| /* |
| * Afatech AF9013 demodulator driver |
| * |
| * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> |
| * |
| * Thanks to Afatech who kindly provided information. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/firmware.h> |
| |
| #include "dvb_frontend.h" |
| #include "af9013_priv.h" |
| #include "af9013.h" |
| |
| int af9013_debug; |
| |
| struct af9013_state { |
| struct i2c_adapter *i2c; |
| struct dvb_frontend frontend; |
| |
| struct af9013_config config; |
| |
| /* tuner/demod RF and IF AGC limits used for signal strength calc */ |
| u8 signal_strength_en, rf_50, rf_80, if_50, if_80; |
| u16 signal_strength; |
| u32 ber; |
| u32 ucblocks; |
| u16 snr; |
| u32 frequency; |
| unsigned long next_statistics_check; |
| }; |
| |
| static u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff }; |
| |
| static int af9013_write_regs(struct af9013_state *state, u8 mbox, u16 reg, |
| u8 *val, u8 len) |
| { |
| u8 buf[3+len]; |
| struct i2c_msg msg = { |
| .addr = state->config.demod_address, |
| .flags = 0, |
| .len = sizeof(buf), |
| .buf = buf }; |
| |
| buf[0] = reg >> 8; |
| buf[1] = reg & 0xff; |
| buf[2] = mbox; |
| memcpy(&buf[3], val, len); |
| |
| if (i2c_transfer(state->i2c, &msg, 1) != 1) { |
| warn("I2C write failed reg:%04x len:%d", reg, len); |
| return -EREMOTEIO; |
| } |
| return 0; |
| } |
| |
| static int af9013_write_ofdm_regs(struct af9013_state *state, u16 reg, u8 *val, |
| u8 len) |
| { |
| u8 mbox = (1 << 0)|(1 << 1)|((len - 1) << 2)|(0 << 6)|(0 << 7); |
| return af9013_write_regs(state, mbox, reg, val, len); |
| } |
| |
| static int af9013_write_ofsm_regs(struct af9013_state *state, u16 reg, u8 *val, |
| u8 len) |
| { |
| u8 mbox = (1 << 0)|(1 << 1)|((len - 1) << 2)|(1 << 6)|(1 << 7); |
| return af9013_write_regs(state, mbox, reg, val, len); |
| } |
| |
| /* write single register */ |
| static int af9013_write_reg(struct af9013_state *state, u16 reg, u8 val) |
| { |
| return af9013_write_ofdm_regs(state, reg, &val, 1); |
| } |
| |
| /* read single register */ |
| static int af9013_read_reg(struct af9013_state *state, u16 reg, u8 *val) |
| { |
| u8 obuf[3] = { reg >> 8, reg & 0xff, 0 }; |
| u8 ibuf[1]; |
| struct i2c_msg msg[2] = { |
| { |
| .addr = state->config.demod_address, |
| .flags = 0, |
| .len = sizeof(obuf), |
| .buf = obuf |
| }, { |
| .addr = state->config.demod_address, |
| .flags = I2C_M_RD, |
| .len = sizeof(ibuf), |
| .buf = ibuf |
| } |
| }; |
| |
| if (i2c_transfer(state->i2c, msg, 2) != 2) { |
| warn("I2C read failed reg:%04x", reg); |
| return -EREMOTEIO; |
| } |
| *val = ibuf[0]; |
| return 0; |
| } |
| |
| static int af9013_write_reg_bits(struct af9013_state *state, u16 reg, u8 pos, |
| u8 len, u8 val) |
| { |
| int ret; |
| u8 tmp, mask; |
| |
| ret = af9013_read_reg(state, reg, &tmp); |
| if (ret) |
| return ret; |
| |
| mask = regmask[len - 1] << pos; |
| tmp = (tmp & ~mask) | ((val << pos) & mask); |
| |
| return af9013_write_reg(state, reg, tmp); |
| } |
| |
| static int af9013_read_reg_bits(struct af9013_state *state, u16 reg, u8 pos, |
| u8 len, u8 *val) |
| { |
| int ret; |
| u8 tmp; |
| |
| ret = af9013_read_reg(state, reg, &tmp); |
| if (ret) |
| return ret; |
| *val = (tmp >> pos) & regmask[len - 1]; |
| return 0; |
| } |
| |
| static int af9013_set_gpio(struct af9013_state *state, u8 gpio, u8 gpioval) |
| { |
| int ret; |
| u8 pos; |
| u16 addr; |
| deb_info("%s: gpio:%d gpioval:%02x\n", __func__, gpio, gpioval); |
| |
| /* GPIO0 & GPIO1 0xd735 |
| GPIO2 & GPIO3 0xd736 */ |
| |
| switch (gpio) { |
| case 0: |
| case 1: |
| addr = 0xd735; |
| break; |
| case 2: |
| case 3: |
| addr = 0xd736; |
| break; |
| |
| default: |
| err("invalid gpio:%d\n", gpio); |
| ret = -EINVAL; |
| goto error; |
| }; |
| |
| switch (gpio) { |
| case 0: |
| case 2: |
| pos = 0; |
| break; |
| case 1: |
| case 3: |
| default: |
| pos = 4; |
| break; |
| }; |
| |
| ret = af9013_write_reg_bits(state, addr, pos, 4, gpioval); |
| |
| error: |
| return ret; |
| } |
| |
| static u32 af913_div(u32 a, u32 b, u32 x) |
| { |
| u32 r = 0, c = 0, i; |
| deb_info("%s: a:%d b:%d x:%d\n", __func__, a, b, x); |
| |
| if (a > b) { |
| c = a / b; |
| a = a - c * b; |
| } |
| |
| for (i = 0; i < x; i++) { |
| if (a >= b) { |
| r += 1; |
| a -= b; |
| } |
| a <<= 1; |
| r <<= 1; |
| } |
| r = (c << (u32)x) + r; |
| |
| deb_info("%s: a:%d b:%d x:%d r:%d r:%x\n", __func__, a, b, x, r, r); |
| return r; |
| } |
| |
| static int af9013_set_coeff(struct af9013_state *state, fe_bandwidth_t bw) |
| { |
| int ret, i, j, found; |
| deb_info("%s: adc_clock:%d bw:%d\n", __func__, |
| state->config.adc_clock, bw); |
| |
| /* lookup coeff from table */ |
| for (i = 0, found = 0; i < ARRAY_SIZE(coeff_table); i++) { |
| if (coeff_table[i].adc_clock == state->config.adc_clock && |
| coeff_table[i].bw == bw) { |
| found = 1; |
| break; |
| } |
| } |
| |
| if (!found) { |
| err("invalid bw or clock"); |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| deb_info("%s: coeff: ", __func__); |
| debug_dump(coeff_table[i].val, sizeof(coeff_table[i].val), deb_info); |
| |
| /* program */ |
| for (j = 0; j < sizeof(coeff_table[i].val); j++) { |
| ret = af9013_write_reg(state, 0xae00 + j, |
| coeff_table[i].val[j]); |
| if (ret) |
| break; |
| } |
| |
| error: |
| return ret; |
| } |
| |
| static int af9013_set_adc_ctrl(struct af9013_state *state) |
| { |
| int ret; |
| u8 buf[3], tmp, i; |
| u32 adc_cw; |
| |
| deb_info("%s: adc_clock:%d\n", __func__, state->config.adc_clock); |
| |
| /* adc frequency type */ |
| switch (state->config.adc_clock) { |
| case 28800: /* 28.800 MHz */ |
| tmp = 0; |
| break; |
| case 20480: /* 20.480 MHz */ |
| tmp = 1; |
| break; |
| case 28000: /* 28.000 MHz */ |
| tmp = 2; |
| break; |
| case 25000: /* 25.000 MHz */ |
| tmp = 3; |
| break; |
| default: |
| err("invalid xtal"); |
| return -EINVAL; |
| } |
| |
| adc_cw = af913_div(state->config.adc_clock*1000, 1000000ul, 19ul); |
| |
| buf[0] = (u8) ((adc_cw & 0x000000ff)); |
| buf[1] = (u8) ((adc_cw & 0x0000ff00) >> 8); |
| buf[2] = (u8) ((adc_cw & 0x00ff0000) >> 16); |
| |
| deb_info("%s: adc_cw:", __func__); |
| debug_dump(buf, sizeof(buf), deb_info); |
| |
| /* program */ |
| for (i = 0; i < sizeof(buf); i++) { |
| ret = af9013_write_reg(state, 0xd180 + i, buf[i]); |
| if (ret) |
| goto error; |
| } |
| ret = af9013_write_reg_bits(state, 0x9bd2, 0, 4, tmp); |
| error: |
| return ret; |
| } |
| |
| static int af9013_set_freq_ctrl(struct af9013_state *state, fe_bandwidth_t bw) |
| { |
| int ret; |
| u16 addr; |
| u8 buf[3], i, j; |
| u32 adc_freq, freq_cw; |
| s8 bfs_spec_inv; |
| int if_sample_freq; |
| |
| for (j = 0; j < 3; j++) { |
| if (j == 0) { |
| addr = 0xd140; /* fcw normal */ |
| bfs_spec_inv = state->config.rf_spec_inv ? -1 : 1; |
| } else if (j == 1) { |
| addr = 0x9be7; /* fcw dummy ram */ |
| bfs_spec_inv = state->config.rf_spec_inv ? -1 : 1; |
| } else { |
| addr = 0x9bea; /* fcw inverted */ |
| bfs_spec_inv = state->config.rf_spec_inv ? 1 : -1; |
| } |
| |
| adc_freq = state->config.adc_clock * 1000; |
| if_sample_freq = state->config.tuner_if * 1000; |
| |
| /* TDA18271 uses different sampling freq for every bw */ |
| if (state->config.tuner == AF9013_TUNER_TDA18271) { |
| switch (bw) { |
| case BANDWIDTH_6_MHZ: |
| if_sample_freq = 3300000; /* 3.3 MHz */ |
| break; |
| case BANDWIDTH_7_MHZ: |
| if_sample_freq = 3800000; /* 3.8 MHz */ |
| break; |
| case BANDWIDTH_8_MHZ: |
| default: |
| if_sample_freq = 4300000; /* 4.3 MHz */ |
| break; |
| } |
| } else if (state->config.tuner == AF9013_TUNER_TDA18218) { |
| switch (bw) { |
| case BANDWIDTH_6_MHZ: |
| if_sample_freq = 3000000; /* 3 MHz */ |
| break; |
| case BANDWIDTH_7_MHZ: |
| if_sample_freq = 3500000; /* 3.5 MHz */ |
| break; |
| case BANDWIDTH_8_MHZ: |
| default: |
| if_sample_freq = 4000000; /* 4 MHz */ |
| break; |
| } |
| } |
| |
| while (if_sample_freq > (adc_freq / 2)) |
| if_sample_freq = if_sample_freq - adc_freq; |
| |
| if (if_sample_freq >= 0) |
| bfs_spec_inv = bfs_spec_inv * (-1); |
| else |
| if_sample_freq = if_sample_freq * (-1); |
| |
| freq_cw = af913_div(if_sample_freq, adc_freq, 23ul); |
| |
| if (bfs_spec_inv == -1) |
| freq_cw = 0x00800000 - freq_cw; |
| |
| buf[0] = (u8) ((freq_cw & 0x000000ff)); |
| buf[1] = (u8) ((freq_cw & 0x0000ff00) >> 8); |
| buf[2] = (u8) ((freq_cw & 0x007f0000) >> 16); |
| |
| |
| deb_info("%s: freq_cw:", __func__); |
| debug_dump(buf, sizeof(buf), deb_info); |
| |
| /* program */ |
| for (i = 0; i < sizeof(buf); i++) { |
| ret = af9013_write_reg(state, addr++, buf[i]); |
| if (ret) |
| goto error; |
| } |
| } |
| error: |
| return ret; |
| } |
| |
| static int af9013_set_ofdm_params(struct af9013_state *state, |
| struct dvb_ofdm_parameters *params, u8 *auto_mode) |
| { |
| int ret; |
| u8 i, buf[3] = {0, 0, 0}; |
| *auto_mode = 0; /* set if parameters are requested to auto set */ |
| |
| /* Try auto-detect transmission parameters in case of AUTO requested or |
| garbage parameters given by application for compatibility. |
| MPlayer seems to provide garbage parameters currently. */ |
| |
| switch (params->transmission_mode) { |
| case TRANSMISSION_MODE_AUTO: |
| *auto_mode = 1; |
| case TRANSMISSION_MODE_2K: |
| break; |
| case TRANSMISSION_MODE_8K: |
| buf[0] |= (1 << 0); |
| break; |
| default: |
| deb_info("%s: invalid transmission_mode\n", __func__); |
| *auto_mode = 1; |
| } |
| |
| switch (params->guard_interval) { |
| case GUARD_INTERVAL_AUTO: |
| *auto_mode = 1; |
| case GUARD_INTERVAL_1_32: |
| break; |
| case GUARD_INTERVAL_1_16: |
| buf[0] |= (1 << 2); |
| break; |
| case GUARD_INTERVAL_1_8: |
| buf[0] |= (2 << 2); |
| break; |
| case GUARD_INTERVAL_1_4: |
| buf[0] |= (3 << 2); |
| break; |
| default: |
| deb_info("%s: invalid guard_interval\n", __func__); |
| *auto_mode = 1; |
| } |
| |
| switch (params->hierarchy_information) { |
| case HIERARCHY_AUTO: |
| *auto_mode = 1; |
| case HIERARCHY_NONE: |
| break; |
| case HIERARCHY_1: |
| buf[0] |= (1 << 4); |
| break; |
| case HIERARCHY_2: |
| buf[0] |= (2 << 4); |
| break; |
| case HIERARCHY_4: |
| buf[0] |= (3 << 4); |
| break; |
| default: |
| deb_info("%s: invalid hierarchy_information\n", __func__); |
| *auto_mode = 1; |
| }; |
| |
| switch (params->constellation) { |
| case QAM_AUTO: |
| *auto_mode = 1; |
| case QPSK: |
| break; |
| case QAM_16: |
| buf[1] |= (1 << 6); |
| break; |
| case QAM_64: |
| buf[1] |= (2 << 6); |
| break; |
| default: |
| deb_info("%s: invalid constellation\n", __func__); |
| *auto_mode = 1; |
| } |
| |
| /* Use HP. How and which case we can switch to LP? */ |
| buf[1] |= (1 << 4); |
| |
| switch (params->code_rate_HP) { |
| case FEC_AUTO: |
| *auto_mode = 1; |
| case FEC_1_2: |
| break; |
| case FEC_2_3: |
| buf[2] |= (1 << 0); |
| break; |
| case FEC_3_4: |
| buf[2] |= (2 << 0); |
| break; |
| case FEC_5_6: |
| buf[2] |= (3 << 0); |
| break; |
| case FEC_7_8: |
| buf[2] |= (4 << 0); |
| break; |
| default: |
| deb_info("%s: invalid code_rate_HP\n", __func__); |
| *auto_mode = 1; |
| } |
| |
| switch (params->code_rate_LP) { |
| case FEC_AUTO: |
| /* if HIERARCHY_NONE and FEC_NONE then LP FEC is set to FEC_AUTO |
| by dvb_frontend.c for compatibility */ |
| if (params->hierarchy_information != HIERARCHY_NONE) |
| *auto_mode = 1; |
| case FEC_1_2: |
| break; |
| case FEC_2_3: |
| buf[2] |= (1 << 3); |
| break; |
| case FEC_3_4: |
| buf[2] |= (2 << 3); |
| break; |
| case FEC_5_6: |
| buf[2] |= (3 << 3); |
| break; |
| case FEC_7_8: |
| buf[2] |= (4 << 3); |
| break; |
| case FEC_NONE: |
| if (params->hierarchy_information == HIERARCHY_AUTO) |
| break; |
| default: |
| deb_info("%s: invalid code_rate_LP\n", __func__); |
| *auto_mode = 1; |
| } |
| |
| switch (params->bandwidth) { |
| case BANDWIDTH_6_MHZ: |
| break; |
| case BANDWIDTH_7_MHZ: |
| buf[1] |= (1 << 2); |
| break; |
| case BANDWIDTH_8_MHZ: |
| buf[1] |= (2 << 2); |
| break; |
| default: |
| deb_info("%s: invalid bandwidth\n", __func__); |
| buf[1] |= (2 << 2); /* cannot auto-detect BW, try 8 MHz */ |
| } |
| |
| /* program */ |
| for (i = 0; i < sizeof(buf); i++) { |
| ret = af9013_write_reg(state, 0xd3c0 + i, buf[i]); |
| if (ret) |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int af9013_reset(struct af9013_state *state, u8 sleep) |
| { |
| int ret; |
| u8 tmp, i; |
| deb_info("%s\n", __func__); |
| |
| /* enable OFDM reset */ |
| ret = af9013_write_reg_bits(state, 0xd417, 4, 1, 1); |
| if (ret) |
| goto error; |
| |
| /* start reset mechanism */ |
| ret = af9013_write_reg(state, 0xaeff, 1); |
| if (ret) |
| goto error; |
| |
| /* reset is done when bit 1 is set */ |
| for (i = 0; i < 150; i++) { |
| ret = af9013_read_reg_bits(state, 0xd417, 1, 1, &tmp); |
| if (ret) |
| goto error; |
| if (tmp) |
| break; /* reset done */ |
| msleep(10); |
| } |
| if (!tmp) |
| return -ETIMEDOUT; |
| |
| /* don't clear reset when going to sleep */ |
| if (!sleep) { |
| /* clear OFDM reset */ |
| ret = af9013_write_reg_bits(state, 0xd417, 1, 1, 0); |
| if (ret) |
| goto error; |
| |
| /* disable OFDM reset */ |
| ret = af9013_write_reg_bits(state, 0xd417, 4, 1, 0); |
| } |
| error: |
| return ret; |
| } |
| |
| static int af9013_power_ctrl(struct af9013_state *state, u8 onoff) |
| { |
| int ret; |
| deb_info("%s: onoff:%d\n", __func__, onoff); |
| |
| if (onoff) { |
| /* power on */ |
| ret = af9013_write_reg_bits(state, 0xd73a, 3, 1, 0); |
| if (ret) |
| goto error; |
| ret = af9013_write_reg_bits(state, 0xd417, 1, 1, 0); |
| if (ret) |
| goto error; |
| ret = af9013_write_reg_bits(state, 0xd417, 4, 1, 0); |
| } else { |
| /* power off */ |
| ret = af9013_reset(state, 1); |
| if (ret) |
| goto error; |
| ret = af9013_write_reg_bits(state, 0xd73a, 3, 1, 1); |
| } |
| error: |
| return ret; |
| } |
| |
| static int af9013_lock_led(struct af9013_state *state, u8 onoff) |
| { |
| deb_info("%s: onoff:%d\n", __func__, onoff); |
| |
| return af9013_write_reg_bits(state, 0xd730, 0, 1, onoff); |
| } |
| |
| static int af9013_set_frontend(struct dvb_frontend *fe, |
| struct dvb_frontend_parameters *params) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret; |
| u8 auto_mode; /* auto set TPS */ |
| |
| deb_info("%s: freq:%d bw:%d\n", __func__, params->frequency, |
| params->u.ofdm.bandwidth); |
| |
| state->frequency = params->frequency; |
| |
| /* program tuner */ |
| if (fe->ops.tuner_ops.set_params) |
| fe->ops.tuner_ops.set_params(fe, params); |
| |
| /* program CFOE coefficients */ |
| ret = af9013_set_coeff(state, params->u.ofdm.bandwidth); |
| if (ret) |
| goto error; |
| |
| /* program frequency control */ |
| ret = af9013_set_freq_ctrl(state, params->u.ofdm.bandwidth); |
| if (ret) |
| goto error; |
| |
| /* clear TPS lock flag (inverted flag) */ |
| ret = af9013_write_reg_bits(state, 0xd330, 3, 1, 1); |
| if (ret) |
| goto error; |
| |
| /* clear MPEG2 lock flag */ |
| ret = af9013_write_reg_bits(state, 0xd507, 6, 1, 0); |
| if (ret) |
| goto error; |
| |
| /* empty channel function */ |
| ret = af9013_write_reg_bits(state, 0x9bfe, 0, 1, 0); |
| if (ret) |
| goto error; |
| |
| /* empty DVB-T channel function */ |
| ret = af9013_write_reg_bits(state, 0x9bc2, 0, 1, 0); |
| if (ret) |
| goto error; |
| |
| /* program TPS and bandwidth, check if auto mode needed */ |
| ret = af9013_set_ofdm_params(state, ¶ms->u.ofdm, &auto_mode); |
| if (ret) |
| goto error; |
| |
| if (auto_mode) { |
| /* clear easy mode flag */ |
| ret = af9013_write_reg(state, 0xaefd, 0); |
| deb_info("%s: auto TPS\n", __func__); |
| } else { |
| /* set easy mode flag */ |
| ret = af9013_write_reg(state, 0xaefd, 1); |
| if (ret) |
| goto error; |
| ret = af9013_write_reg(state, 0xaefe, 0); |
| deb_info("%s: manual TPS\n", __func__); |
| } |
| if (ret) |
| goto error; |
| |
| /* everything is set, lets try to receive channel - OFSM GO! */ |
| ret = af9013_write_reg(state, 0xffff, 0); |
| if (ret) |
| goto error; |
| |
| error: |
| return ret; |
| } |
| |
| static int af9013_get_frontend(struct dvb_frontend *fe, |
| struct dvb_frontend_parameters *p) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret; |
| u8 i, buf[3]; |
| deb_info("%s\n", __func__); |
| |
| /* read TPS registers */ |
| for (i = 0; i < 3; i++) { |
| ret = af9013_read_reg(state, 0xd3c0 + i, &buf[i]); |
| if (ret) |
| goto error; |
| } |
| |
| switch ((buf[1] >> 6) & 3) { |
| case 0: |
| p->u.ofdm.constellation = QPSK; |
| break; |
| case 1: |
| p->u.ofdm.constellation = QAM_16; |
| break; |
| case 2: |
| p->u.ofdm.constellation = QAM_64; |
| break; |
| } |
| |
| switch ((buf[0] >> 0) & 3) { |
| case 0: |
| p->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K; |
| break; |
| case 1: |
| p->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K; |
| } |
| |
| switch ((buf[0] >> 2) & 3) { |
| case 0: |
| p->u.ofdm.guard_interval = GUARD_INTERVAL_1_32; |
| break; |
| case 1: |
| p->u.ofdm.guard_interval = GUARD_INTERVAL_1_16; |
| break; |
| case 2: |
| p->u.ofdm.guard_interval = GUARD_INTERVAL_1_8; |
| break; |
| case 3: |
| p->u.ofdm.guard_interval = GUARD_INTERVAL_1_4; |
| break; |
| } |
| |
| switch ((buf[0] >> 4) & 7) { |
| case 0: |
| p->u.ofdm.hierarchy_information = HIERARCHY_NONE; |
| break; |
| case 1: |
| p->u.ofdm.hierarchy_information = HIERARCHY_1; |
| break; |
| case 2: |
| p->u.ofdm.hierarchy_information = HIERARCHY_2; |
| break; |
| case 3: |
| p->u.ofdm.hierarchy_information = HIERARCHY_4; |
| break; |
| } |
| |
| switch ((buf[2] >> 0) & 7) { |
| case 0: |
| p->u.ofdm.code_rate_HP = FEC_1_2; |
| break; |
| case 1: |
| p->u.ofdm.code_rate_HP = FEC_2_3; |
| break; |
| case 2: |
| p->u.ofdm.code_rate_HP = FEC_3_4; |
| break; |
| case 3: |
| p->u.ofdm.code_rate_HP = FEC_5_6; |
| break; |
| case 4: |
| p->u.ofdm.code_rate_HP = FEC_7_8; |
| break; |
| } |
| |
| switch ((buf[2] >> 3) & 7) { |
| case 0: |
| p->u.ofdm.code_rate_LP = FEC_1_2; |
| break; |
| case 1: |
| p->u.ofdm.code_rate_LP = FEC_2_3; |
| break; |
| case 2: |
| p->u.ofdm.code_rate_LP = FEC_3_4; |
| break; |
| case 3: |
| p->u.ofdm.code_rate_LP = FEC_5_6; |
| break; |
| case 4: |
| p->u.ofdm.code_rate_LP = FEC_7_8; |
| break; |
| } |
| |
| switch ((buf[1] >> 2) & 3) { |
| case 0: |
| p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ; |
| break; |
| case 1: |
| p->u.ofdm.bandwidth = BANDWIDTH_7_MHZ; |
| break; |
| case 2: |
| p->u.ofdm.bandwidth = BANDWIDTH_8_MHZ; |
| break; |
| } |
| |
| p->inversion = INVERSION_AUTO; |
| p->frequency = state->frequency; |
| |
| error: |
| return ret; |
| } |
| |
| static int af9013_update_ber_unc(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret; |
| u8 buf[3], i; |
| u32 error_bit_count = 0; |
| u32 total_bit_count = 0; |
| u32 abort_packet_count = 0; |
| |
| state->ber = 0; |
| |
| /* check if error bit count is ready */ |
| ret = af9013_read_reg_bits(state, 0xd391, 4, 1, &buf[0]); |
| if (ret) |
| goto error; |
| if (!buf[0]) |
| goto exit; |
| |
| /* get RSD packet abort count */ |
| for (i = 0; i < 2; i++) { |
| ret = af9013_read_reg(state, 0xd38a + i, &buf[i]); |
| if (ret) |
| goto error; |
| } |
| abort_packet_count = (buf[1] << 8) + buf[0]; |
| |
| /* get error bit count */ |
| for (i = 0; i < 3; i++) { |
| ret = af9013_read_reg(state, 0xd387 + i, &buf[i]); |
| if (ret) |
| goto error; |
| } |
| error_bit_count = (buf[2] << 16) + (buf[1] << 8) + buf[0]; |
| error_bit_count = error_bit_count - abort_packet_count * 8 * 8; |
| |
| /* get used RSD counting period (10000 RSD packets used) */ |
| for (i = 0; i < 2; i++) { |
| ret = af9013_read_reg(state, 0xd385 + i, &buf[i]); |
| if (ret) |
| goto error; |
| } |
| total_bit_count = (buf[1] << 8) + buf[0]; |
| total_bit_count = total_bit_count - abort_packet_count; |
| total_bit_count = total_bit_count * 204 * 8; |
| |
| if (total_bit_count) |
| state->ber = error_bit_count * 1000000000 / total_bit_count; |
| |
| state->ucblocks += abort_packet_count; |
| |
| deb_info("%s: err bits:%d total bits:%d abort count:%d\n", __func__, |
| error_bit_count, total_bit_count, abort_packet_count); |
| |
| /* set BER counting range */ |
| ret = af9013_write_reg(state, 0xd385, 10000 & 0xff); |
| if (ret) |
| goto error; |
| ret = af9013_write_reg(state, 0xd386, 10000 >> 8); |
| if (ret) |
| goto error; |
| /* reset and start BER counter */ |
| ret = af9013_write_reg_bits(state, 0xd391, 4, 1, 1); |
| if (ret) |
| goto error; |
| |
| exit: |
| error: |
| return ret; |
| } |
| |
| static int af9013_update_snr(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret; |
| u8 buf[3], i, len; |
| u32 quant = 0; |
| struct snr_table *uninitialized_var(snr_table); |
| |
| /* check if quantizer ready (for snr) */ |
| ret = af9013_read_reg_bits(state, 0xd2e1, 3, 1, &buf[0]); |
| if (ret) |
| goto error; |
| if (buf[0]) { |
| /* quantizer ready - read it */ |
| for (i = 0; i < 3; i++) { |
| ret = af9013_read_reg(state, 0xd2e3 + i, &buf[i]); |
| if (ret) |
| goto error; |
| } |
| quant = (buf[2] << 16) + (buf[1] << 8) + buf[0]; |
| |
| /* read current constellation */ |
| ret = af9013_read_reg(state, 0xd3c1, &buf[0]); |
| if (ret) |
| goto error; |
| |
| switch ((buf[0] >> 6) & 3) { |
| case 0: |
| len = ARRAY_SIZE(qpsk_snr_table); |
| snr_table = qpsk_snr_table; |
| break; |
| case 1: |
| len = ARRAY_SIZE(qam16_snr_table); |
| snr_table = qam16_snr_table; |
| break; |
| case 2: |
| len = ARRAY_SIZE(qam64_snr_table); |
| snr_table = qam64_snr_table; |
| break; |
| default: |
| len = 0; |
| break; |
| } |
| |
| if (len) { |
| for (i = 0; i < len; i++) { |
| if (quant < snr_table[i].val) { |
| state->snr = snr_table[i].snr * 10; |
| break; |
| } |
| } |
| } |
| |
| /* set quantizer super frame count */ |
| ret = af9013_write_reg(state, 0xd2e2, 1); |
| if (ret) |
| goto error; |
| |
| /* check quantizer availability */ |
| for (i = 0; i < 10; i++) { |
| msleep(10); |
| ret = af9013_read_reg_bits(state, 0xd2e6, 0, 1, |
| &buf[0]); |
| if (ret) |
| goto error; |
| if (!buf[0]) |
| break; |
| } |
| |
| /* reset quantizer */ |
| ret = af9013_write_reg_bits(state, 0xd2e1, 3, 1, 1); |
| if (ret) |
| goto error; |
| } |
| |
| error: |
| return ret; |
| } |
| |
| static int af9013_update_signal_strength(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret; |
| u8 rf_gain, if_gain; |
| int signal_strength; |
| |
| deb_info("%s\n", __func__); |
| |
| if (state->signal_strength_en) { |
| ret = af9013_read_reg(state, 0xd07c, &rf_gain); |
| if (ret) |
| goto error; |
| ret = af9013_read_reg(state, 0xd07d, &if_gain); |
| if (ret) |
| goto error; |
| signal_strength = (0xffff / \ |
| (9 * (state->rf_50 + state->if_50) - \ |
| 11 * (state->rf_80 + state->if_80))) * \ |
| (10 * (rf_gain + if_gain) - \ |
| 11 * (state->rf_80 + state->if_80)); |
| if (signal_strength < 0) |
| signal_strength = 0; |
| else if (signal_strength > 0xffff) |
| signal_strength = 0xffff; |
| |
| state->signal_strength = signal_strength; |
| } else { |
| state->signal_strength = 0; |
| } |
| |
| error: |
| return ret; |
| } |
| |
| static int af9013_update_statistics(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret; |
| |
| if (time_before(jiffies, state->next_statistics_check)) |
| return 0; |
| |
| /* set minimum statistic update interval */ |
| state->next_statistics_check = jiffies + msecs_to_jiffies(1200); |
| |
| ret = af9013_update_signal_strength(fe); |
| if (ret) |
| goto error; |
| ret = af9013_update_snr(fe); |
| if (ret) |
| goto error; |
| ret = af9013_update_ber_unc(fe); |
| if (ret) |
| goto error; |
| |
| error: |
| return ret; |
| } |
| |
| static int af9013_get_tune_settings(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *fesettings) |
| { |
| fesettings->min_delay_ms = 800; |
| fesettings->step_size = 0; |
| fesettings->max_drift = 0; |
| |
| return 0; |
| } |
| |
| static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret = 0; |
| u8 tmp; |
| *status = 0; |
| |
| /* MPEG2 lock */ |
| ret = af9013_read_reg_bits(state, 0xd507, 6, 1, &tmp); |
| if (ret) |
| goto error; |
| if (tmp) |
| *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | |
| FE_HAS_SYNC | FE_HAS_LOCK; |
| |
| if (!*status) { |
| /* TPS lock */ |
| ret = af9013_read_reg_bits(state, 0xd330, 3, 1, &tmp); |
| if (ret) |
| goto error; |
| if (tmp) |
| *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | |
| FE_HAS_VITERBI; |
| } |
| |
| if (!*status) { |
| /* CFO lock */ |
| ret = af9013_read_reg_bits(state, 0xd333, 7, 1, &tmp); |
| if (ret) |
| goto error; |
| if (tmp) |
| *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER; |
| } |
| |
| if (!*status) { |
| /* SFOE lock */ |
| ret = af9013_read_reg_bits(state, 0xd334, 6, 1, &tmp); |
| if (ret) |
| goto error; |
| if (tmp) |
| *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER; |
| } |
| |
| if (!*status) { |
| /* AGC lock */ |
| ret = af9013_read_reg_bits(state, 0xd1a0, 6, 1, &tmp); |
| if (ret) |
| goto error; |
| if (tmp) |
| *status |= FE_HAS_SIGNAL; |
| } |
| |
| ret = af9013_update_statistics(fe); |
| |
| error: |
| return ret; |
| } |
| |
| |
| static int af9013_read_ber(struct dvb_frontend *fe, u32 *ber) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret; |
| ret = af9013_update_statistics(fe); |
| *ber = state->ber; |
| return ret; |
| } |
| |
| static int af9013_read_signal_strength(struct dvb_frontend *fe, u16 *strength) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret; |
| ret = af9013_update_statistics(fe); |
| *strength = state->signal_strength; |
| return ret; |
| } |
| |
| static int af9013_read_snr(struct dvb_frontend *fe, u16 *snr) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret; |
| ret = af9013_update_statistics(fe); |
| *snr = state->snr; |
| return ret; |
| } |
| |
| static int af9013_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret; |
| ret = af9013_update_statistics(fe); |
| *ucblocks = state->ucblocks; |
| return ret; |
| } |
| |
| static int af9013_sleep(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret; |
| deb_info("%s\n", __func__); |
| |
| ret = af9013_lock_led(state, 0); |
| if (ret) |
| goto error; |
| |
| ret = af9013_power_ctrl(state, 0); |
| error: |
| return ret; |
| } |
| |
| static int af9013_init(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| int ret, i, len; |
| u8 tmp0, tmp1; |
| struct regdesc *init; |
| deb_info("%s\n", __func__); |
| |
| /* reset OFDM */ |
| ret = af9013_reset(state, 0); |
| if (ret) |
| goto error; |
| |
| /* power on */ |
| ret = af9013_power_ctrl(state, 1); |
| if (ret) |
| goto error; |
| |
| /* enable ADC */ |
| ret = af9013_write_reg(state, 0xd73a, 0xa4); |
| if (ret) |
| goto error; |
| |
| /* write API version to firmware */ |
| for (i = 0; i < sizeof(state->config.api_version); i++) { |
| ret = af9013_write_reg(state, 0x9bf2 + i, |
| state->config.api_version[i]); |
| if (ret) |
| goto error; |
| } |
| |
| /* program ADC control */ |
| ret = af9013_set_adc_ctrl(state); |
| if (ret) |
| goto error; |
| |
| /* set I2C master clock */ |
| ret = af9013_write_reg(state, 0xd416, 0x14); |
| if (ret) |
| goto error; |
| |
| /* set 16 embx */ |
| ret = af9013_write_reg_bits(state, 0xd700, 1, 1, 1); |
| if (ret) |
| goto error; |
| |
| /* set no trigger */ |
| ret = af9013_write_reg_bits(state, 0xd700, 2, 1, 0); |
| if (ret) |
| goto error; |
| |
| /* set read-update bit for constellation */ |
| ret = af9013_write_reg_bits(state, 0xd371, 1, 1, 1); |
| if (ret) |
| goto error; |
| |
| /* enable FEC monitor */ |
| ret = af9013_write_reg_bits(state, 0xd392, 1, 1, 1); |
| if (ret) |
| goto error; |
| |
| /* load OFSM settings */ |
| deb_info("%s: load ofsm settings\n", __func__); |
| len = ARRAY_SIZE(ofsm_init); |
| init = ofsm_init; |
| for (i = 0; i < len; i++) { |
| ret = af9013_write_reg_bits(state, init[i].addr, init[i].pos, |
| init[i].len, init[i].val); |
| if (ret) |
| goto error; |
| } |
| |
| /* load tuner specific settings */ |
| deb_info("%s: load tuner specific settings\n", __func__); |
| switch (state->config.tuner) { |
| case AF9013_TUNER_MXL5003D: |
| len = ARRAY_SIZE(tuner_init_mxl5003d); |
| init = tuner_init_mxl5003d; |
| break; |
| case AF9013_TUNER_MXL5005D: |
| case AF9013_TUNER_MXL5005R: |
| case AF9013_TUNER_MXL5007T: |
| len = ARRAY_SIZE(tuner_init_mxl5005); |
| init = tuner_init_mxl5005; |
| break; |
| case AF9013_TUNER_ENV77H11D5: |
| len = ARRAY_SIZE(tuner_init_env77h11d5); |
| init = tuner_init_env77h11d5; |
| break; |
| case AF9013_TUNER_MT2060: |
| len = ARRAY_SIZE(tuner_init_mt2060); |
| init = tuner_init_mt2060; |
| break; |
| case AF9013_TUNER_MC44S803: |
| len = ARRAY_SIZE(tuner_init_mc44s803); |
| init = tuner_init_mc44s803; |
| break; |
| case AF9013_TUNER_QT1010: |
| case AF9013_TUNER_QT1010A: |
| len = ARRAY_SIZE(tuner_init_qt1010); |
| init = tuner_init_qt1010; |
| break; |
| case AF9013_TUNER_MT2060_2: |
| len = ARRAY_SIZE(tuner_init_mt2060_2); |
| init = tuner_init_mt2060_2; |
| break; |
| case AF9013_TUNER_TDA18271: |
| case AF9013_TUNER_TDA18218: |
| len = ARRAY_SIZE(tuner_init_tda18271); |
| init = tuner_init_tda18271; |
| break; |
| case AF9013_TUNER_UNKNOWN: |
| default: |
| len = ARRAY_SIZE(tuner_init_unknown); |
| init = tuner_init_unknown; |
| break; |
| } |
| |
| for (i = 0; i < len; i++) { |
| ret = af9013_write_reg_bits(state, init[i].addr, init[i].pos, |
| init[i].len, init[i].val); |
| if (ret) |
| goto error; |
| } |
| |
| /* set TS mode */ |
| deb_info("%s: setting ts mode\n", __func__); |
| tmp0 = 0; /* parallel mode */ |
| tmp1 = 0; /* serial mode */ |
| switch (state->config.output_mode) { |
| case AF9013_OUTPUT_MODE_PARALLEL: |
| tmp0 = 1; |
| break; |
| case AF9013_OUTPUT_MODE_SERIAL: |
| tmp1 = 1; |
| break; |
| case AF9013_OUTPUT_MODE_USB: |
| /* usb mode for AF9015 */ |
| default: |
| break; |
| } |
| ret = af9013_write_reg_bits(state, 0xd500, 1, 1, tmp0); /* parallel */ |
| if (ret) |
| goto error; |
| ret = af9013_write_reg_bits(state, 0xd500, 2, 1, tmp1); /* serial */ |
| if (ret) |
| goto error; |
| |
| /* enable lock led */ |
| ret = af9013_lock_led(state, 1); |
| if (ret) |
| goto error; |
| |
| /* read values needed for signal strength calculation */ |
| ret = af9013_read_reg_bits(state, 0x9bee, 0, 1, |
| &state->signal_strength_en); |
| if (ret) |
| goto error; |
| |
| if (state->signal_strength_en) { |
| ret = af9013_read_reg(state, 0x9bbd, &state->rf_50); |
| if (ret) |
| goto error; |
| ret = af9013_read_reg(state, 0x9bd0, &state->rf_80); |
| if (ret) |
| goto error; |
| ret = af9013_read_reg(state, 0x9be2, &state->if_50); |
| if (ret) |
| goto error; |
| ret = af9013_read_reg(state, 0x9be4, &state->if_80); |
| if (ret) |
| goto error; |
| } |
| |
| error: |
| return ret; |
| } |
| |
| static struct dvb_frontend_ops af9013_ops; |
| |
| static int af9013_download_firmware(struct af9013_state *state) |
| { |
| int i, len, packets, remainder, ret; |
| const struct firmware *fw; |
| u16 addr = 0x5100; /* firmware start address */ |
| u16 checksum = 0; |
| u8 val; |
| u8 fw_params[4]; |
| u8 *data; |
| u8 *fw_file = AF9013_DEFAULT_FIRMWARE; |
| |
| msleep(100); |
| /* check whether firmware is already running */ |
| ret = af9013_read_reg(state, 0x98be, &val); |
| if (ret) |
| goto error; |
| else |
| deb_info("%s: firmware status:%02x\n", __func__, val); |
| |
| if (val == 0x0c) /* fw is running, no need for download */ |
| goto exit; |
| |
| info("found a '%s' in cold state, will try to load a firmware", |
| af9013_ops.info.name); |
| |
| /* request the firmware, this will block and timeout */ |
| ret = request_firmware(&fw, fw_file, state->i2c->dev.parent); |
| if (ret) { |
| err("did not find the firmware file. (%s) " |
| "Please see linux/Documentation/dvb/ for more details" \ |
| " on firmware-problems. (%d)", |
| fw_file, ret); |
| goto error; |
| } |
| |
| info("downloading firmware from file '%s'", fw_file); |
| |
| /* calc checksum */ |
| for (i = 0; i < fw->size; i++) |
| checksum += fw->data[i]; |
| |
| fw_params[0] = checksum >> 8; |
| fw_params[1] = checksum & 0xff; |
| fw_params[2] = fw->size >> 8; |
| fw_params[3] = fw->size & 0xff; |
| |
| /* write fw checksum & size */ |
| ret = af9013_write_ofsm_regs(state, 0x50fc, |
| fw_params, sizeof(fw_params)); |
| if (ret) |
| goto error_release; |
| |
| #define FW_PACKET_MAX_DATA 16 |
| |
| packets = fw->size / FW_PACKET_MAX_DATA; |
| remainder = fw->size % FW_PACKET_MAX_DATA; |
| len = FW_PACKET_MAX_DATA; |
| for (i = 0; i <= packets; i++) { |
| if (i == packets) /* set size of the last packet */ |
| len = remainder; |
| |
| data = (u8 *)(fw->data + i * FW_PACKET_MAX_DATA); |
| ret = af9013_write_ofsm_regs(state, addr, data, len); |
| addr += FW_PACKET_MAX_DATA; |
| |
| if (ret) { |
| err("firmware download failed at %d with %d", i, ret); |
| goto error_release; |
| } |
| } |
| |
| /* request boot firmware */ |
| ret = af9013_write_reg(state, 0xe205, 1); |
| if (ret) |
| goto error_release; |
| |
| for (i = 0; i < 15; i++) { |
| msleep(100); |
| |
| /* check firmware status */ |
| ret = af9013_read_reg(state, 0x98be, &val); |
| if (ret) |
| goto error_release; |
| |
| deb_info("%s: firmware status:%02x\n", __func__, val); |
| |
| if (val == 0x0c || val == 0x04) /* success or fail */ |
| break; |
| } |
| |
| if (val == 0x04) { |
| err("firmware did not run"); |
| ret = -1; |
| } else if (val != 0x0c) { |
| err("firmware boot timeout"); |
| ret = -1; |
| } |
| |
| error_release: |
| release_firmware(fw); |
| error: |
| exit: |
| if (!ret) |
| info("found a '%s' in warm state.", af9013_ops.info.name); |
| return ret; |
| } |
| |
| static int af9013_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) |
| { |
| int ret; |
| struct af9013_state *state = fe->demodulator_priv; |
| deb_info("%s: enable:%d\n", __func__, enable); |
| |
| if (state->config.output_mode == AF9013_OUTPUT_MODE_USB) |
| ret = af9013_write_reg_bits(state, 0xd417, 3, 1, enable); |
| else |
| ret = af9013_write_reg_bits(state, 0xd607, 2, 1, enable); |
| |
| return ret; |
| } |
| |
| static void af9013_release(struct dvb_frontend *fe) |
| { |
| struct af9013_state *state = fe->demodulator_priv; |
| kfree(state); |
| } |
| |
| static struct dvb_frontend_ops af9013_ops; |
| |
| struct dvb_frontend *af9013_attach(const struct af9013_config *config, |
| struct i2c_adapter *i2c) |
| { |
| int ret; |
| struct af9013_state *state = NULL; |
| u8 buf[4], i; |
| |
| /* allocate memory for the internal state */ |
| state = kzalloc(sizeof(struct af9013_state), GFP_KERNEL); |
| if (state == NULL) |
| goto error; |
| |
| /* setup the state */ |
| state->i2c = i2c; |
| memcpy(&state->config, config, sizeof(struct af9013_config)); |
| |
| /* chip version */ |
| ret = af9013_read_reg_bits(state, 0xd733, 4, 4, &buf[2]); |
| if (ret) |
| goto error; |
| |
| /* ROM version */ |
| for (i = 0; i < 2; i++) { |
| ret = af9013_read_reg(state, 0x116b + i, &buf[i]); |
| if (ret) |
| goto error; |
| } |
| deb_info("%s: chip version:%d ROM version:%d.%d\n", __func__, |
| buf[2], buf[0], buf[1]); |
| |
| /* download firmware */ |
| if (state->config.output_mode != AF9013_OUTPUT_MODE_USB) { |
| ret = af9013_download_firmware(state); |
| if (ret) |
| goto error; |
| } |
| |
| /* firmware version */ |
| for (i = 0; i < 4; i++) { |
| ret = af9013_read_reg(state, 0x5103 + i, &buf[i]); |
| if (ret) |
| goto error; |
| } |
| info("firmware version:%d.%d.%d.%d", buf[0], buf[1], buf[2], buf[3]); |
| |
| /* settings for mp2if */ |
| if (state->config.output_mode == AF9013_OUTPUT_MODE_USB) { |
| /* AF9015 split PSB to 1.5k + 0.5k */ |
| ret = af9013_write_reg_bits(state, 0xd50b, 2, 1, 1); |
| } else { |
| /* AF9013 change the output bit to data7 */ |
| ret = af9013_write_reg_bits(state, 0xd500, 3, 1, 1); |
| if (ret) |
| goto error; |
| /* AF9013 set mpeg to full speed */ |
| ret = af9013_write_reg_bits(state, 0xd502, 4, 1, 1); |
| } |
| if (ret) |
| goto error; |
| ret = af9013_write_reg_bits(state, 0xd520, 4, 1, 1); |
| if (ret) |
| goto error; |
| |
| /* set GPIOs */ |
| for (i = 0; i < sizeof(state->config.gpio); i++) { |
| ret = af9013_set_gpio(state, i, state->config.gpio[i]); |
| if (ret) |
| goto error; |
| } |
| |
| /* create dvb_frontend */ |
| memcpy(&state->frontend.ops, &af9013_ops, |
| sizeof(struct dvb_frontend_ops)); |
| state->frontend.demodulator_priv = state; |
| |
| return &state->frontend; |
| error: |
| kfree(state); |
| return NULL; |
| } |
| EXPORT_SYMBOL(af9013_attach); |
| |
| static struct dvb_frontend_ops af9013_ops = { |
| .info = { |
| .name = "Afatech AF9013 DVB-T", |
| .type = FE_OFDM, |
| .frequency_min = 174000000, |
| .frequency_max = 862000000, |
| .frequency_stepsize = 250000, |
| .frequency_tolerance = 0, |
| .caps = |
| FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | FE_CAN_QAM_16 | |
| FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | |
| FE_CAN_GUARD_INTERVAL_AUTO | |
| FE_CAN_HIERARCHY_AUTO | |
| FE_CAN_RECOVER | |
| FE_CAN_MUTE_TS |
| }, |
| |
| .release = af9013_release, |
| .init = af9013_init, |
| .sleep = af9013_sleep, |
| .i2c_gate_ctrl = af9013_i2c_gate_ctrl, |
| |
| .set_frontend = af9013_set_frontend, |
| .get_frontend = af9013_get_frontend, |
| |
| .get_tune_settings = af9013_get_tune_settings, |
| |
| .read_status = af9013_read_status, |
| .read_ber = af9013_read_ber, |
| .read_signal_strength = af9013_read_signal_strength, |
| .read_snr = af9013_read_snr, |
| .read_ucblocks = af9013_read_ucblocks, |
| }; |
| |
| module_param_named(debug, af9013_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); |
| |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_DESCRIPTION("Afatech AF9013 DVB-T demodulator driver"); |
| MODULE_LICENSE("GPL"); |