| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| // Copyright (C) 2016 ARM Ltd. |
| // based on the Allwinner H3 dtsi: |
| // Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> |
| |
| #include <dt-bindings/clock/sun50i-a64-ccu.h> |
| #include <dt-bindings/clock/sun8i-de2.h> |
| #include <dt-bindings/clock/sun8i-r-ccu.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/reset/sun50i-a64-ccu.h> |
| #include <dt-bindings/reset/sun8i-de2.h> |
| #include <dt-bindings/reset/sun8i-r-ccu.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| interrupt-parent = <&gic>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| chosen { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| simplefb_lcd: framebuffer-lcd { |
| compatible = "allwinner,simple-framebuffer", |
| "simple-framebuffer"; |
| allwinner,pipeline = "mixer0-lcd0"; |
| clocks = <&ccu CLK_TCON0>, |
| <&display_clocks CLK_MIXER0>; |
| status = "disabled"; |
| }; |
| |
| simplefb_hdmi: framebuffer-hdmi { |
| compatible = "allwinner,simple-framebuffer", |
| "simple-framebuffer"; |
| allwinner,pipeline = "mixer1-lcd1-hdmi"; |
| clocks = <&display_clocks CLK_MIXER1>, |
| <&ccu CLK_TCON1>, <&ccu CLK_HDMI>; |
| status = "disabled"; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| reg = <0>; |
| enable-method = "psci"; |
| next-level-cache = <&L2>; |
| clocks = <&ccu 21>; |
| clock-names = "cpu"; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu1: cpu@1 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| reg = <1>; |
| enable-method = "psci"; |
| next-level-cache = <&L2>; |
| clocks = <&ccu 21>; |
| clock-names = "cpu"; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu2: cpu@2 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| reg = <2>; |
| enable-method = "psci"; |
| next-level-cache = <&L2>; |
| clocks = <&ccu 21>; |
| clock-names = "cpu"; |
| #cooling-cells = <2>; |
| }; |
| |
| cpu3: cpu@3 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| reg = <3>; |
| enable-method = "psci"; |
| next-level-cache = <&L2>; |
| clocks = <&ccu 21>; |
| clock-names = "cpu"; |
| #cooling-cells = <2>; |
| }; |
| |
| L2: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| }; |
| }; |
| |
| de: display-engine { |
| compatible = "allwinner,sun50i-a64-display-engine"; |
| allwinner,pipelines = <&mixer0>, |
| <&mixer1>; |
| status = "disabled"; |
| }; |
| |
| osc24M: osc24M_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-output-names = "osc24M"; |
| }; |
| |
| osc32k: osc32k_clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <32768>; |
| clock-output-names = "ext-osc32k"; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a53-pmu"; |
| interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| sound: sound { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "sun50i-a64-audio"; |
| simple-audio-card,format = "i2s"; |
| simple-audio-card,frame-master = <&cpudai>; |
| simple-audio-card,bitclock-master = <&cpudai>; |
| simple-audio-card,mclk-fs = <128>; |
| simple-audio-card,aux-devs = <&codec_analog>; |
| simple-audio-card,routing = |
| "Left DAC", "AIF1 Slot 0 Left", |
| "Right DAC", "AIF1 Slot 0 Right", |
| "AIF1 Slot 0 Left ADC", "Left ADC", |
| "AIF1 Slot 0 Right ADC", "Right ADC"; |
| status = "disabled"; |
| |
| cpudai: simple-audio-card,cpu { |
| sound-dai = <&dai>; |
| }; |
| |
| link_codec: simple-audio-card,codec { |
| sound-dai = <&codec>; |
| }; |
| }; |
| |
| sound_spdif { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "On-board SPDIF"; |
| |
| simple-audio-card,cpu { |
| sound-dai = <&spdif>; |
| }; |
| |
| simple-audio-card,codec { |
| sound-dai = <&spdif_out>; |
| }; |
| }; |
| |
| spdif_out: spdif-out { |
| #sound-dai-cells = <0>; |
| compatible = "linux,spdif-dit"; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| allwinner,erratum-unknown1; |
| interrupts = <GIC_PPI 13 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 14 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 11 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 10 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| thermal-zones { |
| cpu_thermal: cpu0-thermal { |
| /* milliseconds */ |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&ths 0>; |
| |
| cooling-maps { |
| map0 { |
| trip = <&cpu_alert0>; |
| cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| map1 { |
| trip = <&cpu_alert1>; |
| cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| }; |
| }; |
| |
| trips { |
| cpu_alert0: cpu_alert0 { |
| /* milliCelsius */ |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu_alert1: cpu_alert1 { |
| /* milliCelsius */ |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| |
| cpu_crit: cpu_crit { |
| /* milliCelsius */ |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| gpu0_thermal: gpu0-thermal { |
| /* milliseconds */ |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&ths 1>; |
| }; |
| |
| gpu1_thermal: gpu1-thermal { |
| /* milliseconds */ |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&ths 2>; |
| }; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| bus@1000000 { |
| compatible = "allwinner,sun50i-a64-de2"; |
| reg = <0x1000000 0x400000>; |
| allwinner,sram = <&de2_sram 1>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x1000000 0x400000>; |
| |
| display_clocks: clock@0 { |
| compatible = "allwinner,sun50i-a64-de2-clk"; |
| reg = <0x0 0x10000>; |
| clocks = <&ccu CLK_BUS_DE>, |
| <&ccu CLK_DE>; |
| clock-names = "bus", |
| "mod"; |
| resets = <&ccu RST_BUS_DE>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| rotate: rotate@20000 { |
| compatible = "allwinner,sun50i-a64-de2-rotate", |
| "allwinner,sun8i-a83t-de2-rotate"; |
| reg = <0x20000 0x10000>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&display_clocks CLK_BUS_ROT>, |
| <&display_clocks CLK_ROT>; |
| clock-names = "bus", |
| "mod"; |
| resets = <&display_clocks RST_ROT>; |
| }; |
| |
| mixer0: mixer@100000 { |
| compatible = "allwinner,sun50i-a64-de2-mixer-0"; |
| reg = <0x100000 0x100000>; |
| clocks = <&display_clocks CLK_BUS_MIXER0>, |
| <&display_clocks CLK_MIXER0>; |
| clock-names = "bus", |
| "mod"; |
| resets = <&display_clocks RST_MIXER0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mixer0_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| mixer0_out_tcon0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&tcon0_in_mixer0>; |
| }; |
| |
| mixer0_out_tcon1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&tcon1_in_mixer0>; |
| }; |
| }; |
| }; |
| }; |
| |
| mixer1: mixer@200000 { |
| compatible = "allwinner,sun50i-a64-de2-mixer-1"; |
| reg = <0x200000 0x100000>; |
| clocks = <&display_clocks CLK_BUS_MIXER1>, |
| <&display_clocks CLK_MIXER1>; |
| clock-names = "bus", |
| "mod"; |
| resets = <&display_clocks RST_MIXER1>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mixer1_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| mixer1_out_tcon0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&tcon0_in_mixer1>; |
| }; |
| |
| mixer1_out_tcon1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&tcon1_in_mixer1>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| syscon: syscon@1c00000 { |
| compatible = "allwinner,sun50i-a64-system-control"; |
| reg = <0x01c00000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| sram_c: sram@18000 { |
| compatible = "mmio-sram"; |
| reg = <0x00018000 0x28000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x00018000 0x28000>; |
| |
| de2_sram: sram-section@0 { |
| compatible = "allwinner,sun50i-a64-sram-c"; |
| reg = <0x0000 0x28000>; |
| }; |
| }; |
| |
| sram_c1: sram@1d00000 { |
| compatible = "mmio-sram"; |
| reg = <0x01d00000 0x40000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x01d00000 0x40000>; |
| |
| ve_sram: sram-section@0 { |
| compatible = "allwinner,sun50i-a64-sram-c1", |
| "allwinner,sun4i-a10-sram-c1"; |
| reg = <0x000000 0x40000>; |
| }; |
| }; |
| }; |
| |
| dma: dma-controller@1c02000 { |
| compatible = "allwinner,sun50i-a64-dma"; |
| reg = <0x01c02000 0x1000>; |
| interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_DMA>; |
| dma-channels = <8>; |
| dma-requests = <27>; |
| resets = <&ccu RST_BUS_DMA>; |
| #dma-cells = <1>; |
| }; |
| |
| tcon0: lcd-controller@1c0c000 { |
| compatible = "allwinner,sun50i-a64-tcon-lcd", |
| "allwinner,sun8i-a83t-tcon-lcd"; |
| reg = <0x01c0c000 0x1000>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; |
| clock-names = "ahb", "tcon-ch0"; |
| clock-output-names = "tcon-pixel-clock"; |
| #clock-cells = <0>; |
| resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; |
| reset-names = "lcd", "lvds"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| tcon0_in: port@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| tcon0_in_mixer0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&mixer0_out_tcon0>; |
| }; |
| |
| tcon0_in_mixer1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&mixer1_out_tcon0>; |
| }; |
| }; |
| |
| tcon0_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| tcon0_out_dsi: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&dsi_in_tcon0>; |
| allwinner,tcon-channel = <1>; |
| }; |
| }; |
| }; |
| }; |
| |
| tcon1: lcd-controller@1c0d000 { |
| compatible = "allwinner,sun50i-a64-tcon-tv", |
| "allwinner,sun8i-a83t-tcon-tv"; |
| reg = <0x01c0d000 0x1000>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>; |
| clock-names = "ahb", "tcon-ch1"; |
| resets = <&ccu RST_BUS_TCON1>; |
| reset-names = "lcd"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| tcon1_in: port@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| tcon1_in_mixer0: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&mixer0_out_tcon1>; |
| }; |
| |
| tcon1_in_mixer1: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&mixer1_out_tcon1>; |
| }; |
| }; |
| |
| tcon1_out: port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| |
| tcon1_out_hdmi: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&hdmi_in_tcon1>; |
| }; |
| }; |
| }; |
| }; |
| |
| video-codec@1c0e000 { |
| compatible = "allwinner,sun50i-a64-video-engine"; |
| reg = <0x01c0e000 0x1000>; |
| clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, |
| <&ccu CLK_DRAM_VE>; |
| clock-names = "ahb", "mod", "ram"; |
| resets = <&ccu RST_BUS_VE>; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; |
| allwinner,sram = <&ve_sram 1>; |
| }; |
| |
| mmc0: mmc@1c0f000 { |
| compatible = "allwinner,sun50i-a64-mmc"; |
| reg = <0x01c0f000 0x1000>; |
| clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; |
| clock-names = "ahb", "mmc"; |
| resets = <&ccu RST_BUS_MMC0>; |
| reset-names = "ahb"; |
| interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| max-frequency = <150000000>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc1: mmc@1c10000 { |
| compatible = "allwinner,sun50i-a64-mmc"; |
| reg = <0x01c10000 0x1000>; |
| clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; |
| clock-names = "ahb", "mmc"; |
| resets = <&ccu RST_BUS_MMC1>; |
| reset-names = "ahb"; |
| interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| max-frequency = <150000000>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| mmc2: mmc@1c11000 { |
| compatible = "allwinner,sun50i-a64-emmc"; |
| reg = <0x01c11000 0x1000>; |
| clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; |
| clock-names = "ahb", "mmc"; |
| resets = <&ccu RST_BUS_MMC2>; |
| reset-names = "ahb"; |
| interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| max-frequency = <200000000>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| sid: eeprom@1c14000 { |
| compatible = "allwinner,sun50i-a64-sid"; |
| reg = <0x1c14000 0x400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| ths_calibration: thermal-sensor-calibration@34 { |
| reg = <0x34 0x8>; |
| }; |
| }; |
| |
| crypto: crypto@1c15000 { |
| compatible = "allwinner,sun50i-a64-crypto"; |
| reg = <0x01c15000 0x1000>; |
| interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; |
| clock-names = "bus", "mod"; |
| resets = <&ccu RST_BUS_CE>; |
| }; |
| |
| usb_otg: usb@1c19000 { |
| compatible = "allwinner,sun8i-a33-musb"; |
| reg = <0x01c19000 0x0400>; |
| clocks = <&ccu CLK_BUS_OTG>; |
| resets = <&ccu RST_BUS_OTG>; |
| interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "mc"; |
| phys = <&usbphy 0>; |
| phy-names = "usb"; |
| extcon = <&usbphy 0>; |
| dr_mode = "otg"; |
| status = "disabled"; |
| }; |
| |
| usbphy: phy@1c19400 { |
| compatible = "allwinner,sun50i-a64-usb-phy"; |
| reg = <0x01c19400 0x14>, |
| <0x01c1a800 0x4>, |
| <0x01c1b800 0x4>; |
| reg-names = "phy_ctrl", |
| "pmu0", |
| "pmu1"; |
| clocks = <&ccu CLK_USB_PHY0>, |
| <&ccu CLK_USB_PHY1>; |
| clock-names = "usb0_phy", |
| "usb1_phy"; |
| resets = <&ccu RST_USB_PHY0>, |
| <&ccu RST_USB_PHY1>; |
| reset-names = "usb0_reset", |
| "usb1_reset"; |
| status = "disabled"; |
| #phy-cells = <1>; |
| }; |
| |
| ehci0: usb@1c1a000 { |
| compatible = "allwinner,sun50i-a64-ehci", "generic-ehci"; |
| reg = <0x01c1a000 0x100>; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_OHCI0>, |
| <&ccu CLK_BUS_EHCI0>, |
| <&ccu CLK_USB_OHCI0>; |
| resets = <&ccu RST_BUS_OHCI0>, |
| <&ccu RST_BUS_EHCI0>; |
| status = "disabled"; |
| }; |
| |
| ohci0: usb@1c1a400 { |
| compatible = "allwinner,sun50i-a64-ohci", "generic-ohci"; |
| reg = <0x01c1a400 0x100>; |
| interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_OHCI0>, |
| <&ccu CLK_USB_OHCI0>; |
| resets = <&ccu RST_BUS_OHCI0>; |
| status = "disabled"; |
| }; |
| |
| ehci1: usb@1c1b000 { |
| compatible = "allwinner,sun50i-a64-ehci", "generic-ehci"; |
| reg = <0x01c1b000 0x100>; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_OHCI1>, |
| <&ccu CLK_BUS_EHCI1>, |
| <&ccu CLK_USB_OHCI1>; |
| resets = <&ccu RST_BUS_OHCI1>, |
| <&ccu RST_BUS_EHCI1>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ohci1: usb@1c1b400 { |
| compatible = "allwinner,sun50i-a64-ohci", "generic-ohci"; |
| reg = <0x01c1b400 0x100>; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_OHCI1>, |
| <&ccu CLK_USB_OHCI1>; |
| resets = <&ccu RST_BUS_OHCI1>; |
| phys = <&usbphy 1>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| ccu: clock@1c20000 { |
| compatible = "allwinner,sun50i-a64-ccu"; |
| reg = <0x01c20000 0x400>; |
| clocks = <&osc24M>, <&rtc 0>; |
| clock-names = "hosc", "losc"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| pio: pinctrl@1c20800 { |
| compatible = "allwinner,sun50i-a64-pinctrl"; |
| reg = <0x01c20800 0x400>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; |
| clock-names = "apb", "hosc", "losc"; |
| gpio-controller; |
| #gpio-cells = <3>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| |
| csi_pins: csi-pins { |
| pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6", |
| "PE7", "PE8", "PE9", "PE10", "PE11"; |
| function = "csi"; |
| }; |
| |
| /omit-if-no-ref/ |
| csi_mclk_pin: csi-mclk-pin { |
| pins = "PE1"; |
| function = "csi"; |
| }; |
| |
| i2c0_pins: i2c0-pins { |
| pins = "PH0", "PH1"; |
| function = "i2c0"; |
| }; |
| |
| i2c1_pins: i2c1-pins { |
| pins = "PH2", "PH3"; |
| function = "i2c1"; |
| }; |
| |
| i2c2_pins: i2c2-pins { |
| pins = "PE14", "PE15"; |
| function = "i2c2"; |
| }; |
| |
| /omit-if-no-ref/ |
| lcd_rgb666_pins: lcd-rgb666-pins { |
| pins = "PD0", "PD1", "PD2", "PD3", "PD4", |
| "PD5", "PD6", "PD7", "PD8", "PD9", |
| "PD10", "PD11", "PD12", "PD13", |
| "PD14", "PD15", "PD16", "PD17", |
| "PD18", "PD19", "PD20", "PD21"; |
| function = "lcd0"; |
| }; |
| |
| mmc0_pins: mmc0-pins { |
| pins = "PF0", "PF1", "PF2", "PF3", |
| "PF4", "PF5"; |
| function = "mmc0"; |
| drive-strength = <30>; |
| bias-pull-up; |
| }; |
| |
| mmc1_pins: mmc1-pins { |
| pins = "PG0", "PG1", "PG2", "PG3", |
| "PG4", "PG5"; |
| function = "mmc1"; |
| drive-strength = <30>; |
| bias-pull-up; |
| }; |
| |
| mmc2_pins: mmc2-pins { |
| pins = "PC5", "PC6", "PC8", "PC9", |
| "PC10","PC11", "PC12", "PC13", |
| "PC14", "PC15", "PC16"; |
| function = "mmc2"; |
| drive-strength = <30>; |
| bias-pull-up; |
| }; |
| |
| mmc2_ds_pin: mmc2-ds-pin { |
| pins = "PC1"; |
| function = "mmc2"; |
| drive-strength = <30>; |
| bias-pull-up; |
| }; |
| |
| pwm_pin: pwm-pin { |
| pins = "PD22"; |
| function = "pwm"; |
| }; |
| |
| rmii_pins: rmii-pins { |
| pins = "PD10", "PD11", "PD13", "PD14", "PD17", |
| "PD18", "PD19", "PD20", "PD22", "PD23"; |
| function = "emac"; |
| drive-strength = <40>; |
| }; |
| |
| rgmii_pins: rgmii-pins { |
| pins = "PD8", "PD9", "PD10", "PD11", "PD12", |
| "PD13", "PD15", "PD16", "PD17", "PD18", |
| "PD19", "PD20", "PD21", "PD22", "PD23"; |
| function = "emac"; |
| drive-strength = <40>; |
| }; |
| |
| spdif_tx_pin: spdif-tx-pin { |
| pins = "PH8"; |
| function = "spdif"; |
| }; |
| |
| spi0_pins: spi0-pins { |
| pins = "PC0", "PC1", "PC2", "PC3"; |
| function = "spi0"; |
| }; |
| |
| spi1_pins: spi1-pins { |
| pins = "PD0", "PD1", "PD2", "PD3"; |
| function = "spi1"; |
| }; |
| |
| uart0_pb_pins: uart0-pb-pins { |
| pins = "PB8", "PB9"; |
| function = "uart0"; |
| }; |
| |
| uart1_pins: uart1-pins { |
| pins = "PG6", "PG7"; |
| function = "uart1"; |
| }; |
| |
| uart1_rts_cts_pins: uart1-rts-cts-pins { |
| pins = "PG8", "PG9"; |
| function = "uart1"; |
| }; |
| |
| uart2_pins: uart2-pins { |
| pins = "PB0", "PB1"; |
| function = "uart2"; |
| }; |
| |
| uart3_pins: uart3-pins { |
| pins = "PD0", "PD1"; |
| function = "uart3"; |
| }; |
| |
| uart4_pins: uart4-pins { |
| pins = "PD2", "PD3"; |
| function = "uart4"; |
| }; |
| |
| uart4_rts_cts_pins: uart4-rts-cts-pins { |
| pins = "PD4", "PD5"; |
| function = "uart4"; |
| }; |
| }; |
| |
| spdif: spdif@1c21000 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun50i-a64-spdif", |
| "allwinner,sun8i-h3-spdif"; |
| reg = <0x01c21000 0x400>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; |
| resets = <&ccu RST_BUS_SPDIF>; |
| clock-names = "apb", "spdif"; |
| dmas = <&dma 2>; |
| dma-names = "tx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spdif_tx_pin>; |
| status = "disabled"; |
| }; |
| |
| lradc: lradc@1c21800 { |
| compatible = "allwinner,sun50i-a64-lradc", |
| "allwinner,sun8i-a83t-r-lradc"; |
| reg = <0x01c21800 0x400>; |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| i2s0: i2s@1c22000 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun50i-a64-i2s", |
| "allwinner,sun8i-h3-i2s"; |
| reg = <0x01c22000 0x400>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>; |
| clock-names = "apb", "mod"; |
| resets = <&ccu RST_BUS_I2S0>; |
| dma-names = "rx", "tx"; |
| dmas = <&dma 3>, <&dma 3>; |
| status = "disabled"; |
| }; |
| |
| i2s1: i2s@1c22400 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun50i-a64-i2s", |
| "allwinner,sun8i-h3-i2s"; |
| reg = <0x01c22400 0x400>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>; |
| clock-names = "apb", "mod"; |
| resets = <&ccu RST_BUS_I2S1>; |
| dma-names = "rx", "tx"; |
| dmas = <&dma 4>, <&dma 4>; |
| status = "disabled"; |
| }; |
| |
| dai: dai@1c22c00 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun50i-a64-codec-i2s"; |
| reg = <0x01c22c00 0x200>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; |
| clock-names = "apb", "mod"; |
| resets = <&ccu RST_BUS_CODEC>; |
| dmas = <&dma 15>, <&dma 15>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| |
| codec: codec@1c22e00 { |
| #sound-dai-cells = <0>; |
| compatible = "allwinner,sun8i-a33-codec"; |
| reg = <0x01c22e00 0x600>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; |
| clock-names = "bus", "mod"; |
| status = "disabled"; |
| }; |
| |
| ths: thermal-sensor@1c25000 { |
| compatible = "allwinner,sun50i-a64-ths"; |
| reg = <0x01c25000 0x100>; |
| clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; |
| clock-names = "bus", "mod"; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| resets = <&ccu RST_BUS_THS>; |
| nvmem-cells = <&ths_calibration>; |
| nvmem-cell-names = "calibration"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| uart0: serial@1c28000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28000 0x400>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART0>; |
| resets = <&ccu RST_BUS_UART0>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@1c28400 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28400 0x400>; |
| interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART1>; |
| resets = <&ccu RST_BUS_UART1>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@1c28800 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28800 0x400>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART2>; |
| resets = <&ccu RST_BUS_UART2>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@1c28c00 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c28c00 0x400>; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART3>; |
| resets = <&ccu RST_BUS_UART3>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@1c29000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x01c29000 0x400>; |
| interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&ccu CLK_BUS_UART4>; |
| resets = <&ccu RST_BUS_UART4>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@1c2ac00 { |
| compatible = "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c2ac00 0x400>; |
| interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_I2C0>; |
| resets = <&ccu RST_BUS_I2C0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c1: i2c@1c2b000 { |
| compatible = "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c2b000 0x400>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_I2C1>; |
| resets = <&ccu RST_BUS_I2C1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| i2c2: i2c@1c2b400 { |
| compatible = "allwinner,sun6i-a31-i2c"; |
| reg = <0x01c2b400 0x400>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_I2C2>; |
| resets = <&ccu RST_BUS_I2C2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| spi0: spi@1c68000 { |
| compatible = "allwinner,sun8i-h3-spi"; |
| reg = <0x01c68000 0x1000>; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma 23>, <&dma 23>; |
| dma-names = "rx", "tx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_pins>; |
| resets = <&ccu RST_BUS_SPI0>; |
| status = "disabled"; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| spi1: spi@1c69000 { |
| compatible = "allwinner,sun8i-h3-spi"; |
| reg = <0x01c69000 0x1000>; |
| interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; |
| clock-names = "ahb", "mod"; |
| dmas = <&dma 24>, <&dma 24>; |
| dma-names = "rx", "tx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi1_pins>; |
| resets = <&ccu RST_BUS_SPI1>; |
| status = "disabled"; |
| num-cs = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| emac: ethernet@1c30000 { |
| compatible = "allwinner,sun50i-a64-emac"; |
| syscon = <&syscon>; |
| reg = <0x01c30000 0x10000>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "macirq"; |
| resets = <&ccu RST_BUS_EMAC>; |
| reset-names = "stmmaceth"; |
| clocks = <&ccu CLK_BUS_EMAC>; |
| clock-names = "stmmaceth"; |
| status = "disabled"; |
| |
| mdio: mdio { |
| compatible = "snps,dwmac-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| mali: gpu@1c40000 { |
| compatible = "allwinner,sun50i-a64-mali", "arm,mali-400"; |
| reg = <0x01c40000 0x10000>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "gp", |
| "gpmmu", |
| "pp0", |
| "ppmmu0", |
| "pp1", |
| "ppmmu1", |
| "pmu"; |
| clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>; |
| clock-names = "bus", "core"; |
| resets = <&ccu RST_BUS_GPU>; |
| }; |
| |
| gic: interrupt-controller@1c81000 { |
| compatible = "arm,gic-400"; |
| reg = <0x01c81000 0x1000>, |
| <0x01c82000 0x2000>, |
| <0x01c84000 0x2000>, |
| <0x01c86000 0x2000>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| }; |
| |
| pwm: pwm@1c21400 { |
| compatible = "allwinner,sun50i-a64-pwm", |
| "allwinner,sun5i-a13-pwm"; |
| reg = <0x01c21400 0x400>; |
| clocks = <&osc24M>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm_pin>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| mbus: dram-controller@1c62000 { |
| compatible = "allwinner,sun50i-a64-mbus"; |
| reg = <0x01c62000 0x1000>; |
| clocks = <&ccu 112>; |
| dma-ranges = <0x00000000 0x40000000 0xc0000000>; |
| #interconnect-cells = <1>; |
| }; |
| |
| csi: csi@1cb0000 { |
| compatible = "allwinner,sun50i-a64-csi"; |
| reg = <0x01cb0000 0x1000>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_CSI>, |
| <&ccu CLK_CSI_SCLK>, |
| <&ccu CLK_DRAM_CSI>; |
| clock-names = "bus", "mod", "ram"; |
| resets = <&ccu RST_BUS_CSI>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&csi_pins>; |
| status = "disabled"; |
| }; |
| |
| dsi: dsi@1ca0000 { |
| compatible = "allwinner,sun50i-a64-mipi-dsi"; |
| reg = <0x01ca0000 0x1000>; |
| interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_MIPI_DSI>; |
| resets = <&ccu RST_BUS_MIPI_DSI>; |
| phys = <&dphy>; |
| phy-names = "dphy"; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port { |
| dsi_in_tcon0: endpoint { |
| remote-endpoint = <&tcon0_out_dsi>; |
| }; |
| }; |
| }; |
| |
| dphy: d-phy@1ca1000 { |
| compatible = "allwinner,sun50i-a64-mipi-dphy", |
| "allwinner,sun6i-a31-mipi-dphy"; |
| reg = <0x01ca1000 0x1000>; |
| clocks = <&ccu CLK_BUS_MIPI_DSI>, |
| <&ccu CLK_DSI_DPHY>; |
| clock-names = "bus", "mod"; |
| resets = <&ccu RST_BUS_MIPI_DSI>; |
| status = "disabled"; |
| #phy-cells = <0>; |
| }; |
| |
| deinterlace: deinterlace@1e00000 { |
| compatible = "allwinner,sun50i-a64-deinterlace", |
| "allwinner,sun8i-h3-deinterlace"; |
| reg = <0x01e00000 0x20000>; |
| clocks = <&ccu CLK_BUS_DEINTERLACE>, |
| <&ccu CLK_DEINTERLACE>, |
| <&ccu CLK_DRAM_DEINTERLACE>; |
| clock-names = "bus", "mod", "ram"; |
| resets = <&ccu RST_BUS_DEINTERLACE>; |
| interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| interconnects = <&mbus 9>; |
| interconnect-names = "dma-mem"; |
| }; |
| |
| hdmi: hdmi@1ee0000 { |
| compatible = "allwinner,sun50i-a64-dw-hdmi", |
| "allwinner,sun8i-a83t-dw-hdmi"; |
| reg = <0x01ee0000 0x10000>; |
| reg-io-width = <1>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, |
| <&ccu CLK_HDMI>; |
| clock-names = "iahb", "isfr", "tmds"; |
| resets = <&ccu RST_BUS_HDMI1>; |
| reset-names = "ctrl"; |
| phys = <&hdmi_phy>; |
| phy-names = "phy"; |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| hdmi_in: port@0 { |
| reg = <0>; |
| |
| hdmi_in_tcon1: endpoint { |
| remote-endpoint = <&tcon1_out_hdmi>; |
| }; |
| }; |
| |
| hdmi_out: port@1 { |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| hdmi_phy: hdmi-phy@1ef0000 { |
| compatible = "allwinner,sun50i-a64-hdmi-phy"; |
| reg = <0x01ef0000 0x10000>; |
| clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, |
| <&ccu CLK_PLL_VIDEO0>; |
| clock-names = "bus", "mod", "pll-0"; |
| resets = <&ccu RST_BUS_HDMI0>; |
| reset-names = "phy"; |
| #phy-cells = <0>; |
| }; |
| |
| rtc: rtc@1f00000 { |
| compatible = "allwinner,sun50i-a64-rtc", |
| "allwinner,sun8i-h3-rtc"; |
| reg = <0x01f00000 0x400>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| clock-output-names = "osc32k", "osc32k-out", "iosc"; |
| clocks = <&osc32k>; |
| #clock-cells = <1>; |
| }; |
| |
| r_intc: interrupt-controller@1f00c00 { |
| compatible = "allwinner,sun50i-a64-r-intc", |
| "allwinner,sun6i-a31-r-intc"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0x01f00c00 0x400>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| r_ccu: clock@1f01400 { |
| compatible = "allwinner,sun50i-a64-r-ccu"; |
| reg = <0x01f01400 0x100>; |
| clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, |
| <&ccu CLK_PLL_PERIPH0>; |
| clock-names = "hosc", "losc", "iosc", "pll-periph"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| codec_analog: codec-analog@1f015c0 { |
| compatible = "allwinner,sun50i-a64-codec-analog"; |
| reg = <0x01f015c0 0x4>; |
| status = "disabled"; |
| }; |
| |
| r_i2c: i2c@1f02400 { |
| compatible = "allwinner,sun50i-a64-i2c", |
| "allwinner,sun6i-a31-i2c"; |
| reg = <0x01f02400 0x400>; |
| interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&r_ccu CLK_APB0_I2C>; |
| resets = <&r_ccu RST_APB0_I2C>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| r_ir: ir@1f02000 { |
| compatible = "allwinner,sun50i-a64-ir", |
| "allwinner,sun6i-a31-ir"; |
| reg = <0x01f02000 0x400>; |
| clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; |
| clock-names = "apb", "ir"; |
| resets = <&r_ccu RST_APB0_IR>; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&r_ir_rx_pin>; |
| status = "disabled"; |
| }; |
| |
| r_pwm: pwm@1f03800 { |
| compatible = "allwinner,sun50i-a64-pwm", |
| "allwinner,sun5i-a13-pwm"; |
| reg = <0x01f03800 0x400>; |
| clocks = <&osc24M>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&r_pwm_pin>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| r_pio: pinctrl@1f02c00 { |
| compatible = "allwinner,sun50i-a64-r-pinctrl"; |
| reg = <0x01f02c00 0x400>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; |
| clock-names = "apb", "hosc", "losc"; |
| gpio-controller; |
| #gpio-cells = <3>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| |
| r_i2c_pl89_pins: r-i2c-pl89-pins { |
| pins = "PL8", "PL9"; |
| function = "s_i2c"; |
| }; |
| |
| r_ir_rx_pin: r-ir-rx-pin { |
| pins = "PL11"; |
| function = "s_cir_rx"; |
| }; |
| |
| r_pwm_pin: r-pwm-pin { |
| pins = "PL10"; |
| function = "s_pwm"; |
| }; |
| |
| r_rsb_pins: r-rsb-pins { |
| pins = "PL0", "PL1"; |
| function = "s_rsb"; |
| }; |
| }; |
| |
| r_rsb: rsb@1f03400 { |
| compatible = "allwinner,sun8i-a23-rsb"; |
| reg = <0x01f03400 0x400>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&r_ccu 6>; |
| clock-frequency = <3000000>; |
| resets = <&r_ccu 2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&r_rsb_pins>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| wdt0: watchdog@1c20ca0 { |
| compatible = "allwinner,sun50i-a64-wdt", |
| "allwinner,sun6i-a31-wdt"; |
| reg = <0x01c20ca0 0x20>; |
| interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&osc24M>; |
| }; |
| }; |
| }; |
