| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * STM32 Factory-programmed memory read access driver |
| * |
| * Copyright (C) 2017, STMicroelectronics - All Rights Reserved |
| * Author: Fabrice Gasnier <fabrice.gasnier@st.com> for STMicroelectronics. |
| */ |
| |
| #include <linux/arm-smccc.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/nvmem-provider.h> |
| #include <linux/of_device.h> |
| |
| /* BSEC secure service access from non-secure */ |
| #define STM32_SMC_BSEC 0x82001003 |
| #define STM32_SMC_READ_SHADOW 0x01 |
| #define STM32_SMC_PROG_OTP 0x02 |
| #define STM32_SMC_WRITE_SHADOW 0x03 |
| #define STM32_SMC_READ_OTP 0x04 |
| |
| /* shadow registers offest */ |
| #define STM32MP15_BSEC_DATA0 0x200 |
| |
| /* 32 (x 32-bits) lower shadow registers */ |
| #define STM32MP15_BSEC_NUM_LOWER 32 |
| |
| struct stm32_romem_cfg { |
| int size; |
| }; |
| |
| struct stm32_romem_priv { |
| void __iomem *base; |
| struct nvmem_config cfg; |
| }; |
| |
| static int stm32_romem_read(void *context, unsigned int offset, void *buf, |
| size_t bytes) |
| { |
| struct stm32_romem_priv *priv = context; |
| u8 *buf8 = buf; |
| int i; |
| |
| for (i = offset; i < offset + bytes; i++) |
| *buf8++ = readb_relaxed(priv->base + i); |
| |
| return 0; |
| } |
| |
| static int stm32_bsec_smc(u8 op, u32 otp, u32 data, u32 *result) |
| { |
| #if IS_ENABLED(CONFIG_HAVE_ARM_SMCCC) |
| struct arm_smccc_res res; |
| |
| arm_smccc_smc(STM32_SMC_BSEC, op, otp, data, 0, 0, 0, 0, &res); |
| if (res.a0) |
| return -EIO; |
| |
| if (result) |
| *result = (u32)res.a1; |
| |
| return 0; |
| #else |
| return -ENXIO; |
| #endif |
| } |
| |
| static int stm32_bsec_read(void *context, unsigned int offset, void *buf, |
| size_t bytes) |
| { |
| struct stm32_romem_priv *priv = context; |
| struct device *dev = priv->cfg.dev; |
| u32 roffset, rbytes, val; |
| u8 *buf8 = buf, *val8 = (u8 *)&val; |
| int i, j = 0, ret, skip_bytes, size; |
| |
| /* Round unaligned access to 32-bits */ |
| roffset = rounddown(offset, 4); |
| skip_bytes = offset & 0x3; |
| rbytes = roundup(bytes + skip_bytes, 4); |
| |
| if (roffset + rbytes > priv->cfg.size) |
| return -EINVAL; |
| |
| for (i = roffset; (i < roffset + rbytes); i += 4) { |
| u32 otp = i >> 2; |
| |
| if (otp < STM32MP15_BSEC_NUM_LOWER) { |
| /* read lower data from shadow registers */ |
| val = readl_relaxed( |
| priv->base + STM32MP15_BSEC_DATA0 + i); |
| } else { |
| ret = stm32_bsec_smc(STM32_SMC_READ_SHADOW, otp, 0, |
| &val); |
| if (ret) { |
| dev_err(dev, "Can't read data%d (%d)\n", otp, |
| ret); |
| return ret; |
| } |
| } |
| /* skip first bytes in case of unaligned read */ |
| if (skip_bytes) |
| size = min(bytes, (size_t)(4 - skip_bytes)); |
| else |
| size = min(bytes, (size_t)4); |
| memcpy(&buf8[j], &val8[skip_bytes], size); |
| bytes -= size; |
| j += size; |
| skip_bytes = 0; |
| } |
| |
| return 0; |
| } |
| |
| static int stm32_bsec_write(void *context, unsigned int offset, void *buf, |
| size_t bytes) |
| { |
| struct stm32_romem_priv *priv = context; |
| struct device *dev = priv->cfg.dev; |
| u32 *buf32 = buf; |
| int ret, i; |
| |
| /* Allow only writing complete 32-bits aligned words */ |
| if ((bytes % 4) || (offset % 4)) |
| return -EINVAL; |
| |
| for (i = offset; i < offset + bytes; i += 4) { |
| ret = stm32_bsec_smc(STM32_SMC_PROG_OTP, i >> 2, *buf32++, |
| NULL); |
| if (ret) { |
| dev_err(dev, "Can't write data%d (%d)\n", i >> 2, ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int stm32_romem_probe(struct platform_device *pdev) |
| { |
| const struct stm32_romem_cfg *cfg; |
| struct device *dev = &pdev->dev; |
| struct stm32_romem_priv *priv; |
| struct resource *res; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| priv->base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(priv->base)) |
| return PTR_ERR(priv->base); |
| |
| priv->cfg.name = "stm32-romem"; |
| priv->cfg.word_size = 1; |
| priv->cfg.stride = 1; |
| priv->cfg.dev = dev; |
| priv->cfg.priv = priv; |
| priv->cfg.owner = THIS_MODULE; |
| |
| cfg = (const struct stm32_romem_cfg *) |
| of_match_device(dev->driver->of_match_table, dev)->data; |
| if (!cfg) { |
| priv->cfg.read_only = true; |
| priv->cfg.size = resource_size(res); |
| priv->cfg.reg_read = stm32_romem_read; |
| } else { |
| priv->cfg.size = cfg->size; |
| priv->cfg.reg_read = stm32_bsec_read; |
| priv->cfg.reg_write = stm32_bsec_write; |
| } |
| |
| return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &priv->cfg)); |
| } |
| |
| static const struct stm32_romem_cfg stm32mp15_bsec_cfg = { |
| .size = 384, /* 96 x 32-bits data words */ |
| }; |
| |
| static const struct of_device_id stm32_romem_of_match[] = { |
| { .compatible = "st,stm32f4-otp", }, { |
| .compatible = "st,stm32mp15-bsec", |
| .data = (void *)&stm32mp15_bsec_cfg, |
| }, { |
| }, |
| }; |
| MODULE_DEVICE_TABLE(of, stm32_romem_of_match); |
| |
| static struct platform_driver stm32_romem_driver = { |
| .probe = stm32_romem_probe, |
| .driver = { |
| .name = "stm32-romem", |
| .of_match_table = of_match_ptr(stm32_romem_of_match), |
| }, |
| }; |
| module_platform_driver(stm32_romem_driver); |
| |
| MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>"); |
| MODULE_DESCRIPTION("STMicroelectronics STM32 RO-MEM"); |
| MODULE_ALIAS("platform:nvmem-stm32-romem"); |
| MODULE_LICENSE("GPL v2"); |