| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (c) by Uros Bizjak <uros@kss-loka.si> |
| * |
| * Routines for OPL2/OPL3/OPL4 control |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/export.h> |
| #include <linux/nospec.h> |
| #include <sound/opl3.h> |
| #include <sound/asound_fm.h> |
| #include "opl3_voice.h" |
| |
| #if IS_ENABLED(CONFIG_SND_SEQUENCER) |
| #define OPL3_SUPPORT_SYNTH |
| #endif |
| |
| /* |
| * There is 18 possible 2 OP voices |
| * (9 in the left and 9 in the right). |
| * The first OP is the modulator and 2nd is the carrier. |
| * |
| * The first three voices in the both sides may be connected |
| * with another voice to a 4 OP voice. For example voice 0 |
| * can be connected with voice 3. The operators of voice 3 are |
| * used as operators 3 and 4 of the new 4 OP voice. |
| * In this case the 2 OP voice number 0 is the 'first half' and |
| * voice 3 is the second. |
| */ |
| |
| |
| /* |
| * Register offset table for OPL2/3 voices, |
| * OPL2 / one OPL3 register array side only |
| */ |
| |
| char snd_opl3_regmap[MAX_OPL2_VOICES][4] = |
| { |
| /* OP1 OP2 OP3 OP4 */ |
| /* ------------------------ */ |
| { 0x00, 0x03, 0x08, 0x0b }, |
| { 0x01, 0x04, 0x09, 0x0c }, |
| { 0x02, 0x05, 0x0a, 0x0d }, |
| |
| { 0x08, 0x0b, 0x00, 0x00 }, |
| { 0x09, 0x0c, 0x00, 0x00 }, |
| { 0x0a, 0x0d, 0x00, 0x00 }, |
| |
| { 0x10, 0x13, 0x00, 0x00 }, /* used by percussive voices */ |
| { 0x11, 0x14, 0x00, 0x00 }, /* if the percussive mode */ |
| { 0x12, 0x15, 0x00, 0x00 } /* is selected (only left reg block) */ |
| }; |
| |
| EXPORT_SYMBOL(snd_opl3_regmap); |
| |
| /* |
| * prototypes |
| */ |
| static int snd_opl3_play_note(struct snd_opl3 * opl3, struct snd_dm_fm_note * note); |
| static int snd_opl3_set_voice(struct snd_opl3 * opl3, struct snd_dm_fm_voice * voice); |
| static int snd_opl3_set_params(struct snd_opl3 * opl3, struct snd_dm_fm_params * params); |
| static int snd_opl3_set_mode(struct snd_opl3 * opl3, int mode); |
| static int snd_opl3_set_connection(struct snd_opl3 * opl3, int connection); |
| |
| /* ------------------------------ */ |
| |
| /* |
| * open the device exclusively |
| */ |
| int snd_opl3_open(struct snd_hwdep * hw, struct file *file) |
| { |
| return 0; |
| } |
| |
| /* |
| * ioctl for hwdep device: |
| */ |
| int snd_opl3_ioctl(struct snd_hwdep * hw, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| struct snd_opl3 *opl3 = hw->private_data; |
| void __user *argp = (void __user *)arg; |
| |
| if (snd_BUG_ON(!opl3)) |
| return -EINVAL; |
| |
| switch (cmd) { |
| /* get information */ |
| case SNDRV_DM_FM_IOCTL_INFO: |
| { |
| struct snd_dm_fm_info info; |
| |
| info.fm_mode = opl3->fm_mode; |
| info.rhythm = opl3->rhythm; |
| if (copy_to_user(argp, &info, sizeof(struct snd_dm_fm_info))) |
| return -EFAULT; |
| return 0; |
| } |
| |
| case SNDRV_DM_FM_IOCTL_RESET: |
| #ifdef CONFIG_SND_OSSEMUL |
| case SNDRV_DM_FM_OSS_IOCTL_RESET: |
| #endif |
| snd_opl3_reset(opl3); |
| return 0; |
| |
| case SNDRV_DM_FM_IOCTL_PLAY_NOTE: |
| #ifdef CONFIG_SND_OSSEMUL |
| case SNDRV_DM_FM_OSS_IOCTL_PLAY_NOTE: |
| #endif |
| { |
| struct snd_dm_fm_note note; |
| if (copy_from_user(¬e, argp, sizeof(struct snd_dm_fm_note))) |
| return -EFAULT; |
| return snd_opl3_play_note(opl3, ¬e); |
| } |
| |
| case SNDRV_DM_FM_IOCTL_SET_VOICE: |
| #ifdef CONFIG_SND_OSSEMUL |
| case SNDRV_DM_FM_OSS_IOCTL_SET_VOICE: |
| #endif |
| { |
| struct snd_dm_fm_voice voice; |
| if (copy_from_user(&voice, argp, sizeof(struct snd_dm_fm_voice))) |
| return -EFAULT; |
| return snd_opl3_set_voice(opl3, &voice); |
| } |
| |
| case SNDRV_DM_FM_IOCTL_SET_PARAMS: |
| #ifdef CONFIG_SND_OSSEMUL |
| case SNDRV_DM_FM_OSS_IOCTL_SET_PARAMS: |
| #endif |
| { |
| struct snd_dm_fm_params params; |
| if (copy_from_user(¶ms, argp, sizeof(struct snd_dm_fm_params))) |
| return -EFAULT; |
| return snd_opl3_set_params(opl3, ¶ms); |
| } |
| |
| case SNDRV_DM_FM_IOCTL_SET_MODE: |
| #ifdef CONFIG_SND_OSSEMUL |
| case SNDRV_DM_FM_OSS_IOCTL_SET_MODE: |
| #endif |
| return snd_opl3_set_mode(opl3, (int) arg); |
| |
| case SNDRV_DM_FM_IOCTL_SET_CONNECTION: |
| #ifdef CONFIG_SND_OSSEMUL |
| case SNDRV_DM_FM_OSS_IOCTL_SET_OPL: |
| #endif |
| return snd_opl3_set_connection(opl3, (int) arg); |
| |
| #ifdef OPL3_SUPPORT_SYNTH |
| case SNDRV_DM_FM_IOCTL_CLEAR_PATCHES: |
| snd_opl3_clear_patches(opl3); |
| return 0; |
| #endif |
| |
| #ifdef CONFIG_SND_DEBUG |
| default: |
| snd_printk(KERN_WARNING "unknown IOCTL: 0x%x\n", cmd); |
| #endif |
| } |
| return -ENOTTY; |
| } |
| |
| /* |
| * close the device |
| */ |
| int snd_opl3_release(struct snd_hwdep * hw, struct file *file) |
| { |
| struct snd_opl3 *opl3 = hw->private_data; |
| |
| snd_opl3_reset(opl3); |
| return 0; |
| } |
| |
| #ifdef OPL3_SUPPORT_SYNTH |
| /* |
| * write the device - load patches |
| */ |
| long snd_opl3_write(struct snd_hwdep *hw, const char __user *buf, long count, |
| loff_t *offset) |
| { |
| struct snd_opl3 *opl3 = hw->private_data; |
| long result = 0; |
| int err = 0; |
| struct sbi_patch inst; |
| |
| while (count >= sizeof(inst)) { |
| unsigned char type; |
| if (copy_from_user(&inst, buf, sizeof(inst))) |
| return -EFAULT; |
| if (!memcmp(inst.key, FM_KEY_SBI, 4) || |
| !memcmp(inst.key, FM_KEY_2OP, 4)) |
| type = FM_PATCH_OPL2; |
| else if (!memcmp(inst.key, FM_KEY_4OP, 4)) |
| type = FM_PATCH_OPL3; |
| else /* invalid type */ |
| break; |
| err = snd_opl3_load_patch(opl3, inst.prog, inst.bank, type, |
| inst.name, inst.extension, |
| inst.data); |
| if (err < 0) |
| break; |
| result += sizeof(inst); |
| count -= sizeof(inst); |
| } |
| return result > 0 ? result : err; |
| } |
| |
| |
| /* |
| * Patch management |
| */ |
| |
| /* offsets for SBI params */ |
| #define AM_VIB 0 |
| #define KSL_LEVEL 2 |
| #define ATTACK_DECAY 4 |
| #define SUSTAIN_RELEASE 6 |
| #define WAVE_SELECT 8 |
| |
| /* offset for SBI instrument */ |
| #define CONNECTION 10 |
| #define OFFSET_4OP 11 |
| |
| /* |
| * load a patch, obviously. |
| * |
| * loaded on the given program and bank numbers with the given type |
| * (FM_PATCH_OPLx). |
| * data is the pointer of SBI record _without_ header (key and name). |
| * name is the name string of the patch. |
| * ext is the extension data of 7 bytes long (stored in name of SBI |
| * data up to offset 25), or NULL to skip. |
| * return 0 if successful or a negative error code. |
| */ |
| int snd_opl3_load_patch(struct snd_opl3 *opl3, |
| int prog, int bank, int type, |
| const char *name, |
| const unsigned char *ext, |
| const unsigned char *data) |
| { |
| struct fm_patch *patch; |
| int i; |
| |
| patch = snd_opl3_find_patch(opl3, prog, bank, 1); |
| if (!patch) |
| return -ENOMEM; |
| |
| patch->type = type; |
| |
| for (i = 0; i < 2; i++) { |
| patch->inst.op[i].am_vib = data[AM_VIB + i]; |
| patch->inst.op[i].ksl_level = data[KSL_LEVEL + i]; |
| patch->inst.op[i].attack_decay = data[ATTACK_DECAY + i]; |
| patch->inst.op[i].sustain_release = data[SUSTAIN_RELEASE + i]; |
| patch->inst.op[i].wave_select = data[WAVE_SELECT + i]; |
| } |
| patch->inst.feedback_connection[0] = data[CONNECTION]; |
| |
| if (type == FM_PATCH_OPL3) { |
| for (i = 0; i < 2; i++) { |
| patch->inst.op[i+2].am_vib = |
| data[OFFSET_4OP + AM_VIB + i]; |
| patch->inst.op[i+2].ksl_level = |
| data[OFFSET_4OP + KSL_LEVEL + i]; |
| patch->inst.op[i+2].attack_decay = |
| data[OFFSET_4OP + ATTACK_DECAY + i]; |
| patch->inst.op[i+2].sustain_release = |
| data[OFFSET_4OP + SUSTAIN_RELEASE + i]; |
| patch->inst.op[i+2].wave_select = |
| data[OFFSET_4OP + WAVE_SELECT + i]; |
| } |
| patch->inst.feedback_connection[1] = |
| data[OFFSET_4OP + CONNECTION]; |
| } |
| |
| if (ext) { |
| patch->inst.echo_delay = ext[0]; |
| patch->inst.echo_atten = ext[1]; |
| patch->inst.chorus_spread = ext[2]; |
| patch->inst.trnsps = ext[3]; |
| patch->inst.fix_dur = ext[4]; |
| patch->inst.modes = ext[5]; |
| patch->inst.fix_key = ext[6]; |
| } |
| |
| if (name) |
| strlcpy(patch->name, name, sizeof(patch->name)); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(snd_opl3_load_patch); |
| |
| /* |
| * find a patch with the given program and bank numbers, returns its pointer |
| * if no matching patch is found and create_patch is set, it creates a |
| * new patch object. |
| */ |
| struct fm_patch *snd_opl3_find_patch(struct snd_opl3 *opl3, int prog, int bank, |
| int create_patch) |
| { |
| /* pretty dumb hash key */ |
| unsigned int key = (prog + bank) % OPL3_PATCH_HASH_SIZE; |
| struct fm_patch *patch; |
| |
| for (patch = opl3->patch_table[key]; patch; patch = patch->next) { |
| if (patch->prog == prog && patch->bank == bank) |
| return patch; |
| } |
| if (!create_patch) |
| return NULL; |
| |
| patch = kzalloc(sizeof(*patch), GFP_KERNEL); |
| if (!patch) |
| return NULL; |
| patch->prog = prog; |
| patch->bank = bank; |
| patch->next = opl3->patch_table[key]; |
| opl3->patch_table[key] = patch; |
| return patch; |
| } |
| EXPORT_SYMBOL(snd_opl3_find_patch); |
| |
| /* |
| * Clear all patches of the given OPL3 instance |
| */ |
| void snd_opl3_clear_patches(struct snd_opl3 *opl3) |
| { |
| int i; |
| for (i = 0; i < OPL3_PATCH_HASH_SIZE; i++) { |
| struct fm_patch *patch, *next; |
| for (patch = opl3->patch_table[i]; patch; patch = next) { |
| next = patch->next; |
| kfree(patch); |
| } |
| } |
| memset(opl3->patch_table, 0, sizeof(opl3->patch_table)); |
| } |
| #endif /* OPL3_SUPPORT_SYNTH */ |
| |
| /* ------------------------------ */ |
| |
| void snd_opl3_reset(struct snd_opl3 * opl3) |
| { |
| unsigned short opl3_reg; |
| |
| unsigned short reg_side; |
| unsigned char voice_offset; |
| |
| int max_voices, i; |
| |
| max_voices = (opl3->hardware < OPL3_HW_OPL3) ? |
| MAX_OPL2_VOICES : MAX_OPL3_VOICES; |
| |
| for (i = 0; i < max_voices; i++) { |
| /* Get register array side and offset of voice */ |
| if (i < MAX_OPL2_VOICES) { |
| /* Left register block for voices 0 .. 8 */ |
| reg_side = OPL3_LEFT; |
| voice_offset = i; |
| } else { |
| /* Right register block for voices 9 .. 17 */ |
| reg_side = OPL3_RIGHT; |
| voice_offset = i - MAX_OPL2_VOICES; |
| } |
| opl3_reg = reg_side | (OPL3_REG_KSL_LEVEL + snd_opl3_regmap[voice_offset][0]); |
| opl3->command(opl3, opl3_reg, OPL3_TOTAL_LEVEL_MASK); /* Operator 1 volume */ |
| opl3_reg = reg_side | (OPL3_REG_KSL_LEVEL + snd_opl3_regmap[voice_offset][1]); |
| opl3->command(opl3, opl3_reg, OPL3_TOTAL_LEVEL_MASK); /* Operator 2 volume */ |
| |
| opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK + voice_offset); |
| opl3->command(opl3, opl3_reg, 0x00); /* Note off */ |
| } |
| |
| opl3->max_voices = MAX_OPL2_VOICES; |
| opl3->fm_mode = SNDRV_DM_FM_MODE_OPL2; |
| |
| opl3->command(opl3, OPL3_LEFT | OPL3_REG_TEST, OPL3_ENABLE_WAVE_SELECT); |
| opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION, 0x00); /* Melodic mode */ |
| opl3->rhythm = 0; |
| } |
| |
| EXPORT_SYMBOL(snd_opl3_reset); |
| |
| static int snd_opl3_play_note(struct snd_opl3 * opl3, struct snd_dm_fm_note * note) |
| { |
| unsigned short reg_side; |
| unsigned char voice_offset; |
| |
| unsigned short opl3_reg; |
| unsigned char reg_val; |
| |
| /* Voices 0 - 8 in OPL2 mode */ |
| /* Voices 0 - 17 in OPL3 mode */ |
| if (note->voice >= ((opl3->fm_mode == SNDRV_DM_FM_MODE_OPL3) ? |
| MAX_OPL3_VOICES : MAX_OPL2_VOICES)) |
| return -EINVAL; |
| |
| /* Get register array side and offset of voice */ |
| if (note->voice < MAX_OPL2_VOICES) { |
| /* Left register block for voices 0 .. 8 */ |
| reg_side = OPL3_LEFT; |
| voice_offset = note->voice; |
| } else { |
| /* Right register block for voices 9 .. 17 */ |
| reg_side = OPL3_RIGHT; |
| voice_offset = note->voice - MAX_OPL2_VOICES; |
| } |
| |
| /* Set lower 8 bits of note frequency */ |
| reg_val = (unsigned char) note->fnum; |
| opl3_reg = reg_side | (OPL3_REG_FNUM_LOW + voice_offset); |
| opl3->command(opl3, opl3_reg, reg_val); |
| |
| reg_val = 0x00; |
| /* Set output sound flag */ |
| if (note->key_on) |
| reg_val |= OPL3_KEYON_BIT; |
| /* Set octave */ |
| reg_val |= (note->octave << 2) & OPL3_BLOCKNUM_MASK; |
| /* Set higher 2 bits of note frequency */ |
| reg_val |= (unsigned char) (note->fnum >> 8) & OPL3_FNUM_HIGH_MASK; |
| |
| /* Set OPL3 KEYON_BLOCK register of requested voice */ |
| opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK + voice_offset); |
| opl3->command(opl3, opl3_reg, reg_val); |
| |
| return 0; |
| } |
| |
| |
| static int snd_opl3_set_voice(struct snd_opl3 * opl3, struct snd_dm_fm_voice * voice) |
| { |
| unsigned short reg_side; |
| unsigned char op_offset; |
| unsigned char voice_offset, voice_op; |
| |
| unsigned short opl3_reg; |
| unsigned char reg_val; |
| |
| /* Only operators 1 and 2 */ |
| if (voice->op > 1) |
| return -EINVAL; |
| /* Voices 0 - 8 in OPL2 mode */ |
| /* Voices 0 - 17 in OPL3 mode */ |
| if (voice->voice >= ((opl3->fm_mode == SNDRV_DM_FM_MODE_OPL3) ? |
| MAX_OPL3_VOICES : MAX_OPL2_VOICES)) |
| return -EINVAL; |
| |
| /* Get register array side and offset of voice */ |
| if (voice->voice < MAX_OPL2_VOICES) { |
| /* Left register block for voices 0 .. 8 */ |
| reg_side = OPL3_LEFT; |
| voice_offset = voice->voice; |
| } else { |
| /* Right register block for voices 9 .. 17 */ |
| reg_side = OPL3_RIGHT; |
| voice_offset = voice->voice - MAX_OPL2_VOICES; |
| } |
| /* Get register offset of operator */ |
| voice_offset = array_index_nospec(voice_offset, MAX_OPL2_VOICES); |
| voice_op = array_index_nospec(voice->op, 4); |
| op_offset = snd_opl3_regmap[voice_offset][voice_op]; |
| |
| reg_val = 0x00; |
| /* Set amplitude modulation (tremolo) effect */ |
| if (voice->am) |
| reg_val |= OPL3_TREMOLO_ON; |
| /* Set vibrato effect */ |
| if (voice->vibrato) |
| reg_val |= OPL3_VIBRATO_ON; |
| /* Set sustaining sound phase */ |
| if (voice->do_sustain) |
| reg_val |= OPL3_SUSTAIN_ON; |
| /* Set keyboard scaling bit */ |
| if (voice->kbd_scale) |
| reg_val |= OPL3_KSR; |
| /* Set harmonic or frequency multiplier */ |
| reg_val |= voice->harmonic & OPL3_MULTIPLE_MASK; |
| |
| /* Set OPL3 AM_VIB register of requested voice/operator */ |
| opl3_reg = reg_side | (OPL3_REG_AM_VIB + op_offset); |
| opl3->command(opl3, opl3_reg, reg_val); |
| |
| /* Set decreasing volume of higher notes */ |
| reg_val = (voice->scale_level << 6) & OPL3_KSL_MASK; |
| /* Set output volume */ |
| reg_val |= ~voice->volume & OPL3_TOTAL_LEVEL_MASK; |
| |
| /* Set OPL3 KSL_LEVEL register of requested voice/operator */ |
| opl3_reg = reg_side | (OPL3_REG_KSL_LEVEL + op_offset); |
| opl3->command(opl3, opl3_reg, reg_val); |
| |
| /* Set attack phase level */ |
| reg_val = (voice->attack << 4) & OPL3_ATTACK_MASK; |
| /* Set decay phase level */ |
| reg_val |= voice->decay & OPL3_DECAY_MASK; |
| |
| /* Set OPL3 ATTACK_DECAY register of requested voice/operator */ |
| opl3_reg = reg_side | (OPL3_REG_ATTACK_DECAY + op_offset); |
| opl3->command(opl3, opl3_reg, reg_val); |
| |
| /* Set sustain phase level */ |
| reg_val = (voice->sustain << 4) & OPL3_SUSTAIN_MASK; |
| /* Set release phase level */ |
| reg_val |= voice->release & OPL3_RELEASE_MASK; |
| |
| /* Set OPL3 SUSTAIN_RELEASE register of requested voice/operator */ |
| opl3_reg = reg_side | (OPL3_REG_SUSTAIN_RELEASE + op_offset); |
| opl3->command(opl3, opl3_reg, reg_val); |
| |
| /* Set inter-operator feedback */ |
| reg_val = (voice->feedback << 1) & OPL3_FEEDBACK_MASK; |
| /* Set inter-operator connection */ |
| if (voice->connection) |
| reg_val |= OPL3_CONNECTION_BIT; |
| /* OPL-3 only */ |
| if (opl3->fm_mode == SNDRV_DM_FM_MODE_OPL3) { |
| if (voice->left) |
| reg_val |= OPL3_VOICE_TO_LEFT; |
| if (voice->right) |
| reg_val |= OPL3_VOICE_TO_RIGHT; |
| } |
| /* Feedback/connection bits are applicable to voice */ |
| opl3_reg = reg_side | (OPL3_REG_FEEDBACK_CONNECTION + voice_offset); |
| opl3->command(opl3, opl3_reg, reg_val); |
| |
| /* Select waveform */ |
| reg_val = voice->waveform & OPL3_WAVE_SELECT_MASK; |
| opl3_reg = reg_side | (OPL3_REG_WAVE_SELECT + op_offset); |
| opl3->command(opl3, opl3_reg, reg_val); |
| |
| return 0; |
| } |
| |
| static int snd_opl3_set_params(struct snd_opl3 * opl3, struct snd_dm_fm_params * params) |
| { |
| unsigned char reg_val; |
| |
| reg_val = 0x00; |
| /* Set keyboard split method */ |
| if (params->kbd_split) |
| reg_val |= OPL3_KEYBOARD_SPLIT; |
| opl3->command(opl3, OPL3_LEFT | OPL3_REG_KBD_SPLIT, reg_val); |
| |
| reg_val = 0x00; |
| /* Set amplitude modulation (tremolo) depth */ |
| if (params->am_depth) |
| reg_val |= OPL3_TREMOLO_DEPTH; |
| /* Set vibrato depth */ |
| if (params->vib_depth) |
| reg_val |= OPL3_VIBRATO_DEPTH; |
| /* Set percussion mode */ |
| if (params->rhythm) { |
| reg_val |= OPL3_PERCUSSION_ENABLE; |
| opl3->rhythm = 1; |
| } else { |
| opl3->rhythm = 0; |
| } |
| /* Play percussion instruments */ |
| if (params->bass) |
| reg_val |= OPL3_BASSDRUM_ON; |
| if (params->snare) |
| reg_val |= OPL3_SNAREDRUM_ON; |
| if (params->tomtom) |
| reg_val |= OPL3_TOMTOM_ON; |
| if (params->cymbal) |
| reg_val |= OPL3_CYMBAL_ON; |
| if (params->hihat) |
| reg_val |= OPL3_HIHAT_ON; |
| |
| opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION, reg_val); |
| return 0; |
| } |
| |
| static int snd_opl3_set_mode(struct snd_opl3 * opl3, int mode) |
| { |
| if ((mode == SNDRV_DM_FM_MODE_OPL3) && (opl3->hardware < OPL3_HW_OPL3)) |
| return -EINVAL; |
| |
| opl3->fm_mode = mode; |
| if (opl3->hardware >= OPL3_HW_OPL3) |
| opl3->command(opl3, OPL3_RIGHT | OPL3_REG_CONNECTION_SELECT, 0x00); /* Clear 4-op connections */ |
| |
| return 0; |
| } |
| |
| static int snd_opl3_set_connection(struct snd_opl3 * opl3, int connection) |
| { |
| unsigned char reg_val; |
| |
| /* OPL-3 only */ |
| if (opl3->fm_mode != SNDRV_DM_FM_MODE_OPL3) |
| return -EINVAL; |
| |
| reg_val = connection & (OPL3_RIGHT_4OP_0 | OPL3_RIGHT_4OP_1 | OPL3_RIGHT_4OP_2 | |
| OPL3_LEFT_4OP_0 | OPL3_LEFT_4OP_1 | OPL3_LEFT_4OP_2); |
| /* Set 4-op connections */ |
| opl3->command(opl3, OPL3_RIGHT | OPL3_REG_CONNECTION_SELECT, reg_val); |
| |
| return 0; |
| } |
| |