| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2020, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| #include <linux/usb/role.h> |
| #include <linux/usb/typec_mux.h> |
| |
| #define TYPEC_MISC_STATUS 0xb |
| #define CC_ATTACHED BIT(0) |
| #define CC_ORIENTATION BIT(1) |
| #define SNK_SRC_MODE BIT(6) |
| #define TYPEC_MODE_CFG 0x44 |
| #define TYPEC_DISABLE_CMD BIT(0) |
| #define EN_SNK_ONLY BIT(1) |
| #define EN_SRC_ONLY BIT(2) |
| #define TYPEC_VCONN_CONTROL 0x46 |
| #define VCONN_EN_SRC BIT(0) |
| #define VCONN_EN_VAL BIT(1) |
| #define TYPEC_EXIT_STATE_CFG 0x50 |
| #define SEL_SRC_UPPER_REF BIT(2) |
| #define TYPEC_INTR_EN_CFG_1 0x5e |
| #define TYPEC_INTR_EN_CFG_1_MASK GENMASK(7, 0) |
| |
| struct qcom_pmic_typec { |
| struct device *dev; |
| struct regmap *regmap; |
| u32 base; |
| |
| struct typec_port *port; |
| struct usb_role_switch *role_sw; |
| |
| struct regulator *vbus_reg; |
| bool vbus_enabled; |
| }; |
| |
| static void qcom_pmic_typec_enable_vbus_regulator(struct qcom_pmic_typec |
| *qcom_usb, bool enable) |
| { |
| int ret; |
| |
| if (enable == qcom_usb->vbus_enabled) |
| return; |
| |
| if (enable) { |
| ret = regulator_enable(qcom_usb->vbus_reg); |
| if (ret) |
| return; |
| } else { |
| ret = regulator_disable(qcom_usb->vbus_reg); |
| if (ret) |
| return; |
| } |
| qcom_usb->vbus_enabled = enable; |
| } |
| |
| static void qcom_pmic_typec_check_connection(struct qcom_pmic_typec *qcom_usb) |
| { |
| enum typec_orientation orientation; |
| enum usb_role role; |
| unsigned int stat; |
| bool enable_vbus; |
| |
| regmap_read(qcom_usb->regmap, qcom_usb->base + TYPEC_MISC_STATUS, |
| &stat); |
| |
| if (stat & CC_ATTACHED) { |
| orientation = (stat & CC_ORIENTATION) ? |
| TYPEC_ORIENTATION_REVERSE : |
| TYPEC_ORIENTATION_NORMAL; |
| typec_set_orientation(qcom_usb->port, orientation); |
| |
| role = (stat & SNK_SRC_MODE) ? USB_ROLE_HOST : USB_ROLE_DEVICE; |
| if (role == USB_ROLE_HOST) |
| enable_vbus = true; |
| else |
| enable_vbus = false; |
| } else { |
| role = USB_ROLE_NONE; |
| enable_vbus = false; |
| } |
| |
| qcom_pmic_typec_enable_vbus_regulator(qcom_usb, enable_vbus); |
| usb_role_switch_set_role(qcom_usb->role_sw, role); |
| } |
| |
| static irqreturn_t qcom_pmic_typec_interrupt(int irq, void *_qcom_usb) |
| { |
| struct qcom_pmic_typec *qcom_usb = _qcom_usb; |
| |
| qcom_pmic_typec_check_connection(qcom_usb); |
| return IRQ_HANDLED; |
| } |
| |
| static void qcom_pmic_typec_typec_hw_init(struct qcom_pmic_typec *qcom_usb, |
| enum typec_port_type type) |
| { |
| u8 mode = 0; |
| |
| regmap_update_bits(qcom_usb->regmap, |
| qcom_usb->base + TYPEC_INTR_EN_CFG_1, |
| TYPEC_INTR_EN_CFG_1_MASK, 0); |
| |
| if (type == TYPEC_PORT_SRC) |
| mode = EN_SRC_ONLY; |
| else if (type == TYPEC_PORT_SNK) |
| mode = EN_SNK_ONLY; |
| |
| regmap_update_bits(qcom_usb->regmap, qcom_usb->base + TYPEC_MODE_CFG, |
| EN_SNK_ONLY | EN_SRC_ONLY, mode); |
| |
| regmap_update_bits(qcom_usb->regmap, |
| qcom_usb->base + TYPEC_VCONN_CONTROL, |
| VCONN_EN_SRC | VCONN_EN_VAL, VCONN_EN_SRC); |
| regmap_update_bits(qcom_usb->regmap, |
| qcom_usb->base + TYPEC_EXIT_STATE_CFG, |
| SEL_SRC_UPPER_REF, SEL_SRC_UPPER_REF); |
| } |
| |
| static int qcom_pmic_typec_probe(struct platform_device *pdev) |
| { |
| struct qcom_pmic_typec *qcom_usb; |
| struct device *dev = &pdev->dev; |
| struct fwnode_handle *fwnode; |
| struct typec_capability cap; |
| const char *buf; |
| int ret, irq, role; |
| u32 reg; |
| |
| ret = device_property_read_u32(dev, "reg", ®); |
| if (ret < 0) { |
| dev_err(dev, "missing base address\n"); |
| return ret; |
| } |
| |
| qcom_usb = devm_kzalloc(dev, sizeof(*qcom_usb), GFP_KERNEL); |
| if (!qcom_usb) |
| return -ENOMEM; |
| |
| qcom_usb->dev = dev; |
| qcom_usb->base = reg; |
| |
| qcom_usb->regmap = dev_get_regmap(dev->parent, NULL); |
| if (!qcom_usb->regmap) { |
| dev_err(dev, "Failed to get regmap\n"); |
| return -EINVAL; |
| } |
| |
| qcom_usb->vbus_reg = devm_regulator_get(qcom_usb->dev, "usb_vbus"); |
| if (IS_ERR(qcom_usb->vbus_reg)) |
| return PTR_ERR(qcom_usb->vbus_reg); |
| |
| fwnode = device_get_named_child_node(dev, "connector"); |
| if (!fwnode) |
| return -EINVAL; |
| |
| ret = fwnode_property_read_string(fwnode, "power-role", &buf); |
| if (!ret) { |
| role = typec_find_port_power_role(buf); |
| if (role < 0) |
| role = TYPEC_PORT_SNK; |
| } else { |
| role = TYPEC_PORT_SNK; |
| } |
| cap.type = role; |
| |
| ret = fwnode_property_read_string(fwnode, "data-role", &buf); |
| if (!ret) { |
| role = typec_find_port_data_role(buf); |
| if (role < 0) |
| role = TYPEC_PORT_UFP; |
| } else { |
| role = TYPEC_PORT_UFP; |
| } |
| cap.data = role; |
| |
| cap.prefer_role = TYPEC_NO_PREFERRED_ROLE; |
| cap.fwnode = fwnode; |
| qcom_usb->port = typec_register_port(dev, &cap); |
| if (IS_ERR(qcom_usb->port)) { |
| ret = PTR_ERR(qcom_usb->port); |
| dev_err(dev, "Failed to register type c port %d\n", ret); |
| goto err_put_node; |
| } |
| fwnode_handle_put(fwnode); |
| |
| qcom_usb->role_sw = fwnode_usb_role_switch_get(dev_fwnode(qcom_usb->dev)); |
| if (IS_ERR(qcom_usb->role_sw)) { |
| ret = dev_err_probe(dev, PTR_ERR(qcom_usb->role_sw), |
| "failed to get role switch\n"); |
| goto err_typec_port; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| goto err_usb_role_sw; |
| |
| ret = devm_request_threaded_irq(qcom_usb->dev, irq, NULL, |
| qcom_pmic_typec_interrupt, IRQF_ONESHOT, |
| "qcom-pmic-typec", qcom_usb); |
| if (ret) { |
| dev_err(&pdev->dev, "Could not request IRQ\n"); |
| goto err_usb_role_sw; |
| } |
| |
| platform_set_drvdata(pdev, qcom_usb); |
| qcom_pmic_typec_typec_hw_init(qcom_usb, cap.type); |
| qcom_pmic_typec_check_connection(qcom_usb); |
| |
| return 0; |
| |
| err_usb_role_sw: |
| usb_role_switch_put(qcom_usb->role_sw); |
| err_typec_port: |
| typec_unregister_port(qcom_usb->port); |
| err_put_node: |
| fwnode_handle_put(fwnode); |
| |
| return ret; |
| } |
| |
| static int qcom_pmic_typec_remove(struct platform_device *pdev) |
| { |
| struct qcom_pmic_typec *qcom_usb = platform_get_drvdata(pdev); |
| |
| usb_role_switch_set_role(qcom_usb->role_sw, USB_ROLE_NONE); |
| qcom_pmic_typec_enable_vbus_regulator(qcom_usb, 0); |
| |
| typec_unregister_port(qcom_usb->port); |
| usb_role_switch_put(qcom_usb->role_sw); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id qcom_pmic_typec_table[] = { |
| { .compatible = "qcom,pm8150b-usb-typec" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, qcom_pmic_typec_table); |
| |
| static struct platform_driver qcom_pmic_typec = { |
| .driver = { |
| .name = "qcom,pmic-typec", |
| .of_match_table = qcom_pmic_typec_table, |
| }, |
| .probe = qcom_pmic_typec_probe, |
| .remove = qcom_pmic_typec_remove, |
| }; |
| module_platform_driver(qcom_pmic_typec); |
| |
| MODULE_DESCRIPTION("QCOM PMIC USB type C driver"); |
| MODULE_LICENSE("GPL v2"); |