Documentation/devicetree/bindings/media/cdns,csi2rx.yaml

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Cadence MIPI-CSI2 RX controller

maintainers:
  - Maxime Ripard <mripard@kernel.org>

description:
  The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
  lanes in input, and 4 different pixel streams in output.

properties:
  compatible:
    items:
      - enum:
          - starfive,jh7110-csi2rx
      - const: cdns,csi2rx

  reg:
    maxItems: 1

  clocks:
    items:
      - description: CSI2Rx system clock
      - description: Gated Register bank clock for APB interface
      - description: pixel Clock for Stream interface 0
      - description: pixel Clock for Stream interface 1
      - description: pixel Clock for Stream interface 2
      - description: pixel Clock for Stream interface 3

  clock-names:
    items:
      - const: sys_clk
      - const: p_clk
      - const: pixel_if0_clk
      - const: pixel_if1_clk
      - const: pixel_if2_clk
      - const: pixel_if3_clk

  resets:
    items:
      - description: CSI2Rx system reset
      - description: Gated Register bank reset for APB interface
      - description: pixel reset for Stream interface 0
      - description: pixel reset for Stream interface 1
      - description: pixel reset for Stream interface 2
      - description: pixel reset for Stream interface 3

  reset-names:
    items:
      - const: sys
      - const: reg_bank
      - const: pixel_if0
      - const: pixel_if1
      - const: pixel_if2
      - const: pixel_if3

  phys:
    maxItems: 1
    description: MIPI D-PHY

  phy-names:
    items:
      - const: dphy

  ports:
    $ref: /schemas/graph.yaml#/properties/ports

    properties:
      port@0:
        $ref: /schemas/graph.yaml#/$defs/port-base
        unevaluatedProperties: false
        description:
          Input port node, single endpoint describing the CSI-2 transmitter.

        properties:
          endpoint:
            $ref: video-interfaces.yaml#
            unevaluatedProperties: false

            properties:
              bus-type:
                const: 4

              clock-lanes:
                const: 0

              data-lanes:
                minItems: 1
                maxItems: 4
                items:
                  maximum: 4

            required:
              - data-lanes

      port@1:
        $ref: /schemas/graph.yaml#/properties/port
        description:
          Stream 0 Output port node

      port@2:
        $ref: /schemas/graph.yaml#/properties/port
        description:
          Stream 1 Output port node

      port@3:
        $ref: /schemas/graph.yaml#/properties/port
        description:
          Stream 2 Output port node

      port@4:
        $ref: /schemas/graph.yaml#/properties/port
        description:
          Stream 3 Output port node

    required:
      - port@0

required:
  - compatible
  - reg
  - clocks
  - clock-names
  - ports

additionalProperties: false

examples:
  - |
    csi@d060000 {
        compatible = "starfive,jh7110-csi2rx", "cdns,csi2rx";
        reg = <0x0d060000 0x1000>;
        clocks = <&byteclock 7>, <&byteclock 6>,
                 <&coreclock 8>, <&coreclock 9>,
                 <&coreclock 10>, <&coreclock 11>;
        clock-names = "sys_clk", "p_clk",
                      "pixel_if0_clk", "pixel_if1_clk",
                      "pixel_if2_clk", "pixel_if3_clk";
        resets = <&bytereset 9>, <&bytereset 4>,
                 <&corereset 5>, <&corereset 6>,
                 <&corereset 7>, <&corereset 8>;
        reset-names = "sys", "reg_bank",
                      "pixel_if0", "pixel_if1",
                      "pixel_if2", "pixel_if3";
        phys = <&csi_phy>;
        phy-names = "dphy";

        ports {
                #address-cells = <1>;
                #size-cells = <0>;

                port@0 {
                    reg = <0>;

                    csi2rx_in_sensor: endpoint {
                        remote-endpoint = <&sensor_out_csi2rx>;
                        clock-lanes = <0>;
                        data-lanes = <1 2>;
                    };
                };

                port@1 {
                    reg = <1>;

                    csi2rx_out_grabber0: endpoint {
                        remote-endpoint = <&grabber0_in_csi2rx>;
                    };
                };

                port@2 {
                    reg = <2>;

                    csi2rx_out_grabber1: endpoint {
                        remote-endpoint = <&grabber1_in_csi2rx>;
                    };
                };

                port@3 {
                    reg = <3>;

                    csi2rx_out_grabber2: endpoint {
                        remote-endpoint = <&grabber2_in_csi2rx>;
                    };
                };

                port@4 {
                    reg = <4>;

                    csi2rx_out_grabber3: endpoint {
                        remote-endpoint = <&grabber3_in_csi2rx>;
                    };
                };
        };
    };

...