| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2020-21 Intel Corporation. |
| */ |
| |
| #include <linux/delay.h> |
| |
| #include "iosm_ipc_chnl_cfg.h" |
| #include "iosm_ipc_devlink.h" |
| #include "iosm_ipc_imem.h" |
| #include "iosm_ipc_imem_ops.h" |
| #include "iosm_ipc_port.h" |
| #include "iosm_ipc_task_queue.h" |
| |
| /* Open a packet data online channel between the network layer and CP. */ |
| int ipc_imem_sys_wwan_open(struct iosm_imem *ipc_imem, int if_id) |
| { |
| dev_dbg(ipc_imem->dev, "%s if id: %d", |
| ipc_imem_phase_get_string(ipc_imem->phase), if_id); |
| |
| /* The network interface is only supported in the runtime phase. */ |
| if (ipc_imem_phase_update(ipc_imem) != IPC_P_RUN) { |
| dev_err(ipc_imem->dev, "net:%d : refused phase %s", if_id, |
| ipc_imem_phase_get_string(ipc_imem->phase)); |
| return -EIO; |
| } |
| |
| return ipc_mux_open_session(ipc_imem->mux, if_id); |
| } |
| |
| /* Release a net link to CP. */ |
| void ipc_imem_sys_wwan_close(struct iosm_imem *ipc_imem, int if_id, |
| int channel_id) |
| { |
| if (ipc_imem->mux && if_id >= IP_MUX_SESSION_START && |
| if_id <= IP_MUX_SESSION_END) |
| ipc_mux_close_session(ipc_imem->mux, if_id); |
| } |
| |
| /* Tasklet call to do uplink transfer. */ |
| static int ipc_imem_tq_cdev_write(struct iosm_imem *ipc_imem, int arg, |
| void *msg, size_t size) |
| { |
| ipc_imem->ev_cdev_write_pending = false; |
| ipc_imem_ul_send(ipc_imem); |
| |
| return 0; |
| } |
| |
| /* Through tasklet to do sio write. */ |
| static int ipc_imem_call_cdev_write(struct iosm_imem *ipc_imem) |
| { |
| if (ipc_imem->ev_cdev_write_pending) |
| return -1; |
| |
| ipc_imem->ev_cdev_write_pending = true; |
| |
| return ipc_task_queue_send_task(ipc_imem, ipc_imem_tq_cdev_write, 0, |
| NULL, 0, false); |
| } |
| |
| /* Function for transfer UL data */ |
| int ipc_imem_sys_wwan_transmit(struct iosm_imem *ipc_imem, |
| int if_id, int channel_id, struct sk_buff *skb) |
| { |
| int ret = -EINVAL; |
| |
| if (!ipc_imem || channel_id < 0) |
| goto out; |
| |
| /* Is CP Running? */ |
| if (ipc_imem->phase != IPC_P_RUN) { |
| dev_dbg(ipc_imem->dev, "phase %s transmit", |
| ipc_imem_phase_get_string(ipc_imem->phase)); |
| ret = -EIO; |
| goto out; |
| } |
| |
| /* Route the UL packet through IP MUX Layer */ |
| ret = ipc_mux_ul_trigger_encode(ipc_imem->mux, if_id, skb); |
| out: |
| return ret; |
| } |
| |
| /* Initialize wwan channel */ |
| void ipc_imem_wwan_channel_init(struct iosm_imem *ipc_imem, |
| enum ipc_mux_protocol mux_type) |
| { |
| struct ipc_chnl_cfg chnl_cfg = { 0 }; |
| |
| ipc_imem->cp_version = ipc_mmio_get_cp_version(ipc_imem->mmio); |
| |
| /* If modem version is invalid (0xffffffff), do not initialize WWAN. */ |
| if (ipc_imem->cp_version == -1) { |
| dev_err(ipc_imem->dev, "invalid CP version"); |
| return; |
| } |
| |
| ipc_chnl_cfg_get(&chnl_cfg, ipc_imem->nr_of_channels); |
| ipc_imem_channel_init(ipc_imem, IPC_CTYPE_WWAN, chnl_cfg, |
| IRQ_MOD_OFF); |
| |
| /* WWAN registration. */ |
| ipc_imem->wwan = ipc_wwan_init(ipc_imem, ipc_imem->dev); |
| if (!ipc_imem->wwan) |
| dev_err(ipc_imem->dev, |
| "failed to register the ipc_wwan interfaces"); |
| } |
| |
| /* Map SKB to DMA for transfer */ |
| static int ipc_imem_map_skb_to_dma(struct iosm_imem *ipc_imem, |
| struct sk_buff *skb) |
| { |
| struct iosm_pcie *ipc_pcie = ipc_imem->pcie; |
| char *buf = skb->data; |
| int len = skb->len; |
| dma_addr_t mapping; |
| int ret; |
| |
| ret = ipc_pcie_addr_map(ipc_pcie, buf, len, &mapping, DMA_TO_DEVICE); |
| |
| if (ret) |
| goto err; |
| |
| BUILD_BUG_ON(sizeof(*IPC_CB(skb)) > sizeof(skb->cb)); |
| |
| IPC_CB(skb)->mapping = mapping; |
| IPC_CB(skb)->direction = DMA_TO_DEVICE; |
| IPC_CB(skb)->len = len; |
| IPC_CB(skb)->op_type = (u8)UL_DEFAULT; |
| |
| err: |
| return ret; |
| } |
| |
| /* return true if channel is ready for use */ |
| static bool ipc_imem_is_channel_active(struct iosm_imem *ipc_imem, |
| struct ipc_mem_channel *channel) |
| { |
| enum ipc_phase phase; |
| |
| /* Update the current operation phase. */ |
| phase = ipc_imem->phase; |
| |
| /* Select the operation depending on the execution stage. */ |
| switch (phase) { |
| case IPC_P_RUN: |
| case IPC_P_PSI: |
| case IPC_P_EBL: |
| break; |
| |
| case IPC_P_ROM: |
| /* Prepare the PSI image for the CP ROM driver and |
| * suspend the flash app. |
| */ |
| if (channel->state != IMEM_CHANNEL_RESERVED) { |
| dev_err(ipc_imem->dev, |
| "ch[%d]:invalid channel state %d,expected %d", |
| channel->channel_id, channel->state, |
| IMEM_CHANNEL_RESERVED); |
| goto channel_unavailable; |
| } |
| goto channel_available; |
| |
| default: |
| /* Ignore uplink actions in all other phases. */ |
| dev_err(ipc_imem->dev, "ch[%d]: confused phase %d", |
| channel->channel_id, phase); |
| goto channel_unavailable; |
| } |
| /* Check the full availability of the channel. */ |
| if (channel->state != IMEM_CHANNEL_ACTIVE) { |
| dev_err(ipc_imem->dev, "ch[%d]: confused channel state %d", |
| channel->channel_id, channel->state); |
| goto channel_unavailable; |
| } |
| |
| channel_available: |
| return true; |
| |
| channel_unavailable: |
| return false; |
| } |
| |
| /* Release a sio link to CP. */ |
| void ipc_imem_sys_cdev_close(struct iosm_cdev *ipc_cdev) |
| { |
| struct iosm_imem *ipc_imem = ipc_cdev->ipc_imem; |
| struct ipc_mem_channel *channel = ipc_cdev->channel; |
| enum ipc_phase curr_phase; |
| int status = 0; |
| u32 tail = 0; |
| |
| curr_phase = ipc_imem->phase; |
| |
| /* If current phase is IPC_P_OFF or SIO ID is -ve then |
| * channel is already freed. Nothing to do. |
| */ |
| if (curr_phase == IPC_P_OFF) { |
| dev_err(ipc_imem->dev, |
| "nothing to do. Current Phase: %s", |
| ipc_imem_phase_get_string(curr_phase)); |
| return; |
| } |
| |
| if (channel->state == IMEM_CHANNEL_FREE) { |
| dev_err(ipc_imem->dev, "ch[%d]: invalid channel state %d", |
| channel->channel_id, channel->state); |
| return; |
| } |
| |
| /* If there are any pending TDs then wait for Timeout/Completion before |
| * closing pipe. |
| */ |
| if (channel->ul_pipe.old_tail != channel->ul_pipe.old_head) { |
| ipc_imem->app_notify_ul_pend = 1; |
| |
| /* Suspend the user app and wait a certain time for processing |
| * UL Data. |
| */ |
| status = wait_for_completion_interruptible_timeout |
| (&ipc_imem->ul_pend_sem, |
| msecs_to_jiffies(IPC_PEND_DATA_TIMEOUT)); |
| if (status == 0) { |
| dev_dbg(ipc_imem->dev, |
| "Pend data Timeout UL-Pipe:%d Head:%d Tail:%d", |
| channel->ul_pipe.pipe_nr, |
| channel->ul_pipe.old_head, |
| channel->ul_pipe.old_tail); |
| } |
| |
| ipc_imem->app_notify_ul_pend = 0; |
| } |
| |
| /* If there are any pending TDs then wait for Timeout/Completion before |
| * closing pipe. |
| */ |
| ipc_protocol_get_head_tail_index(ipc_imem->ipc_protocol, |
| &channel->dl_pipe, NULL, &tail); |
| |
| if (tail != channel->dl_pipe.old_tail) { |
| ipc_imem->app_notify_dl_pend = 1; |
| |
| /* Suspend the user app and wait a certain time for processing |
| * DL Data. |
| */ |
| status = wait_for_completion_interruptible_timeout |
| (&ipc_imem->dl_pend_sem, |
| msecs_to_jiffies(IPC_PEND_DATA_TIMEOUT)); |
| if (status == 0) { |
| dev_dbg(ipc_imem->dev, |
| "Pend data Timeout DL-Pipe:%d Head:%d Tail:%d", |
| channel->dl_pipe.pipe_nr, |
| channel->dl_pipe.old_head, |
| channel->dl_pipe.old_tail); |
| } |
| |
| ipc_imem->app_notify_dl_pend = 0; |
| } |
| |
| /* Due to wait for completion in messages, there is a small window |
| * between closing the pipe and updating the channel is closed. In this |
| * small window there could be HP update from Host Driver. Hence update |
| * the channel state as CLOSING to aviod unnecessary interrupt |
| * towards CP. |
| */ |
| channel->state = IMEM_CHANNEL_CLOSING; |
| |
| ipc_imem_pipe_close(ipc_imem, &channel->ul_pipe); |
| ipc_imem_pipe_close(ipc_imem, &channel->dl_pipe); |
| |
| ipc_imem_channel_free(channel); |
| } |
| |
| /* Open a PORT link to CP and return the channel */ |
| struct ipc_mem_channel *ipc_imem_sys_port_open(struct iosm_imem *ipc_imem, |
| int chl_id, int hp_id) |
| { |
| struct ipc_mem_channel *channel; |
| int ch_id; |
| |
| /* The PORT interface is only supported in the runtime phase. */ |
| if (ipc_imem_phase_update(ipc_imem) != IPC_P_RUN) { |
| dev_err(ipc_imem->dev, "PORT open refused, phase %s", |
| ipc_imem_phase_get_string(ipc_imem->phase)); |
| return NULL; |
| } |
| |
| ch_id = ipc_imem_channel_alloc(ipc_imem, chl_id, IPC_CTYPE_CTRL); |
| |
| if (ch_id < 0) { |
| dev_err(ipc_imem->dev, "reservation of an PORT chnl id failed"); |
| return NULL; |
| } |
| |
| channel = ipc_imem_channel_open(ipc_imem, ch_id, hp_id); |
| |
| if (!channel) { |
| dev_err(ipc_imem->dev, "PORT channel id open failed"); |
| return NULL; |
| } |
| |
| return channel; |
| } |
| |
| /* transfer skb to modem */ |
| int ipc_imem_sys_cdev_write(struct iosm_cdev *ipc_cdev, struct sk_buff *skb) |
| { |
| struct ipc_mem_channel *channel = ipc_cdev->channel; |
| struct iosm_imem *ipc_imem = ipc_cdev->ipc_imem; |
| int ret = -EIO; |
| |
| if (!ipc_imem_is_channel_active(ipc_imem, channel) || |
| ipc_imem->phase == IPC_P_OFF_REQ) |
| goto out; |
| |
| ret = ipc_imem_map_skb_to_dma(ipc_imem, skb); |
| |
| if (ret) |
| goto out; |
| |
| /* Add skb to the uplink skbuf accumulator. */ |
| skb_queue_tail(&channel->ul_list, skb); |
| |
| ret = ipc_imem_call_cdev_write(ipc_imem); |
| |
| if (ret) { |
| skb_dequeue_tail(&channel->ul_list); |
| dev_err(ipc_cdev->dev, "channel id[%d] write failed\n", |
| ipc_cdev->channel->channel_id); |
| } |
| out: |
| return ret; |
| } |
| |
| /* Open a SIO link to CP and return the channel instance */ |
| struct ipc_mem_channel *ipc_imem_sys_devlink_open(struct iosm_imem *ipc_imem) |
| { |
| struct ipc_mem_channel *channel; |
| enum ipc_phase phase; |
| int channel_id; |
| |
| phase = ipc_imem_phase_update(ipc_imem); |
| switch (phase) { |
| case IPC_P_OFF: |
| case IPC_P_ROM: |
| /* Get a channel id as flash id and reserve it. */ |
| channel_id = ipc_imem_channel_alloc(ipc_imem, |
| IPC_MEM_CTRL_CHL_ID_7, |
| IPC_CTYPE_CTRL); |
| |
| if (channel_id < 0) { |
| dev_err(ipc_imem->dev, |
| "reservation of a flash channel id failed"); |
| goto error; |
| } |
| |
| ipc_imem->ipc_devlink->devlink_sio.channel_id = channel_id; |
| channel = &ipc_imem->channels[channel_id]; |
| |
| /* Enqueue chip info data to be read */ |
| if (ipc_imem_devlink_trigger_chip_info(ipc_imem)) { |
| dev_err(ipc_imem->dev, "Enqueue of chip info failed"); |
| channel->state = IMEM_CHANNEL_FREE; |
| goto error; |
| } |
| |
| return channel; |
| |
| case IPC_P_PSI: |
| case IPC_P_EBL: |
| ipc_imem->cp_version = ipc_mmio_get_cp_version(ipc_imem->mmio); |
| if (ipc_imem->cp_version == -1) { |
| dev_err(ipc_imem->dev, "invalid CP version"); |
| goto error; |
| } |
| |
| channel_id = ipc_imem->ipc_devlink->devlink_sio.channel_id; |
| return ipc_imem_channel_open(ipc_imem, channel_id, |
| IPC_HP_CDEV_OPEN); |
| |
| default: |
| /* CP is in the wrong state (e.g. CRASH or CD_READY) */ |
| dev_err(ipc_imem->dev, "SIO open refused, phase %d", phase); |
| } |
| error: |
| return NULL; |
| } |
| |
| /* Release a SIO channel link to CP. */ |
| void ipc_imem_sys_devlink_close(struct iosm_devlink *ipc_devlink) |
| { |
| struct iosm_imem *ipc_imem = ipc_devlink->pcie->imem; |
| int boot_check_timeout = BOOT_CHECK_DEFAULT_TIMEOUT; |
| enum ipc_mem_exec_stage exec_stage; |
| struct ipc_mem_channel *channel; |
| int status = 0; |
| u32 tail = 0; |
| |
| channel = ipc_imem->ipc_devlink->devlink_sio.channel; |
| /* Increase the total wait time to boot_check_timeout */ |
| do { |
| exec_stage = ipc_mmio_get_exec_stage(ipc_imem->mmio); |
| if (exec_stage == IPC_MEM_EXEC_STAGE_RUN || |
| exec_stage == IPC_MEM_EXEC_STAGE_PSI) |
| break; |
| msleep(20); |
| boot_check_timeout -= 20; |
| } while (boot_check_timeout > 0); |
| |
| /* If there are any pending TDs then wait for Timeout/Completion before |
| * closing pipe. |
| */ |
| if (channel->ul_pipe.old_tail != channel->ul_pipe.old_head) { |
| status = wait_for_completion_interruptible_timeout |
| (&ipc_imem->ul_pend_sem, |
| msecs_to_jiffies(IPC_PEND_DATA_TIMEOUT)); |
| if (status == 0) { |
| dev_dbg(ipc_imem->dev, |
| "Data Timeout on UL-Pipe:%d Head:%d Tail:%d", |
| channel->ul_pipe.pipe_nr, |
| channel->ul_pipe.old_head, |
| channel->ul_pipe.old_tail); |
| } |
| } |
| |
| ipc_protocol_get_head_tail_index(ipc_imem->ipc_protocol, |
| &channel->dl_pipe, NULL, &tail); |
| |
| if (tail != channel->dl_pipe.old_tail) { |
| status = wait_for_completion_interruptible_timeout |
| (&ipc_imem->dl_pend_sem, |
| msecs_to_jiffies(IPC_PEND_DATA_TIMEOUT)); |
| if (status == 0) { |
| dev_dbg(ipc_imem->dev, |
| "Data Timeout on DL-Pipe:%d Head:%d Tail:%d", |
| channel->dl_pipe.pipe_nr, |
| channel->dl_pipe.old_head, |
| channel->dl_pipe.old_tail); |
| } |
| } |
| |
| /* Due to wait for completion in messages, there is a small window |
| * between closing the pipe and updating the channel is closed. In this |
| * small window there could be HP update from Host Driver. Hence update |
| * the channel state as CLOSING to aviod unnecessary interrupt |
| * towards CP. |
| */ |
| channel->state = IMEM_CHANNEL_CLOSING; |
| /* Release the pipe resources */ |
| ipc_imem_pipe_cleanup(ipc_imem, &channel->ul_pipe); |
| ipc_imem_pipe_cleanup(ipc_imem, &channel->dl_pipe); |
| } |
| |
| void ipc_imem_sys_devlink_notify_rx(struct iosm_devlink *ipc_devlink, |
| struct sk_buff *skb) |
| { |
| skb_queue_tail(&ipc_devlink->devlink_sio.rx_list, skb); |
| complete(&ipc_devlink->devlink_sio.read_sem); |
| } |
| |
| /* PSI transfer */ |
| static int ipc_imem_sys_psi_transfer(struct iosm_imem *ipc_imem, |
| struct ipc_mem_channel *channel, |
| unsigned char *buf, int count) |
| { |
| int psi_start_timeout = PSI_START_DEFAULT_TIMEOUT; |
| enum ipc_mem_exec_stage exec_stage; |
| |
| dma_addr_t mapping = 0; |
| int ret; |
| |
| ret = ipc_pcie_addr_map(ipc_imem->pcie, buf, count, &mapping, |
| DMA_TO_DEVICE); |
| if (ret) |
| goto pcie_addr_map_fail; |
| |
| /* Save the PSI information for the CP ROM driver on the doorbell |
| * scratchpad. |
| */ |
| ipc_mmio_set_psi_addr_and_size(ipc_imem->mmio, mapping, count); |
| ipc_doorbell_fire(ipc_imem->pcie, 0, IPC_MEM_EXEC_STAGE_BOOT); |
| |
| ret = wait_for_completion_interruptible_timeout |
| (&channel->ul_sem, |
| msecs_to_jiffies(IPC_PSI_TRANSFER_TIMEOUT)); |
| |
| if (ret <= 0) { |
| dev_err(ipc_imem->dev, "Failed PSI transfer to CP, Error-%d", |
| ret); |
| goto psi_transfer_fail; |
| } |
| /* If the PSI download fails, return the CP boot ROM exit code */ |
| if (ipc_imem->rom_exit_code != IMEM_ROM_EXIT_OPEN_EXT && |
| ipc_imem->rom_exit_code != IMEM_ROM_EXIT_CERT_EXT) { |
| ret = (-1) * ((int)ipc_imem->rom_exit_code); |
| goto psi_transfer_fail; |
| } |
| |
| dev_dbg(ipc_imem->dev, "PSI image successfully downloaded"); |
| |
| /* Wait psi_start_timeout milliseconds until the CP PSI image is |
| * running and updates the execution_stage field with |
| * IPC_MEM_EXEC_STAGE_PSI. Verify the execution stage. |
| */ |
| do { |
| exec_stage = ipc_mmio_get_exec_stage(ipc_imem->mmio); |
| |
| if (exec_stage == IPC_MEM_EXEC_STAGE_PSI) |
| break; |
| |
| msleep(20); |
| psi_start_timeout -= 20; |
| } while (psi_start_timeout > 0); |
| |
| if (exec_stage != IPC_MEM_EXEC_STAGE_PSI) |
| goto psi_transfer_fail; /* Unknown status of CP PSI process. */ |
| |
| ipc_imem->phase = IPC_P_PSI; |
| |
| /* Enter the PSI phase. */ |
| dev_dbg(ipc_imem->dev, "execution_stage[%X] eq. PSI", exec_stage); |
| |
| /* Request the RUNNING state from CP and wait until it was reached |
| * or timeout. |
| */ |
| ipc_imem_ipc_init_check(ipc_imem); |
| |
| ret = wait_for_completion_interruptible_timeout |
| (&channel->ul_sem, msecs_to_jiffies(IPC_PSI_TRANSFER_TIMEOUT)); |
| if (ret <= 0) { |
| dev_err(ipc_imem->dev, |
| "Failed PSI RUNNING state on CP, Error-%d", ret); |
| goto psi_transfer_fail; |
| } |
| |
| if (ipc_mmio_get_ipc_state(ipc_imem->mmio) != |
| IPC_MEM_DEVICE_IPC_RUNNING) { |
| dev_err(ipc_imem->dev, |
| "ch[%d] %s: unexpected CP IPC state %d, not RUNNING", |
| channel->channel_id, |
| ipc_imem_phase_get_string(ipc_imem->phase), |
| ipc_mmio_get_ipc_state(ipc_imem->mmio)); |
| |
| goto psi_transfer_fail; |
| } |
| |
| /* Create the flash channel for the transfer of the images. */ |
| if (!ipc_imem_sys_devlink_open(ipc_imem)) { |
| dev_err(ipc_imem->dev, "can't open flash_channel"); |
| goto psi_transfer_fail; |
| } |
| |
| ret = 0; |
| psi_transfer_fail: |
| ipc_pcie_addr_unmap(ipc_imem->pcie, count, mapping, DMA_TO_DEVICE); |
| pcie_addr_map_fail: |
| return ret; |
| } |
| |
| int ipc_imem_sys_devlink_write(struct iosm_devlink *ipc_devlink, |
| unsigned char *buf, int count) |
| { |
| struct iosm_imem *ipc_imem = ipc_devlink->pcie->imem; |
| struct ipc_mem_channel *channel; |
| struct sk_buff *skb; |
| dma_addr_t mapping; |
| int ret; |
| |
| channel = ipc_imem->ipc_devlink->devlink_sio.channel; |
| |
| /* In the ROM phase the PSI image is passed to CP about a specific |
| * shared memory area and doorbell scratchpad directly. |
| */ |
| if (ipc_imem->phase == IPC_P_ROM) { |
| ret = ipc_imem_sys_psi_transfer(ipc_imem, channel, buf, count); |
| /* If the PSI transfer fails then send crash |
| * Signature. |
| */ |
| if (ret > 0) |
| ipc_imem_msg_send_feature_set(ipc_imem, |
| IPC_MEM_INBAND_CRASH_SIG, |
| false); |
| goto out; |
| } |
| |
| /* Allocate skb memory for the uplink buffer. */ |
| skb = ipc_pcie_alloc_skb(ipc_devlink->pcie, count, GFP_KERNEL, &mapping, |
| DMA_TO_DEVICE, 0); |
| if (!skb) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| memcpy(skb_put(skb, count), buf, count); |
| |
| IPC_CB(skb)->op_type = UL_USR_OP_BLOCKED; |
| |
| /* Add skb to the uplink skbuf accumulator. */ |
| skb_queue_tail(&channel->ul_list, skb); |
| |
| /* Inform the IPC tasklet to pass uplink IP packets to CP. */ |
| if (!ipc_imem_call_cdev_write(ipc_imem)) { |
| ret = wait_for_completion_interruptible(&channel->ul_sem); |
| |
| if (ret < 0) { |
| dev_err(ipc_imem->dev, |
| "ch[%d] no CP confirmation, status = %d", |
| channel->channel_id, ret); |
| ipc_pcie_kfree_skb(ipc_devlink->pcie, skb); |
| goto out; |
| } |
| } |
| ret = 0; |
| out: |
| return ret; |
| } |
| |
| int ipc_imem_sys_devlink_read(struct iosm_devlink *devlink, u8 *data, |
| u32 bytes_to_read, u32 *bytes_read) |
| { |
| struct sk_buff *skb = NULL; |
| int rc = 0; |
| |
| /* check skb is available in rx_list or wait for skb */ |
| devlink->devlink_sio.devlink_read_pend = 1; |
| while (!skb && !(skb = skb_dequeue(&devlink->devlink_sio.rx_list))) { |
| if (!wait_for_completion_interruptible_timeout |
| (&devlink->devlink_sio.read_sem, |
| msecs_to_jiffies(IPC_READ_TIMEOUT))) { |
| dev_err(devlink->dev, "Read timedout"); |
| rc = -ETIMEDOUT; |
| goto devlink_read_fail; |
| } |
| } |
| devlink->devlink_sio.devlink_read_pend = 0; |
| if (bytes_to_read < skb->len) { |
| dev_err(devlink->dev, "Invalid size,expected len %d", skb->len); |
| rc = -EINVAL; |
| goto devlink_read_fail; |
| } |
| *bytes_read = skb->len; |
| memcpy(data, skb->data, skb->len); |
| |
| devlink_read_fail: |
| ipc_pcie_kfree_skb(devlink->pcie, skb); |
| return rc; |
| } |