| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // rt1308-sdw.c -- rt1308 ALSA SoC audio driver |
| // |
| // Copyright(c) 2019 Realtek Semiconductor Corp. |
| // |
| // |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/soundwire/sdw.h> |
| #include <linux/soundwire/sdw_type.h> |
| #include <linux/soundwire/sdw_registers.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/initval.h> |
| |
| #include "rt1308.h" |
| #include "rt1308-sdw.h" |
| |
| static bool rt1308_readable_register(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case 0x00e0: |
| case 0x00f0: |
| case 0x2f01 ... 0x2f07: |
| case 0x3000 ... 0x3001: |
| case 0x3004 ... 0x3005: |
| case 0x3008: |
| case 0x300a: |
| case 0xc000 ... 0xcff3: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool rt1308_volatile_register(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case 0x2f01 ... 0x2f07: |
| case 0x3000 ... 0x3001: |
| case 0x3004 ... 0x3005: |
| case 0x3008: |
| case 0x300a: |
| case 0xc000: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_config rt1308_sdw_regmap = { |
| .reg_bits = 32, |
| .val_bits = 8, |
| .readable_reg = rt1308_readable_register, |
| .volatile_reg = rt1308_volatile_register, |
| .max_register = 0xcfff, |
| .reg_defaults = rt1308_reg_defaults, |
| .num_reg_defaults = ARRAY_SIZE(rt1308_reg_defaults), |
| .cache_type = REGCACHE_RBTREE, |
| .use_single_read = true, |
| .use_single_write = true, |
| }; |
| |
| /* Bus clock frequency */ |
| #define RT1308_CLK_FREQ_9600000HZ 9600000 |
| #define RT1308_CLK_FREQ_12000000HZ 12000000 |
| #define RT1308_CLK_FREQ_6000000HZ 6000000 |
| #define RT1308_CLK_FREQ_4800000HZ 4800000 |
| #define RT1308_CLK_FREQ_2400000HZ 2400000 |
| #define RT1308_CLK_FREQ_12288000HZ 12288000 |
| |
| static int rt1308_clock_config(struct device *dev) |
| { |
| struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev); |
| unsigned int clk_freq, value; |
| |
| clk_freq = (rt1308->params.curr_dr_freq >> 1); |
| |
| switch (clk_freq) { |
| case RT1308_CLK_FREQ_12000000HZ: |
| value = 0x0; |
| break; |
| case RT1308_CLK_FREQ_6000000HZ: |
| value = 0x1; |
| break; |
| case RT1308_CLK_FREQ_9600000HZ: |
| value = 0x2; |
| break; |
| case RT1308_CLK_FREQ_4800000HZ: |
| value = 0x3; |
| break; |
| case RT1308_CLK_FREQ_2400000HZ: |
| value = 0x4; |
| break; |
| case RT1308_CLK_FREQ_12288000HZ: |
| value = 0x5; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| regmap_write(rt1308->regmap, 0xe0, value); |
| regmap_write(rt1308->regmap, 0xf0, value); |
| |
| dev_dbg(dev, "%s complete, clk_freq=%d\n", __func__, clk_freq); |
| |
| return 0; |
| } |
| |
| static int rt1308_read_prop(struct sdw_slave *slave) |
| { |
| struct sdw_slave_prop *prop = &slave->prop; |
| int nval, i; |
| u32 bit; |
| unsigned long addr; |
| struct sdw_dpn_prop *dpn; |
| |
| prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; |
| prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY; |
| |
| prop->paging_support = true; |
| |
| /* first we need to allocate memory for set bits in port lists */ |
| prop->source_ports = 0x00; /* BITMAP: 00010100 (not enable yet) */ |
| prop->sink_ports = 0x2; /* BITMAP: 00000010 */ |
| |
| /* for sink */ |
| nval = hweight32(prop->sink_ports); |
| prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, |
| sizeof(*prop->sink_dpn_prop), |
| GFP_KERNEL); |
| if (!prop->sink_dpn_prop) |
| return -ENOMEM; |
| |
| i = 0; |
| dpn = prop->sink_dpn_prop; |
| addr = prop->sink_ports; |
| for_each_set_bit(bit, &addr, 32) { |
| dpn[i].num = bit; |
| dpn[i].type = SDW_DPN_FULL; |
| dpn[i].simple_ch_prep_sm = true; |
| dpn[i].ch_prep_timeout = 10; |
| i++; |
| } |
| |
| /* set the timeout values */ |
| prop->clk_stop_timeout = 20; |
| |
| dev_dbg(&slave->dev, "%s\n", __func__); |
| |
| return 0; |
| } |
| |
| static int rt1308_io_init(struct device *dev, struct sdw_slave *slave) |
| { |
| struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev); |
| int ret = 0; |
| unsigned int efuse_m_btl_l, efuse_m_btl_r, tmp; |
| unsigned int efuse_c_btl_l, efuse_c_btl_r; |
| |
| if (rt1308->hw_init) |
| return 0; |
| |
| if (rt1308->first_hw_init) { |
| regcache_cache_only(rt1308->regmap, false); |
| regcache_cache_bypass(rt1308->regmap, true); |
| } |
| |
| /* |
| * PM runtime is only enabled when a Slave reports as Attached |
| */ |
| if (!rt1308->first_hw_init) { |
| /* set autosuspend parameters */ |
| pm_runtime_set_autosuspend_delay(&slave->dev, 3000); |
| pm_runtime_use_autosuspend(&slave->dev); |
| |
| /* update count of parent 'active' children */ |
| pm_runtime_set_active(&slave->dev); |
| |
| /* make sure the device does not suspend immediately */ |
| pm_runtime_mark_last_busy(&slave->dev); |
| |
| pm_runtime_enable(&slave->dev); |
| } |
| |
| pm_runtime_get_noresume(&slave->dev); |
| |
| /* sw reset */ |
| regmap_write(rt1308->regmap, RT1308_SDW_RESET, 0); |
| |
| /* read efuse */ |
| regmap_write(rt1308->regmap, 0xc360, 0x01); |
| regmap_write(rt1308->regmap, 0xc361, 0x80); |
| regmap_write(rt1308->regmap, 0xc7f0, 0x04); |
| regmap_write(rt1308->regmap, 0xc7f1, 0xfe); |
| msleep(100); |
| regmap_write(rt1308->regmap, 0xc7f0, 0x44); |
| msleep(20); |
| regmap_write(rt1308->regmap, 0xc240, 0x10); |
| |
| regmap_read(rt1308->regmap, 0xc861, &tmp); |
| efuse_m_btl_l = tmp; |
| regmap_read(rt1308->regmap, 0xc860, &tmp); |
| efuse_m_btl_l = efuse_m_btl_l | (tmp << 8); |
| regmap_read(rt1308->regmap, 0xc863, &tmp); |
| efuse_c_btl_l = tmp; |
| regmap_read(rt1308->regmap, 0xc862, &tmp); |
| efuse_c_btl_l = efuse_c_btl_l | (tmp << 8); |
| regmap_read(rt1308->regmap, 0xc871, &tmp); |
| efuse_m_btl_r = tmp; |
| regmap_read(rt1308->regmap, 0xc870, &tmp); |
| efuse_m_btl_r = efuse_m_btl_r | (tmp << 8); |
| regmap_read(rt1308->regmap, 0xc873, &tmp); |
| efuse_c_btl_r = tmp; |
| regmap_read(rt1308->regmap, 0xc872, &tmp); |
| efuse_c_btl_r = efuse_c_btl_r | (tmp << 8); |
| dev_dbg(&slave->dev, "%s m_btl_l=0x%x, m_btl_r=0x%x\n", __func__, |
| efuse_m_btl_l, efuse_m_btl_r); |
| dev_dbg(&slave->dev, "%s c_btl_l=0x%x, c_btl_r=0x%x\n", __func__, |
| efuse_c_btl_l, efuse_c_btl_r); |
| |
| /* initial settings */ |
| regmap_write(rt1308->regmap, 0xc103, 0xc0); |
| regmap_write(rt1308->regmap, 0xc030, 0x17); |
| regmap_write(rt1308->regmap, 0xc031, 0x81); |
| regmap_write(rt1308->regmap, 0xc032, 0x26); |
| regmap_write(rt1308->regmap, 0xc040, 0x80); |
| regmap_write(rt1308->regmap, 0xc041, 0x80); |
| regmap_write(rt1308->regmap, 0xc042, 0x06); |
| regmap_write(rt1308->regmap, 0xc052, 0x0a); |
| regmap_write(rt1308->regmap, 0xc080, 0x0a); |
| regmap_write(rt1308->regmap, 0xc060, 0x02); |
| regmap_write(rt1308->regmap, 0xc061, 0x75); |
| regmap_write(rt1308->regmap, 0xc062, 0x05); |
| regmap_write(rt1308->regmap, 0xc171, 0x07); |
| regmap_write(rt1308->regmap, 0xc173, 0x0d); |
| regmap_write(rt1308->regmap, 0xc311, 0x7f); |
| regmap_write(rt1308->regmap, 0xc900, 0x90); |
| regmap_write(rt1308->regmap, 0xc1a0, 0x84); |
| regmap_write(rt1308->regmap, 0xc1a1, 0x01); |
| regmap_write(rt1308->regmap, 0xc360, 0x78); |
| regmap_write(rt1308->regmap, 0xc361, 0x87); |
| regmap_write(rt1308->regmap, 0xc0a1, 0x71); |
| regmap_write(rt1308->regmap, 0xc210, 0x00); |
| regmap_write(rt1308->regmap, 0xc070, 0x00); |
| regmap_write(rt1308->regmap, 0xc100, 0xd7); |
| regmap_write(rt1308->regmap, 0xc101, 0xd7); |
| regmap_write(rt1308->regmap, 0xc300, 0x09); |
| |
| if (rt1308->first_hw_init) { |
| regcache_cache_bypass(rt1308->regmap, false); |
| regcache_mark_dirty(rt1308->regmap); |
| } else |
| rt1308->first_hw_init = true; |
| |
| /* Mark Slave initialization complete */ |
| rt1308->hw_init = true; |
| |
| pm_runtime_mark_last_busy(&slave->dev); |
| pm_runtime_put_autosuspend(&slave->dev); |
| |
| dev_dbg(&slave->dev, "%s hw_init complete\n", __func__); |
| |
| return ret; |
| } |
| |
| static int rt1308_update_status(struct sdw_slave *slave, |
| enum sdw_slave_status status) |
| { |
| struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(&slave->dev); |
| |
| /* Update the status */ |
| rt1308->status = status; |
| |
| if (status == SDW_SLAVE_UNATTACHED) |
| rt1308->hw_init = false; |
| |
| /* |
| * Perform initialization only if slave status is present and |
| * hw_init flag is false |
| */ |
| if (rt1308->hw_init || rt1308->status != SDW_SLAVE_ATTACHED) |
| return 0; |
| |
| /* perform I/O transfers required for Slave initialization */ |
| return rt1308_io_init(&slave->dev, slave); |
| } |
| |
| static int rt1308_bus_config(struct sdw_slave *slave, |
| struct sdw_bus_params *params) |
| { |
| struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(&slave->dev); |
| int ret; |
| |
| memcpy(&rt1308->params, params, sizeof(*params)); |
| |
| ret = rt1308_clock_config(&slave->dev); |
| if (ret < 0) |
| dev_err(&slave->dev, "Invalid clk config"); |
| |
| return ret; |
| } |
| |
| static int rt1308_interrupt_callback(struct sdw_slave *slave, |
| struct sdw_slave_intr_status *status) |
| { |
| dev_dbg(&slave->dev, |
| "%s control_port_stat=%x", __func__, status->control_port); |
| |
| return 0; |
| } |
| |
| static int rt1308_classd_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, int event) |
| { |
| struct snd_soc_component *component = |
| snd_soc_dapm_to_component(w->dapm); |
| |
| switch (event) { |
| case SND_SOC_DAPM_POST_PMU: |
| msleep(30); |
| snd_soc_component_update_bits(component, |
| RT1308_SDW_OFFSET | (RT1308_POWER_STATUS << 4), |
| 0x3, 0x3); |
| msleep(40); |
| break; |
| case SND_SOC_DAPM_PRE_PMD: |
| snd_soc_component_update_bits(component, |
| RT1308_SDW_OFFSET | (RT1308_POWER_STATUS << 4), |
| 0x3, 0); |
| usleep_range(150000, 200000); |
| break; |
| |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static const char * const rt1308_rx_data_ch_select[] = { |
| "LR", |
| "LL", |
| "RL", |
| "RR", |
| }; |
| |
| static SOC_ENUM_SINGLE_DECL(rt1308_rx_data_ch_enum, |
| RT1308_SDW_OFFSET | (RT1308_DATA_PATH << 4), 0, |
| rt1308_rx_data_ch_select); |
| |
| static const struct snd_kcontrol_new rt1308_snd_controls[] = { |
| |
| /* I2S Data Channel Selection */ |
| SOC_ENUM("RX Channel Select", rt1308_rx_data_ch_enum), |
| }; |
| |
| static const struct snd_kcontrol_new rt1308_sto_dac_l = |
| SOC_DAPM_SINGLE_AUTODISABLE("Switch", |
| RT1308_SDW_OFFSET_BYTE3 | (RT1308_DAC_SET << 4), |
| RT1308_DVOL_MUTE_L_EN_SFT, 1, 1); |
| |
| static const struct snd_kcontrol_new rt1308_sto_dac_r = |
| SOC_DAPM_SINGLE_AUTODISABLE("Switch", |
| RT1308_SDW_OFFSET_BYTE3 | (RT1308_DAC_SET << 4), |
| RT1308_DVOL_MUTE_R_EN_SFT, 1, 1); |
| |
| static const struct snd_soc_dapm_widget rt1308_dapm_widgets[] = { |
| /* Audio Interface */ |
| SND_SOC_DAPM_AIF_IN("AIF1RX", "DP1 Playback", 0, SND_SOC_NOPM, 0, 0), |
| |
| /* Supply Widgets */ |
| SND_SOC_DAPM_SUPPLY("MBIAS20U", |
| RT1308_SDW_OFFSET | (RT1308_POWER << 4), 7, 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("ALDO", |
| RT1308_SDW_OFFSET | (RT1308_POWER << 4), 6, 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("DBG", |
| RT1308_SDW_OFFSET | (RT1308_POWER << 4), 5, 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("DACL", |
| RT1308_SDW_OFFSET | (RT1308_POWER << 4), 4, 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("CLK25M", |
| RT1308_SDW_OFFSET | (RT1308_POWER << 4), 2, 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("ADC_R", |
| RT1308_SDW_OFFSET | (RT1308_POWER << 4), 1, 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("ADC_L", |
| RT1308_SDW_OFFSET | (RT1308_POWER << 4), 0, 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("DAC Power", |
| RT1308_SDW_OFFSET | (RT1308_POWER << 4), 3, 0, NULL, 0), |
| |
| SND_SOC_DAPM_SUPPLY("DLDO", |
| RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4), 5, 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("VREF", |
| RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4), 4, 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("MIXER_R", |
| RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4), 2, 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("MIXER_L", |
| RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4), 1, 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("MBIAS4U", |
| RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4), 0, 0, NULL, 0), |
| |
| SND_SOC_DAPM_SUPPLY("PLL2_LDO", |
| RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 4, 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("PLL2B", |
| RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 3, 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("PLL2F", |
| RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 2, 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("PLL2F2", |
| RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 1, 0, NULL, 0), |
| SND_SOC_DAPM_SUPPLY("PLL2B2", |
| RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 0, 0, NULL, 0), |
| |
| /* Digital Interface */ |
| SND_SOC_DAPM_DAC("DAC", NULL, SND_SOC_NOPM, 0, 0), |
| SND_SOC_DAPM_SWITCH("DAC L", SND_SOC_NOPM, 0, 0, &rt1308_sto_dac_l), |
| SND_SOC_DAPM_SWITCH("DAC R", SND_SOC_NOPM, 0, 0, &rt1308_sto_dac_r), |
| |
| /* Output Lines */ |
| SND_SOC_DAPM_PGA_E("CLASS D", SND_SOC_NOPM, 0, 0, NULL, 0, |
| rt1308_classd_event, |
| SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), |
| SND_SOC_DAPM_OUTPUT("SPOL"), |
| SND_SOC_DAPM_OUTPUT("SPOR"), |
| }; |
| |
| static const struct snd_soc_dapm_route rt1308_dapm_routes[] = { |
| |
| { "DAC", NULL, "AIF1RX" }, |
| |
| { "DAC", NULL, "MBIAS20U" }, |
| { "DAC", NULL, "ALDO" }, |
| { "DAC", NULL, "DBG" }, |
| { "DAC", NULL, "DACL" }, |
| { "DAC", NULL, "CLK25M" }, |
| { "DAC", NULL, "ADC_R" }, |
| { "DAC", NULL, "ADC_L" }, |
| { "DAC", NULL, "DLDO" }, |
| { "DAC", NULL, "VREF" }, |
| { "DAC", NULL, "MIXER_R" }, |
| { "DAC", NULL, "MIXER_L" }, |
| { "DAC", NULL, "MBIAS4U" }, |
| { "DAC", NULL, "PLL2_LDO" }, |
| { "DAC", NULL, "PLL2B" }, |
| { "DAC", NULL, "PLL2F" }, |
| { "DAC", NULL, "PLL2F2" }, |
| { "DAC", NULL, "PLL2B2" }, |
| |
| { "DAC L", "Switch", "DAC" }, |
| { "DAC R", "Switch", "DAC" }, |
| { "DAC L", NULL, "DAC Power" }, |
| { "DAC R", NULL, "DAC Power" }, |
| |
| { "CLASS D", NULL, "DAC L" }, |
| { "CLASS D", NULL, "DAC R" }, |
| { "SPOL", NULL, "CLASS D" }, |
| { "SPOR", NULL, "CLASS D" }, |
| }; |
| |
| static int rt1308_set_sdw_stream(struct snd_soc_dai *dai, void *sdw_stream, |
| int direction) |
| { |
| struct sdw_stream_data *stream; |
| |
| if (!sdw_stream) |
| return 0; |
| |
| stream = kzalloc(sizeof(*stream), GFP_KERNEL); |
| if (!stream) |
| return -ENOMEM; |
| |
| stream->sdw_stream = sdw_stream; |
| |
| /* Use tx_mask or rx_mask to configure stream tag and set dma_data */ |
| if (direction == SNDRV_PCM_STREAM_PLAYBACK) |
| dai->playback_dma_data = stream; |
| else |
| dai->capture_dma_data = stream; |
| |
| return 0; |
| } |
| |
| static void rt1308_sdw_shutdown(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct sdw_stream_data *stream; |
| |
| stream = snd_soc_dai_get_dma_data(dai, substream); |
| snd_soc_dai_set_dma_data(dai, substream, NULL); |
| kfree(stream); |
| } |
| |
| static int rt1308_sdw_set_tdm_slot(struct snd_soc_dai *dai, |
| unsigned int tx_mask, |
| unsigned int rx_mask, |
| int slots, int slot_width) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct rt1308_sdw_priv *rt1308 = |
| snd_soc_component_get_drvdata(component); |
| |
| if (tx_mask) |
| return -EINVAL; |
| |
| if (slots > 2) |
| return -EINVAL; |
| |
| rt1308->rx_mask = rx_mask; |
| rt1308->slots = slots; |
| /* slot_width is not used since it's irrelevant for SoundWire */ |
| |
| return 0; |
| } |
| |
| static int rt1308_sdw_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct rt1308_sdw_priv *rt1308 = |
| snd_soc_component_get_drvdata(component); |
| struct sdw_stream_config stream_config; |
| struct sdw_port_config port_config; |
| enum sdw_data_direction direction; |
| struct sdw_stream_data *stream; |
| int retval, port, num_channels, ch_mask; |
| |
| dev_dbg(dai->dev, "%s %s", __func__, dai->name); |
| stream = snd_soc_dai_get_dma_data(dai, substream); |
| |
| if (!stream) |
| return -EINVAL; |
| |
| if (!rt1308->sdw_slave) |
| return -EINVAL; |
| |
| /* SoundWire specific configuration */ |
| /* port 1 for playback */ |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| direction = SDW_DATA_DIR_RX; |
| port = 1; |
| } else { |
| return -EINVAL; |
| } |
| |
| if (rt1308->slots) { |
| num_channels = rt1308->slots; |
| ch_mask = rt1308->rx_mask; |
| } else { |
| num_channels = params_channels(params); |
| ch_mask = (1 << num_channels) - 1; |
| } |
| |
| stream_config.frame_rate = params_rate(params); |
| stream_config.ch_count = num_channels; |
| stream_config.bps = snd_pcm_format_width(params_format(params)); |
| stream_config.direction = direction; |
| |
| port_config.ch_mask = ch_mask; |
| port_config.num = port; |
| |
| retval = sdw_stream_add_slave(rt1308->sdw_slave, &stream_config, |
| &port_config, 1, stream->sdw_stream); |
| if (retval) { |
| dev_err(dai->dev, "Unable to configure port\n"); |
| return retval; |
| } |
| |
| return retval; |
| } |
| |
| static int rt1308_sdw_pcm_hw_free(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_component *component = dai->component; |
| struct rt1308_sdw_priv *rt1308 = |
| snd_soc_component_get_drvdata(component); |
| struct sdw_stream_data *stream = |
| snd_soc_dai_get_dma_data(dai, substream); |
| |
| if (!rt1308->sdw_slave) |
| return -EINVAL; |
| |
| sdw_stream_remove_slave(rt1308->sdw_slave, stream->sdw_stream); |
| return 0; |
| } |
| |
| /* |
| * slave_ops: callbacks for get_clock_stop_mode, clock_stop and |
| * port_prep are not defined for now |
| */ |
| static struct sdw_slave_ops rt1308_slave_ops = { |
| .read_prop = rt1308_read_prop, |
| .interrupt_callback = rt1308_interrupt_callback, |
| .update_status = rt1308_update_status, |
| .bus_config = rt1308_bus_config, |
| }; |
| |
| static const struct snd_soc_component_driver soc_component_sdw_rt1308 = { |
| .controls = rt1308_snd_controls, |
| .num_controls = ARRAY_SIZE(rt1308_snd_controls), |
| .dapm_widgets = rt1308_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(rt1308_dapm_widgets), |
| .dapm_routes = rt1308_dapm_routes, |
| .num_dapm_routes = ARRAY_SIZE(rt1308_dapm_routes), |
| }; |
| |
| static const struct snd_soc_dai_ops rt1308_aif_dai_ops = { |
| .hw_params = rt1308_sdw_hw_params, |
| .hw_free = rt1308_sdw_pcm_hw_free, |
| .set_sdw_stream = rt1308_set_sdw_stream, |
| .shutdown = rt1308_sdw_shutdown, |
| .set_tdm_slot = rt1308_sdw_set_tdm_slot, |
| }; |
| |
| #define RT1308_STEREO_RATES SNDRV_PCM_RATE_48000 |
| #define RT1308_FORMATS (SNDRV_PCM_FMTBIT_S8 | \ |
| SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S16_LE | \ |
| SNDRV_PCM_FMTBIT_S24_LE) |
| |
| static struct snd_soc_dai_driver rt1308_sdw_dai[] = { |
| { |
| .name = "rt1308-aif", |
| .playback = { |
| .stream_name = "DP1 Playback", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = RT1308_STEREO_RATES, |
| .formats = RT1308_FORMATS, |
| }, |
| .ops = &rt1308_aif_dai_ops, |
| }, |
| }; |
| |
| static int rt1308_sdw_init(struct device *dev, struct regmap *regmap, |
| struct sdw_slave *slave) |
| { |
| struct rt1308_sdw_priv *rt1308; |
| int ret; |
| |
| rt1308 = devm_kzalloc(dev, sizeof(*rt1308), GFP_KERNEL); |
| if (!rt1308) |
| return -ENOMEM; |
| |
| dev_set_drvdata(dev, rt1308); |
| rt1308->sdw_slave = slave; |
| rt1308->regmap = regmap; |
| |
| /* |
| * Mark hw_init to false |
| * HW init will be performed when device reports present |
| */ |
| rt1308->hw_init = false; |
| rt1308->first_hw_init = false; |
| |
| ret = devm_snd_soc_register_component(dev, |
| &soc_component_sdw_rt1308, |
| rt1308_sdw_dai, |
| ARRAY_SIZE(rt1308_sdw_dai)); |
| |
| dev_dbg(&slave->dev, "%s\n", __func__); |
| |
| return ret; |
| } |
| |
| static int rt1308_sdw_probe(struct sdw_slave *slave, |
| const struct sdw_device_id *id) |
| { |
| struct regmap *regmap; |
| |
| /* Regmap Initialization */ |
| regmap = devm_regmap_init_sdw(slave, &rt1308_sdw_regmap); |
| if (IS_ERR(regmap)) |
| return PTR_ERR(regmap); |
| |
| rt1308_sdw_init(&slave->dev, regmap, slave); |
| |
| return 0; |
| } |
| |
| static const struct sdw_device_id rt1308_id[] = { |
| SDW_SLAVE_ENTRY_EXT(0x025d, 0x1308, 0x2, 0, 0), |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(sdw, rt1308_id); |
| |
| static int __maybe_unused rt1308_dev_suspend(struct device *dev) |
| { |
| struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev); |
| |
| if (!rt1308->hw_init) |
| return 0; |
| |
| regcache_cache_only(rt1308->regmap, true); |
| |
| return 0; |
| } |
| |
| #define RT1308_PROBE_TIMEOUT 2000 |
| |
| static int __maybe_unused rt1308_dev_resume(struct device *dev) |
| { |
| struct sdw_slave *slave = dev_to_sdw_dev(dev); |
| struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev); |
| unsigned long time; |
| |
| if (!rt1308->hw_init) |
| return 0; |
| |
| if (!slave->unattach_request) |
| goto regmap_sync; |
| |
| time = wait_for_completion_timeout(&slave->initialization_complete, |
| msecs_to_jiffies(RT1308_PROBE_TIMEOUT)); |
| if (!time) { |
| dev_err(&slave->dev, "Initialization not complete, timed out\n"); |
| return -ETIMEDOUT; |
| } |
| |
| regmap_sync: |
| slave->unattach_request = 0; |
| regcache_cache_only(rt1308->regmap, false); |
| regcache_sync_region(rt1308->regmap, 0xc000, 0xcfff); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops rt1308_pm = { |
| SET_SYSTEM_SLEEP_PM_OPS(rt1308_dev_suspend, rt1308_dev_resume) |
| SET_RUNTIME_PM_OPS(rt1308_dev_suspend, rt1308_dev_resume, NULL) |
| }; |
| |
| static struct sdw_driver rt1308_sdw_driver = { |
| .driver = { |
| .name = "rt1308", |
| .owner = THIS_MODULE, |
| .pm = &rt1308_pm, |
| }, |
| .probe = rt1308_sdw_probe, |
| .ops = &rt1308_slave_ops, |
| .id_table = rt1308_id, |
| }; |
| module_sdw_driver(rt1308_sdw_driver); |
| |
| MODULE_DESCRIPTION("ASoC RT1308 driver SDW"); |
| MODULE_AUTHOR("Shuming Fan <shumingf@realtek.com>"); |
| MODULE_LICENSE("GPL v2"); |