| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * System Control and Power Interface (SCMI) based CPUFreq Interface driver |
| * |
| * Copyright (C) 2018 ARM Ltd. |
| * Sudeep Holla <sudeep.holla@arm.com> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/cpu.h> |
| #include <linux/cpufreq.h> |
| #include <linux/cpumask.h> |
| #include <linux/cpu_cooling.h> |
| #include <linux/export.h> |
| #include <linux/module.h> |
| #include <linux/pm_opp.h> |
| #include <linux/slab.h> |
| #include <linux/scmi_protocol.h> |
| #include <linux/types.h> |
| |
| struct scmi_data { |
| int domain_id; |
| struct device *cpu_dev; |
| struct thermal_cooling_device *cdev; |
| }; |
| |
| static const struct scmi_handle *handle; |
| |
| static unsigned int scmi_cpufreq_get_rate(unsigned int cpu) |
| { |
| struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu); |
| struct scmi_perf_ops *perf_ops = handle->perf_ops; |
| struct scmi_data *priv = policy->driver_data; |
| unsigned long rate; |
| int ret; |
| |
| ret = perf_ops->freq_get(handle, priv->domain_id, &rate, false); |
| if (ret) |
| return 0; |
| return rate / 1000; |
| } |
| |
| /* |
| * perf_ops->freq_set is not a synchronous, the actual OPP change will |
| * happen asynchronously and can get notified if the events are |
| * subscribed for by the SCMI firmware |
| */ |
| static int |
| scmi_cpufreq_set_target(struct cpufreq_policy *policy, unsigned int index) |
| { |
| int ret; |
| struct scmi_data *priv = policy->driver_data; |
| struct scmi_perf_ops *perf_ops = handle->perf_ops; |
| u64 freq = policy->freq_table[index].frequency; |
| |
| ret = perf_ops->freq_set(handle, priv->domain_id, freq * 1000, false); |
| if (!ret) |
| arch_set_freq_scale(policy->related_cpus, freq, |
| policy->cpuinfo.max_freq); |
| return ret; |
| } |
| |
| static unsigned int scmi_cpufreq_fast_switch(struct cpufreq_policy *policy, |
| unsigned int target_freq) |
| { |
| struct scmi_data *priv = policy->driver_data; |
| struct scmi_perf_ops *perf_ops = handle->perf_ops; |
| |
| if (!perf_ops->freq_set(handle, priv->domain_id, |
| target_freq * 1000, true)) { |
| arch_set_freq_scale(policy->related_cpus, target_freq, |
| policy->cpuinfo.max_freq); |
| return target_freq; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| scmi_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask) |
| { |
| int cpu, domain, tdomain; |
| struct device *tcpu_dev; |
| |
| domain = handle->perf_ops->device_domain_id(cpu_dev); |
| if (domain < 0) |
| return domain; |
| |
| for_each_possible_cpu(cpu) { |
| if (cpu == cpu_dev->id) |
| continue; |
| |
| tcpu_dev = get_cpu_device(cpu); |
| if (!tcpu_dev) |
| continue; |
| |
| tdomain = handle->perf_ops->device_domain_id(tcpu_dev); |
| if (tdomain == domain) |
| cpumask_set_cpu(cpu, cpumask); |
| } |
| |
| return 0; |
| } |
| |
| static int scmi_cpufreq_init(struct cpufreq_policy *policy) |
| { |
| int ret; |
| unsigned int latency; |
| struct device *cpu_dev; |
| struct scmi_data *priv; |
| struct cpufreq_frequency_table *freq_table; |
| |
| cpu_dev = get_cpu_device(policy->cpu); |
| if (!cpu_dev) { |
| pr_err("failed to get cpu%d device\n", policy->cpu); |
| return -ENODEV; |
| } |
| |
| ret = handle->perf_ops->device_opps_add(handle, cpu_dev); |
| if (ret) { |
| dev_warn(cpu_dev, "failed to add opps to the device\n"); |
| return ret; |
| } |
| |
| ret = scmi_get_sharing_cpus(cpu_dev, policy->cpus); |
| if (ret) { |
| dev_warn(cpu_dev, "failed to get sharing cpumask\n"); |
| return ret; |
| } |
| |
| ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); |
| if (ret) { |
| dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| ret = dev_pm_opp_get_opp_count(cpu_dev); |
| if (ret <= 0) { |
| dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n"); |
| ret = -EPROBE_DEFER; |
| goto out_free_opp; |
| } |
| |
| priv = kzalloc(sizeof(*priv), GFP_KERNEL); |
| if (!priv) { |
| ret = -ENOMEM; |
| goto out_free_opp; |
| } |
| |
| ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); |
| if (ret) { |
| dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); |
| goto out_free_priv; |
| } |
| |
| priv->cpu_dev = cpu_dev; |
| priv->domain_id = handle->perf_ops->device_domain_id(cpu_dev); |
| |
| policy->driver_data = priv; |
| policy->freq_table = freq_table; |
| |
| /* SCMI allows DVFS request for any domain from any CPU */ |
| policy->dvfs_possible_from_any_cpu = true; |
| |
| latency = handle->perf_ops->transition_latency_get(handle, cpu_dev); |
| if (!latency) |
| latency = CPUFREQ_ETERNAL; |
| |
| policy->cpuinfo.transition_latency = latency; |
| |
| policy->fast_switch_possible = true; |
| return 0; |
| |
| out_free_priv: |
| kfree(priv); |
| out_free_opp: |
| dev_pm_opp_remove_all_dynamic(cpu_dev); |
| |
| return ret; |
| } |
| |
| static int scmi_cpufreq_exit(struct cpufreq_policy *policy) |
| { |
| struct scmi_data *priv = policy->driver_data; |
| |
| cpufreq_cooling_unregister(priv->cdev); |
| dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); |
| dev_pm_opp_remove_all_dynamic(priv->cpu_dev); |
| kfree(priv); |
| |
| return 0; |
| } |
| |
| static void scmi_cpufreq_ready(struct cpufreq_policy *policy) |
| { |
| struct scmi_data *priv = policy->driver_data; |
| |
| priv->cdev = of_cpufreq_cooling_register(policy); |
| } |
| |
| static struct cpufreq_driver scmi_cpufreq_driver = { |
| .name = "scmi", |
| .flags = CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY | |
| CPUFREQ_NEED_INITIAL_FREQ_CHECK, |
| .verify = cpufreq_generic_frequency_table_verify, |
| .attr = cpufreq_generic_attr, |
| .target_index = scmi_cpufreq_set_target, |
| .fast_switch = scmi_cpufreq_fast_switch, |
| .get = scmi_cpufreq_get_rate, |
| .init = scmi_cpufreq_init, |
| .exit = scmi_cpufreq_exit, |
| .ready = scmi_cpufreq_ready, |
| }; |
| |
| static int scmi_cpufreq_probe(struct scmi_device *sdev) |
| { |
| int ret; |
| |
| handle = sdev->handle; |
| |
| if (!handle || !handle->perf_ops) |
| return -ENODEV; |
| |
| ret = cpufreq_register_driver(&scmi_cpufreq_driver); |
| if (ret) { |
| dev_err(&sdev->dev, "%s: registering cpufreq failed, err: %d\n", |
| __func__, ret); |
| } |
| |
| return ret; |
| } |
| |
| static void scmi_cpufreq_remove(struct scmi_device *sdev) |
| { |
| cpufreq_unregister_driver(&scmi_cpufreq_driver); |
| } |
| |
| static const struct scmi_device_id scmi_id_table[] = { |
| { SCMI_PROTOCOL_PERF }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(scmi, scmi_id_table); |
| |
| static struct scmi_driver scmi_cpufreq_drv = { |
| .name = "scmi-cpufreq", |
| .probe = scmi_cpufreq_probe, |
| .remove = scmi_cpufreq_remove, |
| .id_table = scmi_id_table, |
| }; |
| module_scmi_driver(scmi_cpufreq_drv); |
| |
| MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); |
| MODULE_DESCRIPTION("ARM SCMI CPUFreq interface driver"); |
| MODULE_LICENSE("GPL v2"); |