| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * LED driver for Mediatek MT6323 PMIC |
| * |
| * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com> |
| */ |
| #include <linux/kernel.h> |
| #include <linux/leds.h> |
| #include <linux/mfd/mt6323/registers.h> |
| #include <linux/mfd/mt6397/core.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| |
| /* |
| * Register field for MT6323_TOP_CKPDN0 to enable |
| * 32K clock common for LED device. |
| */ |
| #define MT6323_RG_DRV_32K_CK_PDN BIT(11) |
| #define MT6323_RG_DRV_32K_CK_PDN_MASK BIT(11) |
| |
| /* |
| * Register field for MT6323_TOP_CKPDN2 to enable |
| * individual clock for LED device. |
| */ |
| #define MT6323_RG_ISINK_CK_PDN(i) BIT(i) |
| #define MT6323_RG_ISINK_CK_PDN_MASK(i) BIT(i) |
| |
| /* |
| * Register field for MT6323_TOP_CKCON1 to select |
| * clock source. |
| */ |
| #define MT6323_RG_ISINK_CK_SEL_MASK(i) (BIT(10) << (i)) |
| |
| /* |
| * Register for MT6323_ISINK_CON0 to setup the |
| * duty cycle of the blink. |
| */ |
| #define MT6323_ISINK_CON0(i) (MT6323_ISINK0_CON0 + 0x8 * (i)) |
| #define MT6323_ISINK_DIM_DUTY_MASK (0x1f << 8) |
| #define MT6323_ISINK_DIM_DUTY(i) (((i) << 8) & \ |
| MT6323_ISINK_DIM_DUTY_MASK) |
| |
| /* Register to setup the period of the blink. */ |
| #define MT6323_ISINK_CON1(i) (MT6323_ISINK0_CON1 + 0x8 * (i)) |
| #define MT6323_ISINK_DIM_FSEL_MASK (0xffff) |
| #define MT6323_ISINK_DIM_FSEL(i) ((i) & MT6323_ISINK_DIM_FSEL_MASK) |
| |
| /* Register to control the brightness. */ |
| #define MT6323_ISINK_CON2(i) (MT6323_ISINK0_CON2 + 0x8 * (i)) |
| #define MT6323_ISINK_CH_STEP_SHIFT 12 |
| #define MT6323_ISINK_CH_STEP_MASK (0x7 << 12) |
| #define MT6323_ISINK_CH_STEP(i) (((i) << 12) & \ |
| MT6323_ISINK_CH_STEP_MASK) |
| #define MT6323_ISINK_SFSTR0_TC_MASK (0x3 << 1) |
| #define MT6323_ISINK_SFSTR0_TC(i) (((i) << 1) & \ |
| MT6323_ISINK_SFSTR0_TC_MASK) |
| #define MT6323_ISINK_SFSTR0_EN_MASK BIT(0) |
| #define MT6323_ISINK_SFSTR0_EN BIT(0) |
| |
| /* Register to LED channel enablement. */ |
| #define MT6323_ISINK_CH_EN_MASK(i) BIT(i) |
| #define MT6323_ISINK_CH_EN(i) BIT(i) |
| |
| #define MT6323_MAX_PERIOD 10000 |
| #define MT6323_MAX_LEDS 4 |
| #define MT6323_MAX_BRIGHTNESS 6 |
| #define MT6323_UNIT_DUTY 3125 |
| #define MT6323_CAL_HW_DUTY(o, p) DIV_ROUND_CLOSEST((o) * 100000ul,\ |
| (p) * MT6323_UNIT_DUTY) |
| |
| struct mt6323_leds; |
| |
| /** |
| * struct mt6323_led - state container for the LED device |
| * @id: the identifier in MT6323 LED device |
| * @parent: the pointer to MT6323 LED controller |
| * @cdev: LED class device for this LED device |
| * @current_brightness: current state of the LED device |
| */ |
| struct mt6323_led { |
| int id; |
| struct mt6323_leds *parent; |
| struct led_classdev cdev; |
| enum led_brightness current_brightness; |
| }; |
| |
| /** |
| * struct mt6323_leds - state container for holding LED controller |
| * of the driver |
| * @dev: the device pointer |
| * @hw: the underlying hardware providing shared |
| * bus for the register operations |
| * @lock: the lock among process context |
| * @led: the array that contains the state of individual |
| * LED device |
| */ |
| struct mt6323_leds { |
| struct device *dev; |
| struct mt6397_chip *hw; |
| /* protect among process context */ |
| struct mutex lock; |
| struct mt6323_led *led[MT6323_MAX_LEDS]; |
| }; |
| |
| static int mt6323_led_hw_brightness(struct led_classdev *cdev, |
| enum led_brightness brightness) |
| { |
| struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev); |
| struct mt6323_leds *leds = led->parent; |
| struct regmap *regmap = leds->hw->regmap; |
| u32 con2_mask = 0, con2_val = 0; |
| int ret; |
| |
| /* |
| * Setup current output for the corresponding |
| * brightness level. |
| */ |
| con2_mask |= MT6323_ISINK_CH_STEP_MASK | |
| MT6323_ISINK_SFSTR0_TC_MASK | |
| MT6323_ISINK_SFSTR0_EN_MASK; |
| con2_val |= MT6323_ISINK_CH_STEP(brightness - 1) | |
| MT6323_ISINK_SFSTR0_TC(2) | |
| MT6323_ISINK_SFSTR0_EN; |
| |
| ret = regmap_update_bits(regmap, MT6323_ISINK_CON2(led->id), |
| con2_mask, con2_val); |
| return ret; |
| } |
| |
| static int mt6323_led_hw_off(struct led_classdev *cdev) |
| { |
| struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev); |
| struct mt6323_leds *leds = led->parent; |
| struct regmap *regmap = leds->hw->regmap; |
| unsigned int status; |
| int ret; |
| |
| status = MT6323_ISINK_CH_EN(led->id); |
| ret = regmap_update_bits(regmap, MT6323_ISINK_EN_CTRL, |
| MT6323_ISINK_CH_EN_MASK(led->id), ~status); |
| if (ret < 0) |
| return ret; |
| |
| usleep_range(100, 300); |
| ret = regmap_update_bits(regmap, MT6323_TOP_CKPDN2, |
| MT6323_RG_ISINK_CK_PDN_MASK(led->id), |
| MT6323_RG_ISINK_CK_PDN(led->id)); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static enum led_brightness |
| mt6323_get_led_hw_brightness(struct led_classdev *cdev) |
| { |
| struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev); |
| struct mt6323_leds *leds = led->parent; |
| struct regmap *regmap = leds->hw->regmap; |
| unsigned int status; |
| int ret; |
| |
| ret = regmap_read(regmap, MT6323_TOP_CKPDN2, &status); |
| if (ret < 0) |
| return ret; |
| |
| if (status & MT6323_RG_ISINK_CK_PDN_MASK(led->id)) |
| return 0; |
| |
| ret = regmap_read(regmap, MT6323_ISINK_EN_CTRL, &status); |
| if (ret < 0) |
| return ret; |
| |
| if (!(status & MT6323_ISINK_CH_EN(led->id))) |
| return 0; |
| |
| ret = regmap_read(regmap, MT6323_ISINK_CON2(led->id), &status); |
| if (ret < 0) |
| return ret; |
| |
| return ((status & MT6323_ISINK_CH_STEP_MASK) |
| >> MT6323_ISINK_CH_STEP_SHIFT) + 1; |
| } |
| |
| static int mt6323_led_hw_on(struct led_classdev *cdev, |
| enum led_brightness brightness) |
| { |
| struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev); |
| struct mt6323_leds *leds = led->parent; |
| struct regmap *regmap = leds->hw->regmap; |
| unsigned int status; |
| int ret; |
| |
| /* |
| * Setup required clock source, enable the corresponding |
| * clock and channel and let work with continuous blink as |
| * the default. |
| */ |
| ret = regmap_update_bits(regmap, MT6323_TOP_CKCON1, |
| MT6323_RG_ISINK_CK_SEL_MASK(led->id), 0); |
| if (ret < 0) |
| return ret; |
| |
| status = MT6323_RG_ISINK_CK_PDN(led->id); |
| ret = regmap_update_bits(regmap, MT6323_TOP_CKPDN2, |
| MT6323_RG_ISINK_CK_PDN_MASK(led->id), |
| ~status); |
| if (ret < 0) |
| return ret; |
| |
| usleep_range(100, 300); |
| |
| ret = regmap_update_bits(regmap, MT6323_ISINK_EN_CTRL, |
| MT6323_ISINK_CH_EN_MASK(led->id), |
| MT6323_ISINK_CH_EN(led->id)); |
| if (ret < 0) |
| return ret; |
| |
| ret = mt6323_led_hw_brightness(cdev, brightness); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_update_bits(regmap, MT6323_ISINK_CON0(led->id), |
| MT6323_ISINK_DIM_DUTY_MASK, |
| MT6323_ISINK_DIM_DUTY(31)); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_update_bits(regmap, MT6323_ISINK_CON1(led->id), |
| MT6323_ISINK_DIM_FSEL_MASK, |
| MT6323_ISINK_DIM_FSEL(1000)); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int mt6323_led_set_blink(struct led_classdev *cdev, |
| unsigned long *delay_on, |
| unsigned long *delay_off) |
| { |
| struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev); |
| struct mt6323_leds *leds = led->parent; |
| struct regmap *regmap = leds->hw->regmap; |
| unsigned long period; |
| u8 duty_hw; |
| int ret; |
| |
| /* |
| * LED subsystem requires a default user |
| * friendly blink pattern for the LED so using |
| * 1Hz duty cycle 50% here if without specific |
| * value delay_on and delay off being assigned. |
| */ |
| if (!*delay_on && !*delay_off) { |
| *delay_on = 500; |
| *delay_off = 500; |
| } |
| |
| /* |
| * Units are in ms, if over the hardware able |
| * to support, fallback into software blink |
| */ |
| period = *delay_on + *delay_off; |
| |
| if (period > MT6323_MAX_PERIOD) |
| return -EINVAL; |
| |
| /* |
| * Calculate duty_hw based on the percentage of period during |
| * which the led is ON. |
| */ |
| duty_hw = MT6323_CAL_HW_DUTY(*delay_on, period); |
| |
| /* hardware doesn't support zero duty cycle. */ |
| if (!duty_hw) |
| return -EINVAL; |
| |
| mutex_lock(&leds->lock); |
| /* |
| * Set max_brightness as the software blink behavior |
| * when no blink brightness. |
| */ |
| if (!led->current_brightness) { |
| ret = mt6323_led_hw_on(cdev, cdev->max_brightness); |
| if (ret < 0) |
| goto out; |
| led->current_brightness = cdev->max_brightness; |
| } |
| |
| ret = regmap_update_bits(regmap, MT6323_ISINK_CON0(led->id), |
| MT6323_ISINK_DIM_DUTY_MASK, |
| MT6323_ISINK_DIM_DUTY(duty_hw - 1)); |
| if (ret < 0) |
| goto out; |
| |
| ret = regmap_update_bits(regmap, MT6323_ISINK_CON1(led->id), |
| MT6323_ISINK_DIM_FSEL_MASK, |
| MT6323_ISINK_DIM_FSEL(period - 1)); |
| out: |
| mutex_unlock(&leds->lock); |
| |
| return ret; |
| } |
| |
| static int mt6323_led_set_brightness(struct led_classdev *cdev, |
| enum led_brightness brightness) |
| { |
| struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev); |
| struct mt6323_leds *leds = led->parent; |
| int ret; |
| |
| mutex_lock(&leds->lock); |
| |
| if (!led->current_brightness && brightness) { |
| ret = mt6323_led_hw_on(cdev, brightness); |
| if (ret < 0) |
| goto out; |
| } else if (brightness) { |
| ret = mt6323_led_hw_brightness(cdev, brightness); |
| if (ret < 0) |
| goto out; |
| } else { |
| ret = mt6323_led_hw_off(cdev); |
| if (ret < 0) |
| goto out; |
| } |
| |
| led->current_brightness = brightness; |
| out: |
| mutex_unlock(&leds->lock); |
| |
| return ret; |
| } |
| |
| static int mt6323_led_set_dt_default(struct led_classdev *cdev, |
| struct device_node *np) |
| { |
| struct mt6323_led *led = container_of(cdev, struct mt6323_led, cdev); |
| const char *state; |
| int ret = 0; |
| |
| state = of_get_property(np, "default-state", NULL); |
| if (state) { |
| if (!strcmp(state, "keep")) { |
| ret = mt6323_get_led_hw_brightness(cdev); |
| if (ret < 0) |
| return ret; |
| led->current_brightness = ret; |
| ret = 0; |
| } else if (!strcmp(state, "on")) { |
| ret = |
| mt6323_led_set_brightness(cdev, cdev->max_brightness); |
| } else { |
| ret = mt6323_led_set_brightness(cdev, LED_OFF); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int mt6323_led_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev_of_node(dev); |
| struct device_node *child; |
| struct mt6397_chip *hw = dev_get_drvdata(dev->parent); |
| struct mt6323_leds *leds; |
| struct mt6323_led *led; |
| int ret; |
| unsigned int status; |
| u32 reg; |
| |
| leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL); |
| if (!leds) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, leds); |
| leds->dev = dev; |
| |
| /* |
| * leds->hw points to the underlying bus for the register |
| * controlled. |
| */ |
| leds->hw = hw; |
| mutex_init(&leds->lock); |
| |
| status = MT6323_RG_DRV_32K_CK_PDN; |
| ret = regmap_update_bits(leds->hw->regmap, MT6323_TOP_CKPDN0, |
| MT6323_RG_DRV_32K_CK_PDN_MASK, ~status); |
| if (ret < 0) { |
| dev_err(leds->dev, |
| "Failed to update MT6323_TOP_CKPDN0 Register\n"); |
| return ret; |
| } |
| |
| for_each_available_child_of_node(np, child) { |
| struct led_init_data init_data = {}; |
| |
| ret = of_property_read_u32(child, "reg", ®); |
| if (ret) { |
| dev_err(dev, "Failed to read led 'reg' property\n"); |
| goto put_child_node; |
| } |
| |
| if (reg >= MT6323_MAX_LEDS || leds->led[reg]) { |
| dev_err(dev, "Invalid led reg %u\n", reg); |
| ret = -EINVAL; |
| goto put_child_node; |
| } |
| |
| led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL); |
| if (!led) { |
| ret = -ENOMEM; |
| goto put_child_node; |
| } |
| |
| leds->led[reg] = led; |
| leds->led[reg]->id = reg; |
| leds->led[reg]->cdev.max_brightness = MT6323_MAX_BRIGHTNESS; |
| leds->led[reg]->cdev.brightness_set_blocking = |
| mt6323_led_set_brightness; |
| leds->led[reg]->cdev.blink_set = mt6323_led_set_blink; |
| leds->led[reg]->cdev.brightness_get = |
| mt6323_get_led_hw_brightness; |
| leds->led[reg]->parent = leds; |
| |
| ret = mt6323_led_set_dt_default(&leds->led[reg]->cdev, child); |
| if (ret < 0) { |
| dev_err(leds->dev, |
| "Failed to LED set default from devicetree\n"); |
| goto put_child_node; |
| } |
| |
| init_data.fwnode = of_fwnode_handle(child); |
| |
| ret = devm_led_classdev_register_ext(dev, &leds->led[reg]->cdev, |
| &init_data); |
| if (ret) { |
| dev_err(dev, "Failed to register LED: %d\n", ret); |
| goto put_child_node; |
| } |
| } |
| |
| return 0; |
| |
| put_child_node: |
| of_node_put(child); |
| return ret; |
| } |
| |
| static int mt6323_led_remove(struct platform_device *pdev) |
| { |
| struct mt6323_leds *leds = platform_get_drvdata(pdev); |
| int i; |
| |
| /* Turn the LEDs off on driver removal. */ |
| for (i = 0 ; leds->led[i] ; i++) |
| mt6323_led_hw_off(&leds->led[i]->cdev); |
| |
| regmap_update_bits(leds->hw->regmap, MT6323_TOP_CKPDN0, |
| MT6323_RG_DRV_32K_CK_PDN_MASK, |
| MT6323_RG_DRV_32K_CK_PDN); |
| |
| mutex_destroy(&leds->lock); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id mt6323_led_dt_match[] = { |
| { .compatible = "mediatek,mt6323-led" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, mt6323_led_dt_match); |
| |
| static struct platform_driver mt6323_led_driver = { |
| .probe = mt6323_led_probe, |
| .remove = mt6323_led_remove, |
| .driver = { |
| .name = "mt6323-led", |
| .of_match_table = mt6323_led_dt_match, |
| }, |
| }; |
| |
| module_platform_driver(mt6323_led_driver); |
| |
| MODULE_DESCRIPTION("LED driver for Mediatek MT6323 PMIC"); |
| MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>"); |
| MODULE_LICENSE("GPL"); |