| /* |
| * QLogic iSCSI HBA Driver |
| * Copyright (c) 2011-2013 QLogic Corporation |
| * |
| * See LICENSE.qla4xxx for copyright and licensing details. |
| */ |
| |
| #include "ql4_def.h" |
| #include "ql4_glbl.h" |
| #include "ql4_bsg.h" |
| |
| static int |
| qla4xxx_read_flash(struct bsg_job *bsg_job) |
| { |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| struct scsi_qla_host *ha = to_qla_host(host); |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| uint32_t offset = 0; |
| uint32_t length = 0; |
| dma_addr_t flash_dma; |
| uint8_t *flash = NULL; |
| int rval = -EINVAL; |
| |
| bsg_reply->reply_payload_rcv_len = 0; |
| |
| if (unlikely(pci_channel_offline(ha->pdev))) |
| goto leave; |
| |
| if (ql4xxx_reset_active(ha)) { |
| ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); |
| rval = -EBUSY; |
| goto leave; |
| } |
| |
| if (ha->flash_state != QLFLASH_WAITING) { |
| ql4_printk(KERN_ERR, ha, "%s: another flash operation " |
| "active\n", __func__); |
| rval = -EBUSY; |
| goto leave; |
| } |
| |
| ha->flash_state = QLFLASH_READING; |
| offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; |
| length = bsg_job->reply_payload.payload_len; |
| |
| flash = dma_alloc_coherent(&ha->pdev->dev, length, &flash_dma, |
| GFP_KERNEL); |
| if (!flash) { |
| ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash " |
| "data\n", __func__); |
| rval = -ENOMEM; |
| goto leave; |
| } |
| |
| rval = qla4xxx_get_flash(ha, flash_dma, offset, length); |
| if (rval) { |
| ql4_printk(KERN_ERR, ha, "%s: get flash failed\n", __func__); |
| bsg_reply->result = DID_ERROR << 16; |
| rval = -EIO; |
| } else { |
| bsg_reply->reply_payload_rcv_len = |
| sg_copy_from_buffer(bsg_job->reply_payload.sg_list, |
| bsg_job->reply_payload.sg_cnt, |
| flash, length); |
| bsg_reply->result = DID_OK << 16; |
| } |
| |
| bsg_job_done(bsg_job, bsg_reply->result, |
| bsg_reply->reply_payload_rcv_len); |
| dma_free_coherent(&ha->pdev->dev, length, flash, flash_dma); |
| leave: |
| ha->flash_state = QLFLASH_WAITING; |
| return rval; |
| } |
| |
| static int |
| qla4xxx_update_flash(struct bsg_job *bsg_job) |
| { |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| struct scsi_qla_host *ha = to_qla_host(host); |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| uint32_t length = 0; |
| uint32_t offset = 0; |
| uint32_t options = 0; |
| dma_addr_t flash_dma; |
| uint8_t *flash = NULL; |
| int rval = -EINVAL; |
| |
| bsg_reply->reply_payload_rcv_len = 0; |
| |
| if (unlikely(pci_channel_offline(ha->pdev))) |
| goto leave; |
| |
| if (ql4xxx_reset_active(ha)) { |
| ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); |
| rval = -EBUSY; |
| goto leave; |
| } |
| |
| if (ha->flash_state != QLFLASH_WAITING) { |
| ql4_printk(KERN_ERR, ha, "%s: another flash operation " |
| "active\n", __func__); |
| rval = -EBUSY; |
| goto leave; |
| } |
| |
| ha->flash_state = QLFLASH_WRITING; |
| length = bsg_job->request_payload.payload_len; |
| offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; |
| options = bsg_req->rqst_data.h_vendor.vendor_cmd[2]; |
| |
| flash = dma_alloc_coherent(&ha->pdev->dev, length, &flash_dma, |
| GFP_KERNEL); |
| if (!flash) { |
| ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash " |
| "data\n", __func__); |
| rval = -ENOMEM; |
| goto leave; |
| } |
| |
| sg_copy_to_buffer(bsg_job->request_payload.sg_list, |
| bsg_job->request_payload.sg_cnt, flash, length); |
| |
| rval = qla4xxx_set_flash(ha, flash_dma, offset, length, options); |
| if (rval) { |
| ql4_printk(KERN_ERR, ha, "%s: set flash failed\n", __func__); |
| bsg_reply->result = DID_ERROR << 16; |
| rval = -EIO; |
| } else |
| bsg_reply->result = DID_OK << 16; |
| |
| bsg_job_done(bsg_job, bsg_reply->result, |
| bsg_reply->reply_payload_rcv_len); |
| dma_free_coherent(&ha->pdev->dev, length, flash, flash_dma); |
| leave: |
| ha->flash_state = QLFLASH_WAITING; |
| return rval; |
| } |
| |
| static int |
| qla4xxx_get_acb_state(struct bsg_job *bsg_job) |
| { |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| struct scsi_qla_host *ha = to_qla_host(host); |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| uint32_t status[MBOX_REG_COUNT]; |
| uint32_t acb_idx; |
| uint32_t ip_idx; |
| int rval = -EINVAL; |
| |
| bsg_reply->reply_payload_rcv_len = 0; |
| |
| if (unlikely(pci_channel_offline(ha->pdev))) |
| goto leave; |
| |
| /* Only 4022 and above adapters are supported */ |
| if (is_qla4010(ha)) |
| goto leave; |
| |
| if (ql4xxx_reset_active(ha)) { |
| ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); |
| rval = -EBUSY; |
| goto leave; |
| } |
| |
| if (bsg_job->reply_payload.payload_len < sizeof(status)) { |
| ql4_printk(KERN_ERR, ha, "%s: invalid payload len %d\n", |
| __func__, bsg_job->reply_payload.payload_len); |
| rval = -EINVAL; |
| goto leave; |
| } |
| |
| acb_idx = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; |
| ip_idx = bsg_req->rqst_data.h_vendor.vendor_cmd[2]; |
| |
| rval = qla4xxx_get_ip_state(ha, acb_idx, ip_idx, status); |
| if (rval) { |
| ql4_printk(KERN_ERR, ha, "%s: get ip state failed\n", |
| __func__); |
| bsg_reply->result = DID_ERROR << 16; |
| rval = -EIO; |
| } else { |
| bsg_reply->reply_payload_rcv_len = |
| sg_copy_from_buffer(bsg_job->reply_payload.sg_list, |
| bsg_job->reply_payload.sg_cnt, |
| status, sizeof(status)); |
| bsg_reply->result = DID_OK << 16; |
| } |
| |
| bsg_job_done(bsg_job, bsg_reply->result, |
| bsg_reply->reply_payload_rcv_len); |
| leave: |
| return rval; |
| } |
| |
| static int |
| qla4xxx_read_nvram(struct bsg_job *bsg_job) |
| { |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| struct scsi_qla_host *ha = to_qla_host(host); |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| uint32_t offset = 0; |
| uint32_t len = 0; |
| uint32_t total_len = 0; |
| dma_addr_t nvram_dma; |
| uint8_t *nvram = NULL; |
| int rval = -EINVAL; |
| |
| bsg_reply->reply_payload_rcv_len = 0; |
| |
| if (unlikely(pci_channel_offline(ha->pdev))) |
| goto leave; |
| |
| /* Only 40xx adapters are supported */ |
| if (!(is_qla4010(ha) || is_qla4022(ha) || is_qla4032(ha))) |
| goto leave; |
| |
| if (ql4xxx_reset_active(ha)) { |
| ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); |
| rval = -EBUSY; |
| goto leave; |
| } |
| |
| offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; |
| len = bsg_job->reply_payload.payload_len; |
| total_len = offset + len; |
| |
| /* total len should not be greater than max NVRAM size */ |
| if ((is_qla4010(ha) && total_len > QL4010_NVRAM_SIZE) || |
| ((is_qla4022(ha) || is_qla4032(ha)) && |
| total_len > QL40X2_NVRAM_SIZE)) { |
| ql4_printk(KERN_ERR, ha, "%s: offset+len greater than max" |
| " nvram size, offset=%d len=%d\n", |
| __func__, offset, len); |
| goto leave; |
| } |
| |
| nvram = dma_alloc_coherent(&ha->pdev->dev, len, &nvram_dma, |
| GFP_KERNEL); |
| if (!nvram) { |
| ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for nvram " |
| "data\n", __func__); |
| rval = -ENOMEM; |
| goto leave; |
| } |
| |
| rval = qla4xxx_get_nvram(ha, nvram_dma, offset, len); |
| if (rval) { |
| ql4_printk(KERN_ERR, ha, "%s: get nvram failed\n", __func__); |
| bsg_reply->result = DID_ERROR << 16; |
| rval = -EIO; |
| } else { |
| bsg_reply->reply_payload_rcv_len = |
| sg_copy_from_buffer(bsg_job->reply_payload.sg_list, |
| bsg_job->reply_payload.sg_cnt, |
| nvram, len); |
| bsg_reply->result = DID_OK << 16; |
| } |
| |
| bsg_job_done(bsg_job, bsg_reply->result, |
| bsg_reply->reply_payload_rcv_len); |
| dma_free_coherent(&ha->pdev->dev, len, nvram, nvram_dma); |
| leave: |
| return rval; |
| } |
| |
| static int |
| qla4xxx_update_nvram(struct bsg_job *bsg_job) |
| { |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| struct scsi_qla_host *ha = to_qla_host(host); |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| uint32_t offset = 0; |
| uint32_t len = 0; |
| uint32_t total_len = 0; |
| dma_addr_t nvram_dma; |
| uint8_t *nvram = NULL; |
| int rval = -EINVAL; |
| |
| bsg_reply->reply_payload_rcv_len = 0; |
| |
| if (unlikely(pci_channel_offline(ha->pdev))) |
| goto leave; |
| |
| if (!(is_qla4010(ha) || is_qla4022(ha) || is_qla4032(ha))) |
| goto leave; |
| |
| if (ql4xxx_reset_active(ha)) { |
| ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); |
| rval = -EBUSY; |
| goto leave; |
| } |
| |
| offset = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; |
| len = bsg_job->request_payload.payload_len; |
| total_len = offset + len; |
| |
| /* total len should not be greater than max NVRAM size */ |
| if ((is_qla4010(ha) && total_len > QL4010_NVRAM_SIZE) || |
| ((is_qla4022(ha) || is_qla4032(ha)) && |
| total_len > QL40X2_NVRAM_SIZE)) { |
| ql4_printk(KERN_ERR, ha, "%s: offset+len greater than max" |
| " nvram size, offset=%d len=%d\n", |
| __func__, offset, len); |
| goto leave; |
| } |
| |
| nvram = dma_alloc_coherent(&ha->pdev->dev, len, &nvram_dma, |
| GFP_KERNEL); |
| if (!nvram) { |
| ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for flash " |
| "data\n", __func__); |
| rval = -ENOMEM; |
| goto leave; |
| } |
| |
| sg_copy_to_buffer(bsg_job->request_payload.sg_list, |
| bsg_job->request_payload.sg_cnt, nvram, len); |
| |
| rval = qla4xxx_set_nvram(ha, nvram_dma, offset, len); |
| if (rval) { |
| ql4_printk(KERN_ERR, ha, "%s: set nvram failed\n", __func__); |
| bsg_reply->result = DID_ERROR << 16; |
| rval = -EIO; |
| } else |
| bsg_reply->result = DID_OK << 16; |
| |
| bsg_job_done(bsg_job, bsg_reply->result, |
| bsg_reply->reply_payload_rcv_len); |
| dma_free_coherent(&ha->pdev->dev, len, nvram, nvram_dma); |
| leave: |
| return rval; |
| } |
| |
| static int |
| qla4xxx_restore_defaults(struct bsg_job *bsg_job) |
| { |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| struct scsi_qla_host *ha = to_qla_host(host); |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| uint32_t region = 0; |
| uint32_t field0 = 0; |
| uint32_t field1 = 0; |
| int rval = -EINVAL; |
| |
| bsg_reply->reply_payload_rcv_len = 0; |
| |
| if (unlikely(pci_channel_offline(ha->pdev))) |
| goto leave; |
| |
| if (is_qla4010(ha)) |
| goto leave; |
| |
| if (ql4xxx_reset_active(ha)) { |
| ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); |
| rval = -EBUSY; |
| goto leave; |
| } |
| |
| region = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; |
| field0 = bsg_req->rqst_data.h_vendor.vendor_cmd[2]; |
| field1 = bsg_req->rqst_data.h_vendor.vendor_cmd[3]; |
| |
| rval = qla4xxx_restore_factory_defaults(ha, region, field0, field1); |
| if (rval) { |
| ql4_printk(KERN_ERR, ha, "%s: set nvram failed\n", __func__); |
| bsg_reply->result = DID_ERROR << 16; |
| rval = -EIO; |
| } else |
| bsg_reply->result = DID_OK << 16; |
| |
| bsg_job_done(bsg_job, bsg_reply->result, |
| bsg_reply->reply_payload_rcv_len); |
| leave: |
| return rval; |
| } |
| |
| static int |
| qla4xxx_bsg_get_acb(struct bsg_job *bsg_job) |
| { |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| struct scsi_qla_host *ha = to_qla_host(host); |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| uint32_t acb_type = 0; |
| uint32_t len = 0; |
| dma_addr_t acb_dma; |
| uint8_t *acb = NULL; |
| int rval = -EINVAL; |
| |
| bsg_reply->reply_payload_rcv_len = 0; |
| |
| if (unlikely(pci_channel_offline(ha->pdev))) |
| goto leave; |
| |
| /* Only 4022 and above adapters are supported */ |
| if (is_qla4010(ha)) |
| goto leave; |
| |
| if (ql4xxx_reset_active(ha)) { |
| ql4_printk(KERN_ERR, ha, "%s: reset active\n", __func__); |
| rval = -EBUSY; |
| goto leave; |
| } |
| |
| acb_type = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; |
| len = bsg_job->reply_payload.payload_len; |
| if (len < sizeof(struct addr_ctrl_blk)) { |
| ql4_printk(KERN_ERR, ha, "%s: invalid acb len %d\n", |
| __func__, len); |
| rval = -EINVAL; |
| goto leave; |
| } |
| |
| acb = dma_alloc_coherent(&ha->pdev->dev, len, &acb_dma, GFP_KERNEL); |
| if (!acb) { |
| ql4_printk(KERN_ERR, ha, "%s: dma alloc failed for acb " |
| "data\n", __func__); |
| rval = -ENOMEM; |
| goto leave; |
| } |
| |
| rval = qla4xxx_get_acb(ha, acb_dma, acb_type, len); |
| if (rval) { |
| ql4_printk(KERN_ERR, ha, "%s: get acb failed\n", __func__); |
| bsg_reply->result = DID_ERROR << 16; |
| rval = -EIO; |
| } else { |
| bsg_reply->reply_payload_rcv_len = |
| sg_copy_from_buffer(bsg_job->reply_payload.sg_list, |
| bsg_job->reply_payload.sg_cnt, |
| acb, len); |
| bsg_reply->result = DID_OK << 16; |
| } |
| |
| bsg_job_done(bsg_job, bsg_reply->result, |
| bsg_reply->reply_payload_rcv_len); |
| dma_free_coherent(&ha->pdev->dev, len, acb, acb_dma); |
| leave: |
| return rval; |
| } |
| |
| static void ql4xxx_execute_diag_cmd(struct bsg_job *bsg_job) |
| { |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| struct scsi_qla_host *ha = to_qla_host(host); |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| uint8_t *rsp_ptr = NULL; |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| int status = QLA_ERROR; |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__)); |
| |
| if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) { |
| ql4_printk(KERN_INFO, ha, "%s: Adapter reset in progress. Invalid Request\n", |
| __func__); |
| bsg_reply->result = DID_ERROR << 16; |
| goto exit_diag_mem_test; |
| } |
| |
| bsg_reply->reply_payload_rcv_len = 0; |
| memcpy(mbox_cmd, &bsg_req->rqst_data.h_vendor.vendor_cmd[1], |
| sizeof(uint32_t) * MBOX_REG_COUNT); |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: mbox_cmd: %08X %08X %08X %08X %08X %08X %08X %08X\n", |
| __func__, mbox_cmd[0], mbox_cmd[1], mbox_cmd[2], |
| mbox_cmd[3], mbox_cmd[4], mbox_cmd[5], mbox_cmd[6], |
| mbox_cmd[7])); |
| |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 8, &mbox_cmd[0], |
| &mbox_sts[0]); |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: mbox_sts: %08X %08X %08X %08X %08X %08X %08X %08X\n", |
| __func__, mbox_sts[0], mbox_sts[1], mbox_sts[2], |
| mbox_sts[3], mbox_sts[4], mbox_sts[5], mbox_sts[6], |
| mbox_sts[7])); |
| |
| if (status == QLA_SUCCESS) |
| bsg_reply->result = DID_OK << 16; |
| else |
| bsg_reply->result = DID_ERROR << 16; |
| |
| /* Send mbox_sts to application */ |
| bsg_job->reply_len = sizeof(struct iscsi_bsg_reply) + sizeof(mbox_sts); |
| rsp_ptr = ((uint8_t *)bsg_reply) + sizeof(struct iscsi_bsg_reply); |
| memcpy(rsp_ptr, mbox_sts, sizeof(mbox_sts)); |
| |
| exit_diag_mem_test: |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: bsg_reply->result = x%x, status = %s\n", |
| __func__, bsg_reply->result, STATUS(status))); |
| |
| bsg_job_done(bsg_job, bsg_reply->result, |
| bsg_reply->reply_payload_rcv_len); |
| } |
| |
| static int qla4_83xx_wait_for_loopback_config_comp(struct scsi_qla_host *ha, |
| int wait_for_link) |
| { |
| int status = QLA_SUCCESS; |
| |
| if (!wait_for_completion_timeout(&ha->idc_comp, (IDC_COMP_TOV * HZ))) { |
| ql4_printk(KERN_INFO, ha, "%s: IDC Complete notification not received, Waiting for another %d timeout", |
| __func__, ha->idc_extend_tmo); |
| if (ha->idc_extend_tmo) { |
| if (!wait_for_completion_timeout(&ha->idc_comp, |
| (ha->idc_extend_tmo * HZ))) { |
| ha->notify_idc_comp = 0; |
| ha->notify_link_up_comp = 0; |
| ql4_printk(KERN_WARNING, ha, "%s: Aborting: IDC Complete notification not received", |
| __func__); |
| status = QLA_ERROR; |
| goto exit_wait; |
| } else { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: IDC Complete notification received\n", |
| __func__)); |
| } |
| } |
| } else { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: IDC Complete notification received\n", |
| __func__)); |
| } |
| ha->notify_idc_comp = 0; |
| |
| if (wait_for_link) { |
| if (!wait_for_completion_timeout(&ha->link_up_comp, |
| (IDC_COMP_TOV * HZ))) { |
| ha->notify_link_up_comp = 0; |
| ql4_printk(KERN_WARNING, ha, "%s: Aborting: LINK UP notification not received", |
| __func__); |
| status = QLA_ERROR; |
| goto exit_wait; |
| } else { |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: LINK UP notification received\n", |
| __func__)); |
| } |
| ha->notify_link_up_comp = 0; |
| } |
| |
| exit_wait: |
| return status; |
| } |
| |
| static int qla4_83xx_pre_loopback_config(struct scsi_qla_host *ha, |
| uint32_t *mbox_cmd) |
| { |
| uint32_t config = 0; |
| int status = QLA_SUCCESS; |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__)); |
| |
| status = qla4_83xx_get_port_config(ha, &config); |
| if (status != QLA_SUCCESS) |
| goto exit_pre_loopback_config; |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Default port config=%08X\n", |
| __func__, config)); |
| |
| if ((config & ENABLE_INTERNAL_LOOPBACK) || |
| (config & ENABLE_EXTERNAL_LOOPBACK)) { |
| ql4_printk(KERN_INFO, ha, "%s: Loopback diagnostics already in progress. Invalid request\n", |
| __func__); |
| goto exit_pre_loopback_config; |
| } |
| |
| if (mbox_cmd[1] == QL_DIAG_CMD_TEST_INT_LOOPBACK) |
| config |= ENABLE_INTERNAL_LOOPBACK; |
| |
| if (mbox_cmd[1] == QL_DIAG_CMD_TEST_EXT_LOOPBACK) |
| config |= ENABLE_EXTERNAL_LOOPBACK; |
| |
| config &= ~ENABLE_DCBX; |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: New port config=%08X\n", |
| __func__, config)); |
| |
| ha->notify_idc_comp = 1; |
| ha->notify_link_up_comp = 1; |
| |
| /* get the link state */ |
| qla4xxx_get_firmware_state(ha); |
| |
| status = qla4_83xx_set_port_config(ha, &config); |
| if (status != QLA_SUCCESS) { |
| ha->notify_idc_comp = 0; |
| ha->notify_link_up_comp = 0; |
| goto exit_pre_loopback_config; |
| } |
| exit_pre_loopback_config: |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: status = %s\n", __func__, |
| STATUS(status))); |
| return status; |
| } |
| |
| static int qla4_83xx_post_loopback_config(struct scsi_qla_host *ha, |
| uint32_t *mbox_cmd) |
| { |
| int status = QLA_SUCCESS; |
| uint32_t config = 0; |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__)); |
| |
| status = qla4_83xx_get_port_config(ha, &config); |
| if (status != QLA_SUCCESS) |
| goto exit_post_loopback_config; |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: port config=%08X\n", __func__, |
| config)); |
| |
| if (mbox_cmd[1] == QL_DIAG_CMD_TEST_INT_LOOPBACK) |
| config &= ~ENABLE_INTERNAL_LOOPBACK; |
| else if (mbox_cmd[1] == QL_DIAG_CMD_TEST_EXT_LOOPBACK) |
| config &= ~ENABLE_EXTERNAL_LOOPBACK; |
| |
| config |= ENABLE_DCBX; |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: Restore default port config=%08X\n", __func__, |
| config)); |
| |
| ha->notify_idc_comp = 1; |
| if (ha->addl_fw_state & FW_ADDSTATE_LINK_UP) |
| ha->notify_link_up_comp = 1; |
| |
| status = qla4_83xx_set_port_config(ha, &config); |
| if (status != QLA_SUCCESS) { |
| ql4_printk(KERN_INFO, ha, "%s: Scheduling adapter reset\n", |
| __func__); |
| set_bit(DPC_RESET_HA, &ha->dpc_flags); |
| clear_bit(AF_LOOPBACK, &ha->flags); |
| goto exit_post_loopback_config; |
| } |
| |
| exit_post_loopback_config: |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: status = %s\n", __func__, |
| STATUS(status))); |
| return status; |
| } |
| |
| static void qla4xxx_execute_diag_loopback_cmd(struct bsg_job *bsg_job) |
| { |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| struct scsi_qla_host *ha = to_qla_host(host); |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| uint8_t *rsp_ptr = NULL; |
| uint32_t mbox_cmd[MBOX_REG_COUNT]; |
| uint32_t mbox_sts[MBOX_REG_COUNT]; |
| int wait_for_link = 1; |
| int status = QLA_ERROR; |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__)); |
| |
| bsg_reply->reply_payload_rcv_len = 0; |
| |
| if (test_bit(AF_LOOPBACK, &ha->flags)) { |
| ql4_printk(KERN_INFO, ha, "%s: Loopback Diagnostics already in progress. Invalid Request\n", |
| __func__); |
| bsg_reply->result = DID_ERROR << 16; |
| goto exit_loopback_cmd; |
| } |
| |
| if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) { |
| ql4_printk(KERN_INFO, ha, "%s: Adapter reset in progress. Invalid Request\n", |
| __func__); |
| bsg_reply->result = DID_ERROR << 16; |
| goto exit_loopback_cmd; |
| } |
| |
| memcpy(mbox_cmd, &bsg_req->rqst_data.h_vendor.vendor_cmd[1], |
| sizeof(uint32_t) * MBOX_REG_COUNT); |
| |
| if (is_qla8032(ha) || is_qla8042(ha)) { |
| status = qla4_83xx_pre_loopback_config(ha, mbox_cmd); |
| if (status != QLA_SUCCESS) { |
| bsg_reply->result = DID_ERROR << 16; |
| goto exit_loopback_cmd; |
| } |
| |
| status = qla4_83xx_wait_for_loopback_config_comp(ha, |
| wait_for_link); |
| if (status != QLA_SUCCESS) { |
| bsg_reply->result = DID_TIME_OUT << 16; |
| goto restore; |
| } |
| } |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: mbox_cmd: %08X %08X %08X %08X %08X %08X %08X %08X\n", |
| __func__, mbox_cmd[0], mbox_cmd[1], mbox_cmd[2], |
| mbox_cmd[3], mbox_cmd[4], mbox_cmd[5], mbox_cmd[6], |
| mbox_cmd[7])); |
| |
| status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 8, &mbox_cmd[0], |
| &mbox_sts[0]); |
| |
| if (status == QLA_SUCCESS) |
| bsg_reply->result = DID_OK << 16; |
| else |
| bsg_reply->result = DID_ERROR << 16; |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: mbox_sts: %08X %08X %08X %08X %08X %08X %08X %08X\n", |
| __func__, mbox_sts[0], mbox_sts[1], mbox_sts[2], |
| mbox_sts[3], mbox_sts[4], mbox_sts[5], mbox_sts[6], |
| mbox_sts[7])); |
| |
| /* Send mbox_sts to application */ |
| bsg_job->reply_len = sizeof(struct iscsi_bsg_reply) + sizeof(mbox_sts); |
| rsp_ptr = ((uint8_t *)bsg_reply) + sizeof(struct iscsi_bsg_reply); |
| memcpy(rsp_ptr, mbox_sts, sizeof(mbox_sts)); |
| restore: |
| if (is_qla8032(ha) || is_qla8042(ha)) { |
| status = qla4_83xx_post_loopback_config(ha, mbox_cmd); |
| if (status != QLA_SUCCESS) { |
| bsg_reply->result = DID_ERROR << 16; |
| goto exit_loopback_cmd; |
| } |
| |
| /* for pre_loopback_config() wait for LINK UP only |
| * if PHY LINK is UP */ |
| if (!(ha->addl_fw_state & FW_ADDSTATE_LINK_UP)) |
| wait_for_link = 0; |
| |
| status = qla4_83xx_wait_for_loopback_config_comp(ha, |
| wait_for_link); |
| if (status != QLA_SUCCESS) { |
| bsg_reply->result = DID_TIME_OUT << 16; |
| goto exit_loopback_cmd; |
| } |
| } |
| exit_loopback_cmd: |
| DEBUG2(ql4_printk(KERN_INFO, ha, |
| "%s: bsg_reply->result = x%x, status = %s\n", |
| __func__, bsg_reply->result, STATUS(status))); |
| bsg_job_done(bsg_job, bsg_reply->result, |
| bsg_reply->reply_payload_rcv_len); |
| } |
| |
| static int qla4xxx_execute_diag_test(struct bsg_job *bsg_job) |
| { |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| struct scsi_qla_host *ha = to_qla_host(host); |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| uint32_t diag_cmd; |
| int rval = -EINVAL; |
| |
| DEBUG2(ql4_printk(KERN_INFO, ha, "%s: in\n", __func__)); |
| |
| diag_cmd = bsg_req->rqst_data.h_vendor.vendor_cmd[1]; |
| if (diag_cmd == MBOX_CMD_DIAG_TEST) { |
| switch (bsg_req->rqst_data.h_vendor.vendor_cmd[2]) { |
| case QL_DIAG_CMD_TEST_DDR_SIZE: |
| case QL_DIAG_CMD_TEST_DDR_RW: |
| case QL_DIAG_CMD_TEST_ONCHIP_MEM_RW: |
| case QL_DIAG_CMD_TEST_NVRAM: |
| case QL_DIAG_CMD_TEST_FLASH_ROM: |
| case QL_DIAG_CMD_TEST_DMA_XFER: |
| case QL_DIAG_CMD_SELF_DDR_RW: |
| case QL_DIAG_CMD_SELF_ONCHIP_MEM_RW: |
| /* Execute diag test for adapter RAM/FLASH */ |
| ql4xxx_execute_diag_cmd(bsg_job); |
| /* Always return success as we want to sent bsg_reply |
| * to Application */ |
| rval = QLA_SUCCESS; |
| break; |
| |
| case QL_DIAG_CMD_TEST_INT_LOOPBACK: |
| case QL_DIAG_CMD_TEST_EXT_LOOPBACK: |
| /* Execute diag test for Network */ |
| qla4xxx_execute_diag_loopback_cmd(bsg_job); |
| /* Always return success as we want to sent bsg_reply |
| * to Application */ |
| rval = QLA_SUCCESS; |
| break; |
| default: |
| ql4_printk(KERN_ERR, ha, "%s: Invalid diag test: 0x%x\n", |
| __func__, |
| bsg_req->rqst_data.h_vendor.vendor_cmd[2]); |
| } |
| } else if ((diag_cmd == MBOX_CMD_SET_LED_CONFIG) || |
| (diag_cmd == MBOX_CMD_GET_LED_CONFIG)) { |
| ql4xxx_execute_diag_cmd(bsg_job); |
| rval = QLA_SUCCESS; |
| } else { |
| ql4_printk(KERN_ERR, ha, "%s: Invalid diag cmd: 0x%x\n", |
| __func__, diag_cmd); |
| } |
| |
| return rval; |
| } |
| |
| /** |
| * qla4xxx_process_vendor_specific - handle vendor specific bsg request |
| * @bsg_job: iscsi_bsg_job to handle |
| **/ |
| int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job) |
| { |
| struct iscsi_bsg_reply *bsg_reply = bsg_job->reply; |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| struct scsi_qla_host *ha = to_qla_host(host); |
| |
| switch (bsg_req->rqst_data.h_vendor.vendor_cmd[0]) { |
| case QLISCSI_VND_READ_FLASH: |
| return qla4xxx_read_flash(bsg_job); |
| |
| case QLISCSI_VND_UPDATE_FLASH: |
| return qla4xxx_update_flash(bsg_job); |
| |
| case QLISCSI_VND_GET_ACB_STATE: |
| return qla4xxx_get_acb_state(bsg_job); |
| |
| case QLISCSI_VND_READ_NVRAM: |
| return qla4xxx_read_nvram(bsg_job); |
| |
| case QLISCSI_VND_UPDATE_NVRAM: |
| return qla4xxx_update_nvram(bsg_job); |
| |
| case QLISCSI_VND_RESTORE_DEFAULTS: |
| return qla4xxx_restore_defaults(bsg_job); |
| |
| case QLISCSI_VND_GET_ACB: |
| return qla4xxx_bsg_get_acb(bsg_job); |
| |
| case QLISCSI_VND_DIAG_TEST: |
| return qla4xxx_execute_diag_test(bsg_job); |
| |
| default: |
| ql4_printk(KERN_ERR, ha, "%s: invalid BSG vendor command: " |
| "0x%x\n", __func__, bsg_req->msgcode); |
| bsg_reply->result = (DID_ERROR << 16); |
| bsg_reply->reply_payload_rcv_len = 0; |
| bsg_job_done(bsg_job, bsg_reply->result, |
| bsg_reply->reply_payload_rcv_len); |
| return -ENOSYS; |
| } |
| } |
| |
| /** |
| * qla4xxx_bsg_request - handle bsg request from ISCSI transport |
| * @bsg_job: iscsi_bsg_job to handle |
| */ |
| int qla4xxx_bsg_request(struct bsg_job *bsg_job) |
| { |
| struct iscsi_bsg_request *bsg_req = bsg_job->request; |
| struct Scsi_Host *host = iscsi_job_to_shost(bsg_job); |
| struct scsi_qla_host *ha = to_qla_host(host); |
| |
| switch (bsg_req->msgcode) { |
| case ISCSI_BSG_HST_VENDOR: |
| return qla4xxx_process_vendor_specific(bsg_job); |
| |
| default: |
| ql4_printk(KERN_ERR, ha, "%s: invalid BSG command: 0x%x\n", |
| __func__, bsg_req->msgcode); |
| } |
| |
| return -ENOSYS; |
| } |