| /* |
| * Device Tree Source for the iWave-RZG1E-G22M SODIMM SOM |
| * |
| * Copyright (C) 2017 Renesas Electronics Corp. |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| #include "r8a7745.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| compatible = "iwave,g22m", "renesas,r8a7745"; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| reg = <0 0x40000000 0 0x20000000>; |
| }; |
| |
| reg_3p3v: 3p3v { |
| compatible = "regulator-fixed"; |
| regulator-name = "3P3V"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| }; |
| |
| &extal_clk { |
| clock-frequency = <20000000>; |
| }; |
| |
| &pfc { |
| mmcif0_pins: mmc { |
| groups = "mmc_data8", "mmc_ctrl"; |
| function = "mmc"; |
| }; |
| |
| qspi_pins: qspi { |
| groups = "qspi_ctrl", "qspi_data2"; |
| function = "qspi"; |
| }; |
| |
| sdhi1_pins: sd1 { |
| groups = "sdhi1_data4", "sdhi1_ctrl"; |
| function = "sdhi1"; |
| power-source = <3300>; |
| }; |
| |
| i2c3_pins: i2c3 { |
| groups = "i2c3_b"; |
| function = "i2c3"; |
| }; |
| }; |
| |
| &mmcif0 { |
| pinctrl-0 = <&mmcif0_pins>; |
| pinctrl-names = "default"; |
| |
| vmmc-supply = <®_3p3v>; |
| bus-width = <8>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &qspi { |
| pinctrl-0 = <&qspi_pins>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| |
| /* WARNING - This device contains the bootloader. Handle with care. */ |
| flash: flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "sst,sst25vf016b", "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <50000000>; |
| spi-tx-bus-width = <1>; |
| spi-rx-bus-width = <1>; |
| m25p,fast-read; |
| spi-cpol; |
| spi-cpha; |
| }; |
| }; |
| |
| &sdhi1 { |
| pinctrl-0 = <&sdhi1_pins>; |
| pinctrl-names = "default"; |
| |
| vmmc-supply = <®_3p3v>; |
| vqmmc-supply = <®_3p3v>; |
| cd-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &i2c3 { |
| pinctrl-0 = <&i2c3_pins>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| clock-frequency = <400000>; |
| |
| rtc@68 { |
| compatible = "ti,bq32000"; |
| reg = <0x68>; |
| }; |
| }; |