| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2012-2014 Andy Lutomirski <luto@amacapital.net> |
| * |
| * Based on the original implementation which is: |
| * Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE |
| * Copyright 2003 Andi Kleen, SuSE Labs. |
| * |
| * Parts of the original code have been moved to arch/x86/vdso/vma.c |
| * |
| * This file implements vsyscall emulation. vsyscalls are a legacy ABI: |
| * Userspace can request certain kernel services by calling fixed |
| * addresses. This concept is problematic: |
| * |
| * - It interferes with ASLR. |
| * - It's awkward to write code that lives in kernel addresses but is |
| * callable by userspace at fixed addresses. |
| * - The whole concept is impossible for 32-bit compat userspace. |
| * - UML cannot easily virtualize a vsyscall. |
| * |
| * As of mid-2014, I believe that there is no new userspace code that |
| * will use a vsyscall if the vDSO is present. I hope that there will |
| * soon be no new userspace code that will ever use a vsyscall. |
| * |
| * The code in this file emulates vsyscalls when notified of a page |
| * fault to a vsyscall address. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/timer.h> |
| #include <linux/sched/signal.h> |
| #include <linux/mm_types.h> |
| #include <linux/syscalls.h> |
| #include <linux/ratelimit.h> |
| |
| #include <asm/vsyscall.h> |
| #include <asm/unistd.h> |
| #include <asm/fixmap.h> |
| #include <asm/traps.h> |
| #include <asm/paravirt.h> |
| |
| #define CREATE_TRACE_POINTS |
| #include "vsyscall_trace.h" |
| |
| static enum { EMULATE, XONLY, NONE } vsyscall_mode __ro_after_init = |
| #ifdef CONFIG_LEGACY_VSYSCALL_NONE |
| NONE; |
| #elif defined(CONFIG_LEGACY_VSYSCALL_XONLY) |
| XONLY; |
| #else |
| EMULATE; |
| #endif |
| |
| static int __init vsyscall_setup(char *str) |
| { |
| if (str) { |
| if (!strcmp("emulate", str)) |
| vsyscall_mode = EMULATE; |
| else if (!strcmp("xonly", str)) |
| vsyscall_mode = XONLY; |
| else if (!strcmp("none", str)) |
| vsyscall_mode = NONE; |
| else |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| early_param("vsyscall", vsyscall_setup); |
| |
| static void warn_bad_vsyscall(const char *level, struct pt_regs *regs, |
| const char *message) |
| { |
| if (!show_unhandled_signals) |
| return; |
| |
| printk_ratelimited("%s%s[%d] %s ip:%lx cs:%lx sp:%lx ax:%lx si:%lx di:%lx\n", |
| level, current->comm, task_pid_nr(current), |
| message, regs->ip, regs->cs, |
| regs->sp, regs->ax, regs->si, regs->di); |
| } |
| |
| static int addr_to_vsyscall_nr(unsigned long addr) |
| { |
| int nr; |
| |
| if ((addr & ~0xC00UL) != VSYSCALL_ADDR) |
| return -EINVAL; |
| |
| nr = (addr & 0xC00UL) >> 10; |
| if (nr >= 3) |
| return -EINVAL; |
| |
| return nr; |
| } |
| |
| static bool write_ok_or_segv(unsigned long ptr, size_t size) |
| { |
| /* |
| * XXX: if access_ok, get_user, and put_user handled |
| * sig_on_uaccess_err, this could go away. |
| */ |
| |
| if (!access_ok((void __user *)ptr, size)) { |
| struct thread_struct *thread = ¤t->thread; |
| |
| thread->error_code = X86_PF_USER | X86_PF_WRITE; |
| thread->cr2 = ptr; |
| thread->trap_nr = X86_TRAP_PF; |
| |
| force_sig_fault(SIGSEGV, SEGV_MAPERR, (void __user *)ptr); |
| return false; |
| } else { |
| return true; |
| } |
| } |
| |
| bool emulate_vsyscall(unsigned long error_code, |
| struct pt_regs *regs, unsigned long address) |
| { |
| struct task_struct *tsk; |
| unsigned long caller; |
| int vsyscall_nr, syscall_nr, tmp; |
| int prev_sig_on_uaccess_err; |
| long ret; |
| unsigned long orig_dx; |
| |
| /* Write faults or kernel-privilege faults never get fixed up. */ |
| if ((error_code & (X86_PF_WRITE | X86_PF_USER)) != X86_PF_USER) |
| return false; |
| |
| if (!(error_code & X86_PF_INSTR)) { |
| /* Failed vsyscall read */ |
| if (vsyscall_mode == EMULATE) |
| return false; |
| |
| /* |
| * User code tried and failed to read the vsyscall page. |
| */ |
| warn_bad_vsyscall(KERN_INFO, regs, "vsyscall read attempt denied -- look up the vsyscall kernel parameter if you need a workaround"); |
| return false; |
| } |
| |
| /* |
| * No point in checking CS -- the only way to get here is a user mode |
| * trap to a high address, which means that we're in 64-bit user code. |
| */ |
| |
| WARN_ON_ONCE(address != regs->ip); |
| |
| if (vsyscall_mode == NONE) { |
| warn_bad_vsyscall(KERN_INFO, regs, |
| "vsyscall attempted with vsyscall=none"); |
| return false; |
| } |
| |
| vsyscall_nr = addr_to_vsyscall_nr(address); |
| |
| trace_emulate_vsyscall(vsyscall_nr); |
| |
| if (vsyscall_nr < 0) { |
| warn_bad_vsyscall(KERN_WARNING, regs, |
| "misaligned vsyscall (exploit attempt or buggy program) -- look up the vsyscall kernel parameter if you need a workaround"); |
| goto sigsegv; |
| } |
| |
| if (get_user(caller, (unsigned long __user *)regs->sp) != 0) { |
| warn_bad_vsyscall(KERN_WARNING, regs, |
| "vsyscall with bad stack (exploit attempt?)"); |
| goto sigsegv; |
| } |
| |
| tsk = current; |
| |
| /* |
| * Check for access_ok violations and find the syscall nr. |
| * |
| * NULL is a valid user pointer (in the access_ok sense) on 32-bit and |
| * 64-bit, so we don't need to special-case it here. For all the |
| * vsyscalls, NULL means "don't write anything" not "write it at |
| * address 0". |
| */ |
| switch (vsyscall_nr) { |
| case 0: |
| if (!write_ok_or_segv(regs->di, sizeof(struct __kernel_old_timeval)) || |
| !write_ok_or_segv(regs->si, sizeof(struct timezone))) { |
| ret = -EFAULT; |
| goto check_fault; |
| } |
| |
| syscall_nr = __NR_gettimeofday; |
| break; |
| |
| case 1: |
| if (!write_ok_or_segv(regs->di, sizeof(__kernel_old_time_t))) { |
| ret = -EFAULT; |
| goto check_fault; |
| } |
| |
| syscall_nr = __NR_time; |
| break; |
| |
| case 2: |
| if (!write_ok_or_segv(regs->di, sizeof(unsigned)) || |
| !write_ok_or_segv(regs->si, sizeof(unsigned))) { |
| ret = -EFAULT; |
| goto check_fault; |
| } |
| |
| syscall_nr = __NR_getcpu; |
| break; |
| } |
| |
| /* |
| * Handle seccomp. regs->ip must be the original value. |
| * See seccomp_send_sigsys and Documentation/userspace-api/seccomp_filter.rst. |
| * |
| * We could optimize the seccomp disabled case, but performance |
| * here doesn't matter. |
| */ |
| regs->orig_ax = syscall_nr; |
| regs->ax = -ENOSYS; |
| tmp = secure_computing(); |
| if ((!tmp && regs->orig_ax != syscall_nr) || regs->ip != address) { |
| warn_bad_vsyscall(KERN_DEBUG, regs, |
| "seccomp tried to change syscall nr or ip"); |
| do_exit(SIGSYS); |
| } |
| regs->orig_ax = -1; |
| if (tmp) |
| goto do_ret; /* skip requested */ |
| |
| /* |
| * With a real vsyscall, page faults cause SIGSEGV. We want to |
| * preserve that behavior to make writing exploits harder. |
| */ |
| prev_sig_on_uaccess_err = current->thread.sig_on_uaccess_err; |
| current->thread.sig_on_uaccess_err = 1; |
| |
| ret = -EFAULT; |
| switch (vsyscall_nr) { |
| case 0: |
| /* this decodes regs->di and regs->si on its own */ |
| ret = __x64_sys_gettimeofday(regs); |
| break; |
| |
| case 1: |
| /* this decodes regs->di on its own */ |
| ret = __x64_sys_time(regs); |
| break; |
| |
| case 2: |
| /* while we could clobber regs->dx, we didn't in the past... */ |
| orig_dx = regs->dx; |
| regs->dx = 0; |
| /* this decodes regs->di, regs->si and regs->dx on its own */ |
| ret = __x64_sys_getcpu(regs); |
| regs->dx = orig_dx; |
| break; |
| } |
| |
| current->thread.sig_on_uaccess_err = prev_sig_on_uaccess_err; |
| |
| check_fault: |
| if (ret == -EFAULT) { |
| /* Bad news -- userspace fed a bad pointer to a vsyscall. */ |
| warn_bad_vsyscall(KERN_INFO, regs, |
| "vsyscall fault (exploit attempt?)"); |
| |
| /* |
| * If we failed to generate a signal for any reason, |
| * generate one here. (This should be impossible.) |
| */ |
| if (WARN_ON_ONCE(!sigismember(&tsk->pending.signal, SIGBUS) && |
| !sigismember(&tsk->pending.signal, SIGSEGV))) |
| goto sigsegv; |
| |
| return true; /* Don't emulate the ret. */ |
| } |
| |
| regs->ax = ret; |
| |
| do_ret: |
| /* Emulate a ret instruction. */ |
| regs->ip = caller; |
| regs->sp += 8; |
| return true; |
| |
| sigsegv: |
| force_sig(SIGSEGV); |
| return true; |
| } |
| |
| /* |
| * A pseudo VMA to allow ptrace access for the vsyscall page. This only |
| * covers the 64bit vsyscall page now. 32bit has a real VMA now and does |
| * not need special handling anymore: |
| */ |
| static const char *gate_vma_name(struct vm_area_struct *vma) |
| { |
| return "[vsyscall]"; |
| } |
| static const struct vm_operations_struct gate_vma_ops = { |
| .name = gate_vma_name, |
| }; |
| static struct vm_area_struct gate_vma __ro_after_init = { |
| .vm_start = VSYSCALL_ADDR, |
| .vm_end = VSYSCALL_ADDR + PAGE_SIZE, |
| .vm_page_prot = PAGE_READONLY_EXEC, |
| .vm_flags = VM_READ | VM_EXEC, |
| .vm_ops = &gate_vma_ops, |
| }; |
| |
| struct vm_area_struct *get_gate_vma(struct mm_struct *mm) |
| { |
| #ifdef CONFIG_COMPAT |
| if (!mm || !(mm->context.flags & MM_CONTEXT_HAS_VSYSCALL)) |
| return NULL; |
| #endif |
| if (vsyscall_mode == NONE) |
| return NULL; |
| return &gate_vma; |
| } |
| |
| int in_gate_area(struct mm_struct *mm, unsigned long addr) |
| { |
| struct vm_area_struct *vma = get_gate_vma(mm); |
| |
| if (!vma) |
| return 0; |
| |
| return (addr >= vma->vm_start) && (addr < vma->vm_end); |
| } |
| |
| /* |
| * Use this when you have no reliable mm, typically from interrupt |
| * context. It is less reliable than using a task's mm and may give |
| * false positives. |
| */ |
| int in_gate_area_no_mm(unsigned long addr) |
| { |
| return vsyscall_mode != NONE && (addr & PAGE_MASK) == VSYSCALL_ADDR; |
| } |
| |
| /* |
| * The VSYSCALL page is the only user-accessible page in the kernel address |
| * range. Normally, the kernel page tables can have _PAGE_USER clear, but |
| * the tables covering VSYSCALL_ADDR need _PAGE_USER set if vsyscalls |
| * are enabled. |
| * |
| * Some day we may create a "minimal" vsyscall mode in which we emulate |
| * vsyscalls but leave the page not present. If so, we skip calling |
| * this. |
| */ |
| void __init set_vsyscall_pgtable_user_bits(pgd_t *root) |
| { |
| pgd_t *pgd; |
| p4d_t *p4d; |
| pud_t *pud; |
| pmd_t *pmd; |
| |
| pgd = pgd_offset_pgd(root, VSYSCALL_ADDR); |
| set_pgd(pgd, __pgd(pgd_val(*pgd) | _PAGE_USER)); |
| p4d = p4d_offset(pgd, VSYSCALL_ADDR); |
| #if CONFIG_PGTABLE_LEVELS >= 5 |
| set_p4d(p4d, __p4d(p4d_val(*p4d) | _PAGE_USER)); |
| #endif |
| pud = pud_offset(p4d, VSYSCALL_ADDR); |
| set_pud(pud, __pud(pud_val(*pud) | _PAGE_USER)); |
| pmd = pmd_offset(pud, VSYSCALL_ADDR); |
| set_pmd(pmd, __pmd(pmd_val(*pmd) | _PAGE_USER)); |
| } |
| |
| void __init map_vsyscall(void) |
| { |
| extern char __vsyscall_page; |
| unsigned long physaddr_vsyscall = __pa_symbol(&__vsyscall_page); |
| |
| /* |
| * For full emulation, the page needs to exist for real. In |
| * execute-only mode, there is no PTE at all backing the vsyscall |
| * page. |
| */ |
| if (vsyscall_mode == EMULATE) { |
| __set_fixmap(VSYSCALL_PAGE, physaddr_vsyscall, |
| PAGE_KERNEL_VVAR); |
| set_vsyscall_pgtable_user_bits(swapper_pg_dir); |
| } |
| |
| if (vsyscall_mode == XONLY) |
| gate_vma.vm_flags = VM_EXEC; |
| |
| BUILD_BUG_ON((unsigned long)__fix_to_virt(VSYSCALL_PAGE) != |
| (unsigned long)VSYSCALL_ADDR); |
| } |