| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Driver for Gateworks System Controller Hardware Monitor module |
| * |
| * Copyright (C) 2020 Gateworks Corporation |
| */ |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/mfd/gsc.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| |
| #include <linux/platform_data/gsc_hwmon.h> |
| |
| #define GSC_HWMON_MAX_TEMP_CH 16 |
| #define GSC_HWMON_MAX_IN_CH 16 |
| #define GSC_HWMON_MAX_FAN_CH 16 |
| |
| #define GSC_HWMON_RESOLUTION 12 |
| #define GSC_HWMON_VREF 2500 |
| |
| struct gsc_hwmon_data { |
| struct gsc_dev *gsc; |
| struct gsc_hwmon_platform_data *pdata; |
| struct regmap *regmap; |
| const struct gsc_hwmon_channel *temp_ch[GSC_HWMON_MAX_TEMP_CH]; |
| const struct gsc_hwmon_channel *in_ch[GSC_HWMON_MAX_IN_CH]; |
| const struct gsc_hwmon_channel *fan_ch[GSC_HWMON_MAX_FAN_CH]; |
| u32 temp_config[GSC_HWMON_MAX_TEMP_CH + 1]; |
| u32 in_config[GSC_HWMON_MAX_IN_CH + 1]; |
| u32 fan_config[GSC_HWMON_MAX_FAN_CH + 1]; |
| struct hwmon_channel_info temp_info; |
| struct hwmon_channel_info in_info; |
| struct hwmon_channel_info fan_info; |
| const struct hwmon_channel_info *info[4]; |
| struct hwmon_chip_info chip; |
| }; |
| |
| static struct regmap_bus gsc_hwmon_regmap_bus = { |
| .reg_read = gsc_read, |
| .reg_write = gsc_write, |
| }; |
| |
| static const struct regmap_config gsc_hwmon_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .cache_type = REGCACHE_NONE, |
| }; |
| |
| static ssize_t pwm_auto_point_temp_show(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct gsc_hwmon_data *hwmon = dev_get_drvdata(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| u8 reg = hwmon->pdata->fan_base + (2 * attr->index); |
| u8 regs[2]; |
| int ret; |
| |
| ret = regmap_bulk_read(hwmon->regmap, reg, regs, 2); |
| if (ret) |
| return ret; |
| |
| ret = regs[0] | regs[1] << 8; |
| return sprintf(buf, "%d\n", ret * 10); |
| } |
| |
| static ssize_t pwm_auto_point_temp_store(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct gsc_hwmon_data *hwmon = dev_get_drvdata(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| u8 reg = hwmon->pdata->fan_base + (2 * attr->index); |
| u8 regs[2]; |
| long temp; |
| int err; |
| |
| if (kstrtol(buf, 10, &temp)) |
| return -EINVAL; |
| |
| temp = clamp_val(temp, 0, 10000); |
| temp = DIV_ROUND_CLOSEST(temp, 10); |
| |
| regs[0] = temp & 0xff; |
| regs[1] = (temp >> 8) & 0xff; |
| err = regmap_bulk_write(hwmon->regmap, reg, regs, 2); |
| if (err) |
| return err; |
| |
| return count; |
| } |
| |
| static ssize_t pwm_auto_point_pwm_show(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| |
| return sprintf(buf, "%d\n", 255 * (50 + (attr->index * 10)) / 100); |
| } |
| |
| static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point1_pwm, pwm_auto_point_pwm, 0); |
| static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_temp, pwm_auto_point_temp, 0); |
| |
| static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point2_pwm, pwm_auto_point_pwm, 1); |
| static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_temp, pwm_auto_point_temp, 1); |
| |
| static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point3_pwm, pwm_auto_point_pwm, 2); |
| static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point3_temp, pwm_auto_point_temp, 2); |
| |
| static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point4_pwm, pwm_auto_point_pwm, 3); |
| static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point4_temp, pwm_auto_point_temp, 3); |
| |
| static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point5_pwm, pwm_auto_point_pwm, 4); |
| static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point5_temp, pwm_auto_point_temp, 4); |
| |
| static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point6_pwm, pwm_auto_point_pwm, 5); |
| static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point6_temp, pwm_auto_point_temp, 5); |
| |
| static struct attribute *gsc_hwmon_attributes[] = { |
| &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point5_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point5_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point6_pwm.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point6_temp.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group gsc_hwmon_group = { |
| .attrs = gsc_hwmon_attributes, |
| }; |
| __ATTRIBUTE_GROUPS(gsc_hwmon); |
| |
| static int |
| gsc_hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, |
| int channel, long *val) |
| { |
| struct gsc_hwmon_data *hwmon = dev_get_drvdata(dev); |
| const struct gsc_hwmon_channel *ch; |
| int sz, ret; |
| long tmp; |
| u8 buf[3]; |
| |
| switch (type) { |
| case hwmon_in: |
| ch = hwmon->in_ch[channel]; |
| break; |
| case hwmon_temp: |
| ch = hwmon->temp_ch[channel]; |
| break; |
| case hwmon_fan: |
| ch = hwmon->fan_ch[channel]; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| sz = (ch->mode == mode_voltage_24bit) ? 3 : 2; |
| ret = regmap_bulk_read(hwmon->regmap, ch->reg, buf, sz); |
| if (ret) |
| return ret; |
| |
| tmp = 0; |
| while (sz-- > 0) |
| tmp |= (buf[sz] << (8 * sz)); |
| |
| switch (ch->mode) { |
| case mode_temperature: |
| if (tmp > 0x8000) |
| tmp -= 0xffff; |
| tmp *= 100; /* convert to millidegrees celsius */ |
| break; |
| case mode_voltage_raw: |
| tmp = clamp_val(tmp, 0, BIT(GSC_HWMON_RESOLUTION)); |
| /* scale based on ref voltage and ADC resolution */ |
| tmp *= GSC_HWMON_VREF; |
| tmp >>= GSC_HWMON_RESOLUTION; |
| /* scale based on optional voltage divider */ |
| if (ch->vdiv[0] && ch->vdiv[1]) { |
| tmp *= (ch->vdiv[0] + ch->vdiv[1]); |
| tmp /= ch->vdiv[1]; |
| } |
| /* adjust by uV offset */ |
| tmp += ch->mvoffset; |
| break; |
| case mode_fan: |
| tmp *= 30; /* convert to revolutions per minute */ |
| break; |
| case mode_voltage_24bit: |
| case mode_voltage_16bit: |
| /* no adjustment needed */ |
| break; |
| } |
| |
| *val = tmp; |
| |
| return 0; |
| } |
| |
| static int |
| gsc_hwmon_read_string(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, const char **buf) |
| { |
| struct gsc_hwmon_data *hwmon = dev_get_drvdata(dev); |
| |
| switch (type) { |
| case hwmon_in: |
| *buf = hwmon->in_ch[channel]->name; |
| break; |
| case hwmon_temp: |
| *buf = hwmon->temp_ch[channel]->name; |
| break; |
| case hwmon_fan: |
| *buf = hwmon->fan_ch[channel]->name; |
| break; |
| default: |
| return -ENOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static umode_t |
| gsc_hwmon_is_visible(const void *_data, enum hwmon_sensor_types type, u32 attr, |
| int ch) |
| { |
| return 0444; |
| } |
| |
| static const struct hwmon_ops gsc_hwmon_ops = { |
| .is_visible = gsc_hwmon_is_visible, |
| .read = gsc_hwmon_read, |
| .read_string = gsc_hwmon_read_string, |
| }; |
| |
| static struct gsc_hwmon_platform_data * |
| gsc_hwmon_get_devtree_pdata(struct device *dev) |
| { |
| struct gsc_hwmon_platform_data *pdata; |
| struct gsc_hwmon_channel *ch; |
| struct fwnode_handle *child; |
| struct device_node *fan; |
| int nchannels; |
| |
| nchannels = device_get_child_node_count(dev); |
| if (nchannels == 0) |
| return ERR_PTR(-ENODEV); |
| |
| pdata = devm_kzalloc(dev, |
| sizeof(*pdata) + nchannels * sizeof(*ch), |
| GFP_KERNEL); |
| if (!pdata) |
| return ERR_PTR(-ENOMEM); |
| ch = (struct gsc_hwmon_channel *)(pdata + 1); |
| pdata->channels = ch; |
| pdata->nchannels = nchannels; |
| |
| /* fan controller base address */ |
| of_node_get(dev->parent->of_node); |
| fan = of_find_compatible_node(dev->parent->of_node, NULL, "gw,gsc-fan"); |
| if (fan && of_property_read_u32(fan, "reg", &pdata->fan_base)) { |
| of_node_put(fan); |
| dev_err(dev, "fan node without base\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| of_node_put(fan); |
| |
| /* allocate structures for channels and count instances of each type */ |
| device_for_each_child_node(dev, child) { |
| if (fwnode_property_read_string(child, "label", &ch->name)) { |
| dev_err(dev, "channel without label\n"); |
| fwnode_handle_put(child); |
| return ERR_PTR(-EINVAL); |
| } |
| if (fwnode_property_read_u32(child, "reg", &ch->reg)) { |
| dev_err(dev, "channel without reg\n"); |
| fwnode_handle_put(child); |
| return ERR_PTR(-EINVAL); |
| } |
| if (fwnode_property_read_u32(child, "gw,mode", &ch->mode)) { |
| dev_err(dev, "channel without mode\n"); |
| fwnode_handle_put(child); |
| return ERR_PTR(-EINVAL); |
| } |
| if (ch->mode > mode_max) { |
| dev_err(dev, "invalid channel mode\n"); |
| fwnode_handle_put(child); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| if (!fwnode_property_read_u32(child, |
| "gw,voltage-offset-microvolt", |
| &ch->mvoffset)) |
| ch->mvoffset /= 1000; |
| fwnode_property_read_u32_array(child, |
| "gw,voltage-divider-ohms", |
| ch->vdiv, ARRAY_SIZE(ch->vdiv)); |
| ch++; |
| } |
| |
| return pdata; |
| } |
| |
| static int gsc_hwmon_probe(struct platform_device *pdev) |
| { |
| struct gsc_dev *gsc = dev_get_drvdata(pdev->dev.parent); |
| struct device *dev = &pdev->dev; |
| struct device *hwmon_dev; |
| struct gsc_hwmon_platform_data *pdata = dev_get_platdata(dev); |
| struct gsc_hwmon_data *hwmon; |
| const struct attribute_group **groups; |
| int i, i_in, i_temp, i_fan; |
| |
| if (!pdata) { |
| pdata = gsc_hwmon_get_devtree_pdata(dev); |
| if (IS_ERR(pdata)) |
| return PTR_ERR(pdata); |
| } |
| |
| hwmon = devm_kzalloc(dev, sizeof(*hwmon), GFP_KERNEL); |
| if (!hwmon) |
| return -ENOMEM; |
| hwmon->gsc = gsc; |
| hwmon->pdata = pdata; |
| |
| hwmon->regmap = devm_regmap_init(dev, &gsc_hwmon_regmap_bus, |
| gsc->i2c_hwmon, |
| &gsc_hwmon_regmap_config); |
| if (IS_ERR(hwmon->regmap)) |
| return PTR_ERR(hwmon->regmap); |
| |
| for (i = 0, i_in = 0, i_temp = 0, i_fan = 0; i < hwmon->pdata->nchannels; i++) { |
| const struct gsc_hwmon_channel *ch = &pdata->channels[i]; |
| |
| switch (ch->mode) { |
| case mode_temperature: |
| if (i_temp == GSC_HWMON_MAX_TEMP_CH) { |
| dev_err(gsc->dev, "too many temp channels\n"); |
| return -EINVAL; |
| } |
| hwmon->temp_ch[i_temp] = ch; |
| hwmon->temp_config[i_temp] = HWMON_T_INPUT | |
| HWMON_T_LABEL; |
| i_temp++; |
| break; |
| case mode_fan: |
| if (i_fan == GSC_HWMON_MAX_FAN_CH) { |
| dev_err(gsc->dev, "too many fan channels\n"); |
| return -EINVAL; |
| } |
| hwmon->fan_ch[i_fan] = ch; |
| hwmon->fan_config[i_fan] = HWMON_F_INPUT | |
| HWMON_F_LABEL; |
| i_fan++; |
| break; |
| case mode_voltage_24bit: |
| case mode_voltage_16bit: |
| case mode_voltage_raw: |
| if (i_in == GSC_HWMON_MAX_IN_CH) { |
| dev_err(gsc->dev, "too many input channels\n"); |
| return -EINVAL; |
| } |
| hwmon->in_ch[i_in] = ch; |
| hwmon->in_config[i_in] = |
| HWMON_I_INPUT | HWMON_I_LABEL; |
| i_in++; |
| break; |
| default: |
| dev_err(gsc->dev, "invalid mode: %d\n", ch->mode); |
| return -EINVAL; |
| } |
| } |
| |
| /* setup config structures */ |
| hwmon->chip.ops = &gsc_hwmon_ops; |
| hwmon->chip.info = hwmon->info; |
| hwmon->info[0] = &hwmon->temp_info; |
| hwmon->info[1] = &hwmon->in_info; |
| hwmon->info[2] = &hwmon->fan_info; |
| hwmon->temp_info.type = hwmon_temp; |
| hwmon->temp_info.config = hwmon->temp_config; |
| hwmon->in_info.type = hwmon_in; |
| hwmon->in_info.config = hwmon->in_config; |
| hwmon->fan_info.type = hwmon_fan; |
| hwmon->fan_info.config = hwmon->fan_config; |
| |
| groups = pdata->fan_base ? gsc_hwmon_groups : NULL; |
| hwmon_dev = devm_hwmon_device_register_with_info(dev, |
| KBUILD_MODNAME, hwmon, |
| &hwmon->chip, groups); |
| return PTR_ERR_OR_ZERO(hwmon_dev); |
| } |
| |
| static const struct of_device_id gsc_hwmon_of_match[] = { |
| { .compatible = "gw,gsc-adc", }, |
| {} |
| }; |
| |
| static struct platform_driver gsc_hwmon_driver = { |
| .driver = { |
| .name = "gsc-hwmon", |
| .of_match_table = gsc_hwmon_of_match, |
| }, |
| .probe = gsc_hwmon_probe, |
| }; |
| |
| module_platform_driver(gsc_hwmon_driver); |
| |
| MODULE_AUTHOR("Tim Harvey <tharvey@gateworks.com>"); |
| MODULE_DESCRIPTION("GSC hardware monitor driver"); |
| MODULE_LICENSE("GPL v2"); |