| /* |
| * Renesas SDHI |
| * |
| * Copyright (C) 2015-17 Renesas Electronics Corporation |
| * Copyright (C) 2016-17 Sang Engineering, Wolfram Sang |
| * Copyright (C) 2016-17 Horms Solutions, Simon Horman |
| * Copyright (C) 2009 Magnus Damm |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Based on "Compaq ASIC3 support": |
| * |
| * Copyright 2001 Compaq Computer Corporation. |
| * Copyright 2004-2005 Phil Blundell |
| * Copyright 2007-2008 OpenedHand Ltd. |
| * |
| * Authors: Phil Blundell <pb@handhelds.org>, |
| * Samuel Ortiz <sameo@openedhand.com> |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/clk.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mfd/tmio.h> |
| #include <linux/sh_dma.h> |
| #include <linux/delay.h> |
| #include <linux/pinctrl/consumer.h> |
| #include <linux/pinctrl/pinctrl-state.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include "renesas_sdhi.h" |
| #include "tmio_mmc.h" |
| |
| #define EXT_ACC 0xe4 |
| |
| #define SDHI_VER_GEN2_SDR50 0x490c |
| #define SDHI_VER_RZ_A1 0x820b |
| /* very old datasheets said 0x490c for SDR104, too. They are wrong! */ |
| #define SDHI_VER_GEN2_SDR104 0xcb0d |
| #define SDHI_VER_GEN3_SD 0xcc10 |
| #define SDHI_VER_GEN3_SDMMC 0xcd10 |
| |
| static void renesas_sdhi_sdbuf_width(struct tmio_mmc_host *host, int width) |
| { |
| u32 val; |
| |
| /* |
| * see also |
| * renesas_sdhi_of_data :: dma_buswidth |
| */ |
| switch (sd_ctrl_read16(host, CTL_VERSION)) { |
| case SDHI_VER_GEN2_SDR50: |
| val = (width == 32) ? 0x0001 : 0x0000; |
| break; |
| case SDHI_VER_GEN2_SDR104: |
| val = (width == 32) ? 0x0000 : 0x0001; |
| break; |
| case SDHI_VER_GEN3_SD: |
| case SDHI_VER_GEN3_SDMMC: |
| if (width == 64) |
| val = 0x0000; |
| else if (width == 32) |
| val = 0x0101; |
| else |
| val = 0x0001; |
| break; |
| default: |
| /* nothing to do */ |
| return; |
| } |
| |
| sd_ctrl_write16(host, EXT_ACC, val); |
| } |
| |
| static int renesas_sdhi_clk_enable(struct tmio_mmc_host *host) |
| { |
| struct mmc_host *mmc = host->mmc; |
| struct renesas_sdhi *priv = host_to_priv(host); |
| int ret = clk_prepare_enable(priv->clk); |
| |
| if (ret < 0) |
| return ret; |
| |
| ret = clk_prepare_enable(priv->clk_cd); |
| if (ret < 0) { |
| clk_disable_unprepare(priv->clk); |
| return ret; |
| } |
| |
| /* |
| * The clock driver may not know what maximum frequency |
| * actually works, so it should be set with the max-frequency |
| * property which will already have been read to f_max. If it |
| * was missing, assume the current frequency is the maximum. |
| */ |
| if (!mmc->f_max) |
| mmc->f_max = clk_get_rate(priv->clk); |
| |
| /* |
| * Minimum frequency is the minimum input clock frequency |
| * divided by our maximum divider. |
| */ |
| mmc->f_min = max(clk_round_rate(priv->clk, 1) / 512, 1L); |
| |
| /* enable 16bit data access on SDBUF as default */ |
| renesas_sdhi_sdbuf_width(host, 16); |
| |
| return 0; |
| } |
| |
| static unsigned int renesas_sdhi_clk_update(struct tmio_mmc_host *host, |
| unsigned int new_clock) |
| { |
| struct renesas_sdhi *priv = host_to_priv(host); |
| unsigned int freq, diff, best_freq = 0, diff_min = ~0; |
| int i, ret; |
| |
| /* tested only on R-Car Gen2+ currently; may work for others */ |
| if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2)) |
| return clk_get_rate(priv->clk); |
| |
| /* |
| * We want the bus clock to be as close as possible to, but no |
| * greater than, new_clock. As we can divide by 1 << i for |
| * any i in [0, 9] we want the input clock to be as close as |
| * possible, but no greater than, new_clock << i. |
| */ |
| for (i = min(9, ilog2(UINT_MAX / new_clock)); i >= 0; i--) { |
| freq = clk_round_rate(priv->clk, new_clock << i); |
| if (freq > (new_clock << i)) { |
| /* Too fast; look for a slightly slower option */ |
| freq = clk_round_rate(priv->clk, |
| (new_clock << i) / 4 * 3); |
| if (freq > (new_clock << i)) |
| continue; |
| } |
| |
| diff = new_clock - (freq >> i); |
| if (diff <= diff_min) { |
| best_freq = freq; |
| diff_min = diff; |
| } |
| } |
| |
| ret = clk_set_rate(priv->clk, best_freq); |
| |
| return ret == 0 ? best_freq : clk_get_rate(priv->clk); |
| } |
| |
| static void renesas_sdhi_clk_disable(struct tmio_mmc_host *host) |
| { |
| struct renesas_sdhi *priv = host_to_priv(host); |
| |
| clk_disable_unprepare(priv->clk); |
| clk_disable_unprepare(priv->clk_cd); |
| } |
| |
| static int renesas_sdhi_card_busy(struct mmc_host *mmc) |
| { |
| struct tmio_mmc_host *host = mmc_priv(mmc); |
| |
| return !(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) & |
| TMIO_STAT_DAT0); |
| } |
| |
| static int renesas_sdhi_start_signal_voltage_switch(struct mmc_host *mmc, |
| struct mmc_ios *ios) |
| { |
| struct tmio_mmc_host *host = mmc_priv(mmc); |
| struct renesas_sdhi *priv = host_to_priv(host); |
| struct pinctrl_state *pin_state; |
| int ret; |
| |
| switch (ios->signal_voltage) { |
| case MMC_SIGNAL_VOLTAGE_330: |
| pin_state = priv->pins_default; |
| break; |
| case MMC_SIGNAL_VOLTAGE_180: |
| pin_state = priv->pins_uhs; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* |
| * If anything is missing, assume signal voltage is fixed at |
| * 3.3V and succeed/fail accordingly. |
| */ |
| if (IS_ERR(priv->pinctrl) || IS_ERR(pin_state)) |
| return ios->signal_voltage == |
| MMC_SIGNAL_VOLTAGE_330 ? 0 : -EINVAL; |
| |
| ret = mmc_regulator_set_vqmmc(host->mmc, ios); |
| if (ret) |
| return ret; |
| |
| return pinctrl_select_state(priv->pinctrl, pin_state); |
| } |
| |
| /* SCC registers */ |
| #define SH_MOBILE_SDHI_SCC_DTCNTL 0x000 |
| #define SH_MOBILE_SDHI_SCC_TAPSET 0x002 |
| #define SH_MOBILE_SDHI_SCC_DT2FF 0x004 |
| #define SH_MOBILE_SDHI_SCC_CKSEL 0x006 |
| #define SH_MOBILE_SDHI_SCC_RVSCNTL 0x008 |
| #define SH_MOBILE_SDHI_SCC_RVSREQ 0x00A |
| |
| /* Definitions for values the SH_MOBILE_SDHI_SCC_DTCNTL register */ |
| #define SH_MOBILE_SDHI_SCC_DTCNTL_TAPEN BIT(0) |
| #define SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT 16 |
| #define SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_MASK 0xff |
| |
| /* Definitions for values the SH_MOBILE_SDHI_SCC_CKSEL register */ |
| #define SH_MOBILE_SDHI_SCC_CKSEL_DTSEL BIT(0) |
| /* Definitions for values the SH_MOBILE_SDHI_SCC_RVSCNTL register */ |
| #define SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN BIT(0) |
| /* Definitions for values the SH_MOBILE_SDHI_SCC_RVSREQ register */ |
| #define SH_MOBILE_SDHI_SCC_RVSREQ_RVSERR BIT(2) |
| |
| static inline u32 sd_scc_read32(struct tmio_mmc_host *host, |
| struct renesas_sdhi *priv, int addr) |
| { |
| return readl(priv->scc_ctl + (addr << host->bus_shift)); |
| } |
| |
| static inline void sd_scc_write32(struct tmio_mmc_host *host, |
| struct renesas_sdhi *priv, |
| int addr, u32 val) |
| { |
| writel(val, priv->scc_ctl + (addr << host->bus_shift)); |
| } |
| |
| static unsigned int renesas_sdhi_init_tuning(struct tmio_mmc_host *host) |
| { |
| struct renesas_sdhi *priv; |
| |
| priv = host_to_priv(host); |
| |
| /* set sampling clock selection range */ |
| sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL, |
| 0x8 << SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT); |
| |
| /* Initialize SCC */ |
| sd_ctrl_write32_as_16_and_16(host, CTL_STATUS, 0x0); |
| |
| sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL, |
| SH_MOBILE_SDHI_SCC_DTCNTL_TAPEN | |
| sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL)); |
| |
| sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN & |
| sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); |
| |
| sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL, |
| SH_MOBILE_SDHI_SCC_CKSEL_DTSEL | |
| sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL)); |
| |
| sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN | |
| sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); |
| |
| sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL, |
| ~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN & |
| sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL)); |
| |
| sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DT2FF, priv->scc_tappos); |
| |
| /* Read TAPNUM */ |
| return (sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL) >> |
| SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT) & |
| SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_MASK; |
| } |
| |
| static void renesas_sdhi_prepare_tuning(struct tmio_mmc_host *host, |
| unsigned long tap) |
| { |
| struct renesas_sdhi *priv = host_to_priv(host); |
| |
| /* Set sampling clock position */ |
| sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, tap); |
| } |
| |
| #define SH_MOBILE_SDHI_MAX_TAP 3 |
| |
| static int renesas_sdhi_select_tuning(struct tmio_mmc_host *host) |
| { |
| struct renesas_sdhi *priv = host_to_priv(host); |
| unsigned long tap_cnt; /* counter of tuning success */ |
| unsigned long tap_set; /* tap position */ |
| unsigned long tap_start;/* start position of tuning success */ |
| unsigned long tap_end; /* end position of tuning success */ |
| unsigned long ntap; /* temporary counter of tuning success */ |
| unsigned long i; |
| |
| /* Clear SCC_RVSREQ */ |
| sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ, 0); |
| |
| /* |
| * Find the longest consecutive run of successful probes. If that |
| * is more than SH_MOBILE_SDHI_MAX_TAP probes long then use the |
| * center index as the tap. |
| */ |
| tap_cnt = 0; |
| ntap = 0; |
| tap_start = 0; |
| tap_end = 0; |
| for (i = 0; i < host->tap_num * 2; i++) { |
| if (test_bit(i, host->taps)) { |
| ntap++; |
| } else { |
| if (ntap > tap_cnt) { |
| tap_start = i - ntap; |
| tap_end = i - 1; |
| tap_cnt = ntap; |
| } |
| ntap = 0; |
| } |
| } |
| |
| if (ntap > tap_cnt) { |
| tap_start = i - ntap; |
| tap_end = i - 1; |
| tap_cnt = ntap; |
| } |
| |
| if (tap_cnt >= SH_MOBILE_SDHI_MAX_TAP) |
| tap_set = (tap_start + tap_end) / 2 % host->tap_num; |
| else |
| return -EIO; |
| |
| /* Set SCC */ |
| sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, tap_set); |
| |
| /* Enable auto re-tuning */ |
| sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL, |
| SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN | |
| sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL)); |
| |
| return 0; |
| } |
| |
| static bool renesas_sdhi_check_scc_error(struct tmio_mmc_host *host) |
| { |
| struct renesas_sdhi *priv = host_to_priv(host); |
| |
| /* Check SCC error */ |
| if (sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL) & |
| SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN && |
| sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ) & |
| SH_MOBILE_SDHI_SCC_RVSREQ_RVSERR) { |
| /* Clear SCC error */ |
| sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ, 0); |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static void renesas_sdhi_hw_reset(struct tmio_mmc_host *host) |
| { |
| struct renesas_sdhi *priv; |
| |
| priv = host_to_priv(host); |
| |
| /* Reset SCC */ |
| sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN & |
| sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); |
| |
| sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL, |
| ~SH_MOBILE_SDHI_SCC_CKSEL_DTSEL & |
| sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL)); |
| |
| sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN | |
| sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); |
| |
| sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL, |
| ~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN & |
| sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL)); |
| |
| sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL, |
| ~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN & |
| sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL)); |
| } |
| |
| static int renesas_sdhi_wait_idle(struct tmio_mmc_host *host, u32 bit) |
| { |
| int timeout = 1000; |
| /* CBSY is set when busy, SCLKDIVEN is cleared when busy */ |
| u32 wait_state = (bit == TMIO_STAT_CMD_BUSY ? TMIO_STAT_CMD_BUSY : 0); |
| |
| while (--timeout && (sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) |
| & bit) == wait_state) |
| udelay(1); |
| |
| if (!timeout) { |
| dev_warn(&host->pdev->dev, "timeout waiting for SD bus idle\n"); |
| return -EBUSY; |
| } |
| |
| return 0; |
| } |
| |
| static int renesas_sdhi_write16_hook(struct tmio_mmc_host *host, int addr) |
| { |
| u32 bit = TMIO_STAT_SCLKDIVEN; |
| |
| switch (addr) { |
| case CTL_SD_CMD: |
| case CTL_STOP_INTERNAL_ACTION: |
| case CTL_XFER_BLK_COUNT: |
| case CTL_SD_XFER_LEN: |
| case CTL_SD_MEM_CARD_OPT: |
| case CTL_TRANSACTION_CTL: |
| case CTL_DMA_ENABLE: |
| case EXT_ACC: |
| if (host->pdata->flags & TMIO_MMC_HAVE_CBSY) |
| bit = TMIO_STAT_CMD_BUSY; |
| /* fallthrough */ |
| case CTL_SD_CARD_CLK_CTL: |
| return renesas_sdhi_wait_idle(host, bit); |
| } |
| |
| return 0; |
| } |
| |
| static int renesas_sdhi_multi_io_quirk(struct mmc_card *card, |
| unsigned int direction, int blk_size) |
| { |
| /* |
| * In Renesas controllers, when performing a |
| * multiple block read of one or two blocks, |
| * depending on the timing with which the |
| * response register is read, the response |
| * value may not be read properly. |
| * Use single block read for this HW bug |
| */ |
| if ((direction == MMC_DATA_READ) && |
| blk_size == 2) |
| return 1; |
| |
| return blk_size; |
| } |
| |
| static void renesas_sdhi_enable_dma(struct tmio_mmc_host *host, bool enable) |
| { |
| /* Iff regs are 8 byte apart, sdbuf is 64 bit. Otherwise always 32. */ |
| int width = (host->bus_shift == 2) ? 64 : 32; |
| |
| sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? DMA_ENABLE_DMASDRW : 0); |
| renesas_sdhi_sdbuf_width(host, enable ? width : 16); |
| } |
| |
| int renesas_sdhi_probe(struct platform_device *pdev, |
| const struct tmio_mmc_dma_ops *dma_ops) |
| { |
| struct tmio_mmc_data *mmd = pdev->dev.platform_data; |
| const struct renesas_sdhi_of_data *of_data; |
| struct tmio_mmc_data *mmc_data; |
| struct tmio_mmc_dma *dma_priv; |
| struct tmio_mmc_host *host; |
| struct renesas_sdhi *priv; |
| struct resource *res; |
| int irq, ret, i; |
| |
| of_data = of_device_get_match_data(&pdev->dev); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) |
| return -EINVAL; |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(struct renesas_sdhi), |
| GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| mmc_data = &priv->mmc_data; |
| dma_priv = &priv->dma_priv; |
| |
| priv->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(priv->clk)) { |
| ret = PTR_ERR(priv->clk); |
| dev_err(&pdev->dev, "cannot get clock: %d\n", ret); |
| return ret; |
| } |
| |
| /* |
| * Some controllers provide a 2nd clock just to run the internal card |
| * detection logic. Unfortunately, the existing driver architecture does |
| * not support a separation of clocks for runtime PM usage. When |
| * native hotplug is used, the tmio driver assumes that the core |
| * must continue to run for card detect to stay active, so we cannot |
| * disable it. |
| * Additionally, it is prohibited to supply a clock to the core but not |
| * to the card detect circuit. That leaves us with if separate clocks |
| * are presented, we must treat them both as virtually 1 clock. |
| */ |
| priv->clk_cd = devm_clk_get(&pdev->dev, "cd"); |
| if (IS_ERR(priv->clk_cd)) |
| priv->clk_cd = NULL; |
| |
| priv->pinctrl = devm_pinctrl_get(&pdev->dev); |
| if (!IS_ERR(priv->pinctrl)) { |
| priv->pins_default = pinctrl_lookup_state(priv->pinctrl, |
| PINCTRL_STATE_DEFAULT); |
| priv->pins_uhs = pinctrl_lookup_state(priv->pinctrl, |
| "state_uhs"); |
| } |
| |
| host = tmio_mmc_host_alloc(pdev, mmc_data); |
| if (IS_ERR(host)) |
| return PTR_ERR(host); |
| |
| if (of_data) { |
| mmc_data->flags |= of_data->tmio_flags; |
| mmc_data->ocr_mask = of_data->tmio_ocr_mask; |
| mmc_data->capabilities |= of_data->capabilities; |
| mmc_data->capabilities2 |= of_data->capabilities2; |
| mmc_data->dma_rx_offset = of_data->dma_rx_offset; |
| mmc_data->max_blk_count = of_data->max_blk_count; |
| mmc_data->max_segs = of_data->max_segs; |
| dma_priv->dma_buswidth = of_data->dma_buswidth; |
| host->bus_shift = of_data->bus_shift; |
| } |
| |
| host->write16_hook = renesas_sdhi_write16_hook; |
| host->clk_enable = renesas_sdhi_clk_enable; |
| host->clk_update = renesas_sdhi_clk_update; |
| host->clk_disable = renesas_sdhi_clk_disable; |
| host->multi_io_quirk = renesas_sdhi_multi_io_quirk; |
| host->dma_ops = dma_ops; |
| |
| /* SDR speeds are only available on Gen2+ */ |
| if (mmc_data->flags & TMIO_MMC_MIN_RCAR2) { |
| /* card_busy caused issues on r8a73a4 (pre-Gen2) CD-less SDHI */ |
| host->ops.card_busy = renesas_sdhi_card_busy; |
| host->ops.start_signal_voltage_switch = |
| renesas_sdhi_start_signal_voltage_switch; |
| } |
| |
| /* Orginally registers were 16 bit apart, could be 32 or 64 nowadays */ |
| if (!host->bus_shift && resource_size(res) > 0x100) /* old way to determine the shift */ |
| host->bus_shift = 1; |
| |
| if (mmd) |
| *mmc_data = *mmd; |
| |
| dma_priv->filter = shdma_chan_filter; |
| dma_priv->enable = renesas_sdhi_enable_dma; |
| |
| mmc_data->alignment_shift = 1; /* 2-byte alignment */ |
| mmc_data->capabilities |= MMC_CAP_MMC_HIGHSPEED; |
| |
| /* |
| * All SDHI blocks support 2-byte and larger block sizes in 4-bit |
| * bus width mode. |
| */ |
| mmc_data->flags |= TMIO_MMC_BLKSZ_2BYTES; |
| |
| /* |
| * All SDHI blocks support SDIO IRQ signalling. |
| */ |
| mmc_data->flags |= TMIO_MMC_SDIO_IRQ; |
| |
| /* All SDHI have CMD12 control bit */ |
| mmc_data->flags |= TMIO_MMC_HAVE_CMD12_CTRL; |
| |
| /* All SDHI have SDIO status bits which must be 1 */ |
| mmc_data->flags |= TMIO_MMC_SDIO_STATUS_SETBITS; |
| |
| ret = renesas_sdhi_clk_enable(host); |
| if (ret) |
| goto efree; |
| |
| ret = tmio_mmc_host_probe(host); |
| if (ret < 0) |
| goto edisclk; |
| |
| /* One Gen2 SDHI incarnation does NOT have a CBSY bit */ |
| if (sd_ctrl_read16(host, CTL_VERSION) == SDHI_VER_GEN2_SDR50) |
| mmc_data->flags &= ~TMIO_MMC_HAVE_CBSY; |
| |
| /* Enable tuning iff we have an SCC and a supported mode */ |
| if (of_data && of_data->scc_offset && |
| (host->mmc->caps & MMC_CAP_UHS_SDR104 || |
| host->mmc->caps2 & MMC_CAP2_HS200_1_8V_SDR)) { |
| const struct renesas_sdhi_scc *taps = of_data->taps; |
| bool hit = false; |
| |
| host->mmc->caps |= MMC_CAP_HW_RESET; |
| |
| for (i = 0; i < of_data->taps_num; i++) { |
| if (taps[i].clk_rate == 0 || |
| taps[i].clk_rate == host->mmc->f_max) { |
| priv->scc_tappos = taps->tap; |
| hit = true; |
| break; |
| } |
| } |
| |
| if (!hit) |
| dev_warn(&host->pdev->dev, "Unknown clock rate for SDR104\n"); |
| |
| priv->scc_ctl = host->ctl + of_data->scc_offset; |
| host->init_tuning = renesas_sdhi_init_tuning; |
| host->prepare_tuning = renesas_sdhi_prepare_tuning; |
| host->select_tuning = renesas_sdhi_select_tuning; |
| host->check_scc_error = renesas_sdhi_check_scc_error; |
| host->hw_reset = renesas_sdhi_hw_reset; |
| } |
| |
| i = 0; |
| while (1) { |
| irq = platform_get_irq(pdev, i); |
| if (irq < 0) |
| break; |
| i++; |
| ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_irq, 0, |
| dev_name(&pdev->dev), host); |
| if (ret) |
| goto eirq; |
| } |
| |
| /* There must be at least one IRQ source */ |
| if (!i) { |
| ret = irq; |
| goto eirq; |
| } |
| |
| dev_info(&pdev->dev, "%s base at 0x%08lx max clock rate %u MHz\n", |
| mmc_hostname(host->mmc), (unsigned long) |
| (platform_get_resource(pdev, IORESOURCE_MEM, 0)->start), |
| host->mmc->f_max / 1000000); |
| |
| return ret; |
| |
| eirq: |
| tmio_mmc_host_remove(host); |
| edisclk: |
| renesas_sdhi_clk_disable(host); |
| efree: |
| tmio_mmc_host_free(host); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(renesas_sdhi_probe); |
| |
| int renesas_sdhi_remove(struct platform_device *pdev) |
| { |
| struct tmio_mmc_host *host = platform_get_drvdata(pdev); |
| |
| tmio_mmc_host_remove(host); |
| renesas_sdhi_clk_disable(host); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(renesas_sdhi_remove); |
| |
| MODULE_LICENSE("GPL v2"); |