| // SPDX-License-Identifier: GPL-2.0-only |
| |
| #include <linux/phy.h> |
| #include <linux/ethtool_netlink.h> |
| #include "netlink.h" |
| #include "common.h" |
| |
| /* 802.3 standard allows 100 meters for BaseT cables. However longer |
| * cables might work, depending on the quality of the cables and the |
| * PHY. So allow testing for up to 150 meters. |
| */ |
| #define MAX_CABLE_LENGTH_CM (150 * 100) |
| |
| const struct nla_policy ethnl_cable_test_act_policy[] = { |
| [ETHTOOL_A_CABLE_TEST_HEADER] = |
| NLA_POLICY_NESTED(ethnl_header_policy), |
| }; |
| |
| static int ethnl_cable_test_started(struct phy_device *phydev, u8 cmd) |
| { |
| struct sk_buff *skb; |
| int err = -ENOMEM; |
| void *ehdr; |
| |
| skb = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL); |
| if (!skb) |
| goto out; |
| |
| ehdr = ethnl_bcastmsg_put(skb, cmd); |
| if (!ehdr) { |
| err = -EMSGSIZE; |
| goto out; |
| } |
| |
| err = ethnl_fill_reply_header(skb, phydev->attached_dev, |
| ETHTOOL_A_CABLE_TEST_NTF_HEADER); |
| if (err) |
| goto out; |
| |
| err = nla_put_u8(skb, ETHTOOL_A_CABLE_TEST_NTF_STATUS, |
| ETHTOOL_A_CABLE_TEST_NTF_STATUS_STARTED); |
| if (err) |
| goto out; |
| |
| genlmsg_end(skb, ehdr); |
| |
| return ethnl_multicast(skb, phydev->attached_dev); |
| |
| out: |
| nlmsg_free(skb); |
| phydev_err(phydev, "%s: Error %pe\n", __func__, ERR_PTR(err)); |
| |
| return err; |
| } |
| |
| int ethnl_act_cable_test(struct sk_buff *skb, struct genl_info *info) |
| { |
| struct ethnl_req_info req_info = {}; |
| const struct ethtool_phy_ops *ops; |
| struct nlattr **tb = info->attrs; |
| struct net_device *dev; |
| int ret; |
| |
| ret = ethnl_parse_header_dev_get(&req_info, |
| tb[ETHTOOL_A_CABLE_TEST_HEADER], |
| genl_info_net(info), info->extack, |
| true); |
| if (ret < 0) |
| return ret; |
| |
| dev = req_info.dev; |
| if (!dev->phydev) { |
| ret = -EOPNOTSUPP; |
| goto out_dev_put; |
| } |
| |
| rtnl_lock(); |
| ops = ethtool_phy_ops; |
| if (!ops || !ops->start_cable_test) { |
| ret = -EOPNOTSUPP; |
| goto out_rtnl; |
| } |
| |
| ret = ethnl_ops_begin(dev); |
| if (ret < 0) |
| goto out_rtnl; |
| |
| ret = ops->start_cable_test(dev->phydev, info->extack); |
| |
| ethnl_ops_complete(dev); |
| |
| if (!ret) |
| ethnl_cable_test_started(dev->phydev, |
| ETHTOOL_MSG_CABLE_TEST_NTF); |
| |
| out_rtnl: |
| rtnl_unlock(); |
| out_dev_put: |
| dev_put(dev); |
| return ret; |
| } |
| |
| int ethnl_cable_test_alloc(struct phy_device *phydev, u8 cmd) |
| { |
| int err = -ENOMEM; |
| |
| /* One TDR sample occupies 20 bytes. For a 150 meter cable, |
| * with four pairs, around 12K is needed. |
| */ |
| phydev->skb = genlmsg_new(SZ_16K, GFP_KERNEL); |
| if (!phydev->skb) |
| goto out; |
| |
| phydev->ehdr = ethnl_bcastmsg_put(phydev->skb, cmd); |
| if (!phydev->ehdr) { |
| err = -EMSGSIZE; |
| goto out; |
| } |
| |
| err = ethnl_fill_reply_header(phydev->skb, phydev->attached_dev, |
| ETHTOOL_A_CABLE_TEST_NTF_HEADER); |
| if (err) |
| goto out; |
| |
| err = nla_put_u8(phydev->skb, ETHTOOL_A_CABLE_TEST_NTF_STATUS, |
| ETHTOOL_A_CABLE_TEST_NTF_STATUS_COMPLETED); |
| if (err) |
| goto out; |
| |
| phydev->nest = nla_nest_start(phydev->skb, |
| ETHTOOL_A_CABLE_TEST_NTF_NEST); |
| if (!phydev->nest) { |
| err = -EMSGSIZE; |
| goto out; |
| } |
| |
| return 0; |
| |
| out: |
| nlmsg_free(phydev->skb); |
| phydev->skb = NULL; |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(ethnl_cable_test_alloc); |
| |
| void ethnl_cable_test_free(struct phy_device *phydev) |
| { |
| nlmsg_free(phydev->skb); |
| phydev->skb = NULL; |
| } |
| EXPORT_SYMBOL_GPL(ethnl_cable_test_free); |
| |
| void ethnl_cable_test_finished(struct phy_device *phydev) |
| { |
| nla_nest_end(phydev->skb, phydev->nest); |
| |
| genlmsg_end(phydev->skb, phydev->ehdr); |
| |
| ethnl_multicast(phydev->skb, phydev->attached_dev); |
| } |
| EXPORT_SYMBOL_GPL(ethnl_cable_test_finished); |
| |
| int ethnl_cable_test_result(struct phy_device *phydev, u8 pair, u8 result) |
| { |
| struct nlattr *nest; |
| int ret = -EMSGSIZE; |
| |
| nest = nla_nest_start(phydev->skb, ETHTOOL_A_CABLE_NEST_RESULT); |
| if (!nest) |
| return -EMSGSIZE; |
| |
| if (nla_put_u8(phydev->skb, ETHTOOL_A_CABLE_RESULT_PAIR, pair)) |
| goto err; |
| if (nla_put_u8(phydev->skb, ETHTOOL_A_CABLE_RESULT_CODE, result)) |
| goto err; |
| |
| nla_nest_end(phydev->skb, nest); |
| return 0; |
| |
| err: |
| nla_nest_cancel(phydev->skb, nest); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ethnl_cable_test_result); |
| |
| int ethnl_cable_test_fault_length(struct phy_device *phydev, u8 pair, u32 cm) |
| { |
| struct nlattr *nest; |
| int ret = -EMSGSIZE; |
| |
| nest = nla_nest_start(phydev->skb, |
| ETHTOOL_A_CABLE_NEST_FAULT_LENGTH); |
| if (!nest) |
| return -EMSGSIZE; |
| |
| if (nla_put_u8(phydev->skb, ETHTOOL_A_CABLE_FAULT_LENGTH_PAIR, pair)) |
| goto err; |
| if (nla_put_u32(phydev->skb, ETHTOOL_A_CABLE_FAULT_LENGTH_CM, cm)) |
| goto err; |
| |
| nla_nest_end(phydev->skb, nest); |
| return 0; |
| |
| err: |
| nla_nest_cancel(phydev->skb, nest); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ethnl_cable_test_fault_length); |
| |
| struct cable_test_tdr_req_info { |
| struct ethnl_req_info base; |
| }; |
| |
| static const struct nla_policy cable_test_tdr_act_cfg_policy[] = { |
| [ETHTOOL_A_CABLE_TEST_TDR_CFG_FIRST] = { .type = NLA_U32 }, |
| [ETHTOOL_A_CABLE_TEST_TDR_CFG_LAST] = { .type = NLA_U32 }, |
| [ETHTOOL_A_CABLE_TEST_TDR_CFG_STEP] = { .type = NLA_U32 }, |
| [ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR] = { .type = NLA_U8 }, |
| }; |
| |
| const struct nla_policy ethnl_cable_test_tdr_act_policy[] = { |
| [ETHTOOL_A_CABLE_TEST_TDR_HEADER] = |
| NLA_POLICY_NESTED(ethnl_header_policy), |
| [ETHTOOL_A_CABLE_TEST_TDR_CFG] = { .type = NLA_NESTED }, |
| }; |
| |
| /* CABLE_TEST_TDR_ACT */ |
| static int ethnl_act_cable_test_tdr_cfg(const struct nlattr *nest, |
| struct genl_info *info, |
| struct phy_tdr_config *cfg) |
| { |
| struct nlattr *tb[ARRAY_SIZE(cable_test_tdr_act_cfg_policy)]; |
| int ret; |
| |
| cfg->first = 100; |
| cfg->step = 100; |
| cfg->last = MAX_CABLE_LENGTH_CM; |
| cfg->pair = PHY_PAIR_ALL; |
| |
| if (!nest) |
| return 0; |
| |
| ret = nla_parse_nested(tb, |
| ARRAY_SIZE(cable_test_tdr_act_cfg_policy) - 1, |
| nest, cable_test_tdr_act_cfg_policy, |
| info->extack); |
| if (ret < 0) |
| return ret; |
| |
| if (tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_FIRST]) |
| cfg->first = nla_get_u32( |
| tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_FIRST]); |
| |
| if (tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_LAST]) |
| cfg->last = nla_get_u32(tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_LAST]); |
| |
| if (tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_STEP]) |
| cfg->step = nla_get_u32(tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_STEP]); |
| |
| if (tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR]) { |
| cfg->pair = nla_get_u8(tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR]); |
| if (cfg->pair > ETHTOOL_A_CABLE_PAIR_D) { |
| NL_SET_ERR_MSG_ATTR( |
| info->extack, |
| tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR], |
| "invalid pair parameter"); |
| return -EINVAL; |
| } |
| } |
| |
| if (cfg->first > MAX_CABLE_LENGTH_CM) { |
| NL_SET_ERR_MSG_ATTR(info->extack, |
| tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_FIRST], |
| "invalid first parameter"); |
| return -EINVAL; |
| } |
| |
| if (cfg->last > MAX_CABLE_LENGTH_CM) { |
| NL_SET_ERR_MSG_ATTR(info->extack, |
| tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_LAST], |
| "invalid last parameter"); |
| return -EINVAL; |
| } |
| |
| if (cfg->first > cfg->last) { |
| NL_SET_ERR_MSG(info->extack, "invalid first/last parameter"); |
| return -EINVAL; |
| } |
| |
| if (!cfg->step) { |
| NL_SET_ERR_MSG_ATTR(info->extack, |
| tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_STEP], |
| "invalid step parameter"); |
| return -EINVAL; |
| } |
| |
| if (cfg->step > (cfg->last - cfg->first)) { |
| NL_SET_ERR_MSG_ATTR(info->extack, |
| tb[ETHTOOL_A_CABLE_TEST_TDR_CFG_STEP], |
| "step parameter too big"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| int ethnl_act_cable_test_tdr(struct sk_buff *skb, struct genl_info *info) |
| { |
| struct ethnl_req_info req_info = {}; |
| const struct ethtool_phy_ops *ops; |
| struct nlattr **tb = info->attrs; |
| struct phy_tdr_config cfg; |
| struct net_device *dev; |
| int ret; |
| |
| ret = ethnl_parse_header_dev_get(&req_info, |
| tb[ETHTOOL_A_CABLE_TEST_TDR_HEADER], |
| genl_info_net(info), info->extack, |
| true); |
| if (ret < 0) |
| return ret; |
| |
| dev = req_info.dev; |
| if (!dev->phydev) { |
| ret = -EOPNOTSUPP; |
| goto out_dev_put; |
| } |
| |
| ret = ethnl_act_cable_test_tdr_cfg(tb[ETHTOOL_A_CABLE_TEST_TDR_CFG], |
| info, &cfg); |
| if (ret) |
| goto out_dev_put; |
| |
| rtnl_lock(); |
| ops = ethtool_phy_ops; |
| if (!ops || !ops->start_cable_test_tdr) { |
| ret = -EOPNOTSUPP; |
| goto out_rtnl; |
| } |
| |
| ret = ethnl_ops_begin(dev); |
| if (ret < 0) |
| goto out_rtnl; |
| |
| ret = ops->start_cable_test_tdr(dev->phydev, info->extack, &cfg); |
| |
| ethnl_ops_complete(dev); |
| |
| if (!ret) |
| ethnl_cable_test_started(dev->phydev, |
| ETHTOOL_MSG_CABLE_TEST_TDR_NTF); |
| |
| out_rtnl: |
| rtnl_unlock(); |
| out_dev_put: |
| dev_put(dev); |
| return ret; |
| } |
| |
| int ethnl_cable_test_amplitude(struct phy_device *phydev, |
| u8 pair, s16 mV) |
| { |
| struct nlattr *nest; |
| int ret = -EMSGSIZE; |
| |
| nest = nla_nest_start(phydev->skb, |
| ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE); |
| if (!nest) |
| return -EMSGSIZE; |
| |
| if (nla_put_u8(phydev->skb, ETHTOOL_A_CABLE_AMPLITUDE_PAIR, pair)) |
| goto err; |
| if (nla_put_u16(phydev->skb, ETHTOOL_A_CABLE_AMPLITUDE_mV, mV)) |
| goto err; |
| |
| nla_nest_end(phydev->skb, nest); |
| return 0; |
| |
| err: |
| nla_nest_cancel(phydev->skb, nest); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ethnl_cable_test_amplitude); |
| |
| int ethnl_cable_test_pulse(struct phy_device *phydev, u16 mV) |
| { |
| struct nlattr *nest; |
| int ret = -EMSGSIZE; |
| |
| nest = nla_nest_start(phydev->skb, ETHTOOL_A_CABLE_TDR_NEST_PULSE); |
| if (!nest) |
| return -EMSGSIZE; |
| |
| if (nla_put_u16(phydev->skb, ETHTOOL_A_CABLE_PULSE_mV, mV)) |
| goto err; |
| |
| nla_nest_end(phydev->skb, nest); |
| return 0; |
| |
| err: |
| nla_nest_cancel(phydev->skb, nest); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ethnl_cable_test_pulse); |
| |
| int ethnl_cable_test_step(struct phy_device *phydev, u32 first, u32 last, |
| u32 step) |
| { |
| struct nlattr *nest; |
| int ret = -EMSGSIZE; |
| |
| nest = nla_nest_start(phydev->skb, ETHTOOL_A_CABLE_TDR_NEST_STEP); |
| if (!nest) |
| return -EMSGSIZE; |
| |
| if (nla_put_u32(phydev->skb, ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE, |
| first)) |
| goto err; |
| |
| if (nla_put_u32(phydev->skb, ETHTOOL_A_CABLE_STEP_LAST_DISTANCE, last)) |
| goto err; |
| |
| if (nla_put_u32(phydev->skb, ETHTOOL_A_CABLE_STEP_STEP_DISTANCE, step)) |
| goto err; |
| |
| nla_nest_end(phydev->skb, nest); |
| return 0; |
| |
| err: |
| nla_nest_cancel(phydev->skb, nest); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(ethnl_cable_test_step); |