| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * UART Link Layer for S3FWRN82 NCI based Driver |
| * |
| * Copyright (C) 2015 Samsung Electronics |
| * Robert Baldyga <r.baldyga@samsung.com> |
| * Copyright (C) 2020 Samsung Electronics |
| * Bongsu Jeon <bongsu.jeon@samsung.com> |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/nfc.h> |
| #include <linux/netdevice.h> |
| #include <linux/of.h> |
| #include <linux/serdev.h> |
| #include <linux/gpio.h> |
| #include <linux/of_gpio.h> |
| |
| #include "phy_common.h" |
| |
| #define S3FWRN82_NCI_HEADER 3 |
| #define S3FWRN82_NCI_IDX 2 |
| #define NCI_SKB_BUFF_LEN 258 |
| |
| struct s3fwrn82_uart_phy { |
| struct phy_common common; |
| struct serdev_device *ser_dev; |
| struct sk_buff *recv_skb; |
| }; |
| |
| static int s3fwrn82_uart_write(void *phy_id, struct sk_buff *out) |
| { |
| struct s3fwrn82_uart_phy *phy = phy_id; |
| int err; |
| |
| err = serdev_device_write(phy->ser_dev, |
| out->data, out->len, |
| MAX_SCHEDULE_TIMEOUT); |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| static const struct s3fwrn5_phy_ops uart_phy_ops = { |
| .set_wake = s3fwrn5_phy_set_wake, |
| .set_mode = s3fwrn5_phy_set_mode, |
| .get_mode = s3fwrn5_phy_get_mode, |
| .write = s3fwrn82_uart_write, |
| }; |
| |
| static int s3fwrn82_uart_read(struct serdev_device *serdev, |
| const unsigned char *data, |
| size_t count) |
| { |
| struct s3fwrn82_uart_phy *phy = serdev_device_get_drvdata(serdev); |
| size_t i; |
| |
| for (i = 0; i < count; i++) { |
| skb_put_u8(phy->recv_skb, *data++); |
| |
| if (phy->recv_skb->len < S3FWRN82_NCI_HEADER) |
| continue; |
| |
| if ((phy->recv_skb->len - S3FWRN82_NCI_HEADER) |
| < phy->recv_skb->data[S3FWRN82_NCI_IDX]) |
| continue; |
| |
| s3fwrn5_recv_frame(phy->common.ndev, phy->recv_skb, |
| phy->common.mode); |
| phy->recv_skb = alloc_skb(NCI_SKB_BUFF_LEN, GFP_KERNEL); |
| if (!phy->recv_skb) |
| return 0; |
| } |
| |
| return i; |
| } |
| |
| static const struct serdev_device_ops s3fwrn82_serdev_ops = { |
| .receive_buf = s3fwrn82_uart_read, |
| .write_wakeup = serdev_device_write_wakeup, |
| }; |
| |
| static const struct of_device_id s3fwrn82_uart_of_match[] = { |
| { .compatible = "samsung,s3fwrn82", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, s3fwrn82_uart_of_match); |
| |
| static int s3fwrn82_uart_parse_dt(struct serdev_device *serdev) |
| { |
| struct s3fwrn82_uart_phy *phy = serdev_device_get_drvdata(serdev); |
| struct device_node *np = serdev->dev.of_node; |
| |
| if (!np) |
| return -ENODEV; |
| |
| phy->common.gpio_en = of_get_named_gpio(np, "en-gpios", 0); |
| if (!gpio_is_valid(phy->common.gpio_en)) |
| return -ENODEV; |
| |
| phy->common.gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0); |
| if (!gpio_is_valid(phy->common.gpio_fw_wake)) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static int s3fwrn82_uart_probe(struct serdev_device *serdev) |
| { |
| struct s3fwrn82_uart_phy *phy; |
| int ret = -ENOMEM; |
| |
| phy = devm_kzalloc(&serdev->dev, sizeof(*phy), GFP_KERNEL); |
| if (!phy) |
| goto err_exit; |
| |
| phy->recv_skb = alloc_skb(NCI_SKB_BUFF_LEN, GFP_KERNEL); |
| if (!phy->recv_skb) |
| goto err_exit; |
| |
| mutex_init(&phy->common.mutex); |
| phy->common.mode = S3FWRN5_MODE_COLD; |
| |
| phy->ser_dev = serdev; |
| serdev_device_set_drvdata(serdev, phy); |
| serdev_device_set_client_ops(serdev, &s3fwrn82_serdev_ops); |
| ret = serdev_device_open(serdev); |
| if (ret) { |
| dev_err(&serdev->dev, "Unable to open device\n"); |
| goto err_skb; |
| } |
| |
| ret = serdev_device_set_baudrate(serdev, 115200); |
| if (ret != 115200) { |
| ret = -EINVAL; |
| goto err_serdev; |
| } |
| |
| serdev_device_set_flow_control(serdev, false); |
| |
| ret = s3fwrn82_uart_parse_dt(serdev); |
| if (ret < 0) |
| goto err_serdev; |
| |
| ret = devm_gpio_request_one(&phy->ser_dev->dev, phy->common.gpio_en, |
| GPIOF_OUT_INIT_HIGH, "s3fwrn82_en"); |
| if (ret < 0) |
| goto err_serdev; |
| |
| ret = devm_gpio_request_one(&phy->ser_dev->dev, |
| phy->common.gpio_fw_wake, |
| GPIOF_OUT_INIT_LOW, "s3fwrn82_fw_wake"); |
| if (ret < 0) |
| goto err_serdev; |
| |
| ret = s3fwrn5_probe(&phy->common.ndev, phy, &phy->ser_dev->dev, |
| &uart_phy_ops); |
| if (ret < 0) |
| goto err_serdev; |
| |
| return ret; |
| |
| err_serdev: |
| serdev_device_close(serdev); |
| err_skb: |
| kfree_skb(phy->recv_skb); |
| err_exit: |
| return ret; |
| } |
| |
| static void s3fwrn82_uart_remove(struct serdev_device *serdev) |
| { |
| struct s3fwrn82_uart_phy *phy = serdev_device_get_drvdata(serdev); |
| |
| s3fwrn5_remove(phy->common.ndev); |
| serdev_device_close(serdev); |
| kfree_skb(phy->recv_skb); |
| } |
| |
| static struct serdev_device_driver s3fwrn82_uart_driver = { |
| .probe = s3fwrn82_uart_probe, |
| .remove = s3fwrn82_uart_remove, |
| .driver = { |
| .name = "s3fwrn82_uart", |
| .of_match_table = s3fwrn82_uart_of_match, |
| }, |
| }; |
| |
| module_serdev_device_driver(s3fwrn82_uart_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("UART driver for Samsung NFC"); |
| MODULE_AUTHOR("Bongsu Jeon <bongsu.jeon@samsung.com>"); |