| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * GPIO support for Cirrus Logic Madera codecs |
| * |
| * Copyright (C) 2015-2018 Cirrus Logic |
| */ |
| |
| #include <linux/gpio/driver.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| |
| #include <linux/mfd/madera/core.h> |
| #include <linux/mfd/madera/pdata.h> |
| #include <linux/mfd/madera/registers.h> |
| |
| struct madera_gpio { |
| struct madera *madera; |
| /* storage space for the gpio_chip we're using */ |
| struct gpio_chip gpio_chip; |
| }; |
| |
| static int madera_gpio_get_direction(struct gpio_chip *chip, |
| unsigned int offset) |
| { |
| struct madera_gpio *madera_gpio = gpiochip_get_data(chip); |
| struct madera *madera = madera_gpio->madera; |
| unsigned int reg_offset = 2 * offset; |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(madera->regmap, MADERA_GPIO1_CTRL_2 + reg_offset, |
| &val); |
| if (ret < 0) |
| return ret; |
| |
| if (val & MADERA_GP1_DIR_MASK) |
| return GPIO_LINE_DIRECTION_IN; |
| |
| return GPIO_LINE_DIRECTION_OUT; |
| } |
| |
| static int madera_gpio_direction_in(struct gpio_chip *chip, unsigned int offset) |
| { |
| struct madera_gpio *madera_gpio = gpiochip_get_data(chip); |
| struct madera *madera = madera_gpio->madera; |
| unsigned int reg_offset = 2 * offset; |
| |
| return regmap_update_bits(madera->regmap, |
| MADERA_GPIO1_CTRL_2 + reg_offset, |
| MADERA_GP1_DIR_MASK, MADERA_GP1_DIR); |
| } |
| |
| static int madera_gpio_get(struct gpio_chip *chip, unsigned int offset) |
| { |
| struct madera_gpio *madera_gpio = gpiochip_get_data(chip); |
| struct madera *madera = madera_gpio->madera; |
| unsigned int reg_offset = 2 * offset; |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(madera->regmap, MADERA_GPIO1_CTRL_1 + reg_offset, |
| &val); |
| if (ret < 0) |
| return ret; |
| |
| return !!(val & MADERA_GP1_LVL_MASK); |
| } |
| |
| static int madera_gpio_direction_out(struct gpio_chip *chip, |
| unsigned int offset, int value) |
| { |
| struct madera_gpio *madera_gpio = gpiochip_get_data(chip); |
| struct madera *madera = madera_gpio->madera; |
| unsigned int reg_offset = 2 * offset; |
| unsigned int reg_val = value ? MADERA_GP1_LVL : 0; |
| int ret; |
| |
| ret = regmap_update_bits(madera->regmap, |
| MADERA_GPIO1_CTRL_2 + reg_offset, |
| MADERA_GP1_DIR_MASK, 0); |
| if (ret < 0) |
| return ret; |
| |
| return regmap_update_bits(madera->regmap, |
| MADERA_GPIO1_CTRL_1 + reg_offset, |
| MADERA_GP1_LVL_MASK, reg_val); |
| } |
| |
| static void madera_gpio_set(struct gpio_chip *chip, unsigned int offset, |
| int value) |
| { |
| struct madera_gpio *madera_gpio = gpiochip_get_data(chip); |
| struct madera *madera = madera_gpio->madera; |
| unsigned int reg_offset = 2 * offset; |
| unsigned int reg_val = value ? MADERA_GP1_LVL : 0; |
| int ret; |
| |
| ret = regmap_update_bits(madera->regmap, |
| MADERA_GPIO1_CTRL_1 + reg_offset, |
| MADERA_GP1_LVL_MASK, reg_val); |
| |
| /* set() doesn't return an error so log a warning */ |
| if (ret) |
| dev_warn(madera->dev, "Failed to write to 0x%x (%d)\n", |
| MADERA_GPIO1_CTRL_1 + reg_offset, ret); |
| } |
| |
| static const struct gpio_chip madera_gpio_chip = { |
| .label = "madera", |
| .owner = THIS_MODULE, |
| .request = gpiochip_generic_request, |
| .free = gpiochip_generic_free, |
| .get_direction = madera_gpio_get_direction, |
| .direction_input = madera_gpio_direction_in, |
| .get = madera_gpio_get, |
| .direction_output = madera_gpio_direction_out, |
| .set = madera_gpio_set, |
| .set_config = gpiochip_generic_config, |
| .can_sleep = true, |
| }; |
| |
| static int madera_gpio_probe(struct platform_device *pdev) |
| { |
| struct madera *madera = dev_get_drvdata(pdev->dev.parent); |
| struct madera_pdata *pdata = &madera->pdata; |
| struct madera_gpio *madera_gpio; |
| int ret; |
| |
| madera_gpio = devm_kzalloc(&pdev->dev, sizeof(*madera_gpio), |
| GFP_KERNEL); |
| if (!madera_gpio) |
| return -ENOMEM; |
| |
| madera_gpio->madera = madera; |
| |
| /* Construct suitable gpio_chip from the template in madera_gpio_chip */ |
| madera_gpio->gpio_chip = madera_gpio_chip; |
| madera_gpio->gpio_chip.parent = pdev->dev.parent; |
| |
| switch (madera->type) { |
| case CS47L15: |
| madera_gpio->gpio_chip.ngpio = CS47L15_NUM_GPIOS; |
| break; |
| case CS47L35: |
| madera_gpio->gpio_chip.ngpio = CS47L35_NUM_GPIOS; |
| break; |
| case CS47L85: |
| case WM1840: |
| madera_gpio->gpio_chip.ngpio = CS47L85_NUM_GPIOS; |
| break; |
| case CS47L90: |
| case CS47L91: |
| madera_gpio->gpio_chip.ngpio = CS47L90_NUM_GPIOS; |
| break; |
| case CS42L92: |
| case CS47L92: |
| case CS47L93: |
| madera_gpio->gpio_chip.ngpio = CS47L92_NUM_GPIOS; |
| break; |
| default: |
| dev_err(&pdev->dev, "Unknown chip variant %d\n", madera->type); |
| return -EINVAL; |
| } |
| |
| /* We want to be usable on systems that don't use devicetree or acpi */ |
| if (pdata->gpio_base) |
| madera_gpio->gpio_chip.base = pdata->gpio_base; |
| else |
| madera_gpio->gpio_chip.base = -1; |
| |
| ret = devm_gpiochip_add_data(&pdev->dev, |
| &madera_gpio->gpio_chip, |
| madera_gpio); |
| if (ret < 0) { |
| dev_dbg(&pdev->dev, "Could not register gpiochip, %d\n", ret); |
| return ret; |
| } |
| |
| /* |
| * This is part of a composite MFD device which can only be used with |
| * the corresponding pinctrl driver. On all supported silicon the GPIO |
| * to pinctrl mapping is fixed in the silicon, so we register it |
| * explicitly instead of requiring a redundant gpio-ranges in the |
| * devicetree. |
| * In any case we also want to work on systems that don't use devicetree |
| * or acpi. |
| */ |
| ret = gpiochip_add_pin_range(&madera_gpio->gpio_chip, "madera-pinctrl", |
| 0, 0, madera_gpio->gpio_chip.ngpio); |
| if (ret) { |
| dev_dbg(&pdev->dev, "Failed to add pin range (%d)\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_driver madera_gpio_driver = { |
| .driver = { |
| .name = "madera-gpio", |
| }, |
| .probe = madera_gpio_probe, |
| }; |
| |
| module_platform_driver(madera_gpio_driver); |
| |
| MODULE_SOFTDEP("pre: pinctrl-madera"); |
| MODULE_DESCRIPTION("GPIO interface for Madera codecs"); |
| MODULE_AUTHOR("Nariman Poushin <nariman@opensource.cirrus.com>"); |
| MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:madera-gpio"); |