| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Extensible Firmware Interface |
| * |
| * Based on Extensible Firmware Interface Specification version 2.4 |
| * |
| * Copyright (C) 2013 - 2015 Linaro Ltd. |
| */ |
| |
| #define pr_fmt(fmt) "efi: " fmt |
| |
| #include <linux/efi.h> |
| #include <linux/fwnode.h> |
| #include <linux/init.h> |
| #include <linux/memblock.h> |
| #include <linux/mm_types.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_fdt.h> |
| #include <linux/platform_device.h> |
| #include <linux/screen_info.h> |
| |
| #include <asm/efi.h> |
| |
| unsigned long __initdata screen_info_table = EFI_INVALID_TABLE_ADDR; |
| |
| static int __init is_memory(efi_memory_desc_t *md) |
| { |
| if (md->attribute & (EFI_MEMORY_WB|EFI_MEMORY_WT|EFI_MEMORY_WC)) |
| return 1; |
| return 0; |
| } |
| |
| /* |
| * Translate a EFI virtual address into a physical address: this is necessary, |
| * as some data members of the EFI system table are virtually remapped after |
| * SetVirtualAddressMap() has been called. |
| */ |
| static phys_addr_t __init efi_to_phys(unsigned long addr) |
| { |
| efi_memory_desc_t *md; |
| |
| for_each_efi_memory_desc(md) { |
| if (!(md->attribute & EFI_MEMORY_RUNTIME)) |
| continue; |
| if (md->virt_addr == 0) |
| /* no virtual mapping has been installed by the stub */ |
| break; |
| if (md->virt_addr <= addr && |
| (addr - md->virt_addr) < (md->num_pages << EFI_PAGE_SHIFT)) |
| return md->phys_addr + addr - md->virt_addr; |
| } |
| return addr; |
| } |
| |
| extern __weak const efi_config_table_type_t efi_arch_tables[]; |
| |
| /* |
| * x86 defines its own screen_info and uses it even without EFI, |
| * everything else can get it from here. |
| */ |
| #if !defined(CONFIG_X86) && (defined(CONFIG_SYSFB) || defined(CONFIG_EFI_EARLYCON)) |
| struct screen_info screen_info __section(".data"); |
| EXPORT_SYMBOL_GPL(screen_info); |
| #endif |
| |
| static void __init init_screen_info(void) |
| { |
| struct screen_info *si; |
| |
| if (screen_info_table != EFI_INVALID_TABLE_ADDR) { |
| si = early_memremap(screen_info_table, sizeof(*si)); |
| if (!si) { |
| pr_err("Could not map screen_info config table\n"); |
| return; |
| } |
| screen_info = *si; |
| memset(si, 0, sizeof(*si)); |
| early_memunmap(si, sizeof(*si)); |
| |
| if (memblock_is_map_memory(screen_info.lfb_base)) |
| memblock_mark_nomap(screen_info.lfb_base, |
| screen_info.lfb_size); |
| |
| if (IS_ENABLED(CONFIG_EFI_EARLYCON)) |
| efi_earlycon_reprobe(); |
| } |
| } |
| |
| static int __init uefi_init(u64 efi_system_table) |
| { |
| efi_config_table_t *config_tables; |
| efi_system_table_t *systab; |
| size_t table_size; |
| int retval; |
| |
| systab = early_memremap_ro(efi_system_table, sizeof(efi_system_table_t)); |
| if (systab == NULL) { |
| pr_warn("Unable to map EFI system table.\n"); |
| return -ENOMEM; |
| } |
| |
| set_bit(EFI_BOOT, &efi.flags); |
| if (IS_ENABLED(CONFIG_64BIT)) |
| set_bit(EFI_64BIT, &efi.flags); |
| |
| retval = efi_systab_check_header(&systab->hdr); |
| if (retval) |
| goto out; |
| |
| efi.runtime = systab->runtime; |
| efi.runtime_version = systab->hdr.revision; |
| |
| efi_systab_report_header(&systab->hdr, efi_to_phys(systab->fw_vendor)); |
| |
| table_size = sizeof(efi_config_table_t) * systab->nr_tables; |
| config_tables = early_memremap_ro(efi_to_phys(systab->tables), |
| table_size); |
| if (config_tables == NULL) { |
| pr_warn("Unable to map EFI config table array.\n"); |
| retval = -ENOMEM; |
| goto out; |
| } |
| retval = efi_config_parse_tables(config_tables, systab->nr_tables, |
| efi_arch_tables); |
| |
| early_memunmap(config_tables, table_size); |
| out: |
| early_memunmap(systab, sizeof(efi_system_table_t)); |
| return retval; |
| } |
| |
| /* |
| * Return true for regions that can be used as System RAM. |
| */ |
| static __init int is_usable_memory(efi_memory_desc_t *md) |
| { |
| switch (md->type) { |
| case EFI_LOADER_CODE: |
| case EFI_LOADER_DATA: |
| case EFI_ACPI_RECLAIM_MEMORY: |
| case EFI_BOOT_SERVICES_CODE: |
| case EFI_BOOT_SERVICES_DATA: |
| case EFI_CONVENTIONAL_MEMORY: |
| case EFI_PERSISTENT_MEMORY: |
| /* |
| * Special purpose memory is 'soft reserved', which means it |
| * is set aside initially, but can be hotplugged back in or |
| * be assigned to the dax driver after boot. |
| */ |
| if (efi_soft_reserve_enabled() && |
| (md->attribute & EFI_MEMORY_SP)) |
| return false; |
| |
| /* |
| * According to the spec, these regions are no longer reserved |
| * after calling ExitBootServices(). However, we can only use |
| * them as System RAM if they can be mapped writeback cacheable. |
| */ |
| return (md->attribute & EFI_MEMORY_WB); |
| default: |
| break; |
| } |
| return false; |
| } |
| |
| static __init void reserve_regions(void) |
| { |
| efi_memory_desc_t *md; |
| u64 paddr, npages, size; |
| |
| if (efi_enabled(EFI_DBG)) |
| pr_info("Processing EFI memory map:\n"); |
| |
| /* |
| * Discard memblocks discovered so far: if there are any at this |
| * point, they originate from memory nodes in the DT, and UEFI |
| * uses its own memory map instead. |
| */ |
| memblock_dump_all(); |
| memblock_remove(0, PHYS_ADDR_MAX); |
| |
| for_each_efi_memory_desc(md) { |
| paddr = md->phys_addr; |
| npages = md->num_pages; |
| |
| if (efi_enabled(EFI_DBG)) { |
| char buf[64]; |
| |
| pr_info(" 0x%012llx-0x%012llx %s\n", |
| paddr, paddr + (npages << EFI_PAGE_SHIFT) - 1, |
| efi_md_typeattr_format(buf, sizeof(buf), md)); |
| } |
| |
| memrange_efi_to_native(&paddr, &npages); |
| size = npages << PAGE_SHIFT; |
| |
| if (is_memory(md)) { |
| early_init_dt_add_memory_arch(paddr, size); |
| |
| if (!is_usable_memory(md)) |
| memblock_mark_nomap(paddr, size); |
| |
| /* keep ACPI reclaim memory intact for kexec etc. */ |
| if (md->type == EFI_ACPI_RECLAIM_MEMORY) |
| memblock_reserve(paddr, size); |
| } |
| } |
| } |
| |
| void __init efi_init(void) |
| { |
| struct efi_memory_map_data data; |
| u64 efi_system_table; |
| |
| /* Grab UEFI information placed in FDT by stub */ |
| efi_system_table = efi_get_fdt_params(&data); |
| if (!efi_system_table) |
| return; |
| |
| if (efi_memmap_init_early(&data) < 0) { |
| /* |
| * If we are booting via UEFI, the UEFI memory map is the only |
| * description of memory we have, so there is little point in |
| * proceeding if we cannot access it. |
| */ |
| panic("Unable to map EFI memory map.\n"); |
| } |
| |
| WARN(efi.memmap.desc_version != 1, |
| "Unexpected EFI_MEMORY_DESCRIPTOR version %ld", |
| efi.memmap.desc_version); |
| |
| if (uefi_init(efi_system_table) < 0) { |
| efi_memmap_unmap(); |
| return; |
| } |
| |
| reserve_regions(); |
| /* |
| * For memblock manipulation, the cap should come after the memblock_add(). |
| * And now, memblock is fully populated, it is time to do capping. |
| */ |
| early_init_dt_check_for_usable_mem_range(); |
| efi_find_mirror(); |
| efi_esrt_init(); |
| efi_mokvar_table_init(); |
| |
| memblock_reserve(data.phys_map & PAGE_MASK, |
| PAGE_ALIGN(data.size + (data.phys_map & ~PAGE_MASK))); |
| |
| if (IS_ENABLED(CONFIG_X86) || |
| IS_ENABLED(CONFIG_SYSFB) || |
| IS_ENABLED(CONFIG_EFI_EARLYCON)) |
| init_screen_info(); |
| } |