HCLGE_MDIO_CTRL_OP_M, |
| HCLGE_MDIO_CTRL_OP_S, HCLGE_MDIO_C22_WRITE); |
| |
| mdio_cmd->data_wr = cpu_to_le16(data); |
| |
| ret = hclge_cmd_send(&hdev->hw, &desc, 1); |
| if (ret) { |
| dev_err(&hdev->pdev->dev, |
| "mdio write fail when sending cmd, status is %d.\n", |
| ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int hclge_mdio_read(struct mii_bus *bus, int phyid, int regnum) |
| { |
| struct hclge_mdio_cfg_cmd *mdio_cmd; |
| struct hclge_dev *hdev = bus->priv; |
| struct hclge_desc desc; |
| int ret; |
| |
| if (test_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state)) |
| return -EBUSY; |
| |
| hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MDIO_CONFIG, true); |
| |
| mdio_cmd = (struct hclge_mdio_cfg_cmd *)desc.data; |
| |
| hnae3_set_field(mdio_cmd->phyid, HCLGE_MDIO_PHYID_M, |
| HCLGE_MDIO_PHYID_S, (u32)phyid); |
| hnae3_set_field(mdio_cmd->phyad, HCLGE_MDIO_PHYREG_M, |
| HCLGE_MDIO_PHYREG_S, (u32)regnum); |
| |
| hnae3_set_bit(mdio_cmd->ctrl_bit, HCLGE_MDIO_CTRL_START_B, 1); |
| hnae3_set_field(mdio_cmd->ctrl_bit, HCLGE_MDIO_CTRL_ST_M, |
| HCLGE_MDIO_CTRL_ST_S, 1); |
| hnae3_set_field(mdio_cmd->ctrl_bit, HCLGE_MDIO_CTRL_OP_M, |
| HCLGE_MDIO_CTRL_OP_S, HCLGE_MDIO_C22_READ); |
| |
| /* Read out phy data */ |
| ret = hclge_cmd_send(&hdev->hw, &desc, 1); |
| if (ret) { |
| dev_err(&hdev->pdev->dev, |
| "mdio read fail when get data, status is %d.\n", |
| ret); |
| return ret; |
| } |
| |
| if (hnae3_get_bit(le16_to_cpu(mdio_cmd->sta), HCLGE_MDIO_STA_B)) { |
| dev_err(&hdev->pdev->dev, "mdio read data error\n"); |
| return -EIO; |
| } |
| |
| return le16_to_cpu(mdio_cmd->data_rd); |
| } |
| |
| int hclge_mac_mdio_config(struct hclge_dev *hdev) |
| { |
| #define PHY_INEXISTENT 255 |
| |
| struct hclge_mac *mac = &hdev->hw.mac; |
| struct phy_device *phydev; |
| struct mii_bus *mdio_bus; |
| int ret; |
| |
| if (hdev->hw.mac.phy_addr == PHY_INEXISTENT) { |
| dev_info(&hdev->pdev->dev, |
| "no phy device is connected to mdio bus\n"); |
| return 0; |
| } else if (hdev->hw.mac.phy_addr >= PHY_MAX_ADDR) { |
| dev_err(&hdev->pdev->dev, "phy_addr(%u) is too large.\n", |
| hdev->hw.mac.phy_addr); |
| return -EINVAL; |
| } |
| |
| mdio_bus = devm_mdiobus_alloc(&hdev->pdev->dev); |
| if (!mdio_bus) |
| return -ENOMEM; |
| |
| mdio_bus->name = "hisilicon MII bus"; |
| mdio_bus->read = hclge_mdio_read; |
| mdio_bus->write = hclge_mdio_write; |
| snprintf(mdio_bus->id, MII_BUS_ID_SIZE, "%s-%s", "mii", |
| dev_name(&hdev->pdev->dev)); |
| |
| mdio_bus->parent = &hdev->pdev->dev; |
| mdio_bus->priv = hdev; |
| mdio_bus->phy_mask = ~(1 << mac->phy_addr); |
| ret = mdiobus_register(mdio_bus); |
| if (ret) { |
| dev_err(mdio_bus->parent, |
| "failed to register MDIO bus, ret = %d\n", ret); |
| return ret; |
| } |
| |
| phydev = mdiobus_get_phy(mdio_bus, mac->phy_addr); |
| if (!phydev) { |
| dev_err(mdio_bus->parent, "Failed to get phy device\n"); |
| mdiobus_unregister(mdio_bus); |
| return -EIO; |
| } |
| |
| mac->phydev = phydev; |
| mac->mdio_bus = mdio_bus; |
| |
| return 0; |
| } |
| |
| static void hclge_mac_adjust_link(struct net_device *netdev) |
| { |
| struct hnae3_handle *h = *((void **)netdev_priv(netdev)); |
| struct hclge_vport *vport = hclge_get_vport(h); |
| struct hclge_dev *hdev = vport->back; |
| int duplex, speed; |
| int ret; |
| |
| /* When phy link down, do nothing */ |
| if (netdev->phydev->link == 0) |
| return; |
| |
| speed = netdev->phydev->speed; |
| duplex = netdev->phydev->duplex; |
| |
| ret = hclge_cfg_mac_speed_dup(hdev, speed, duplex, 0); |
| if (ret) |
| netdev_err(netdev, "failed to adjust link.\n"); |
| |
| ret = hclge_cfg_flowctrl(hdev); |
| if (ret) |
| netdev_err(netdev, "failed to configure flow control.\n"); |
| } |
| |
| int hclge_mac_connect_phy(struct hnae3_handle *handle) |
| { |
| struct hclge_vport *vport = hclge_get_vport(handle); |
| struct hclge_dev *hdev = vport->back; |
| struct net_device *netdev = hdev->vport[0].nic.netdev; |
| struct phy_device *phydev = hdev->hw.mac.phydev; |
| __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; |
| int ret; |
| |
| if (!phydev) |
| return 0; |
| |
| linkmode_clear_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported); |
| |
| phydev->dev_flags |= MARVELL_PHY_LED0_LINK_LED1_ACTIVE; |
| |
| ret = phy_connect_direct(netdev, phydev, |
| hclge_mac_adjust_link, |
| PHY_INTERFACE_MODE_SGMII); |
| if (ret) { |
| netdev_err(netdev, "phy_connect_direct err.\n"); |
| return ret; |
| } |
| |
| linkmode_copy(mask, hdev->hw.mac.supported); |
| linkmode_and(phydev->supported, phydev->supported, mask); |
| linkmode_copy(phydev->advertising, phydev->supported); |
| |
| /* supported flag is Pause and Asym Pause, but default advertising |
| * should be rx on, tx on, so need clear Asym Pause in advertising |
| * flag |
| */ |
| linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, |
| phydev->advertising); |
| |
| phy_attached_info(phydev); |
| |
| return 0; |
| } |
| |
| void hclge_mac_disconnect_phy(struct hnae3_handle *handle) |
| { |
| struct hclge_vport *vport = hclge_get_vport(handle); |
| struct hclge_dev *hdev = vport->back; |
| struct phy_device *phydev = hdev->hw.mac.phydev; |
| |
| if (!phydev) |
| return; |
| |
| phy_disconnect(phydev); |
| } |
| |
| void hclge_mac_start_phy(struct hclge_dev *hdev) |
| { |
| struct phy_device *phydev = hdev->hw.mac.phydev; |
| |
| if (!phydev) |
| return; |
| |
| phy_loopback(phydev, false); |
| |
| phy_start(phydev); |
| } |
| |
| void hclge_mac_stop_phy(struct hclge_dev *hdev) |
| { |
| struct net_device *netdev = hdev->vport[0].nic.netdev; |
| struct phy_device *phydev = netdev->phydev; |
| |
| if (!phydev) |
| return; |
| |
| phy_stop(phydev); |
| } |
| |
| u16 hclge_read_phy_reg(struct hclge_dev *hdev, u16 reg_addr) |
| { |
| struct hclge_phy_reg_cmd *req; |
| struct hclge_desc desc; |
| int ret; |
| |
| hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_PHY_REG, true); |
| |
| req = (struct hclge_phy_reg_cmd *)desc.data; |
| req->reg_addr = cpu_to_le16(reg_addr); |
| |
| ret = hclge_cmd_send(&hdev->hw, &desc, 1); |
| if (ret) |
| dev_err(&hdev->pdev->dev, |
| "failed to read phy reg, ret = %d.\n", ret); |
| |
| return le16_to_cpu(req->reg_val); |
| } |
| |
| int hclge_write_phy_reg(struct hclge_dev *hdev, u16 reg_addr, u16 val) |
| { |
| struct hclge_phy_reg_cmd *req; |
| struct hclge_desc desc; |
| int ret; |
| |
| hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_PHY_REG, false); |
| |
| req = (struct hclge_phy_reg_cmd *)desc.data; |
| req->reg_addr = cpu_to_le16(reg_addr); |
| req->reg_val = cpu_to_le16(val); |
| |
| ret = hclge_cmd_send(&hdev->hw, &desc, 1); |
| if (ret) |
| dev_err(&hdev->pdev->dev, |
| "failed to write phy reg, ret = %d.\n", ret); |
| |
| return ret; |
| } |