blob: 85208128f135ca48fb504a812483d69bd095a386 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright Altera Corporation (C) 2014. All rights reserved.
*
* Adopted from dwmac-sti.c
*/
#include <linux/mfd/altera-sysmgr.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_net.h>
#include <linux/phy.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/stmmac.h>
#include "stmmac.h"
#include "stmmac_platform.h"
#include "altr_tse_pcs.h"
#define SGMII_ADAPTER_CTRL_REG 0x00
#define SGMII_ADAPTER_DISABLE 0x0001
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2
#define SYSMGR_EMACGRP_CTRL_PHYSEL_WIDTH 2
#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x00000003
#define SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK 0x00000010
#define SYSMGR_GEN10_EMACGRP_CTRL_PTP_REF_CLK_MASK 0x00000100
#define SYSMGR_FPGAGRP_MODULE_REG 0x00000028
#define SYSMGR_FPGAGRP_MODULE_EMAC 0x00000004
#define SYSMGR_FPGAINTF_EMAC_REG 0x00000070
#define SYSMGR_FPGAINTF_EMAC_BIT 0x1
#define EMAC_SPLITTER_CTRL_REG 0x0
#define EMAC_SPLITTER_CTRL_SPEED_MASK 0x3
#define EMAC_SPLITTER_CTRL_SPEED_10 0x2
#define EMAC_SPLITTER_CTRL_SPEED_100 0x3
#define EMAC_SPLITTER_CTRL_SPEED_1000 0x0
struct socfpga_dwmac;
struct socfpga_dwmac_ops {
int (*set_phy_mode)(struct socfpga_dwmac *dwmac_priv);
};
struct socfpga_dwmac {
u32 reg_offset;
u32 reg_shift;
struct device *dev;
struct regmap *sys_mgr_base_addr;
struct reset_control *stmmac_rst;
struct reset_control *stmmac_ocp_rst;
void __iomem *splitter_base;
bool f2h_ptp_ref_clk;
struct tse_pcs pcs;
const struct socfpga_dwmac_ops *ops;
};
static void socfpga_dwmac_fix_mac_speed(void *priv, unsigned int speed)
{
struct socfpga_dwmac *dwmac = (struct socfpga_dwmac *)priv;
void __iomem *splitter_base = dwmac->splitter_base;
void __iomem *tse_pcs_base = dwmac->pcs.tse_pcs_base;
void __iomem *sgmii_adapter_base = dwmac->pcs.sgmii_adapter_base;
struct device *dev = dwmac->dev;
struct net_device *ndev = dev_get_drvdata(dev);
struct phy_device *phy_dev = ndev->phydev;
u32 val;
if ((tse_pcs_base) && (sgmii_adapter_base))
writew(SGMII_ADAPTER_DISABLE,
sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
if (splitter_base) {
val = readl(splitter_base + EMAC_SPLITTER_CTRL_REG);
val &= ~EMAC_SPLITTER_CTRL_SPEED_MASK;
switch (speed) {
case 1000:
val |= EMAC_SPLITTER_CTRL_SPEED_1000;
break;
case 100:
val |= EMAC_SPLITTER_CTRL_SPEED_100;
break;
case 10:
val |= EMAC_SPLITTER_CTRL_SPEED_10;
break;
default:
return;
}
writel(val, splitter_base + EMAC_SPLITTER_CTRL_REG);
}
if (tse_pcs_base && sgmii_adapter_base)
tse_pcs_fix_mac_speed(&dwmac->pcs, phy_dev, speed);
}
static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev)
{
struct device_node *np = dev->of_node;
struct regmap *sys_mgr_base_addr;
u32 reg_offset, reg_shift;
int ret, index;
struct device_node *np_splitter = NULL;
struct device_node *np_sgmii_adapter = NULL;
struct resource res_splitter;
struct resource res_tse_pcs;
struct resource res_sgmii_adapter;
sys_mgr_base_addr =
altr_sysmgr_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon");
if (IS_ERR(sys_mgr_base_addr)) {
dev_info(dev, "No sysmgr-syscon node found\n");
return PTR_ERR(sys_mgr_base_addr);
}
ret = of_property_read_u32_index(np, "altr,sysmgr-syscon", 1, &reg_offset);
if (ret) {
dev_info(dev, "Could not read reg_offset from sysmgr-syscon!\n");
return -EINVAL;
}
ret = of_property_read_u32_index(np, "altr,sysmgr-syscon", 2, &reg_shift);
if (ret) {
dev_info(dev, "Could not read reg_shift from sysmgr-syscon!\n");
return -EINVAL;
}
dwmac->f2h_ptp_ref_clk = of_property_read_bool(np, "altr,f2h_ptp_ref_clk");
np_splitter = of_parse_phandle(np, "altr,emac-splitter", 0);
if (np_splitter) {
ret = of_address_to_resource(np_splitter, 0, &res_splitter);
of_node_put(np_splitter);
if (ret) {
dev_info(dev, "Missing emac splitter address\n");
return -EINVAL;
}
dwmac->splitter_base = devm_ioremap_resource(dev, &res_splitter);
if (IS_ERR(dwmac->splitter_base)) {
dev_info(dev, "Failed to mapping emac splitter\n");
return PTR_ERR(dwmac->splitter_base);
}
}
np_sgmii_adapter = of_parse_phandle(np,
"altr,gmii-to-sgmii-converter", 0);
if (np_sgmii_adapter) {
index = of_property_match_string(np_sgmii_adapter, "reg-names",
"hps_emac_interface_splitter_avalon_slave");
if (index >= 0) {
if (of_address_to_resource(np_sgmii_adapter, index,
&res_splitter)) {
dev_err(dev,
"%s: ERROR: missing emac splitter address\n",
__func__);
ret = -EINVAL;
goto err_node_put;
}
dwmac->splitter_base =
devm_ioremap_resource(dev, &res_splitter);
if (IS_ERR(dwmac->splitter_base)) {
ret = PTR_ERR(dwmac->splitter_base);
goto err_node_put;
}
}
index = of_property_match_string(np_sgmii_adapter, "reg-names",
"gmii_to_sgmii_adapter_avalon_slave");
if (index >= 0) {
if (of_address_to_resource(np_sgmii_adapter, index,
&res_sgmii_adapter)) {
dev_err(dev,
"%s: ERROR: failed mapping adapter\n",
__func__);
ret = -EINVAL;
goto err_node_put;
}
dwmac->pcs.sgmii_adapter_base =
devm_ioremap_resource(dev, &res_sgmii_adapter);
if (IS_ERR(dwmac->pcs.sgmii_adapter_base)) {
ret = PTR_ERR(dwmac->pcs.sgmii_adapter_base);
goto err_node_put;
}
}
index = of_property_match_string(np_sgmii_adapter, "reg-names",
"eth_tse_control_port");
if (index >= 0) {
if (of_address_to_resource(np_sgmii_adapter, index,
&res_tse_pcs)) {
dev_err(dev,
"%s: ERROR: failed mapping tse control port\n",
__func__);
ret = -EINVAL;
goto err_node_put;
}
dwmac->pcs.tse_pcs_base =
devm_ioremap_resource(dev, &res_tse_pcs);
if (IS_ERR(dwmac->pcs.tse_pcs_base)) {
ret = PTR_ERR(dwmac->pcs.tse_pcs_base);
goto err_node_put;
}
}
}
dwmac->reg_offset = reg_offset;
dwmac->reg_shift = reg_shift;
dwmac->sys_mgr_base_addr = sys_mgr_base_addr;
dwmac->dev = dev;
of_node_put(np_sgmii_adapter);
return 0;
err_node_put:
of_node_put(np_sgmii_adapter);
return ret;
}
static int socfpga_get_plat_phymode(struct socfpga_dwmac *dwmac)
{
struct net_device *ndev = dev_get_drvdata(dwmac->dev);
struct stmmac_priv *priv = netdev_priv(ndev);
return priv->plat->interface;
}
static int socfpga_set_phy_mode_common(int phymode, u32 *val)
{
switch (phymode) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
*val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
break;
case PHY_INTERFACE_MODE_MII:
case PHY_INTERFACE_MODE_GMII:
case PHY_INTERFACE_MODE_SGMII:
*val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
break;
case PHY_INTERFACE_MODE_RMII:
*val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII;
break;
default:
return -EINVAL;
}
return 0;
}
static int socfpga_gen5_set_phy_mode(struct socfpga_dwmac *dwmac)
{
struct regmap *sys_mgr_base_addr = dwmac->sys_mgr_base_addr;
int phymode = socfpga_get_plat_phymode(dwmac);
u32 reg_offset = dwmac->reg_offset;
u32 reg_shift = dwmac->reg_shift;
u32 ctrl, val, module;
if (socfpga_set_phy_mode_common(phymode, &val)) {
dev_err(dwmac->dev, "bad phy mode %d\n", phymode);
return -EINVAL;
}
/* Overwrite val to GMII if splitter core is enabled. The phymode here
* is the actual phy mode on phy hardware, but phy interface from
* EMAC core is GMII.
*/
if (dwmac->splitter_base)
val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
/* Assert reset to the enet controller before changing the phy mode */
reset_control_assert(dwmac->stmmac_ocp_rst);
reset_control_assert(dwmac->stmmac_rst);
regmap_read(sys_mgr_base_addr, reg_offset, &ctrl);
ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift);
ctrl |= val << reg_shift;
if (dwmac->f2h_ptp_ref_clk ||
phymode == PHY_INTERFACE_MODE_MII ||
phymode == PHY_INTERFACE_MODE_GMII ||
phymode == PHY_INTERFACE_MODE_SGMII) {
regmap_read(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
&module);
module |= (SYSMGR_FPGAGRP_MODULE_EMAC << (reg_shift / 2));
regmap_write(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
module);
}
if (dwmac->f2h_ptp_ref_clk)
ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
else
ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK <<
(reg_shift / 2));
regmap_write(sys_mgr_base_addr, reg_offset, ctrl);
/* Deassert reset for the phy configuration to be sampled by
* the enet controller, and operation to start in requested mode
*/
reset_control_deassert(dwmac->stmmac_ocp_rst);
reset_control_deassert(dwmac->stmmac_rst);
if (phymode == PHY_INTERFACE_MODE_SGMII) {
if (tse_pcs_init(dwmac->pcs.tse_pcs_base, &dwmac->pcs) != 0) {
dev_err(dwmac->dev, "Unable to initialize TSE PCS");
return -EINVAL;
}
}
return 0;
}
static int socfpga_gen10_set_phy_mode(struct socfpga_dwmac *dwmac)
{
struct regmap *sys_mgr_base_addr = dwmac->sys_mgr_base_addr;
int phymode = socfpga_get_plat_phymode(dwmac);
u32 reg_offset = dwmac->reg_offset;
u32 reg_shift = dwmac->reg_shift;
u32 ctrl, val, module;
if (socfpga_set_phy_mode_common(phymode, &val))
return -EINVAL;
/* Overwrite val to GMII if splitter core is enabled. The phymode here
* is the actual phy mode on phy hardware, but phy interface from
* EMAC core is GMII.
*/
if (dwmac->splitter_base)
val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
/* Assert reset to the enet controller before changing the phy mode */
reset_control_assert(dwmac->stmmac_ocp_rst);
reset_control_assert(dwmac->stmmac_rst);
regmap_read(sys_mgr_base_addr, reg_offset, &ctrl);
ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK);
ctrl |= val;
if (dwmac->f2h_ptp_ref_clk ||
phymode == PHY_INTERFACE_MODE_MII ||
phymode == PHY_INTERFACE_MODE_GMII ||
phymode == PHY_INTERFACE_MODE_SGMII) {
ctrl |= SYSMGR_GEN10_EMACGRP_CTRL_PTP_REF_CLK_MASK;
regmap_read(sys_mgr_base_addr, SYSMGR_FPGAINTF_EMAC_REG,
&module);
module |= (SYSMGR_FPGAINTF_EMAC_BIT << reg_shift);
regmap_write(sys_mgr_base_addr, SYSMGR_FPGAINTF_EMAC_REG,
module);
} else {
ctrl &= ~SYSMGR_GEN10_EMACGRP_CTRL_PTP_REF_CLK_MASK;
}
regmap_write(sys_mgr_base_addr, reg_offset, ctrl);
/* Deassert reset for the phy configuration to be sampled by
* the enet controller, and operation to start in requested mode
*/
reset_control_deassert(dwmac->stmmac_ocp_rst);
reset_control_deassert(dwmac->stmmac_rst);
if (phymode == PHY_INTERFACE_MODE_SGMII) {
if (tse_pcs_init(dwmac->pcs.tse_pcs_base, &dwmac->pcs) != 0) {
dev_err(dwmac->dev, "Unable to initialize TSE PCS");
return -EINVAL;
}
}
return 0;
}
static int socfpga_dwmac_probe(struct platform_device *pdev)
{
struct plat_stmmacenet_data *plat_dat;
struct stmmac_resources stmmac_res;
struct device *dev = &pdev->dev;
int ret;
struct socfpga_dwmac *dwmac;
struct net_device *ndev;
struct stmmac_priv *stpriv;
const struct socfpga_dwmac_ops *ops;
ops = device_get_match_data(&pdev->dev);
if (!ops) {
dev_err(&pdev->dev, "no of match data provided\n");
return -EINVAL;
}
ret = stmmac_get_platform_resources(pdev, &stmmac_res);
if (ret)
return ret;
plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
if (IS_ERR(plat_dat))
return PTR_ERR(plat_dat);
dwmac = devm_kzalloc(dev, sizeof(*dwmac), GFP_KERNEL);
if (!dwmac) {
ret = -ENOMEM;
goto err_remove_config_dt;
}
dwmac->stmmac_ocp_rst = devm_reset_control_get_optional(dev, "stmmaceth-ocp");
if (IS_ERR(dwmac->stmmac_ocp_rst)) {
ret = PTR_ERR(dwmac->stmmac_ocp_rst);
dev_err(dev, "error getting reset control of ocp %d\n", ret);
goto err_remove_config_dt;
}
reset_control_deassert(dwmac->stmmac_ocp_rst);
ret = socfpga_dwmac_parse_data(dwmac, dev);
if (ret) {
dev_err(dev, "Unable to parse OF data\n");
goto err_remove_config_dt;
}
dwmac->ops = ops;
plat_dat->bsp_priv = dwmac;
plat_dat->fix_mac_speed = socfpga_dwmac_fix_mac_speed;
ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
if (ret)
goto err_remove_config_dt;
ndev = platform_get_drvdata(pdev);
stpriv = netdev_priv(ndev);
/* The socfpga driver needs to control the stmmac reset to set the phy
* mode. Create a copy of the core reset handle so it can be used by
* the driver later.
*/
dwmac->stmmac_rst = stpriv->plat->stmmac_rst;
ret = ops->set_phy_mode(dwmac);
if (ret)
goto err_dvr_remove;
return 0;
err_dvr_remove:
stmmac_dvr_remove(&pdev->dev);
err_remove_config_dt:
stmmac_remove_config_dt(pdev, plat_dat);
return ret;
}
#ifdef CONFIG_PM_SLEEP
static int socfpga_dwmac_resume(struct device *dev)
{
struct net_device *ndev = dev_get_drvdata(dev);
struct stmmac_priv *priv = netdev_priv(ndev);
struct socfpga_dwmac *dwmac_priv = get_stmmac_bsp_priv(dev);
dwmac_priv->ops->set_phy_mode(priv->plat->bsp_priv);
/* Before the enet controller is suspended, the phy is suspended.
* This causes the phy clock to be gated. The enet controller is
* resumed before the phy, so the clock is still gated "off" when
* the enet controller is resumed. This code makes sure the phy
* is "resumed" before reinitializing the enet controller since
* the enet controller depends on an active phy clock to complete
* a DMA reset. A DMA reset will "time out" if executed
* with no phy clock input on the Synopsys enet controller.
* Verified through Synopsys Case #8000711656.
*
* Note that the phy clock is also gated when the phy is isolated.
* Phy "suspend" and "isolate" controls are located in phy basic
* control register 0, and can be modified by the phy driver
* framework.
*/
if (ndev->phydev)
phy_resume(ndev->phydev);
return stmmac_resume(dev);
}
#endif /* CONFIG_PM_SLEEP */
static SIMPLE_DEV_PM_OPS(socfpga_dwmac_pm_ops, stmmac_suspend,
socfpga_dwmac_resume);
static const struct socfpga_dwmac_ops socfpga_gen5_ops = {
.set_phy_mode = socfpga_gen5_set_phy_mode,
};
static const struct socfpga_dwmac_ops socfpga_gen10_ops = {
.set_phy_mode = socfpga_gen10_set_phy_mode,
};
static const struct of_device_id socfpga_dwmac_match[] = {
{ .compatible = "altr,socfpga-stmmac", .data = &socfpga_gen5_ops },
{ .compatible = "altr,socfpga-stmmac-a10-s10", .data = &socfpga_gen10_ops },
{ }
};
MODULE_DEVICE_TABLE(of, socfpga_dwmac_match);
static struct platform_driver socfpga_dwmac_driver = {
.probe = socfpga_dwmac_probe,
.remove = stmmac_pltfr_remove,
.driver = {
.name = "socfpga-dwmac",
.pm = &socfpga_dwmac_pm_ops,
.of_match_table = socfpga_dwmac_match,
},
};
module_platform_driver(socfpga_dwmac_driver);
MODULE_LICENSE("GPL v2");