| // SPDX-License-Identifier: GPL-2.0 |
| |
| /* |
| * Atari Falcon PATA controller driver |
| * |
| * Copyright (c) 2016 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * Based on falconide.c: |
| * |
| * Created 12 Jul 1997 by Geert Uytterhoeven |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/blkdev.h> |
| #include <linux/delay.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <linux/ata.h> |
| #include <linux/libata.h> |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/setup.h> |
| #include <asm/atarihw.h> |
| #include <asm/atariints.h> |
| #include <asm/atari_stdma.h> |
| #include <asm/ide.h> |
| |
| #define DRV_NAME "pata_falcon" |
| #define DRV_VERSION "0.1.0" |
| |
| static struct scsi_host_template pata_falcon_sht = { |
| ATA_PIO_SHT(DRV_NAME), |
| }; |
| |
| static unsigned int pata_falcon_data_xfer(struct ata_queued_cmd *qc, |
| unsigned char *buf, |
| unsigned int buflen, int rw) |
| { |
| struct ata_device *dev = qc->dev; |
| struct ata_port *ap = dev->link->ap; |
| void __iomem *data_addr = ap->ioaddr.data_addr; |
| unsigned int words = buflen >> 1; |
| struct scsi_cmnd *cmd = qc->scsicmd; |
| bool swap = 1; |
| |
| if (dev->class == ATA_DEV_ATA && cmd && |
| !blk_rq_is_passthrough(scsi_cmd_to_rq(cmd))) |
| swap = 0; |
| |
| /* Transfer multiple of 2 bytes */ |
| if (rw == READ) { |
| if (swap) |
| raw_insw_swapw((u16 *)data_addr, (u16 *)buf, words); |
| else |
| raw_insw((u16 *)data_addr, (u16 *)buf, words); |
| } else { |
| if (swap) |
| raw_outsw_swapw((u16 *)data_addr, (u16 *)buf, words); |
| else |
| raw_outsw((u16 *)data_addr, (u16 *)buf, words); |
| } |
| |
| /* Transfer trailing byte, if any. */ |
| if (unlikely(buflen & 0x01)) { |
| unsigned char pad[2] = { }; |
| |
| /* Point buf to the tail of buffer */ |
| buf += buflen - 1; |
| |
| if (rw == READ) { |
| if (swap) |
| raw_insw_swapw((u16 *)data_addr, (u16 *)pad, 1); |
| else |
| raw_insw((u16 *)data_addr, (u16 *)pad, 1); |
| *buf = pad[0]; |
| } else { |
| pad[0] = *buf; |
| if (swap) |
| raw_outsw_swapw((u16 *)data_addr, (u16 *)pad, 1); |
| else |
| raw_outsw((u16 *)data_addr, (u16 *)pad, 1); |
| } |
| words++; |
| } |
| |
| return words << 1; |
| } |
| |
| /* |
| * Provide our own set_mode() as we don't want to change anything that has |
| * already been configured.. |
| */ |
| static int pata_falcon_set_mode(struct ata_link *link, |
| struct ata_device **unused) |
| { |
| struct ata_device *dev; |
| |
| ata_for_each_dev(dev, link, ENABLED) { |
| /* We don't really care */ |
| dev->pio_mode = dev->xfer_mode = XFER_PIO_0; |
| dev->xfer_shift = ATA_SHIFT_PIO; |
| dev->flags |= ATA_DFLAG_PIO; |
| ata_dev_info(dev, "configured for PIO\n"); |
| } |
| return 0; |
| } |
| |
| static struct ata_port_operations pata_falcon_ops = { |
| .inherits = &ata_sff_port_ops, |
| .sff_data_xfer = pata_falcon_data_xfer, |
| .cable_detect = ata_cable_unknown, |
| .set_mode = pata_falcon_set_mode, |
| }; |
| |
| static int __init pata_falcon_init_one(struct platform_device *pdev) |
| { |
| struct resource *base_mem_res, *ctl_mem_res; |
| struct resource *base_res, *ctl_res, *irq_res; |
| struct ata_host *host; |
| struct ata_port *ap; |
| void __iomem *base; |
| int irq = 0; |
| |
| dev_info(&pdev->dev, "Atari Falcon and Q40/Q60 PATA controller\n"); |
| |
| base_res = platform_get_resource(pdev, IORESOURCE_IO, 0); |
| if (base_res && !devm_request_region(&pdev->dev, base_res->start, |
| resource_size(base_res), DRV_NAME)) { |
| dev_err(&pdev->dev, "resources busy\n"); |
| return -EBUSY; |
| } |
| |
| ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 1); |
| if (ctl_res && !devm_request_region(&pdev->dev, ctl_res->start, |
| resource_size(ctl_res), DRV_NAME)) { |
| dev_err(&pdev->dev, "resources busy\n"); |
| return -EBUSY; |
| } |
| |
| base_mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!base_mem_res) |
| return -ENODEV; |
| if (!devm_request_mem_region(&pdev->dev, base_mem_res->start, |
| resource_size(base_mem_res), DRV_NAME)) { |
| dev_err(&pdev->dev, "resources busy\n"); |
| return -EBUSY; |
| } |
| |
| ctl_mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (!ctl_mem_res) |
| return -ENODEV; |
| |
| /* allocate host */ |
| host = ata_host_alloc(&pdev->dev, 1); |
| if (!host) |
| return -ENOMEM; |
| ap = host->ports[0]; |
| |
| ap->ops = &pata_falcon_ops; |
| ap->pio_mask = ATA_PIO4; |
| ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY; |
| |
| base = (void __iomem *)base_mem_res->start; |
| /* N.B. this assumes data_addr will be used for word-sized I/O only */ |
| ap->ioaddr.data_addr = base + 0 + 0 * 4; |
| ap->ioaddr.error_addr = base + 1 + 1 * 4; |
| ap->ioaddr.feature_addr = base + 1 + 1 * 4; |
| ap->ioaddr.nsect_addr = base + 1 + 2 * 4; |
| ap->ioaddr.lbal_addr = base + 1 + 3 * 4; |
| ap->ioaddr.lbam_addr = base + 1 + 4 * 4; |
| ap->ioaddr.lbah_addr = base + 1 + 5 * 4; |
| ap->ioaddr.device_addr = base + 1 + 6 * 4; |
| ap->ioaddr.status_addr = base + 1 + 7 * 4; |
| ap->ioaddr.command_addr = base + 1 + 7 * 4; |
| |
| base = (void __iomem *)ctl_mem_res->start; |
| ap->ioaddr.altstatus_addr = base + 1; |
| ap->ioaddr.ctl_addr = base + 1; |
| |
| ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", |
| (unsigned long)base_mem_res->start, |
| (unsigned long)ctl_mem_res->start); |
| |
| irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (irq_res && irq_res->start > 0) { |
| irq = irq_res->start; |
| } else { |
| ap->flags |= ATA_FLAG_PIO_POLLING; |
| ata_port_desc(ap, "no IRQ, using PIO polling"); |
| } |
| |
| /* activate */ |
| return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL, |
| IRQF_SHARED, &pata_falcon_sht); |
| } |
| |
| static int __exit pata_falcon_remove_one(struct platform_device *pdev) |
| { |
| struct ata_host *host = platform_get_drvdata(pdev); |
| |
| ata_host_detach(host); |
| |
| return 0; |
| } |
| |
| static struct platform_driver pata_falcon_driver = { |
| .remove = __exit_p(pata_falcon_remove_one), |
| .driver = { |
| .name = "atari-falcon-ide", |
| }, |
| }; |
| |
| module_platform_driver_probe(pata_falcon_driver, pata_falcon_init_one); |
| |
| MODULE_AUTHOR("Bartlomiej Zolnierkiewicz"); |
| MODULE_DESCRIPTION("low-level driver for Atari Falcon PATA"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:atari-falcon-ide"); |
| MODULE_VERSION(DRV_VERSION); |