| /* Altera Triple-Speed Ethernet MAC driver |
| * Copyright (C) 2008-2014 Altera Corporation. All rights reserved |
| * |
| * Contributors: |
| * Dalon Westergreen |
| * Thomas Chou |
| * Ian Abbott |
| * Yuriy Kozlov |
| * Tobias Klauser |
| * Andriy Smolskyy |
| * Roman Bulgakov |
| * Dmytro Mytarchuk |
| * Matthew Gerlach |
| * |
| * Original driver contributed by SLS. |
| * Major updates contributed by GlobalLogic |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/atomic.h> |
| #include <linux/delay.h> |
| #include <linux/etherdevice.h> |
| #include <linux/if_vlan.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mii.h> |
| #include <linux/netdevice.h> |
| #include <linux/of_device.h> |
| #include <linux/of_mdio.h> |
| #include <linux/of_net.h> |
| #include <linux/of_platform.h> |
| #include <linux/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/skbuff.h> |
| #include <asm/cacheflush.h> |
| |
| #include "altera_utils.h" |
| #include "altera_tse.h" |
| #include "altera_sgdma.h" |
| #include "altera_msgdma.h" |
| |
| static atomic_t instance_count = ATOMIC_INIT(~0); |
| /* Module parameters */ |
| static int debug = -1; |
| module_param(debug, int, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(debug, "Message Level (-1: default, 0: no output, 16: all)"); |
| |
| static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE | |
| NETIF_MSG_LINK | NETIF_MSG_IFUP | |
| NETIF_MSG_IFDOWN); |
| |
| #define RX_DESCRIPTORS 64 |
| static int dma_rx_num = RX_DESCRIPTORS; |
| module_param(dma_rx_num, int, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(dma_rx_num, "Number of descriptors in the RX list"); |
| |
| #define TX_DESCRIPTORS 64 |
| static int dma_tx_num = TX_DESCRIPTORS; |
| module_param(dma_tx_num, int, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(dma_tx_num, "Number of descriptors in the TX list"); |
| |
| |
| #define POLL_PHY (-1) |
| |
| /* Make sure DMA buffer size is larger than the max frame size |
| * plus some alignment offset and a VLAN header. If the max frame size is |
| * 1518, a VLAN header would be additional 4 bytes and additional |
| * headroom for alignment is 2 bytes, 2048 is just fine. |
| */ |
| #define ALTERA_RXDMABUFFER_SIZE 2048 |
| |
| /* Allow network stack to resume queueing packets after we've |
| * finished transmitting at least 1/4 of the packets in the queue. |
| */ |
| #define TSE_TX_THRESH(x) (x->tx_ring_size / 4) |
| |
| #define TXQUEUESTOP_THRESHHOLD 2 |
| |
| static const struct of_device_id altera_tse_ids[]; |
| |
| static inline u32 tse_tx_avail(struct altera_tse_private *priv) |
| { |
| return priv->tx_cons + priv->tx_ring_size - priv->tx_prod - 1; |
| } |
| |
| /* PCS Register read/write functions |
| */ |
| static u16 sgmii_pcs_read(struct altera_tse_private *priv, int regnum) |
| { |
| return csrrd32(priv->mac_dev, |
| tse_csroffs(mdio_phy0) + regnum * 4) & 0xffff; |
| } |
| |
| static void sgmii_pcs_write(struct altera_tse_private *priv, int regnum, |
| u16 value) |
| { |
| csrwr32(value, priv->mac_dev, tse_csroffs(mdio_phy0) + regnum * 4); |
| } |
| |
| /* Check PCS scratch memory */ |
| static int sgmii_pcs_scratch_test(struct altera_tse_private *priv, u16 value) |
| { |
| sgmii_pcs_write(priv, SGMII_PCS_SCRATCH, value); |
| return (sgmii_pcs_read(priv, SGMII_PCS_SCRATCH) == value); |
| } |
| |
| /* MDIO specific functions |
| */ |
| static int altera_tse_mdio_read(struct mii_bus *bus, int mii_id, int regnum) |
| { |
| struct net_device *ndev = bus->priv; |
| struct altera_tse_private *priv = netdev_priv(ndev); |
| |
| /* set MDIO address */ |
| csrwr32((mii_id & 0x1f), priv->mac_dev, |
| tse_csroffs(mdio_phy1_addr)); |
| |
| /* get the data */ |
| return csrrd32(priv->mac_dev, |
| tse_csroffs(mdio_phy1) + regnum * 4) & 0xffff; |
| } |
| |
| static int altera_tse_mdio_write(struct mii_bus *bus, int mii_id, int regnum, |
| u16 value) |
| { |
| struct net_device *ndev = bus->priv; |
| struct altera_tse_private *priv = netdev_priv(ndev); |
| |
| /* set MDIO address */ |
| csrwr32((mii_id & 0x1f), priv->mac_dev, |
| tse_csroffs(mdio_phy1_addr)); |
| |
| /* write the data */ |
| csrwr32(value, priv->mac_dev, tse_csroffs(mdio_phy1) + regnum * 4); |
| return 0; |
| } |
| |
| static int altera_tse_mdio_create(struct net_device *dev, unsigned int id) |
| { |
| struct altera_tse_private *priv = netdev_priv(dev); |
| int ret; |
| struct device_node *mdio_node = NULL; |
| struct mii_bus *mdio = NULL; |
| struct device_node *child_node = NULL; |
| |
| for_each_child_of_node(priv->device->of_node, child_node) { |
| if (of_device_is_compatible(child_node, "altr,tse-mdio")) { |
| mdio_node = child_node; |
| break; |
| } |
| } |
| |
| if (mdio_node) { |
| netdev_dbg(dev, "FOUND MDIO subnode\n"); |
| } else { |
| netdev_dbg(dev, "NO MDIO subnode\n"); |
| return 0; |
| } |
| |
| mdio = mdiobus_alloc(); |
| if (mdio == NULL) { |
| netdev_err(dev, "Error allocating MDIO bus\n"); |
| return -ENOMEM; |
| } |
| |
| mdio->name = ALTERA_TSE_RESOURCE_NAME; |
| mdio->read = &altera_tse_mdio_read; |
| mdio->write = &altera_tse_mdio_write; |
| snprintf(mdio->id, MII_BUS_ID_SIZE, "%s-%u", mdio->name, id); |
| |
| mdio->priv = dev; |
| mdio->parent = priv->device; |
| |
| ret = of_mdiobus_register(mdio, mdio_node); |
| if (ret != 0) { |
| netdev_err(dev, "Cannot register MDIO bus %s\n", |
| mdio->id); |
| goto out_free_mdio; |
| } |
| |
| if (netif_msg_drv(priv)) |
| netdev_info(dev, "MDIO bus %s: created\n", mdio->id); |
| |
| priv->mdio = mdio; |
| return 0; |
| out_free_mdio: |
| mdiobus_free(mdio); |
| mdio = NULL; |
| return ret; |
| } |
| |
| static void altera_tse_mdio_destroy(struct net_device *dev) |
| { |
| struct altera_tse_private *priv = netdev_priv(dev); |
| |
| if (priv->mdio == NULL) |
| return; |
| |
| if (netif_msg_drv(priv)) |
| netdev_info(dev, "MDIO bus %s: removed\n", |
| priv->mdio->id); |
| |
| mdiobus_unregister(priv->mdio); |
| mdiobus_free(priv->mdio); |
| priv->mdio = NULL; |
| } |
| |
| static int tse_init_rx_buffer(struct altera_tse_private *priv, |
| struct tse_buffer *rxbuffer, int len) |
| { |
| rxbuffer->skb = netdev_alloc_skb_ip_align(priv->dev, len); |
| if (!rxbuffer->skb) |
| return -ENOMEM; |
| |
| rxbuffer->dma_addr = dma_map_single(priv->device, rxbuffer->skb->data, |
| len, |
| DMA_FROM_DEVICE); |
| |
| if (dma_mapping_error(priv->device, rxbuffer->dma_addr)) { |
| netdev_err(priv->dev, "%s: DMA mapping error\n", __func__); |
| dev_kfree_skb_any(rxbuffer->skb); |
| return -EINVAL; |
| } |
| rxbuffer->dma_addr &= (dma_addr_t)~3; |
| rxbuffer->len = len; |
| return 0; |
| } |
| |
| static void tse_free_rx_buffer(struct altera_tse_private *priv, |
| struct tse_buffer *rxbuffer) |
| { |
| struct sk_buff *skb = rxbuffer->skb; |
| dma_addr_t dma_addr = rxbuffer->dma_addr; |
| |
| if (skb != NULL) { |
| if (dma_addr) |
| dma_unmap_single(priv->device, dma_addr, |
| rxbuffer->len, |
| DMA_FROM_DEVICE); |
| dev_kfree_skb_any(skb); |
| rxbuffer->skb = NULL; |
| rxbuffer->dma_addr = 0; |
| } |
| } |
| |
| /* Unmap and free Tx buffer resources |
| */ |
| static void tse_free_tx_buffer(struct altera_tse_private *priv, |
| struct tse_buffer *buffer) |
| { |
| if (buffer->dma_addr) { |
| if (buffer->mapped_as_page) |
| dma_unmap_page(priv->device, buffer->dma_addr, |
| buffer->len, DMA_TO_DEVICE); |
| else |
| dma_unmap_single(priv->device, buffer->dma_addr, |
| buffer->len, DMA_TO_DEVICE); |
| buffer->dma_addr = 0; |
| } |
| if (buffer->skb) { |
| dev_kfree_skb_any(buffer->skb); |
| buffer->skb = NULL; |
| } |
| } |
| |
| static int alloc_init_skbufs(struct altera_tse_private *priv) |
| { |
| unsigned int rx_descs = priv->rx_ring_size; |
| unsigned int tx_descs = priv->tx_ring_size; |
| int ret = -ENOMEM; |
| int i; |
| |
| /* Create Rx ring buffer */ |
| priv->rx_ring = kcalloc(rx_descs, sizeof(struct tse_buffer), |
| GFP_KERNEL); |
| if (!priv->rx_ring) |
| goto err_rx_ring; |
| |
| /* Create Tx ring buffer */ |
| priv->tx_ring = kcalloc(tx_descs, sizeof(struct tse_buffer), |
| GFP_KERNEL); |
| if (!priv->tx_ring) |
| goto err_tx_ring; |
| |
| priv->tx_cons = 0; |
| priv->tx_prod = 0; |
| |
| /* Init Rx ring */ |
| for (i = 0; i < rx_descs; i++) { |
| ret = tse_init_rx_buffer(priv, &priv->rx_ring[i], |
| priv->rx_dma_buf_sz); |
| if (ret) |
| goto err_init_rx_buffers; |
| } |
| |
| priv->rx_cons = 0; |
| priv->rx_prod = 0; |
| |
| return 0; |
| err_init_rx_buffers: |
| while (--i >= 0) |
| tse_free_rx_buffer(priv, &priv->rx_ring[i]); |
| kfree(priv->tx_ring); |
| err_tx_ring: |
| kfree(priv->rx_ring); |
| err_rx_ring: |
| return ret; |
| } |
| |
| static void free_skbufs(struct net_device *dev) |
| { |
| struct altera_tse_private *priv = netdev_priv(dev); |
| unsigned int rx_descs = priv->rx_ring_size; |
| unsigned int tx_descs = priv->tx_ring_size; |
| int i; |
| |
| /* Release the DMA TX/RX socket buffers */ |
| for (i = 0; i < rx_descs; i++) |
| tse_free_rx_buffer(priv, &priv->rx_ring[i]); |
| for (i = 0; i < tx_descs; i++) |
| tse_free_tx_buffer(priv, &priv->tx_ring[i]); |
| |
| |
| kfree(priv->tx_ring); |
| } |
| |
| /* Reallocate the skb for the reception process |
| */ |
| static inline void tse_rx_refill(struct altera_tse_private *priv) |
| { |
| unsigned int rxsize = priv->rx_ring_size; |
| unsigned int entry; |
| int ret; |
| |
| for (; priv->rx_cons - priv->rx_prod > 0; |
| priv->rx_prod++) { |
| entry = priv->rx_prod % rxsize; |
| if (likely(priv->rx_ring[entry].skb == NULL)) { |
| ret = tse_init_rx_buffer(priv, &priv->rx_ring[entry], |
| priv->rx_dma_buf_sz); |
| if (unlikely(ret != 0)) |
| break; |
| priv->dmaops->add_rx_desc(priv, &priv->rx_ring[entry]); |
| } |
| } |
| } |
| |
| /* Pull out the VLAN tag and fix up the packet |
| */ |
| static inline void tse_rx_vlan(struct net_device *dev, struct sk_buff *skb) |
| { |
| struct ethhdr *eth_hdr; |
| u16 vid; |
| if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) && |
| !__vlan_get_tag(skb, &vid)) { |
| eth_hdr = (struct ethhdr *)skb->data; |
| memmove(skb->data + VLAN_HLEN, eth_hdr, ETH_ALEN * 2); |
| skb_pull(skb, VLAN_HLEN); |
| __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid); |
| } |
| } |
| |
| /* Receive a packet: retrieve and pass over to upper levels |
| */ |
| static int tse_rx(struct altera_tse_private *priv, int limit) |
| { |
| unsigned int count = 0; |
| unsigned int next_entry; |
| struct sk_buff *skb; |
| unsigned int entry = priv->rx_cons % priv->rx_ring_size; |
| u32 rxstatus; |
| u16 pktlength; |
| u16 pktstatus; |
| |
| /* Check for count < limit first as get_rx_status is changing |
| * the response-fifo so we must process the next packet |
| * after calling get_rx_status if a response is pending. |
| * (reading the last byte of the response pops the value from the fifo.) |
| */ |
| while ((count < limit) && |
| ((rxstatus = priv->dmaops->get_rx_status(priv)) != 0)) { |
| pktstatus = rxstatus >> 16; |
| pktlength = rxstatus & 0xffff; |
| |
| if ((pktstatus & 0xFF) || (pktlength == 0)) |
| netdev_err(priv->dev, |
| "RCV pktstatus %08X pktlength %08X\n", |
| pktstatus, pktlength); |
| |
| /* DMA trasfer from TSE starts with 2 aditional bytes for |
| * IP payload alignment. Status returned by get_rx_status() |
| * contains DMA transfer length. Packet is 2 bytes shorter. |
| */ |
| pktlength -= 2; |
| |
| count++; |
| next_entry = (++priv->rx_cons) % priv->rx_ring_size; |
| |
| skb = priv->rx_ring[entry].skb; |
| if (unlikely(!skb)) { |
| netdev_err(priv->dev, |
| "%s: Inconsistent Rx descriptor chain\n", |
| __func__); |
| priv->dev->stats.rx_dropped++; |
| break; |
| } |
| priv->rx_ring[entry].skb = NULL; |
| |
| skb_put(skb, pktlength); |
| |
| dma_unmap_single(priv->device, priv->rx_ring[entry].dma_addr, |
| priv->rx_ring[entry].len, DMA_FROM_DEVICE); |
| |
| if (netif_msg_pktdata(priv)) { |
| netdev_info(priv->dev, "frame received %d bytes\n", |
| pktlength); |
| print_hex_dump(KERN_ERR, "data: ", DUMP_PREFIX_OFFSET, |
| 16, 1, skb->data, pktlength, true); |
| } |
| |
| tse_rx_vlan(priv->dev, skb); |
| |
| skb->protocol = eth_type_trans(skb, priv->dev); |
| skb_checksum_none_assert(skb); |
| |
| napi_gro_receive(&priv->napi, skb); |
| |
| priv->dev->stats.rx_packets++; |
| priv->dev->stats.rx_bytes += pktlength; |
| |
| entry = next_entry; |
| |
| tse_rx_refill(priv); |
| } |
| |
| return count; |
| } |
| |
| /* Reclaim resources after transmission completes |
| */ |
| static int tse_tx_complete(struct altera_tse_private *priv) |
| { |
| unsigned int txsize = priv->tx_ring_size; |
| u32 ready; |
| unsigned int entry; |
| struct tse_buffer *tx_buff; |
| int txcomplete = 0; |
| |
| spin_lock(&priv->tx_lock); |
| |
| ready = priv->dmaops->tx_completions(priv); |
| |
| /* Free sent buffers */ |
| while (ready && (priv->tx_cons != priv->tx_prod)) { |
| entry = priv->tx_cons % txsize; |
| tx_buff = &priv->tx_ring[entry]; |
| |
| if (netif_msg_tx_done(priv)) |
| netdev_dbg(priv->dev, "%s: curr %d, dirty %d\n", |
| __func__, priv->tx_prod, priv->tx_cons); |
| |
| if (likely(tx_buff->skb)) |
| priv->dev->stats.tx_packets++; |
| |
| tse_free_tx_buffer(priv, tx_buff); |
| priv->tx_cons++; |
| |
| txcomplete++; |
| ready--; |
| } |
| |
| if (unlikely(netif_queue_stopped(priv->dev) && |
| tse_tx_avail(priv) > TSE_TX_THRESH(priv))) { |
| if (netif_queue_stopped(priv->dev) && |
| tse_tx_avail(priv) > TSE_TX_THRESH(priv)) { |
| if (netif_msg_tx_done(priv)) |
| netdev_dbg(priv->dev, "%s: restart transmit\n", |
| __func__); |
| netif_wake_queue(priv->dev); |
| } |
| } |
| |
| spin_unlock(&priv->tx_lock); |
| return txcomplete; |
| } |
| |
| /* NAPI polling function |
| */ |
| static int tse_poll(struct napi_struct *napi, int budget) |
| { |
| struct altera_tse_private *priv = |
| container_of(napi, struct altera_tse_private, napi); |
| int rxcomplete = 0; |
| unsigned long int flags; |
| |
| tse_tx_complete(priv); |
| |
| rxcomplete = tse_rx(priv, budget); |
| |
| if (rxcomplete < budget) { |
| |
| napi_complete(napi); |
| |
| netdev_dbg(priv->dev, |
| "NAPI Complete, did %d packets with budget %d\n", |
| rxcomplete, budget); |
| |
| spin_lock_irqsave(&priv->rxdma_irq_lock, flags); |
| priv->dmaops->enable_rxirq(priv); |
| priv->dmaops->enable_txirq(priv); |
| spin_unlock_irqrestore(&priv->rxdma_irq_lock, flags); |
| } |
| return rxcomplete; |
| } |
| |
| /* DMA TX & RX FIFO interrupt routing |
| */ |
| static irqreturn_t altera_isr(int irq, void *dev_id) |
| { |
| struct net_device *dev = dev_id; |
| struct altera_tse_private *priv; |
| |
| if (unlikely(!dev)) { |
| pr_err("%s: invalid dev pointer\n", __func__); |
| return IRQ_NONE; |
| } |
| priv = netdev_priv(dev); |
| |
| spin_lock(&priv->rxdma_irq_lock); |
| /* reset IRQs */ |
| priv->dmaops->clear_rxirq(priv); |
| priv->dmaops->clear_txirq(priv); |
| spin_unlock(&priv->rxdma_irq_lock); |
| |
| if (likely(napi_schedule_prep(&priv->napi))) { |
| spin_lock(&priv->rxdma_irq_lock); |
| priv->dmaops->disable_rxirq(priv); |
| priv->dmaops->disable_txirq(priv); |
| spin_unlock(&priv->rxdma_irq_lock); |
| __napi_schedule(&priv->napi); |
| } |
| |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* Transmit a packet (called by the kernel). Dispatches |
| * either the SGDMA method for transmitting or the |
| * MSGDMA method, assumes no scatter/gather support, |
| * implying an assumption that there's only one |
| * physically contiguous fragment starting at |
| * skb->data, for length of skb_headlen(skb). |
| */ |
| static int tse_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct altera_tse_private *priv = netdev_priv(dev); |
| unsigned int txsize = priv->tx_ring_size; |
| unsigned int entry; |
| struct tse_buffer *buffer = NULL; |
| int nfrags = skb_shinfo(skb)->nr_frags; |
| unsigned int nopaged_len = skb_headlen(skb); |
| enum netdev_tx ret = NETDEV_TX_OK; |
| dma_addr_t dma_addr; |
| |
| spin_lock_bh(&priv->tx_lock); |
| |
| if (unlikely(tse_tx_avail(priv) < nfrags + 1)) { |
| if (!netif_queue_stopped(dev)) { |
| netif_stop_queue(dev); |
| /* This is a hard error, log it. */ |
| netdev_err(priv->dev, |
| "%s: Tx list full when queue awake\n", |
| __func__); |
| } |
| ret = NETDEV_TX_BUSY; |
| goto out; |
| } |
| |
| /* Map the first skb fragment */ |
| entry = priv->tx_prod % txsize; |
| buffer = &priv->tx_ring[entry]; |
| |
| dma_addr = dma_map_single(priv->device, skb->data, nopaged_len, |
| DMA_TO_DEVICE); |
| if (dma_mapping_error(priv->device, dma_addr)) { |
| netdev_err(priv->dev, "%s: DMA mapping error\n", __func__); |
| ret = NETDEV_TX_OK; |
| goto out; |
| } |
| |
| buffer->skb = skb; |
| buffer->dma_addr = dma_addr; |
| buffer->len = nopaged_len; |
| |
| priv->dmaops->tx_buffer(priv, buffer); |
| |
| skb_tx_timestamp(skb); |
| |
| priv->tx_prod++; |
| dev->stats.tx_bytes += skb->len; |
| |
| if (unlikely(tse_tx_avail(priv) <= TXQUEUESTOP_THRESHHOLD)) { |
| if (netif_msg_hw(priv)) |
| netdev_dbg(priv->dev, "%s: stop transmitted packets\n", |
| __func__); |
| netif_stop_queue(dev); |
| } |
| |
| out: |
| spin_unlock_bh(&priv->tx_lock); |
| |
| return ret; |
| } |
| |
| /* Called every time the controller might need to be made |
| * aware of new link state. The PHY code conveys this |
| * information through variables in the phydev structure, and this |
| * function converts those variables into the appropriate |
| * register values, and can bring down the device if needed. |
| */ |
| static void altera_tse_adjust_link(struct net_device *dev) |
| { |
| struct altera_tse_private *priv = netdev_priv(dev); |
| struct phy_device *phydev = dev->phydev; |
| int new_state = 0; |
| |
| /* only change config if there is a link */ |
| spin_lock(&priv->mac_cfg_lock); |
| if (phydev->link) { |
| /* Read old config */ |
| u32 cfg_reg = ioread32(&priv->mac_dev->command_config); |
| |
| /* Check duplex */ |
| if (phydev->duplex != priv->oldduplex) { |
| new_state = 1; |
| if (!(phydev->duplex)) |
| cfg_reg |= MAC_CMDCFG_HD_ENA; |
| else |
| cfg_reg &= ~MAC_CMDCFG_HD_ENA; |
| |
| netdev_dbg(priv->dev, "%s: Link duplex = 0x%x\n", |
| dev->name, phydev->duplex); |
| |
| priv->oldduplex = phydev->duplex; |
| } |
| |
| /* Check speed */ |
| if (phydev->speed != priv->oldspeed) { |
| new_state = 1; |
| switch (phydev->speed) { |
| case 1000: |
| cfg_reg |= MAC_CMDCFG_ETH_SPEED; |
| cfg_reg &= ~MAC_CMDCFG_ENA_10; |
| break; |
| case 100: |
| cfg_reg &= ~MAC_CMDCFG_ETH_SPEED; |
| cfg_reg &= ~MAC_CMDCFG_ENA_10; |
| break; |
| case 10: |
| cfg_reg &= ~MAC_CMDCFG_ETH_SPEED; |
| cfg_reg |= MAC_CMDCFG_ENA_10; |
| break; |
| default: |
| if (netif_msg_link(priv)) |
| netdev_warn(dev, "Speed (%d) is not 10/100/1000!\n", |
| phydev->speed); |
| break; |
| } |
| priv->oldspeed = phydev->speed; |
| } |
| iowrite32(cfg_reg, &priv->mac_dev->command_config); |
| |
| if (!priv->oldlink) { |
| new_state = 1; |
| priv->oldlink = 1; |
| } |
| } else if (priv->oldlink) { |
| new_state = 1; |
| priv->oldlink = 0; |
| priv->oldspeed = 0; |
| priv->oldduplex = -1; |
| } |
| |
| if (new_state && netif_msg_link(priv)) |
| phy_print_status(phydev); |
| |
| spin_unlock(&priv->mac_cfg_lock); |
| } |
| static struct phy_device *connect_local_phy(struct net_device *dev) |
| { |
| struct altera_tse_private *priv = netdev_priv(dev); |
| struct phy_device *phydev = NULL; |
| char phy_id_fmt[MII_BUS_ID_SIZE + 3]; |
| |
| if (priv->phy_addr != POLL_PHY) { |
| snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, |
| priv->mdio->id, priv->phy_addr); |
| |
| netdev_dbg(dev, "trying to attach to %s\n", phy_id_fmt); |
| |
| phydev = phy_connect(dev, phy_id_fmt, &altera_tse_adjust_link, |
| priv->phy_iface); |
| if (IS_ERR(phydev)) |
| netdev_err(dev, "Could not attach to PHY\n"); |
| |
| } else { |
| int ret; |
| phydev = phy_find_first(priv->mdio); |
| if (phydev == NULL) { |
| netdev_err(dev, "No PHY found\n"); |
| return phydev; |
| } |
| |
| ret = phy_connect_direct(dev, phydev, &altera_tse_adjust_link, |
| priv->phy_iface); |
| if (ret != 0) { |
| netdev_err(dev, "Could not attach to PHY\n"); |
| phydev = NULL; |
| } |
| } |
| return phydev; |
| } |
| |
| static int altera_tse_phy_get_addr_mdio_create(struct net_device *dev) |
| { |
| struct altera_tse_private *priv = netdev_priv(dev); |
| struct device_node *np = priv->device->of_node; |
| int ret = 0; |
| |
| priv->phy_iface = of_get_phy_mode(np); |
| |
| /* Avoid get phy addr and create mdio if no phy is present */ |
| if (!priv->phy_iface) |
| return 0; |
| |
| /* try to get PHY address from device tree, use PHY autodetection if |
| * no valid address is given |
| */ |
| |
| if (of_property_read_u32(priv->device->of_node, "phy-addr", |
| &priv->phy_addr)) { |
| priv->phy_addr = POLL_PHY; |
| } |
| |
| if (!((priv->phy_addr == POLL_PHY) || |
| ((priv->phy_addr >= 0) && (priv->phy_addr < PHY_MAX_ADDR)))) { |
| netdev_err(dev, "invalid phy-addr specified %d\n", |
| priv->phy_addr); |
| return -ENODEV; |
| } |
| |
| /* Create/attach to MDIO bus */ |
| ret = altera_tse_mdio_create(dev, |
| atomic_add_return(1, &instance_count)); |
| |
| if (ret) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| /* Initialize driver's PHY state, and attach to the PHY |
| */ |
| static int init_phy(struct net_device *dev) |
| { |
| struct altera_tse_private *priv = netdev_priv(dev); |
| struct phy_device *phydev; |
| struct device_node *phynode; |
| bool fixed_link = false; |
| int rc = 0; |
| |
| /* Avoid init phy in case of no phy present */ |
| if (!priv->phy_iface) |
| return 0; |
| |
| priv->oldlink = 0; |
| priv->oldspeed = 0; |
| priv->oldduplex = -1; |
| |
| phynode = of_parse_phandle(priv->device->of_node, "phy-handle", 0); |
| |
| if (!phynode) { |
| /* check if a fixed-link is defined in device-tree */ |
| if (of_phy_is_fixed_link(priv->device->of_node)) { |
| rc = of_phy_register_fixed_link(priv->device->of_node); |
| if (rc < 0) { |
| netdev_err(dev, "cannot register fixed PHY\n"); |
| return rc; |
| } |
| |
| /* In the case of a fixed PHY, the DT node associated |
| * to the PHY is the Ethernet MAC DT node. |
| */ |
| phynode = of_node_get(priv->device->of_node); |
| fixed_link = true; |
| |
| netdev_dbg(dev, "fixed-link detected\n"); |
| phydev = of_phy_connect(dev, phynode, |
| &altera_tse_adjust_link, |
| 0, priv->phy_iface); |
| } else { |
| netdev_dbg(dev, "no phy-handle found\n"); |
| if (!priv->mdio) { |
| netdev_err(dev, "No phy-handle nor local mdio specified\n"); |
| return -ENODEV; |
| } |
| phydev = connect_local_phy(dev); |
| } |
| } else { |
| netdev_dbg(dev, "phy-handle found\n"); |
| phydev = of_phy_connect(dev, phynode, |
| &altera_tse_adjust_link, 0, priv->phy_iface); |
| } |
| of_node_put(phynode); |
| |
| if (!phydev) { |
| netdev_err(dev, "Could not find the PHY\n"); |
| if (fixed_link) |
| of_phy_deregister_fixed_link(priv->device->of_node); |
| return -ENODEV; |
| } |
| |
| /* Stop Advertising 1000BASE Capability if interface is not GMII |
| * Note: Checkpatch throws CHECKs for the camel case defines below, |
| * it's ok to ignore. |
| */ |
| if ((priv->phy_iface == PHY_INTERFACE_MODE_MII) || |
| (priv->phy_iface == PHY_INTERFACE_MODE_RMII)) |
| phydev->advertising &= ~(SUPPORTED_1000baseT_Half | |
| SUPPORTED_1000baseT_Full); |
| |
| /* Broken HW is sometimes missing the pull-up resistor on the |
| * MDIO line, which results in reads to non-existent devices returning |
| * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent |
| * device as well. If a fixed-link is used the phy_id is always 0. |
| * Note: phydev->phy_id is the result of reading the UID PHY registers. |
| */ |
| if ((phydev->phy_id == 0) && !fixed_link) { |
| netdev_err(dev, "Bad PHY UID 0x%08x\n", phydev->phy_id); |
| phy_disconnect(phydev); |
| return -ENODEV; |
| } |
| |
| netdev_dbg(dev, "attached to PHY %d UID 0x%08x Link = %d\n", |
| phydev->mdio.addr, phydev->phy_id, phydev->link); |
| |
| return 0; |
| } |
| |
| static void tse_update_mac_addr(struct altera_tse_private *priv, u8 *addr) |
| { |
| u32 msb; |
| u32 lsb; |
| |
| msb = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0]; |
| lsb = ((addr[5] << 8) | addr[4]) & 0xffff; |
| |
| /* Set primary MAC address */ |
| csrwr32(msb, priv->mac_dev, tse_csroffs(mac_addr_0)); |
| csrwr32(lsb, priv->mac_dev, tse_csroffs(mac_addr_1)); |
| } |
| |
| /* MAC software reset. |
| * When reset is triggered, the MAC function completes the current |
| * transmission or reception, and subsequently disables the transmit and |
| * receive logic, flushes the receive FIFO buffer, and resets the statistics |
| * counters. |
| */ |
| static int reset_mac(struct altera_tse_private *priv) |
| { |
| int counter; |
| u32 dat; |
| |
| dat = csrrd32(priv->mac_dev, tse_csroffs(command_config)); |
| dat &= ~(MAC_CMDCFG_TX_ENA | MAC_CMDCFG_RX_ENA); |
| dat |= MAC_CMDCFG_SW_RESET | MAC_CMDCFG_CNT_RESET; |
| csrwr32(dat, priv->mac_dev, tse_csroffs(command_config)); |
| |
| counter = 0; |
| while (counter++ < ALTERA_TSE_SW_RESET_WATCHDOG_CNTR) { |
| if (tse_bit_is_clear(priv->mac_dev, tse_csroffs(command_config), |
| MAC_CMDCFG_SW_RESET)) |
| break; |
| udelay(1); |
| } |
| |
| if (counter >= ALTERA_TSE_SW_RESET_WATCHDOG_CNTR) { |
| dat = csrrd32(priv->mac_dev, tse_csroffs(command_config)); |
| dat &= ~MAC_CMDCFG_SW_RESET; |
| csrwr32(dat, priv->mac_dev, tse_csroffs(command_config)); |
| return -1; |
| } |
| return 0; |
| } |
| |
| /* Initialize MAC core registers |
| */ |
| static int init_mac(struct altera_tse_private *priv) |
| { |
| unsigned int cmd = 0; |
| u32 frm_length; |
| |
| /* Setup Rx FIFO */ |
| csrwr32(priv->rx_fifo_depth - ALTERA_TSE_RX_SECTION_EMPTY, |
| priv->mac_dev, tse_csroffs(rx_section_empty)); |
| |
| csrwr32(ALTERA_TSE_RX_SECTION_FULL, priv->mac_dev, |
| tse_csroffs(rx_section_full)); |
| |
| csrwr32(ALTERA_TSE_RX_ALMOST_EMPTY, priv->mac_dev, |
| tse_csroffs(rx_almost_empty)); |
| |
| csrwr32(ALTERA_TSE_RX_ALMOST_FULL, priv->mac_dev, |
| tse_csroffs(rx_almost_full)); |
| |
| /* Setup Tx FIFO */ |
| csrwr32(priv->tx_fifo_depth - ALTERA_TSE_TX_SECTION_EMPTY, |
| priv->mac_dev, tse_csroffs(tx_section_empty)); |
| |
| csrwr32(ALTERA_TSE_TX_SECTION_FULL, priv->mac_dev, |
| tse_csroffs(tx_section_full)); |
| |
| csrwr32(ALTERA_TSE_TX_ALMOST_EMPTY, priv->mac_dev, |
| tse_csroffs(tx_almost_empty)); |
| |
| csrwr32(ALTERA_TSE_TX_ALMOST_FULL, priv->mac_dev, |
| tse_csroffs(tx_almost_full)); |
| |
| /* MAC Address Configuration */ |
| tse_update_mac_addr(priv, priv->dev->dev_addr); |
| |
| /* MAC Function Configuration */ |
| frm_length = ETH_HLEN + priv->dev->mtu + ETH_FCS_LEN; |
| csrwr32(frm_length, priv->mac_dev, tse_csroffs(frm_length)); |
| |
| csrwr32(ALTERA_TSE_TX_IPG_LENGTH, priv->mac_dev, |
| tse_csroffs(tx_ipg_length)); |
| |
| /* Disable RX/TX shift 16 for alignment of all received frames on 16-bit |
| * start address |
| */ |
| tse_set_bit(priv->mac_dev, tse_csroffs(rx_cmd_stat), |
| ALTERA_TSE_RX_CMD_STAT_RX_SHIFT16); |
| |
| tse_clear_bit(priv->mac_dev, tse_csroffs(tx_cmd_stat), |
| ALTERA_TSE_TX_CMD_STAT_TX_SHIFT16 | |
| ALTERA_TSE_TX_CMD_STAT_OMIT_CRC); |
| |
| /* Set the MAC options */ |
| cmd = csrrd32(priv->mac_dev, tse_csroffs(command_config)); |
| cmd &= ~MAC_CMDCFG_PAD_EN; /* No padding Removal on Receive */ |
| cmd &= ~MAC_CMDCFG_CRC_FWD; /* CRC Removal */ |
| cmd |= MAC_CMDCFG_RX_ERR_DISC; /* Automatically discard frames |
| * with CRC errors |
| */ |
| cmd |= MAC_CMDCFG_CNTL_FRM_ENA; |
| cmd &= ~MAC_CMDCFG_TX_ENA; |
| cmd &= ~MAC_CMDCFG_RX_ENA; |
| |
| /* Default speed and duplex setting, full/100 */ |
| cmd &= ~MAC_CMDCFG_HD_ENA; |
| cmd &= ~MAC_CMDCFG_ETH_SPEED; |
| cmd &= ~MAC_CMDCFG_ENA_10; |
| |
| csrwr32(cmd, priv->mac_dev, tse_csroffs(command_config)); |
| |
| csrwr32(ALTERA_TSE_PAUSE_QUANTA, priv->mac_dev, |
| tse_csroffs(pause_quanta)); |
| |
| if (netif_msg_hw(priv)) |
| dev_dbg(priv->device, |
| "MAC post-initialization: CMD_CONFIG = 0x%08x\n", cmd); |
| |
| return 0; |
| } |
| |
| /* Start/stop MAC transmission logic |
| */ |
| static void tse_set_mac(struct altera_tse_private *priv, bool enable) |
| { |
| u32 value = csrrd32(priv->mac_dev, tse_csroffs(command_config)); |
| |
| if (enable) |
| value |= MAC_CMDCFG_TX_ENA | MAC_CMDCFG_RX_ENA; |
| else |
| value &= ~(MAC_CMDCFG_TX_ENA | MAC_CMDCFG_RX_ENA); |
| |
| csrwr32(value, priv->mac_dev, tse_csroffs(command_config)); |
| } |
| |
| /* Change the MTU |
| */ |
| static int tse_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| if (netif_running(dev)) { |
| netdev_err(dev, "must be stopped to change its MTU\n"); |
| return -EBUSY; |
| } |
| |
| dev->mtu = new_mtu; |
| netdev_update_features(dev); |
| |
| return 0; |
| } |
| |
| static void altera_tse_set_mcfilter(struct net_device *dev) |
| { |
| struct altera_tse_private *priv = netdev_priv(dev); |
| int i; |
| struct netdev_hw_addr *ha; |
| |
| /* clear the hash filter */ |
| for (i = 0; i < 64; i++) |
| csrwr32(0, priv->mac_dev, tse_csroffs(hash_table) + i * 4); |
| |
| netdev_for_each_mc_addr(ha, dev) { |
| unsigned int hash = 0; |
| int mac_octet; |
| |
| for (mac_octet = 5; mac_octet >= 0; mac_octet--) { |
| unsigned char xor_bit = 0; |
| unsigned char octet = ha->addr[mac_octet]; |
| unsigned int bitshift; |
| |
| for (bitshift = 0; bitshift < 8; bitshift++) |
| xor_bit ^= ((octet >> bitshift) & 0x01); |
| |
| hash = (hash << 1) | xor_bit; |
| } |
| csrwr32(1, priv->mac_dev, tse_csroffs(hash_table) + hash * 4); |
| } |
| } |
| |
| |
| static void altera_tse_set_mcfilterall(struct net_device *dev) |
| { |
| struct altera_tse_private *priv = netdev_priv(dev); |
| int i; |
| |
| /* set the hash filter */ |
| for (i = 0; i < 64; i++) |
| csrwr32(1, priv->mac_dev, tse_csroffs(hash_table) + i * 4); |
| } |
| |
| /* Set or clear the multicast filter for this adaptor |
| */ |
| static void tse_set_rx_mode_hashfilter(struct net_device *dev) |
| { |
| struct altera_tse_private *priv = netdev_priv(dev); |
| |
| spin_lock(&priv->mac_cfg_lock); |
| |
| if (dev->flags & IFF_PROMISC) |
| tse_set_bit(priv->mac_dev, tse_csroffs(command_config), |
| MAC_CMDCFG_PROMIS_EN); |
| |
| if (dev->flags & IFF_ALLMULTI) |
| altera_tse_set_mcfilterall(dev); |
| else |
| altera_tse_set_mcfilter(dev); |
| |
| spin_unlock(&priv->mac_cfg_lock); |
| } |
| |
| /* Set or clear the multicast filter for this adaptor |
| */ |
| static void tse_set_rx_mode(struct net_device *dev) |
| { |
| struct altera_tse_private *priv = netdev_priv(dev); |
| |
| spin_lock(&priv->mac_cfg_lock); |
| |
| if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) || |
| !netdev_mc_empty(dev) || !netdev_uc_empty(dev)) |
| tse_set_bit(priv->mac_dev, tse_csroffs(command_config), |
| MAC_CMDCFG_PROMIS_EN); |
| else |
| tse_clear_bit(priv->mac_dev, tse_csroffs(command_config), |
| MAC_CMDCFG_PROMIS_EN); |
| |
| spin_unlock(&priv->mac_cfg_lock); |
| } |
| |
| /* Initialise (if necessary) the SGMII PCS component |
| */ |
| static int init_sgmii_pcs(struct net_device *dev) |
| { |
| struct altera_tse_private *priv = netdev_priv(dev); |
| int n; |
| unsigned int tmp_reg = 0; |
| |
| if (priv->phy_iface != PHY_INTERFACE_MODE_SGMII) |
| return 0; /* Nothing to do, not in SGMII mode */ |
| |
| /* The TSE SGMII PCS block looks a little like a PHY, it is |
| * mapped into the zeroth MDIO space of the MAC and it has |
| * ID registers like a PHY would. Sadly this is often |
| * configured to zeroes, so don't be surprised if it does |
| * show 0x00000000. |
| */ |
| |
| if (sgmii_pcs_scratch_test(priv, 0x0000) && |
| sgmii_pcs_scratch_test(priv, 0xffff) && |
| sgmii_pcs_scratch_test(priv, 0xa5a5) && |
| sgmii_pcs_scratch_test(priv, 0x5a5a)) { |
| netdev_info(dev, "PCS PHY ID: 0x%04x%04x\n", |
| sgmii_pcs_read(priv, MII_PHYSID1), |
| sgmii_pcs_read(priv, MII_PHYSID2)); |
| } else { |
| netdev_err(dev, "SGMII PCS Scratch memory test failed.\n"); |
| return -ENOMEM; |
| } |
| |
| /* Starting on page 5-29 of the MegaCore Function User Guide |
| * Set SGMII Link timer to 1.6ms |
| */ |
| sgmii_pcs_write(priv, SGMII_PCS_LINK_TIMER_0, 0x0D40); |
| sgmii_pcs_write(priv, SGMII_PCS_LINK_TIMER_1, 0x03); |
| |
| /* Enable SGMII Interface and Enable SGMII Auto Negotiation */ |
| sgmii_pcs_write(priv, SGMII_PCS_IF_MODE, 0x3); |
| |
| /* Enable Autonegotiation */ |
| tmp_reg = sgmii_pcs_read(priv, MII_BMCR); |
| tmp_reg |= (BMCR_SPEED1000 | BMCR_FULLDPLX | BMCR_ANENABLE); |
| sgmii_pcs_write(priv, MII_BMCR, tmp_reg); |
| |
| /* Reset PCS block */ |
| tmp_reg |= BMCR_RESET; |
| sgmii_pcs_write(priv, MII_BMCR, tmp_reg); |
| for (n = 0; n < SGMII_PCS_SW_RESET_TIMEOUT; n++) { |
| if (!(sgmii_pcs_read(priv, MII_BMCR) & BMCR_RESET)) { |
| netdev_info(dev, "SGMII PCS block initialised OK\n"); |
| return 0; |
| } |
| udelay(1); |
| } |
| |
| /* We failed to reset the block, return a timeout */ |
| netdev_err(dev, "SGMII PCS block reset failed.\n"); |
| return -ETIMEDOUT; |
| } |
| |
| /* Open and initialize the interface |
| */ |
| static int tse_open(struct net_device *dev) |
| { |
| struct altera_tse_private *priv = netdev_priv(dev); |
| int ret = 0; |
| int i; |
| unsigned long int flags; |
| |
| /* Reset and configure TSE MAC and probe associated PHY */ |
| ret = priv->dmaops->init_dma(priv); |
| if (ret != 0) { |
| netdev_err(dev, "Cannot initialize DMA\n"); |
| goto phy_error; |
| } |
| |
| if (netif_msg_ifup(priv)) |
| netdev_warn(dev, "device MAC address %pM\n", |
| dev->dev_addr); |
| |
| if ((priv->revision < 0xd00) || (priv->revision > 0xe00)) |
| netdev_warn(dev, "TSE revision %x\n", priv->revision); |
| |
| spin_lock(&priv->mac_cfg_lock); |
| /* no-op if MAC not operating in SGMII mode*/ |
| ret = init_sgmii_pcs(dev); |
| if (ret) { |
| netdev_err(dev, |
| "Cannot init the SGMII PCS (error: %d)\n", ret); |
| spin_unlock(&priv->mac_cfg_lock); |
| goto phy_error; |
| } |
| |
| ret = reset_mac(priv); |
| /* Note that reset_mac will fail if the clocks are gated by the PHY |
| * due to the PHY being put into isolation or power down mode. |
| * This is not an error if reset fails due to no clock. |
| */ |
| if (ret) |
| netdev_dbg(dev, "Cannot reset MAC core (error: %d)\n", ret); |
| |
| ret = init_mac(priv); |
| spin_unlock(&priv->mac_cfg_lock); |
| if (ret) { |
| netdev_err(dev, "Cannot init MAC core (error: %d)\n", ret); |
| goto alloc_skbuf_error; |
| } |
| |
| priv->dmaops->reset_dma(priv); |
| |
| /* Create and initialize the TX/RX descriptors chains. */ |
| priv->rx_ring_size = dma_rx_num; |
| priv->tx_ring_size = dma_tx_num; |
| ret = alloc_init_skbufs(priv); |
| if (ret) { |
| netdev_err(dev, "DMA descriptors initialization failed\n"); |
| goto alloc_skbuf_error; |
| } |
| |
| |
| /* Register RX interrupt */ |
| ret = request_irq(priv->rx_irq, altera_isr, IRQF_SHARED, |
| dev->name, dev); |
| if (ret) { |
| netdev_err(dev, "Unable to register RX interrupt %d\n", |
| priv->rx_irq); |
| goto init_error; |
| } |
| |
| /* Register TX interrupt */ |
| ret = request_irq(priv->tx_irq, altera_isr, IRQF_SHARED, |
| dev->name, dev); |
| if (ret) { |
| netdev_err(dev, "Unable to register TX interrupt %d\n", |
| priv->tx_irq); |
| goto tx_request_irq_error; |
| } |
| |
| /* Enable DMA interrupts */ |
| spin_lock_irqsave(&priv->rxdma_irq_lock, flags); |
| priv->dmaops->enable_rxirq(priv); |
| priv->dmaops->enable_txirq(priv); |
| |
| /* Setup RX descriptor chain */ |
| for (i = 0; i < priv->rx_ring_size; i++) |
| priv->dmaops->add_rx_desc(priv, &priv->rx_ring[i]); |
| |
| spin_unlock_irqrestore(&priv->rxdma_irq_lock, flags); |
| |
| if (dev->phydev) |
| phy_start(dev->phydev); |
| |
| napi_enable(&priv->napi); |
| netif_start_queue(dev); |
| |
| priv->dmaops->start_rxdma(priv); |
| |
| /* Start MAC Rx/Tx */ |
| spin_lock(&priv->mac_cfg_lock); |
| tse_set_mac(priv, true); |
| spin_unlock(&priv->mac_cfg_lock); |
| |
| return 0; |
| |
| tx_request_irq_error: |
| free_irq(priv->rx_irq, dev); |
| init_error: |
| free_skbufs(dev); |
| alloc_skbuf_error: |
| phy_error: |
| return ret; |
| } |
| |
| /* Stop TSE MAC interface and put the device in an inactive state |
| */ |
| static int tse_shutdown(struct net_device *dev) |
| { |
| struct altera_tse_private *priv = netdev_priv(dev); |
| int ret; |
| unsigned long int flags; |
| |
| /* Stop the PHY */ |
| if (dev->phydev) |
| phy_stop(dev->phydev); |
| |
| netif_stop_queue(dev); |
| napi_disable(&priv->napi); |
| |
| /* Disable DMA interrupts */ |
| spin_lock_irqsave(&priv->rxdma_irq_lock, flags); |
| priv->dmaops->disable_rxirq(priv); |
| priv->dmaops->disable_txirq(priv); |
| spin_unlock_irqrestore(&priv->rxdma_irq_lock, flags); |
| |
| /* Free the IRQ lines */ |
| free_irq(priv->rx_irq, dev); |
| free_irq(priv->tx_irq, dev); |
| |
| /* disable and reset the MAC, empties fifo */ |
| spin_lock(&priv->mac_cfg_lock); |
| spin_lock(&priv->tx_lock); |
| |
| ret = reset_mac(priv); |
| /* Note that reset_mac will fail if the clocks are gated by the PHY |
| * due to the PHY being put into isolation or power down mode. |
| * This is not an error if reset fails due to no clock. |
| */ |
| if (ret) |
| netdev_dbg(dev, "Cannot reset MAC core (error: %d)\n", ret); |
| priv->dmaops->reset_dma(priv); |
| free_skbufs(dev); |
| |
| spin_unlock(&priv->tx_lock); |
| spin_unlock(&priv->mac_cfg_lock); |
| |
| priv->dmaops->uninit_dma(priv); |
| |
| return 0; |
| } |
| |
| static struct net_device_ops altera_tse_netdev_ops = { |
| .ndo_open = tse_open, |
| .ndo_stop = tse_shutdown, |
| .ndo_start_xmit = tse_start_xmit, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_set_rx_mode = tse_set_rx_mode, |
| .ndo_change_mtu = tse_change_mtu, |
| .ndo_validate_addr = eth_validate_addr, |
| }; |
| |
| static int request_and_map(struct platform_device *pdev, const char *name, |
| struct resource **res, void __iomem **ptr) |
| { |
| struct resource *region; |
| struct device *device = &pdev->dev; |
| |
| *res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name); |
| if (*res == NULL) { |
| dev_err(device, "resource %s not defined\n", name); |
| return -ENODEV; |
| } |
| |
| region = devm_request_mem_region(device, (*res)->start, |
| resource_size(*res), dev_name(device)); |
| if (region == NULL) { |
| dev_err(device, "unable to request %s\n", name); |
| return -EBUSY; |
| } |
| |
| *ptr = devm_ioremap_nocache(device, region->start, |
| resource_size(region)); |
| if (*ptr == NULL) { |
| dev_err(device, "ioremap_nocache of %s failed!", name); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| /* Probe Altera TSE MAC device |
| */ |
| static int altera_tse_probe(struct platform_device *pdev) |
| { |
| struct net_device *ndev; |
| int ret = -ENODEV; |
| struct resource *control_port; |
| struct resource *dma_res; |
| struct altera_tse_private *priv; |
| const unsigned char *macaddr; |
| void __iomem *descmap; |
| const struct of_device_id *of_id = NULL; |
| |
| ndev = alloc_etherdev(sizeof(struct altera_tse_private)); |
| if (!ndev) { |
| dev_err(&pdev->dev, "Could not allocate network device\n"); |
| return -ENODEV; |
| } |
| |
| SET_NETDEV_DEV(ndev, &pdev->dev); |
| |
| priv = netdev_priv(ndev); |
| priv->device = &pdev->dev; |
| priv->dev = ndev; |
| priv->msg_enable = netif_msg_init(debug, default_msg_level); |
| |
| of_id = of_match_device(altera_tse_ids, &pdev->dev); |
| |
| if (of_id) |
| priv->dmaops = (struct altera_dmaops *)of_id->data; |
| |
| |
| if (priv->dmaops && |
| priv->dmaops->altera_dtype == ALTERA_DTYPE_SGDMA) { |
| /* Get the mapped address to the SGDMA descriptor memory */ |
| ret = request_and_map(pdev, "s1", &dma_res, &descmap); |
| if (ret) |
| goto err_free_netdev; |
| |
| /* Start of that memory is for transmit descriptors */ |
| priv->tx_dma_desc = descmap; |
| |
| /* First half is for tx descriptors, other half for tx */ |
| priv->txdescmem = resource_size(dma_res)/2; |
| |
| priv->txdescmem_busaddr = (dma_addr_t)dma_res->start; |
| |
| priv->rx_dma_desc = (void __iomem *)((uintptr_t)(descmap + |
| priv->txdescmem)); |
| priv->rxdescmem = resource_size(dma_res)/2; |
| priv->rxdescmem_busaddr = dma_res->start; |
| priv->rxdescmem_busaddr += priv->txdescmem; |
| |
| if (upper_32_bits(priv->rxdescmem_busaddr)) { |
| dev_dbg(priv->device, |
| "SGDMA bus addresses greater than 32-bits\n"); |
| ret = -EINVAL; |
| goto err_free_netdev; |
| } |
| if (upper_32_bits(priv->txdescmem_busaddr)) { |
| dev_dbg(priv->device, |
| "SGDMA bus addresses greater than 32-bits\n"); |
| ret = -EINVAL; |
| goto err_free_netdev; |
| } |
| } else if (priv->dmaops && |
| priv->dmaops->altera_dtype == ALTERA_DTYPE_MSGDMA) { |
| ret = request_and_map(pdev, "rx_resp", &dma_res, |
| &priv->rx_dma_resp); |
| if (ret) |
| goto err_free_netdev; |
| |
| ret = request_and_map(pdev, "tx_desc", &dma_res, |
| &priv->tx_dma_desc); |
| if (ret) |
| goto err_free_netdev; |
| |
| priv->txdescmem = resource_size(dma_res); |
| priv->txdescmem_busaddr = dma_res->start; |
| |
| ret = request_and_map(pdev, "rx_desc", &dma_res, |
| &priv->rx_dma_desc); |
| if (ret) |
| goto err_free_netdev; |
| |
| priv->rxdescmem = resource_size(dma_res); |
| priv->rxdescmem_busaddr = dma_res->start; |
| |
| } else { |
| goto err_free_netdev; |
| } |
| |
| if (!dma_set_mask(priv->device, DMA_BIT_MASK(priv->dmaops->dmamask))) |
| dma_set_coherent_mask(priv->device, |
| DMA_BIT_MASK(priv->dmaops->dmamask)); |
| else if (!dma_set_mask(priv->device, DMA_BIT_MASK(32))) |
| dma_set_coherent_mask(priv->device, DMA_BIT_MASK(32)); |
| else |
| goto err_free_netdev; |
| |
| /* MAC address space */ |
| ret = request_and_map(pdev, "control_port", &control_port, |
| (void __iomem **)&priv->mac_dev); |
| if (ret) |
| goto err_free_netdev; |
| |
| /* xSGDMA Rx Dispatcher address space */ |
| ret = request_and_map(pdev, "rx_csr", &dma_res, |
| &priv->rx_dma_csr); |
| if (ret) |
| goto err_free_netdev; |
| |
| |
| /* xSGDMA Tx Dispatcher address space */ |
| ret = request_and_map(pdev, "tx_csr", &dma_res, |
| &priv->tx_dma_csr); |
| if (ret) |
| goto err_free_netdev; |
| |
| |
| /* Rx IRQ */ |
| priv->rx_irq = platform_get_irq_byname(pdev, "rx_irq"); |
| if (priv->rx_irq == -ENXIO) { |
| dev_err(&pdev->dev, "cannot obtain Rx IRQ\n"); |
| ret = -ENXIO; |
| goto err_free_netdev; |
| } |
| |
| /* Tx IRQ */ |
| priv->tx_irq = platform_get_irq_byname(pdev, "tx_irq"); |
| if (priv->tx_irq == -ENXIO) { |
| dev_err(&pdev->dev, "cannot obtain Tx IRQ\n"); |
| ret = -ENXIO; |
| goto err_free_netdev; |
| } |
| |
| /* get FIFO depths from device tree */ |
| if (of_property_read_u32(pdev->dev.of_node, "rx-fifo-depth", |
| &priv->rx_fifo_depth)) { |
| dev_err(&pdev->dev, "cannot obtain rx-fifo-depth\n"); |
| ret = -ENXIO; |
| goto err_free_netdev; |
| } |
| |
| if (of_property_read_u32(pdev->dev.of_node, "tx-fifo-depth", |
| &priv->tx_fifo_depth)) { |
| dev_err(&pdev->dev, "cannot obtain tx-fifo-depth\n"); |
| ret = -ENXIO; |
| goto err_free_netdev; |
| } |
| |
| /* get hash filter settings for this instance */ |
| priv->hash_filter = |
| of_property_read_bool(pdev->dev.of_node, |
| "altr,has-hash-multicast-filter"); |
| |
| /* Set hash filter to not set for now until the |
| * multicast filter receive issue is debugged |
| */ |
| priv->hash_filter = 0; |
| |
| /* get supplemental address settings for this instance */ |
| priv->added_unicast = |
| of_property_read_bool(pdev->dev.of_node, |
| "altr,has-supplementary-unicast"); |
| |
| priv->dev->min_mtu = ETH_ZLEN + ETH_FCS_LEN; |
| /* Max MTU is 1500, ETH_DATA_LEN */ |
| priv->dev->max_mtu = ETH_DATA_LEN; |
| |
| /* Get the max mtu from the device tree. Note that the |
| * "max-frame-size" parameter is actually max mtu. Definition |
| * in the ePAPR v1.1 spec and usage differ, so go with usage. |
| */ |
| of_property_read_u32(pdev->dev.of_node, "max-frame-size", |
| &priv->dev->max_mtu); |
| |
| /* The DMA buffer size already accounts for an alignment bias |
| * to avoid unaligned access exceptions for the NIOS processor, |
| */ |
| priv->rx_dma_buf_sz = ALTERA_RXDMABUFFER_SIZE; |
| |
| /* get default MAC address from device tree */ |
| macaddr = of_get_mac_address(pdev->dev.of_node); |
| if (macaddr) |
| ether_addr_copy(ndev->dev_addr, macaddr); |
| else |
| eth_hw_addr_random(ndev); |
| |
| /* get phy addr and create mdio */ |
| ret = altera_tse_phy_get_addr_mdio_create(ndev); |
| |
| if (ret) |
| goto err_free_netdev; |
| |
| /* initialize netdev */ |
| ndev->mem_start = control_port->start; |
| ndev->mem_end = control_port->end; |
| ndev->netdev_ops = &altera_tse_netdev_ops; |
| altera_tse_set_ethtool_ops(ndev); |
| |
| altera_tse_netdev_ops.ndo_set_rx_mode = tse_set_rx_mode; |
| |
| if (priv->hash_filter) |
| altera_tse_netdev_ops.ndo_set_rx_mode = |
| tse_set_rx_mode_hashfilter; |
| |
| /* Scatter/gather IO is not supported, |
| * so it is turned off |
| */ |
| ndev->hw_features &= ~NETIF_F_SG; |
| ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA; |
| |
| /* VLAN offloading of tagging, stripping and filtering is not |
| * supported by hardware, but driver will accommodate the |
| * extra 4-byte VLAN tag for processing by upper layers |
| */ |
| ndev->features |= NETIF_F_HW_VLAN_CTAG_RX; |
| |
| /* setup NAPI interface */ |
| netif_napi_add(ndev, &priv->napi, tse_poll, NAPI_POLL_WEIGHT); |
| |
| spin_lock_init(&priv->mac_cfg_lock); |
| spin_lock_init(&priv->tx_lock); |
| spin_lock_init(&priv->rxdma_irq_lock); |
| |
| netif_carrier_off(ndev); |
| ret = register_netdev(ndev); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to register TSE net device\n"); |
| goto err_register_netdev; |
| } |
| |
| platform_set_drvdata(pdev, ndev); |
| |
| priv->revision = ioread32(&priv->mac_dev->megacore_revision); |
| |
| if (netif_msg_probe(priv)) |
| dev_info(&pdev->dev, "Altera TSE MAC version %d.%d at 0x%08lx irq %d/%d\n", |
| (priv->revision >> 8) & 0xff, |
| priv->revision & 0xff, |
| (unsigned long) control_port->start, priv->rx_irq, |
| priv->tx_irq); |
| |
| ret = init_phy(ndev); |
| if (ret != 0) { |
| netdev_err(ndev, "Cannot attach to PHY (error: %d)\n", ret); |
| goto err_init_phy; |
| } |
| return 0; |
| |
| err_init_phy: |
| unregister_netdev(ndev); |
| err_register_netdev: |
| netif_napi_del(&priv->napi); |
| altera_tse_mdio_destroy(ndev); |
| err_free_netdev: |
| free_netdev(ndev); |
| return ret; |
| } |
| |
| /* Remove Altera TSE MAC device |
| */ |
| static int altera_tse_remove(struct platform_device *pdev) |
| { |
| struct net_device *ndev = platform_get_drvdata(pdev); |
| struct altera_tse_private *priv = netdev_priv(ndev); |
| |
| if (ndev->phydev) { |
| phy_disconnect(ndev->phydev); |
| |
| if (of_phy_is_fixed_link(priv->device->of_node)) |
| of_phy_deregister_fixed_link(priv->device->of_node); |
| } |
| |
| platform_set_drvdata(pdev, NULL); |
| altera_tse_mdio_destroy(ndev); |
| unregister_netdev(ndev); |
| free_netdev(ndev); |
| |
| return 0; |
| } |
| |
| static const struct altera_dmaops altera_dtype_sgdma = { |
| .altera_dtype = ALTERA_DTYPE_SGDMA, |
| .dmamask = 32, |
| .reset_dma = sgdma_reset, |
| .enable_txirq = sgdma_enable_txirq, |
| .enable_rxirq = sgdma_enable_rxirq, |
| .disable_txirq = sgdma_disable_txirq, |
| .disable_rxirq = sgdma_disable_rxirq, |
| .clear_txirq = sgdma_clear_txirq, |
| .clear_rxirq = sgdma_clear_rxirq, |
| .tx_buffer = sgdma_tx_buffer, |
| .tx_completions = sgdma_tx_completions, |
| .add_rx_desc = sgdma_add_rx_desc, |
| .get_rx_status = sgdma_rx_status, |
| .init_dma = sgdma_initialize, |
| .uninit_dma = sgdma_uninitialize, |
| .start_rxdma = sgdma_start_rxdma, |
| }; |
| |
| static const struct altera_dmaops altera_dtype_msgdma = { |
| .altera_dtype = ALTERA_DTYPE_MSGDMA, |
| .dmamask = 64, |
| .reset_dma = msgdma_reset, |
| .enable_txirq = msgdma_enable_txirq, |
| .enable_rxirq = msgdma_enable_rxirq, |
| .disable_txirq = msgdma_disable_txirq, |
| .disable_rxirq = msgdma_disable_rxirq, |
| .clear_txirq = msgdma_clear_txirq, |
| .clear_rxirq = msgdma_clear_rxirq, |
| .tx_buffer = msgdma_tx_buffer, |
| .tx_completions = msgdma_tx_completions, |
| .add_rx_desc = msgdma_add_rx_desc, |
| .get_rx_status = msgdma_rx_status, |
| .init_dma = msgdma_initialize, |
| .uninit_dma = msgdma_uninitialize, |
| .start_rxdma = msgdma_start_rxdma, |
| }; |
| |
| static const struct of_device_id altera_tse_ids[] = { |
| { .compatible = "altr,tse-msgdma-1.0", .data = &altera_dtype_msgdma, }, |
| { .compatible = "altr,tse-1.0", .data = &altera_dtype_sgdma, }, |
| { .compatible = "ALTR,tse-1.0", .data = &altera_dtype_sgdma, }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, altera_tse_ids); |
| |
| static struct platform_driver altera_tse_driver = { |
| .probe = altera_tse_probe, |
| .remove = altera_tse_remove, |
| .suspend = NULL, |
| .resume = NULL, |
| .driver = { |
| .name = ALTERA_TSE_RESOURCE_NAME, |
| .of_match_table = altera_tse_ids, |
| }, |
| }; |
| |
| module_platform_driver(altera_tse_driver); |
| |
| MODULE_AUTHOR("Altera Corporation"); |
| MODULE_DESCRIPTION("Altera Triple Speed Ethernet MAC driver"); |
| MODULE_LICENSE("GPL v2"); |