Google Git
Sign in
android-kvm / linux / 7e22e91102c6b9df7c4ae2168910e19d2bb14cd6 / . / drivers / char / pcmcia / synclink_cs.c
blob: d39cca659a3f4839233475d32a6d63c16553209d [file] [log] [blame]
/*
* linux/drivers/char/pcmcia/synclink_cs.c
*
* $Id: synclink_cs.c,v 4.34 2005/09/08 13:20:54 paulkf Exp $
*
* Device driver for Microgate SyncLink PC Card
* multiprotocol serial adapter.
*
* written by Paul Fulghum for Microgate Corporation
* paulkf@microgate.com
*
* Microgate and SyncLink are trademarks of Microgate Corporation
*
* This code is released under the GNU General Public License (GPL)
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
#if defined(__i386__)
# define BREAKPOINT() asm(" int $3");
#else
# define BREAKPOINT() { }
#endif
#define MAX_DEVICE_COUNT 4
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/time.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/major.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/ioctl.h>
#include <linux/synclink.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/dma.h>
#include <linux/bitops.h>
#include <asm/types.h>
#include <linux/termios.h>
#include <linux/workqueue.h>
#include <linux/hdlc.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_CS_MODULE))
#define SYNCLINK_GENERIC_HDLC 1
#else
#define SYNCLINK_GENERIC_HDLC 0
#endif
#define GET_USER(error,value,addr) error = get_user(value,addr)
#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
#define PUT_USER(error,value,addr) error = put_user(value,addr)
#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
#include <asm/uaccess.h>
static MGSL_PARAMS default_params = {
MGSL_MODE_HDLC, /* unsigned long mode */
0, /* unsigned char loopback; */
HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
0, /* unsigned long clock_speed; */
0xff, /* unsigned char addr_filter; */
HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
9600, /* unsigned long data_rate; */
8, /* unsigned char data_bits; */
1, /* unsigned char stop_bits; */
ASYNC_PARITY_NONE /* unsigned char parity; */
};
typedef struct {
int count;
unsigned char status;
char data[1];
} RXBUF;
/* The queue of BH actions to be performed */
#define BH_RECEIVE 1
#define BH_TRANSMIT 2
#define BH_STATUS 4
#define IO_PIN_SHUTDOWN_LIMIT 100
#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
struct _input_signal_events {
int ri_up;
int ri_down;
int dsr_up;
int dsr_down;
int dcd_up;
int dcd_down;
int cts_up;
int cts_down;
};
/*
* Device instance data structure
*/
typedef struct _mgslpc_info {
struct tty_port port;
void *if_ptr; /* General purpose pointer (used by SPPP) */
int magic;
int line;
struct mgsl_icount icount;
int timeout;
int x_char; /* xon/xoff character */
unsigned char read_status_mask;
unsigned char ignore_status_mask;
unsigned char *tx_buf;
int tx_put;
int tx_get;
int tx_count;
/* circular list of fixed length rx buffers */
unsigned char *rx_buf; /* memory allocated for all rx buffers */
int rx_buf_total_size; /* size of memory allocated for rx buffers */
int rx_put; /* index of next empty rx buffer */
int rx_get; /* index of next full rx buffer */
int rx_buf_size; /* size in bytes of single rx buffer */
int rx_buf_count; /* total number of rx buffers */
int rx_frame_count; /* number of full rx buffers */
wait_queue_head_t status_event_wait_q;
wait_queue_head_t event_wait_q;
struct timer_list tx_timer; /* HDLC transmit timeout timer */
struct _mgslpc_info *next_device; /* device list link */
unsigned short imra_value;
unsigned short imrb_value;
unsigned char pim_value;
spinlock_t lock;
struct work_struct task; /* task structure for scheduling bh */
u32 max_frame_size;
u32 pending_bh;
bool bh_running;
bool bh_requested;
int dcd_chkcount; /* check counts to prevent */
int cts_chkcount; /* too many IRQs if a signal */
int dsr_chkcount; /* is floating */
int ri_chkcount;
bool rx_enabled;
bool rx_overflow;
bool tx_enabled;
bool tx_active;
bool tx_aborting;
u32 idle_mode;
int if_mode; /* serial interface selection (RS-232, v.35 etc) */
char device_name[25]; /* device instance name */
unsigned int io_base; /* base I/O address of adapter */
unsigned int irq_level;
MGSL_PARAMS params; /* communications parameters */
unsigned char serial_signals; /* current serial signal states */
bool irq_occurred; /* for diagnostics use */
char testing_irq;
unsigned int init_error; /* startup error (DIAGS) */
char *flag_buf;
bool drop_rts_on_tx_done;
struct _input_signal_events input_signal_events;
/* PCMCIA support */
struct pcmcia_device *p_dev;
int stop;
/* SPPP/Cisco HDLC device parts */
int netcount;
spinlock_t netlock;
#if SYNCLINK_GENERIC_HDLC
struct net_device *netdev;
#endif
} MGSLPC_INFO;
#define MGSLPC_MAGIC 0x5402
/*
* The size of the serial xmit buffer is 1 page, or 4096 bytes
*/
#define TXBUFSIZE 4096
#define CHA 0x00 /* channel A offset */
#define CHB 0x40 /* channel B offset */
/*
* FIXME: PPC has PVR defined in asm/reg.h. For now we just undef it.
*/
#undef PVR
#define RXFIFO 0
#define TXFIFO 0
#define STAR 0x20
#define CMDR 0x20
#define RSTA 0x21
#define PRE 0x21
#define MODE 0x22
#define TIMR 0x23
#define XAD1 0x24
#define XAD2 0x25
#define RAH1 0x26
#define RAH2 0x27
#define DAFO 0x27
#define RAL1 0x28
#define RFC 0x28
#define RHCR 0x29
#define RAL2 0x29
#define RBCL 0x2a
#define XBCL 0x2a
#define RBCH 0x2b
#define XBCH 0x2b
#define CCR0 0x2c
#define CCR1 0x2d
#define CCR2 0x2e
#define CCR3 0x2f
#define VSTR 0x34
#define BGR 0x34
#define RLCR 0x35
#define AML 0x36
#define AMH 0x37
#define GIS 0x38
#define IVA 0x38
#define IPC 0x39
#define ISR 0x3a
#define IMR 0x3a
#define PVR 0x3c
#define PIS 0x3d
#define PIM 0x3d
#define PCR 0x3e
#define CCR4 0x3f
// IMR/ISR
#define IRQ_BREAK_ON BIT15 // rx break detected
#define IRQ_DATAOVERRUN BIT14 // receive data overflow
#define IRQ_ALLSENT BIT13 // all sent
#define IRQ_UNDERRUN BIT12 // transmit data underrun
#define IRQ_TIMER BIT11 // timer interrupt
#define IRQ_CTS BIT10 // CTS status change
#define IRQ_TXREPEAT BIT9 // tx message repeat
#define IRQ_TXFIFO BIT8 // transmit pool ready
#define IRQ_RXEOM BIT7 // receive message end
#define IRQ_EXITHUNT BIT6 // receive frame start
#define IRQ_RXTIME BIT6 // rx char timeout
#define IRQ_DCD BIT2 // carrier detect status change
#define IRQ_OVERRUN BIT1 // receive frame overflow
#define IRQ_RXFIFO BIT0 // receive pool full
// STAR
#define XFW BIT6 // transmit FIFO write enable
#define CEC BIT2 // command executing
#define CTS BIT1 // CTS state
#define PVR_DTR BIT0
#define PVR_DSR BIT1
#define PVR_RI BIT2
#define PVR_AUTOCTS BIT3
#define PVR_RS232 0x20 /* 0010b */
#define PVR_V35 0xe0 /* 1110b */
#define PVR_RS422 0x40 /* 0100b */
/* Register access functions */
#define write_reg(info, reg, val) outb((val),(info)->io_base + (reg))
#define read_reg(info, reg) inb((info)->io_base + (reg))
#define read_reg16(info, reg) inw((info)->io_base + (reg))
#define write_reg16(info, reg, val) outw((val), (info)->io_base + (reg))
#define set_reg_bits(info, reg, mask) \
write_reg(info, (reg), \
(unsigned char) (read_reg(info, (reg)) | (mask)))
#define clear_reg_bits(info, reg, mask) \
write_reg(info, (reg), \
(unsigned char) (read_reg(info, (reg)) & ~(mask)))
/*
* interrupt enable/disable routines
*/
static void irq_disable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
{
if (channel == CHA) {
info->imra_value |= mask;
write_reg16(info, CHA + IMR, info->imra_value);
} else {
info->imrb_value |= mask;
write_reg16(info, CHB + IMR, info->imrb_value);
}
}
static void irq_enable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
{
if (channel == CHA) {
info->imra_value &= ~mask;
write_reg16(info, CHA + IMR, info->imra_value);
} else {
info->imrb_value &= ~mask;
write_reg16(info, CHB + IMR, info->imrb_value);
}
}
#define port_irq_disable(info, mask) \
{ info->pim_value |= (mask); write_reg(info, PIM, info->pim_value); }
#define port_irq_enable(info, mask) \
{ info->pim_value &= ~(mask); write_reg(info, PIM, info->pim_value); }
static void rx_start(MGSLPC_INFO *info);
static void rx_stop(MGSLPC_INFO *info);
static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty);
static void tx_stop(MGSLPC_INFO *info);
static void tx_set_idle(MGSLPC_INFO *info);
static void get_signals(MGSLPC_INFO *info);
static void set_signals(MGSLPC_INFO *info);
static void reset_device(MGSLPC_INFO *info);
static void hdlc_mode(MGSLPC_INFO *info);
static void async_mode(MGSLPC_INFO *info);
static void tx_timeout(unsigned long context);
static int carrier_raised(struct tty_port *port);
static void dtr_rts(struct tty_port *port, int onoff);
#if SYNCLINK_GENERIC_HDLC
#define dev_to_port(D) (dev_to_hdlc(D)->priv)
static void hdlcdev_tx_done(MGSLPC_INFO *info);
static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size);
static int hdlcdev_init(MGSLPC_INFO *info);
static void hdlcdev_exit(MGSLPC_INFO *info);
#endif
static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit);
static bool register_test(MGSLPC_INFO *info);
static bool irq_test(MGSLPC_INFO *info);
static int adapter_test(MGSLPC_INFO *info);
static int claim_resources(MGSLPC_INFO *info);
static void release_resources(MGSLPC_INFO *info);
static int mgslpc_add_device(MGSLPC_INFO *info);
static void mgslpc_remove_device(MGSLPC_INFO *info);
static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty);
static void rx_reset_buffers(MGSLPC_INFO *info);
static int rx_alloc_buffers(MGSLPC_INFO *info);
static void rx_free_buffers(MGSLPC_INFO *info);
static irqreturn_t mgslpc_isr(int irq, void *dev_id);
/*
* Bottom half interrupt handlers
*/
static void bh_handler(struct work_struct *work);
static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty);
static void bh_status(MGSLPC_INFO *info);
/*
* ioctl handlers
*/
static int tiocmget(struct tty_struct *tty);
static int tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount);
static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params);
static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params, struct tty_struct *tty);
static int get_txidle(MGSLPC_INFO *info, int __user *idle_mode);
static int set_txidle(MGSLPC_INFO *info, int idle_mode);
static int set_txenable(MGSLPC_INFO *info, int enable, struct tty_struct *tty);
static int tx_abort(MGSLPC_INFO *info);
static int set_rxenable(MGSLPC_INFO *info, int enable);
static int wait_events(MGSLPC_INFO *info, int __user *mask);
static MGSLPC_INFO *mgslpc_device_list = NULL;
static int mgslpc_device_count = 0;
/*
* Set this param to non-zero to load eax with the
* .text section address and breakpoint on module load.
* This is useful for use with gdb and add-symbol-file command.
*/
static bool break_on_load=0;
/*
* Driver major number, defaults to zero to get auto
* assigned major number. May be forced as module parameter.
*/
static int ttymajor=0;
static int debug_level = 0;
static int maxframe[MAX_DEVICE_COUNT] = {0,};
module_param(break_on_load, bool, 0);
module_param(ttymajor, int, 0);
module_param(debug_level, int, 0);
module_param_array(maxframe, int, NULL, 0);
MODULE_LICENSE("GPL");
static char *driver_name = "SyncLink PC Card driver";
static char *driver_version = "$Revision: 4.34 $";
static struct tty_driver *serial_driver;
/* number of characters left in xmit buffer before we ask for more */
#define WAKEUP_CHARS 256
static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty);
static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout);
/* PCMCIA prototypes */
static int mgslpc_config(struct pcmcia_device *link);
static void mgslpc_release(u_long arg);
static void mgslpc_detach(struct pcmcia_device *p_dev);
/*
* 1st function defined in .text section. Calling this function in
* init_module() followed by a breakpoint allows a remote debugger
* (gdb) to get the .text address for the add-symbol-file command.
* This allows remote debugging of dynamically loadable modules.
*/
static void* mgslpc_get_text_ptr(void)
{
return mgslpc_get_text_ptr;
}
/**
* line discipline callback wrappers
*
* The wrappers maintain line discipline references
* while calling into the line discipline.
*
* ldisc_receive_buf - pass receive data to line discipline
*/
static void ldisc_receive_buf(struct tty_struct *tty,
const __u8 *data, char *flags, int count)
{
struct tty_ldisc *ld;
if (!tty)
return;
ld = tty_ldisc_ref(tty);
if (ld) {
if (ld->ops->receive_buf)
ld->ops->receive_buf(tty, data, flags, count);
tty_ldisc_deref(ld);
}
}
static const struct tty_port_operations mgslpc_port_ops = {
.carrier_raised = carrier_raised,
.dtr_rts = dtr_rts
};
static int mgslpc_probe(struct pcmcia_device *link)
{
MGSLPC_INFO *info;
int ret;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("mgslpc_attach\n");
info = kzalloc(sizeof(MGSLPC_INFO), GFP_KERNEL);
if (!info) {
printk("Error can't allocate device instance data\n");
return -ENOMEM;
}
info->magic = MGSLPC_MAGIC;
tty_port_init(&info->port);
info->port.ops = &mgslpc_port_ops;
INIT_WORK(&info->task, bh_handler);
info->max_frame_size = 4096;
info->port.close_delay = 5*HZ/10;
info->port.closing_wait = 30*HZ;
init_waitqueue_head(&info->status_event_wait_q);
init_waitqueue_head(&info->event_wait_q);
spin_lock_init(&info->lock);
spin_lock_init(&info->netlock);
memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
info->idle_mode = HDLC_TXIDLE_FLAGS;
info->imra_value = 0xffff;
info->imrb_value = 0xffff;
info->pim_value = 0xff;
info->p_dev = link;
link->priv = info;
/* Initialize the struct pcmcia_device structure */
ret = mgslpc_config(link);
if (ret != 0)
goto failed;
ret = mgslpc_add_device(info);
if (ret != 0)
goto failed_release;
return 0;
failed_release:
mgslpc_release((u_long)link);
failed:
tty_port_destroy(&info->port);
kfree(info);
return ret;
}
/* Card has been inserted.
*/
static int mgslpc_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
{
return pcmcia_request_io(p_dev);
}
static int mgslpc_config(struct pcmcia_device *link)
{
MGSLPC_INFO *info = link->priv;
int ret;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("mgslpc_config(0x%p)\n", link);
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
ret = pcmcia_loop_config(link, mgslpc_ioprobe, NULL);
if (ret != 0)
goto failed;
link->config_index = 8;
link->config_regs = PRESENT_OPTION;
ret = pcmcia_request_irq(link, mgslpc_isr);
if (ret)
goto failed;
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
info->io_base = link->resource[0]->start;
info->irq_level = link->irq;
return 0;
failed:
mgslpc_release((u_long)link);
return -ENODEV;
}
/* Card has been removed.
* Unregister device and release PCMCIA configuration.
* If device is open, postpone until it is closed.
*/
static void mgslpc_release(u_long arg)
{
struct pcmcia_device *link = (struct pcmcia_device *)arg;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("mgslpc_release(0x%p)\n", link);
pcmcia_disable_device(link);
}
static void mgslpc_detach(struct pcmcia_device *link)
{
if (debug_level >= DEBUG_LEVEL_INFO)
printk("mgslpc_detach(0x%p)\n", link);
((MGSLPC_INFO *)link->priv)->stop = 1;
mgslpc_release((u_long)link);
mgslpc_remove_device((MGSLPC_INFO *)link->priv);
}
static int mgslpc_suspend(struct pcmcia_device *link)
{
MGSLPC_INFO *info = link->priv;
info->stop = 1;
return 0;
}
static int mgslpc_resume(struct pcmcia_device *link)
{
MGSLPC_INFO *info = link->priv;
info->stop = 0;
return 0;
}
static inline bool mgslpc_paranoia_check(MGSLPC_INFO *info,
char *name, const char *routine)
{
#ifdef MGSLPC_PARANOIA_CHECK
static const char *badmagic =
"Warning: bad magic number for mgsl struct (%s) in %s\n";
static const char *badinfo =
"Warning: null mgslpc_info for (%s) in %s\n";
if (!info) {
printk(badinfo, name, routine);
return true;
}
if (info->magic != MGSLPC_MAGIC) {
printk(badmagic, name, routine);
return true;
}
#else
if (!info)
return true;
#endif
return false;
}
#define CMD_RXFIFO BIT7 // release current rx FIFO
#define CMD_RXRESET BIT6 // receiver reset
#define CMD_RXFIFO_READ BIT5
#define CMD_START_TIMER BIT4
#define CMD_TXFIFO BIT3 // release current tx FIFO
#define CMD_TXEOM BIT1 // transmit end message
#define CMD_TXRESET BIT0 // transmit reset
static bool wait_command_complete(MGSLPC_INFO *info, unsigned char channel)
{
int i = 0;
/* wait for command completion */
while (read_reg(info, (unsigned char)(channel+STAR)) & BIT2) {
udelay(1);
if (i++ == 1000)
return false;
}
return true;
}
static void issue_command(MGSLPC_INFO *info, unsigned char channel, unsigned char cmd)
{
wait_command_complete(info, channel);
write_reg(info, (unsigned char) (channel + CMDR), cmd);
}
static void tx_pause(struct tty_struct *tty)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
unsigned long flags;
if (mgslpc_paranoia_check(info, tty->name, "tx_pause"))
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("tx_pause(%s)\n", info->device_name);
spin_lock_irqsave(&info->lock, flags);
if (info->tx_enabled)
tx_stop(info);
spin_unlock_irqrestore(&info->lock, flags);
}
static void tx_release(struct tty_struct *tty)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
unsigned long flags;
if (mgslpc_paranoia_check(info, tty->name, "tx_release"))
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("tx_release(%s)\n", info->device_name);
spin_lock_irqsave(&info->lock, flags);
if (!info->tx_enabled)
tx_start(info, tty);
spin_unlock_irqrestore(&info->lock, flags);
}
/* Return next bottom half action to perform.
* or 0 if nothing to do.
*/
static int bh_action(MGSLPC_INFO *info)
{
unsigned long flags;
int rc = 0;
spin_lock_irqsave(&info->lock, flags);
if (info->pending_bh & BH_RECEIVE) {
info->pending_bh &= ~BH_RECEIVE;
rc = BH_RECEIVE;
} else if (info->pending_bh & BH_TRANSMIT) {
info->pending_bh &= ~BH_TRANSMIT;
rc = BH_TRANSMIT;
} else if (info->pending_bh & BH_STATUS) {
info->pending_bh &= ~BH_STATUS;
rc = BH_STATUS;
}
if (!rc) {
/* Mark BH routine as complete */
info->bh_running = false;
info->bh_requested = false;
}
spin_unlock_irqrestore(&info->lock, flags);
return rc;
}
static void bh_handler(struct work_struct *work)
{
MGSLPC_INFO *info = container_of(work, MGSLPC_INFO, task);
struct tty_struct *tty;
int action;
if (debug_level >= DEBUG_LEVEL_BH)
printk("%s(%d):bh_handler(%s) entry\n",
__FILE__,__LINE__,info->device_name);
info->bh_running = true;
tty = tty_port_tty_get(&info->port);
while((action = bh_action(info)) != 0) {
/* Process work item */
if (debug_level >= DEBUG_LEVEL_BH)
printk("%s(%d):bh_handler() work item action=%d\n",
__FILE__,__LINE__,action);
switch (action) {
case BH_RECEIVE:
while(rx_get_frame(info, tty));
break;
case BH_TRANSMIT:
bh_transmit(info, tty);
break;
case BH_STATUS:
bh_status(info);
break;
default:
/* unknown work item ID */
printk("Unknown work item ID=%08X!\n", action);
break;
}
}
tty_kref_put(tty);
if (debug_level >= DEBUG_LEVEL_BH)
printk("%s(%d):bh_handler(%s) exit\n",
__FILE__,__LINE__,info->device_name);
}
static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty)
{
if (debug_level >= DEBUG_LEVEL_BH)
printk("bh_transmit() entry on %s\n", info->device_name);
if (tty)
tty_wakeup(tty);
}
static void bh_status(MGSLPC_INFO *info)
{
info->ri_chkcount = 0;
info->dsr_chkcount = 0;
info->dcd_chkcount = 0;
info->cts_chkcount = 0;
}
/* eom: non-zero = end of frame */
static void rx_ready_hdlc(MGSLPC_INFO *info, int eom)
{
unsigned char data[2];
unsigned char fifo_count, read_count, i;
RXBUF *buf = (RXBUF*)(info->rx_buf + (info->rx_put * info->rx_buf_size));
if (debug_level >= DEBUG_LEVEL_ISR)
printk("%s(%d):rx_ready_hdlc(eom=%d)\n", __FILE__, __LINE__, eom);
if (!info->rx_enabled)
return;
if (info->rx_frame_count >= info->rx_buf_count) {
/* no more free buffers */
issue_command(info, CHA, CMD_RXRESET);
info->pending_bh |= BH_RECEIVE;
info->rx_overflow = true;
info->icount.buf_overrun++;
return;
}
if (eom) {
/* end of frame, get FIFO count from RBCL register */
fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f);
if (fifo_count == 0)
fifo_count = 32;
} else
fifo_count = 32;
do {
if (fifo_count == 1) {
read_count = 1;
data[0] = read_reg(info, CHA + RXFIFO);
} else {
read_count = 2;
*((unsigned short *) data) = read_reg16(info, CHA + RXFIFO);
}
fifo_count -= read_count;
if (!fifo_count && eom)
buf->status = data[--read_count];
for (i = 0; i < read_count; i++) {
if (buf->count >= info->max_frame_size) {
/* frame too large, reset receiver and reset current buffer */
issue_command(info, CHA, CMD_RXRESET);
buf->count = 0;
return;
}
*(buf->data + buf->count) = data[i];
buf->count++;
}
} while (fifo_count);
if (eom) {
info->pending_bh |= BH_RECEIVE;
info->rx_frame_count++;
info->rx_put++;
if (info->rx_put >= info->rx_buf_count)
info->rx_put = 0;
}
issue_command(info, CHA, CMD_RXFIFO);
}
static void rx_ready_async(MGSLPC_INFO *info, int tcd)
{
struct tty_port *port = &info->port;
unsigned char data, status, flag;
int fifo_count;
int work = 0;
struct mgsl_icount *icount = &info->icount;
if (tcd) {
/* early termination, get FIFO count from RBCL register */
fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f);
/* Zero fifo count could mean 0 or 32 bytes available.
* If BIT5 of STAR is set then at least 1 byte is available.
*/
if (!fifo_count && (read_reg(info,CHA+STAR) & BIT5))
fifo_count = 32;
} else
fifo_count = 32;
tty_buffer_request_room(port, fifo_count);
/* Flush received async data to receive data buffer. */
while (fifo_count) {
data = read_reg(info, CHA + RXFIFO);
status = read_reg(info, CHA + RXFIFO);
fifo_count -= 2;
icount->rx++;
flag = TTY_NORMAL;
// if no frameing/crc error then save data
// BIT7:parity error
// BIT6:framing error
if (status & (BIT7 + BIT6)) {
if (status & BIT7)
icount->parity++;
else
icount->frame++;
/* discard char if tty control flags say so */
if (status & info->ignore_status_mask)
continue;
status &= info->read_status_mask;
if (status & BIT7)
flag = TTY_PARITY;
else if (status & BIT6)
flag = TTY_FRAME;
}
work += tty_insert_flip_char(port, data, flag);
}
issue_command(info, CHA, CMD_RXFIFO);
if (debug_level >= DEBUG_LEVEL_ISR) {
printk("%s(%d):rx_ready_async",
__FILE__,__LINE__);
printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
__FILE__,__LINE__,icount->rx,icount->brk,
icount->parity,icount->frame,icount->overrun);
}
if (work)
tty_flip_buffer_push(port);
}
static void tx_done(MGSLPC_INFO *info, struct tty_struct *tty)
{
if (!info->tx_active)
return;
info->tx_active = false;
info->tx_aborting = false;
if (info->params.mode == MGSL_MODE_ASYNC)
return;
info->tx_count = info->tx_put = info->tx_get = 0;
del_timer(&info->tx_timer);
if (info->drop_rts_on_tx_done) {
get_signals(info);
if (info->serial_signals & SerialSignal_RTS) {
info->serial_signals &= ~SerialSignal_RTS;
set_signals(info);
}
info->drop_rts_on_tx_done = false;
}
#if SYNCLINK_GENERIC_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
else
#endif
{
if (tty && (tty->stopped || tty->hw_stopped)) {
tx_stop(info);
return;
}
info->pending_bh |= BH_TRANSMIT;
}
}
static void tx_ready(MGSLPC_INFO *info, struct tty_struct *tty)
{
unsigned char fifo_count = 32;
int c;
if (debug_level >= DEBUG_LEVEL_ISR)
printk("%s(%d):tx_ready(%s)\n", __FILE__, __LINE__, info->device_name);
if (info->params.mode == MGSL_MODE_HDLC) {
if (!info->tx_active)
return;
} else {
if (tty && (tty->stopped || tty->hw_stopped)) {
tx_stop(info);
return;
}
if (!info->tx_count)
info->tx_active = false;
}
if (!info->tx_count)
return;
while (info->tx_count && fifo_count) {
c = min(2, min_t(int, fifo_count, min(info->tx_count, TXBUFSIZE - info->tx_get)));
if (c == 1) {
write_reg(info, CHA + TXFIFO, *(info->tx_buf + info->tx_get));
} else {
write_reg16(info, CHA + TXFIFO,
*((unsigned short*)(info->tx_buf + info->tx_get)));
}
info->tx_count -= c;
info->tx_get = (info->tx_get + c) & (TXBUFSIZE - 1);
fifo_count -= c;
}
if (info->params.mode == MGSL_MODE_ASYNC) {
if (info->tx_count < WAKEUP_CHARS)
info->pending_bh |= BH_TRANSMIT;
issue_command(info, CHA, CMD_TXFIFO);
} else {
if (info->tx_count)
issue_command(info, CHA, CMD_TXFIFO);
else
issue_command(info, CHA, CMD_TXFIFO + CMD_TXEOM);
}
}
static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty)
{
get_signals(info);
if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
irq_disable(info, CHB, IRQ_CTS);
info->icount.cts++;
if (info->serial_signals & SerialSignal_CTS)
info->input_signal_events.cts_up++;
else
info->input_signal_events.cts_down++;
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
if (tty && tty_port_cts_enabled(&info->port)) {
if (tty->hw_stopped) {
if (info->serial_signals & SerialSignal_CTS) {
if (debug_level >= DEBUG_LEVEL_ISR)
printk("CTS tx start...");
tty->hw_stopped = 0;
tx_start(info, tty);
info->pending_bh |= BH_TRANSMIT;
return;
}
} else {
if (!(info->serial_signals & SerialSignal_CTS)) {
if (debug_level >= DEBUG_LEVEL_ISR)
printk("CTS tx stop...");
tty->hw_stopped = 1;
tx_stop(info);
}
}
}
info->pending_bh |= BH_STATUS;
}
static void dcd_change(MGSLPC_INFO *info, struct tty_struct *tty)
{
get_signals(info);
if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
irq_disable(info, CHB, IRQ_DCD);
info->icount.dcd++;
if (info->serial_signals & SerialSignal_DCD) {
info->input_signal_events.dcd_up++;
}
else
info->input_signal_events.dcd_down++;
#if SYNCLINK_GENERIC_HDLC
if (info->netcount) {
if (info->serial_signals & SerialSignal_DCD)
netif_carrier_on(info->netdev);
else
netif_carrier_off(info->netdev);
}
#endif
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
if (info->port.flags & ASYNC_CHECK_CD) {
if (debug_level >= DEBUG_LEVEL_ISR)
printk("%s CD now %s...", info->device_name,
(info->serial_signals & SerialSignal_DCD) ? "on" : "off");
if (info->serial_signals & SerialSignal_DCD)
wake_up_interruptible(&info->port.open_wait);
else {
if (debug_level >= DEBUG_LEVEL_ISR)
printk("doing serial hangup...");
if (tty)
tty_hangup(tty);
}
}
info->pending_bh |= BH_STATUS;
}
static void dsr_change(MGSLPC_INFO *info)
{
get_signals(info);
if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
port_irq_disable(info, PVR_DSR);
info->icount.dsr++;
if (info->serial_signals & SerialSignal_DSR)
info->input_signal_events.dsr_up++;
else
info->input_signal_events.dsr_down++;
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
info->pending_bh |= BH_STATUS;
}
static void ri_change(MGSLPC_INFO *info)
{
get_signals(info);
if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
port_irq_disable(info, PVR_RI);
info->icount.rng++;
if (info->serial_signals & SerialSignal_RI)
info->input_signal_events.ri_up++;
else
info->input_signal_events.ri_down++;
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
info->pending_bh |= BH_STATUS;
}
/* Interrupt service routine entry point.
*
* Arguments:
*
* irq interrupt number that caused interrupt
* dev_id device ID supplied during interrupt registration
*/
static irqreturn_t mgslpc_isr(int dummy, void *dev_id)
{
MGSLPC_INFO *info = dev_id;
struct tty_struct *tty;
unsigned short isr;
unsigned char gis, pis;
int count=0;
if (debug_level >= DEBUG_LEVEL_ISR)
printk("mgslpc_isr(%d) entry.\n", info->irq_level);
if (!(info->p_dev->_locked))
return IRQ_HANDLED;
tty = tty_port_tty_get(&info->port);
spin_lock(&info->lock);
while ((gis = read_reg(info, CHA + GIS))) {
if (debug_level >= DEBUG_LEVEL_ISR)
printk("mgslpc_isr %s gis=%04X\n", info->device_name,gis);
if ((gis & 0x70) || count > 1000) {
printk("synclink_cs:hardware failed or ejected\n");
break;
}
count++;
if (gis & (BIT1 | BIT0)) {
isr = read_reg16(info, CHB + ISR);
if (isr & IRQ_DCD)
dcd_change(info, tty);
if (isr & IRQ_CTS)
cts_change(info, tty);
}
if (gis & (BIT3 | BIT2))
{
isr = read_reg16(info, CHA + ISR);
if (isr & IRQ_TIMER) {
info->irq_occurred = true;
irq_disable(info, CHA, IRQ_TIMER);
}
/* receive IRQs */
if (isr & IRQ_EXITHUNT) {
info->icount.exithunt++;
wake_up_interruptible(&info->event_wait_q);
}
if (isr & IRQ_BREAK_ON) {
info->icount.brk++;
if (info->port.flags & ASYNC_SAK)
do_SAK(tty);
}
if (isr & IRQ_RXTIME) {
issue_command(info, CHA, CMD_RXFIFO_READ);
}
if (isr & (IRQ_RXEOM | IRQ_RXFIFO)) {
if (info->params.mode == MGSL_MODE_HDLC)
rx_ready_hdlc(info, isr & IRQ_RXEOM);
else
rx_ready_async(info, isr & IRQ_RXEOM);
}
/* transmit IRQs */
if (isr & IRQ_UNDERRUN) {
if (info->tx_aborting)
info->icount.txabort++;
else
info->icount.txunder++;
tx_done(info, tty);
}
else if (isr & IRQ_ALLSENT) {
info->icount.txok++;
tx_done(info, tty);
}
else if (isr & IRQ_TXFIFO)
tx_ready(info, tty);
}
if (gis & BIT7) {
pis = read_reg(info, CHA + PIS);
if (pis & BIT1)
dsr_change(info);
if (pis & BIT2)
ri_change(info);
}
}
/* Request bottom half processing if there's something
* for it to do and the bh is not already running
*/
if (info->pending_bh && !info->bh_running && !info->bh_requested) {
if (debug_level >= DEBUG_LEVEL_ISR)
printk("%s(%d):%s queueing bh task.\n",
__FILE__,__LINE__,info->device_name);
schedule_work(&info->task);
info->bh_requested = true;
}
spin_unlock(&info->lock);
tty_kref_put(tty);
if (debug_level >= DEBUG_LEVEL_ISR)
printk("%s(%d):mgslpc_isr(%d)exit.\n",
__FILE__, __LINE__, info->irq_level);
return IRQ_HANDLED;
}
/* Initialize and start device.
*/
static int startup(MGSLPC_INFO * info, struct tty_struct *tty)
{
int retval = 0;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):startup(%s)\n", __FILE__, __LINE__, info->device_name);
if (info->port.flags & ASYNC_INITIALIZED)
return 0;
if (!info->tx_buf) {
/* allocate a page of memory for a transmit buffer */
info->tx_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
if (!info->tx_buf) {
printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
__FILE__, __LINE__, info->device_name);
return -ENOMEM;
}
}
info->pending_bh = 0;
memset(&info->icount, 0, sizeof(info->icount));
setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
/* Allocate and claim adapter resources */
retval = claim_resources(info);
/* perform existence check and diagnostics */
if (!retval)
retval = adapter_test(info);
if (retval) {
if (capable(CAP_SYS_ADMIN) && tty)
set_bit(TTY_IO_ERROR, &tty->flags);
release_resources(info);
return retval;
}
/* program hardware for current parameters */
mgslpc_change_params(info, tty);
if (tty)
clear_bit(TTY_IO_ERROR, &tty->flags);
info->port.flags |= ASYNC_INITIALIZED;
return 0;
}
/* Called by mgslpc_close() and mgslpc_hangup() to shutdown hardware
*/
static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty)
{
unsigned long flags;
if (!(info->port.flags & ASYNC_INITIALIZED))
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_shutdown(%s)\n",
__FILE__, __LINE__, info->device_name);
/* clear status wait queue because status changes */
/* can't happen after shutting down the hardware */
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
del_timer_sync(&info->tx_timer);
if (info->tx_buf) {
free_page((unsigned long) info->tx_buf);
info->tx_buf = NULL;
}
spin_lock_irqsave(&info->lock, flags);
rx_stop(info);
tx_stop(info);
/* TODO:disable interrupts instead of reset to preserve signal states */
reset_device(info);
if (!tty || tty->termios.c_cflag & HUPCL) {
info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
set_signals(info);
}
spin_unlock_irqrestore(&info->lock, flags);
release_resources(info);
if (tty)
set_bit(TTY_IO_ERROR, &tty->flags);
info->port.flags &= ~ASYNC_INITIALIZED;
}
static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty)
{
unsigned long flags;
spin_lock_irqsave(&info->lock, flags);
rx_stop(info);
tx_stop(info);
info->tx_count = info->tx_put = info->tx_get = 0;
if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
hdlc_mode(info);
else
async_mode(info);
set_signals(info);
info->dcd_chkcount = 0;
info->cts_chkcount = 0;
info->ri_chkcount = 0;
info->dsr_chkcount = 0;
irq_enable(info, CHB, IRQ_DCD | IRQ_CTS);
port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI);
get_signals(info);
if (info->netcount || (tty && (tty->termios.c_cflag & CREAD)))
rx_start(info);
spin_unlock_irqrestore(&info->lock, flags);
}
/* Reconfigure adapter based on new parameters
*/
static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty)
{
unsigned cflag;
int bits_per_char;
if (!tty)
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_change_params(%s)\n",
__FILE__, __LINE__, info->device_name);
cflag = tty->termios.c_cflag;
/* if B0 rate (hangup) specified then negate RTS and DTR */
/* otherwise assert RTS and DTR */
if (cflag & CBAUD)
info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
else
info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
/* byte size and parity */
switch (cflag & CSIZE) {
case CS5: info->params.data_bits = 5; break;
case CS6: info->params.data_bits = 6; break;
case CS7: info->params.data_bits = 7; break;
case CS8: info->params.data_bits = 8; break;
default: info->params.data_bits = 7; break;
}
if (cflag & CSTOPB)
info->params.stop_bits = 2;
else
info->params.stop_bits = 1;
info->params.parity = ASYNC_PARITY_NONE;
if (cflag & PARENB) {
if (cflag & PARODD)
info->params.parity = ASYNC_PARITY_ODD;
else
info->params.parity = ASYNC_PARITY_EVEN;
#ifdef CMSPAR
if (cflag & CMSPAR)
info->params.parity = ASYNC_PARITY_SPACE;
#endif
}
/* calculate number of jiffies to transmit a full
* FIFO (32 bytes) at specified data rate
*/
bits_per_char = info->params.data_bits +
info->params.stop_bits + 1;
/* if port data rate is set to 460800 or less then
* allow tty settings to override, otherwise keep the
* current data rate.
*/
if (info->params.data_rate <= 460800) {
info->params.data_rate = tty_get_baud_rate(tty);
}
if (info->params.data_rate) {
info->timeout = (32*HZ*bits_per_char) /
info->params.data_rate;
}
info->timeout += HZ/50; /* Add .02 seconds of slop */
if (cflag & CRTSCTS)
info->port.flags |= ASYNC_CTS_FLOW;
else
info->port.flags &= ~ASYNC_CTS_FLOW;
if (cflag & CLOCAL)
info->port.flags &= ~ASYNC_CHECK_CD;
else
info->port.flags |= ASYNC_CHECK_CD;
/* process tty input control flags */
info->read_status_mask = 0;
if (I_INPCK(tty))
info->read_status_mask |= BIT7 | BIT6;
if (I_IGNPAR(tty))
info->ignore_status_mask |= BIT7 | BIT6;
mgslpc_program_hw(info, tty);
}
/* Add a character to the transmit buffer
*/
static int mgslpc_put_char(struct tty_struct *tty, unsigned char ch)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO) {
printk("%s(%d):mgslpc_put_char(%d) on %s\n",
__FILE__, __LINE__, ch, info->device_name);
}
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_put_char"))
return 0;
if (!info->tx_buf)
return 0;
spin_lock_irqsave(&info->lock, flags);
if (info->params.mode == MGSL_MODE_ASYNC || !info->tx_active) {
if (info->tx_count < TXBUFSIZE - 1) {
info->tx_buf[info->tx_put++] = ch;
info->tx_put &= TXBUFSIZE-1;
info->tx_count++;
}
}
spin_unlock_irqrestore(&info->lock, flags);
return 1;
}
/* Enable transmitter so remaining characters in the
* transmit buffer are sent.
*/
static void mgslpc_flush_chars(struct tty_struct *tty)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_flush_chars() entry on %s tx_count=%d\n",
__FILE__, __LINE__, info->device_name, info->tx_count);
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_chars"))
return;
if (info->tx_count <= 0 || tty->stopped ||
tty->hw_stopped || !info->tx_buf)
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_flush_chars() entry on %s starting transmitter\n",
__FILE__, __LINE__, info->device_name);
spin_lock_irqsave(&info->lock, flags);
if (!info->tx_active)
tx_start(info, tty);
spin_unlock_irqrestore(&info->lock, flags);
}
/* Send a block of data
*
* Arguments:
*
* tty pointer to tty information structure
* buf pointer to buffer containing send data
* count size of send data in bytes
*
* Returns: number of characters written
*/
static int mgslpc_write(struct tty_struct * tty,
const unsigned char *buf, int count)
{
int c, ret = 0;
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_write(%s) count=%d\n",
__FILE__, __LINE__, info->device_name, count);
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write") ||
!info->tx_buf)
goto cleanup;
if (info->params.mode == MGSL_MODE_HDLC) {
if (count > TXBUFSIZE) {
ret = -EIO;
goto cleanup;
}
if (info->tx_active)
goto cleanup;
else if (info->tx_count)
goto start;
}
for (;;) {
c = min(count,
min(TXBUFSIZE - info->tx_count - 1,
TXBUFSIZE - info->tx_put));
if (c <= 0)
break;
memcpy(info->tx_buf + info->tx_put, buf, c);
spin_lock_irqsave(&info->lock, flags);
info->tx_put = (info->tx_put + c) & (TXBUFSIZE-1);
info->tx_count += c;
spin_unlock_irqrestore(&info->lock, flags);
buf += c;
count -= c;
ret += c;
}
start:
if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
spin_lock_irqsave(&info->lock, flags);
if (!info->tx_active)
tx_start(info, tty);
spin_unlock_irqrestore(&info->lock, flags);
}
cleanup:
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_write(%s) returning=%d\n",
__FILE__, __LINE__, info->device_name, ret);
return ret;
}
/* Return the count of free bytes in transmit buffer
*/
static int mgslpc_write_room(struct tty_struct *tty)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
int ret;
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write_room"))
return 0;
if (info->params.mode == MGSL_MODE_HDLC) {
/* HDLC (frame oriented) mode */
if (info->tx_active)
return 0;
else
return HDLC_MAX_FRAME_SIZE;
} else {
ret = TXBUFSIZE - info->tx_count - 1;
if (ret < 0)
ret = 0;
}
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_write_room(%s)=%d\n",
__FILE__, __LINE__, info->device_name, ret);
return ret;
}
/* Return the count of bytes in transmit buffer
*/
static int mgslpc_chars_in_buffer(struct tty_struct *tty)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
int rc;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_chars_in_buffer(%s)\n",
__FILE__, __LINE__, info->device_name);
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_chars_in_buffer"))
return 0;
if (info->params.mode == MGSL_MODE_HDLC)
rc = info->tx_active ? info->max_frame_size : 0;
else
rc = info->tx_count;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_chars_in_buffer(%s)=%d\n",
__FILE__, __LINE__, info->device_name, rc);
return rc;
}
/* Discard all data in the send buffer
*/
static void mgslpc_flush_buffer(struct tty_struct *tty)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_flush_buffer(%s) entry\n",
__FILE__, __LINE__, info->device_name);
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_buffer"))
return;
spin_lock_irqsave(&info->lock, flags);
info->tx_count = info->tx_put = info->tx_get = 0;
del_timer(&info->tx_timer);
spin_unlock_irqrestore(&info->lock, flags);
wake_up_interruptible(&tty->write_wait);
tty_wakeup(tty);
}
/* Send a high-priority XON/XOFF character
*/
static void mgslpc_send_xchar(struct tty_struct *tty, char ch)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_send_xchar(%s,%d)\n",
__FILE__, __LINE__, info->device_name, ch);
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_send_xchar"))
return;
info->x_char = ch;
if (ch) {
spin_lock_irqsave(&info->lock, flags);
if (!info->tx_enabled)
tx_start(info, tty);
spin_unlock_irqrestore(&info->lock, flags);
}
}
/* Signal remote device to throttle send data (our receive data)
*/
static void mgslpc_throttle(struct tty_struct * tty)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_throttle(%s) entry\n",
__FILE__, __LINE__, info->device_name);
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_throttle"))
return;
if (I_IXOFF(tty))
mgslpc_send_xchar(tty, STOP_CHAR(tty));
if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->lock, flags);
info->serial_signals &= ~SerialSignal_RTS;
set_signals(info);
spin_unlock_irqrestore(&info->lock, flags);
}
}
/* Signal remote device to stop throttling send data (our receive data)
*/
static void mgslpc_unthrottle(struct tty_struct * tty)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_unthrottle(%s) entry\n",
__FILE__, __LINE__, info->device_name);
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_unthrottle"))
return;
if (I_IXOFF(tty)) {
if (info->x_char)
info->x_char = 0;
else
mgslpc_send_xchar(tty, START_CHAR(tty));
}
if (tty->termios.c_cflag & CRTSCTS) {
spin_lock_irqsave(&info->lock, flags);
info->serial_signals |= SerialSignal_RTS;
set_signals(info);
spin_unlock_irqrestore(&info->lock, flags);
}
}
/* get the current serial statistics
*/
static int get_stats(MGSLPC_INFO * info, struct mgsl_icount __user *user_icount)
{
int err;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("get_params(%s)\n", info->device_name);
if (!user_icount) {
memset(&info->icount, 0, sizeof(info->icount));
} else {
COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
if (err)
return -EFAULT;
}
return 0;
}
/* get the current serial parameters
*/
static int get_params(MGSLPC_INFO * info, MGSL_PARAMS __user *user_params)
{
int err;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("get_params(%s)\n", info->device_name);
COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
if (err)
return -EFAULT;
return 0;
}
/* set the serial parameters
*
* Arguments:
*
* info pointer to device instance data
* new_params user buffer containing new serial params
*
* Returns: 0 if success, otherwise error code
*/
static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params, struct tty_struct *tty)
{
unsigned long flags;
MGSL_PARAMS tmp_params;
int err;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):set_params %s\n", __FILE__,__LINE__,
info->device_name);
COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
if (err) {
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):set_params(%s) user buffer copy failed\n",
__FILE__, __LINE__, info->device_name);
return -EFAULT;
}
spin_lock_irqsave(&info->lock, flags);
memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
spin_unlock_irqrestore(&info->lock, flags);
mgslpc_change_params(info, tty);
return 0;
}
static int get_txidle(MGSLPC_INFO * info, int __user *idle_mode)
{
int err;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("get_txidle(%s)=%d\n", info->device_name, info->idle_mode);
COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
if (err)
return -EFAULT;
return 0;
}
static int set_txidle(MGSLPC_INFO * info, int idle_mode)
{
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("set_txidle(%s,%d)\n", info->device_name, idle_mode);
spin_lock_irqsave(&info->lock, flags);
info->idle_mode = idle_mode;
tx_set_idle(info);
spin_unlock_irqrestore(&info->lock, flags);
return 0;
}
static int get_interface(MGSLPC_INFO * info, int __user *if_mode)
{
int err;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("get_interface(%s)=%d\n", info->device_name, info->if_mode);
COPY_TO_USER(err,if_mode, &info->if_mode, sizeof(int));
if (err)
return -EFAULT;
return 0;
}
static int set_interface(MGSLPC_INFO * info, int if_mode)
{
unsigned long flags;
unsigned char val;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("set_interface(%s,%d)\n", info->device_name, if_mode);
spin_lock_irqsave(&info->lock, flags);
info->if_mode = if_mode;
val = read_reg(info, PVR) & 0x0f;
switch (info->if_mode)
{
case MGSL_INTERFACE_RS232: val |= PVR_RS232; break;
case MGSL_INTERFACE_V35: val |= PVR_V35; break;
case MGSL_INTERFACE_RS422: val |= PVR_RS422; break;
}
write_reg(info, PVR, val);
spin_unlock_irqrestore(&info->lock, flags);
return 0;
}
static int set_txenable(MGSLPC_INFO * info, int enable, struct tty_struct *tty)
{
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("set_txenable(%s,%d)\n", info->device_name, enable);
spin_lock_irqsave(&info->lock, flags);
if (enable) {
if (!info->tx_enabled)
tx_start(info, tty);
} else {
if (info->tx_enabled)
tx_stop(info);
}
spin_unlock_irqrestore(&info->lock, flags);
return 0;
}
static int tx_abort(MGSLPC_INFO * info)
{
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("tx_abort(%s)\n", info->device_name);
spin_lock_irqsave(&info->lock, flags);
if (info->tx_active && info->tx_count &&
info->params.mode == MGSL_MODE_HDLC) {
/* clear data count so FIFO is not filled on next IRQ.
* This results in underrun and abort transmission.
*/
info->tx_count = info->tx_put = info->tx_get = 0;
info->tx_aborting = true;
}
spin_unlock_irqrestore(&info->lock, flags);
return 0;
}
static int set_rxenable(MGSLPC_INFO * info, int enable)
{
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("set_rxenable(%s,%d)\n", info->device_name, enable);
spin_lock_irqsave(&info->lock, flags);
if (enable) {
if (!info->rx_enabled)
rx_start(info);
} else {
if (info->rx_enabled)
rx_stop(info);
}
spin_unlock_irqrestore(&info->lock, flags);
return 0;
}
/* wait for specified event to occur
*
* Arguments: info pointer to device instance data
* mask pointer to bitmask of events to wait for
* Return Value: 0 if successful and bit mask updated with
* of events triggerred,
* otherwise error code
*/
static int wait_events(MGSLPC_INFO * info, int __user *mask_ptr)
{
unsigned long flags;
int s;
int rc=0;
struct mgsl_icount cprev, cnow;
int events;
int mask;
struct _input_signal_events oldsigs, newsigs;
DECLARE_WAITQUEUE(wait, current);
COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
if (rc)
return -EFAULT;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("wait_events(%s,%d)\n", info->device_name, mask);
spin_lock_irqsave(&info->lock, flags);
/* return immediately if state matches requested events */
get_signals(info);
s = info->serial_signals;
events = mask &
( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
if (events) {
spin_unlock_irqrestore(&info->lock, flags);
goto exit;
}
/* save current irq counts */
cprev = info->icount;
oldsigs = info->input_signal_events;
if ((info->params.mode == MGSL_MODE_HDLC) &&
(mask & MgslEvent_ExitHuntMode))
irq_enable(info, CHA, IRQ_EXITHUNT);
set_current_state(TASK_INTERRUPTIBLE);
add_wait_queue(&info->event_wait_q, &wait);
spin_unlock_irqrestore(&info->lock, flags);
for(;;) {
schedule();
if (signal_pending(current)) {
rc = -ERESTARTSYS;
break;
}
/* get current irq counts */
spin_lock_irqsave(&info->lock, flags);
cnow = info->icount;
newsigs = info->input_signal_events;
set_current_state(TASK_INTERRUPTIBLE);
spin_unlock_irqrestore(&info->lock, flags);
/* if no change, wait aborted for some reason */
if (newsigs.dsr_up == oldsigs.dsr_up &&
newsigs.dsr_down == oldsigs.dsr_down &&
newsigs.dcd_up == oldsigs.dcd_up &&
newsigs.dcd_down == oldsigs.dcd_down &&
newsigs.cts_up == oldsigs.cts_up &&
newsigs.cts_down == oldsigs.cts_down &&
newsigs.ri_up == oldsigs.ri_up &&
newsigs.ri_down == oldsigs.ri_down &&
cnow.exithunt == cprev.exithunt &&
cnow.rxidle == cprev.rxidle) {
rc = -EIO;
break;
}
events = mask &
( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
(newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
(newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
(newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
(newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
(newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
(newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
(newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
(cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
(cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
if (events)
break;
cprev = cnow;
oldsigs = newsigs;
}
remove_wait_queue(&info->event_wait_q, &wait);
set_current_state(TASK_RUNNING);
if (mask & MgslEvent_ExitHuntMode) {
spin_lock_irqsave(&info->lock, flags);
if (!waitqueue_active(&info->event_wait_q))
irq_disable(info, CHA, IRQ_EXITHUNT);
spin_unlock_irqrestore(&info->lock, flags);
}
exit:
if (rc == 0)
PUT_USER(rc, events, mask_ptr);
return rc;
}
static int modem_input_wait(MGSLPC_INFO *info,int arg)
{
unsigned long flags;
int rc;
struct mgsl_icount cprev, cnow;
DECLARE_WAITQUEUE(wait, current);
/* save current irq counts */
spin_lock_irqsave(&info->lock, flags);
cprev = info->icount;
add_wait_queue(&info->status_event_wait_q, &wait);
set_current_state(TASK_INTERRUPTIBLE);
spin_unlock_irqrestore(&info->lock, flags);
for(;;) {
schedule();
if (signal_pending(current)) {
rc = -ERESTARTSYS;
break;
}
/* get new irq counts */
spin_lock_irqsave(&info->lock, flags);
cnow = info->icount;
set_current_state(TASK_INTERRUPTIBLE);
spin_unlock_irqrestore(&info->lock, flags);
/* if no change, wait aborted for some reason */
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
rc = -EIO;
break;
}
/* check for change in caller specified modem input */
if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
(arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
(arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
(arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
rc = 0;
break;
}
cprev = cnow;
}
remove_wait_queue(&info->status_event_wait_q, &wait);
set_current_state(TASK_RUNNING);
return rc;
}
/* return the state of the serial control and status signals
*/
static int tiocmget(struct tty_struct *tty)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
unsigned int result;
unsigned long flags;
spin_lock_irqsave(&info->lock, flags);
get_signals(info);
spin_unlock_irqrestore(&info->lock, flags);
result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s tiocmget() value=%08X\n",
__FILE__, __LINE__, info->device_name, result);
return result;
}
/* set modem control signals (DTR/RTS)
*/
static int tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s tiocmset(%x,%x)\n",
__FILE__, __LINE__, info->device_name, set, clear);
if (set & TIOCM_RTS)
info->serial_signals |= SerialSignal_RTS;
if (set & TIOCM_DTR)
info->serial_signals |= SerialSignal_DTR;
if (clear & TIOCM_RTS)
info->serial_signals &= ~SerialSignal_RTS;
if (clear & TIOCM_DTR)
info->serial_signals &= ~SerialSignal_DTR;
spin_lock_irqsave(&info->lock, flags);
set_signals(info);
spin_unlock_irqrestore(&info->lock, flags);
return 0;
}
/* Set or clear transmit break condition
*
* Arguments: tty pointer to tty instance data
* break_state -1=set break condition, 0=clear
*/
static int mgslpc_break(struct tty_struct *tty, int break_state)
{
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_break(%s,%d)\n",
__FILE__, __LINE__, info->device_name, break_state);
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_break"))
return -EINVAL;
spin_lock_irqsave(&info->lock, flags);
if (break_state == -1)
set_reg_bits(info, CHA+DAFO, BIT6);
else
clear_reg_bits(info, CHA+DAFO, BIT6);
spin_unlock_irqrestore(&info->lock, flags);
return 0;
}
static int mgslpc_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
struct mgsl_icount cnow; /* kernel counter temps */
unsigned long flags;
spin_lock_irqsave(&info->lock, flags);
cnow = info->icount;
spin_unlock_irqrestore(&info->lock, flags);
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
return 0;
}
/* Service an IOCTL request
*
* Arguments:
*
* tty pointer to tty instance data
* cmd IOCTL command code
* arg command argument/context
*
* Return Value: 0 if success, otherwise error code
*/
static int mgslpc_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
void __user *argp = (void __user *)arg;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__, __LINE__,
info->device_name, cmd);
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_ioctl"))
return -ENODEV;
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
(cmd != TIOCMIWAIT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
switch (cmd) {
case MGSL_IOCGPARAMS:
return get_params(info, argp);
case MGSL_IOCSPARAMS:
return set_params(info, argp, tty);
case MGSL_IOCGTXIDLE:
return get_txidle(info, argp);
case MGSL_IOCSTXIDLE:
return set_txidle(info, (int)arg);
case MGSL_IOCGIF:
return get_interface(info, argp);
case MGSL_IOCSIF:
return set_interface(info,(int)arg);
case MGSL_IOCTXENABLE:
return set_txenable(info,(int)arg, tty);
case MGSL_IOCRXENABLE:
return set_rxenable(info,(int)arg);
case MGSL_IOCTXABORT:
return tx_abort(info);
case MGSL_IOCGSTATS:
return get_stats(info, argp);
case MGSL_IOCWAITEVENT:
return wait_events(info, argp);
case TIOCMIWAIT:
return modem_input_wait(info,(int)arg);
default:
return -ENOIOCTLCMD;
}
return 0;
}
/* Set new termios settings
*
* Arguments:
*
* tty pointer to tty structure
* termios pointer to buffer to hold returned old termios
*/
static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_set_termios %s\n", __FILE__, __LINE__,
tty->driver->name);
/* just return if nothing has changed */
if ((tty->termios.c_cflag == old_termios->c_cflag)
&& (RELEVANT_IFLAG(tty->termios.c_iflag)
== RELEVANT_IFLAG(old_termios->c_iflag)))
return;
mgslpc_change_params(info, tty);
/* Handle transition to B0 status */
if (old_termios->c_cflag & CBAUD &&
!(tty->termios.c_cflag & CBAUD)) {
info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
spin_lock_irqsave(&info->lock, flags);
set_signals(info);
spin_unlock_irqrestore(&info->lock, flags);
}
/* Handle transition away from B0 status */
if (!(old_termios->c_cflag & CBAUD) &&
tty->termios.c_cflag & CBAUD) {
info->serial_signals |= SerialSignal_DTR;
if (!(tty->termios.c_cflag & CRTSCTS) ||
!test_bit(TTY_THROTTLED, &tty->flags)) {
info->serial_signals |= SerialSignal_RTS;
}
spin_lock_irqsave(&info->lock, flags);
set_signals(info);
spin_unlock_irqrestore(&info->lock, flags);
}
/* Handle turning off CRTSCTS */
if (old_termios->c_cflag & CRTSCTS &&
!(tty->termios.c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
tx_release(tty);
}
}
static void mgslpc_close(struct tty_struct *tty, struct file * filp)
{
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
struct tty_port *port = &info->port;
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_close"))
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_close(%s) entry, count=%d\n",
__FILE__, __LINE__, info->device_name, port->count);
WARN_ON(!port->count);
if (tty_port_close_start(port, tty, filp) == 0)
goto cleanup;
if (port->flags & ASYNC_INITIALIZED)
mgslpc_wait_until_sent(tty, info->timeout);
mgslpc_flush_buffer(tty);
tty_ldisc_flush(tty);
shutdown(info, tty);
tty_port_close_end(port, tty);
tty_port_tty_set(port, NULL);
cleanup:
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_close(%s) exit, count=%d\n", __FILE__, __LINE__,
tty->driver->name, port->count);
}
/* Wait until the transmitter is empty.
*/
static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout)
{
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
unsigned long orig_jiffies, char_time;
if (!info)
return;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_wait_until_sent(%s) entry\n",
__FILE__, __LINE__, info->device_name);
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_wait_until_sent"))
return;
if (!(info->port.flags & ASYNC_INITIALIZED))
goto exit;
orig_jiffies = jiffies;
/* Set check interval to 1/5 of estimated time to
* send a character, and make it at least 1. The check
* interval should also be less than the timeout.
* Note: use tight timings here to satisfy the NIST-PCTS.
*/
if (info->params.data_rate) {
char_time = info->timeout/(32 * 5);
if (!char_time)
char_time++;
} else
char_time = 1;
if (timeout)
char_time = min_t(unsigned long, char_time, timeout);
if (info->params.mode == MGSL_MODE_HDLC) {
while (info->tx_active) {
msleep_interruptible(jiffies_to_msecs(char_time));
if (signal_pending(current))
break;
if (timeout && time_after(jiffies, orig_jiffies + timeout))
break;
}
} else {
while ((info->tx_count || info->tx_active) &&
info->tx_enabled) {
msleep_interruptible(jiffies_to_msecs(char_time));
if (signal_pending(current))
break;
if (timeout && time_after(jiffies, orig_jiffies + timeout))
break;
}
}
exit:
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_wait_until_sent(%s) exit\n",
__FILE__, __LINE__, info->device_name);
}
/* Called by tty_hangup() when a hangup is signaled.
* This is the same as closing all open files for the port.
*/
static void mgslpc_hangup(struct tty_struct *tty)
{
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_hangup(%s)\n",
__FILE__, __LINE__, info->device_name);
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_hangup"))
return;
mgslpc_flush_buffer(tty);
shutdown(info, tty);
tty_port_hangup(&info->port);
}
static int carrier_raised(struct tty_port *port)
{
MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port);
unsigned long flags;
spin_lock_irqsave(&info->lock, flags);
get_signals(info);
spin_unlock_irqrestore(&info->lock, flags);
if (info->serial_signals & SerialSignal_DCD)
return 1;
return 0;
}
static void dtr_rts(struct tty_port *port, int onoff)
{
MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port);
unsigned long flags;
spin_lock_irqsave(&info->lock, flags);
if (onoff)
info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
else
info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
set_signals(info);
spin_unlock_irqrestore(&info->lock, flags);
}
static int mgslpc_open(struct tty_struct *tty, struct file * filp)
{
MGSLPC_INFO *info;
struct tty_port *port;
int retval, line;
unsigned long flags;
/* verify range of specified line number */
line = tty->index;
if (line >= mgslpc_device_count) {
printk("%s(%d):mgslpc_open with invalid line #%d.\n",
__FILE__, __LINE__, line);
return -ENODEV;
}
/* find the info structure for the specified line */
info = mgslpc_device_list;
while(info && info->line != line)
info = info->next_device;
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_open"))
return -ENODEV;
port = &info->port;
tty->driver_data = info;
tty_port_tty_set(port, tty);
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_open(%s), old ref count = %d\n",
__FILE__, __LINE__, tty->driver->name, port->count);
/* If port is closing, signal caller to try again */
if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING){
if (port->flags & ASYNC_CLOSING)
interruptible_sleep_on(&port->close_wait);
retval = ((port->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
goto cleanup;
}
port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
spin_lock_irqsave(&info->netlock, flags);
if (info->netcount) {
retval = -EBUSY;
spin_unlock_irqrestore(&info->netlock, flags);
goto cleanup;
}
spin_lock(&port->lock);
port->count++;
spin_unlock(&port->lock);
spin_unlock_irqrestore(&info->netlock, flags);
if (port->count == 1) {
/* 1st open on this device, init hardware */
retval = startup(info, tty);
if (retval < 0)
goto cleanup;
}
retval = tty_port_block_til_ready(&info->port, tty, filp);
if (retval) {
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready(%s) returned %d\n",
__FILE__, __LINE__, info->device_name, retval);
goto cleanup;
}
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgslpc_open(%s) success\n",
__FILE__, __LINE__, info->device_name);
retval = 0;
cleanup:
return retval;
}
/*
* /proc fs routines....
*/
static inline void line_info(struct seq_file *m, MGSLPC_INFO *info)
{
char stat_buf[30];
unsigned long flags;
seq_printf(m, "%s:io:%04X irq:%d",
info->device_name, info->io_base, info->irq_level);
/* output current serial signal states */
spin_lock_irqsave(&info->lock, flags);
get_signals(info);
spin_unlock_irqrestore(&info->lock, flags);
stat_buf[0] = 0;
stat_buf[1] = 0;
if (info->serial_signals & SerialSignal_RTS)
strcat(stat_buf, "|RTS");
if (info->serial_signals & SerialSignal_CTS)
strcat(stat_buf, "|CTS");
if (info->serial_signals & SerialSignal_DTR)
strcat(stat_buf, "|DTR");
if (info->serial_signals & SerialSignal_DSR)
strcat(stat_buf, "|DSR");
if (info->serial_signals & SerialSignal_DCD)
strcat(stat_buf, "|CD");
if (info->serial_signals & SerialSignal_RI)
strcat(stat_buf, "|RI");
if (info->params.mode == MGSL_MODE_HDLC) {
seq_printf(m, " HDLC txok:%d rxok:%d",
info->icount.txok, info->icount.rxok);
if (info->icount.txunder)
seq_printf(m, " txunder:%d", info->icount.txunder);
if (info->icount.txabort)
seq_printf(m, " txabort:%d", info->icount.txabort);
if (info->icount.rxshort)
seq_printf(m, " rxshort:%d", info->icount.rxshort);
if (info->icount.rxlong)
seq_printf(m, " rxlong:%d", info->icount.rxlong);
if (info->icount.rxover)
seq_printf(m, " rxover:%d", info->icount.rxover);
if (info->icount.rxcrc)
seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
} else {
seq_printf(m, " ASYNC tx:%d rx:%d",
info->icount.tx, info->icount.rx);
if (info->icount.frame)
seq_printf(m, " fe:%d", info->icount.frame);
if (info->icount.parity)
seq_printf(m, " pe:%d", info->icount.parity);
if (info->icount.brk)
seq_printf(m, " brk:%d", info->icount.brk);
if (info->icount.overrun)
seq_printf(m, " oe:%d", info->icount.overrun);
}
/* Append serial signal status to end */
seq_printf(m, " %s\n", stat_buf+1);
seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
info->tx_active,info->bh_requested,info->bh_running,
info->pending_bh);
}
/* Called to print information about devices
*/
static int mgslpc_proc_show(struct seq_file *m, void *v)
{
MGSLPC_INFO *info;
seq_printf(m, "synclink driver:%s\n", driver_version);
info = mgslpc_device_list;
while (info) {
line_info(m, info);
info = info->next_device;
}
return 0;
}
static int mgslpc_proc_open(struct inode *inode, struct file *file)
{
return single_open(file, mgslpc_proc_show, NULL);
}
static const struct file_operations mgslpc_proc_fops = {
.owner = THIS_MODULE,
.open = mgslpc_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int rx_alloc_buffers(MGSLPC_INFO *info)
{
/* each buffer has header and data */
info->rx_buf_size = sizeof(RXBUF) + info->max_frame_size;
/* calculate total allocation size for 8 buffers */
info->rx_buf_total_size = info->rx_buf_size * 8;
/* limit total allocated memory */
if (info->rx_buf_total_size > 0x10000)
info->rx_buf_total_size = 0x10000;
/* calculate number of buffers */
info->rx_buf_count = info->rx_buf_total_size / info->rx_buf_size;
info->rx_buf = kmalloc(info->rx_buf_total_size, GFP_KERNEL);
if (info->rx_buf == NULL)
return -ENOMEM;
/* unused flag buffer to satisfy receive_buf calling interface */
info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL);
if (!info->flag_buf) {
kfree(info->rx_buf);
info->rx_buf = NULL;
return -ENOMEM;
}
rx_reset_buffers(info);
return 0;
}
static void rx_free_buffers(MGSLPC_INFO *info)
{
kfree(info->rx_buf);
info->rx_buf = NULL;
kfree(info->flag_buf);
info->flag_buf = NULL;
}
static int claim_resources(MGSLPC_INFO *info)
{
if (rx_alloc_buffers(info) < 0) {
printk("Can't allocate rx buffer %s\n", info->device_name);
release_resources(info);
return -ENODEV;
}
return 0;
}
static void release_resources(MGSLPC_INFO *info)
{
if (debug_level >= DEBUG_LEVEL_INFO)
printk("release_resources(%s)\n", info->device_name);
rx_free_buffers(info);
}
/* Add the specified device instance data structure to the
* global linked list of devices and increment the device count.
*
* Arguments: info pointer to device instance data
*/
static int mgslpc_add_device(MGSLPC_INFO *info)
{
MGSLPC_INFO *current_dev = NULL;
struct device *tty_dev;
int ret;
info->next_device = NULL;
info->line = mgslpc_device_count;
sprintf(info->device_name,"ttySLP%d",info->line);
if (info->line < MAX_DEVICE_COUNT) {
if (maxframe[info->line])
info->max_frame_size = maxframe[info->line];
}
mgslpc_device_count++;
if (!mgslpc_device_list)
mgslpc_device_list = info;
else {
current_dev = mgslpc_device_list;
while (current_dev->next_device)
current_dev = current_dev->next_device;
current_dev->next_device = info;
}
if (info->max_frame_size < 4096)
info->max_frame_size = 4096;
else if (info->max_frame_size > 65535)
info->max_frame_size = 65535;
printk("SyncLink PC Card %s:IO=%04X IRQ=%d\n",
info->device_name, info->io_base, info->irq_level);
#if SYNCLINK_GENERIC_HDLC
ret = hdlcdev_init(info);
if (ret != 0)
goto failed;
#endif
tty_dev = tty_port_register_device(&info->port, serial_driver, info->line,
&info->p_dev->dev);
if (IS_ERR(tty_dev)) {
ret = PTR_ERR(tty_dev);
#if SYNCLINK_GENERIC_HDLC
hdlcdev_exit(info);
#endif
goto failed;
}
return 0;
failed:
if (current_dev)
current_dev->next_device = NULL;
else
mgslpc_device_list = NULL;
mgslpc_device_count--;
return ret;
}
static void mgslpc_remove_device(MGSLPC_INFO *remove_info)
{
MGSLPC_INFO *info = mgslpc_device_list;
MGSLPC_INFO *last = NULL;
while(info) {
if (info == remove_info) {
if (last)
last->next_device = info->next_device;
else
mgslpc_device_list = info->next_device;
tty_unregister_device(serial_driver, info->line);
#if SYNCLINK_GENERIC_HDLC
hdlcdev_exit(info);
#endif
release_resources(info);
tty_port_destroy(&info->port);
kfree(info);
mgslpc_device_count--;
return;
}
last = info;
info = info->next_device;
}
}
static const struct pcmcia_device_id mgslpc_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x02c5, 0x0050),
PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, mgslpc_ids);
static struct pcmcia_driver mgslpc_driver = {
.owner = THIS_MODULE,
.name = "synclink_cs",
.probe = mgslpc_probe,
.remove = mgslpc_detach,
.id_table = mgslpc_ids,
.suspend = mgslpc_suspend,
.resume = mgslpc_resume,
};
static const struct tty_operations mgslpc_ops = {
.open = mgslpc_open,
.close = mgslpc_close,
.write = mgslpc_write,
.put_char = mgslpc_put_char,
.flush_chars = mgslpc_flush_chars,
.write_room = mgslpc_write_room,
.chars_in_buffer = mgslpc_chars_in_buffer,
.flush_buffer = mgslpc_flush_buffer,
.ioctl = mgslpc_ioctl,
.throttle = mgslpc_throttle,
.unthrottle = mgslpc_unthrottle,
.send_xchar = mgslpc_send_xchar,
.break_ctl = mgslpc_break,
.wait_until_sent = mgslpc_wait_until_sent,
.set_termios = mgslpc_set_termios,
.stop = tx_pause,
.start = tx_release,
.hangup = mgslpc_hangup,
.tiocmget = tiocmget,
.tiocmset = tiocmset,
.get_icount = mgslpc_get_icount,
.proc_fops = &mgslpc_proc_fops,
};
static int __init synclink_cs_init(void)
{
int rc;
if (break_on_load) {
mgslpc_get_text_ptr();
BREAKPOINT();
}
serial_driver = tty_alloc_driver(MAX_DEVICE_COUNT,
TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV);
if (IS_ERR(serial_driver)) {
rc = PTR_ERR(serial_driver);
goto err;
}
/* Initialize the tty_driver structure */
serial_driver->driver_name = "synclink_cs";
serial_driver->name = "ttySLP";
serial_driver->major = ttymajor;
serial_driver->minor_start = 64;
serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
serial_driver->subtype = SERIAL_TYPE_NORMAL;
serial_driver->init_termios = tty_std_termios;
serial_driver->init_termios.c_cflag =
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
tty_set_operations(serial_driver, &mgslpc_ops);
rc = tty_register_driver(serial_driver);
if (rc < 0) {
printk(KERN_ERR "%s(%d):Couldn't register serial driver\n",
__FILE__, __LINE__);
goto err_put_tty;
}
rc = pcmcia_register_driver(&mgslpc_driver);
if (rc < 0)
goto err_unreg_tty;
printk(KERN_INFO "%s %s, tty major#%d\n", driver_name, driver_version,
serial_driver->major);
return 0;
err_unreg_tty:
tty_unregister_driver(serial_driver);
err_put_tty:
put_tty_driver(serial_driver);
err:
return rc;
}
static void __exit synclink_cs_exit(void)
{
pcmcia_unregister_driver(&mgslpc_driver);
tty_unregister_driver(serial_driver);
put_tty_driver(serial_driver);
}
module_init(synclink_cs_init);
module_exit(synclink_cs_exit);
static void mgslpc_set_rate(MGSLPC_INFO *info, unsigned char channel, unsigned int rate)
{
unsigned int M, N;
unsigned char val;
/* note:standard BRG mode is broken in V3.2 chip
* so enhanced mode is always used
*/
if (rate) {
N = 3686400 / rate;
if (!N)
N = 1;
N >>= 1;
for (M = 1; N > 64 && M < 16; M++)
N >>= 1;
N--;
/* BGR[5..0] = N
* BGR[9..6] = M
* BGR[7..0] contained in BGR register
* BGR[9..8] contained in CCR2[7..6]
* divisor = (N+1)*2^M
*
* Note: M *must* not be zero (causes asymetric duty cycle)
*/
write_reg(info, (unsigned char) (channel + BGR),
(unsigned char) ((M << 6) + N));
val = read_reg(info, (unsigned char) (channel + CCR2)) & 0x3f;
val |= ((M << 4) & 0xc0);
write_reg(info, (unsigned char) (channel + CCR2), val);
}
}
/* Enabled the AUX clock output at the specified frequency.
*/
static void enable_auxclk(MGSLPC_INFO *info)
{
unsigned char val;
/* MODE
*
* 07..06 MDS[1..0] 10 = transparent HDLC mode
* 05 ADM Address Mode, 0 = no addr recognition
* 04 TMD Timer Mode, 0 = external
* 03 RAC Receiver Active, 0 = inactive
* 02 RTS 0=RTS active during xmit, 1=RTS always active
* 01 TRS Timer Resolution, 1=512
* 00 TLP Test Loop, 0 = no loop
*
* 1000 0010
*/
val = 0x82;
/* channel B RTS is used to enable AUXCLK driver on SP505 */
if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
val |= BIT2;
write_reg(info, CHB + MODE, val);
/* CCR0
*
* 07 PU Power Up, 1=active, 0=power down
* 06 MCE Master Clock Enable, 1=enabled
* 05 Reserved, 0
* 04..02 SC[2..0] Encoding
* 01..00 SM[1..0] Serial Mode, 00=HDLC
*
* 11000000
*/
write_reg(info, CHB + CCR0, 0xc0);
/* CCR1
*
* 07 SFLG Shared Flag, 0 = disable shared flags
* 06 GALP Go Active On Loop, 0 = not used
* 05 GLP Go On Loop, 0 = not used
* 04 ODS Output Driver Select, 1=TxD is push-pull output
* 03 ITF Interframe Time Fill, 0=mark, 1=flag
* 02..00 CM[2..0] Clock Mode
*
* 0001 0111
*/
write_reg(info, CHB + CCR1, 0x17);
/* CCR2 (Channel B)
*
* 07..06 BGR[9..8] Baud rate bits 9..8
* 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
* 04 SSEL Clock source select, 1=submode b
* 03 TOE 0=TxCLK is input, 1=TxCLK is output
* 02 RWX Read/Write Exchange 0=disabled
* 01 C32, CRC select, 0=CRC-16, 1=CRC-32
* 00 DIV, data inversion 0=disabled, 1=enabled
*
* 0011 1000
*/
if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
write_reg(info, CHB + CCR2, 0x38);
else
write_reg(info, CHB + CCR2, 0x30);
/* CCR4
*
* 07 MCK4 Master Clock Divide by 4, 1=enabled
* 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
* 05 TST1 Test Pin, 0=normal operation
* 04 ICD Ivert Carrier Detect, 1=enabled (active low)
* 03..02 Reserved, must be 0
* 01..00 RFT[1..0] RxFIFO Threshold 00=32 bytes
*
* 0101 0000
*/
write_reg(info, CHB + CCR4, 0x50);
/* if auxclk not enabled, set internal BRG so
* CTS transitions can be detected (requires TxC)
*/
if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
mgslpc_set_rate(info, CHB, info->params.clock_speed);
else
mgslpc_set_rate(info, CHB, 921600);
}
static void loopback_enable(MGSLPC_INFO *info)
{
unsigned char val;
/* CCR1:02..00 CM[2..0] Clock Mode = 111 (clock mode 7) */
val = read_reg(info, CHA + CCR1) | (BIT2 | BIT1 | BIT0);
write_reg(info, CHA + CCR1, val);
/* CCR2:04 SSEL Clock source select, 1=submode b */
val = read_reg(info, CHA + CCR2) | (BIT4 | BIT5);
write_reg(info, CHA + CCR2, val);
/* set LinkSpeed if available, otherwise default to 2Mbps */
if (info->params.clock_speed)
mgslpc_set_rate(info, CHA, info->params.clock_speed);
else
mgslpc_set_rate(info, CHA, 1843200);
/* MODE:00 TLP Test Loop, 1=loopback enabled */
val = read_reg(info, CHA + MODE) | BIT0;
write_reg(info, CHA + MODE, val);
}
static void hdlc_mode(MGSLPC_INFO *info)
{
unsigned char val;
unsigned char clkmode, clksubmode;
/* disable all interrupts */
irq_disable(info, CHA, 0xffff);
irq_disable(info, CHB, 0xffff);
port_irq_disable(info, 0xff);
/* assume clock mode 0a, rcv=RxC xmt=TxC */
clkmode = clksubmode = 0;
if (info->params.flags & HDLC_FLAG_RXC_DPLL
&& info->params.flags & HDLC_FLAG_TXC_DPLL) {
/* clock mode 7a, rcv = DPLL, xmt = DPLL */
clkmode = 7;
} else if (info->params.flags & HDLC_FLAG_RXC_BRG
&& info->params.flags & HDLC_FLAG_TXC_BRG) {
/* clock mode 7b, rcv = BRG, xmt = BRG */
clkmode = 7;
clksubmode = 1;
} else if (info->params.flags & HDLC_FLAG_RXC_DPLL) {
if (info->params.flags & HDLC_FLAG_TXC_BRG) {
/* clock mode 6b, rcv = DPLL, xmt = BRG/16 */
clkmode = 6;
clksubmode = 1;
} else {
/* clock mode 6a, rcv = DPLL, xmt = TxC */
clkmode = 6;
}
} else if (info->params.flags & HDLC_FLAG_TXC_BRG) {
/* clock mode 0b, rcv = RxC, xmt = BRG */
clksubmode = 1;
}
/* MODE
*
* 07..06 MDS[1..0] 10 = transparent HDLC mode
* 05 ADM Address Mode, 0 = no addr recognition
* 04 TMD Timer Mode, 0 = external
* 03 RAC Receiver Active, 0 = inactive
* 02 RTS 0=RTS active during xmit, 1=RTS always active
* 01 TRS Timer Resolution, 1=512
* 00 TLP Test Loop, 0 = no loop
*
* 1000 0010
*/
val = 0x82;
if (info->params.loopback)
val |= BIT0;
/* preserve RTS state */
if (info->serial_signals & SerialSignal_RTS)
val |= BIT2;
write_reg(info, CHA + MODE, val);
/* CCR0
*
* 07 PU Power Up, 1=active, 0=power down
* 06 MCE Master Clock Enable, 1=enabled
* 05 Reserved, 0
* 04..02 SC[2..0] Encoding
* 01..00 SM[1..0] Serial Mode, 00=HDLC
*
* 11000000
*/
val = 0xc0;
switch (info->params.encoding)
{
case HDLC_ENCODING_NRZI:
val |= BIT3;
break;
case HDLC_ENCODING_BIPHASE_SPACE:
val |= BIT4;
break; // FM0
case HDLC_ENCODING_BIPHASE_MARK:
val |= BIT4 | BIT2;
break; // FM1
case HDLC_ENCODING_BIPHASE_LEVEL:
val |= BIT4 | BIT3;
break; // Manchester
}
write_reg(info, CHA + CCR0, val);
/* CCR1
*
* 07 SFLG Shared Flag, 0 = disable shared flags
* 06 GALP Go Active On Loop, 0 = not used
* 05 GLP Go On Loop, 0 = not used
* 04 ODS Output Driver Select, 1=TxD is push-pull output
* 03 ITF Interframe Time Fill, 0=mark, 1=flag
* 02..00 CM[2..0] Clock Mode
*
* 0001 0000
*/
val = 0x10 + clkmode;
write_reg(info, CHA + CCR1, val);
/* CCR2
*
* 07..06 BGR[9..8] Baud rate bits 9..8
* 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
* 04 SSEL Clock source select, 1=submode b
* 03 TOE 0=TxCLK is input, 0=TxCLK is input
* 02 RWX Read/Write Exchange 0=disabled
* 01 C32, CRC select, 0=CRC-16, 1=CRC-32
* 00 DIV, data inversion 0=disabled, 1=enabled
*
* 0000 0000
*/
val = 0x00;
if (clkmode == 2 || clkmode == 3 || clkmode == 6
|| clkmode == 7 || (clkmode == 0 && clksubmode == 1))
val |= BIT5;
if (clksubmode)
val |= BIT4;
if (info->params.crc_type == HDLC_CRC_32_CCITT)
val |= BIT1;
if (info->params.encoding == HDLC_ENCODING_NRZB)
val |= BIT0;
write_reg(info, CHA + CCR2, val);
/* CCR3
*
* 07..06 PRE[1..0] Preamble count 00=1, 01=2, 10=4, 11=8
* 05 EPT Enable preamble transmission, 1=enabled
* 04 RADD Receive address pushed to FIFO, 0=disabled
* 03 CRL CRC Reset Level, 0=FFFF
* 02 RCRC Rx CRC 0=On 1=Off
* 01 TCRC Tx CRC 0=On 1=Off
* 00 PSD DPLL Phase Shift Disable
*
* 0000 0000
*/
val = 0x00;
if (info->params.crc_type == HDLC_CRC_NONE)
val |= BIT2 | BIT1;
if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
val |= BIT5;
switch (info->params.preamble_length)
{
case HDLC_PREAMBLE_LENGTH_16BITS:
val |= BIT6;
break;
case HDLC_PREAMBLE_LENGTH_32BITS:
val |= BIT6;
break;
case HDLC_PREAMBLE_LENGTH_64BITS:
val |= BIT7 | BIT6;
break;
}
write_reg(info, CHA + CCR3, val);
/* PRE - Preamble pattern */
val = 0;
switch (info->params.preamble)
{
case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
case HDLC_PREAMBLE_PATTERN_10: val = 0xaa; break;
case HDLC_PREAMBLE_PATTERN_01: val = 0x55; break;
case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break;
}
write_reg(info, CHA + PRE, val);
/* CCR4
*
* 07 MCK4 Master Clock Divide by 4, 1=enabled
* 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
* 05 TST1 Test Pin, 0=normal operation
* 04 ICD Ivert Carrier Detect, 1=enabled (active low)
* 03..02 Reserved, must be 0
* 01..00 RFT[1..0] RxFIFO Threshold 00=32 bytes
*
* 0101 0000
*/
val = 0x50;
write_reg(info, CHA + CCR4, val);
if (info->params.flags & HDLC_FLAG_RXC_DPLL)
mgslpc_set_rate(info, CHA, info->params.clock_speed * 16);
else
mgslpc_set_rate(info, CHA, info->params.clock_speed);
/* RLCR Receive length check register
*
* 7 1=enable receive length check
* 6..0 Max frame length = (RL + 1) * 32
*/
write_reg(info, CHA + RLCR, 0);
/* XBCH Transmit Byte Count High
*
* 07 DMA mode, 0 = interrupt driven
* 06 NRM, 0=ABM (ignored)
* 05 CAS Carrier Auto Start
* 04 XC Transmit Continuously (ignored)
* 03..00 XBC[10..8] Transmit byte count bits 10..8
*
* 0000 0000
*/
val = 0x00;
if (info->params.flags & HDLC_FLAG_AUTO_DCD)
val |= BIT5;
write_reg(info, CHA + XBCH, val);
enable_auxclk(info);
if (info->params.loopback || info->testing_irq)
loopback_enable(info);
if (info->params.flags & HDLC_FLAG_AUTO_CTS)
{
irq_enable(info, CHB, IRQ_CTS);
/* PVR[3] 1=AUTO CTS active */
set_reg_bits(info, CHA + PVR, BIT3);
} else
clear_reg_bits(info, CHA + PVR, BIT3);
irq_enable(info, CHA,
IRQ_RXEOM | IRQ_RXFIFO | IRQ_ALLSENT |
IRQ_UNDERRUN | IRQ_TXFIFO);
issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
wait_command_complete(info, CHA);
read_reg16(info, CHA + ISR); /* clear pending IRQs */
/* Master clock mode enabled above to allow reset commands
* to complete even if no data clocks are present.
*
* Disable master clock mode for normal communications because
* V3.2 of the ESCC2 has a bug that prevents the transmit all sent
* IRQ when in master clock mode.
*
* Leave master clock mode enabled for IRQ test because the
* timer IRQ used by the test can only happen in master clock mode.
*/
if (!info->testing_irq)
clear_reg_bits(info, CHA + CCR0, BIT6);
tx_set_idle(info);
tx_stop(info);
rx_stop(info);
}
static void rx_stop(MGSLPC_INFO *info)
{
if (debug_level >= DEBUG_LEVEL_ISR)
printk("%s(%d):rx_stop(%s)\n",
__FILE__, __LINE__, info->device_name);
/* MODE:03 RAC Receiver Active, 0=inactive */
clear_reg_bits(info, CHA + MODE, BIT3);
info->rx_enabled = false;
info->rx_overflow = false;
}
static void rx_start(MGSLPC_INFO *info)
{
if (debug_level >= DEBUG_LEVEL_ISR)
printk("%s(%d):rx_start(%s)\n",
__FILE__, __LINE__, info->device_name);
rx_reset_buffers(info);
info->rx_enabled = false;
info->rx_overflow = false;
/* MODE:03 RAC Receiver Active, 1=active */
set_reg_bits(info, CHA + MODE, BIT3);
info->rx_enabled = true;
}
static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty)
{
if (debug_level >= DEBUG_LEVEL_ISR)
printk("%s(%d):tx_start(%s)\n",
__FILE__, __LINE__, info->device_name);
if (info->tx_count) {
/* If auto RTS enabled and RTS is inactive, then assert */
/* RTS and set a flag indicating that the driver should */
/* negate RTS when the transmission completes. */
info->drop_rts_on_tx_done = false;
if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
get_signals(info);
if (!(info->serial_signals & SerialSignal_RTS)) {
info->serial_signals |= SerialSignal_RTS;
set_signals(info);
info->drop_rts_on_tx_done = true;
}
}
if (info->params.mode == MGSL_MODE_ASYNC) {
if (!info->tx_active) {
info->tx_active = true;
tx_ready(info, tty);
}
} else {
info->tx_active = true;
tx_ready(info, tty);
mod_timer(&info->tx_timer, jiffies +
msecs_to_jiffies(5000));
}
}
if (!info->tx_enabled)
info->tx_enabled = true;
}
static void tx_stop(MGSLPC_INFO *info)
{
if (debug_level >= DEBUG_LEVEL_ISR)
printk("%s(%d):tx_stop(%s)\n",
__FILE__, __LINE__, info->device_name);
del_timer(&info->tx_timer);
info->tx_enabled = false;
info->tx_active = false;
}
/* Reset the adapter to a known state and prepare it for further use.
*/
static void reset_device(MGSLPC_INFO *info)
{
/* power up both channels (set BIT7) */
write_reg(info, CHA + CCR0, 0x80);
write_reg(info, CHB + CCR0, 0x80);
write_reg(info, CHA + MODE, 0);
write_reg(info, CHB + MODE, 0);
/* disable all interrupts */
irq_disable(info, CHA, 0xffff);
irq_disable(info, CHB, 0xffff);
port_irq_disable(info, 0xff);
/* PCR Port Configuration Register
*
* 07..04 DEC[3..0] Serial I/F select outputs
* 03 output, 1=AUTO CTS control enabled
* 02 RI Ring Indicator input 0=active
* 01 DSR input 0=active
* 00 DTR output 0=active
*
* 0000 0110
*/
write_reg(info, PCR, 0x06);
/* PVR Port Value Register
*
* 07..04 DEC[3..0] Serial I/F select (0000=disabled)
* 03 AUTO CTS output 1=enabled
* 02 RI Ring Indicator input
* 01 DSR input
* 00 DTR output (1=inactive)
*
* 0000 0001
*/
// write_reg(info, PVR, PVR_DTR);
/* IPC Interrupt Port Configuration
*
* 07 VIS 1=Masked interrupts visible
* 06..05 Reserved, 0
* 04..03 SLA Slave address, 00 ignored
* 02 CASM Cascading Mode, 1=daisy chain
* 01..00 IC[1..0] Interrupt Config, 01=push-pull output, active low
*
* 0000 0101
*/
write_reg(info, IPC, 0x05);
}
static void async_mode(MGSLPC_INFO *info)
{
unsigned char val;
/* disable all interrupts */
irq_disable(info, CHA, 0xffff);
irq_disable(info, CHB, 0xffff);
port_irq_disable(info, 0xff);
/* MODE
*
* 07 Reserved, 0
* 06 FRTS RTS State, 0=active
* 05 FCTS Flow Control on CTS
* 04 FLON Flow Control Enable
* 03 RAC Receiver Active, 0 = inactive
* 02 RTS 0=Auto RTS, 1=manual RTS
* 01 TRS Timer Resolution, 1=512
* 00 TLP Test Loop, 0 = no loop
*
* 0000 0110
*/
val = 0x06;
if (info->params.loopback)
val |= BIT0;
/* preserve RTS state */
if (!(info->serial_signals & SerialSignal_RTS))
val |= BIT6;
write_reg(info, CHA + MODE, val);
/* CCR0
*
* 07 PU Power Up, 1=active, 0=power down
* 06 MCE Master Clock Enable, 1=enabled
* 05 Reserved, 0
* 04..02 SC[2..0] Encoding, 000=NRZ
* 01..00 SM[1..0] Serial Mode, 11=Async
*
* 1000 0011
*/
write_reg(info, CHA + CCR0, 0x83);
/* CCR1
*
* 07..05 Reserved, 0
* 04 ODS Output Driver Select, 1=TxD is push-pull output
* 03 BCR Bit Clock Rate, 1=16x
* 02..00 CM[2..0] Clock Mode, 111=BRG
*
* 0001 1111
*/
write_reg(info, CHA + CCR1, 0x1f);
/* CCR2 (channel A)
*
* 07..06 BGR[9..8] Baud rate bits 9..8
* 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
* 04 SSEL Clock source select, 1=submode b
* 03 TOE 0=TxCLK is input, 0=TxCLK is input
* 02 RWX Read/Write Exchange 0=disabled
* 01 Reserved, 0
* 00 DIV, data inversion 0=disabled, 1=enabled
*
* 0001 0000
*/
write_reg(info, CHA + CCR2, 0x10);
/* CCR3
*
* 07..01 Reserved, 0
* 00 PSD DPLL Phase Shift Disable
*
* 0000 0000
*/
write_reg(info, CHA + CCR3, 0);
/* CCR4
*
* 07 MCK4 Master Clock Divide by 4, 1=enabled
* 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
* 05 TST1 Test Pin, 0=normal operation
* 04 ICD Ivert Carrier Detect, 1=enabled (active low)
* 03..00 Reserved, must be 0
*
* 0101 0000
*/
write_reg(info, CHA + CCR4, 0x50);
mgslpc_set_rate(info, CHA, info->params.data_rate * 16);
/* DAFO Data Format
*
* 07 Reserved, 0
* 06 XBRK transmit break, 0=normal operation
* 05 Stop bits (0=1, 1=2)
* 04..03 PAR[1..0] Parity (01=odd, 10=even)
* 02 PAREN Parity Enable
* 01..00 CHL[1..0] Character Length (00=8, 01=7)
*
*/
val = 0x00;
if (info->params.data_bits != 8)
val |= BIT0; /* 7 bits */
if (info->params.stop_bits != 1)
val |= BIT5;
if (info->params.parity != ASYNC_PARITY_NONE)
{
val |= BIT2; /* Parity enable */
if (info->params.parity == ASYNC_PARITY_ODD)
val |= BIT3;
else
val |= BIT4;
}
write_reg(info, CHA + DAFO, val);
/* RFC Rx FIFO Control
*
* 07 Reserved, 0
* 06 DPS, 1=parity bit not stored in data byte
* 05 DXS, 0=all data stored in FIFO (including XON/XOFF)
* 04 RFDF Rx FIFO Data Format, 1=status byte stored in FIFO
* 03..02 RFTH[1..0], rx threshold, 11=16 status + 16 data byte
* 01 Reserved, 0
* 00 TCDE Terminate Char Detect Enable, 0=disabled
*
* 0101 1100
*/
write_reg(info, CHA + RFC, 0x5c);
/* RLCR Receive length check register
*
* Max frame length = (RL + 1) * 32
*/
write_reg(info, CHA + RLCR, 0);
/* XBCH Transmit Byte Count High
*
* 07 DMA mode, 0 = interrupt driven
* 06 NRM, 0=ABM (ignored)
* 05 CAS Carrier Auto Start
* 04 XC Transmit Continuously (ignored)
* 03..00 XBC[10..8] Transmit byte count bits 10..8
*
* 0000 0000
*/
val = 0x00;
if (info->params.flags & HDLC_FLAG_AUTO_DCD)
val |= BIT5;
write_reg(info, CHA + XBCH, val);
if (info->params.flags & HDLC_FLAG_AUTO_CTS)
irq_enable(info, CHA, IRQ_CTS);
/* MODE:03 RAC Receiver Active, 1=active */
set_reg_bits(info, CHA + MODE, BIT3);
enable_auxclk(info);
if (info->params.flags & HDLC_FLAG_AUTO_CTS) {
irq_enable(info, CHB, IRQ_CTS);
/* PVR[3] 1=AUTO CTS active */
set_reg_bits(info, CHA + PVR, BIT3);
} else
clear_reg_bits(info, CHA + PVR, BIT3);
irq_enable(info, CHA,
IRQ_RXEOM | IRQ_RXFIFO | IRQ_BREAK_ON | IRQ_RXTIME |
IRQ_ALLSENT | IRQ_TXFIFO);
issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
wait_command_complete(info, CHA);
read_reg16(info, CHA + ISR); /* clear pending IRQs */
}
/* Set the HDLC idle mode for the transmitter.
*/
static void tx_set_idle(MGSLPC_INFO *info)
{
/* Note: ESCC2 only supports flags and one idle modes */
if (info->idle_mode == HDLC_TXIDLE_FLAGS)
set_reg_bits(info, CHA + CCR1, BIT3);
else
clear_reg_bits(info, CHA + CCR1, BIT3);
}
/* get state of the V24 status (input) signals.
*/
static void get_signals(MGSLPC_INFO *info)
{
unsigned char status = 0;
/* preserve RTS and DTR */
info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
if (read_reg(info, CHB + VSTR) & BIT7)
info->serial_signals |= SerialSignal_DCD;
if (read_reg(info, CHB + STAR) & BIT1)
info->serial_signals |= SerialSignal_CTS;
status = read_reg(info, CHA + PVR);
if (!(status & PVR_RI))
info->serial_signals |= SerialSignal_RI;
if (!(status & PVR_DSR))
info->serial_signals |= SerialSignal_DSR;
}
/* Set the state of RTS and DTR based on contents of
* serial_signals member of device extension.
*/
static void set_signals(MGSLPC_INFO *info)
{
unsigned char val;
val = read_reg(info, CHA + MODE);
if (info->params.mode == MGSL_MODE_ASYNC) {
if (info->serial_signals & SerialSignal_RTS)
val &= ~BIT6;
else
val |= BIT6;
} else {
if (info->serial_signals & SerialSignal_RTS)
val |= BIT2;
else
val &= ~BIT2;
}
write_reg(info, CHA + MODE, val);
if (info->serial_signals & SerialSignal_DTR)
clear_reg_bits(info, CHA + PVR, PVR_DTR);
else
set_reg_bits(info, CHA + PVR, PVR_DTR);
}
static void rx_reset_buffers(MGSLPC_INFO *info)
{
RXBUF *buf;
int i;
info->rx_put = 0;
info->rx_get = 0;
info->rx_frame_count = 0;
for (i=0 ; i < info->rx_buf_count ; i++) {
buf = (RXBUF*)(info->rx_buf + (i * info->rx_buf_size));
buf->status = buf->count = 0;
}
}
/* Attempt to return a received HDLC frame
* Only frames received without errors are returned.
*
* Returns true if frame returned, otherwise false
*/
static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty)
{
unsigned short status;
RXBUF *buf;
unsigned int framesize = 0;
unsigned long flags;
bool return_frame = false;
if (info->rx_frame_count == 0)
return false;
buf = (RXBUF*)(info->rx_buf + (info->rx_get * info->rx_buf_size));
status = buf->status;
/* 07 VFR 1=valid frame
* 06 RDO 1=data overrun
* 05 CRC 1=OK, 0=error
* 04 RAB 1=frame aborted
*/
if ((status & 0xf0) != 0xA0) {
if (!(status & BIT7) || (status & BIT4))
info->icount.rxabort++;
else if (status & BIT6)
info->icount.rxover++;
else if (!(status & BIT5)) {
info->icount.rxcrc++;
if (info->params.crc_type & HDLC_CRC_RETURN_EX)
return_frame = true;
}
framesize = 0;
#if SYNCLINK_GENERIC_HDLC
{
info->netdev->stats.rx_errors++;
info->netdev->stats.rx_frame_errors++;
}
#endif
} else
return_frame = true;
if (return_frame)
framesize = buf->count;
if (debug_level >= DEBUG_LEVEL_BH)
printk("%s(%d):rx_get_frame(%s) status=%04X size=%d\n",
__FILE__, __LINE__, info->device_name, status, framesize);
if (debug_level >= DEBUG_LEVEL_DATA)
trace_block(info, buf->data, framesize, 0);
if (framesize) {
if ((info->params.crc_type & HDLC_CRC_RETURN_EX &&
framesize+1 > info->max_frame_size) ||
framesize > info->max_frame_size)
info->icount.rxlong++;
else {
if (status & BIT5)
info->icount.rxok++;
if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
*(buf->data + framesize) = status & BIT5 ? RX_OK:RX_CRC_ERROR;
++framesize;
}
#if SYNCLINK_GENERIC_HDLC
if (info->netcount)
hdlcdev_rx(info, buf->data, framesize);
else
#endif
ldisc_receive_buf(tty, buf->data, info->flag_buf, framesize);
}
}
spin_lock_irqsave(&info->lock, flags);
buf->status = buf->count = 0;
info->rx_frame_count--;
info->rx_get++;
if (info->rx_get >= info->rx_buf_count)
info->rx_get = 0;
spin_unlock_irqrestore(&info->lock, flags);
return true;
}
static bool register_test(MGSLPC_INFO *info)
{
static unsigned char patterns[] =
{ 0x00, 0xff, 0xaa, 0x55, 0x69, 0x96, 0x0f };
static unsigned int count = ARRAY_SIZE(patterns);
unsigned int i;
bool rc = true;
unsigned long flags;
spin_lock_irqsave(&info->lock, flags);
reset_device(info);
for (i = 0; i < count; i++) {
write_reg(info, XAD1, patterns[i]);
write_reg(info, XAD2, patterns[(i + 1) % count]);
if ((read_reg(info, XAD1) != patterns[i]) ||
(read_reg(info, XAD2) != patterns[(i + 1) % count])) {
rc = false;
break;
}
}
spin_unlock_irqrestore(&info->lock, flags);
return rc;
}
static bool irq_test(MGSLPC_INFO *info)
{
unsigned long end_time;
unsigned long flags;
spin_lock_irqsave(&info->lock, flags);
reset_device(info);
info->testing_irq = true;
hdlc_mode(info);
info->irq_occurred = false;
/* init hdlc mode */
irq_enable(info, CHA, IRQ_TIMER);
write_reg(info, CHA + TIMR, 0); /* 512 cycles */
issue_command(info, CHA, CMD_START_TIMER);
spin_unlock_irqrestore(&info->lock, flags);
end_time=100;
while(end_time-- && !info->irq_occurred) {
msleep_interruptible(10);
}
info->testing_irq = false;
spin_lock_irqsave(&info->lock, flags);
reset_device(info);
spin_unlock_irqrestore(&info->lock, flags);
return info->irq_occurred;
}
static int adapter_test(MGSLPC_INFO *info)
{
if (!register_test(info)) {
info->init_error = DiagStatus_AddressFailure;
printk("%s(%d):Register test failure for device %s Addr=%04X\n",
__FILE__, __LINE__, info->device_name, (unsigned short)(info->io_base));
return -ENODEV;
}
if (!irq_test(info)) {
info->init_error = DiagStatus_IrqFailure;
printk("%s(%d):Interrupt test failure for device %s IRQ=%d\n",
__FILE__, __LINE__, info->device_name, (unsigned short)(info->irq_level));
return -ENODEV;
}
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):device %s passed diagnostics\n",
__FILE__, __LINE__, info->device_name);
return 0;
}
static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit)
{
int i;
int linecount;
if (xmit)
printk("%s tx data:\n", info->device_name);
else
printk("%s rx data:\n", info->device_name);
while(count) {
if (count > 16)
linecount = 16;
else
linecount = count;
for(i=0;i<linecount;i++)
printk("%02X ", (unsigned char)data[i]);
for(;i<17;i++)
printk(" ");
for(i=0;i<linecount;i++) {
if (data[i]>=040 && data[i]<=0176)
printk("%c", data[i]);
else
printk(".");
}
printk("\n");
data += linecount;
count -= linecount;
}
}
/* HDLC frame time out
* update stats and do tx completion processing
*/
static void tx_timeout(unsigned long context)
{
MGSLPC_INFO *info = (MGSLPC_INFO*)context;
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):tx_timeout(%s)\n",
__FILE__, __LINE__, info->device_name);
if (info->tx_active &&
info->params.mode == MGSL_MODE_HDLC) {
info->icount.txtimeout++;
}
spin_lock_irqsave(&info->lock, flags);
info->tx_active = false;
info->tx_count = info->tx_put = info->tx_get = 0;
spin_unlock_irqrestore(&info->lock, flags);
#if SYNCLINK_GENERIC_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
else
#endif
{
struct tty_struct *tty = tty_port_tty_get(&info->port);
bh_transmit(info, tty);
tty_kref_put(tty);
}
}
#if SYNCLINK_GENERIC_HDLC
/**
* called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
* set encoding and frame check sequence (FCS) options
*
* dev pointer to network device structure
* encoding serial encoding setting
* parity FCS setting
*
* returns 0 if success, otherwise error code
*/
static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
unsigned short parity)
{
MGSLPC_INFO *info = dev_to_port(dev);
struct tty_struct *tty;
unsigned char new_encoding;
unsigned short new_crctype;
/* return error if TTY interface open */
if (info->port.count)
return -EBUSY;
switch (encoding)
{
case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
default: return -EINVAL;
}
switch (parity)
{
case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
default: return -EINVAL;
}
info->params.encoding = new_encoding;
info->params.crc_type = new_crctype;
/* if network interface up, reprogram hardware */
if (info->netcount) {
tty = tty_port_tty_get(&info->port);
mgslpc_program_hw(info, tty);
tty_kref_put(tty);
}
return 0;
}
/**
* called by generic HDLC layer to send frame
*
* skb socket buffer containing HDLC frame
* dev pointer to network device structure
*/
static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
struct net_device *dev)
{
MGSLPC_INFO *info = dev_to_port(dev);
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk(KERN_INFO "%s:hdlc_xmit(%s)\n", __FILE__, dev->name);
/* stop sending until this frame completes */
netif_stop_queue(dev);
/* copy data to device buffers */
skb_copy_from_linear_data(skb, info->tx_buf, skb->len);
info->tx_get = 0;
info->tx_put = info->tx_count = skb->len;
/* update network statistics */
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
/* done with socket buffer, so free it */
dev_kfree_skb(skb);
/* save start time for transmit timeout detection */
dev->trans_start = jiffies;
/* start hardware transmitter if necessary */
spin_lock_irqsave(&info->lock, flags);
if (!info->tx_active) {
struct tty_struct *tty = tty_port_tty_get(&info->port);
tx_start(info, tty);
tty_kref_put(tty);
}
spin_unlock_irqrestore(&info->lock, flags);
return NETDEV_TX_OK;
}
/**
* called by network layer when interface enabled
* claim resources and initialize hardware
*
* dev pointer to network device structure
*
* returns 0 if success, otherwise error code
*/
static int hdlcdev_open(struct net_device *dev)
{
MGSLPC_INFO *info = dev_to_port(dev);
struct tty_struct *tty;
int rc;
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s:hdlcdev_open(%s)\n", __FILE__, dev->name);
/* generic HDLC layer open processing */
rc = hdlc_open(dev);
if (rc != 0)
return rc;
/* arbitrate between network and tty opens */
spin_lock_irqsave(&info->netlock, flags);
if (info->port.count != 0 || info->netcount != 0) {
printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
spin_unlock_irqrestore(&info->netlock, flags);
return -EBUSY;
}
info->netcount=1;
spin_unlock_irqrestore(&info->netlock, flags);
tty = tty_port_tty_get(&info->port);
/* claim resources and init adapter */
rc = startup(info, tty);
if (rc != 0) {
tty_kref_put(tty);
spin_lock_irqsave(&info->netlock, flags);
info->netcount=0;
spin_unlock_irqrestore(&info->netlock, flags);
return rc;
}
/* assert RTS and DTR, apply hardware settings */
info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
mgslpc_program_hw(info, tty);
tty_kref_put(tty);
/* enable network layer transmit */
dev->trans_start = jiffies;
netif_start_queue(dev);
/* inform generic HDLC layer of current DCD status */
spin_lock_irqsave(&info->lock, flags);
get_signals(info);
spin_unlock_irqrestore(&info->lock, flags);
if (info->serial_signals & SerialSignal_DCD)
netif_carrier_on(dev);
else
netif_carrier_off(dev);
return 0;
}
/**
* called by network layer when interface is disabled
* shutdown hardware and release resources
*
* dev pointer to network device structure
*
* returns 0 if success, otherwise error code
*/
static int hdlcdev_close(struct net_device *dev)
{
MGSLPC_INFO *info = dev_to_port(dev);
struct tty_struct *tty = tty_port_tty_get(&info->port);
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s:hdlcdev_close(%s)\n", __FILE__, dev->name);
netif_stop_queue(dev);
/* shutdown adapter and release resources */
shutdown(info, tty);
tty_kref_put(tty);
hdlc_close(dev);
spin_lock_irqsave(&info->netlock, flags);
info->netcount=0;
spin_unlock_irqrestore(&info->netlock, flags);
return 0;
}
/**
* called by network layer to process IOCTL call to network device
*
* dev pointer to network device structure
* ifr pointer to network interface request structure
* cmd IOCTL command code
*
* returns 0 if success, otherwise error code
*/
static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
const size_t size = sizeof(sync_serial_settings);
sync_serial_settings new_line;
sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
MGSLPC_INFO *info = dev_to_port(dev);
unsigned int flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s:hdlcdev_ioctl(%s)\n", __FILE__, dev->name);
/* return error if TTY interface open */
if (info->port.count)
return -EBUSY;
if (cmd != SIOCWANDEV)
return hdlc_ioctl(dev, ifr, cmd);
memset(&new_line, 0, size);
switch(ifr->ifr_settings.type) {
case IF_GET_IFACE: /* return current sync_serial_settings */
ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
if (ifr->ifr_settings.size < size) {
ifr->ifr_settings.size = size; /* data size wanted */
return -ENOBUFS;
}
flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
switch (flags){
case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
default: new_line.clock_type = CLOCK_DEFAULT;
}
new_line.clock_rate = info->params.clock_speed;
new_line.loopback = info->params.loopback ? 1:0;
if (copy_to_user(line, &new_line, size))
return -EFAULT;
return 0;
case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
if(!capable(CAP_NET_ADMIN))
return -EPERM;
if (copy_from_user(&new_line, line, size))
return -EFAULT;
switch (new_line.clock_type)
{
case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
case CLOCK_DEFAULT: flags = info->params.flags &
(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
default: return -EINVAL;
}
if (new_line.loopback != 0 && new_line.loopback != 1)
return -EINVAL;
info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
info->params.flags |= flags;
info->params.loopback = new_line.loopback;
if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
info->params.clock_speed = new_line.clock_rate;
else
info->params.clock_speed = 0;
/* if network interface up, reprogram hardware */
if (info->netcount) {
struct tty_struct *tty = tty_port_tty_get(&info->port);
mgslpc_program_hw(info, tty);
tty_kref_put(tty);
}
return 0;
default:
return hdlc_ioctl(dev, ifr, cmd);
}
}
/**
* called by network layer when transmit timeout is detected
*
* dev pointer to network device structure
*/
static void hdlcdev_tx_timeout(struct net_device *dev)
{
MGSLPC_INFO *info = dev_to_port(dev);
unsigned long flags;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("hdlcdev_tx_timeout(%s)\n", dev->name);
dev->stats.tx_errors++;
dev->stats.tx_aborted_errors++;
spin_lock_irqsave(&info->lock, flags);
tx_stop(info);
spin_unlock_irqrestore(&info->lock, flags);
netif_wake_queue(dev);
}
/**
* called by device driver when transmit completes
* reenable network layer transmit if stopped
*
* info pointer to device instance information
*/
static void hdlcdev_tx_done(MGSLPC_INFO *info)
{
if (netif_queue_stopped(info->netdev))
netif_wake_queue(info->netdev);
}
/**
* called by device driver when frame received
* pass frame to network layer
*
* info pointer to device instance information
* buf pointer to buffer contianing frame data
* size count of data bytes in buf
*/
static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size)
{
struct sk_buff *skb = dev_alloc_skb(size);
struct net_device *dev = info->netdev;
if (debug_level >= DEBUG_LEVEL_INFO)
printk("hdlcdev_rx(%s)\n", dev->name);
if (skb == NULL) {
printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name);
dev->stats.rx_dropped++;
return;
}
memcpy(skb_put(skb, size), buf, size);
skb->protocol = hdlc_type_trans(skb, dev);
dev->stats.rx_packets++;
dev->stats.rx_bytes += size;
netif_rx(skb);
}
static const struct net_device_ops hdlcdev_ops = {
.ndo_open = hdlcdev_open,
.ndo_stop = hdlcdev_close,
.ndo_change_mtu = hdlc_change_mtu,
.ndo_start_xmit = hdlc_start_xmit,
.ndo_do_ioctl = hdlcdev_ioctl,
.ndo_tx_timeout = hdlcdev_tx_timeout,
};
/**
* called by device driver when adding device instance
* do generic HDLC initialization
*
* info pointer to device instance information
*
* returns 0 if success, otherwise error code
*/
static int hdlcdev_init(MGSLPC_INFO *info)
{
int rc;
struct net_device *dev;
hdlc_device *hdlc;
/* allocate and initialize network and HDLC layer objects */
dev = alloc_hdlcdev(info);
if (dev == NULL) {
printk(KERN_ERR "%s:hdlc device allocation failure\n", __FILE__);
return -ENOMEM;
}
/* for network layer reporting purposes only */
dev->base_addr = info->io_base;
dev->irq = info->irq_level;
/* network layer callbacks and settings */
dev->netdev_ops = &hdlcdev_ops;
dev->watchdog_timeo = 10 * HZ;
dev->tx_queue_len = 50;
/* generic HDLC layer callbacks and settings */
hdlc = dev_to_hdlc(dev);
hdlc->attach = hdlcdev_attach;
hdlc->xmit = hdlcdev_xmit;
/* register objects with HDLC layer */
rc = register_hdlc_device(dev);
if (rc) {
printk(KERN_WARNING "%s:unable to register hdlc device\n", __FILE__);
free_netdev(dev);
return rc;
}
info->netdev = dev;
return 0;
}
/**
* called by device driver when removing device instance
* do generic HDLC cleanup
*
* info pointer to device instance information
*/
static void hdlcdev_exit(MGSLPC_INFO *info)
{
unregister_hdlc_device(info->netdev);
free_netdev(info->netdev);
info->netdev = NULL;
}
#endif /* CONFIG_HDLC */