| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * pmic-cpcap.c - CPCAP-specific functions for the OPP code |
| * |
| * Adapted from Motorola Mapphone Android Linux kernel |
| * Copyright (C) 2011 Motorola, Inc. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| |
| #include "soc.h" |
| #include "pm.h" |
| #include "voltage.h" |
| |
| #include <linux/init.h> |
| #include "vc.h" |
| |
| /** |
| * omap_cpcap_vsel_to_uv - convert CPCAP VSEL value to microvolts DC |
| * @vsel: CPCAP VSEL value to convert |
| * |
| * Returns: the microvolts DC that the CPCAP PMIC should generate when |
| * programmed with @vsel. |
| */ |
| static unsigned long omap_cpcap_vsel_to_uv(unsigned char vsel) |
| { |
| if (vsel > 0x44) |
| vsel = 0x44; |
| return (((vsel * 125) + 6000)) * 100; |
| } |
| |
| /** |
| * omap_cpcap_uv_to_vsel - convert microvolts DC to CPCAP VSEL value |
| * @uv: microvolts DC to convert |
| * |
| * Returns: the VSEL value necessary for the CPCAP PMIC to |
| * generate an output voltage equal to or greater than @uv microvolts DC. |
| */ |
| static unsigned char omap_cpcap_uv_to_vsel(unsigned long uv) |
| { |
| if (uv < 600000) |
| uv = 600000; |
| else if (uv > 1450000) |
| uv = 1450000; |
| return DIV_ROUND_UP(uv - 600000, 12500); |
| } |
| |
| static struct omap_voltdm_pmic omap_cpcap_core = { |
| .slew_rate = 4000, |
| .step_size = 12500, |
| .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, |
| .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, |
| .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, |
| .vddmin = 900000, |
| .vddmax = 1350000, |
| .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, |
| .i2c_slave_addr = 0x02, |
| .volt_reg_addr = 0x00, |
| .cmd_reg_addr = 0x01, |
| .i2c_high_speed = false, |
| .vsel_to_uv = omap_cpcap_vsel_to_uv, |
| .uv_to_vsel = omap_cpcap_uv_to_vsel, |
| }; |
| |
| static struct omap_voltdm_pmic omap_cpcap_iva = { |
| .slew_rate = 4000, |
| .step_size = 12500, |
| .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, |
| .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, |
| .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, |
| .vddmin = 900000, |
| .vddmax = 1375000, |
| .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, |
| .i2c_slave_addr = 0x44, |
| .volt_reg_addr = 0x0, |
| .cmd_reg_addr = 0x01, |
| .i2c_high_speed = false, |
| .vsel_to_uv = omap_cpcap_vsel_to_uv, |
| .uv_to_vsel = omap_cpcap_uv_to_vsel, |
| }; |
| |
| /** |
| * omap_max8952_vsel_to_uv - convert MAX8952 VSEL value to microvolts DC |
| * @vsel: MAX8952 VSEL value to convert |
| * |
| * Returns: the microvolts DC that the MAX8952 Regulator should generate when |
| * programmed with @vsel. |
| */ |
| static unsigned long omap_max8952_vsel_to_uv(unsigned char vsel) |
| { |
| if (vsel > 0x3F) |
| vsel = 0x3F; |
| return (((vsel * 100) + 7700)) * 100; |
| } |
| |
| /** |
| * omap_max8952_uv_to_vsel - convert microvolts DC to MAX8952 VSEL value |
| * @uv: microvolts DC to convert |
| * |
| * Returns: the VSEL value necessary for the MAX8952 Regulator to |
| * generate an output voltage equal to or greater than @uv microvolts DC. |
| */ |
| static unsigned char omap_max8952_uv_to_vsel(unsigned long uv) |
| { |
| if (uv < 770000) |
| uv = 770000; |
| else if (uv > 1400000) |
| uv = 1400000; |
| return DIV_ROUND_UP(uv - 770000, 10000); |
| } |
| |
| static struct omap_voltdm_pmic omap443x_max8952_mpu = { |
| .slew_rate = 16000, |
| .step_size = 10000, |
| .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, |
| .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, |
| .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, |
| .vddmin = 900000, |
| .vddmax = 1400000, |
| .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, |
| .i2c_slave_addr = 0x60, |
| .volt_reg_addr = 0x03, |
| .cmd_reg_addr = 0x03, |
| .i2c_high_speed = false, |
| .vsel_to_uv = omap_max8952_vsel_to_uv, |
| .uv_to_vsel = omap_max8952_uv_to_vsel, |
| }; |
| |
| /** |
| * omap_fan535503_vsel_to_uv - convert FAN535503 VSEL value to microvolts DC |
| * @vsel: FAN535503 VSEL value to convert |
| * |
| * Returns: the microvolts DC that the FAN535503 Regulator should generate when |
| * programmed with @vsel. |
| */ |
| static unsigned long omap_fan535503_vsel_to_uv(unsigned char vsel) |
| { |
| /* Extract bits[5:0] */ |
| vsel &= 0x3F; |
| |
| return (((vsel * 125) + 7500)) * 100; |
| } |
| |
| /** |
| * omap_fan535508_vsel_to_uv - convert FAN535508 VSEL value to microvolts DC |
| * @vsel: FAN535508 VSEL value to convert |
| * |
| * Returns: the microvolts DC that the FAN535508 Regulator should generate when |
| * programmed with @vsel. |
| */ |
| static unsigned long omap_fan535508_vsel_to_uv(unsigned char vsel) |
| { |
| /* Extract bits[5:0] */ |
| vsel &= 0x3F; |
| |
| if (vsel > 0x37) |
| vsel = 0x37; |
| return (((vsel * 125) + 7500)) * 100; |
| } |
| |
| |
| /** |
| * omap_fan535503_uv_to_vsel - convert microvolts DC to FAN535503 VSEL value |
| * @uv: microvolts DC to convert |
| * |
| * Returns: the VSEL value necessary for the MAX8952 Regulator to |
| * generate an output voltage equal to or greater than @uv microvolts DC. |
| */ |
| static unsigned char omap_fan535503_uv_to_vsel(unsigned long uv) |
| { |
| unsigned char vsel; |
| if (uv < 750000) |
| uv = 750000; |
| else if (uv > 1537500) |
| uv = 1537500; |
| |
| vsel = DIV_ROUND_UP(uv - 750000, 12500); |
| return vsel | 0xC0; |
| } |
| |
| /** |
| * omap_fan535508_uv_to_vsel - convert microvolts DC to FAN535508 VSEL value |
| * @uv: microvolts DC to convert |
| * |
| * Returns: the VSEL value necessary for the MAX8952 Regulator to |
| * generate an output voltage equal to or greater than @uv microvolts DC. |
| */ |
| static unsigned char omap_fan535508_uv_to_vsel(unsigned long uv) |
| { |
| unsigned char vsel; |
| if (uv < 750000) |
| uv = 750000; |
| else if (uv > 1437500) |
| uv = 1437500; |
| |
| vsel = DIV_ROUND_UP(uv - 750000, 12500); |
| return vsel | 0xC0; |
| } |
| |
| /* fan5335-core */ |
| static struct omap_voltdm_pmic omap4_fan_core = { |
| .slew_rate = 4000, |
| .step_size = 12500, |
| .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, |
| .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, |
| .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, |
| .vddmin = 850000, |
| .vddmax = 1375000, |
| .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, |
| .i2c_slave_addr = 0x4A, |
| .i2c_high_speed = false, |
| .volt_reg_addr = 0x01, |
| .cmd_reg_addr = 0x01, |
| .vsel_to_uv = omap_fan535508_vsel_to_uv, |
| .uv_to_vsel = omap_fan535508_uv_to_vsel, |
| }; |
| |
| /* fan5335 iva */ |
| static struct omap_voltdm_pmic omap4_fan_iva = { |
| .slew_rate = 4000, |
| .step_size = 12500, |
| .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, |
| .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, |
| .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, |
| .vddmin = 850000, |
| .vddmax = 1375000, |
| .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, |
| .i2c_slave_addr = 0x48, |
| .volt_reg_addr = 0x01, |
| .cmd_reg_addr = 0x01, |
| .i2c_high_speed = false, |
| .vsel_to_uv = omap_fan535503_vsel_to_uv, |
| .uv_to_vsel = omap_fan535503_uv_to_vsel, |
| }; |
| |
| int __init omap4_cpcap_init(void) |
| { |
| struct voltagedomain *voltdm; |
| |
| if (!of_find_compatible_node(NULL, NULL, "motorola,cpcap")) |
| return -ENODEV; |
| |
| voltdm = voltdm_lookup("mpu"); |
| omap_voltage_register_pmic(voltdm, &omap443x_max8952_mpu); |
| |
| if (of_machine_is_compatible("motorola,droid-bionic")) { |
| voltdm = voltdm_lookup("core"); |
| omap_voltage_register_pmic(voltdm, &omap_cpcap_core); |
| |
| voltdm = voltdm_lookup("iva"); |
| omap_voltage_register_pmic(voltdm, &omap_cpcap_iva); |
| } else { |
| voltdm = voltdm_lookup("core"); |
| omap_voltage_register_pmic(voltdm, &omap4_fan_core); |
| |
| voltdm = voltdm_lookup("iva"); |
| omap_voltage_register_pmic(voltdm, &omap4_fan_iva); |
| } |
| |
| return 0; |
| } |
| |
| static int __init cpcap_late_init(void) |
| { |
| omap4_vc_set_pmic_signaling(PWRDM_POWER_RET); |
| |
| return 0; |
| } |
| omap_late_initcall(cpcap_late_init); |
