| /* |
| * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org> |
| * Copyright (C) 2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu> |
| * Copyright (C) 2004 Aurelien Alleaume <slts@free.fr> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #if !defined(_ISL_OID_H) |
| #define _ISL_OID_H |
| |
| /* |
| * MIB related constant and structure definitions for communicating |
| * with the device firmware |
| */ |
| |
| struct obj_ssid { |
| u8 length; |
| char octets[33]; |
| } __packed; |
| |
| struct obj_key { |
| u8 type; /* dot11_priv_t */ |
| u8 length; |
| char key[32]; |
| } __packed; |
| |
| struct obj_mlme { |
| u8 address[6]; |
| u16 id; |
| u16 state; |
| u16 code; |
| } __packed; |
| |
| struct obj_mlmeex { |
| u8 address[6]; |
| u16 id; |
| u16 state; |
| u16 code; |
| u16 size; |
| u8 data[0]; |
| } __packed; |
| |
| struct obj_buffer { |
| u32 size; |
| u32 addr; /* 32bit bus address */ |
| } __packed; |
| |
| struct obj_bss { |
| u8 address[6]; |
| int:16; /* padding */ |
| |
| char state; |
| char reserved; |
| short age; |
| |
| char quality; |
| char rssi; |
| |
| struct obj_ssid ssid; |
| short channel; |
| char beacon_period; |
| char dtim_period; |
| short capinfo; |
| short rates; |
| short basic_rates; |
| int:16; /* padding */ |
| } __packed; |
| |
| struct obj_bsslist { |
| u32 nr; |
| struct obj_bss bsslist[0]; |
| } __packed; |
| |
| struct obj_frequencies { |
| u16 nr; |
| u16 mhz[0]; |
| } __packed; |
| |
| struct obj_attachment { |
| char type; |
| char reserved; |
| short id; |
| short size; |
| char data[0]; |
| } __packed; |
| |
| /* |
| * in case everything's ok, the inlined function below will be |
| * optimized away by the compiler... |
| */ |
| static inline void |
| __bug_on_wrong_struct_sizes(void) |
| { |
| BUILD_BUG_ON(sizeof (struct obj_ssid) != 34); |
| BUILD_BUG_ON(sizeof (struct obj_key) != 34); |
| BUILD_BUG_ON(sizeof (struct obj_mlme) != 12); |
| BUILD_BUG_ON(sizeof (struct obj_mlmeex) != 14); |
| BUILD_BUG_ON(sizeof (struct obj_buffer) != 8); |
| BUILD_BUG_ON(sizeof (struct obj_bss) != 60); |
| BUILD_BUG_ON(sizeof (struct obj_bsslist) != 4); |
| BUILD_BUG_ON(sizeof (struct obj_frequencies) != 2); |
| } |
| |
| enum dot11_state_t { |
| DOT11_STATE_NONE = 0, |
| DOT11_STATE_AUTHING = 1, |
| DOT11_STATE_AUTH = 2, |
| DOT11_STATE_ASSOCING = 3, |
| |
| DOT11_STATE_ASSOC = 5, |
| DOT11_STATE_IBSS = 6, |
| DOT11_STATE_WDS = 7 |
| }; |
| |
| enum dot11_bsstype_t { |
| DOT11_BSSTYPE_NONE = 0, |
| DOT11_BSSTYPE_INFRA = 1, |
| DOT11_BSSTYPE_IBSS = 2, |
| DOT11_BSSTYPE_ANY = 3 |
| }; |
| |
| enum dot11_auth_t { |
| DOT11_AUTH_NONE = 0, |
| DOT11_AUTH_OS = 1, |
| DOT11_AUTH_SK = 2, |
| DOT11_AUTH_BOTH = 3 |
| }; |
| |
| enum dot11_mlme_t { |
| DOT11_MLME_AUTO = 0, |
| DOT11_MLME_INTERMEDIATE = 1, |
| DOT11_MLME_EXTENDED = 2 |
| }; |
| |
| enum dot11_priv_t { |
| DOT11_PRIV_WEP = 0, |
| DOT11_PRIV_TKIP = 1 |
| }; |
| |
| /* Prism "Nitro" / Frameburst / "Packet Frame Grouping" |
| * Value is in microseconds. Represents the # microseconds |
| * the firmware will take to group frames before sending out then out |
| * together with a CSMA contention. Without this all frames are |
| * sent with a CSMA contention. |
| * Bibliography: |
| * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Papers/Packet.Frame.Grouping.html |
| */ |
| enum dot11_maxframeburst_t { |
| /* Values for DOT11_OID_MAXFRAMEBURST */ |
| DOT11_MAXFRAMEBURST_OFF = 0, /* Card firmware default */ |
| DOT11_MAXFRAMEBURST_MIXED_SAFE = 650, /* 802.11 a,b,g safe */ |
| DOT11_MAXFRAMEBURST_IDEAL = 1300, /* Theoretical ideal level */ |
| DOT11_MAXFRAMEBURST_MAX = 5000, /* Use this as max, |
| * Note: firmware allows for greater values. This is a |
| * recommended max. I'll update this as I find |
| * out what the real MAX is. Also note that you don't necessarily |
| * get better results with a greater value here. |
| */ |
| }; |
| |
| /* Support for 802.11 long and short frame preambles. |
| * Long preamble uses 128-bit sync field, 8-bit CRC |
| * Short preamble uses 56-bit sync field, 16-bit CRC |
| * |
| * 802.11a -- not sure, both optionally ? |
| * 802.11b supports long and optionally short |
| * 802.11g supports both */ |
| enum dot11_preamblesettings_t { |
| DOT11_PREAMBLESETTING_LONG = 0, |
| /* Allows *only* long 802.11 preambles */ |
| DOT11_PREAMBLESETTING_SHORT = 1, |
| /* Allows *only* short 802.11 preambles */ |
| DOT11_PREAMBLESETTING_DYNAMIC = 2 |
| /* AutomatiGically set */ |
| }; |
| |
| /* Support for 802.11 slot timing (time between packets). |
| * |
| * Long uses 802.11a slot timing (9 usec ?) |
| * Short uses 802.11b slot timing (20 use ?) */ |
| enum dot11_slotsettings_t { |
| DOT11_SLOTSETTINGS_LONG = 0, |
| /* Allows *only* long 802.11b slot timing */ |
| DOT11_SLOTSETTINGS_SHORT = 1, |
| /* Allows *only* long 802.11a slot timing */ |
| DOT11_SLOTSETTINGS_DYNAMIC = 2 |
| /* AutomatiGically set */ |
| }; |
| |
| /* All you need to know, ERP is "Extended Rate PHY". |
| * An Extended Rate PHY (ERP) STA or AP shall support three different |
| * preamble and header formats: |
| * Long preamble (refer to above) |
| * Short preamble (refer to above) |
| * OFDM preamble ( ? ) |
| * |
| * I'm assuming here Protection tells the AP |
| * to be careful, a STA which cannot handle the long pre-amble |
| * has joined. |
| */ |
| enum do11_nonerpstatus_t { |
| DOT11_ERPSTAT_NONEPRESENT = 0, |
| DOT11_ERPSTAT_USEPROTECTION = 1 |
| }; |
| |
| /* (ERP is "Extended Rate PHY") Way to read NONERP is NON-ERP-* |
| * The key here is DOT11 NON ERP NEVER protects against |
| * NON ERP STA's. You *don't* want this unless |
| * you know what you are doing. It means you will only |
| * get Extended Rate capabilities */ |
| enum dot11_nonerpprotection_t { |
| DOT11_NONERP_NEVER = 0, |
| DOT11_NONERP_ALWAYS = 1, |
| DOT11_NONERP_DYNAMIC = 2 |
| }; |
| |
| /* Preset OID configuration for 802.11 modes |
| * Note: DOT11_OID_CW[MIN|MAX] hold the values of the |
| * DCS MIN|MAX backoff used */ |
| enum dot11_profile_t { /* And set/allowed values */ |
| /* Allowed values for DOT11_OID_PROFILES */ |
| DOT11_PROFILE_B_ONLY = 0, |
| /* DOT11_OID_RATES: 1, 2, 5.5, 11Mbps |
| * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC |
| * DOT11_OID_CWMIN: 31 |
| * DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC |
| * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_LONG |
| */ |
| DOT11_PROFILE_MIXED_G_WIFI = 1, |
| /* DOT11_OID_RATES: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54Mbs |
| * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC |
| * DOT11_OID_CWMIN: 15 |
| * DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC |
| * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_DYNAMIC |
| */ |
| DOT11_PROFILE_MIXED_LONG = 2, /* "Long range" */ |
| /* Same as Profile MIXED_G_WIFI */ |
| DOT11_PROFILE_G_ONLY = 3, |
| /* Same as Profile MIXED_G_WIFI */ |
| DOT11_PROFILE_TEST = 4, |
| /* Same as Profile MIXED_G_WIFI except: |
| * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_SHORT |
| * DOT11_OID_NONEPROTECTION: DOT11_NOERP_NEVER |
| * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_SHORT |
| */ |
| DOT11_PROFILE_B_WIFI = 5, |
| /* Same as Profile B_ONLY */ |
| DOT11_PROFILE_A_ONLY = 6, |
| /* Same as Profile MIXED_G_WIFI except: |
| * DOT11_OID_RATES: 6, 9, 12, 18, 24, 36, 48, 54Mbs |
| */ |
| DOT11_PROFILE_MIXED_SHORT = 7 |
| /* Same as MIXED_G_WIFI */ |
| }; |
| |
| |
| /* The dot11d conformance level configures the 802.11d conformance levels. |
| * The following conformance levels exist:*/ |
| enum oid_inl_conformance_t { |
| OID_INL_CONFORMANCE_NONE = 0, /* Perform active scanning */ |
| OID_INL_CONFORMANCE_STRICT = 1, /* Strictly adhere to 802.11d */ |
| OID_INL_CONFORMANCE_FLEXIBLE = 2, /* Use passed 802.11d info to |
| * determine channel AND/OR just make assumption that active |
| * channels are valid channels */ |
| }; |
| |
| enum oid_inl_mode_t { |
| INL_MODE_NONE = -1, |
| INL_MODE_PROMISCUOUS = 0, |
| INL_MODE_CLIENT = 1, |
| INL_MODE_AP = 2, |
| INL_MODE_SNIFFER = 3 |
| }; |
| |
| enum oid_inl_config_t { |
| INL_CONFIG_NOTHING = 0x00, |
| INL_CONFIG_MANUALRUN = 0x01, |
| INL_CONFIG_FRAMETRAP = 0x02, |
| INL_CONFIG_RXANNEX = 0x04, |
| INL_CONFIG_TXANNEX = 0x08, |
| INL_CONFIG_WDS = 0x10 |
| }; |
| |
| enum oid_inl_phycap_t { |
| INL_PHYCAP_2400MHZ = 1, |
| INL_PHYCAP_5000MHZ = 2, |
| INL_PHYCAP_FAA = 0x80000000, /* Means card supports the FAA switch */ |
| }; |
| |
| |
| enum oid_num_t { |
| GEN_OID_MACADDRESS = 0, |
| GEN_OID_LINKSTATE, |
| GEN_OID_WATCHDOG, |
| GEN_OID_MIBOP, |
| GEN_OID_OPTIONS, |
| GEN_OID_LEDCONFIG, |
| |
| /* 802.11 */ |
| DOT11_OID_BSSTYPE, |
| DOT11_OID_BSSID, |
| DOT11_OID_SSID, |
| DOT11_OID_STATE, |
| DOT11_OID_AID, |
| DOT11_OID_COUNTRYSTRING, |
| DOT11_OID_SSIDOVERRIDE, |
| |
| DOT11_OID_MEDIUMLIMIT, |
| DOT11_OID_BEACONPERIOD, |
| DOT11_OID_DTIMPERIOD, |
| DOT11_OID_ATIMWINDOW, |
| DOT11_OID_LISTENINTERVAL, |
| DOT11_OID_CFPPERIOD, |
| DOT11_OID_CFPDURATION, |
| |
| DOT11_OID_AUTHENABLE, |
| DOT11_OID_PRIVACYINVOKED, |
| DOT11_OID_EXUNENCRYPTED, |
| DOT11_OID_DEFKEYID, |
| DOT11_OID_DEFKEYX, /* DOT11_OID_DEFKEY1,...DOT11_OID_DEFKEY4 */ |
| DOT11_OID_STAKEY, |
| DOT11_OID_REKEYTHRESHOLD, |
| DOT11_OID_STASC, |
| |
| DOT11_OID_PRIVTXREJECTED, |
| DOT11_OID_PRIVRXPLAIN, |
| DOT11_OID_PRIVRXFAILED, |
| DOT11_OID_PRIVRXNOKEY, |
| |
| DOT11_OID_RTSTHRESH, |
| DOT11_OID_FRAGTHRESH, |
| DOT11_OID_SHORTRETRIES, |
| DOT11_OID_LONGRETRIES, |
| DOT11_OID_MAXTXLIFETIME, |
| DOT11_OID_MAXRXLIFETIME, |
| DOT11_OID_AUTHRESPTIMEOUT, |
| DOT11_OID_ASSOCRESPTIMEOUT, |
| |
| DOT11_OID_ALOFT_TABLE, |
| DOT11_OID_ALOFT_CTRL_TABLE, |
| DOT11_OID_ALOFT_RETREAT, |
| DOT11_OID_ALOFT_PROGRESS, |
| DOT11_OID_ALOFT_FIXEDRATE, |
| DOT11_OID_ALOFT_RSSIGRAPH, |
| DOT11_OID_ALOFT_CONFIG, |
| |
| DOT11_OID_VDCFX, |
| DOT11_OID_MAXFRAMEBURST, |
| |
| DOT11_OID_PSM, |
| DOT11_OID_CAMTIMEOUT, |
| DOT11_OID_RECEIVEDTIMS, |
| DOT11_OID_ROAMPREFERENCE, |
| |
| DOT11_OID_BRIDGELOCAL, |
| DOT11_OID_CLIENTS, |
| DOT11_OID_CLIENTSASSOCIATED, |
| DOT11_OID_CLIENTX, /* DOT11_OID_CLIENTX,...DOT11_OID_CLIENT2007 */ |
| |
| DOT11_OID_CLIENTFIND, |
| DOT11_OID_WDSLINKADD, |
| DOT11_OID_WDSLINKREMOVE, |
| DOT11_OID_EAPAUTHSTA, |
| DOT11_OID_EAPUNAUTHSTA, |
| DOT11_OID_DOT1XENABLE, |
| DOT11_OID_MICFAILURE, |
| DOT11_OID_REKEYINDICATE, |
| |
| DOT11_OID_MPDUTXSUCCESSFUL, |
| DOT11_OID_MPDUTXONERETRY, |
| DOT11_OID_MPDUTXMULTIPLERETRIES, |
| DOT11_OID_MPDUTXFAILED, |
| DOT11_OID_MPDURXSUCCESSFUL, |
| DOT11_OID_MPDURXDUPS, |
| DOT11_OID_RTSSUCCESSFUL, |
| DOT11_OID_RTSFAILED, |
| DOT11_OID_ACKFAILED, |
| DOT11_OID_FRAMERECEIVES, |
| DOT11_OID_FRAMEERRORS, |
| DOT11_OID_FRAMEABORTS, |
| DOT11_OID_FRAMEABORTSPHY, |
| |
| DOT11_OID_SLOTTIME, |
| DOT11_OID_CWMIN, /* MIN DCS backoff */ |
| DOT11_OID_CWMAX, /* MAX DCS backoff */ |
| DOT11_OID_ACKWINDOW, |
| DOT11_OID_ANTENNARX, |
| DOT11_OID_ANTENNATX, |
| DOT11_OID_ANTENNADIVERSITY, |
| DOT11_OID_CHANNEL, |
| DOT11_OID_EDTHRESHOLD, |
| DOT11_OID_PREAMBLESETTINGS, |
| DOT11_OID_RATES, |
| DOT11_OID_CCAMODESUPPORTED, |
| DOT11_OID_CCAMODE, |
| DOT11_OID_RSSIVECTOR, |
| DOT11_OID_OUTPUTPOWERTABLE, |
| DOT11_OID_OUTPUTPOWER, |
| DOT11_OID_SUPPORTEDRATES, |
| DOT11_OID_FREQUENCY, |
| DOT11_OID_SUPPORTEDFREQUENCIES, |
| DOT11_OID_NOISEFLOOR, |
| DOT11_OID_FREQUENCYACTIVITY, |
| DOT11_OID_IQCALIBRATIONTABLE, |
| DOT11_OID_NONERPPROTECTION, |
| DOT11_OID_SLOTSETTINGS, |
| DOT11_OID_NONERPTIMEOUT, |
| DOT11_OID_PROFILES, |
| DOT11_OID_EXTENDEDRATES, |
| |
| DOT11_OID_DEAUTHENTICATE, |
| DOT11_OID_AUTHENTICATE, |
| DOT11_OID_DISASSOCIATE, |
| DOT11_OID_ASSOCIATE, |
| DOT11_OID_SCAN, |
| DOT11_OID_BEACON, |
| DOT11_OID_PROBE, |
| DOT11_OID_DEAUTHENTICATEEX, |
| DOT11_OID_AUTHENTICATEEX, |
| DOT11_OID_DISASSOCIATEEX, |
| DOT11_OID_ASSOCIATEEX, |
| DOT11_OID_REASSOCIATE, |
| DOT11_OID_REASSOCIATEEX, |
| |
| DOT11_OID_NONERPSTATUS, |
| |
| DOT11_OID_STATIMEOUT, |
| DOT11_OID_MLMEAUTOLEVEL, |
| DOT11_OID_BSSTIMEOUT, |
| DOT11_OID_ATTACHMENT, |
| DOT11_OID_PSMBUFFER, |
| |
| DOT11_OID_BSSS, |
| DOT11_OID_BSSX, /*DOT11_OID_BSS1,...,DOT11_OID_BSS64 */ |
| DOT11_OID_BSSFIND, |
| DOT11_OID_BSSLIST, |
| |
| OID_INL_TUNNEL, |
| OID_INL_MEMADDR, |
| OID_INL_MEMORY, |
| OID_INL_MODE, |
| OID_INL_COMPONENT_NR, |
| OID_INL_VERSION, |
| OID_INL_INTERFACE_ID, |
| OID_INL_COMPONENT_ID, |
| OID_INL_CONFIG, |
| OID_INL_DOT11D_CONFORMANCE, |
| OID_INL_PHYCAPABILITIES, |
| OID_INL_OUTPUTPOWER, |
| |
| OID_NUM_LAST |
| }; |
| |
| #define OID_FLAG_CACHED 0x80 |
| #define OID_FLAG_TYPE 0x7f |
| |
| #define OID_TYPE_U32 0x01 |
| #define OID_TYPE_SSID 0x02 |
| #define OID_TYPE_KEY 0x03 |
| #define OID_TYPE_BUFFER 0x04 |
| #define OID_TYPE_BSS 0x05 |
| #define OID_TYPE_BSSLIST 0x06 |
| #define OID_TYPE_FREQUENCIES 0x07 |
| #define OID_TYPE_MLME 0x08 |
| #define OID_TYPE_MLMEEX 0x09 |
| #define OID_TYPE_ADDR 0x0A |
| #define OID_TYPE_RAW 0x0B |
| #define OID_TYPE_ATTACH 0x0C |
| |
| /* OID_TYPE_MLMEEX is special because of a variable size field when sending. |
| * Not yet implemented (not used in driver anyway). |
| */ |
| |
| struct oid_t { |
| enum oid_num_t oid; |
| short range; /* to define a range of oid */ |
| short size; /* max size of the associated data */ |
| char flags; |
| }; |
| |
| union oid_res_t { |
| void *ptr; |
| u32 u; |
| }; |
| |
| #define IWMAX_BITRATES 20 |
| #define IWMAX_BSS 24 |
| #define IWMAX_FREQ 30 |
| #define PRIV_STR_SIZE 1024 |
| |
| #endif /* !defined(_ISL_OID_H) */ |
| /* EOF */ |
