| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Handling of a master device, switching frames via its switch fabric CPU port |
| * |
| * Copyright (c) 2017 Savoir-faire Linux Inc. |
| * Vivien Didelot <vivien.didelot@savoirfairelinux.com> |
| */ |
| |
| #include <linux/ethtool.h> |
| #include <linux/netdevice.h> |
| #include <linux/netlink.h> |
| #include <net/dsa.h> |
| |
| #include "dsa.h" |
| #include "master.h" |
| #include "port.h" |
| #include "tag.h" |
| |
| static int dsa_master_get_regs_len(struct net_device *dev) |
| { |
| struct dsa_port *cpu_dp = dev->dsa_ptr; |
| const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops; |
| struct dsa_switch *ds = cpu_dp->ds; |
| int port = cpu_dp->index; |
| int ret = 0; |
| int len; |
| |
| if (ops->get_regs_len) { |
| len = ops->get_regs_len(dev); |
| if (len < 0) |
| return len; |
| ret += len; |
| } |
| |
| ret += sizeof(struct ethtool_drvinfo); |
| ret += sizeof(struct ethtool_regs); |
| |
| if (ds->ops->get_regs_len) { |
| len = ds->ops->get_regs_len(ds, port); |
| if (len < 0) |
| return len; |
| ret += len; |
| } |
| |
| return ret; |
| } |
| |
| static void dsa_master_get_regs(struct net_device *dev, |
| struct ethtool_regs *regs, void *data) |
| { |
| struct dsa_port *cpu_dp = dev->dsa_ptr; |
| const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops; |
| struct dsa_switch *ds = cpu_dp->ds; |
| struct ethtool_drvinfo *cpu_info; |
| struct ethtool_regs *cpu_regs; |
| int port = cpu_dp->index; |
| int len; |
| |
| if (ops->get_regs_len && ops->get_regs) { |
| len = ops->get_regs_len(dev); |
| if (len < 0) |
| return; |
| regs->len = len; |
| ops->get_regs(dev, regs, data); |
| data += regs->len; |
| } |
| |
| cpu_info = (struct ethtool_drvinfo *)data; |
| strscpy(cpu_info->driver, "dsa", sizeof(cpu_info->driver)); |
| data += sizeof(*cpu_info); |
| cpu_regs = (struct ethtool_regs *)data; |
| data += sizeof(*cpu_regs); |
| |
| if (ds->ops->get_regs_len && ds->ops->get_regs) { |
| len = ds->ops->get_regs_len(ds, port); |
| if (len < 0) |
| return; |
| cpu_regs->len = len; |
| ds->ops->get_regs(ds, port, cpu_regs, data); |
| } |
| } |
| |
| static void dsa_master_get_ethtool_stats(struct net_device *dev, |
| struct ethtool_stats *stats, |
| uint64_t *data) |
| { |
| struct dsa_port *cpu_dp = dev->dsa_ptr; |
| const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops; |
| struct dsa_switch *ds = cpu_dp->ds; |
| int port = cpu_dp->index; |
| int count = 0; |
| |
| if (ops->get_sset_count && ops->get_ethtool_stats) { |
| count = ops->get_sset_count(dev, ETH_SS_STATS); |
| ops->get_ethtool_stats(dev, stats, data); |
| } |
| |
| if (ds->ops->get_ethtool_stats) |
| ds->ops->get_ethtool_stats(ds, port, data + count); |
| } |
| |
| static void dsa_master_get_ethtool_phy_stats(struct net_device *dev, |
| struct ethtool_stats *stats, |
| uint64_t *data) |
| { |
| struct dsa_port *cpu_dp = dev->dsa_ptr; |
| const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops; |
| struct dsa_switch *ds = cpu_dp->ds; |
| int port = cpu_dp->index; |
| int count = 0; |
| |
| if (dev->phydev && !ops->get_ethtool_phy_stats) { |
| count = phy_ethtool_get_sset_count(dev->phydev); |
| if (count >= 0) |
| phy_ethtool_get_stats(dev->phydev, stats, data); |
| } else if (ops->get_sset_count && ops->get_ethtool_phy_stats) { |
| count = ops->get_sset_count(dev, ETH_SS_PHY_STATS); |
| ops->get_ethtool_phy_stats(dev, stats, data); |
| } |
| |
| if (count < 0) |
| count = 0; |
| |
| if (ds->ops->get_ethtool_phy_stats) |
| ds->ops->get_ethtool_phy_stats(ds, port, data + count); |
| } |
| |
| static int dsa_master_get_sset_count(struct net_device *dev, int sset) |
| { |
| struct dsa_port *cpu_dp = dev->dsa_ptr; |
| const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops; |
| struct dsa_switch *ds = cpu_dp->ds; |
| int count = 0; |
| |
| if (sset == ETH_SS_PHY_STATS && dev->phydev && |
| !ops->get_ethtool_phy_stats) |
| count = phy_ethtool_get_sset_count(dev->phydev); |
| else if (ops->get_sset_count) |
| count = ops->get_sset_count(dev, sset); |
| |
| if (count < 0) |
| count = 0; |
| |
| if (ds->ops->get_sset_count) |
| count += ds->ops->get_sset_count(ds, cpu_dp->index, sset); |
| |
| return count; |
| } |
| |
| static void dsa_master_get_strings(struct net_device *dev, uint32_t stringset, |
| uint8_t *data) |
| { |
| struct dsa_port *cpu_dp = dev->dsa_ptr; |
| const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops; |
| struct dsa_switch *ds = cpu_dp->ds; |
| int port = cpu_dp->index; |
| int len = ETH_GSTRING_LEN; |
| int mcount = 0, count, i; |
| uint8_t pfx[4]; |
| uint8_t *ndata; |
| |
| snprintf(pfx, sizeof(pfx), "p%.2d", port); |
| /* We do not want to be NULL-terminated, since this is a prefix */ |
| pfx[sizeof(pfx) - 1] = '_'; |
| |
| if (stringset == ETH_SS_PHY_STATS && dev->phydev && |
| !ops->get_ethtool_phy_stats) { |
| mcount = phy_ethtool_get_sset_count(dev->phydev); |
| if (mcount < 0) |
| mcount = 0; |
| else |
| phy_ethtool_get_strings(dev->phydev, data); |
| } else if (ops->get_sset_count && ops->get_strings) { |
| mcount = ops->get_sset_count(dev, stringset); |
| if (mcount < 0) |
| mcount = 0; |
| ops->get_strings(dev, stringset, data); |
| } |
| |
| if (ds->ops->get_strings) { |
| ndata = data + mcount * len; |
| /* This function copies ETH_GSTRINGS_LEN bytes, we will mangle |
| * the output after to prepend our CPU port prefix we |
| * constructed earlier |
| */ |
| ds->ops->get_strings(ds, port, stringset, ndata); |
| count = ds->ops->get_sset_count(ds, port, stringset); |
| if (count < 0) |
| return; |
| for (i = 0; i < count; i++) { |
| memmove(ndata + (i * len + sizeof(pfx)), |
| ndata + i * len, len - sizeof(pfx)); |
| memcpy(ndata + i * len, pfx, sizeof(pfx)); |
| } |
| } |
| } |
| |
| static int dsa_master_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) |
| { |
| struct dsa_port *cpu_dp = dev->dsa_ptr; |
| struct dsa_switch *ds = cpu_dp->ds; |
| struct dsa_switch_tree *dst; |
| int err = -EOPNOTSUPP; |
| struct dsa_port *dp; |
| |
| dst = ds->dst; |
| |
| switch (cmd) { |
| case SIOCGHWTSTAMP: |
| case SIOCSHWTSTAMP: |
| /* Deny PTP operations on master if there is at least one |
| * switch in the tree that is PTP capable. |
| */ |
| list_for_each_entry(dp, &dst->ports, list) |
| if (dsa_port_supports_hwtstamp(dp, ifr)) |
| return -EBUSY; |
| break; |
| } |
| |
| if (dev->netdev_ops->ndo_eth_ioctl) |
| err = dev->netdev_ops->ndo_eth_ioctl(dev, ifr, cmd); |
| |
| return err; |
| } |
| |
| static const struct dsa_netdevice_ops dsa_netdev_ops = { |
| .ndo_eth_ioctl = dsa_master_ioctl, |
| }; |
| |
| static int dsa_master_ethtool_setup(struct net_device *dev) |
| { |
| struct dsa_port *cpu_dp = dev->dsa_ptr; |
| struct dsa_switch *ds = cpu_dp->ds; |
| struct ethtool_ops *ops; |
| |
| if (netif_is_lag_master(dev)) |
| return 0; |
| |
| ops = devm_kzalloc(ds->dev, sizeof(*ops), GFP_KERNEL); |
| if (!ops) |
| return -ENOMEM; |
| |
| cpu_dp->orig_ethtool_ops = dev->ethtool_ops; |
| if (cpu_dp->orig_ethtool_ops) |
| memcpy(ops, cpu_dp->orig_ethtool_ops, sizeof(*ops)); |
| |
| ops->get_regs_len = dsa_master_get_regs_len; |
| ops->get_regs = dsa_master_get_regs; |
| ops->get_sset_count = dsa_master_get_sset_count; |
| ops->get_ethtool_stats = dsa_master_get_ethtool_stats; |
| ops->get_strings = dsa_master_get_strings; |
| ops->get_ethtool_phy_stats = dsa_master_get_ethtool_phy_stats; |
| |
| dev->ethtool_ops = ops; |
| |
| return 0; |
| } |
| |
| static void dsa_master_ethtool_teardown(struct net_device *dev) |
| { |
| struct dsa_port *cpu_dp = dev->dsa_ptr; |
| |
| if (netif_is_lag_master(dev)) |
| return; |
| |
| dev->ethtool_ops = cpu_dp->orig_ethtool_ops; |
| cpu_dp->orig_ethtool_ops = NULL; |
| } |
| |
| static void dsa_netdev_ops_set(struct net_device *dev, |
| const struct dsa_netdevice_ops *ops) |
| { |
| if (netif_is_lag_master(dev)) |
| return; |
| |
| dev->dsa_ptr->netdev_ops = ops; |
| } |
| |
| /* Keep the master always promiscuous if the tagging protocol requires that |
| * (garbles MAC DA) or if it doesn't support unicast filtering, case in which |
| * it would revert to promiscuous mode as soon as we call dev_uc_add() on it |
| * anyway. |
| */ |
| static void dsa_master_set_promiscuity(struct net_device *dev, int inc) |
| { |
| const struct dsa_device_ops *ops = dev->dsa_ptr->tag_ops; |
| |
| if ((dev->priv_flags & IFF_UNICAST_FLT) && !ops->promisc_on_master) |
| return; |
| |
| ASSERT_RTNL(); |
| |
| dev_set_promiscuity(dev, inc); |
| } |
| |
| static ssize_t tagging_show(struct device *d, struct device_attribute *attr, |
| char *buf) |
| { |
| struct net_device *dev = to_net_dev(d); |
| struct dsa_port *cpu_dp = dev->dsa_ptr; |
| |
| return sprintf(buf, "%s\n", |
| dsa_tag_protocol_to_str(cpu_dp->tag_ops)); |
| } |
| |
| static ssize_t tagging_store(struct device *d, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| const struct dsa_device_ops *new_tag_ops, *old_tag_ops; |
| const char *end = strchrnul(buf, '\n'), *name; |
| struct net_device *dev = to_net_dev(d); |
| struct dsa_port *cpu_dp = dev->dsa_ptr; |
| size_t len = end - buf; |
| int err; |
| |
| /* Empty string passed */ |
| if (!len) |
| return -ENOPROTOOPT; |
| |
| name = kstrndup(buf, len, GFP_KERNEL); |
| if (!name) |
| return -ENOMEM; |
| |
| old_tag_ops = cpu_dp->tag_ops; |
| new_tag_ops = dsa_tag_driver_get_by_name(name); |
| kfree(name); |
| /* Bad tagger name? */ |
| if (IS_ERR(new_tag_ops)) |
| return PTR_ERR(new_tag_ops); |
| |
| if (new_tag_ops == old_tag_ops) |
| /* Drop the temporarily held duplicate reference, since |
| * the DSA switch tree uses this tagger. |
| */ |
| goto out; |
| |
| err = dsa_tree_change_tag_proto(cpu_dp->ds->dst, new_tag_ops, |
| old_tag_ops); |
| if (err) { |
| /* On failure the old tagger is restored, so we don't need the |
| * driver for the new one. |
| */ |
| dsa_tag_driver_put(new_tag_ops); |
| return err; |
| } |
| |
| /* On success we no longer need the module for the old tagging protocol |
| */ |
| out: |
| dsa_tag_driver_put(old_tag_ops); |
| return count; |
| } |
| static DEVICE_ATTR_RW(tagging); |
| |
| static struct attribute *dsa_slave_attrs[] = { |
| &dev_attr_tagging.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group dsa_group = { |
| .name = "dsa", |
| .attrs = dsa_slave_attrs, |
| }; |
| |
| static void dsa_master_reset_mtu(struct net_device *dev) |
| { |
| int err; |
| |
| err = dev_set_mtu(dev, ETH_DATA_LEN); |
| if (err) |
| netdev_dbg(dev, |
| "Unable to reset MTU to exclude DSA overheads\n"); |
| } |
| |
| int dsa_master_setup(struct net_device *dev, struct dsa_port *cpu_dp) |
| { |
| const struct dsa_device_ops *tag_ops = cpu_dp->tag_ops; |
| struct dsa_switch *ds = cpu_dp->ds; |
| struct device_link *consumer_link; |
| int mtu, ret; |
| |
| mtu = ETH_DATA_LEN + dsa_tag_protocol_overhead(tag_ops); |
| |
| /* The DSA master must use SET_NETDEV_DEV for this to work. */ |
| if (!netif_is_lag_master(dev)) { |
| consumer_link = device_link_add(ds->dev, dev->dev.parent, |
| DL_FLAG_AUTOREMOVE_CONSUMER); |
| if (!consumer_link) |
| netdev_err(dev, |
| "Failed to create a device link to DSA switch %s\n", |
| dev_name(ds->dev)); |
| } |
| |
| /* The switch driver may not implement ->port_change_mtu(), case in |
| * which dsa_slave_change_mtu() will not update the master MTU either, |
| * so we need to do that here. |
| */ |
| ret = dev_set_mtu(dev, mtu); |
| if (ret) |
| netdev_warn(dev, "error %d setting MTU to %d to include DSA overhead\n", |
| ret, mtu); |
| |
| /* If we use a tagging format that doesn't have an ethertype |
| * field, make sure that all packets from this point on get |
| * sent to the tag format's receive function. |
| */ |
| wmb(); |
| |
| dev->dsa_ptr = cpu_dp; |
| |
| dsa_master_set_promiscuity(dev, 1); |
| |
| ret = dsa_master_ethtool_setup(dev); |
| if (ret) |
| goto out_err_reset_promisc; |
| |
| dsa_netdev_ops_set(dev, &dsa_netdev_ops); |
| |
| ret = sysfs_create_group(&dev->dev.kobj, &dsa_group); |
| if (ret) |
| goto out_err_ndo_teardown; |
| |
| return ret; |
| |
| out_err_ndo_teardown: |
| dsa_netdev_ops_set(dev, NULL); |
| dsa_master_ethtool_teardown(dev); |
| out_err_reset_promisc: |
| dsa_master_set_promiscuity(dev, -1); |
| return ret; |
| } |
| |
| void dsa_master_teardown(struct net_device *dev) |
| { |
| sysfs_remove_group(&dev->dev.kobj, &dsa_group); |
| dsa_netdev_ops_set(dev, NULL); |
| dsa_master_ethtool_teardown(dev); |
| dsa_master_reset_mtu(dev); |
| dsa_master_set_promiscuity(dev, -1); |
| |
| dev->dsa_ptr = NULL; |
| |
| /* If we used a tagging format that doesn't have an ethertype |
| * field, make sure that all packets from this point get sent |
| * without the tag and go through the regular receive path. |
| */ |
| wmb(); |
| } |
| |
| int dsa_master_lag_setup(struct net_device *lag_dev, struct dsa_port *cpu_dp, |
| struct netdev_lag_upper_info *uinfo, |
| struct netlink_ext_ack *extack) |
| { |
| bool master_setup = false; |
| int err; |
| |
| if (!netdev_uses_dsa(lag_dev)) { |
| err = dsa_master_setup(lag_dev, cpu_dp); |
| if (err) |
| return err; |
| |
| master_setup = true; |
| } |
| |
| err = dsa_port_lag_join(cpu_dp, lag_dev, uinfo, extack); |
| if (err) { |
| if (extack && !extack->_msg) |
| NL_SET_ERR_MSG_MOD(extack, |
| "CPU port failed to join LAG"); |
| goto out_master_teardown; |
| } |
| |
| return 0; |
| |
| out_master_teardown: |
| if (master_setup) |
| dsa_master_teardown(lag_dev); |
| return err; |
| } |
| |
| /* Tear down a master if there isn't any other user port on it, |
| * optionally also destroying LAG information. |
| */ |
| void dsa_master_lag_teardown(struct net_device *lag_dev, |
| struct dsa_port *cpu_dp) |
| { |
| struct net_device *upper; |
| struct list_head *iter; |
| |
| dsa_port_lag_leave(cpu_dp, lag_dev); |
| |
| netdev_for_each_upper_dev_rcu(lag_dev, upper, iter) |
| if (dsa_slave_dev_check(upper)) |
| return; |
| |
| dsa_master_teardown(lag_dev); |
| } |