| /* |
| * (c) Copyright 2002-2010, Ralink Technology, Inc. |
| * Copyright (C) 2014 Felix Fietkau <nbd@openwrt.org> |
| * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl> |
| * Copyright (C) 2018 Stanislaw Gruszka <stf_xl@wp.pl> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 |
| * as published by the Free Software Foundation |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/etherdevice.h> |
| |
| #include "mt76x0.h" |
| #include "mcu.h" |
| #include "eeprom.h" |
| #include "phy.h" |
| #include "initvals.h" |
| #include "initvals_phy.h" |
| #include "../mt76x02_phy.h" |
| |
| static int |
| mt76x0_rf_csr_wr(struct mt76x02_dev *dev, u32 offset, u8 value) |
| { |
| int ret = 0; |
| u8 bank, reg; |
| |
| if (test_bit(MT76_REMOVED, &dev->mt76.state)) |
| return -ENODEV; |
| |
| bank = MT_RF_BANK(offset); |
| reg = MT_RF_REG(offset); |
| |
| if (WARN_ON_ONCE(reg > 127) || WARN_ON_ONCE(bank > 8)) |
| return -EINVAL; |
| |
| mutex_lock(&dev->phy_mutex); |
| |
| if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) { |
| ret = -ETIMEDOUT; |
| goto out; |
| } |
| |
| mt76_wr(dev, MT_RF_CSR_CFG, |
| FIELD_PREP(MT_RF_CSR_CFG_DATA, value) | |
| FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) | |
| FIELD_PREP(MT_RF_CSR_CFG_REG_ID, reg) | |
| MT_RF_CSR_CFG_WR | |
| MT_RF_CSR_CFG_KICK); |
| |
| out: |
| mutex_unlock(&dev->phy_mutex); |
| |
| if (ret < 0) |
| dev_err(dev->mt76.dev, "Error: RF write %d:%d failed:%d!!\n", |
| bank, reg, ret); |
| |
| return ret; |
| } |
| |
| static int mt76x0_rf_csr_rr(struct mt76x02_dev *dev, u32 offset) |
| { |
| int ret = -ETIMEDOUT; |
| u32 val; |
| u8 bank, reg; |
| |
| if (test_bit(MT76_REMOVED, &dev->mt76.state)) |
| return -ENODEV; |
| |
| bank = MT_RF_BANK(offset); |
| reg = MT_RF_REG(offset); |
| |
| if (WARN_ON_ONCE(reg > 127) || WARN_ON_ONCE(bank > 8)) |
| return -EINVAL; |
| |
| mutex_lock(&dev->phy_mutex); |
| |
| if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) |
| goto out; |
| |
| mt76_wr(dev, MT_RF_CSR_CFG, |
| FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) | |
| FIELD_PREP(MT_RF_CSR_CFG_REG_ID, reg) | |
| MT_RF_CSR_CFG_KICK); |
| |
| if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) |
| goto out; |
| |
| val = mt76_rr(dev, MT_RF_CSR_CFG); |
| if (FIELD_GET(MT_RF_CSR_CFG_REG_ID, val) == reg && |
| FIELD_GET(MT_RF_CSR_CFG_REG_BANK, val) == bank) |
| ret = FIELD_GET(MT_RF_CSR_CFG_DATA, val); |
| |
| out: |
| mutex_unlock(&dev->phy_mutex); |
| |
| if (ret < 0) |
| dev_err(dev->mt76.dev, "Error: RF read %d:%d failed:%d!!\n", |
| bank, reg, ret); |
| |
| return ret; |
| } |
| |
| static int |
| mt76x0_rf_wr(struct mt76x02_dev *dev, u32 offset, u8 val) |
| { |
| if (mt76_is_usb(dev)) { |
| struct mt76_reg_pair pair = { |
| .reg = offset, |
| .value = val, |
| }; |
| |
| WARN_ON_ONCE(!test_bit(MT76_STATE_MCU_RUNNING, |
| &dev->mt76.state)); |
| return mt76_wr_rp(dev, MT_MCU_MEMMAP_RF, &pair, 1); |
| } else { |
| return mt76x0_rf_csr_wr(dev, offset, val); |
| } |
| } |
| |
| static int mt76x0_rf_rr(struct mt76x02_dev *dev, u32 offset) |
| { |
| int ret; |
| u32 val; |
| |
| if (mt76_is_usb(dev)) { |
| struct mt76_reg_pair pair = { |
| .reg = offset, |
| }; |
| |
| WARN_ON_ONCE(!test_bit(MT76_STATE_MCU_RUNNING, |
| &dev->mt76.state)); |
| ret = mt76_rd_rp(dev, MT_MCU_MEMMAP_RF, &pair, 1); |
| val = pair.value; |
| } else { |
| ret = val = mt76x0_rf_csr_rr(dev, offset); |
| } |
| |
| return (ret < 0) ? ret : val; |
| } |
| |
| static int |
| mt76x0_rf_rmw(struct mt76x02_dev *dev, u32 offset, u8 mask, u8 val) |
| { |
| int ret; |
| |
| ret = mt76x0_rf_rr(dev, offset); |
| if (ret < 0) |
| return ret; |
| |
| val |= ret & ~mask; |
| |
| ret = mt76x0_rf_wr(dev, offset, val); |
| return ret ? ret : val; |
| } |
| |
| static int |
| mt76x0_rf_set(struct mt76x02_dev *dev, u32 offset, u8 val) |
| { |
| return mt76x0_rf_rmw(dev, offset, 0, val); |
| } |
| |
| static int |
| mt76x0_rf_clear(struct mt76x02_dev *dev, u32 offset, u8 mask) |
| { |
| return mt76x0_rf_rmw(dev, offset, mask, 0); |
| } |
| |
| static void |
| mt76x0_phy_rf_csr_wr_rp(struct mt76x02_dev *dev, |
| const struct mt76_reg_pair *data, |
| int n) |
| { |
| while (n-- > 0) { |
| mt76x0_rf_csr_wr(dev, data->reg, data->value); |
| data++; |
| } |
| } |
| |
| #define RF_RANDOM_WRITE(dev, tab) do { \ |
| if (mt76_is_mmio(dev)) \ |
| mt76x0_phy_rf_csr_wr_rp(dev, tab, ARRAY_SIZE(tab)); \ |
| else \ |
| mt76_wr_rp(dev, MT_MCU_MEMMAP_RF, tab, ARRAY_SIZE(tab));\ |
| } while (0) |
| |
| int mt76x0_phy_wait_bbp_ready(struct mt76x02_dev *dev) |
| { |
| int i = 20; |
| u32 val; |
| |
| do { |
| val = mt76_rr(dev, MT_BBP(CORE, 0)); |
| if (val && ~val) |
| break; |
| } while (--i); |
| |
| if (!i) { |
| dev_err(dev->mt76.dev, "Error: BBP is not ready\n"); |
| return -EIO; |
| } |
| |
| dev_dbg(dev->mt76.dev, "BBP version %08x\n", val); |
| return 0; |
| } |
| |
| static void |
| mt76x0_phy_set_band(struct mt76x02_dev *dev, enum nl80211_band band) |
| { |
| switch (band) { |
| case NL80211_BAND_2GHZ: |
| RF_RANDOM_WRITE(dev, mt76x0_rf_2g_channel_0_tab); |
| |
| mt76x0_rf_wr(dev, MT_RF(5, 0), 0x45); |
| mt76x0_rf_wr(dev, MT_RF(6, 0), 0x44); |
| |
| mt76_wr(dev, MT_TX_ALC_VGA3, 0x00050007); |
| mt76_wr(dev, MT_TX0_RF_GAIN_CORR, 0x003E0002); |
| break; |
| case NL80211_BAND_5GHZ: |
| RF_RANDOM_WRITE(dev, mt76x0_rf_5g_channel_0_tab); |
| |
| mt76x0_rf_wr(dev, MT_RF(5, 0), 0x44); |
| mt76x0_rf_wr(dev, MT_RF(6, 0), 0x45); |
| |
| mt76_wr(dev, MT_TX_ALC_VGA3, 0x00000005); |
| mt76_wr(dev, MT_TX0_RF_GAIN_CORR, 0x01010102); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void |
| mt76x0_phy_set_chan_rf_params(struct mt76x02_dev *dev, u8 channel, u16 rf_bw_band) |
| { |
| const struct mt76x0_freq_item *freq_item; |
| u16 rf_band = rf_bw_band & 0xff00; |
| u16 rf_bw = rf_bw_band & 0x00ff; |
| enum nl80211_band band; |
| bool b_sdm = false; |
| u32 mac_reg; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(mt76x0_sdm_channel); i++) { |
| if (channel == mt76x0_sdm_channel[i]) { |
| b_sdm = true; |
| break; |
| } |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(mt76x0_frequency_plan); i++) { |
| if (channel == mt76x0_frequency_plan[i].channel) { |
| rf_band = mt76x0_frequency_plan[i].band; |
| |
| if (b_sdm) |
| freq_item = &(mt76x0_sdm_frequency_plan[i]); |
| else |
| freq_item = &(mt76x0_frequency_plan[i]); |
| |
| mt76x0_rf_wr(dev, MT_RF(0, 37), freq_item->pllR37); |
| mt76x0_rf_wr(dev, MT_RF(0, 36), freq_item->pllR36); |
| mt76x0_rf_wr(dev, MT_RF(0, 35), freq_item->pllR35); |
| mt76x0_rf_wr(dev, MT_RF(0, 34), freq_item->pllR34); |
| mt76x0_rf_wr(dev, MT_RF(0, 33), freq_item->pllR33); |
| |
| mt76x0_rf_rmw(dev, MT_RF(0, 32), 0xe0, |
| freq_item->pllR32_b7b5); |
| |
| /* R32<4:0> pll_den: (Denomina - 8) */ |
| mt76x0_rf_rmw(dev, MT_RF(0, 32), MT_RF_PLL_DEN_MASK, |
| freq_item->pllR32_b4b0); |
| |
| /* R31<7:5> */ |
| mt76x0_rf_rmw(dev, MT_RF(0, 31), 0xe0, |
| freq_item->pllR31_b7b5); |
| |
| /* R31<4:0> pll_k(Nominator) */ |
| mt76x0_rf_rmw(dev, MT_RF(0, 31), MT_RF_PLL_K_MASK, |
| freq_item->pllR31_b4b0); |
| |
| /* R30<7> sdm_reset_n */ |
| if (b_sdm) { |
| mt76x0_rf_clear(dev, MT_RF(0, 30), |
| MT_RF_SDM_RESET_MASK); |
| mt76x0_rf_set(dev, MT_RF(0, 30), |
| MT_RF_SDM_RESET_MASK); |
| } else { |
| mt76x0_rf_rmw(dev, MT_RF(0, 30), |
| MT_RF_SDM_RESET_MASK, |
| freq_item->pllR30_b7); |
| } |
| |
| /* R30<6:2> sdmmash_prbs,sin */ |
| mt76x0_rf_rmw(dev, MT_RF(0, 30), |
| MT_RF_SDM_MASH_PRBS_MASK, |
| freq_item->pllR30_b6b2); |
| |
| /* R30<1> sdm_bp */ |
| mt76x0_rf_rmw(dev, MT_RF(0, 30), MT_RF_SDM_BP_MASK, |
| freq_item->pllR30_b1 << 1); |
| |
| /* R30<0> R29<7:0> (hex) pll_n */ |
| mt76x0_rf_wr(dev, MT_RF(0, 29), |
| freq_item->pll_n & 0xff); |
| |
| mt76x0_rf_rmw(dev, MT_RF(0, 30), 0x1, |
| (freq_item->pll_n >> 8) & 0x1); |
| |
| /* R28<7:6> isi_iso */ |
| mt76x0_rf_rmw(dev, MT_RF(0, 28), MT_RF_ISI_ISO_MASK, |
| freq_item->pllR28_b7b6); |
| |
| /* R28<5:4> pfd_dly */ |
| mt76x0_rf_rmw(dev, MT_RF(0, 28), MT_RF_PFD_DLY_MASK, |
| freq_item->pllR28_b5b4); |
| |
| /* R28<3:2> clksel option */ |
| mt76x0_rf_rmw(dev, MT_RF(0, 28), MT_RF_CLK_SEL_MASK, |
| freq_item->pllR28_b3b2); |
| |
| /* R28<1:0> R27<7:0> R26<7:0> (hex) sdm_k */ |
| mt76x0_rf_wr(dev, MT_RF(0, 26), |
| freq_item->pll_sdm_k & 0xff); |
| mt76x0_rf_wr(dev, MT_RF(0, 27), |
| (freq_item->pll_sdm_k >> 8) & 0xff); |
| |
| mt76x0_rf_rmw(dev, MT_RF(0, 28), 0x3, |
| (freq_item->pll_sdm_k >> 16) & 0x3); |
| |
| /* R24<1:0> xo_div */ |
| mt76x0_rf_rmw(dev, MT_RF(0, 24), MT_RF_XO_DIV_MASK, |
| freq_item->pllR24_b1b0); |
| |
| break; |
| } |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(mt76x0_rf_bw_switch_tab); i++) { |
| if (rf_bw == mt76x0_rf_bw_switch_tab[i].bw_band) { |
| mt76x0_rf_wr(dev, |
| mt76x0_rf_bw_switch_tab[i].rf_bank_reg, |
| mt76x0_rf_bw_switch_tab[i].value); |
| } else if ((rf_bw == (mt76x0_rf_bw_switch_tab[i].bw_band & 0xFF)) && |
| (rf_band & mt76x0_rf_bw_switch_tab[i].bw_band)) { |
| mt76x0_rf_wr(dev, |
| mt76x0_rf_bw_switch_tab[i].rf_bank_reg, |
| mt76x0_rf_bw_switch_tab[i].value); |
| } |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(mt76x0_rf_band_switch_tab); i++) { |
| if (mt76x0_rf_band_switch_tab[i].bw_band & rf_band) { |
| mt76x0_rf_wr(dev, |
| mt76x0_rf_band_switch_tab[i].rf_bank_reg, |
| mt76x0_rf_band_switch_tab[i].value); |
| } |
| } |
| |
| mt76_clear(dev, MT_RF_MISC, 0xc); |
| |
| band = (rf_band & RF_G_BAND) ? NL80211_BAND_2GHZ : NL80211_BAND_5GHZ; |
| if (mt76x02_ext_pa_enabled(dev, band)) { |
| /* |
| MT_RF_MISC (offset: 0x0518) |
| [2]1'b1: enable external A band PA, 1'b0: disable external A band PA |
| [3]1'b1: enable external G band PA, 1'b0: disable external G band PA |
| */ |
| if (rf_band & RF_A_BAND) |
| mt76_set(dev, MT_RF_MISC, BIT(2)); |
| else |
| mt76_set(dev, MT_RF_MISC, BIT(3)); |
| |
| /* External PA */ |
| for (i = 0; i < ARRAY_SIZE(mt76x0_rf_ext_pa_tab); i++) |
| if (mt76x0_rf_ext_pa_tab[i].bw_band & rf_band) |
| mt76x0_rf_wr(dev, |
| mt76x0_rf_ext_pa_tab[i].rf_bank_reg, |
| mt76x0_rf_ext_pa_tab[i].value); |
| } |
| |
| if (rf_band & RF_G_BAND) { |
| mt76_wr(dev, MT_TX0_RF_GAIN_ATTEN, 0x63707400); |
| /* Set Atten mode = 2 For G band, Disable Tx Inc dcoc. */ |
| mac_reg = mt76_rr(dev, MT_TX_ALC_CFG_1); |
| mac_reg &= 0x896400FF; |
| mt76_wr(dev, MT_TX_ALC_CFG_1, mac_reg); |
| } else { |
| mt76_wr(dev, MT_TX0_RF_GAIN_ATTEN, 0x686A7800); |
| /* Set Atten mode = 0 For Ext A band, Disable Tx Inc dcoc Cal. */ |
| mac_reg = mt76_rr(dev, MT_TX_ALC_CFG_1); |
| mac_reg &= 0x890400FF; |
| mt76_wr(dev, MT_TX_ALC_CFG_1, mac_reg); |
| } |
| } |
| |
| static void |
| mt76x0_phy_set_chan_bbp_params(struct mt76x02_dev *dev, u16 rf_bw_band) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(mt76x0_bbp_switch_tab); i++) { |
| const struct mt76x0_bbp_switch_item *item = &mt76x0_bbp_switch_tab[i]; |
| const struct mt76_reg_pair *pair = &item->reg_pair; |
| |
| if ((rf_bw_band & item->bw_band) != rf_bw_band) |
| continue; |
| |
| if (pair->reg == MT_BBP(AGC, 8)) { |
| u32 val = pair->value; |
| u8 gain; |
| |
| gain = FIELD_GET(MT_BBP_AGC_GAIN, val); |
| gain -= dev->cal.rx.lna_gain * 2; |
| val &= ~MT_BBP_AGC_GAIN; |
| val |= FIELD_PREP(MT_BBP_AGC_GAIN, gain); |
| mt76_wr(dev, pair->reg, val); |
| } else { |
| mt76_wr(dev, pair->reg, pair->value); |
| } |
| } |
| } |
| |
| static void mt76x0_phy_ant_select(struct mt76x02_dev *dev) |
| { |
| u16 ee_ant = mt76x02_eeprom_get(dev, MT_EE_ANTENNA); |
| u16 nic_conf2 = mt76x02_eeprom_get(dev, MT_EE_NIC_CONF_2); |
| u32 wlan, coex3, cmb; |
| bool ant_div; |
| |
| wlan = mt76_rr(dev, MT_WLAN_FUN_CTRL); |
| cmb = mt76_rr(dev, MT_CMB_CTRL); |
| coex3 = mt76_rr(dev, MT_COEXCFG3); |
| |
| cmb &= ~(BIT(14) | BIT(12)); |
| wlan &= ~(BIT(6) | BIT(5)); |
| coex3 &= ~GENMASK(5, 2); |
| |
| if (ee_ant & MT_EE_ANTENNA_DUAL) { |
| /* dual antenna mode */ |
| ant_div = !(nic_conf2 & MT_EE_NIC_CONF_2_ANT_OPT) && |
| (nic_conf2 & MT_EE_NIC_CONF_2_ANT_DIV); |
| if (ant_div) |
| cmb |= BIT(12); |
| else |
| coex3 |= BIT(4); |
| coex3 |= BIT(3); |
| if (dev->mt76.cap.has_2ghz) |
| wlan |= BIT(6); |
| } else { |
| /* sigle antenna mode */ |
| if (dev->mt76.cap.has_5ghz) { |
| coex3 |= BIT(3) | BIT(4); |
| } else { |
| wlan |= BIT(6); |
| coex3 |= BIT(1); |
| } |
| } |
| |
| if (is_mt7630(dev)) |
| cmb |= BIT(14) | BIT(11); |
| |
| mt76_wr(dev, MT_WLAN_FUN_CTRL, wlan); |
| mt76_wr(dev, MT_CMB_CTRL, cmb); |
| mt76_clear(dev, MT_COEXCFG0, BIT(2)); |
| mt76_wr(dev, MT_COEXCFG3, coex3); |
| } |
| |
| static void |
| mt76x0_phy_bbp_set_bw(struct mt76x02_dev *dev, enum nl80211_chan_width width) |
| { |
| enum { BW_20 = 0, BW_40 = 1, BW_80 = 2, BW_10 = 4}; |
| int bw; |
| |
| switch (width) { |
| default: |
| case NL80211_CHAN_WIDTH_20_NOHT: |
| case NL80211_CHAN_WIDTH_20: |
| bw = BW_20; |
| break; |
| case NL80211_CHAN_WIDTH_40: |
| bw = BW_40; |
| break; |
| case NL80211_CHAN_WIDTH_80: |
| bw = BW_80; |
| break; |
| case NL80211_CHAN_WIDTH_10: |
| bw = BW_10; |
| break; |
| case NL80211_CHAN_WIDTH_80P80: |
| case NL80211_CHAN_WIDTH_160: |
| case NL80211_CHAN_WIDTH_5: |
| /* TODO error */ |
| return ; |
| } |
| |
| mt76x02_mcu_function_select(dev, BW_SETTING, bw); |
| } |
| |
| static void mt76x0_phy_tssi_dc_calibrate(struct mt76x02_dev *dev) |
| { |
| struct ieee80211_channel *chan = dev->mt76.chandef.chan; |
| u32 val; |
| |
| if (chan->band == NL80211_BAND_5GHZ) |
| mt76x0_rf_clear(dev, MT_RF(0, 67), 0xf); |
| |
| /* bypass ADDA control */ |
| mt76_wr(dev, MT_RF_SETTING_0, 0x60002237); |
| mt76_wr(dev, MT_RF_BYPASS_0, 0xffffffff); |
| |
| /* bbp sw reset */ |
| mt76_set(dev, MT_BBP(CORE, 4), BIT(0)); |
| usleep_range(500, 1000); |
| mt76_clear(dev, MT_BBP(CORE, 4), BIT(0)); |
| |
| val = (chan->band == NL80211_BAND_5GHZ) ? 0x80055 : 0x80050; |
| mt76_wr(dev, MT_BBP(CORE, 34), val); |
| |
| /* enable TX with DAC0 input */ |
| mt76_wr(dev, MT_BBP(TXBE, 6), BIT(31)); |
| |
| mt76_poll_msec(dev, MT_BBP(CORE, 34), BIT(4), 0, 200); |
| dev->cal.tssi_dc = mt76_rr(dev, MT_BBP(CORE, 35)) & 0xff; |
| |
| /* stop bypass ADDA */ |
| mt76_wr(dev, MT_RF_BYPASS_0, 0); |
| /* stop TX */ |
| mt76_wr(dev, MT_BBP(TXBE, 6), 0); |
| /* bbp sw reset */ |
| mt76_set(dev, MT_BBP(CORE, 4), BIT(0)); |
| usleep_range(500, 1000); |
| mt76_clear(dev, MT_BBP(CORE, 4), BIT(0)); |
| |
| if (chan->band == NL80211_BAND_5GHZ) |
| mt76x0_rf_rmw(dev, MT_RF(0, 67), 0xf, 0x4); |
| } |
| |
| static int |
| mt76x0_phy_tssi_adc_calibrate(struct mt76x02_dev *dev, s16 *ltssi, |
| u8 *info) |
| { |
| struct ieee80211_channel *chan = dev->mt76.chandef.chan; |
| u32 val; |
| |
| val = (chan->band == NL80211_BAND_5GHZ) ? 0x80055 : 0x80050; |
| mt76_wr(dev, MT_BBP(CORE, 34), val); |
| |
| if (!mt76_poll_msec(dev, MT_BBP(CORE, 34), BIT(4), 0, 200)) { |
| mt76_clear(dev, MT_BBP(CORE, 34), BIT(4)); |
| return -ETIMEDOUT; |
| } |
| |
| *ltssi = mt76_rr(dev, MT_BBP(CORE, 35)) & 0xff; |
| if (chan->band == NL80211_BAND_5GHZ) |
| *ltssi += 128; |
| |
| /* set packet info#1 mode */ |
| mt76_wr(dev, MT_BBP(CORE, 34), 0x80041); |
| info[0] = mt76_rr(dev, MT_BBP(CORE, 35)) & 0xff; |
| |
| /* set packet info#2 mode */ |
| mt76_wr(dev, MT_BBP(CORE, 34), 0x80042); |
| info[1] = mt76_rr(dev, MT_BBP(CORE, 35)) & 0xff; |
| |
| /* set packet info#3 mode */ |
| mt76_wr(dev, MT_BBP(CORE, 34), 0x80043); |
| info[2] = mt76_rr(dev, MT_BBP(CORE, 35)) & 0xff; |
| |
| return 0; |
| } |
| |
| static u8 mt76x0_phy_get_rf_pa_mode(struct mt76x02_dev *dev, |
| int index, u8 tx_rate) |
| { |
| u32 val, reg; |
| |
| reg = (index == 1) ? MT_RF_PA_MODE_CFG1 : MT_RF_PA_MODE_CFG0; |
| val = mt76_rr(dev, reg); |
| return (val & (3 << (tx_rate * 2))) >> (tx_rate * 2); |
| } |
| |
| static int |
| mt76x0_phy_get_target_power(struct mt76x02_dev *dev, u8 tx_mode, |
| u8 *info, s8 *target_power, |
| s8 *target_pa_power) |
| { |
| u8 tx_rate, cur_power; |
| |
| cur_power = mt76_rr(dev, MT_TX_ALC_CFG_0) & MT_TX_ALC_CFG_0_CH_INIT_0; |
| switch (tx_mode) { |
| case 0: |
| /* cck rates */ |
| tx_rate = (info[0] & 0x60) >> 5; |
| if (tx_rate > 3) |
| return -EINVAL; |
| |
| *target_power = cur_power + dev->mt76.rate_power.cck[tx_rate]; |
| *target_pa_power = mt76x0_phy_get_rf_pa_mode(dev, 0, tx_rate); |
| break; |
| case 1: { |
| u8 index; |
| |
| /* ofdm rates */ |
| tx_rate = (info[0] & 0xf0) >> 4; |
| switch (tx_rate) { |
| case 0xb: |
| index = 0; |
| break; |
| case 0xf: |
| index = 1; |
| break; |
| case 0xa: |
| index = 2; |
| break; |
| case 0xe: |
| index = 3; |
| break; |
| case 0x9: |
| index = 4; |
| break; |
| case 0xd: |
| index = 5; |
| break; |
| case 0x8: |
| index = 6; |
| break; |
| case 0xc: |
| index = 7; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| *target_power = cur_power + dev->mt76.rate_power.ofdm[index]; |
| *target_pa_power = mt76x0_phy_get_rf_pa_mode(dev, 0, index + 4); |
| break; |
| } |
| case 4: |
| /* vht rates */ |
| tx_rate = info[1] & 0xf; |
| if (tx_rate > 9) |
| return -EINVAL; |
| |
| *target_power = cur_power + dev->mt76.rate_power.vht[tx_rate]; |
| *target_pa_power = mt76x0_phy_get_rf_pa_mode(dev, 1, tx_rate); |
| break; |
| default: |
| /* ht rates */ |
| tx_rate = info[1] & 0x7f; |
| if (tx_rate > 9) |
| return -EINVAL; |
| |
| *target_power = cur_power + dev->mt76.rate_power.ht[tx_rate]; |
| *target_pa_power = mt76x0_phy_get_rf_pa_mode(dev, 1, tx_rate); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static s16 mt76x0_phy_lin2db(u16 val) |
| { |
| u32 mantissa = val << 4; |
| int ret, data; |
| s16 exp = -4; |
| |
| while (mantissa < BIT(15)) { |
| mantissa <<= 1; |
| if (--exp < -20) |
| return -10000; |
| } |
| while (mantissa > 0xffff) { |
| mantissa >>= 1; |
| if (++exp > 20) |
| return -10000; |
| } |
| |
| /* s(15,0) */ |
| if (mantissa <= 47104) |
| data = mantissa + (mantissa >> 3) + (mantissa >> 4) - 38400; |
| else |
| data = mantissa - (mantissa >> 3) - (mantissa >> 6) - 23040; |
| data = max_t(int, 0, data); |
| |
| ret = ((15 + exp) << 15) + data; |
| ret = (ret << 2) + (ret << 1) + (ret >> 6) + (ret >> 7); |
| return ret >> 10; |
| } |
| |
| static int |
| mt76x0_phy_get_delta_power(struct mt76x02_dev *dev, u8 tx_mode, |
| s8 target_power, s8 target_pa_power, |
| s16 ltssi) |
| { |
| struct ieee80211_channel *chan = dev->mt76.chandef.chan; |
| int tssi_target = target_power << 12, tssi_slope; |
| int tssi_offset, tssi_db, ret; |
| u32 data; |
| u16 val; |
| |
| if (chan->band == NL80211_BAND_5GHZ) { |
| u8 bound[7]; |
| int i, err; |
| |
| err = mt76x02_eeprom_copy(dev, MT_EE_TSSI_BOUND1, bound, |
| sizeof(bound)); |
| if (err < 0) |
| return err; |
| |
| for (i = 0; i < ARRAY_SIZE(bound); i++) { |
| if (chan->hw_value <= bound[i] || !bound[i]) |
| break; |
| } |
| val = mt76x02_eeprom_get(dev, MT_EE_TSSI_SLOPE_5G + i * 2); |
| |
| tssi_offset = val >> 8; |
| if ((tssi_offset >= 64 && tssi_offset <= 127) || |
| (tssi_offset & BIT(7))) |
| tssi_offset -= BIT(8); |
| } else { |
| val = mt76x02_eeprom_get(dev, MT_EE_TSSI_SLOPE_2G); |
| |
| tssi_offset = val >> 8; |
| if (tssi_offset & BIT(7)) |
| tssi_offset -= BIT(8); |
| } |
| tssi_slope = val & 0xff; |
| |
| switch (target_pa_power) { |
| case 1: |
| if (chan->band == NL80211_BAND_2GHZ) |
| tssi_target += 29491; /* 3.6 * 8192 */ |
| /* fall through */ |
| case 0: |
| break; |
| default: |
| tssi_target += 4424; /* 0.54 * 8192 */ |
| break; |
| } |
| |
| if (!tx_mode) { |
| data = mt76_rr(dev, MT_BBP(CORE, 1)); |
| if (is_mt7630(dev) && mt76_is_mmio(dev)) { |
| int offset; |
| |
| /* 2.3 * 8192 or 1.5 * 8192 */ |
| offset = (data & BIT(5)) ? 18841 : 12288; |
| tssi_target += offset; |
| } else if (data & BIT(5)) { |
| /* 0.8 * 8192 */ |
| tssi_target += 6554; |
| } |
| } |
| |
| data = mt76_rr(dev, MT_BBP(TXBE, 4)); |
| switch (data & 0x3) { |
| case 1: |
| tssi_target -= 49152; /* -6db * 8192 */ |
| break; |
| case 2: |
| tssi_target -= 98304; /* -12db * 8192 */ |
| break; |
| case 3: |
| tssi_target += 49152; /* 6db * 8192 */ |
| break; |
| default: |
| break; |
| } |
| |
| tssi_db = mt76x0_phy_lin2db(ltssi - dev->cal.tssi_dc) * tssi_slope; |
| if (chan->band == NL80211_BAND_5GHZ) { |
| tssi_db += ((tssi_offset - 50) << 10); /* offset s4.3 */ |
| tssi_target -= tssi_db; |
| if (ltssi > 254 && tssi_target > 0) { |
| /* upper saturate */ |
| tssi_target = 0; |
| } |
| } else { |
| tssi_db += (tssi_offset << 9); /* offset s3.4 */ |
| tssi_target -= tssi_db; |
| /* upper-lower saturate */ |
| if ((ltssi > 126 && tssi_target > 0) || |
| ((ltssi - dev->cal.tssi_dc) < 1 && tssi_target < 0)) { |
| tssi_target = 0; |
| } |
| } |
| |
| if ((dev->cal.tssi_target ^ tssi_target) < 0 && |
| dev->cal.tssi_target > -4096 && dev->cal.tssi_target < 4096 && |
| tssi_target > -4096 && tssi_target < 4096) { |
| if ((tssi_target < 0 && |
| tssi_target + dev->cal.tssi_target > 0) || |
| (tssi_target > 0 && |
| tssi_target + dev->cal.tssi_target <= 0)) |
| tssi_target = 0; |
| else |
| dev->cal.tssi_target = tssi_target; |
| } else { |
| dev->cal.tssi_target = tssi_target; |
| } |
| |
| /* make the compensate value to the nearest compensate code */ |
| if (tssi_target > 0) |
| tssi_target += 2048; |
| else |
| tssi_target -= 2048; |
| tssi_target >>= 12; |
| |
| ret = mt76_get_field(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP); |
| if (ret & BIT(5)) |
| ret -= BIT(6); |
| ret += tssi_target; |
| |
| ret = min_t(int, 31, ret); |
| return max_t(int, -32, ret); |
| } |
| |
| static void mt76x0_phy_tssi_calibrate(struct mt76x02_dev *dev) |
| { |
| s8 target_power, target_pa_power; |
| u8 tssi_info[3], tx_mode; |
| s16 ltssi; |
| s8 val; |
| |
| if (mt76x0_phy_tssi_adc_calibrate(dev, <ssi, tssi_info) < 0) |
| return; |
| |
| tx_mode = tssi_info[0] & 0x7; |
| if (mt76x0_phy_get_target_power(dev, tx_mode, tssi_info, |
| &target_power, &target_pa_power) < 0) |
| return; |
| |
| val = mt76x0_phy_get_delta_power(dev, tx_mode, target_power, |
| target_pa_power, ltssi); |
| mt76_rmw_field(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP, val); |
| } |
| |
| void mt76x0_phy_set_txpower(struct mt76x02_dev *dev) |
| { |
| struct mt76_rate_power *t = &dev->mt76.rate_power; |
| s8 info; |
| |
| mt76x0_get_tx_power_per_rate(dev); |
| mt76x0_get_power_info(dev, &info); |
| |
| mt76x02_add_rate_power_offset(t, info); |
| mt76x02_limit_rate_power(t, dev->mt76.txpower_conf); |
| dev->mt76.txpower_cur = mt76x02_get_max_rate_power(t); |
| mt76x02_add_rate_power_offset(t, -info); |
| |
| mt76x02_phy_set_txpower(dev, info, info); |
| } |
| |
| void mt76x0_phy_calibrate(struct mt76x02_dev *dev, bool power_on) |
| { |
| struct ieee80211_channel *chan = dev->mt76.chandef.chan; |
| int is_5ghz = (chan->band == NL80211_BAND_5GHZ) ? 1 : 0; |
| u32 val, tx_alc, reg_val; |
| |
| if (is_mt7630(dev)) |
| return; |
| |
| if (power_on) { |
| mt76x02_mcu_calibrate(dev, MCU_CAL_R, 0); |
| mt76x02_mcu_calibrate(dev, MCU_CAL_VCO, chan->hw_value); |
| usleep_range(10, 20); |
| |
| if (mt76x0_tssi_enabled(dev)) { |
| mt76_wr(dev, MT_MAC_SYS_CTRL, |
| MT_MAC_SYS_CTRL_ENABLE_RX); |
| mt76x0_phy_tssi_dc_calibrate(dev); |
| mt76_wr(dev, MT_MAC_SYS_CTRL, |
| MT_MAC_SYS_CTRL_ENABLE_TX | |
| MT_MAC_SYS_CTRL_ENABLE_RX); |
| } |
| } |
| |
| tx_alc = mt76_rr(dev, MT_TX_ALC_CFG_0); |
| mt76_wr(dev, MT_TX_ALC_CFG_0, 0); |
| usleep_range(500, 700); |
| |
| reg_val = mt76_rr(dev, MT_BBP(IBI, 9)); |
| mt76_wr(dev, MT_BBP(IBI, 9), 0xffffff7e); |
| |
| if (is_5ghz) { |
| if (chan->hw_value < 100) |
| val = 0x701; |
| else if (chan->hw_value < 140) |
| val = 0x801; |
| else |
| val = 0x901; |
| } else { |
| val = 0x600; |
| } |
| |
| mt76x02_mcu_calibrate(dev, MCU_CAL_FULL, val); |
| msleep(350); |
| mt76x02_mcu_calibrate(dev, MCU_CAL_LC, is_5ghz); |
| usleep_range(15000, 20000); |
| |
| mt76_wr(dev, MT_BBP(IBI, 9), reg_val); |
| mt76_wr(dev, MT_TX_ALC_CFG_0, tx_alc); |
| mt76x02_mcu_calibrate(dev, MCU_CAL_RXDCOC, 1); |
| } |
| EXPORT_SYMBOL_GPL(mt76x0_phy_calibrate); |
| |
| int mt76x0_phy_set_channel(struct mt76x02_dev *dev, |
| struct cfg80211_chan_def *chandef) |
| { |
| u32 ext_cca_chan[4] = { |
| [0] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 0) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 1) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 2) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 3) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(0)), |
| [1] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 1) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 0) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 2) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 3) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(1)), |
| [2] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 2) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 3) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 1) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 0) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(2)), |
| [3] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 3) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 2) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 1) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 0) | |
| FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(3)), |
| }; |
| bool scan = test_bit(MT76_SCANNING, &dev->mt76.state); |
| int ch_group_index, freq, freq1; |
| u8 channel; |
| u32 val; |
| u16 rf_bw_band; |
| |
| freq = chandef->chan->center_freq; |
| freq1 = chandef->center_freq1; |
| channel = chandef->chan->hw_value; |
| rf_bw_band = (channel <= 14) ? RF_G_BAND : RF_A_BAND; |
| dev->mt76.chandef = *chandef; |
| |
| switch (chandef->width) { |
| case NL80211_CHAN_WIDTH_40: |
| if (freq1 > freq) |
| ch_group_index = 0; |
| else |
| ch_group_index = 1; |
| channel += 2 - ch_group_index * 4; |
| rf_bw_band |= RF_BW_40; |
| break; |
| case NL80211_CHAN_WIDTH_80: |
| ch_group_index = (freq - freq1 + 30) / 20; |
| if (WARN_ON(ch_group_index < 0 || ch_group_index > 3)) |
| ch_group_index = 0; |
| channel += 6 - ch_group_index * 4; |
| rf_bw_band |= RF_BW_80; |
| break; |
| default: |
| ch_group_index = 0; |
| rf_bw_band |= RF_BW_20; |
| break; |
| } |
| |
| if (mt76_is_usb(dev)) { |
| mt76x0_phy_bbp_set_bw(dev, chandef->width); |
| } else { |
| if (chandef->width == NL80211_CHAN_WIDTH_80 || |
| chandef->width == NL80211_CHAN_WIDTH_40) |
| val = 0x201; |
| else |
| val = 0x601; |
| mt76_wr(dev, MT_TX_SW_CFG0, val); |
| } |
| mt76x02_phy_set_bw(dev, chandef->width, ch_group_index); |
| mt76x02_phy_set_band(dev, chandef->chan->band, |
| ch_group_index & 1); |
| |
| mt76_rmw(dev, MT_EXT_CCA_CFG, |
| (MT_EXT_CCA_CFG_CCA0 | |
| MT_EXT_CCA_CFG_CCA1 | |
| MT_EXT_CCA_CFG_CCA2 | |
| MT_EXT_CCA_CFG_CCA3 | |
| MT_EXT_CCA_CFG_CCA_MASK), |
| ext_cca_chan[ch_group_index]); |
| |
| mt76x0_phy_set_band(dev, chandef->chan->band); |
| mt76x0_phy_set_chan_rf_params(dev, channel, rf_bw_band); |
| |
| /* set Japan Tx filter at channel 14 */ |
| if (channel == 14) |
| mt76_set(dev, MT_BBP(CORE, 1), 0x20); |
| else |
| mt76_clear(dev, MT_BBP(CORE, 1), 0x20); |
| |
| mt76x0_read_rx_gain(dev); |
| mt76x0_phy_set_chan_bbp_params(dev, rf_bw_band); |
| |
| /* enable vco */ |
| mt76x0_rf_set(dev, MT_RF(0, 4), BIT(7)); |
| if (scan) |
| return 0; |
| |
| mt76x02_init_agc_gain(dev); |
| mt76x0_phy_calibrate(dev, false); |
| mt76x0_phy_set_txpower(dev); |
| |
| ieee80211_queue_delayed_work(dev->mt76.hw, &dev->cal_work, |
| MT_CALIBRATE_INTERVAL); |
| |
| return 0; |
| } |
| |
| static void mt76x0_phy_temp_sensor(struct mt76x02_dev *dev) |
| { |
| u8 rf_b7_73, rf_b0_66, rf_b0_67; |
| s8 val; |
| |
| rf_b7_73 = mt76x0_rf_rr(dev, MT_RF(7, 73)); |
| rf_b0_66 = mt76x0_rf_rr(dev, MT_RF(0, 66)); |
| rf_b0_67 = mt76x0_rf_rr(dev, MT_RF(0, 67)); |
| |
| mt76x0_rf_wr(dev, MT_RF(7, 73), 0x02); |
| mt76x0_rf_wr(dev, MT_RF(0, 66), 0x23); |
| mt76x0_rf_wr(dev, MT_RF(0, 67), 0x01); |
| |
| mt76_wr(dev, MT_BBP(CORE, 34), 0x00080055); |
| if (!mt76_poll_msec(dev, MT_BBP(CORE, 34), BIT(4), 0, 200)) { |
| mt76_clear(dev, MT_BBP(CORE, 34), BIT(4)); |
| goto done; |
| } |
| |
| val = mt76_rr(dev, MT_BBP(CORE, 35)); |
| val = (35 * (val - dev->cal.rx.temp_offset)) / 10 + 25; |
| |
| if (abs(val - dev->cal.temp_vco) > 20) { |
| mt76x02_mcu_calibrate(dev, MCU_CAL_VCO, |
| dev->mt76.chandef.chan->hw_value); |
| dev->cal.temp_vco = val; |
| } |
| if (abs(val - dev->cal.temp) > 30) { |
| mt76x0_phy_calibrate(dev, false); |
| dev->cal.temp = val; |
| } |
| |
| done: |
| mt76x0_rf_wr(dev, MT_RF(7, 73), rf_b7_73); |
| mt76x0_rf_wr(dev, MT_RF(0, 66), rf_b0_66); |
| mt76x0_rf_wr(dev, MT_RF(0, 67), rf_b0_67); |
| } |
| |
| static void mt76x0_phy_set_gain_val(struct mt76x02_dev *dev) |
| { |
| u8 gain = dev->cal.agc_gain_cur[0] - dev->cal.agc_gain_adjust; |
| |
| mt76_rmw_field(dev, MT_BBP(AGC, 8), MT_BBP_AGC_GAIN, gain); |
| |
| if ((dev->mt76.chandef.chan->flags & IEEE80211_CHAN_RADAR) && |
| !is_mt7630(dev)) |
| mt76x02_phy_dfs_adjust_agc(dev); |
| } |
| |
| static void |
| mt76x0_phy_update_channel_gain(struct mt76x02_dev *dev) |
| { |
| bool gain_change; |
| u8 gain_delta; |
| int low_gain; |
| |
| dev->cal.avg_rssi_all = mt76x02_phy_get_min_avg_rssi(dev); |
| |
| low_gain = (dev->cal.avg_rssi_all > mt76x02_get_rssi_gain_thresh(dev)) + |
| (dev->cal.avg_rssi_all > mt76x02_get_low_rssi_gain_thresh(dev)); |
| |
| gain_change = dev->cal.low_gain < 0 || |
| (dev->cal.low_gain & 2) ^ (low_gain & 2); |
| dev->cal.low_gain = low_gain; |
| |
| if (!gain_change) { |
| if (mt76x02_phy_adjust_vga_gain(dev)) |
| mt76x0_phy_set_gain_val(dev); |
| return; |
| } |
| |
| dev->cal.agc_gain_adjust = (low_gain == 2) ? 0 : 10; |
| gain_delta = (low_gain == 2) ? 10 : 0; |
| |
| dev->cal.agc_gain_cur[0] = dev->cal.agc_gain_init[0] - gain_delta; |
| mt76x0_phy_set_gain_val(dev); |
| |
| /* clear false CCA counters */ |
| mt76_rr(dev, MT_RX_STAT_1); |
| } |
| |
| static void mt76x0_phy_calibration_work(struct work_struct *work) |
| { |
| struct mt76x02_dev *dev = container_of(work, struct mt76x02_dev, |
| cal_work.work); |
| |
| mt76x0_phy_update_channel_gain(dev); |
| if (mt76x0_tssi_enabled(dev)) |
| mt76x0_phy_tssi_calibrate(dev); |
| else |
| mt76x0_phy_temp_sensor(dev); |
| |
| ieee80211_queue_delayed_work(dev->mt76.hw, &dev->cal_work, |
| 4 * MT_CALIBRATE_INTERVAL); |
| } |
| |
| static void mt76x0_rf_patch_reg_array(struct mt76x02_dev *dev, |
| const struct mt76_reg_pair *rp, int len) |
| { |
| int i; |
| |
| for (i = 0; i < len; i++) { |
| u32 reg = rp[i].reg; |
| u8 val = rp[i].value; |
| |
| switch (reg) { |
| case MT_RF(0, 3): |
| if (mt76_is_mmio(dev)) { |
| if (is_mt7630(dev)) |
| val = 0x70; |
| else |
| val = 0x63; |
| } else { |
| val = 0x73; |
| } |
| break; |
| case MT_RF(0, 21): |
| if (is_mt7610e(dev)) |
| val = 0x10; |
| else |
| val = 0x12; |
| break; |
| case MT_RF(5, 2): |
| if (is_mt7630(dev)) |
| val = 0x1d; |
| else if (is_mt7610e(dev)) |
| val = 0x00; |
| else |
| val = 0x0c; |
| break; |
| default: |
| break; |
| } |
| mt76x0_rf_wr(dev, reg, val); |
| } |
| } |
| |
| static void mt76x0_phy_rf_init(struct mt76x02_dev *dev) |
| { |
| int i; |
| u8 val; |
| |
| mt76x0_rf_patch_reg_array(dev, mt76x0_rf_central_tab, |
| ARRAY_SIZE(mt76x0_rf_central_tab)); |
| mt76x0_rf_patch_reg_array(dev, mt76x0_rf_2g_channel_0_tab, |
| ARRAY_SIZE(mt76x0_rf_2g_channel_0_tab)); |
| RF_RANDOM_WRITE(dev, mt76x0_rf_5g_channel_0_tab); |
| RF_RANDOM_WRITE(dev, mt76x0_rf_vga_channel_0_tab); |
| |
| for (i = 0; i < ARRAY_SIZE(mt76x0_rf_bw_switch_tab); i++) { |
| const struct mt76x0_rf_switch_item *item = &mt76x0_rf_bw_switch_tab[i]; |
| |
| if (item->bw_band == RF_BW_20) |
| mt76x0_rf_wr(dev, item->rf_bank_reg, item->value); |
| else if (((RF_G_BAND | RF_BW_20) & item->bw_band) == (RF_G_BAND | RF_BW_20)) |
| mt76x0_rf_wr(dev, item->rf_bank_reg, item->value); |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(mt76x0_rf_band_switch_tab); i++) { |
| if (mt76x0_rf_band_switch_tab[i].bw_band & RF_G_BAND) { |
| mt76x0_rf_wr(dev, |
| mt76x0_rf_band_switch_tab[i].rf_bank_reg, |
| mt76x0_rf_band_switch_tab[i].value); |
| } |
| } |
| |
| /* |
| Frequency calibration |
| E1: B0.R22<6:0>: xo_cxo<6:0> |
| E2: B0.R21<0>: xo_cxo<0>, B0.R22<7:0>: xo_cxo<8:1> |
| */ |
| mt76x0_rf_wr(dev, MT_RF(0, 22), |
| min_t(u8, dev->cal.rx.freq_offset, 0xbf)); |
| val = mt76x0_rf_rr(dev, MT_RF(0, 22)); |
| |
| /* Reset procedure DAC during power-up: |
| * - set B0.R73<7> |
| * - clear B0.R73<7> |
| * - set B0.R73<7> |
| */ |
| mt76x0_rf_set(dev, MT_RF(0, 73), BIT(7)); |
| mt76x0_rf_clear(dev, MT_RF(0, 73), BIT(7)); |
| mt76x0_rf_set(dev, MT_RF(0, 73), BIT(7)); |
| |
| /* vcocal_en: initiate VCO calibration (reset after completion)) */ |
| mt76x0_rf_set(dev, MT_RF(0, 4), 0x80); |
| } |
| |
| void mt76x0_phy_init(struct mt76x02_dev *dev) |
| { |
| INIT_DELAYED_WORK(&dev->cal_work, mt76x0_phy_calibration_work); |
| |
| mt76x0_phy_ant_select(dev); |
| mt76x0_phy_rf_init(dev); |
| mt76x02_phy_set_rxpath(dev); |
| mt76x02_phy_set_txdac(dev); |
| } |