| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2018 Cadence Design Systems Inc. |
| * |
| * Author: Boris Brezillon <boris.brezillon@bootlin.com> |
| */ |
| |
| #include <linux/atomic.h> |
| #include <linux/bug.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/export.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/of.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/workqueue.h> |
| |
| #include "internals.h" |
| |
| static DEFINE_IDR(i3c_bus_idr); |
| static DEFINE_MUTEX(i3c_core_lock); |
| |
| /** |
| * i3c_bus_maintenance_lock - Lock the bus for a maintenance operation |
| * @bus: I3C bus to take the lock on |
| * |
| * This function takes the bus lock so that no other operations can occur on |
| * the bus. This is needed for all kind of bus maintenance operation, like |
| * - enabling/disabling slave events |
| * - re-triggering DAA |
| * - changing the dynamic address of a device |
| * - relinquishing mastership |
| * - ... |
| * |
| * The reason for this kind of locking is that we don't want drivers and core |
| * logic to rely on I3C device information that could be changed behind their |
| * back. |
| */ |
| static void i3c_bus_maintenance_lock(struct i3c_bus *bus) |
| { |
| down_write(&bus->lock); |
| } |
| |
| /** |
| * i3c_bus_maintenance_unlock - Release the bus lock after a maintenance |
| * operation |
| * @bus: I3C bus to release the lock on |
| * |
| * Should be called when the bus maintenance operation is done. See |
| * i3c_bus_maintenance_lock() for more details on what these maintenance |
| * operations are. |
| */ |
| static void i3c_bus_maintenance_unlock(struct i3c_bus *bus) |
| { |
| up_write(&bus->lock); |
| } |
| |
| /** |
| * i3c_bus_normaluse_lock - Lock the bus for a normal operation |
| * @bus: I3C bus to take the lock on |
| * |
| * This function takes the bus lock for any operation that is not a maintenance |
| * operation (see i3c_bus_maintenance_lock() for a non-exhaustive list of |
| * maintenance operations). Basically all communications with I3C devices are |
| * normal operations (HDR, SDR transfers or CCC commands that do not change bus |
| * state or I3C dynamic address). |
| * |
| * Note that this lock is not guaranteeing serialization of normal operations. |
| * In other words, transfer requests passed to the I3C master can be submitted |
| * in parallel and I3C master drivers have to use their own locking to make |
| * sure two different communications are not inter-mixed, or access to the |
| * output/input queue is not done while the engine is busy. |
| */ |
| void i3c_bus_normaluse_lock(struct i3c_bus *bus) |
| { |
| down_read(&bus->lock); |
| } |
| |
| /** |
| * i3c_bus_normaluse_unlock - Release the bus lock after a normal operation |
| * @bus: I3C bus to release the lock on |
| * |
| * Should be called when a normal operation is done. See |
| * i3c_bus_normaluse_lock() for more details on what these normal operations |
| * are. |
| */ |
| void i3c_bus_normaluse_unlock(struct i3c_bus *bus) |
| { |
| up_read(&bus->lock); |
| } |
| |
| static struct i3c_master_controller * |
| i3c_bus_to_i3c_master(struct i3c_bus *i3cbus) |
| { |
| return container_of(i3cbus, struct i3c_master_controller, bus); |
| } |
| |
| static struct i3c_master_controller *dev_to_i3cmaster(struct device *dev) |
| { |
| return container_of(dev, struct i3c_master_controller, dev); |
| } |
| |
| static const struct device_type i3c_device_type; |
| |
| static struct i3c_bus *dev_to_i3cbus(struct device *dev) |
| { |
| struct i3c_master_controller *master; |
| |
| if (dev->type == &i3c_device_type) |
| return dev_to_i3cdev(dev)->bus; |
| |
| master = dev_to_i3cmaster(dev); |
| |
| return &master->bus; |
| } |
| |
| static struct i3c_dev_desc *dev_to_i3cdesc(struct device *dev) |
| { |
| struct i3c_master_controller *master; |
| |
| if (dev->type == &i3c_device_type) |
| return dev_to_i3cdev(dev)->desc; |
| |
| master = dev_to_i3cmaster(dev); |
| |
| return master->this; |
| } |
| |
| static ssize_t bcr_show(struct device *dev, |
| struct device_attribute *da, |
| char *buf) |
| { |
| struct i3c_bus *bus = dev_to_i3cbus(dev); |
| struct i3c_dev_desc *desc; |
| ssize_t ret; |
| |
| i3c_bus_normaluse_lock(bus); |
| desc = dev_to_i3cdesc(dev); |
| ret = sprintf(buf, "%x\n", desc->info.bcr); |
| i3c_bus_normaluse_unlock(bus); |
| |
| return ret; |
| } |
| static DEVICE_ATTR_RO(bcr); |
| |
| static ssize_t dcr_show(struct device *dev, |
| struct device_attribute *da, |
| char *buf) |
| { |
| struct i3c_bus *bus = dev_to_i3cbus(dev); |
| struct i3c_dev_desc *desc; |
| ssize_t ret; |
| |
| i3c_bus_normaluse_lock(bus); |
| desc = dev_to_i3cdesc(dev); |
| ret = sprintf(buf, "%x\n", desc->info.dcr); |
| i3c_bus_normaluse_unlock(bus); |
| |
| return ret; |
| } |
| static DEVICE_ATTR_RO(dcr); |
| |
| static ssize_t pid_show(struct device *dev, |
| struct device_attribute *da, |
| char *buf) |
| { |
| struct i3c_bus *bus = dev_to_i3cbus(dev); |
| struct i3c_dev_desc *desc; |
| ssize_t ret; |
| |
| i3c_bus_normaluse_lock(bus); |
| desc = dev_to_i3cdesc(dev); |
| ret = sprintf(buf, "%llx\n", desc->info.pid); |
| i3c_bus_normaluse_unlock(bus); |
| |
| return ret; |
| } |
| static DEVICE_ATTR_RO(pid); |
| |
| static ssize_t dynamic_address_show(struct device *dev, |
| struct device_attribute *da, |
| char *buf) |
| { |
| struct i3c_bus *bus = dev_to_i3cbus(dev); |
| struct i3c_dev_desc *desc; |
| ssize_t ret; |
| |
| i3c_bus_normaluse_lock(bus); |
| desc = dev_to_i3cdesc(dev); |
| ret = sprintf(buf, "%02x\n", desc->info.dyn_addr); |
| i3c_bus_normaluse_unlock(bus); |
| |
| return ret; |
| } |
| static DEVICE_ATTR_RO(dynamic_address); |
| |
| static const char * const hdrcap_strings[] = { |
| "hdr-ddr", "hdr-tsp", "hdr-tsl", |
| }; |
| |
| static ssize_t hdrcap_show(struct device *dev, |
| struct device_attribute *da, |
| char *buf) |
| { |
| struct i3c_bus *bus = dev_to_i3cbus(dev); |
| struct i3c_dev_desc *desc; |
| ssize_t offset = 0, ret; |
| unsigned long caps; |
| int mode; |
| |
| i3c_bus_normaluse_lock(bus); |
| desc = dev_to_i3cdesc(dev); |
| caps = desc->info.hdr_cap; |
| for_each_set_bit(mode, &caps, 8) { |
| if (mode >= ARRAY_SIZE(hdrcap_strings)) |
| break; |
| |
| if (!hdrcap_strings[mode]) |
| continue; |
| |
| ret = sprintf(buf + offset, offset ? " %s" : "%s", |
| hdrcap_strings[mode]); |
| if (ret < 0) |
| goto out; |
| |
| offset += ret; |
| } |
| |
| ret = sprintf(buf + offset, "\n"); |
| if (ret < 0) |
| goto out; |
| |
| ret = offset + ret; |
| |
| out: |
| i3c_bus_normaluse_unlock(bus); |
| |
| return ret; |
| } |
| static DEVICE_ATTR_RO(hdrcap); |
| |
| static struct attribute *i3c_device_attrs[] = { |
| &dev_attr_bcr.attr, |
| &dev_attr_dcr.attr, |
| &dev_attr_pid.attr, |
| &dev_attr_dynamic_address.attr, |
| &dev_attr_hdrcap.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(i3c_device); |
| |
| static int i3c_device_uevent(struct device *dev, struct kobj_uevent_env *env) |
| { |
| struct i3c_device *i3cdev = dev_to_i3cdev(dev); |
| struct i3c_device_info devinfo; |
| u16 manuf, part, ext; |
| |
| i3c_device_get_info(i3cdev, &devinfo); |
| manuf = I3C_PID_MANUF_ID(devinfo.pid); |
| part = I3C_PID_PART_ID(devinfo.pid); |
| ext = I3C_PID_EXTRA_INFO(devinfo.pid); |
| |
| if (I3C_PID_RND_LOWER_32BITS(devinfo.pid)) |
| return add_uevent_var(env, "MODALIAS=i3c:dcr%02Xmanuf%04X", |
| devinfo.dcr, manuf); |
| |
| return add_uevent_var(env, |
| "MODALIAS=i3c:dcr%02Xmanuf%04Xpart%04xext%04x", |
| devinfo.dcr, manuf, part, ext); |
| } |
| |
| static const struct device_type i3c_device_type = { |
| .groups = i3c_device_groups, |
| .uevent = i3c_device_uevent, |
| }; |
| |
| static int i3c_device_match(struct device *dev, struct device_driver *drv) |
| { |
| struct i3c_device *i3cdev; |
| struct i3c_driver *i3cdrv; |
| |
| if (dev->type != &i3c_device_type) |
| return 0; |
| |
| i3cdev = dev_to_i3cdev(dev); |
| i3cdrv = drv_to_i3cdrv(drv); |
| if (i3c_device_match_id(i3cdev, i3cdrv->id_table)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int i3c_device_probe(struct device *dev) |
| { |
| struct i3c_device *i3cdev = dev_to_i3cdev(dev); |
| struct i3c_driver *driver = drv_to_i3cdrv(dev->driver); |
| |
| return driver->probe(i3cdev); |
| } |
| |
| static int i3c_device_remove(struct device *dev) |
| { |
| struct i3c_device *i3cdev = dev_to_i3cdev(dev); |
| struct i3c_driver *driver = drv_to_i3cdrv(dev->driver); |
| int ret; |
| |
| ret = driver->remove(i3cdev); |
| if (ret) |
| return ret; |
| |
| i3c_device_free_ibi(i3cdev); |
| |
| return ret; |
| } |
| |
| struct bus_type i3c_bus_type = { |
| .name = "i3c", |
| .match = i3c_device_match, |
| .probe = i3c_device_probe, |
| .remove = i3c_device_remove, |
| }; |
| |
| static enum i3c_addr_slot_status |
| i3c_bus_get_addr_slot_status(struct i3c_bus *bus, u16 addr) |
| { |
| int status, bitpos = addr * 2; |
| |
| if (addr > I2C_MAX_ADDR) |
| return I3C_ADDR_SLOT_RSVD; |
| |
| status = bus->addrslots[bitpos / BITS_PER_LONG]; |
| status >>= bitpos % BITS_PER_LONG; |
| |
| return status & I3C_ADDR_SLOT_STATUS_MASK; |
| } |
| |
| static void i3c_bus_set_addr_slot_status(struct i3c_bus *bus, u16 addr, |
| enum i3c_addr_slot_status status) |
| { |
| int bitpos = addr * 2; |
| unsigned long *ptr; |
| |
| if (addr > I2C_MAX_ADDR) |
| return; |
| |
| ptr = bus->addrslots + (bitpos / BITS_PER_LONG); |
| *ptr &= ~((unsigned long)I3C_ADDR_SLOT_STATUS_MASK << |
| (bitpos % BITS_PER_LONG)); |
| *ptr |= (unsigned long)status << (bitpos % BITS_PER_LONG); |
| } |
| |
| static bool i3c_bus_dev_addr_is_avail(struct i3c_bus *bus, u8 addr) |
| { |
| enum i3c_addr_slot_status status; |
| |
| status = i3c_bus_get_addr_slot_status(bus, addr); |
| |
| return status == I3C_ADDR_SLOT_FREE; |
| } |
| |
| static int i3c_bus_get_free_addr(struct i3c_bus *bus, u8 start_addr) |
| { |
| enum i3c_addr_slot_status status; |
| u8 addr; |
| |
| for (addr = start_addr; addr < I3C_MAX_ADDR; addr++) { |
| status = i3c_bus_get_addr_slot_status(bus, addr); |
| if (status == I3C_ADDR_SLOT_FREE) |
| return addr; |
| } |
| |
| return -ENOMEM; |
| } |
| |
| static void i3c_bus_init_addrslots(struct i3c_bus *bus) |
| { |
| int i; |
| |
| /* Addresses 0 to 7 are reserved. */ |
| for (i = 0; i < 8; i++) |
| i3c_bus_set_addr_slot_status(bus, i, I3C_ADDR_SLOT_RSVD); |
| |
| /* |
| * Reserve broadcast address and all addresses that might collide |
| * with the broadcast address when facing a single bit error. |
| */ |
| i3c_bus_set_addr_slot_status(bus, I3C_BROADCAST_ADDR, |
| I3C_ADDR_SLOT_RSVD); |
| for (i = 0; i < 7; i++) |
| i3c_bus_set_addr_slot_status(bus, I3C_BROADCAST_ADDR ^ BIT(i), |
| I3C_ADDR_SLOT_RSVD); |
| } |
| |
| static void i3c_bus_cleanup(struct i3c_bus *i3cbus) |
| { |
| mutex_lock(&i3c_core_lock); |
| idr_remove(&i3c_bus_idr, i3cbus->id); |
| mutex_unlock(&i3c_core_lock); |
| } |
| |
| static int i3c_bus_init(struct i3c_bus *i3cbus) |
| { |
| int ret; |
| |
| init_rwsem(&i3cbus->lock); |
| INIT_LIST_HEAD(&i3cbus->devs.i2c); |
| INIT_LIST_HEAD(&i3cbus->devs.i3c); |
| i3c_bus_init_addrslots(i3cbus); |
| i3cbus->mode = I3C_BUS_MODE_PURE; |
| |
| mutex_lock(&i3c_core_lock); |
| ret = idr_alloc(&i3c_bus_idr, i3cbus, 0, 0, GFP_KERNEL); |
| mutex_unlock(&i3c_core_lock); |
| |
| if (ret < 0) |
| return ret; |
| |
| i3cbus->id = ret; |
| |
| return 0; |
| } |
| |
| static const char * const i3c_bus_mode_strings[] = { |
| [I3C_BUS_MODE_PURE] = "pure", |
| [I3C_BUS_MODE_MIXED_FAST] = "mixed-fast", |
| [I3C_BUS_MODE_MIXED_LIMITED] = "mixed-limited", |
| [I3C_BUS_MODE_MIXED_SLOW] = "mixed-slow", |
| }; |
| |
| static ssize_t mode_show(struct device *dev, |
| struct device_attribute *da, |
| char *buf) |
| { |
| struct i3c_bus *i3cbus = dev_to_i3cbus(dev); |
| ssize_t ret; |
| |
| i3c_bus_normaluse_lock(i3cbus); |
| if (i3cbus->mode < 0 || |
| i3cbus->mode >= ARRAY_SIZE(i3c_bus_mode_strings) || |
| !i3c_bus_mode_strings[i3cbus->mode]) |
| ret = sprintf(buf, "unknown\n"); |
| else |
| ret = sprintf(buf, "%s\n", i3c_bus_mode_strings[i3cbus->mode]); |
| i3c_bus_normaluse_unlock(i3cbus); |
| |
| return ret; |
| } |
| static DEVICE_ATTR_RO(mode); |
| |
| static ssize_t current_master_show(struct device *dev, |
| struct device_attribute *da, |
| char *buf) |
| { |
| struct i3c_bus *i3cbus = dev_to_i3cbus(dev); |
| ssize_t ret; |
| |
| i3c_bus_normaluse_lock(i3cbus); |
| ret = sprintf(buf, "%d-%llx\n", i3cbus->id, |
| i3cbus->cur_master->info.pid); |
| i3c_bus_normaluse_unlock(i3cbus); |
| |
| return ret; |
| } |
| static DEVICE_ATTR_RO(current_master); |
| |
| static ssize_t i3c_scl_frequency_show(struct device *dev, |
| struct device_attribute *da, |
| char *buf) |
| { |
| struct i3c_bus *i3cbus = dev_to_i3cbus(dev); |
| ssize_t ret; |
| |
| i3c_bus_normaluse_lock(i3cbus); |
| ret = sprintf(buf, "%ld\n", i3cbus->scl_rate.i3c); |
| i3c_bus_normaluse_unlock(i3cbus); |
| |
| return ret; |
| } |
| static DEVICE_ATTR_RO(i3c_scl_frequency); |
| |
| static ssize_t i2c_scl_frequency_show(struct device *dev, |
| struct device_attribute *da, |
| char *buf) |
| { |
| struct i3c_bus *i3cbus = dev_to_i3cbus(dev); |
| ssize_t ret; |
| |
| i3c_bus_normaluse_lock(i3cbus); |
| ret = sprintf(buf, "%ld\n", i3cbus->scl_rate.i2c); |
| i3c_bus_normaluse_unlock(i3cbus); |
| |
| return ret; |
| } |
| static DEVICE_ATTR_RO(i2c_scl_frequency); |
| |
| static struct attribute *i3c_masterdev_attrs[] = { |
| &dev_attr_mode.attr, |
| &dev_attr_current_master.attr, |
| &dev_attr_i3c_scl_frequency.attr, |
| &dev_attr_i2c_scl_frequency.attr, |
| &dev_attr_bcr.attr, |
| &dev_attr_dcr.attr, |
| &dev_attr_pid.attr, |
| &dev_attr_dynamic_address.attr, |
| &dev_attr_hdrcap.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(i3c_masterdev); |
| |
| static void i3c_masterdev_release(struct device *dev) |
| { |
| struct i3c_master_controller *master = dev_to_i3cmaster(dev); |
| struct i3c_bus *bus = dev_to_i3cbus(dev); |
| |
| if (master->wq) |
| destroy_workqueue(master->wq); |
| |
| WARN_ON(!list_empty(&bus->devs.i2c) || !list_empty(&bus->devs.i3c)); |
| i3c_bus_cleanup(bus); |
| |
| of_node_put(dev->of_node); |
| } |
| |
| static const struct device_type i3c_masterdev_type = { |
| .groups = i3c_masterdev_groups, |
| }; |
| |
| static int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode, |
| unsigned long max_i2c_scl_rate) |
| { |
| struct i3c_master_controller *master = i3c_bus_to_i3c_master(i3cbus); |
| |
| i3cbus->mode = mode; |
| |
| switch (i3cbus->mode) { |
| case I3C_BUS_MODE_PURE: |
| if (!i3cbus->scl_rate.i3c) |
| i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE; |
| break; |
| case I3C_BUS_MODE_MIXED_FAST: |
| case I3C_BUS_MODE_MIXED_LIMITED: |
| if (!i3cbus->scl_rate.i3c) |
| i3cbus->scl_rate.i3c = I3C_BUS_TYP_I3C_SCL_RATE; |
| if (!i3cbus->scl_rate.i2c) |
| i3cbus->scl_rate.i2c = max_i2c_scl_rate; |
| break; |
| case I3C_BUS_MODE_MIXED_SLOW: |
| if (!i3cbus->scl_rate.i2c) |
| i3cbus->scl_rate.i2c = max_i2c_scl_rate; |
| if (!i3cbus->scl_rate.i3c || |
| i3cbus->scl_rate.i3c > i3cbus->scl_rate.i2c) |
| i3cbus->scl_rate.i3c = i3cbus->scl_rate.i2c; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| dev_dbg(&master->dev, "i2c-scl = %ld Hz i3c-scl = %ld Hz\n", |
| i3cbus->scl_rate.i2c, i3cbus->scl_rate.i3c); |
| |
| /* |
| * I3C/I2C frequency may have been overridden, check that user-provided |
| * values are not exceeding max possible frequency. |
| */ |
| if (i3cbus->scl_rate.i3c > I3C_BUS_MAX_I3C_SCL_RATE || |
| i3cbus->scl_rate.i2c > I3C_BUS_I2C_FM_PLUS_SCL_RATE) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static struct i3c_master_controller * |
| i2c_adapter_to_i3c_master(struct i2c_adapter *adap) |
| { |
| return container_of(adap, struct i3c_master_controller, i2c); |
| } |
| |
| static struct i2c_adapter * |
| i3c_master_to_i2c_adapter(struct i3c_master_controller *master) |
| { |
| return &master->i2c; |
| } |
| |
| static void i3c_master_free_i2c_dev(struct i2c_dev_desc *dev) |
| { |
| kfree(dev); |
| } |
| |
| static struct i2c_dev_desc * |
| i3c_master_alloc_i2c_dev(struct i3c_master_controller *master, |
| const struct i2c_dev_boardinfo *boardinfo) |
| { |
| struct i2c_dev_desc *dev; |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) |
| return ERR_PTR(-ENOMEM); |
| |
| dev->common.master = master; |
| dev->boardinfo = boardinfo; |
| dev->addr = boardinfo->base.addr; |
| dev->lvr = boardinfo->lvr; |
| |
| return dev; |
| } |
| |
| static void *i3c_ccc_cmd_dest_init(struct i3c_ccc_cmd_dest *dest, u8 addr, |
| u16 payloadlen) |
| { |
| dest->addr = addr; |
| dest->payload.len = payloadlen; |
| if (payloadlen) |
| dest->payload.data = kzalloc(payloadlen, GFP_KERNEL); |
| else |
| dest->payload.data = NULL; |
| |
| return dest->payload.data; |
| } |
| |
| static void i3c_ccc_cmd_dest_cleanup(struct i3c_ccc_cmd_dest *dest) |
| { |
| kfree(dest->payload.data); |
| } |
| |
| static void i3c_ccc_cmd_init(struct i3c_ccc_cmd *cmd, bool rnw, u8 id, |
| struct i3c_ccc_cmd_dest *dests, |
| unsigned int ndests) |
| { |
| cmd->rnw = rnw ? 1 : 0; |
| cmd->id = id; |
| cmd->dests = dests; |
| cmd->ndests = ndests; |
| cmd->err = I3C_ERROR_UNKNOWN; |
| } |
| |
| static int i3c_master_send_ccc_cmd_locked(struct i3c_master_controller *master, |
| struct i3c_ccc_cmd *cmd) |
| { |
| int ret; |
| |
| if (!cmd || !master) |
| return -EINVAL; |
| |
| if (WARN_ON(master->init_done && |
| !rwsem_is_locked(&master->bus.lock))) |
| return -EINVAL; |
| |
| if (!master->ops->send_ccc_cmd) |
| return -ENOTSUPP; |
| |
| if ((cmd->id & I3C_CCC_DIRECT) && (!cmd->dests || !cmd->ndests)) |
| return -EINVAL; |
| |
| if (master->ops->supports_ccc_cmd && |
| !master->ops->supports_ccc_cmd(master, cmd)) |
| return -ENOTSUPP; |
| |
| ret = master->ops->send_ccc_cmd(master, cmd); |
| if (ret) { |
| if (cmd->err != I3C_ERROR_UNKNOWN) |
| return cmd->err; |
| |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static struct i2c_dev_desc * |
| i3c_master_find_i2c_dev_by_addr(const struct i3c_master_controller *master, |
| u16 addr) |
| { |
| struct i2c_dev_desc *dev; |
| |
| i3c_bus_for_each_i2cdev(&master->bus, dev) { |
| if (dev->boardinfo->base.addr == addr) |
| return dev; |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * i3c_master_get_free_addr() - get a free address on the bus |
| * @master: I3C master object |
| * @start_addr: where to start searching |
| * |
| * This function must be called with the bus lock held in write mode. |
| * |
| * Return: the first free address starting at @start_addr (included) or -ENOMEM |
| * if there's no more address available. |
| */ |
| int i3c_master_get_free_addr(struct i3c_master_controller *master, |
| u8 start_addr) |
| { |
| return i3c_bus_get_free_addr(&master->bus, start_addr); |
| } |
| EXPORT_SYMBOL_GPL(i3c_master_get_free_addr); |
| |
| static void i3c_device_release(struct device *dev) |
| { |
| struct i3c_device *i3cdev = dev_to_i3cdev(dev); |
| |
| WARN_ON(i3cdev->desc); |
| |
| of_node_put(i3cdev->dev.of_node); |
| kfree(i3cdev); |
| } |
| |
| static void i3c_master_free_i3c_dev(struct i3c_dev_desc *dev) |
| { |
| kfree(dev); |
| } |
| |
| static struct i3c_dev_desc * |
| i3c_master_alloc_i3c_dev(struct i3c_master_controller *master, |
| const struct i3c_device_info *info) |
| { |
| struct i3c_dev_desc *dev; |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) |
| return ERR_PTR(-ENOMEM); |
| |
| dev->common.master = master; |
| dev->info = *info; |
| mutex_init(&dev->ibi_lock); |
| |
| return dev; |
| } |
| |
| static int i3c_master_rstdaa_locked(struct i3c_master_controller *master, |
| u8 addr) |
| { |
| enum i3c_addr_slot_status addrstat; |
| struct i3c_ccc_cmd_dest dest; |
| struct i3c_ccc_cmd cmd; |
| int ret; |
| |
| if (!master) |
| return -EINVAL; |
| |
| addrstat = i3c_bus_get_addr_slot_status(&master->bus, addr); |
| if (addr != I3C_BROADCAST_ADDR && addrstat != I3C_ADDR_SLOT_I3C_DEV) |
| return -EINVAL; |
| |
| i3c_ccc_cmd_dest_init(&dest, addr, 0); |
| i3c_ccc_cmd_init(&cmd, false, |
| I3C_CCC_RSTDAA(addr == I3C_BROADCAST_ADDR), |
| &dest, 1); |
| ret = i3c_master_send_ccc_cmd_locked(master, &cmd); |
| i3c_ccc_cmd_dest_cleanup(&dest); |
| |
| return ret; |
| } |
| |
| /** |
| * i3c_master_entdaa_locked() - start a DAA (Dynamic Address Assignment) |
| * procedure |
| * @master: master used to send frames on the bus |
| * |
| * Send a ENTDAA CCC command to start a DAA procedure. |
| * |
| * Note that this function only sends the ENTDAA CCC command, all the logic |
| * behind dynamic address assignment has to be handled in the I3C master |
| * driver. |
| * |
| * This function must be called with the bus lock held in write mode. |
| * |
| * Return: 0 in case of success, a positive I3C error code if the error is |
| * one of the official Mx error codes, and a negative error code otherwise. |
| */ |
| int i3c_master_entdaa_locked(struct i3c_master_controller *master) |
| { |
| struct i3c_ccc_cmd_dest dest; |
| struct i3c_ccc_cmd cmd; |
| int ret; |
| |
| i3c_ccc_cmd_dest_init(&dest, I3C_BROADCAST_ADDR, 0); |
| i3c_ccc_cmd_init(&cmd, false, I3C_CCC_ENTDAA, &dest, 1); |
| ret = i3c_master_send_ccc_cmd_locked(master, &cmd); |
| i3c_ccc_cmd_dest_cleanup(&dest); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(i3c_master_entdaa_locked); |
| |
| static int i3c_master_enec_disec_locked(struct i3c_master_controller *master, |
| u8 addr, bool enable, u8 evts) |
| { |
| struct i3c_ccc_events *events; |
| struct i3c_ccc_cmd_dest dest; |
| struct i3c_ccc_cmd cmd; |
| int ret; |
| |
| events = i3c_ccc_cmd_dest_init(&dest, addr, sizeof(*events)); |
| if (!events) |
| return -ENOMEM; |
| |
| events->events = evts; |
| i3c_ccc_cmd_init(&cmd, false, |
| enable ? |
| I3C_CCC_ENEC(addr == I3C_BROADCAST_ADDR) : |
| I3C_CCC_DISEC(addr == I3C_BROADCAST_ADDR), |
| &dest, 1); |
| ret = i3c_master_send_ccc_cmd_locked(master, &cmd); |
| i3c_ccc_cmd_dest_cleanup(&dest); |
| |
| return ret; |
| } |
| |
| /** |
| * i3c_master_disec_locked() - send a DISEC CCC command |
| * @master: master used to send frames on the bus |
| * @addr: a valid I3C slave address or %I3C_BROADCAST_ADDR |
| * @evts: events to disable |
| * |
| * Send a DISEC CCC command to disable some or all events coming from a |
| * specific slave, or all devices if @addr is %I3C_BROADCAST_ADDR. |
| * |
| * This function must be called with the bus lock held in write mode. |
| * |
| * Return: 0 in case of success, a positive I3C error code if the error is |
| * one of the official Mx error codes, and a negative error code otherwise. |
| */ |
| int i3c_master_disec_locked(struct i3c_master_controller *master, u8 addr, |
| u8 evts) |
| { |
| return i3c_master_enec_disec_locked(master, addr, false, evts); |
| } |
| EXPORT_SYMBOL_GPL(i3c_master_disec_locked); |
| |
| /** |
| * i3c_master_enec_locked() - send an ENEC CCC command |
| * @master: master used to send frames on the bus |
| * @addr: a valid I3C slave address or %I3C_BROADCAST_ADDR |
| * @evts: events to disable |
| * |
| * Sends an ENEC CCC command to enable some or all events coming from a |
| * specific slave, or all devices if @addr is %I3C_BROADCAST_ADDR. |
| * |
| * This function must be called with the bus lock held in write mode. |
| * |
| * Return: 0 in case of success, a positive I3C error code if the error is |
| * one of the official Mx error codes, and a negative error code otherwise. |
| */ |
| int i3c_master_enec_locked(struct i3c_master_controller *master, u8 addr, |
| u8 evts) |
| { |
| return i3c_master_enec_disec_locked(master, addr, true, evts); |
| } |
| EXPORT_SYMBOL_GPL(i3c_master_enec_locked); |
| |
| /** |
| * i3c_master_defslvs_locked() - send a DEFSLVS CCC command |
| * @master: master used to send frames on the bus |
| * |
| * Send a DEFSLVS CCC command containing all the devices known to the @master. |
| * This is useful when you have secondary masters on the bus to propagate |
| * device information. |
| * |
| * This should be called after all I3C devices have been discovered (in other |
| * words, after the DAA procedure has finished) and instantiated in |
| * &i3c_master_controller_ops->bus_init(). |
| * It should also be called if a master ACKed an Hot-Join request and assigned |
| * a dynamic address to the device joining the bus. |
| * |
| * This function must be called with the bus lock held in write mode. |
| * |
| * Return: 0 in case of success, a positive I3C error code if the error is |
| * one of the official Mx error codes, and a negative error code otherwise. |
| */ |
| int i3c_master_defslvs_locked(struct i3c_master_controller *master) |
| { |
| struct i3c_ccc_defslvs *defslvs; |
| struct i3c_ccc_dev_desc *desc; |
| struct i3c_ccc_cmd_dest dest; |
| struct i3c_dev_desc *i3cdev; |
| struct i2c_dev_desc *i2cdev; |
| struct i3c_ccc_cmd cmd; |
| struct i3c_bus *bus; |
| bool send = false; |
| int ndevs = 0, ret; |
| |
| if (!master) |
| return -EINVAL; |
| |
| bus = i3c_master_get_bus(master); |
| i3c_bus_for_each_i3cdev(bus, i3cdev) { |
| ndevs++; |
| |
| if (i3cdev == master->this) |
| continue; |
| |
| if (I3C_BCR_DEVICE_ROLE(i3cdev->info.bcr) == |
| I3C_BCR_I3C_MASTER) |
| send = true; |
| } |
| |
| /* No other master on the bus, skip DEFSLVS. */ |
| if (!send) |
| return 0; |
| |
| i3c_bus_for_each_i2cdev(bus, i2cdev) |
| ndevs++; |
| |
| defslvs = i3c_ccc_cmd_dest_init(&dest, I3C_BROADCAST_ADDR, |
| struct_size(defslvs, slaves, |
| ndevs - 1)); |
| if (!defslvs) |
| return -ENOMEM; |
| |
| defslvs->count = ndevs; |
| defslvs->master.bcr = master->this->info.bcr; |
| defslvs->master.dcr = master->this->info.dcr; |
| defslvs->master.dyn_addr = master->this->info.dyn_addr << 1; |
| defslvs->master.static_addr = I3C_BROADCAST_ADDR << 1; |
| |
| desc = defslvs->slaves; |
| i3c_bus_for_each_i2cdev(bus, i2cdev) { |
| desc->lvr = i2cdev->lvr; |
| desc->static_addr = i2cdev->addr << 1; |
| desc++; |
| } |
| |
| i3c_bus_for_each_i3cdev(bus, i3cdev) { |
| /* Skip the I3C dev representing this master. */ |
| if (i3cdev == master->this) |
| continue; |
| |
| desc->bcr = i3cdev->info.bcr; |
| desc->dcr = i3cdev->info.dcr; |
| desc->dyn_addr = i3cdev->info.dyn_addr << 1; |
| desc->static_addr = i3cdev->info.static_addr << 1; |
| desc++; |
| } |
| |
| i3c_ccc_cmd_init(&cmd, false, I3C_CCC_DEFSLVS, &dest, 1); |
| ret = i3c_master_send_ccc_cmd_locked(master, &cmd); |
| i3c_ccc_cmd_dest_cleanup(&dest); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(i3c_master_defslvs_locked); |
| |
| static int i3c_master_setda_locked(struct i3c_master_controller *master, |
| u8 oldaddr, u8 newaddr, bool setdasa) |
| { |
| struct i3c_ccc_cmd_dest dest; |
| struct i3c_ccc_setda *setda; |
| struct i3c_ccc_cmd cmd; |
| int ret; |
| |
| if (!oldaddr || !newaddr) |
| return -EINVAL; |
| |
| setda = i3c_ccc_cmd_dest_init(&dest, oldaddr, sizeof(*setda)); |
| if (!setda) |
| return -ENOMEM; |
| |
| setda->addr = newaddr << 1; |
| i3c_ccc_cmd_init(&cmd, false, |
| setdasa ? I3C_CCC_SETDASA : I3C_CCC_SETNEWDA, |
| &dest, 1); |
| ret = i3c_master_send_ccc_cmd_locked(master, &cmd); |
| i3c_ccc_cmd_dest_cleanup(&dest); |
| |
| return ret; |
| } |
| |
| static int i3c_master_setdasa_locked(struct i3c_master_controller *master, |
| u8 static_addr, u8 dyn_addr) |
| { |
| return i3c_master_setda_locked(master, static_addr, dyn_addr, true); |
| } |
| |
| static int i3c_master_setnewda_locked(struct i3c_master_controller *master, |
| u8 oldaddr, u8 newaddr) |
| { |
| return i3c_master_setda_locked(master, oldaddr, newaddr, false); |
| } |
| |
| static int i3c_master_getmrl_locked(struct i3c_master_controller *master, |
| struct i3c_device_info *info) |
| { |
| struct i3c_ccc_cmd_dest dest; |
| unsigned int expected_len; |
| struct i3c_ccc_mrl *mrl; |
| struct i3c_ccc_cmd cmd; |
| int ret; |
| |
| mrl = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*mrl)); |
| if (!mrl) |
| return -ENOMEM; |
| |
| /* |
| * When the device does not have IBI payload GETMRL only returns 2 |
| * bytes of data. |
| */ |
| if (!(info->bcr & I3C_BCR_IBI_PAYLOAD)) |
| dest.payload.len -= 1; |
| |
| expected_len = dest.payload.len; |
| i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETMRL, &dest, 1); |
| ret = i3c_master_send_ccc_cmd_locked(master, &cmd); |
| if (ret) |
| goto out; |
| |
| if (dest.payload.len != expected_len) { |
| ret = -EIO; |
| goto out; |
| } |
| |
| info->max_read_len = be16_to_cpu(mrl->read_len); |
| |
| if (info->bcr & I3C_BCR_IBI_PAYLOAD) |
| info->max_ibi_len = mrl->ibi_len; |
| |
| out: |
| i3c_ccc_cmd_dest_cleanup(&dest); |
| |
| return ret; |
| } |
| |
| static int i3c_master_getmwl_locked(struct i3c_master_controller *master, |
| struct i3c_device_info *info) |
| { |
| struct i3c_ccc_cmd_dest dest; |
| struct i3c_ccc_mwl *mwl; |
| struct i3c_ccc_cmd cmd; |
| int ret; |
| |
| mwl = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*mwl)); |
| if (!mwl) |
| return -ENOMEM; |
| |
| i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETMWL, &dest, 1); |
| ret = i3c_master_send_ccc_cmd_locked(master, &cmd); |
| if (ret) |
| goto out; |
| |
| if (dest.payload.len != sizeof(*mwl)) { |
| ret = -EIO; |
| goto out; |
| } |
| |
| info->max_write_len = be16_to_cpu(mwl->len); |
| |
| out: |
| i3c_ccc_cmd_dest_cleanup(&dest); |
| |
| return ret; |
| } |
| |
| static int i3c_master_getmxds_locked(struct i3c_master_controller *master, |
| struct i3c_device_info *info) |
| { |
| struct i3c_ccc_getmxds *getmaxds; |
| struct i3c_ccc_cmd_dest dest; |
| struct i3c_ccc_cmd cmd; |
| int ret; |
| |
| getmaxds = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, |
| sizeof(*getmaxds)); |
| if (!getmaxds) |
| return -ENOMEM; |
| |
| i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETMXDS, &dest, 1); |
| ret = i3c_master_send_ccc_cmd_locked(master, &cmd); |
| if (ret) |
| goto out; |
| |
| if (dest.payload.len != 2 && dest.payload.len != 5) { |
| ret = -EIO; |
| goto out; |
| } |
| |
| info->max_read_ds = getmaxds->maxrd; |
| info->max_write_ds = getmaxds->maxwr; |
| if (dest.payload.len == 5) |
| info->max_read_turnaround = getmaxds->maxrdturn[0] | |
| ((u32)getmaxds->maxrdturn[1] << 8) | |
| ((u32)getmaxds->maxrdturn[2] << 16); |
| |
| out: |
| i3c_ccc_cmd_dest_cleanup(&dest); |
| |
| return ret; |
| } |
| |
| static int i3c_master_gethdrcap_locked(struct i3c_master_controller *master, |
| struct i3c_device_info *info) |
| { |
| struct i3c_ccc_gethdrcap *gethdrcap; |
| struct i3c_ccc_cmd_dest dest; |
| struct i3c_ccc_cmd cmd; |
| int ret; |
| |
| gethdrcap = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, |
| sizeof(*gethdrcap)); |
| if (!gethdrcap) |
| return -ENOMEM; |
| |
| i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETHDRCAP, &dest, 1); |
| ret = i3c_master_send_ccc_cmd_locked(master, &cmd); |
| if (ret) |
| goto out; |
| |
| if (dest.payload.len != 1) { |
| ret = -EIO; |
| goto out; |
| } |
| |
| info->hdr_cap = gethdrcap->modes; |
| |
| out: |
| i3c_ccc_cmd_dest_cleanup(&dest); |
| |
| return ret; |
| } |
| |
| static int i3c_master_getpid_locked(struct i3c_master_controller *master, |
| struct i3c_device_info *info) |
| { |
| struct i3c_ccc_getpid *getpid; |
| struct i3c_ccc_cmd_dest dest; |
| struct i3c_ccc_cmd cmd; |
| int ret, i; |
| |
| getpid = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*getpid)); |
| if (!getpid) |
| return -ENOMEM; |
| |
| i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETPID, &dest, 1); |
| ret = i3c_master_send_ccc_cmd_locked(master, &cmd); |
| if (ret) |
| goto out; |
| |
| info->pid = 0; |
| for (i = 0; i < sizeof(getpid->pid); i++) { |
| int sft = (sizeof(getpid->pid) - i - 1) * 8; |
| |
| info->pid |= (u64)getpid->pid[i] << sft; |
| } |
| |
| out: |
| i3c_ccc_cmd_dest_cleanup(&dest); |
| |
| return ret; |
| } |
| |
| static int i3c_master_getbcr_locked(struct i3c_master_controller *master, |
| struct i3c_device_info *info) |
| { |
| struct i3c_ccc_getbcr *getbcr; |
| struct i3c_ccc_cmd_dest dest; |
| struct i3c_ccc_cmd cmd; |
| int ret; |
| |
| getbcr = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*getbcr)); |
| if (!getbcr) |
| return -ENOMEM; |
| |
| i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETBCR, &dest, 1); |
| ret = i3c_master_send_ccc_cmd_locked(master, &cmd); |
| if (ret) |
| goto out; |
| |
| info->bcr = getbcr->bcr; |
| |
| out: |
| i3c_ccc_cmd_dest_cleanup(&dest); |
| |
| return ret; |
| } |
| |
| static int i3c_master_getdcr_locked(struct i3c_master_controller *master, |
| struct i3c_device_info *info) |
| { |
| struct i3c_ccc_getdcr *getdcr; |
| struct i3c_ccc_cmd_dest dest; |
| struct i3c_ccc_cmd cmd; |
| int ret; |
| |
| getdcr = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*getdcr)); |
| if (!getdcr) |
| return -ENOMEM; |
| |
| i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETDCR, &dest, 1); |
| ret = i3c_master_send_ccc_cmd_locked(master, &cmd); |
| if (ret) |
| goto out; |
| |
| info->dcr = getdcr->dcr; |
| |
| out: |
| i3c_ccc_cmd_dest_cleanup(&dest); |
| |
| return ret; |
| } |
| |
| static int i3c_master_retrieve_dev_info(struct i3c_dev_desc *dev) |
| { |
| struct i3c_master_controller *master = i3c_dev_get_master(dev); |
| enum i3c_addr_slot_status slot_status; |
| int ret; |
| |
| if (!dev->info.dyn_addr) |
| return -EINVAL; |
| |
| slot_status = i3c_bus_get_addr_slot_status(&master->bus, |
| dev->info.dyn_addr); |
| if (slot_status == I3C_ADDR_SLOT_RSVD || |
| slot_status == I3C_ADDR_SLOT_I2C_DEV) |
| return -EINVAL; |
| |
| ret = i3c_master_getpid_locked(master, &dev->info); |
| if (ret) |
| return ret; |
| |
| ret = i3c_master_getbcr_locked(master, &dev->info); |
| if (ret) |
| return ret; |
| |
| ret = i3c_master_getdcr_locked(master, &dev->info); |
| if (ret) |
| return ret; |
| |
| if (dev->info.bcr & I3C_BCR_MAX_DATA_SPEED_LIM) { |
| ret = i3c_master_getmxds_locked(master, &dev->info); |
| if (ret) |
| return ret; |
| } |
| |
| if (dev->info.bcr & I3C_BCR_IBI_PAYLOAD) |
| dev->info.max_ibi_len = 1; |
| |
| i3c_master_getmrl_locked(master, &dev->info); |
| i3c_master_getmwl_locked(master, &dev->info); |
| |
| if (dev->info.bcr & I3C_BCR_HDR_CAP) { |
| ret = i3c_master_gethdrcap_locked(master, &dev->info); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void i3c_master_put_i3c_addrs(struct i3c_dev_desc *dev) |
| { |
| struct i3c_master_controller *master = i3c_dev_get_master(dev); |
| |
| if (dev->info.static_addr) |
| i3c_bus_set_addr_slot_status(&master->bus, |
| dev->info.static_addr, |
| I3C_ADDR_SLOT_FREE); |
| |
| if (dev->info.dyn_addr) |
| i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr, |
| I3C_ADDR_SLOT_FREE); |
| |
| if (dev->boardinfo && dev->boardinfo->init_dyn_addr) |
| i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr, |
| I3C_ADDR_SLOT_FREE); |
| } |
| |
| static int i3c_master_get_i3c_addrs(struct i3c_dev_desc *dev) |
| { |
| struct i3c_master_controller *master = i3c_dev_get_master(dev); |
| enum i3c_addr_slot_status status; |
| |
| if (!dev->info.static_addr && !dev->info.dyn_addr) |
| return 0; |
| |
| if (dev->info.static_addr) { |
| status = i3c_bus_get_addr_slot_status(&master->bus, |
| dev->info.static_addr); |
| if (status != I3C_ADDR_SLOT_FREE) |
| return -EBUSY; |
| |
| i3c_bus_set_addr_slot_status(&master->bus, |
| dev->info.static_addr, |
| I3C_ADDR_SLOT_I3C_DEV); |
| } |
| |
| /* |
| * ->init_dyn_addr should have been reserved before that, so, if we're |
| * trying to apply a pre-reserved dynamic address, we should not try |
| * to reserve the address slot a second time. |
| */ |
| if (dev->info.dyn_addr && |
| (!dev->boardinfo || |
| dev->boardinfo->init_dyn_addr != dev->info.dyn_addr)) { |
| status = i3c_bus_get_addr_slot_status(&master->bus, |
| dev->info.dyn_addr); |
| if (status != I3C_ADDR_SLOT_FREE) |
| goto err_release_static_addr; |
| |
| i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr, |
| I3C_ADDR_SLOT_I3C_DEV); |
| } |
| |
| return 0; |
| |
| err_release_static_addr: |
| if (dev->info.static_addr) |
| i3c_bus_set_addr_slot_status(&master->bus, |
| dev->info.static_addr, |
| I3C_ADDR_SLOT_FREE); |
| |
| return -EBUSY; |
| } |
| |
| static int i3c_master_attach_i3c_dev(struct i3c_master_controller *master, |
| struct i3c_dev_desc *dev) |
| { |
| int ret; |
| |
| /* |
| * We don't attach devices to the controller until they are |
| * addressable on the bus. |
| */ |
| if (!dev->info.static_addr && !dev->info.dyn_addr) |
| return 0; |
| |
| ret = i3c_master_get_i3c_addrs(dev); |
| if (ret) |
| return ret; |
| |
| /* Do not attach the master device itself. */ |
| if (master->this != dev && master->ops->attach_i3c_dev) { |
| ret = master->ops->attach_i3c_dev(dev); |
| if (ret) { |
| i3c_master_put_i3c_addrs(dev); |
| return ret; |
| } |
| } |
| |
| list_add_tail(&dev->common.node, &master->bus.devs.i3c); |
| |
| return 0; |
| } |
| |
| static int i3c_master_reattach_i3c_dev(struct i3c_dev_desc *dev, |
| u8 old_dyn_addr) |
| { |
| struct i3c_master_controller *master = i3c_dev_get_master(dev); |
| enum i3c_addr_slot_status status; |
| int ret; |
| |
| if (dev->info.dyn_addr != old_dyn_addr) { |
| status = i3c_bus_get_addr_slot_status(&master->bus, |
| dev->info.dyn_addr); |
| if (status != I3C_ADDR_SLOT_FREE) |
| return -EBUSY; |
| i3c_bus_set_addr_slot_status(&master->bus, |
| dev->info.dyn_addr, |
| I3C_ADDR_SLOT_I3C_DEV); |
| } |
| |
| if (master->ops->reattach_i3c_dev) { |
| ret = master->ops->reattach_i3c_dev(dev, old_dyn_addr); |
| if (ret) { |
| i3c_master_put_i3c_addrs(dev); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void i3c_master_detach_i3c_dev(struct i3c_dev_desc *dev) |
| { |
| struct i3c_master_controller *master = i3c_dev_get_master(dev); |
| |
| /* Do not detach the master device itself. */ |
| if (master->this != dev && master->ops->detach_i3c_dev) |
| master->ops->detach_i3c_dev(dev); |
| |
| i3c_master_put_i3c_addrs(dev); |
| list_del(&dev->common.node); |
| } |
| |
| static int i3c_master_attach_i2c_dev(struct i3c_master_controller *master, |
| struct i2c_dev_desc *dev) |
| { |
| int ret; |
| |
| if (master->ops->attach_i2c_dev) { |
| ret = master->ops->attach_i2c_dev(dev); |
| if (ret) |
| return ret; |
| } |
| |
| list_add_tail(&dev->common.node, &master->bus.devs.i2c); |
| |
| return 0; |
| } |
| |
| static void i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev) |
| { |
| struct i3c_master_controller *master = i2c_dev_get_master(dev); |
| |
| list_del(&dev->common.node); |
| |
| if (master->ops->detach_i2c_dev) |
| master->ops->detach_i2c_dev(dev); |
| } |
| |
| static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev) |
| { |
| struct i3c_master_controller *master = i3c_dev_get_master(dev); |
| int ret; |
| |
| if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr || |
| !dev->boardinfo->static_addr) |
| return; |
| |
| ret = i3c_master_setdasa_locked(master, dev->info.static_addr, |
| dev->boardinfo->init_dyn_addr); |
| if (ret) |
| return; |
| |
| dev->info.dyn_addr = dev->boardinfo->init_dyn_addr; |
| ret = i3c_master_reattach_i3c_dev(dev, 0); |
| if (ret) |
| goto err_rstdaa; |
| |
| ret = i3c_master_retrieve_dev_info(dev); |
| if (ret) |
| goto err_rstdaa; |
| |
| return; |
| |
| err_rstdaa: |
| i3c_master_rstdaa_locked(master, dev->boardinfo->init_dyn_addr); |
| } |
| |
| static void |
| i3c_master_register_new_i3c_devs(struct i3c_master_controller *master) |
| { |
| struct i3c_dev_desc *desc; |
| int ret; |
| |
| if (!master->init_done) |
| return; |
| |
| i3c_bus_for_each_i3cdev(&master->bus, desc) { |
| if (desc->dev || !desc->info.dyn_addr || desc == master->this) |
| continue; |
| |
| desc->dev = kzalloc(sizeof(*desc->dev), GFP_KERNEL); |
| if (!desc->dev) |
| continue; |
| |
| desc->dev->bus = &master->bus; |
| desc->dev->desc = desc; |
| desc->dev->dev.parent = &master->dev; |
| desc->dev->dev.type = &i3c_device_type; |
| desc->dev->dev.bus = &i3c_bus_type; |
| desc->dev->dev.release = i3c_device_release; |
| dev_set_name(&desc->dev->dev, "%d-%llx", master->bus.id, |
| desc->info.pid); |
| |
| if (desc->boardinfo) |
| desc->dev->dev.of_node = desc->boardinfo->of_node; |
| |
| ret = device_register(&desc->dev->dev); |
| if (ret) |
| dev_err(&master->dev, |
| "Failed to add I3C device (err = %d)\n", ret); |
| } |
| } |
| |
| /** |
| * i3c_master_do_daa() - do a DAA (Dynamic Address Assignment) |
| * @master: master doing the DAA |
| * |
| * This function is instantiating an I3C device object and adding it to the |
| * I3C device list. All device information are automatically retrieved using |
| * standard CCC commands. |
| * |
| * The I3C device object is returned in case the master wants to attach |
| * private data to it using i3c_dev_set_master_data(). |
| * |
| * This function must be called with the bus lock held in write mode. |
| * |
| * Return: a 0 in case of success, an negative error code otherwise. |
| */ |
| int i3c_master_do_daa(struct i3c_master_controller *master) |
| { |
| int ret; |
| |
| i3c_bus_maintenance_lock(&master->bus); |
| ret = master->ops->do_daa(master); |
| i3c_bus_maintenance_unlock(&master->bus); |
| |
| if (ret) |
| return ret; |
| |
| i3c_bus_normaluse_lock(&master->bus); |
| i3c_master_register_new_i3c_devs(master); |
| i3c_bus_normaluse_unlock(&master->bus); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(i3c_master_do_daa); |
| |
| /** |
| * i3c_master_set_info() - set master device information |
| * @master: master used to send frames on the bus |
| * @info: I3C device information |
| * |
| * Set master device info. This should be called from |
| * &i3c_master_controller_ops->bus_init(). |
| * |
| * Not all &i3c_device_info fields are meaningful for a master device. |
| * Here is a list of fields that should be properly filled: |
| * |
| * - &i3c_device_info->dyn_addr |
| * - &i3c_device_info->bcr |
| * - &i3c_device_info->dcr |
| * - &i3c_device_info->pid |
| * - &i3c_device_info->hdr_cap if %I3C_BCR_HDR_CAP bit is set in |
| * &i3c_device_info->bcr |
| * |
| * This function must be called with the bus lock held in maintenance mode. |
| * |
| * Return: 0 if @info contains valid information (not every piece of |
| * information can be checked, but we can at least make sure @info->dyn_addr |
| * and @info->bcr are correct), -EINVAL otherwise. |
| */ |
| int i3c_master_set_info(struct i3c_master_controller *master, |
| const struct i3c_device_info *info) |
| { |
| struct i3c_dev_desc *i3cdev; |
| int ret; |
| |
| if (!i3c_bus_dev_addr_is_avail(&master->bus, info->dyn_addr)) |
| return -EINVAL; |
| |
| if (I3C_BCR_DEVICE_ROLE(info->bcr) == I3C_BCR_I3C_MASTER && |
| master->secondary) |
| return -EINVAL; |
| |
| if (master->this) |
| return -EINVAL; |
| |
| i3cdev = i3c_master_alloc_i3c_dev(master, info); |
| if (IS_ERR(i3cdev)) |
| return PTR_ERR(i3cdev); |
| |
| master->this = i3cdev; |
| master->bus.cur_master = master->this; |
| |
| ret = i3c_master_attach_i3c_dev(master, i3cdev); |
| if (ret) |
| goto err_free_dev; |
| |
| return 0; |
| |
| err_free_dev: |
| i3c_master_free_i3c_dev(i3cdev); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(i3c_master_set_info); |
| |
| static void i3c_master_detach_free_devs(struct i3c_master_controller *master) |
| { |
| struct i3c_dev_desc *i3cdev, *i3ctmp; |
| struct i2c_dev_desc *i2cdev, *i2ctmp; |
| |
| list_for_each_entry_safe(i3cdev, i3ctmp, &master->bus.devs.i3c, |
| common.node) { |
| i3c_master_detach_i3c_dev(i3cdev); |
| |
| if (i3cdev->boardinfo && i3cdev->boardinfo->init_dyn_addr) |
| i3c_bus_set_addr_slot_status(&master->bus, |
| i3cdev->boardinfo->init_dyn_addr, |
| I3C_ADDR_SLOT_FREE); |
| |
| i3c_master_free_i3c_dev(i3cdev); |
| } |
| |
| list_for_each_entry_safe(i2cdev, i2ctmp, &master->bus.devs.i2c, |
| common.node) { |
| i3c_master_detach_i2c_dev(i2cdev); |
| i3c_bus_set_addr_slot_status(&master->bus, |
| i2cdev->addr, |
| I3C_ADDR_SLOT_FREE); |
| i3c_master_free_i2c_dev(i2cdev); |
| } |
| } |
| |
| /** |
| * i3c_master_bus_init() - initialize an I3C bus |
| * @master: main master initializing the bus |
| * |
| * This function is following all initialisation steps described in the I3C |
| * specification: |
| * |
| * 1. Attach I2C and statically defined I3C devs to the master so that the |
| * master can fill its internal device table appropriately |
| * |
| * 2. Call &i3c_master_controller_ops->bus_init() method to initialize |
| * the master controller. That's usually where the bus mode is selected |
| * (pure bus or mixed fast/slow bus) |
| * |
| * 3. Instruct all devices on the bus to drop their dynamic address. This is |
| * particularly important when the bus was previously configured by someone |
| * else (for example the bootloader) |
| * |
| * 4. Disable all slave events. |
| * |
| * 5. Pre-assign dynamic addresses requested by the FW with SETDASA for I3C |
| * devices that have a static address |
| * |
| * 6. Do a DAA (Dynamic Address Assignment) to assign dynamic addresses to all |
| * remaining I3C devices |
| * |
| * Once this is done, all I3C and I2C devices should be usable. |
| * |
| * Return: a 0 in case of success, an negative error code otherwise. |
| */ |
| static int i3c_master_bus_init(struct i3c_master_controller *master) |
| { |
| enum i3c_addr_slot_status status; |
| struct i2c_dev_boardinfo *i2cboardinfo; |
| struct i3c_dev_boardinfo *i3cboardinfo; |
| struct i3c_dev_desc *i3cdev; |
| struct i2c_dev_desc *i2cdev; |
| int ret; |
| |
| /* |
| * First attach all devices with static definitions provided by the |
| * FW. |
| */ |
| list_for_each_entry(i2cboardinfo, &master->boardinfo.i2c, node) { |
| status = i3c_bus_get_addr_slot_status(&master->bus, |
| i2cboardinfo->base.addr); |
| if (status != I3C_ADDR_SLOT_FREE) { |
| ret = -EBUSY; |
| goto err_detach_devs; |
| } |
| |
| i3c_bus_set_addr_slot_status(&master->bus, |
| i2cboardinfo->base.addr, |
| I3C_ADDR_SLOT_I2C_DEV); |
| |
| i2cdev = i3c_master_alloc_i2c_dev(master, i2cboardinfo); |
| if (IS_ERR(i2cdev)) { |
| ret = PTR_ERR(i2cdev); |
| goto err_detach_devs; |
| } |
| |
| ret = i3c_master_attach_i2c_dev(master, i2cdev); |
| if (ret) { |
| i3c_master_free_i2c_dev(i2cdev); |
| goto err_detach_devs; |
| } |
| } |
| list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) { |
| struct i3c_device_info info = { |
| .static_addr = i3cboardinfo->static_addr, |
| }; |
| |
| if (i3cboardinfo->init_dyn_addr) { |
| status = i3c_bus_get_addr_slot_status(&master->bus, |
| i3cboardinfo->init_dyn_addr); |
| if (status != I3C_ADDR_SLOT_FREE) { |
| ret = -EBUSY; |
| goto err_detach_devs; |
| } |
| } |
| |
| i3cdev = i3c_master_alloc_i3c_dev(master, &info); |
| if (IS_ERR(i3cdev)) { |
| ret = PTR_ERR(i3cdev); |
| goto err_detach_devs; |
| } |
| |
| i3cdev->boardinfo = i3cboardinfo; |
| |
| ret = i3c_master_attach_i3c_dev(master, i3cdev); |
| if (ret) { |
| i3c_master_free_i3c_dev(i3cdev); |
| goto err_detach_devs; |
| } |
| } |
| |
| /* |
| * Now execute the controller specific ->bus_init() routine, which |
| * might configure its internal logic to match the bus limitations. |
| */ |
| ret = master->ops->bus_init(master); |
| if (ret) |
| goto err_detach_devs; |
| |
| /* |
| * The master device should have been instantiated in ->bus_init(), |
| * complain if this was not the case. |
| */ |
| if (!master->this) { |
| dev_err(&master->dev, |
| "master_set_info() was not called in ->bus_init()\n"); |
| ret = -EINVAL; |
| goto err_bus_cleanup; |
| } |
| |
| /* |
| * Reset all dynamic address that may have been assigned before |
| * (assigned by the bootloader for example). |
| */ |
| ret = i3c_master_rstdaa_locked(master, I3C_BROADCAST_ADDR); |
| if (ret && ret != I3C_ERROR_M2) |
| goto err_bus_cleanup; |
| |
| /* Disable all slave events before starting DAA. */ |
| ret = i3c_master_disec_locked(master, I3C_BROADCAST_ADDR, |
| I3C_CCC_EVENT_SIR | I3C_CCC_EVENT_MR | |
| I3C_CCC_EVENT_HJ); |
| if (ret && ret != I3C_ERROR_M2) |
| goto err_bus_cleanup; |
| |
| /* |
| * Pre-assign dynamic address and retrieve device information if |
| * needed. |
| */ |
| i3c_bus_for_each_i3cdev(&master->bus, i3cdev) |
| i3c_master_pre_assign_dyn_addr(i3cdev); |
| |
| ret = i3c_master_do_daa(master); |
| if (ret) |
| goto err_rstdaa; |
| |
| return 0; |
| |
| err_rstdaa: |
| i3c_master_rstdaa_locked(master, I3C_BROADCAST_ADDR); |
| |
| err_bus_cleanup: |
| if (master->ops->bus_cleanup) |
| master->ops->bus_cleanup(master); |
| |
| err_detach_devs: |
| i3c_master_detach_free_devs(master); |
| |
| return ret; |
| } |
| |
| static void i3c_master_bus_cleanup(struct i3c_master_controller *master) |
| { |
| if (master->ops->bus_cleanup) |
| master->ops->bus_cleanup(master); |
| |
| i3c_master_detach_free_devs(master); |
| } |
| |
| static struct i3c_dev_desc * |
| i3c_master_search_i3c_dev_duplicate(struct i3c_dev_desc *refdev) |
| { |
| struct i3c_master_controller *master = i3c_dev_get_master(refdev); |
| struct i3c_dev_desc *i3cdev; |
| |
| i3c_bus_for_each_i3cdev(&master->bus, i3cdev) { |
| if (i3cdev != refdev && i3cdev->info.pid == refdev->info.pid) |
| return i3cdev; |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * i3c_master_add_i3c_dev_locked() - add an I3C slave to the bus |
| * @master: master used to send frames on the bus |
| * @addr: I3C slave dynamic address assigned to the device |
| * |
| * This function is instantiating an I3C device object and adding it to the |
| * I3C device list. All device information are automatically retrieved using |
| * standard CCC commands. |
| * |
| * The I3C device object is returned in case the master wants to attach |
| * private data to it using i3c_dev_set_master_data(). |
| * |
| * This function must be called with the bus lock held in write mode. |
| * |
| * Return: a 0 in case of success, an negative error code otherwise. |
| */ |
| int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master, |
| u8 addr) |
| { |
| struct i3c_device_info info = { .dyn_addr = addr }; |
| struct i3c_dev_desc *newdev, *olddev; |
| u8 old_dyn_addr = addr, expected_dyn_addr; |
| struct i3c_ibi_setup ibireq = { }; |
| bool enable_ibi = false; |
| int ret; |
| |
| if (!master) |
| return -EINVAL; |
| |
| newdev = i3c_master_alloc_i3c_dev(master, &info); |
| if (IS_ERR(newdev)) |
| return PTR_ERR(newdev); |
| |
| ret = i3c_master_attach_i3c_dev(master, newdev); |
| if (ret) |
| goto err_free_dev; |
| |
| ret = i3c_master_retrieve_dev_info(newdev); |
| if (ret) |
| goto err_detach_dev; |
| |
| olddev = i3c_master_search_i3c_dev_duplicate(newdev); |
| if (olddev) { |
| newdev->boardinfo = olddev->boardinfo; |
| newdev->info.static_addr = olddev->info.static_addr; |
| newdev->dev = olddev->dev; |
| if (newdev->dev) |
| newdev->dev->desc = newdev; |
| |
| /* |
| * We need to restore the IBI state too, so let's save the |
| * IBI information and try to restore them after olddev has |
| * been detached+released and its IBI has been stopped and |
| * the associated resources have been freed. |
| */ |
| mutex_lock(&olddev->ibi_lock); |
| if (olddev->ibi) { |
| ibireq.handler = olddev->ibi->handler; |
| ibireq.max_payload_len = olddev->ibi->max_payload_len; |
| ibireq.num_slots = olddev->ibi->num_slots; |
| |
| if (olddev->ibi->enabled) { |
| enable_ibi = true; |
| i3c_dev_disable_ibi_locked(olddev); |
| } |
| |
| i3c_dev_free_ibi_locked(olddev); |
| } |
| mutex_unlock(&olddev->ibi_lock); |
| |
| old_dyn_addr = olddev->info.dyn_addr; |
| |
| i3c_master_detach_i3c_dev(olddev); |
| i3c_master_free_i3c_dev(olddev); |
| } |
| |
| ret = i3c_master_reattach_i3c_dev(newdev, old_dyn_addr); |
| if (ret) |
| goto err_detach_dev; |
| |
| /* |
| * Depending on our previous state, the expected dynamic address might |
| * differ: |
| * - if the device already had a dynamic address assigned, let's try to |
| * re-apply this one |
| * - if the device did not have a dynamic address and the firmware |
| * requested a specific address, pick this one |
| * - in any other case, keep the address automatically assigned by the |
| * master |
| */ |
| if (old_dyn_addr && old_dyn_addr != newdev->info.dyn_addr) |
| expected_dyn_addr = old_dyn_addr; |
| else if (newdev->boardinfo && newdev->boardinfo->init_dyn_addr) |
| expected_dyn_addr = newdev->boardinfo->init_dyn_addr; |
| else |
| expected_dyn_addr = newdev->info.dyn_addr; |
| |
| if (newdev->info.dyn_addr != expected_dyn_addr) { |
| /* |
| * Try to apply the expected dynamic address. If it fails, keep |
| * the address assigned by the master. |
| */ |
| ret = i3c_master_setnewda_locked(master, |
| newdev->info.dyn_addr, |
| expected_dyn_addr); |
| if (!ret) { |
| old_dyn_addr = newdev->info.dyn_addr; |
| newdev->info.dyn_addr = expected_dyn_addr; |
| i3c_master_reattach_i3c_dev(newdev, old_dyn_addr); |
| } else { |
| dev_err(&master->dev, |
| "Failed to assign reserved/old address to device %d%llx", |
| master->bus.id, newdev->info.pid); |
| } |
| } |
| |
| /* |
| * Now is time to try to restore the IBI setup. If we're lucky, |
| * everything works as before, otherwise, all we can do is complain. |
| * FIXME: maybe we should add callback to inform the driver that it |
| * should request the IBI again instead of trying to hide that from |
| * him. |
| */ |
| if (ibireq.handler) { |
| mutex_lock(&newdev->ibi_lock); |
| ret = i3c_dev_request_ibi_locked(newdev, &ibireq); |
| if (ret) { |
| dev_err(&master->dev, |
| "Failed to request IBI on device %d-%llx", |
| master->bus.id, newdev->info.pid); |
| } else if (enable_ibi) { |
| ret = i3c_dev_enable_ibi_locked(newdev); |
| if (ret) |
| dev_err(&master->dev, |
| "Failed to re-enable IBI on device %d-%llx", |
| master->bus.id, newdev->info.pid); |
| } |
| mutex_unlock(&newdev->ibi_lock); |
| } |
| |
| return 0; |
| |
| err_detach_dev: |
| if (newdev->dev && newdev->dev->desc) |
| newdev->dev->desc = NULL; |
| |
| i3c_master_detach_i3c_dev(newdev); |
| |
| err_free_dev: |
| i3c_master_free_i3c_dev(newdev); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(i3c_master_add_i3c_dev_locked); |
| |
| #define OF_I3C_REG1_IS_I2C_DEV BIT(31) |
| |
| static int |
| of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master, |
| struct device_node *node, u32 *reg) |
| { |
| struct i2c_dev_boardinfo *boardinfo; |
| struct device *dev = &master->dev; |
| int ret; |
| |
| boardinfo = devm_kzalloc(dev, sizeof(*boardinfo), GFP_KERNEL); |
| if (!boardinfo) |
| return -ENOMEM; |
| |
| ret = of_i2c_get_board_info(dev, node, &boardinfo->base); |
| if (ret) |
| return ret; |
| |
| /* |
| * The I3C Specification does not clearly say I2C devices with 10-bit |
| * address are supported. These devices can't be passed properly through |
| * DEFSLVS command. |
| */ |
| if (boardinfo->base.flags & I2C_CLIENT_TEN) { |
| dev_err(&master->dev, "I2C device with 10 bit address not supported."); |
| return -ENOTSUPP; |
| } |
| |
| /* LVR is encoded in reg[2]. */ |
| boardinfo->lvr = reg[2]; |
| |
| list_add_tail(&boardinfo->node, &master->boardinfo.i2c); |
| of_node_get(node); |
| |
| return 0; |
| } |
| |
| static int |
| of_i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master, |
| struct device_node *node, u32 *reg) |
| { |
| struct i3c_dev_boardinfo *boardinfo; |
| struct device *dev = &master->dev; |
| enum i3c_addr_slot_status addrstatus; |
| u32 init_dyn_addr = 0; |
| |
| boardinfo = devm_kzalloc(dev, sizeof(*boardinfo), GFP_KERNEL); |
| if (!boardinfo) |
| return -ENOMEM; |
| |
| if (reg[0]) { |
| if (reg[0] > I3C_MAX_ADDR) |
| return -EINVAL; |
| |
| addrstatus = i3c_bus_get_addr_slot_status(&master->bus, |
| reg[0]); |
| if (addrstatus != I3C_ADDR_SLOT_FREE) |
| return -EINVAL; |
| } |
| |
| boardinfo->static_addr = reg[0]; |
| |
| if (!of_property_read_u32(node, "assigned-address", &init_dyn_addr)) { |
| if (init_dyn_addr > I3C_MAX_ADDR) |
| return -EINVAL; |
| |
| addrstatus = i3c_bus_get_addr_slot_status(&master->bus, |
| init_dyn_addr); |
| if (addrstatus != I3C_ADDR_SLOT_FREE) |
| return -EINVAL; |
| } |
| |
| boardinfo->pid = ((u64)reg[1] << 32) | reg[2]; |
| |
| if ((boardinfo->pid & GENMASK_ULL(63, 48)) || |
| I3C_PID_RND_LOWER_32BITS(boardinfo->pid)) |
| return -EINVAL; |
| |
| boardinfo->init_dyn_addr = init_dyn_addr; |
| boardinfo->of_node = of_node_get(node); |
| list_add_tail(&boardinfo->node, &master->boardinfo.i3c); |
| |
| return 0; |
| } |
| |
| static int of_i3c_master_add_dev(struct i3c_master_controller *master, |
| struct device_node *node) |
| { |
| u32 reg[3]; |
| int ret; |
| |
| if (!master || !node) |
| return -EINVAL; |
| |
| ret = of_property_read_u32_array(node, "reg", reg, ARRAY_SIZE(reg)); |
| if (ret) |
| return ret; |
| |
| /* |
| * The manufacturer ID can't be 0. If reg[1] == 0 that means we're |
| * dealing with an I2C device. |
| */ |
| if (!reg[1]) |
| ret = of_i3c_master_add_i2c_boardinfo(master, node, reg); |
| else |
| ret = of_i3c_master_add_i3c_boardinfo(master, node, reg); |
| |
| return ret; |
| } |
| |
| static int of_populate_i3c_bus(struct i3c_master_controller *master) |
| { |
| struct device *dev = &master->dev; |
| struct device_node *i3cbus_np = dev->of_node; |
| struct device_node *node; |
| int ret; |
| u32 val; |
| |
| if (!i3cbus_np) |
| return 0; |
| |
| for_each_available_child_of_node(i3cbus_np, node) { |
| ret = of_i3c_master_add_dev(master, node); |
| if (ret) { |
| of_node_put(node); |
| return ret; |
| } |
| } |
| |
| /* |
| * The user might want to limit I2C and I3C speed in case some devices |
| * on the bus are not supporting typical rates, or if the bus topology |
| * prevents it from using max possible rate. |
| */ |
| if (!of_property_read_u32(i3cbus_np, "i2c-scl-hz", &val)) |
| master->bus.scl_rate.i2c = val; |
| |
| if (!of_property_read_u32(i3cbus_np, "i3c-scl-hz", &val)) |
| master->bus.scl_rate.i3c = val; |
| |
| return 0; |
| } |
| |
| static int i3c_master_i2c_adapter_xfer(struct i2c_adapter *adap, |
| struct i2c_msg *xfers, int nxfers) |
| { |
| struct i3c_master_controller *master = i2c_adapter_to_i3c_master(adap); |
| struct i2c_dev_desc *dev; |
| int i, ret; |
| u16 addr; |
| |
| if (!xfers || !master || nxfers <= 0) |
| return -EINVAL; |
| |
| if (!master->ops->i2c_xfers) |
| return -ENOTSUPP; |
| |
| /* Doing transfers to different devices is not supported. */ |
| addr = xfers[0].addr; |
| for (i = 1; i < nxfers; i++) { |
| if (addr != xfers[i].addr) |
| return -ENOTSUPP; |
| } |
| |
| i3c_bus_normaluse_lock(&master->bus); |
| dev = i3c_master_find_i2c_dev_by_addr(master, addr); |
| if (!dev) |
| ret = -ENOENT; |
| else |
| ret = master->ops->i2c_xfers(dev, xfers, nxfers); |
| i3c_bus_normaluse_unlock(&master->bus); |
| |
| return ret ? ret : nxfers; |
| } |
| |
| static u32 i3c_master_i2c_funcs(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C; |
| } |
| |
| static const struct i2c_algorithm i3c_master_i2c_algo = { |
| .master_xfer = i3c_master_i2c_adapter_xfer, |
| .functionality = i3c_master_i2c_funcs, |
| }; |
| |
| static int i3c_master_i2c_adapter_init(struct i3c_master_controller *master) |
| { |
| struct i2c_adapter *adap = i3c_master_to_i2c_adapter(master); |
| struct i2c_dev_desc *i2cdev; |
| int ret; |
| |
| adap->dev.parent = master->dev.parent; |
| adap->owner = master->dev.parent->driver->owner; |
| adap->algo = &i3c_master_i2c_algo; |
| strncpy(adap->name, dev_name(master->dev.parent), sizeof(adap->name)); |
| |
| /* FIXME: Should we allow i3c masters to override these values? */ |
| adap->timeout = 1000; |
| adap->retries = 3; |
| |
| ret = i2c_add_adapter(adap); |
| if (ret) |
| return ret; |
| |
| /* |
| * We silently ignore failures here. The bus should keep working |
| * correctly even if one or more i2c devices are not registered. |
| */ |
| i3c_bus_for_each_i2cdev(&master->bus, i2cdev) |
| i2cdev->dev = i2c_new_device(adap, &i2cdev->boardinfo->base); |
| |
| return 0; |
| } |
| |
| static void i3c_master_i2c_adapter_cleanup(struct i3c_master_controller *master) |
| { |
| struct i2c_dev_desc *i2cdev; |
| |
| i2c_del_adapter(&master->i2c); |
| |
| i3c_bus_for_each_i2cdev(&master->bus, i2cdev) |
| i2cdev->dev = NULL; |
| } |
| |
| static void i3c_master_unregister_i3c_devs(struct i3c_master_controller *master) |
| { |
| struct i3c_dev_desc *i3cdev; |
| |
| i3c_bus_for_each_i3cdev(&master->bus, i3cdev) { |
| if (!i3cdev->dev) |
| continue; |
| |
| i3cdev->dev->desc = NULL; |
| if (device_is_registered(&i3cdev->dev->dev)) |
| device_unregister(&i3cdev->dev->dev); |
| else |
| put_device(&i3cdev->dev->dev); |
| i3cdev->dev = NULL; |
| } |
| } |
| |
| /** |
| * i3c_master_queue_ibi() - Queue an IBI |
| * @dev: the device this IBI is coming from |
| * @slot: the IBI slot used to store the payload |
| * |
| * Queue an IBI to the controller workqueue. The IBI handler attached to |
| * the dev will be called from a workqueue context. |
| */ |
| void i3c_master_queue_ibi(struct i3c_dev_desc *dev, struct i3c_ibi_slot *slot) |
| { |
| atomic_inc(&dev->ibi->pending_ibis); |
| queue_work(dev->common.master->wq, &slot->work); |
| } |
| EXPORT_SYMBOL_GPL(i3c_master_queue_ibi); |
| |
| static void i3c_master_handle_ibi(struct work_struct *work) |
| { |
| struct i3c_ibi_slot *slot = container_of(work, struct i3c_ibi_slot, |
| work); |
| struct i3c_dev_desc *dev = slot->dev; |
| struct i3c_master_controller *master = i3c_dev_get_master(dev); |
| struct i3c_ibi_payload payload; |
| |
| payload.data = slot->data; |
| payload.len = slot->len; |
| |
| if (dev->dev) |
| dev->ibi->handler(dev->dev, &payload); |
| |
| master->ops->recycle_ibi_slot(dev, slot); |
| if (atomic_dec_and_test(&dev->ibi->pending_ibis)) |
| complete(&dev->ibi->all_ibis_handled); |
| } |
| |
| static void i3c_master_init_ibi_slot(struct i3c_dev_desc *dev, |
| struct i3c_ibi_slot *slot) |
| { |
| slot->dev = dev; |
| INIT_WORK(&slot->work, i3c_master_handle_ibi); |
| } |
| |
| struct i3c_generic_ibi_slot { |
| struct list_head node; |
| struct i3c_ibi_slot base; |
| }; |
| |
| struct i3c_generic_ibi_pool { |
| spinlock_t lock; |
| unsigned int num_slots; |
| struct i3c_generic_ibi_slot *slots; |
| void *payload_buf; |
| struct list_head free_slots; |
| struct list_head pending; |
| }; |
| |
| /** |
| * i3c_generic_ibi_free_pool() - Free a generic IBI pool |
| * @pool: the IBI pool to free |
| * |
| * Free all IBI slots allated by a generic IBI pool. |
| */ |
| void i3c_generic_ibi_free_pool(struct i3c_generic_ibi_pool *pool) |
| { |
| struct i3c_generic_ibi_slot *slot; |
| unsigned int nslots = 0; |
| |
| while (!list_empty(&pool->free_slots)) { |
| slot = list_first_entry(&pool->free_slots, |
| struct i3c_generic_ibi_slot, node); |
| list_del(&slot->node); |
| nslots++; |
| } |
| |
| /* |
| * If the number of freed slots is not equal to the number of allocated |
| * slots we have a leak somewhere. |
| */ |
| WARN_ON(nslots != pool->num_slots); |
| |
| kfree(pool->payload_buf); |
| kfree(pool->slots); |
| kfree(pool); |
| } |
| EXPORT_SYMBOL_GPL(i3c_generic_ibi_free_pool); |
| |
| /** |
| * i3c_generic_ibi_alloc_pool() - Create a generic IBI pool |
| * @dev: the device this pool will be used for |
| * @req: IBI setup request describing what the device driver expects |
| * |
| * Create a generic IBI pool based on the information provided in @req. |
| * |
| * Return: a valid IBI pool in case of success, an ERR_PTR() otherwise. |
| */ |
| struct i3c_generic_ibi_pool * |
| i3c_generic_ibi_alloc_pool(struct i3c_dev_desc *dev, |
| const struct i3c_ibi_setup *req) |
| { |
| struct i3c_generic_ibi_pool *pool; |
| struct i3c_generic_ibi_slot *slot; |
| unsigned int i; |
| int ret; |
| |
| pool = kzalloc(sizeof(*pool), GFP_KERNEL); |
| if (!pool) |
| return ERR_PTR(-ENOMEM); |
| |
| spin_lock_init(&pool->lock); |
| INIT_LIST_HEAD(&pool->free_slots); |
| INIT_LIST_HEAD(&pool->pending); |
| |
| pool->slots = kcalloc(req->num_slots, sizeof(*slot), GFP_KERNEL); |
| if (!pool->slots) { |
| ret = -ENOMEM; |
| goto err_free_pool; |
| } |
| |
| if (req->max_payload_len) { |
| pool->payload_buf = kcalloc(req->num_slots, |
| req->max_payload_len, GFP_KERNEL); |
| if (!pool->payload_buf) { |
| ret = -ENOMEM; |
| goto err_free_pool; |
| } |
| } |
| |
| for (i = 0; i < req->num_slots; i++) { |
| slot = &pool->slots[i]; |
| i3c_master_init_ibi_slot(dev, &slot->base); |
| |
| if (req->max_payload_len) |
| slot->base.data = pool->payload_buf + |
| (i * req->max_payload_len); |
| |
| list_add_tail(&slot->node, &pool->free_slots); |
| pool->num_slots++; |
| } |
| |
| return pool; |
| |
| err_free_pool: |
| i3c_generic_ibi_free_pool(pool); |
| return ERR_PTR(ret); |
| } |
| EXPORT_SYMBOL_GPL(i3c_generic_ibi_alloc_pool); |
| |
| /** |
| * i3c_generic_ibi_get_free_slot() - Get a free slot from a generic IBI pool |
| * @pool: the pool to query an IBI slot on |
| * |
| * Search for a free slot in a generic IBI pool. |
| * The slot should be returned to the pool using i3c_generic_ibi_recycle_slot() |
| * when it's no longer needed. |
| * |
| * Return: a pointer to a free slot, or NULL if there's no free slot available. |
| */ |
| struct i3c_ibi_slot * |
| i3c_generic_ibi_get_free_slot(struct i3c_generic_ibi_pool *pool) |
| { |
| struct i3c_generic_ibi_slot *slot; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pool->lock, flags); |
| slot = list_first_entry_or_null(&pool->free_slots, |
| struct i3c_generic_ibi_slot, node); |
| if (slot) |
| list_del(&slot->node); |
| spin_unlock_irqrestore(&pool->lock, flags); |
| |
| return slot ? &slot->base : NULL; |
| } |
| EXPORT_SYMBOL_GPL(i3c_generic_ibi_get_free_slot); |
| |
| /** |
| * i3c_generic_ibi_recycle_slot() - Return a slot to a generic IBI pool |
| * @pool: the pool to return the IBI slot to |
| * @s: IBI slot to recycle |
| * |
| * Add an IBI slot back to its generic IBI pool. Should be called from the |
| * master driver struct_master_controller_ops->recycle_ibi() method. |
| */ |
| void i3c_generic_ibi_recycle_slot(struct i3c_generic_ibi_pool *pool, |
| struct i3c_ibi_slot *s) |
| { |
| struct i3c_generic_ibi_slot *slot; |
| unsigned long flags; |
| |
| if (!s) |
| return; |
| |
| slot = container_of(s, struct i3c_generic_ibi_slot, base); |
| spin_lock_irqsave(&pool->lock, flags); |
| list_add_tail(&slot->node, &pool->free_slots); |
| spin_unlock_irqrestore(&pool->lock, flags); |
| } |
| EXPORT_SYMBOL_GPL(i3c_generic_ibi_recycle_slot); |
| |
| static int i3c_master_check_ops(const struct i3c_master_controller_ops *ops) |
| { |
| if (!ops || !ops->bus_init || !ops->priv_xfers || |
| !ops->send_ccc_cmd || !ops->do_daa || !ops->i2c_xfers) |
| return -EINVAL; |
| |
| if (ops->request_ibi && |
| (!ops->enable_ibi || !ops->disable_ibi || !ops->free_ibi || |
| !ops->recycle_ibi_slot)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /** |
| * i3c_master_register() - register an I3C master |
| * @master: master used to send frames on the bus |
| * @parent: the parent device (the one that provides this I3C master |
| * controller) |
| * @ops: the master controller operations |
| * @secondary: true if you are registering a secondary master. Will return |
| * -ENOTSUPP if set to true since secondary masters are not yet |
| * supported |
| * |
| * This function takes care of everything for you: |
| * |
| * - creates and initializes the I3C bus |
| * - populates the bus with static I2C devs if @parent->of_node is not |
| * NULL |
| * - registers all I3C devices added by the controller during bus |
| * initialization |
| * - registers the I2C adapter and all I2C devices |
| * |
| * Return: 0 in case of success, a negative error code otherwise. |
| */ |
| int i3c_master_register(struct i3c_master_controller *master, |
| struct device *parent, |
| const struct i3c_master_controller_ops *ops, |
| bool secondary) |
| { |
| unsigned long i2c_scl_rate = I3C_BUS_I2C_FM_PLUS_SCL_RATE; |
| struct i3c_bus *i3cbus = i3c_master_get_bus(master); |
| enum i3c_bus_mode mode = I3C_BUS_MODE_PURE; |
| struct i2c_dev_boardinfo *i2cbi; |
| int ret; |
| |
| /* We do not support secondary masters yet. */ |
| if (secondary) |
| return -ENOTSUPP; |
| |
| ret = i3c_master_check_ops(ops); |
| if (ret) |
| return ret; |
| |
| master->dev.parent = parent; |
| master->dev.of_node = of_node_get(parent->of_node); |
| master->dev.bus = &i3c_bus_type; |
| master->dev.type = &i3c_masterdev_type; |
| master->dev.release = i3c_masterdev_release; |
| master->ops = ops; |
| master->secondary = secondary; |
| INIT_LIST_HEAD(&master->boardinfo.i2c); |
| INIT_LIST_HEAD(&master->boardinfo.i3c); |
| |
| ret = i3c_bus_init(i3cbus); |
| if (ret) |
| return ret; |
| |
| device_initialize(&master->dev); |
| dev_set_name(&master->dev, "i3c-%d", i3cbus->id); |
| |
| ret = of_populate_i3c_bus(master); |
| if (ret) |
| goto err_put_dev; |
| |
| list_for_each_entry(i2cbi, &master->boardinfo.i2c, node) { |
| switch (i2cbi->lvr & I3C_LVR_I2C_INDEX_MASK) { |
| case I3C_LVR_I2C_INDEX(0): |
| if (mode < I3C_BUS_MODE_MIXED_FAST) |
| mode = I3C_BUS_MODE_MIXED_FAST; |
| break; |
| case I3C_LVR_I2C_INDEX(1): |
| if (mode < I3C_BUS_MODE_MIXED_LIMITED) |
| mode = I3C_BUS_MODE_MIXED_LIMITED; |
| break; |
| case I3C_LVR_I2C_INDEX(2): |
| if (mode < I3C_BUS_MODE_MIXED_SLOW) |
| mode = I3C_BUS_MODE_MIXED_SLOW; |
| break; |
| default: |
| ret = -EINVAL; |
| goto err_put_dev; |
| } |
| |
| if (i2cbi->lvr & I3C_LVR_I2C_FM_MODE) |
| i2c_scl_rate = I3C_BUS_I2C_FM_SCL_RATE; |
| } |
| |
| ret = i3c_bus_set_mode(i3cbus, mode, i2c_scl_rate); |
| if (ret) |
| goto err_put_dev; |
| |
| master->wq = alloc_workqueue("%s", 0, 0, dev_name(parent)); |
| if (!master->wq) { |
| ret = -ENOMEM; |
| goto err_put_dev; |
| } |
| |
| ret = i3c_master_bus_init(master); |
| if (ret) |
| goto err_put_dev; |
| |
| ret = device_add(&master->dev); |
| if (ret) |
| goto err_cleanup_bus; |
| |
| /* |
| * Expose our I3C bus as an I2C adapter so that I2C devices are exposed |
| * through the I2C subsystem. |
| */ |
| ret = i3c_master_i2c_adapter_init(master); |
| if (ret) |
| goto err_del_dev; |
| |
| /* |
| * We're done initializing the bus and the controller, we can now |
| * register I3C devices discovered during the initial DAA. |
| */ |
| master->init_done = true; |
| i3c_bus_normaluse_lock(&master->bus); |
| i3c_master_register_new_i3c_devs(master); |
| i3c_bus_normaluse_unlock(&master->bus); |
| |
| return 0; |
| |
| err_del_dev: |
| device_del(&master->dev); |
| |
| err_cleanup_bus: |
| i3c_master_bus_cleanup(master); |
| |
| err_put_dev: |
| put_device(&master->dev); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(i3c_master_register); |
| |
| /** |
| * i3c_master_unregister() - unregister an I3C master |
| * @master: master used to send frames on the bus |
| * |
| * Basically undo everything done in i3c_master_register(). |
| * |
| * Return: 0 in case of success, a negative error code otherwise. |
| */ |
| int i3c_master_unregister(struct i3c_master_controller *master) |
| { |
| i3c_master_i2c_adapter_cleanup(master); |
| i3c_master_unregister_i3c_devs(master); |
| i3c_master_bus_cleanup(master); |
| device_unregister(&master->dev); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(i3c_master_unregister); |
| |
| int i3c_dev_do_priv_xfers_locked(struct i3c_dev_desc *dev, |
| struct i3c_priv_xfer *xfers, |
| int nxfers) |
| { |
| struct i3c_master_controller *master; |
| |
| if (!dev) |
| return -ENOENT; |
| |
| master = i3c_dev_get_master(dev); |
| if (!master || !xfers) |
| return -EINVAL; |
| |
| if (!master->ops->priv_xfers) |
| return -ENOTSUPP; |
| |
| return master->ops->priv_xfers(dev, xfers, nxfers); |
| } |
| |
| int i3c_dev_disable_ibi_locked(struct i3c_dev_desc *dev) |
| { |
| struct i3c_master_controller *master; |
| int ret; |
| |
| if (!dev->ibi) |
| return -EINVAL; |
| |
| master = i3c_dev_get_master(dev); |
| ret = master->ops->disable_ibi(dev); |
| if (ret) |
| return ret; |
| |
| reinit_completion(&dev->ibi->all_ibis_handled); |
| if (atomic_read(&dev->ibi->pending_ibis)) |
| wait_for_completion(&dev->ibi->all_ibis_handled); |
| |
| dev->ibi->enabled = false; |
| |
| return 0; |
| } |
| |
| int i3c_dev_enable_ibi_locked(struct i3c_dev_desc *dev) |
| { |
| struct i3c_master_controller *master = i3c_dev_get_master(dev); |
| int ret; |
| |
| if (!dev->ibi) |
| return -EINVAL; |
| |
| ret = master->ops->enable_ibi(dev); |
| if (!ret) |
| dev->ibi->enabled = true; |
| |
| return ret; |
| } |
| |
| int i3c_dev_request_ibi_locked(struct i3c_dev_desc *dev, |
| const struct i3c_ibi_setup *req) |
| { |
| struct i3c_master_controller *master = i3c_dev_get_master(dev); |
| struct i3c_device_ibi_info *ibi; |
| int ret; |
| |
| if (!master->ops->request_ibi) |
| return -ENOTSUPP; |
| |
| if (dev->ibi) |
| return -EBUSY; |
| |
| ibi = kzalloc(sizeof(*ibi), GFP_KERNEL); |
| if (!ibi) |
| return -ENOMEM; |
| |
| atomic_set(&ibi->pending_ibis, 0); |
| init_completion(&ibi->all_ibis_handled); |
| ibi->handler = req->handler; |
| ibi->max_payload_len = req->max_payload_len; |
| ibi->num_slots = req->num_slots; |
| |
| dev->ibi = ibi; |
| ret = master->ops->request_ibi(dev, req); |
| if (ret) { |
| kfree(ibi); |
| dev->ibi = NULL; |
| } |
| |
| return ret; |
| } |
| |
| void i3c_dev_free_ibi_locked(struct i3c_dev_desc *dev) |
| { |
| struct i3c_master_controller *master = i3c_dev_get_master(dev); |
| |
| if (!dev->ibi) |
| return; |
| |
| if (WARN_ON(dev->ibi->enabled)) |
| WARN_ON(i3c_dev_disable_ibi_locked(dev)); |
| |
| master->ops->free_ibi(dev); |
| kfree(dev->ibi); |
| dev->ibi = NULL; |
| } |
| |
| static int __init i3c_init(void) |
| { |
| return bus_register(&i3c_bus_type); |
| } |
| subsys_initcall(i3c_init); |
| |
| static void __exit i3c_exit(void) |
| { |
| idr_destroy(&i3c_bus_idr); |
| bus_unregister(&i3c_bus_type); |
| } |
| module_exit(i3c_exit); |
| |
| MODULE_AUTHOR("Boris Brezillon <boris.brezillon@bootlin.com>"); |
| MODULE_DESCRIPTION("I3C core"); |
| MODULE_LICENSE("GPL v2"); |