| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * f71805f.c - driver for the Fintek F71805F/FG and F71872F/FG Super-I/O |
| * chips integrated hardware monitoring features |
| * Copyright (C) 2005-2006 Jean Delvare <jdelvare@suse.de> |
| * |
| * The F71805F/FG is a LPC Super-I/O chip made by Fintek. It integrates |
| * complete hardware monitoring features: voltage, fan and temperature |
| * sensors, and manual and automatic fan speed control. |
| * |
| * The F71872F/FG is almost the same, with two more voltages monitored, |
| * and 6 VID inputs. |
| * |
| * The F71806F/FG is essentially the same as the F71872F/FG. It even has |
| * the same chip ID, so the driver can't differentiate between. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/platform_device.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/sysfs.h> |
| #include <linux/ioport.h> |
| #include <linux/acpi.h> |
| #include <linux/io.h> |
| |
| static unsigned short force_id; |
| module_param(force_id, ushort, 0); |
| MODULE_PARM_DESC(force_id, "Override the detected device ID"); |
| |
| static struct platform_device *pdev; |
| |
| #define DRVNAME "f71805f" |
| enum kinds { f71805f, f71872f }; |
| |
| /* |
| * Super-I/O constants and functions |
| */ |
| |
| #define F71805F_LD_HWM 0x04 |
| |
| #define SIO_REG_LDSEL 0x07 /* Logical device select */ |
| #define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ |
| #define SIO_REG_DEVREV 0x22 /* Device revision */ |
| #define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */ |
| #define SIO_REG_FNSEL1 0x29 /* Multi Function Select 1 (F71872F) */ |
| #define SIO_REG_ENABLE 0x30 /* Logical device enable */ |
| #define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ |
| |
| #define SIO_FINTEK_ID 0x1934 |
| #define SIO_F71805F_ID 0x0406 |
| #define SIO_F71872F_ID 0x0341 |
| |
| static inline int |
| superio_inb(int base, int reg) |
| { |
| outb(reg, base); |
| return inb(base + 1); |
| } |
| |
| static int |
| superio_inw(int base, int reg) |
| { |
| int val; |
| outb(reg++, base); |
| val = inb(base + 1) << 8; |
| outb(reg, base); |
| val |= inb(base + 1); |
| return val; |
| } |
| |
| static inline void |
| superio_select(int base, int ld) |
| { |
| outb(SIO_REG_LDSEL, base); |
| outb(ld, base + 1); |
| } |
| |
| static inline int |
| superio_enter(int base) |
| { |
| if (!request_muxed_region(base, 2, DRVNAME)) |
| return -EBUSY; |
| |
| outb(0x87, base); |
| outb(0x87, base); |
| |
| return 0; |
| } |
| |
| static inline void |
| superio_exit(int base) |
| { |
| outb(0xaa, base); |
| release_region(base, 2); |
| } |
| |
| /* |
| * ISA constants |
| */ |
| |
| #define REGION_LENGTH 8 |
| #define ADDR_REG_OFFSET 5 |
| #define DATA_REG_OFFSET 6 |
| |
| /* |
| * Registers |
| */ |
| |
| /* in nr from 0 to 10 (8-bit values) */ |
| #define F71805F_REG_IN(nr) (0x10 + (nr)) |
| #define F71805F_REG_IN_HIGH(nr) ((nr) < 10 ? 0x40 + 2 * (nr) : 0x2E) |
| #define F71805F_REG_IN_LOW(nr) ((nr) < 10 ? 0x41 + 2 * (nr) : 0x2F) |
| /* fan nr from 0 to 2 (12-bit values, two registers) */ |
| #define F71805F_REG_FAN(nr) (0x20 + 2 * (nr)) |
| #define F71805F_REG_FAN_LOW(nr) (0x28 + 2 * (nr)) |
| #define F71805F_REG_FAN_TARGET(nr) (0x69 + 16 * (nr)) |
| #define F71805F_REG_FAN_CTRL(nr) (0x60 + 16 * (nr)) |
| #define F71805F_REG_PWM_FREQ(nr) (0x63 + 16 * (nr)) |
| #define F71805F_REG_PWM_DUTY(nr) (0x6B + 16 * (nr)) |
| /* temp nr from 0 to 2 (8-bit values) */ |
| #define F71805F_REG_TEMP(nr) (0x1B + (nr)) |
| #define F71805F_REG_TEMP_HIGH(nr) (0x54 + 2 * (nr)) |
| #define F71805F_REG_TEMP_HYST(nr) (0x55 + 2 * (nr)) |
| #define F71805F_REG_TEMP_MODE 0x01 |
| /* pwm/fan pwmnr from 0 to 2, auto point apnr from 0 to 2 */ |
| /* map Fintek numbers to our numbers as follows: 9->0, 5->1, 1->2 */ |
| #define F71805F_REG_PWM_AUTO_POINT_TEMP(pwmnr, apnr) \ |
| (0xA0 + 0x10 * (pwmnr) + (2 - (apnr))) |
| #define F71805F_REG_PWM_AUTO_POINT_FAN(pwmnr, apnr) \ |
| (0xA4 + 0x10 * (pwmnr) + \ |
| 2 * (2 - (apnr))) |
| |
| #define F71805F_REG_START 0x00 |
| /* status nr from 0 to 2 */ |
| #define F71805F_REG_STATUS(nr) (0x36 + (nr)) |
| |
| /* individual register bits */ |
| #define FAN_CTRL_DC_MODE 0x10 |
| #define FAN_CTRL_LATCH_FULL 0x08 |
| #define FAN_CTRL_MODE_MASK 0x03 |
| #define FAN_CTRL_MODE_SPEED 0x00 |
| #define FAN_CTRL_MODE_TEMPERATURE 0x01 |
| #define FAN_CTRL_MODE_MANUAL 0x02 |
| |
| /* |
| * Data structures and manipulation thereof |
| */ |
| |
| struct f71805f_auto_point { |
| u8 temp[3]; |
| u16 fan[3]; |
| }; |
| |
| struct f71805f_data { |
| unsigned short addr; |
| const char *name; |
| struct device *hwmon_dev; |
| |
| struct mutex update_lock; |
| bool valid; /* true if following fields are valid */ |
| unsigned long last_updated; /* In jiffies */ |
| unsigned long last_limits; /* In jiffies */ |
| |
| /* Register values */ |
| u8 in[11]; |
| u8 in_high[11]; |
| u8 in_low[11]; |
| u16 has_in; |
| u16 fan[3]; |
| u16 fan_low[3]; |
| u16 fan_target[3]; |
| u8 fan_ctrl[3]; |
| u8 pwm[3]; |
| u8 pwm_freq[3]; |
| u8 temp[3]; |
| u8 temp_high[3]; |
| u8 temp_hyst[3]; |
| u8 temp_mode; |
| unsigned long alarms; |
| struct f71805f_auto_point auto_points[3]; |
| }; |
| |
| struct f71805f_sio_data { |
| enum kinds kind; |
| u8 fnsel1; |
| }; |
| |
| static inline long in_from_reg(u8 reg) |
| { |
| return reg * 8; |
| } |
| |
| /* The 2 least significant bits are not used */ |
| static inline u8 in_to_reg(long val) |
| { |
| if (val <= 0) |
| return 0; |
| if (val >= 2016) |
| return 0xfc; |
| return ((val + 16) / 32) << 2; |
| } |
| |
| /* in0 is downscaled by a factor 2 internally */ |
| static inline long in0_from_reg(u8 reg) |
| { |
| return reg * 16; |
| } |
| |
| static inline u8 in0_to_reg(long val) |
| { |
| if (val <= 0) |
| return 0; |
| if (val >= 4032) |
| return 0xfc; |
| return ((val + 32) / 64) << 2; |
| } |
| |
| /* The 4 most significant bits are not used */ |
| static inline long fan_from_reg(u16 reg) |
| { |
| reg &= 0xfff; |
| if (!reg || reg == 0xfff) |
| return 0; |
| return 1500000 / reg; |
| } |
| |
| static inline u16 fan_to_reg(long rpm) |
| { |
| /* |
| * If the low limit is set below what the chip can measure, |
| * store the largest possible 12-bit value in the registers, |
| * so that no alarm will ever trigger. |
| */ |
| if (rpm < 367) |
| return 0xfff; |
| return 1500000 / rpm; |
| } |
| |
| static inline unsigned long pwm_freq_from_reg(u8 reg) |
| { |
| unsigned long clock = (reg & 0x80) ? 48000000UL : 1000000UL; |
| |
| reg &= 0x7f; |
| if (reg == 0) |
| reg++; |
| return clock / (reg << 8); |
| } |
| |
| static inline u8 pwm_freq_to_reg(unsigned long val) |
| { |
| if (val >= 187500) /* The highest we can do */ |
| return 0x80; |
| if (val >= 1475) /* Use 48 MHz clock */ |
| return 0x80 | (48000000UL / (val << 8)); |
| if (val < 31) /* The lowest we can do */ |
| return 0x7f; |
| else /* Use 1 MHz clock */ |
| return 1000000UL / (val << 8); |
| } |
| |
| static inline int pwm_mode_from_reg(u8 reg) |
| { |
| return !(reg & FAN_CTRL_DC_MODE); |
| } |
| |
| static inline long temp_from_reg(u8 reg) |
| { |
| return reg * 1000; |
| } |
| |
| static inline u8 temp_to_reg(long val) |
| { |
| if (val <= 0) |
| return 0; |
| if (val >= 1000 * 0xff) |
| return 0xff; |
| return (val + 500) / 1000; |
| } |
| |
| /* |
| * Device I/O access |
| */ |
| |
| /* Must be called with data->update_lock held, except during initialization */ |
| static u8 f71805f_read8(struct f71805f_data *data, u8 reg) |
| { |
| outb(reg, data->addr + ADDR_REG_OFFSET); |
| return inb(data->addr + DATA_REG_OFFSET); |
| } |
| |
| /* Must be called with data->update_lock held, except during initialization */ |
| static void f71805f_write8(struct f71805f_data *data, u8 reg, u8 val) |
| { |
| outb(reg, data->addr + ADDR_REG_OFFSET); |
| outb(val, data->addr + DATA_REG_OFFSET); |
| } |
| |
| /* |
| * It is important to read the MSB first, because doing so latches the |
| * value of the LSB, so we are sure both bytes belong to the same value. |
| * Must be called with data->update_lock held, except during initialization |
| */ |
| static u16 f71805f_read16(struct f71805f_data *data, u8 reg) |
| { |
| u16 val; |
| |
| outb(reg, data->addr + ADDR_REG_OFFSET); |
| val = inb(data->addr + DATA_REG_OFFSET) << 8; |
| outb(++reg, data->addr + ADDR_REG_OFFSET); |
| val |= inb(data->addr + DATA_REG_OFFSET); |
| |
| return val; |
| } |
| |
| /* Must be called with data->update_lock held, except during initialization */ |
| static void f71805f_write16(struct f71805f_data *data, u8 reg, u16 val) |
| { |
| outb(reg, data->addr + ADDR_REG_OFFSET); |
| outb(val >> 8, data->addr + DATA_REG_OFFSET); |
| outb(++reg, data->addr + ADDR_REG_OFFSET); |
| outb(val & 0xff, data->addr + DATA_REG_OFFSET); |
| } |
| |
| static struct f71805f_data *f71805f_update_device(struct device *dev) |
| { |
| struct f71805f_data *data = dev_get_drvdata(dev); |
| int nr, apnr; |
| |
| mutex_lock(&data->update_lock); |
| |
| /* Limit registers cache is refreshed after 60 seconds */ |
| if (time_after(jiffies, data->last_updated + 60 * HZ) |
| || !data->valid) { |
| for (nr = 0; nr < 11; nr++) { |
| if (!(data->has_in & (1 << nr))) |
| continue; |
| data->in_high[nr] = f71805f_read8(data, |
| F71805F_REG_IN_HIGH(nr)); |
| data->in_low[nr] = f71805f_read8(data, |
| F71805F_REG_IN_LOW(nr)); |
| } |
| for (nr = 0; nr < 3; nr++) { |
| data->fan_low[nr] = f71805f_read16(data, |
| F71805F_REG_FAN_LOW(nr)); |
| data->fan_target[nr] = f71805f_read16(data, |
| F71805F_REG_FAN_TARGET(nr)); |
| data->pwm_freq[nr] = f71805f_read8(data, |
| F71805F_REG_PWM_FREQ(nr)); |
| } |
| for (nr = 0; nr < 3; nr++) { |
| data->temp_high[nr] = f71805f_read8(data, |
| F71805F_REG_TEMP_HIGH(nr)); |
| data->temp_hyst[nr] = f71805f_read8(data, |
| F71805F_REG_TEMP_HYST(nr)); |
| } |
| data->temp_mode = f71805f_read8(data, F71805F_REG_TEMP_MODE); |
| for (nr = 0; nr < 3; nr++) { |
| for (apnr = 0; apnr < 3; apnr++) { |
| data->auto_points[nr].temp[apnr] = |
| f71805f_read8(data, |
| F71805F_REG_PWM_AUTO_POINT_TEMP(nr, |
| apnr)); |
| data->auto_points[nr].fan[apnr] = |
| f71805f_read16(data, |
| F71805F_REG_PWM_AUTO_POINT_FAN(nr, |
| apnr)); |
| } |
| } |
| |
| data->last_limits = jiffies; |
| } |
| |
| /* Measurement registers cache is refreshed after 1 second */ |
| if (time_after(jiffies, data->last_updated + HZ) |
| || !data->valid) { |
| for (nr = 0; nr < 11; nr++) { |
| if (!(data->has_in & (1 << nr))) |
| continue; |
| data->in[nr] = f71805f_read8(data, |
| F71805F_REG_IN(nr)); |
| } |
| for (nr = 0; nr < 3; nr++) { |
| data->fan[nr] = f71805f_read16(data, |
| F71805F_REG_FAN(nr)); |
| data->fan_ctrl[nr] = f71805f_read8(data, |
| F71805F_REG_FAN_CTRL(nr)); |
| data->pwm[nr] = f71805f_read8(data, |
| F71805F_REG_PWM_DUTY(nr)); |
| } |
| for (nr = 0; nr < 3; nr++) { |
| data->temp[nr] = f71805f_read8(data, |
| F71805F_REG_TEMP(nr)); |
| } |
| data->alarms = f71805f_read8(data, F71805F_REG_STATUS(0)) |
| + (f71805f_read8(data, F71805F_REG_STATUS(1)) << 8) |
| + (f71805f_read8(data, F71805F_REG_STATUS(2)) << 16); |
| |
| data->last_updated = jiffies; |
| data->valid = true; |
| } |
| |
| mutex_unlock(&data->update_lock); |
| |
| return data; |
| } |
| |
| /* |
| * Sysfs interface |
| */ |
| |
| static ssize_t show_in0(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| |
| return sprintf(buf, "%ld\n", in0_from_reg(data->in[nr])); |
| } |
| |
| static ssize_t show_in0_max(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| |
| return sprintf(buf, "%ld\n", in0_from_reg(data->in_high[nr])); |
| } |
| |
| static ssize_t show_in0_min(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| |
| return sprintf(buf, "%ld\n", in0_from_reg(data->in_low[nr])); |
| } |
| |
| static ssize_t set_in0_max(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71805f_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| long val; |
| int err; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->in_high[nr] = in0_to_reg(val); |
| f71805f_write8(data, F71805F_REG_IN_HIGH(nr), data->in_high[nr]); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t set_in0_min(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71805f_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| long val; |
| int err; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->in_low[nr] = in0_to_reg(val); |
| f71805f_write8(data, F71805F_REG_IN_LOW(nr), data->in_low[nr]); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_in(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| |
| return sprintf(buf, "%ld\n", in_from_reg(data->in[nr])); |
| } |
| |
| static ssize_t show_in_max(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| |
| return sprintf(buf, "%ld\n", in_from_reg(data->in_high[nr])); |
| } |
| |
| static ssize_t show_in_min(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| |
| return sprintf(buf, "%ld\n", in_from_reg(data->in_low[nr])); |
| } |
| |
| static ssize_t set_in_max(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71805f_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| long val; |
| int err; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->in_high[nr] = in_to_reg(val); |
| f71805f_write8(data, F71805F_REG_IN_HIGH(nr), data->in_high[nr]); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t set_in_min(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71805f_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| long val; |
| int err; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->in_low[nr] = in_to_reg(val); |
| f71805f_write8(data, F71805F_REG_IN_LOW(nr), data->in_low[nr]); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| |
| return sprintf(buf, "%ld\n", fan_from_reg(data->fan[nr])); |
| } |
| |
| static ssize_t show_fan_min(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| |
| return sprintf(buf, "%ld\n", fan_from_reg(data->fan_low[nr])); |
| } |
| |
| static ssize_t show_fan_target(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| |
| return sprintf(buf, "%ld\n", fan_from_reg(data->fan_target[nr])); |
| } |
| |
| static ssize_t set_fan_min(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71805f_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| long val; |
| int err; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->fan_low[nr] = fan_to_reg(val); |
| f71805f_write16(data, F71805F_REG_FAN_LOW(nr), data->fan_low[nr]); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t set_fan_target(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71805f_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| long val; |
| int err; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->fan_target[nr] = fan_to_reg(val); |
| f71805f_write16(data, F71805F_REG_FAN_TARGET(nr), |
| data->fan_target[nr]); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| |
| return sprintf(buf, "%d\n", (int)data->pwm[nr]); |
| } |
| |
| static ssize_t show_pwm_enable(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| int mode; |
| |
| switch (data->fan_ctrl[nr] & FAN_CTRL_MODE_MASK) { |
| case FAN_CTRL_MODE_SPEED: |
| mode = 3; |
| break; |
| case FAN_CTRL_MODE_TEMPERATURE: |
| mode = 2; |
| break; |
| default: /* MANUAL */ |
| mode = 1; |
| } |
| |
| return sprintf(buf, "%d\n", mode); |
| } |
| |
| static ssize_t show_pwm_freq(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| |
| return sprintf(buf, "%lu\n", pwm_freq_from_reg(data->pwm_freq[nr])); |
| } |
| |
| static ssize_t show_pwm_mode(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| |
| return sprintf(buf, "%d\n", pwm_mode_from_reg(data->fan_ctrl[nr])); |
| } |
| |
| static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct f71805f_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err) |
| return err; |
| |
| if (val > 255) |
| return -EINVAL; |
| |
| mutex_lock(&data->update_lock); |
| data->pwm[nr] = val; |
| f71805f_write8(data, F71805F_REG_PWM_DUTY(nr), data->pwm[nr]); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static struct attribute *f71805f_attr_pwm[]; |
| |
| static ssize_t set_pwm_enable(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71805f_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| u8 reg; |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err) |
| return err; |
| |
| if (val < 1 || val > 3) |
| return -EINVAL; |
| |
| if (val > 1) { /* Automatic mode, user can't set PWM value */ |
| if (sysfs_chmod_file(&dev->kobj, f71805f_attr_pwm[nr], |
| S_IRUGO)) |
| dev_dbg(dev, "chmod -w pwm%d failed\n", nr + 1); |
| } |
| |
| mutex_lock(&data->update_lock); |
| reg = f71805f_read8(data, F71805F_REG_FAN_CTRL(nr)) |
| & ~FAN_CTRL_MODE_MASK; |
| switch (val) { |
| case 1: |
| reg |= FAN_CTRL_MODE_MANUAL; |
| break; |
| case 2: |
| reg |= FAN_CTRL_MODE_TEMPERATURE; |
| break; |
| case 3: |
| reg |= FAN_CTRL_MODE_SPEED; |
| break; |
| } |
| data->fan_ctrl[nr] = reg; |
| f71805f_write8(data, F71805F_REG_FAN_CTRL(nr), reg); |
| mutex_unlock(&data->update_lock); |
| |
| if (val == 1) { /* Manual mode, user can set PWM value */ |
| if (sysfs_chmod_file(&dev->kobj, f71805f_attr_pwm[nr], |
| S_IRUGO | S_IWUSR)) |
| dev_dbg(dev, "chmod +w pwm%d failed\n", nr + 1); |
| } |
| |
| return count; |
| } |
| |
| static ssize_t set_pwm_freq(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71805f_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->pwm_freq[nr] = pwm_freq_to_reg(val); |
| f71805f_write8(data, F71805F_REG_PWM_FREQ(nr), data->pwm_freq[nr]); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_pwm_auto_point_temp(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct f71805f_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); |
| int pwmnr = attr->nr; |
| int apnr = attr->index; |
| |
| return sprintf(buf, "%ld\n", |
| temp_from_reg(data->auto_points[pwmnr].temp[apnr])); |
| } |
| |
| static ssize_t set_pwm_auto_point_temp(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct f71805f_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); |
| int pwmnr = attr->nr; |
| int apnr = attr->index; |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->auto_points[pwmnr].temp[apnr] = temp_to_reg(val); |
| f71805f_write8(data, F71805F_REG_PWM_AUTO_POINT_TEMP(pwmnr, apnr), |
| data->auto_points[pwmnr].temp[apnr]); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_pwm_auto_point_fan(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct f71805f_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); |
| int pwmnr = attr->nr; |
| int apnr = attr->index; |
| |
| return sprintf(buf, "%ld\n", |
| fan_from_reg(data->auto_points[pwmnr].fan[apnr])); |
| } |
| |
| static ssize_t set_pwm_auto_point_fan(struct device *dev, |
| struct device_attribute *devattr, |
| const char *buf, size_t count) |
| { |
| struct f71805f_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); |
| int pwmnr = attr->nr; |
| int apnr = attr->index; |
| unsigned long val; |
| int err; |
| |
| err = kstrtoul(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->auto_points[pwmnr].fan[apnr] = fan_to_reg(val); |
| f71805f_write16(data, F71805F_REG_PWM_AUTO_POINT_FAN(pwmnr, apnr), |
| data->auto_points[pwmnr].fan[apnr]); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, |
| char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| |
| return sprintf(buf, "%ld\n", temp_from_reg(data->temp[nr])); |
| } |
| |
| static ssize_t show_temp_max(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| |
| return sprintf(buf, "%ld\n", temp_from_reg(data->temp_high[nr])); |
| } |
| |
| static ssize_t show_temp_hyst(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| |
| return sprintf(buf, "%ld\n", temp_from_reg(data->temp_hyst[nr])); |
| } |
| |
| static ssize_t show_temp_type(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| |
| /* 3 is diode, 4 is thermistor */ |
| return sprintf(buf, "%u\n", (data->temp_mode & (1 << nr)) ? 3 : 4); |
| } |
| |
| static ssize_t set_temp_max(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71805f_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| long val; |
| int err; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->temp_high[nr] = temp_to_reg(val); |
| f71805f_write8(data, F71805F_REG_TEMP_HIGH(nr), data->temp_high[nr]); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t set_temp_hyst(struct device *dev, struct device_attribute |
| *devattr, const char *buf, size_t count) |
| { |
| struct f71805f_data *data = dev_get_drvdata(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int nr = attr->index; |
| long val; |
| int err; |
| |
| err = kstrtol(buf, 10, &val); |
| if (err) |
| return err; |
| |
| mutex_lock(&data->update_lock); |
| data->temp_hyst[nr] = temp_to_reg(val); |
| f71805f_write8(data, F71805F_REG_TEMP_HYST(nr), data->temp_hyst[nr]); |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t alarms_in_show(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| |
| return sprintf(buf, "%lu\n", data->alarms & 0x7ff); |
| } |
| |
| static ssize_t alarms_fan_show(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| |
| return sprintf(buf, "%lu\n", (data->alarms >> 16) & 0x07); |
| } |
| |
| static ssize_t alarms_temp_show(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| |
| return sprintf(buf, "%lu\n", (data->alarms >> 11) & 0x07); |
| } |
| |
| static ssize_t show_alarm(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71805f_data *data = f71805f_update_device(dev); |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| int bitnr = attr->index; |
| |
| return sprintf(buf, "%lu\n", (data->alarms >> bitnr) & 1); |
| } |
| |
| static ssize_t name_show(struct device *dev, struct device_attribute |
| *devattr, char *buf) |
| { |
| struct f71805f_data *data = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%s\n", data->name); |
| } |
| |
| static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in0, NULL, 0); |
| static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR, |
| show_in0_max, set_in0_max, 0); |
| static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR, |
| show_in0_min, set_in0_min, 0); |
| static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1); |
| static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO | S_IWUSR, |
| show_in_max, set_in_max, 1); |
| static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO | S_IWUSR, |
| show_in_min, set_in_min, 1); |
| static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2); |
| static SENSOR_DEVICE_ATTR(in2_max, S_IRUGO | S_IWUSR, |
| show_in_max, set_in_max, 2); |
| static SENSOR_DEVICE_ATTR(in2_min, S_IRUGO | S_IWUSR, |
| show_in_min, set_in_min, 2); |
| static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3); |
| static SENSOR_DEVICE_ATTR(in3_max, S_IRUGO | S_IWUSR, |
| show_in_max, set_in_max, 3); |
| static SENSOR_DEVICE_ATTR(in3_min, S_IRUGO | S_IWUSR, |
| show_in_min, set_in_min, 3); |
| static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_in, NULL, 4); |
| static SENSOR_DEVICE_ATTR(in4_max, S_IRUGO | S_IWUSR, |
| show_in_max, set_in_max, 4); |
| static SENSOR_DEVICE_ATTR(in4_min, S_IRUGO | S_IWUSR, |
| show_in_min, set_in_min, 4); |
| static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_in, NULL, 5); |
| static SENSOR_DEVICE_ATTR(in5_max, S_IRUGO | S_IWUSR, |
| show_in_max, set_in_max, 5); |
| static SENSOR_DEVICE_ATTR(in5_min, S_IRUGO | S_IWUSR, |
| show_in_min, set_in_min, 5); |
| static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_in, NULL, 6); |
| static SENSOR_DEVICE_ATTR(in6_max, S_IRUGO | S_IWUSR, |
| show_in_max, set_in_max, 6); |
| static SENSOR_DEVICE_ATTR(in6_min, S_IRUGO | S_IWUSR, |
| show_in_min, set_in_min, 6); |
| static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_in, NULL, 7); |
| static SENSOR_DEVICE_ATTR(in7_max, S_IRUGO | S_IWUSR, |
| show_in_max, set_in_max, 7); |
| static SENSOR_DEVICE_ATTR(in7_min, S_IRUGO | S_IWUSR, |
| show_in_min, set_in_min, 7); |
| static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_in, NULL, 8); |
| static SENSOR_DEVICE_ATTR(in8_max, S_IRUGO | S_IWUSR, |
| show_in_max, set_in_max, 8); |
| static SENSOR_DEVICE_ATTR(in8_min, S_IRUGO | S_IWUSR, |
| show_in_min, set_in_min, 8); |
| static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_in0, NULL, 9); |
| static SENSOR_DEVICE_ATTR(in9_max, S_IRUGO | S_IWUSR, |
| show_in0_max, set_in0_max, 9); |
| static SENSOR_DEVICE_ATTR(in9_min, S_IRUGO | S_IWUSR, |
| show_in0_min, set_in0_min, 9); |
| static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_in0, NULL, 10); |
| static SENSOR_DEVICE_ATTR(in10_max, S_IRUGO | S_IWUSR, |
| show_in0_max, set_in0_max, 10); |
| static SENSOR_DEVICE_ATTR(in10_min, S_IRUGO | S_IWUSR, |
| show_in0_min, set_in0_min, 10); |
| |
| static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); |
| static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR, |
| show_fan_min, set_fan_min, 0); |
| static SENSOR_DEVICE_ATTR(fan1_target, S_IRUGO | S_IWUSR, |
| show_fan_target, set_fan_target, 0); |
| static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); |
| static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR, |
| show_fan_min, set_fan_min, 1); |
| static SENSOR_DEVICE_ATTR(fan2_target, S_IRUGO | S_IWUSR, |
| show_fan_target, set_fan_target, 1); |
| static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); |
| static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR, |
| show_fan_min, set_fan_min, 2); |
| static SENSOR_DEVICE_ATTR(fan3_target, S_IRUGO | S_IWUSR, |
| show_fan_target, set_fan_target, 2); |
| |
| static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); |
| static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, |
| show_temp_max, set_temp_max, 0); |
| static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, |
| show_temp_hyst, set_temp_hyst, 0); |
| static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0); |
| static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); |
| static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR, |
| show_temp_max, set_temp_max, 1); |
| static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR, |
| show_temp_hyst, set_temp_hyst, 1); |
| static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1); |
| static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); |
| static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO | S_IWUSR, |
| show_temp_max, set_temp_max, 2); |
| static SENSOR_DEVICE_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR, |
| show_temp_hyst, set_temp_hyst, 2); |
| static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2); |
| |
| /* |
| * pwm (value) files are created read-only, write permission is |
| * then added or removed dynamically as needed |
| */ |
| static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO, show_pwm, set_pwm, 0); |
| static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, |
| show_pwm_enable, set_pwm_enable, 0); |
| static SENSOR_DEVICE_ATTR(pwm1_freq, S_IRUGO | S_IWUSR, |
| show_pwm_freq, set_pwm_freq, 0); |
| static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, show_pwm_mode, NULL, 0); |
| static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO, show_pwm, set_pwm, 1); |
| static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR, |
| show_pwm_enable, set_pwm_enable, 1); |
| static SENSOR_DEVICE_ATTR(pwm2_freq, S_IRUGO | S_IWUSR, |
| show_pwm_freq, set_pwm_freq, 1); |
| static SENSOR_DEVICE_ATTR(pwm2_mode, S_IRUGO, show_pwm_mode, NULL, 1); |
| static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO, show_pwm, set_pwm, 2); |
| static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR, |
| show_pwm_enable, set_pwm_enable, 2); |
| static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO | S_IWUSR, |
| show_pwm_freq, set_pwm_freq, 2); |
| static SENSOR_DEVICE_ATTR(pwm3_mode, S_IRUGO, show_pwm_mode, NULL, 2); |
| |
| static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_temp, set_pwm_auto_point_temp, |
| 0, 0); |
| static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_fan, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_fan, set_pwm_auto_point_fan, |
| 0, 0); |
| static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_temp, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_temp, set_pwm_auto_point_temp, |
| 0, 1); |
| static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_fan, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_fan, set_pwm_auto_point_fan, |
| 0, 1); |
| static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_temp, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_temp, set_pwm_auto_point_temp, |
| 0, 2); |
| static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_fan, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_fan, set_pwm_auto_point_fan, |
| 0, 2); |
| |
| static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_temp, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_temp, set_pwm_auto_point_temp, |
| 1, 0); |
| static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_fan, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_fan, set_pwm_auto_point_fan, |
| 1, 0); |
| static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_temp, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_temp, set_pwm_auto_point_temp, |
| 1, 1); |
| static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_fan, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_fan, set_pwm_auto_point_fan, |
| 1, 1); |
| static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_temp, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_temp, set_pwm_auto_point_temp, |
| 1, 2); |
| static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_fan, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_fan, set_pwm_auto_point_fan, |
| 1, 2); |
| |
| static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_temp, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_temp, set_pwm_auto_point_temp, |
| 2, 0); |
| static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_fan, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_fan, set_pwm_auto_point_fan, |
| 2, 0); |
| static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_temp, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_temp, set_pwm_auto_point_temp, |
| 2, 1); |
| static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_fan, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_fan, set_pwm_auto_point_fan, |
| 2, 1); |
| static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_temp, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_temp, set_pwm_auto_point_temp, |
| 2, 2); |
| static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_fan, S_IRUGO | S_IWUSR, |
| show_pwm_auto_point_fan, set_pwm_auto_point_fan, |
| 2, 2); |
| |
| static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); |
| static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); |
| static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); |
| static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); |
| static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 4); |
| static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 5); |
| static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 6); |
| static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 7); |
| static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 8); |
| static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, 9); |
| static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_alarm, NULL, 10); |
| static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 11); |
| static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 12); |
| static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13); |
| static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 16); |
| static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 17); |
| static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 18); |
| static DEVICE_ATTR_RO(alarms_in); |
| static DEVICE_ATTR_RO(alarms_fan); |
| static DEVICE_ATTR_RO(alarms_temp); |
| |
| static DEVICE_ATTR_RO(name); |
| |
| static struct attribute *f71805f_attributes[] = { |
| &sensor_dev_attr_in0_input.dev_attr.attr, |
| &sensor_dev_attr_in0_max.dev_attr.attr, |
| &sensor_dev_attr_in0_min.dev_attr.attr, |
| &sensor_dev_attr_in1_input.dev_attr.attr, |
| &sensor_dev_attr_in1_max.dev_attr.attr, |
| &sensor_dev_attr_in1_min.dev_attr.attr, |
| &sensor_dev_attr_in2_input.dev_attr.attr, |
| &sensor_dev_attr_in2_max.dev_attr.attr, |
| &sensor_dev_attr_in2_min.dev_attr.attr, |
| &sensor_dev_attr_in3_input.dev_attr.attr, |
| &sensor_dev_attr_in3_max.dev_attr.attr, |
| &sensor_dev_attr_in3_min.dev_attr.attr, |
| &sensor_dev_attr_in5_input.dev_attr.attr, |
| &sensor_dev_attr_in5_max.dev_attr.attr, |
| &sensor_dev_attr_in5_min.dev_attr.attr, |
| &sensor_dev_attr_in6_input.dev_attr.attr, |
| &sensor_dev_attr_in6_max.dev_attr.attr, |
| &sensor_dev_attr_in6_min.dev_attr.attr, |
| &sensor_dev_attr_in7_input.dev_attr.attr, |
| &sensor_dev_attr_in7_max.dev_attr.attr, |
| &sensor_dev_attr_in7_min.dev_attr.attr, |
| |
| &sensor_dev_attr_fan1_input.dev_attr.attr, |
| &sensor_dev_attr_fan1_min.dev_attr.attr, |
| &sensor_dev_attr_fan1_alarm.dev_attr.attr, |
| &sensor_dev_attr_fan1_target.dev_attr.attr, |
| &sensor_dev_attr_fan2_input.dev_attr.attr, |
| &sensor_dev_attr_fan2_min.dev_attr.attr, |
| &sensor_dev_attr_fan2_alarm.dev_attr.attr, |
| &sensor_dev_attr_fan2_target.dev_attr.attr, |
| &sensor_dev_attr_fan3_input.dev_attr.attr, |
| &sensor_dev_attr_fan3_min.dev_attr.attr, |
| &sensor_dev_attr_fan3_alarm.dev_attr.attr, |
| &sensor_dev_attr_fan3_target.dev_attr.attr, |
| |
| &sensor_dev_attr_pwm1.dev_attr.attr, |
| &sensor_dev_attr_pwm1_enable.dev_attr.attr, |
| &sensor_dev_attr_pwm1_mode.dev_attr.attr, |
| &sensor_dev_attr_pwm2.dev_attr.attr, |
| &sensor_dev_attr_pwm2_enable.dev_attr.attr, |
| &sensor_dev_attr_pwm2_mode.dev_attr.attr, |
| &sensor_dev_attr_pwm3.dev_attr.attr, |
| &sensor_dev_attr_pwm3_enable.dev_attr.attr, |
| &sensor_dev_attr_pwm3_mode.dev_attr.attr, |
| |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| &sensor_dev_attr_temp1_max.dev_attr.attr, |
| &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, |
| &sensor_dev_attr_temp1_type.dev_attr.attr, |
| &sensor_dev_attr_temp2_input.dev_attr.attr, |
| &sensor_dev_attr_temp2_max.dev_attr.attr, |
| &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, |
| &sensor_dev_attr_temp2_type.dev_attr.attr, |
| &sensor_dev_attr_temp3_input.dev_attr.attr, |
| &sensor_dev_attr_temp3_max.dev_attr.attr, |
| &sensor_dev_attr_temp3_max_hyst.dev_attr.attr, |
| &sensor_dev_attr_temp3_type.dev_attr.attr, |
| |
| &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point1_fan.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point2_fan.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm1_auto_point3_fan.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point1_fan.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point2_fan.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm2_auto_point3_fan.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point1_fan.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point2_fan.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point3_temp.dev_attr.attr, |
| &sensor_dev_attr_pwm3_auto_point3_fan.dev_attr.attr, |
| |
| &sensor_dev_attr_in0_alarm.dev_attr.attr, |
| &sensor_dev_attr_in1_alarm.dev_attr.attr, |
| &sensor_dev_attr_in2_alarm.dev_attr.attr, |
| &sensor_dev_attr_in3_alarm.dev_attr.attr, |
| &sensor_dev_attr_in5_alarm.dev_attr.attr, |
| &sensor_dev_attr_in6_alarm.dev_attr.attr, |
| &sensor_dev_attr_in7_alarm.dev_attr.attr, |
| &dev_attr_alarms_in.attr, |
| &sensor_dev_attr_temp1_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp2_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp3_alarm.dev_attr.attr, |
| &dev_attr_alarms_temp.attr, |
| &dev_attr_alarms_fan.attr, |
| |
| &dev_attr_name.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group f71805f_group = { |
| .attrs = f71805f_attributes, |
| }; |
| |
| static struct attribute *f71805f_attributes_optin[4][5] = { |
| { |
| &sensor_dev_attr_in4_input.dev_attr.attr, |
| &sensor_dev_attr_in4_max.dev_attr.attr, |
| &sensor_dev_attr_in4_min.dev_attr.attr, |
| &sensor_dev_attr_in4_alarm.dev_attr.attr, |
| NULL |
| }, { |
| &sensor_dev_attr_in8_input.dev_attr.attr, |
| &sensor_dev_attr_in8_max.dev_attr.attr, |
| &sensor_dev_attr_in8_min.dev_attr.attr, |
| &sensor_dev_attr_in8_alarm.dev_attr.attr, |
| NULL |
| }, { |
| &sensor_dev_attr_in9_input.dev_attr.attr, |
| &sensor_dev_attr_in9_max.dev_attr.attr, |
| &sensor_dev_attr_in9_min.dev_attr.attr, |
| &sensor_dev_attr_in9_alarm.dev_attr.attr, |
| NULL |
| }, { |
| &sensor_dev_attr_in10_input.dev_attr.attr, |
| &sensor_dev_attr_in10_max.dev_attr.attr, |
| &sensor_dev_attr_in10_min.dev_attr.attr, |
| &sensor_dev_attr_in10_alarm.dev_attr.attr, |
| NULL |
| } |
| }; |
| |
| static const struct attribute_group f71805f_group_optin[4] = { |
| { .attrs = f71805f_attributes_optin[0] }, |
| { .attrs = f71805f_attributes_optin[1] }, |
| { .attrs = f71805f_attributes_optin[2] }, |
| { .attrs = f71805f_attributes_optin[3] }, |
| }; |
| |
| /* |
| * We don't include pwm_freq files in the arrays above, because they must be |
| * created conditionally (only if pwm_mode is 1 == PWM) |
| */ |
| static struct attribute *f71805f_attributes_pwm_freq[] = { |
| &sensor_dev_attr_pwm1_freq.dev_attr.attr, |
| &sensor_dev_attr_pwm2_freq.dev_attr.attr, |
| &sensor_dev_attr_pwm3_freq.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group f71805f_group_pwm_freq = { |
| .attrs = f71805f_attributes_pwm_freq, |
| }; |
| |
| /* We also need an indexed access to pwmN files to toggle writability */ |
| static struct attribute *f71805f_attr_pwm[] = { |
| &sensor_dev_attr_pwm1.dev_attr.attr, |
| &sensor_dev_attr_pwm2.dev_attr.attr, |
| &sensor_dev_attr_pwm3.dev_attr.attr, |
| }; |
| |
| /* |
| * Device registration and initialization |
| */ |
| |
| static void f71805f_init_device(struct f71805f_data *data) |
| { |
| u8 reg; |
| int i; |
| |
| reg = f71805f_read8(data, F71805F_REG_START); |
| if ((reg & 0x41) != 0x01) { |
| pr_debug("Starting monitoring operations\n"); |
| f71805f_write8(data, F71805F_REG_START, (reg | 0x01) & ~0x40); |
| } |
| |
| /* |
| * Fan monitoring can be disabled. If it is, we won't be polling |
| * the register values, and won't create the related sysfs files. |
| */ |
| for (i = 0; i < 3; i++) { |
| data->fan_ctrl[i] = f71805f_read8(data, |
| F71805F_REG_FAN_CTRL(i)); |
| /* |
| * Clear latch full bit, else "speed mode" fan speed control |
| * doesn't work |
| */ |
| if (data->fan_ctrl[i] & FAN_CTRL_LATCH_FULL) { |
| data->fan_ctrl[i] &= ~FAN_CTRL_LATCH_FULL; |
| f71805f_write8(data, F71805F_REG_FAN_CTRL(i), |
| data->fan_ctrl[i]); |
| } |
| } |
| } |
| |
| static int f71805f_probe(struct platform_device *pdev) |
| { |
| struct f71805f_sio_data *sio_data = dev_get_platdata(&pdev->dev); |
| struct f71805f_data *data; |
| struct resource *res; |
| int i, err; |
| |
| static const char * const names[] = { |
| "f71805f", |
| "f71872f", |
| }; |
| |
| data = devm_kzalloc(&pdev->dev, sizeof(struct f71805f_data), |
| GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_IO, 0); |
| if (!devm_request_region(&pdev->dev, res->start + ADDR_REG_OFFSET, 2, |
| DRVNAME)) { |
| dev_err(&pdev->dev, "Failed to request region 0x%lx-0x%lx\n", |
| (unsigned long)(res->start + ADDR_REG_OFFSET), |
| (unsigned long)(res->start + ADDR_REG_OFFSET + 1)); |
| return -EBUSY; |
| } |
| data->addr = res->start; |
| data->name = names[sio_data->kind]; |
| mutex_init(&data->update_lock); |
| |
| platform_set_drvdata(pdev, data); |
| |
| /* Some voltage inputs depend on chip model and configuration */ |
| switch (sio_data->kind) { |
| case f71805f: |
| data->has_in = 0x1ff; |
| break; |
| case f71872f: |
| data->has_in = 0x6ef; |
| if (sio_data->fnsel1 & 0x01) |
| data->has_in |= (1 << 4); /* in4 */ |
| if (sio_data->fnsel1 & 0x02) |
| data->has_in |= (1 << 8); /* in8 */ |
| break; |
| } |
| |
| /* Initialize the F71805F chip */ |
| f71805f_init_device(data); |
| |
| /* Register sysfs interface files */ |
| err = sysfs_create_group(&pdev->dev.kobj, &f71805f_group); |
| if (err) |
| return err; |
| if (data->has_in & (1 << 4)) { /* in4 */ |
| err = sysfs_create_group(&pdev->dev.kobj, |
| &f71805f_group_optin[0]); |
| if (err) |
| goto exit_remove_files; |
| } |
| if (data->has_in & (1 << 8)) { /* in8 */ |
| err = sysfs_create_group(&pdev->dev.kobj, |
| &f71805f_group_optin[1]); |
| if (err) |
| goto exit_remove_files; |
| } |
| if (data->has_in & (1 << 9)) { /* in9 (F71872F/FG only) */ |
| err = sysfs_create_group(&pdev->dev.kobj, |
| &f71805f_group_optin[2]); |
| if (err) |
| goto exit_remove_files; |
| } |
| if (data->has_in & (1 << 10)) { /* in9 (F71872F/FG only) */ |
| err = sysfs_create_group(&pdev->dev.kobj, |
| &f71805f_group_optin[3]); |
| if (err) |
| goto exit_remove_files; |
| } |
| for (i = 0; i < 3; i++) { |
| /* If control mode is PWM, create pwm_freq file */ |
| if (!(data->fan_ctrl[i] & FAN_CTRL_DC_MODE)) { |
| err = sysfs_create_file(&pdev->dev.kobj, |
| f71805f_attributes_pwm_freq[i]); |
| if (err) |
| goto exit_remove_files; |
| } |
| /* If PWM is in manual mode, add write permission */ |
| if (data->fan_ctrl[i] & FAN_CTRL_MODE_MANUAL) { |
| err = sysfs_chmod_file(&pdev->dev.kobj, |
| f71805f_attr_pwm[i], |
| S_IRUGO | S_IWUSR); |
| if (err) { |
| dev_err(&pdev->dev, "chmod +w pwm%d failed\n", |
| i + 1); |
| goto exit_remove_files; |
| } |
| } |
| } |
| |
| data->hwmon_dev = hwmon_device_register(&pdev->dev); |
| if (IS_ERR(data->hwmon_dev)) { |
| err = PTR_ERR(data->hwmon_dev); |
| dev_err(&pdev->dev, "Class registration failed (%d)\n", err); |
| goto exit_remove_files; |
| } |
| |
| return 0; |
| |
| exit_remove_files: |
| sysfs_remove_group(&pdev->dev.kobj, &f71805f_group); |
| for (i = 0; i < 4; i++) |
| sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_optin[i]); |
| sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_pwm_freq); |
| return err; |
| } |
| |
| static int f71805f_remove(struct platform_device *pdev) |
| { |
| struct f71805f_data *data = platform_get_drvdata(pdev); |
| int i; |
| |
| hwmon_device_unregister(data->hwmon_dev); |
| sysfs_remove_group(&pdev->dev.kobj, &f71805f_group); |
| for (i = 0; i < 4; i++) |
| sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_optin[i]); |
| sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_pwm_freq); |
| |
| return 0; |
| } |
| |
| static struct platform_driver f71805f_driver = { |
| .driver = { |
| .name = DRVNAME, |
| }, |
| .probe = f71805f_probe, |
| .remove = f71805f_remove, |
| }; |
| |
| static int __init f71805f_device_add(unsigned short address, |
| const struct f71805f_sio_data *sio_data) |
| { |
| struct resource res = { |
| .start = address, |
| .end = address + REGION_LENGTH - 1, |
| .flags = IORESOURCE_IO, |
| }; |
| int err; |
| |
| pdev = platform_device_alloc(DRVNAME, address); |
| if (!pdev) { |
| err = -ENOMEM; |
| pr_err("Device allocation failed\n"); |
| goto exit; |
| } |
| |
| res.name = pdev->name; |
| err = acpi_check_resource_conflict(&res); |
| if (err) |
| goto exit_device_put; |
| |
| err = platform_device_add_resources(pdev, &res, 1); |
| if (err) { |
| pr_err("Device resource addition failed (%d)\n", err); |
| goto exit_device_put; |
| } |
| |
| err = platform_device_add_data(pdev, sio_data, |
| sizeof(struct f71805f_sio_data)); |
| if (err) { |
| pr_err("Platform data allocation failed\n"); |
| goto exit_device_put; |
| } |
| |
| err = platform_device_add(pdev); |
| if (err) { |
| pr_err("Device addition failed (%d)\n", err); |
| goto exit_device_put; |
| } |
| |
| return 0; |
| |
| exit_device_put: |
| platform_device_put(pdev); |
| exit: |
| return err; |
| } |
| |
| static int __init f71805f_find(int sioaddr, unsigned short *address, |
| struct f71805f_sio_data *sio_data) |
| { |
| int err; |
| u16 devid; |
| |
| static const char * const names[] = { |
| "F71805F/FG", |
| "F71872F/FG or F71806F/FG", |
| }; |
| |
| err = superio_enter(sioaddr); |
| if (err) |
| return err; |
| |
| err = -ENODEV; |
| devid = superio_inw(sioaddr, SIO_REG_MANID); |
| if (devid != SIO_FINTEK_ID) |
| goto exit; |
| |
| devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID); |
| switch (devid) { |
| case SIO_F71805F_ID: |
| sio_data->kind = f71805f; |
| break; |
| case SIO_F71872F_ID: |
| sio_data->kind = f71872f; |
| sio_data->fnsel1 = superio_inb(sioaddr, SIO_REG_FNSEL1); |
| break; |
| default: |
| pr_info("Unsupported Fintek device, skipping\n"); |
| goto exit; |
| } |
| |
| superio_select(sioaddr, F71805F_LD_HWM); |
| if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) { |
| pr_warn("Device not activated, skipping\n"); |
| goto exit; |
| } |
| |
| *address = superio_inw(sioaddr, SIO_REG_ADDR); |
| if (*address == 0) { |
| pr_warn("Base address not set, skipping\n"); |
| goto exit; |
| } |
| *address &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */ |
| |
| err = 0; |
| pr_info("Found %s chip at %#x, revision %u\n", |
| names[sio_data->kind], *address, |
| superio_inb(sioaddr, SIO_REG_DEVREV)); |
| |
| exit: |
| superio_exit(sioaddr); |
| return err; |
| } |
| |
| static int __init f71805f_init(void) |
| { |
| int err; |
| unsigned short address; |
| struct f71805f_sio_data sio_data; |
| |
| if (f71805f_find(0x2e, &address, &sio_data) |
| && f71805f_find(0x4e, &address, &sio_data)) |
| return -ENODEV; |
| |
| err = platform_driver_register(&f71805f_driver); |
| if (err) |
| goto exit; |
| |
| /* Sets global pdev as a side effect */ |
| err = f71805f_device_add(address, &sio_data); |
| if (err) |
| goto exit_driver; |
| |
| return 0; |
| |
| exit_driver: |
| platform_driver_unregister(&f71805f_driver); |
| exit: |
| return err; |
| } |
| |
| static void __exit f71805f_exit(void) |
| { |
| platform_device_unregister(pdev); |
| platform_driver_unregister(&f71805f_driver); |
| } |
| |
| MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("F71805F/F71872F hardware monitoring driver"); |
| |
| module_init(f71805f_init); |
| module_exit(f71805f_exit); |