| // SPDX-License-Identifier: MIT |
| /* |
| * Copyright © 2014-2018 Intel Corporation |
| */ |
| |
| #include "i915_drv.h" |
| #include "i915_reg.h" |
| #include "intel_context.h" |
| #include "intel_engine_pm.h" |
| #include "intel_engine_regs.h" |
| #include "intel_gpu_commands.h" |
| #include "intel_gt.h" |
| #include "intel_gt_mcr.h" |
| #include "intel_gt_print.h" |
| #include "intel_gt_regs.h" |
| #include "intel_ring.h" |
| #include "intel_workarounds.h" |
| |
| /** |
| * DOC: Hardware workarounds |
| * |
| * Hardware workarounds are register programming documented to be executed in |
| * the driver that fall outside of the normal programming sequences for a |
| * platform. There are some basic categories of workarounds, depending on |
| * how/when they are applied: |
| * |
| * - Context workarounds: workarounds that touch registers that are |
| * saved/restored to/from the HW context image. The list is emitted (via Load |
| * Register Immediate commands) once when initializing the device and saved in |
| * the default context. That default context is then used on every context |
| * creation to have a "primed golden context", i.e. a context image that |
| * already contains the changes needed to all the registers. |
| * |
| * Context workarounds should be implemented in the \*_ctx_workarounds_init() |
| * variants respective to the targeted platforms. |
| * |
| * - Engine workarounds: the list of these WAs is applied whenever the specific |
| * engine is reset. It's also possible that a set of engine classes share a |
| * common power domain and they are reset together. This happens on some |
| * platforms with render and compute engines. In this case (at least) one of |
| * them need to keeep the workaround programming: the approach taken in the |
| * driver is to tie those workarounds to the first compute/render engine that |
| * is registered. When executing with GuC submission, engine resets are |
| * outside of kernel driver control, hence the list of registers involved in |
| * written once, on engine initialization, and then passed to GuC, that |
| * saves/restores their values before/after the reset takes place. See |
| * ``drivers/gpu/drm/i915/gt/uc/intel_guc_ads.c`` for reference. |
| * |
| * Workarounds for registers specific to RCS and CCS should be implemented in |
| * rcs_engine_wa_init() and ccs_engine_wa_init(), respectively; those for |
| * registers belonging to BCS, VCS or VECS should be implemented in |
| * xcs_engine_wa_init(). Workarounds for registers not belonging to a specific |
| * engine's MMIO range but that are part of of the common RCS/CCS reset domain |
| * should be implemented in general_render_compute_wa_init(). |
| * |
| * - GT workarounds: the list of these WAs is applied whenever these registers |
| * revert to their default values: on GPU reset, suspend/resume [1]_, etc. |
| * |
| * GT workarounds should be implemented in the \*_gt_workarounds_init() |
| * variants respective to the targeted platforms. |
| * |
| * - Register whitelist: some workarounds need to be implemented in userspace, |
| * but need to touch privileged registers. The whitelist in the kernel |
| * instructs the hardware to allow the access to happen. From the kernel side, |
| * this is just a special case of a MMIO workaround (as we write the list of |
| * these to/be-whitelisted registers to some special HW registers). |
| * |
| * Register whitelisting should be done in the \*_whitelist_build() variants |
| * respective to the targeted platforms. |
| * |
| * - Workaround batchbuffers: buffers that get executed automatically by the |
| * hardware on every HW context restore. These buffers are created and |
| * programmed in the default context so the hardware always go through those |
| * programming sequences when switching contexts. The support for workaround |
| * batchbuffers is enabled these hardware mechanisms: |
| * |
| * #. INDIRECT_CTX: A batchbuffer and an offset are provided in the default |
| * context, pointing the hardware to jump to that location when that offset |
| * is reached in the context restore. Workaround batchbuffer in the driver |
| * currently uses this mechanism for all platforms. |
| * |
| * #. BB_PER_CTX_PTR: A batchbuffer is provided in the default context, |
| * pointing the hardware to a buffer to continue executing after the |
| * engine registers are restored in a context restore sequence. This is |
| * currently not used in the driver. |
| * |
| * - Other: There are WAs that, due to their nature, cannot be applied from a |
| * central place. Those are peppered around the rest of the code, as needed. |
| * Workarounds related to the display IP are the main example. |
| * |
| * .. [1] Technically, some registers are powercontext saved & restored, so they |
| * survive a suspend/resume. In practice, writing them again is not too |
| * costly and simplifies things, so it's the approach taken in the driver. |
| */ |
| |
| static void wa_init_start(struct i915_wa_list *wal, struct intel_gt *gt, |
| const char *name, const char *engine_name) |
| { |
| wal->gt = gt; |
| wal->name = name; |
| wal->engine_name = engine_name; |
| } |
| |
| #define WA_LIST_CHUNK (1 << 4) |
| |
| static void wa_init_finish(struct i915_wa_list *wal) |
| { |
| /* Trim unused entries. */ |
| if (!IS_ALIGNED(wal->count, WA_LIST_CHUNK)) { |
| struct i915_wa *list = kmemdup(wal->list, |
| wal->count * sizeof(*list), |
| GFP_KERNEL); |
| |
| if (list) { |
| kfree(wal->list); |
| wal->list = list; |
| } |
| } |
| |
| if (!wal->count) |
| return; |
| |
| gt_dbg(wal->gt, "Initialized %u %s workarounds on %s\n", |
| wal->wa_count, wal->name, wal->engine_name); |
| } |
| |
| static enum forcewake_domains |
| wal_get_fw_for_rmw(struct intel_uncore *uncore, const struct i915_wa_list *wal) |
| { |
| enum forcewake_domains fw = 0; |
| struct i915_wa *wa; |
| unsigned int i; |
| |
| for (i = 0, wa = wal->list; i < wal->count; i++, wa++) |
| fw |= intel_uncore_forcewake_for_reg(uncore, |
| wa->reg, |
| FW_REG_READ | |
| FW_REG_WRITE); |
| |
| return fw; |
| } |
| |
| static void _wa_add(struct i915_wa_list *wal, const struct i915_wa *wa) |
| { |
| unsigned int addr = i915_mmio_reg_offset(wa->reg); |
| struct drm_i915_private *i915 = wal->gt->i915; |
| unsigned int start = 0, end = wal->count; |
| const unsigned int grow = WA_LIST_CHUNK; |
| struct i915_wa *wa_; |
| |
| GEM_BUG_ON(!is_power_of_2(grow)); |
| |
| if (IS_ALIGNED(wal->count, grow)) { /* Either uninitialized or full. */ |
| struct i915_wa *list; |
| |
| list = kmalloc_array(ALIGN(wal->count + 1, grow), sizeof(*wa), |
| GFP_KERNEL); |
| if (!list) { |
| drm_err(&i915->drm, "No space for workaround init!\n"); |
| return; |
| } |
| |
| if (wal->list) { |
| memcpy(list, wal->list, sizeof(*wa) * wal->count); |
| kfree(wal->list); |
| } |
| |
| wal->list = list; |
| } |
| |
| while (start < end) { |
| unsigned int mid = start + (end - start) / 2; |
| |
| if (i915_mmio_reg_offset(wal->list[mid].reg) < addr) { |
| start = mid + 1; |
| } else if (i915_mmio_reg_offset(wal->list[mid].reg) > addr) { |
| end = mid; |
| } else { |
| wa_ = &wal->list[mid]; |
| |
| if ((wa->clr | wa_->clr) && !(wa->clr & ~wa_->clr)) { |
| drm_err(&i915->drm, |
| "Discarding overwritten w/a for reg %04x (clear: %08x, set: %08x)\n", |
| i915_mmio_reg_offset(wa_->reg), |
| wa_->clr, wa_->set); |
| |
| wa_->set &= ~wa->clr; |
| } |
| |
| wal->wa_count++; |
| wa_->set |= wa->set; |
| wa_->clr |= wa->clr; |
| wa_->read |= wa->read; |
| return; |
| } |
| } |
| |
| wal->wa_count++; |
| wa_ = &wal->list[wal->count++]; |
| *wa_ = *wa; |
| |
| while (wa_-- > wal->list) { |
| GEM_BUG_ON(i915_mmio_reg_offset(wa_[0].reg) == |
| i915_mmio_reg_offset(wa_[1].reg)); |
| if (i915_mmio_reg_offset(wa_[1].reg) > |
| i915_mmio_reg_offset(wa_[0].reg)) |
| break; |
| |
| swap(wa_[1], wa_[0]); |
| } |
| } |
| |
| static void wa_add(struct i915_wa_list *wal, i915_reg_t reg, |
| u32 clear, u32 set, u32 read_mask, bool masked_reg) |
| { |
| struct i915_wa wa = { |
| .reg = reg, |
| .clr = clear, |
| .set = set, |
| .read = read_mask, |
| .masked_reg = masked_reg, |
| }; |
| |
| _wa_add(wal, &wa); |
| } |
| |
| static void wa_mcr_add(struct i915_wa_list *wal, i915_mcr_reg_t reg, |
| u32 clear, u32 set, u32 read_mask, bool masked_reg) |
| { |
| struct i915_wa wa = { |
| .mcr_reg = reg, |
| .clr = clear, |
| .set = set, |
| .read = read_mask, |
| .masked_reg = masked_reg, |
| .is_mcr = 1, |
| }; |
| |
| _wa_add(wal, &wa); |
| } |
| |
| static void |
| wa_write_clr_set(struct i915_wa_list *wal, i915_reg_t reg, u32 clear, u32 set) |
| { |
| wa_add(wal, reg, clear, set, clear | set, false); |
| } |
| |
| static void |
| wa_mcr_write_clr_set(struct i915_wa_list *wal, i915_mcr_reg_t reg, u32 clear, u32 set) |
| { |
| wa_mcr_add(wal, reg, clear, set, clear | set, false); |
| } |
| |
| static void |
| wa_write(struct i915_wa_list *wal, i915_reg_t reg, u32 set) |
| { |
| wa_write_clr_set(wal, reg, ~0, set); |
| } |
| |
| static void |
| wa_mcr_write(struct i915_wa_list *wal, i915_mcr_reg_t reg, u32 set) |
| { |
| wa_mcr_write_clr_set(wal, reg, ~0, set); |
| } |
| |
| static void |
| wa_write_or(struct i915_wa_list *wal, i915_reg_t reg, u32 set) |
| { |
| wa_write_clr_set(wal, reg, set, set); |
| } |
| |
| static void |
| wa_mcr_write_or(struct i915_wa_list *wal, i915_mcr_reg_t reg, u32 set) |
| { |
| wa_mcr_write_clr_set(wal, reg, set, set); |
| } |
| |
| static void |
| wa_write_clr(struct i915_wa_list *wal, i915_reg_t reg, u32 clr) |
| { |
| wa_write_clr_set(wal, reg, clr, 0); |
| } |
| |
| static void |
| wa_mcr_write_clr(struct i915_wa_list *wal, i915_mcr_reg_t reg, u32 clr) |
| { |
| wa_mcr_write_clr_set(wal, reg, clr, 0); |
| } |
| |
| /* |
| * WA operations on "masked register". A masked register has the upper 16 bits |
| * documented as "masked" in b-spec. Its purpose is to allow writing to just a |
| * portion of the register without a rmw: you simply write in the upper 16 bits |
| * the mask of bits you are going to modify. |
| * |
| * The wa_masked_* family of functions already does the necessary operations to |
| * calculate the mask based on the parameters passed, so user only has to |
| * provide the lower 16 bits of that register. |
| */ |
| |
| static void |
| wa_masked_en(struct i915_wa_list *wal, i915_reg_t reg, u32 val) |
| { |
| wa_add(wal, reg, 0, _MASKED_BIT_ENABLE(val), val, true); |
| } |
| |
| static void |
| wa_mcr_masked_en(struct i915_wa_list *wal, i915_mcr_reg_t reg, u32 val) |
| { |
| wa_mcr_add(wal, reg, 0, _MASKED_BIT_ENABLE(val), val, true); |
| } |
| |
| static void |
| wa_masked_dis(struct i915_wa_list *wal, i915_reg_t reg, u32 val) |
| { |
| wa_add(wal, reg, 0, _MASKED_BIT_DISABLE(val), val, true); |
| } |
| |
| static void |
| wa_mcr_masked_dis(struct i915_wa_list *wal, i915_mcr_reg_t reg, u32 val) |
| { |
| wa_mcr_add(wal, reg, 0, _MASKED_BIT_DISABLE(val), val, true); |
| } |
| |
| static void |
| wa_masked_field_set(struct i915_wa_list *wal, i915_reg_t reg, |
| u32 mask, u32 val) |
| { |
| wa_add(wal, reg, 0, _MASKED_FIELD(mask, val), mask, true); |
| } |
| |
| static void |
| wa_mcr_masked_field_set(struct i915_wa_list *wal, i915_mcr_reg_t reg, |
| u32 mask, u32 val) |
| { |
| wa_mcr_add(wal, reg, 0, _MASKED_FIELD(mask, val), mask, true); |
| } |
| |
| static void gen6_ctx_workarounds_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| wa_masked_en(wal, INSTPM, INSTPM_FORCE_ORDERING); |
| } |
| |
| static void gen7_ctx_workarounds_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| wa_masked_en(wal, INSTPM, INSTPM_FORCE_ORDERING); |
| } |
| |
| static void gen8_ctx_workarounds_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| wa_masked_en(wal, INSTPM, INSTPM_FORCE_ORDERING); |
| |
| /* WaDisableAsyncFlipPerfMode:bdw,chv */ |
| wa_masked_en(wal, RING_MI_MODE(RENDER_RING_BASE), ASYNC_FLIP_PERF_DISABLE); |
| |
| /* WaDisablePartialInstShootdown:bdw,chv */ |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN, |
| PARTIAL_INSTRUCTION_SHOOTDOWN_DISABLE); |
| |
| /* Use Force Non-Coherent whenever executing a 3D context. This is a |
| * workaround for a possible hang in the unlikely event a TLB |
| * invalidation occurs during a PSD flush. |
| */ |
| /* WaForceEnableNonCoherent:bdw,chv */ |
| /* WaHdcDisableFetchWhenMasked:bdw,chv */ |
| wa_masked_en(wal, HDC_CHICKEN0, |
| HDC_DONOT_FETCH_MEM_WHEN_MASKED | |
| HDC_FORCE_NON_COHERENT); |
| |
| /* From the Haswell PRM, Command Reference: Registers, CACHE_MODE_0: |
| * "The Hierarchical Z RAW Stall Optimization allows non-overlapping |
| * polygons in the same 8x4 pixel/sample area to be processed without |
| * stalling waiting for the earlier ones to write to Hierarchical Z |
| * buffer." |
| * |
| * This optimization is off by default for BDW and CHV; turn it on. |
| */ |
| wa_masked_dis(wal, CACHE_MODE_0_GEN7, HIZ_RAW_STALL_OPT_DISABLE); |
| |
| /* Wa4x4STCOptimizationDisable:bdw,chv */ |
| wa_masked_en(wal, CACHE_MODE_1, GEN8_4x4_STC_OPTIMIZATION_DISABLE); |
| |
| /* |
| * BSpec recommends 8x4 when MSAA is used, |
| * however in practice 16x4 seems fastest. |
| * |
| * Note that PS/WM thread counts depend on the WIZ hashing |
| * disable bit, which we don't touch here, but it's good |
| * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM). |
| */ |
| wa_masked_field_set(wal, GEN7_GT_MODE, |
| GEN6_WIZ_HASHING_MASK, |
| GEN6_WIZ_HASHING_16x4); |
| } |
| |
| static void bdw_ctx_workarounds_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| struct drm_i915_private *i915 = engine->i915; |
| |
| gen8_ctx_workarounds_init(engine, wal); |
| |
| /* WaDisableThreadStallDopClockGating:bdw (pre-production) */ |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN, STALL_DOP_GATING_DISABLE); |
| |
| /* WaDisableDopClockGating:bdw |
| * |
| * Also see the related UCGTCL1 write in bdw_init_clock_gating() |
| * to disable EUTC clock gating. |
| */ |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN2, |
| DOP_CLOCK_GATING_DISABLE); |
| |
| wa_mcr_masked_en(wal, GEN8_HALF_SLICE_CHICKEN3, |
| GEN8_SAMPLER_POWER_BYPASS_DIS); |
| |
| wa_masked_en(wal, HDC_CHICKEN0, |
| /* WaForceContextSaveRestoreNonCoherent:bdw */ |
| HDC_FORCE_CONTEXT_SAVE_RESTORE_NON_COHERENT | |
| /* WaDisableFenceDestinationToSLM:bdw (pre-prod) */ |
| (IS_BROADWELL_GT3(i915) ? HDC_FENCE_DEST_SLM_DISABLE : 0)); |
| } |
| |
| static void chv_ctx_workarounds_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| gen8_ctx_workarounds_init(engine, wal); |
| |
| /* WaDisableThreadStallDopClockGating:chv */ |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN, STALL_DOP_GATING_DISABLE); |
| |
| /* Improve HiZ throughput on CHV. */ |
| wa_masked_en(wal, HIZ_CHICKEN, CHV_HZ_8X8_MODE_IN_1X); |
| } |
| |
| static void gen9_ctx_workarounds_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| struct drm_i915_private *i915 = engine->i915; |
| |
| if (HAS_LLC(i915)) { |
| /* WaCompressedResourceSamplerPbeMediaNewHashMode:skl,kbl |
| * |
| * Must match Display Engine. See |
| * WaCompressedResourceDisplayNewHashMode. |
| */ |
| wa_masked_en(wal, COMMON_SLICE_CHICKEN2, |
| GEN9_PBE_COMPRESSED_HASH_SELECTION); |
| wa_mcr_masked_en(wal, GEN9_HALF_SLICE_CHICKEN7, |
| GEN9_SAMPLER_HASH_COMPRESSED_READ_ADDR); |
| } |
| |
| /* WaClearFlowControlGpgpuContextSave:skl,bxt,kbl,glk,cfl */ |
| /* WaDisablePartialInstShootdown:skl,bxt,kbl,glk,cfl */ |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN, |
| FLOW_CONTROL_ENABLE | |
| PARTIAL_INSTRUCTION_SHOOTDOWN_DISABLE); |
| |
| /* WaEnableYV12BugFixInHalfSliceChicken7:skl,bxt,kbl,glk,cfl */ |
| /* WaEnableSamplerGPGPUPreemptionSupport:skl,bxt,kbl,cfl */ |
| wa_mcr_masked_en(wal, GEN9_HALF_SLICE_CHICKEN7, |
| GEN9_ENABLE_YV12_BUGFIX | |
| GEN9_ENABLE_GPGPU_PREEMPTION); |
| |
| /* Wa4x4STCOptimizationDisable:skl,bxt,kbl,glk,cfl */ |
| /* WaDisablePartialResolveInVc:skl,bxt,kbl,cfl */ |
| wa_masked_en(wal, CACHE_MODE_1, |
| GEN8_4x4_STC_OPTIMIZATION_DISABLE | |
| GEN9_PARTIAL_RESOLVE_IN_VC_DISABLE); |
| |
| /* WaCcsTlbPrefetchDisable:skl,bxt,kbl,glk,cfl */ |
| wa_mcr_masked_dis(wal, GEN9_HALF_SLICE_CHICKEN5, |
| GEN9_CCS_TLB_PREFETCH_ENABLE); |
| |
| /* WaForceContextSaveRestoreNonCoherent:skl,bxt,kbl,cfl */ |
| wa_masked_en(wal, HDC_CHICKEN0, |
| HDC_FORCE_CONTEXT_SAVE_RESTORE_NON_COHERENT | |
| HDC_FORCE_CSR_NON_COHERENT_OVR_DISABLE); |
| |
| /* WaForceEnableNonCoherent and WaDisableHDCInvalidation are |
| * both tied to WaForceContextSaveRestoreNonCoherent |
| * in some hsds for skl. We keep the tie for all gen9. The |
| * documentation is a bit hazy and so we want to get common behaviour, |
| * even though there is no clear evidence we would need both on kbl/bxt. |
| * This area has been source of system hangs so we play it safe |
| * and mimic the skl regardless of what bspec says. |
| * |
| * Use Force Non-Coherent whenever executing a 3D context. This |
| * is a workaround for a possible hang in the unlikely event |
| * a TLB invalidation occurs during a PSD flush. |
| */ |
| |
| /* WaForceEnableNonCoherent:skl,bxt,kbl,cfl */ |
| wa_masked_en(wal, HDC_CHICKEN0, |
| HDC_FORCE_NON_COHERENT); |
| |
| /* WaDisableSamplerPowerBypassForSOPingPong:skl,bxt,kbl,cfl */ |
| if (IS_SKYLAKE(i915) || |
| IS_KABYLAKE(i915) || |
| IS_COFFEELAKE(i915) || |
| IS_COMETLAKE(i915)) |
| wa_mcr_masked_en(wal, GEN8_HALF_SLICE_CHICKEN3, |
| GEN8_SAMPLER_POWER_BYPASS_DIS); |
| |
| /* WaDisableSTUnitPowerOptimization:skl,bxt,kbl,glk,cfl */ |
| wa_mcr_masked_en(wal, HALF_SLICE_CHICKEN2, GEN8_ST_PO_DISABLE); |
| |
| /* |
| * Supporting preemption with fine-granularity requires changes in the |
| * batch buffer programming. Since we can't break old userspace, we |
| * need to set our default preemption level to safe value. Userspace is |
| * still able to use more fine-grained preemption levels, since in |
| * WaEnablePreemptionGranularityControlByUMD we're whitelisting the |
| * per-ctx register. As such, WaDisable{3D,GPGPU}MidCmdPreemption are |
| * not real HW workarounds, but merely a way to start using preemption |
| * while maintaining old contract with userspace. |
| */ |
| |
| /* WaDisable3DMidCmdPreemption:skl,bxt,glk,cfl,[cnl] */ |
| wa_masked_dis(wal, GEN8_CS_CHICKEN1, GEN9_PREEMPT_3D_OBJECT_LEVEL); |
| |
| /* WaDisableGPGPUMidCmdPreemption:skl,bxt,blk,cfl,[cnl] */ |
| wa_masked_field_set(wal, GEN8_CS_CHICKEN1, |
| GEN9_PREEMPT_GPGPU_LEVEL_MASK, |
| GEN9_PREEMPT_GPGPU_COMMAND_LEVEL); |
| |
| /* WaClearHIZ_WM_CHICKEN3:bxt,glk */ |
| if (IS_GEN9_LP(i915)) |
| wa_masked_en(wal, GEN9_WM_CHICKEN3, GEN9_FACTOR_IN_CLR_VAL_HIZ); |
| } |
| |
| static void skl_tune_iz_hashing(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| struct intel_gt *gt = engine->gt; |
| u8 vals[3] = { 0, 0, 0 }; |
| unsigned int i; |
| |
| for (i = 0; i < 3; i++) { |
| u8 ss; |
| |
| /* |
| * Only consider slices where one, and only one, subslice has 7 |
| * EUs |
| */ |
| if (!is_power_of_2(gt->info.sseu.subslice_7eu[i])) |
| continue; |
| |
| /* |
| * subslice_7eu[i] != 0 (because of the check above) and |
| * ss_max == 4 (maximum number of subslices possible per slice) |
| * |
| * -> 0 <= ss <= 3; |
| */ |
| ss = ffs(gt->info.sseu.subslice_7eu[i]) - 1; |
| vals[i] = 3 - ss; |
| } |
| |
| if (vals[0] == 0 && vals[1] == 0 && vals[2] == 0) |
| return; |
| |
| /* Tune IZ hashing. See intel_device_info_runtime_init() */ |
| wa_masked_field_set(wal, GEN7_GT_MODE, |
| GEN9_IZ_HASHING_MASK(2) | |
| GEN9_IZ_HASHING_MASK(1) | |
| GEN9_IZ_HASHING_MASK(0), |
| GEN9_IZ_HASHING(2, vals[2]) | |
| GEN9_IZ_HASHING(1, vals[1]) | |
| GEN9_IZ_HASHING(0, vals[0])); |
| } |
| |
| static void skl_ctx_workarounds_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| gen9_ctx_workarounds_init(engine, wal); |
| skl_tune_iz_hashing(engine, wal); |
| } |
| |
| static void bxt_ctx_workarounds_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| gen9_ctx_workarounds_init(engine, wal); |
| |
| /* WaDisableThreadStallDopClockGating:bxt */ |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN, |
| STALL_DOP_GATING_DISABLE); |
| |
| /* WaToEnableHwFixForPushConstHWBug:bxt */ |
| wa_masked_en(wal, COMMON_SLICE_CHICKEN2, |
| GEN8_SBE_DISABLE_REPLAY_BUF_OPTIMIZATION); |
| } |
| |
| static void kbl_ctx_workarounds_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| struct drm_i915_private *i915 = engine->i915; |
| |
| gen9_ctx_workarounds_init(engine, wal); |
| |
| /* WaToEnableHwFixForPushConstHWBug:kbl */ |
| if (IS_KABYLAKE(i915) && IS_GRAPHICS_STEP(i915, STEP_C0, STEP_FOREVER)) |
| wa_masked_en(wal, COMMON_SLICE_CHICKEN2, |
| GEN8_SBE_DISABLE_REPLAY_BUF_OPTIMIZATION); |
| |
| /* WaDisableSbeCacheDispatchPortSharing:kbl */ |
| wa_mcr_masked_en(wal, GEN8_HALF_SLICE_CHICKEN1, |
| GEN7_SBE_SS_CACHE_DISPATCH_PORT_SHARING_DISABLE); |
| } |
| |
| static void glk_ctx_workarounds_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| gen9_ctx_workarounds_init(engine, wal); |
| |
| /* WaToEnableHwFixForPushConstHWBug:glk */ |
| wa_masked_en(wal, COMMON_SLICE_CHICKEN2, |
| GEN8_SBE_DISABLE_REPLAY_BUF_OPTIMIZATION); |
| } |
| |
| static void cfl_ctx_workarounds_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| gen9_ctx_workarounds_init(engine, wal); |
| |
| /* WaToEnableHwFixForPushConstHWBug:cfl */ |
| wa_masked_en(wal, COMMON_SLICE_CHICKEN2, |
| GEN8_SBE_DISABLE_REPLAY_BUF_OPTIMIZATION); |
| |
| /* WaDisableSbeCacheDispatchPortSharing:cfl */ |
| wa_mcr_masked_en(wal, GEN8_HALF_SLICE_CHICKEN1, |
| GEN7_SBE_SS_CACHE_DISPATCH_PORT_SHARING_DISABLE); |
| } |
| |
| static void icl_ctx_workarounds_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| /* Wa_1406697149 (WaDisableBankHangMode:icl) */ |
| wa_write(wal, GEN8_L3CNTLREG, GEN8_ERRDETBCTRL); |
| |
| /* WaForceEnableNonCoherent:icl |
| * This is not the same workaround as in early Gen9 platforms, where |
| * lacking this could cause system hangs, but coherency performance |
| * overhead is high and only a few compute workloads really need it |
| * (the register is whitelisted in hardware now, so UMDs can opt in |
| * for coherency if they have a good reason). |
| */ |
| wa_mcr_masked_en(wal, ICL_HDC_MODE, HDC_FORCE_NON_COHERENT); |
| |
| /* WaEnableFloatBlendOptimization:icl */ |
| wa_mcr_add(wal, GEN10_CACHE_MODE_SS, 0, |
| _MASKED_BIT_ENABLE(FLOAT_BLEND_OPTIMIZATION_ENABLE), |
| 0 /* write-only, so skip validation */, |
| true); |
| |
| /* WaDisableGPGPUMidThreadPreemption:icl */ |
| wa_masked_field_set(wal, GEN8_CS_CHICKEN1, |
| GEN9_PREEMPT_GPGPU_LEVEL_MASK, |
| GEN9_PREEMPT_GPGPU_THREAD_GROUP_LEVEL); |
| |
| /* allow headerless messages for preemptible GPGPU context */ |
| wa_mcr_masked_en(wal, GEN10_SAMPLER_MODE, |
| GEN11_SAMPLER_ENABLE_HEADLESS_MSG); |
| |
| /* Wa_1604278689:icl,ehl */ |
| wa_write(wal, IVB_FBC_RT_BASE, 0xFFFFFFFF & ~ILK_FBC_RT_VALID); |
| wa_write_clr_set(wal, IVB_FBC_RT_BASE_UPPER, |
| 0, |
| 0xFFFFFFFF); |
| |
| /* Wa_1406306137:icl,ehl */ |
| wa_mcr_masked_en(wal, GEN9_ROW_CHICKEN4, GEN11_DIS_PICK_2ND_EU); |
| } |
| |
| /* |
| * These settings aren't actually workarounds, but general tuning settings that |
| * need to be programmed on dg2 platform. |
| */ |
| static void dg2_ctx_gt_tuning_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| wa_mcr_masked_en(wal, CHICKEN_RASTER_2, TBIMR_FAST_CLIP); |
| wa_mcr_write_clr_set(wal, XEHP_L3SQCREG5, L3_PWM_TIMER_INIT_VAL_MASK, |
| REG_FIELD_PREP(L3_PWM_TIMER_INIT_VAL_MASK, 0x7f)); |
| wa_mcr_write_clr_set(wal, XEHP_FF_MODE2, FF_MODE2_TDS_TIMER_MASK, |
| FF_MODE2_TDS_TIMER_128); |
| } |
| |
| static void gen12_ctx_workarounds_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| struct drm_i915_private *i915 = engine->i915; |
| |
| /* |
| * Wa_1409142259:tgl,dg1,adl-p |
| * Wa_1409347922:tgl,dg1,adl-p |
| * Wa_1409252684:tgl,dg1,adl-p |
| * Wa_1409217633:tgl,dg1,adl-p |
| * Wa_1409207793:tgl,dg1,adl-p |
| * Wa_1409178076:tgl,dg1,adl-p |
| * Wa_1408979724:tgl,dg1,adl-p |
| * Wa_14010443199:tgl,rkl,dg1,adl-p |
| * Wa_14010698770:tgl,rkl,dg1,adl-s,adl-p |
| * Wa_1409342910:tgl,rkl,dg1,adl-s,adl-p |
| */ |
| wa_masked_en(wal, GEN11_COMMON_SLICE_CHICKEN3, |
| GEN12_DISABLE_CPS_AWARE_COLOR_PIPE); |
| |
| /* WaDisableGPGPUMidThreadPreemption:gen12 */ |
| wa_masked_field_set(wal, GEN8_CS_CHICKEN1, |
| GEN9_PREEMPT_GPGPU_LEVEL_MASK, |
| GEN9_PREEMPT_GPGPU_THREAD_GROUP_LEVEL); |
| |
| /* |
| * Wa_16011163337 - GS_TIMER |
| * |
| * TDS_TIMER: Although some platforms refer to it as Wa_1604555607, we |
| * need to program it even on those that don't explicitly list that |
| * workaround. |
| * |
| * Note that the programming of GEN12_FF_MODE2 is further modified |
| * according to the FF_MODE2 guidance given by Wa_1608008084. |
| * Wa_1608008084 tells us the FF_MODE2 register will return the wrong |
| * value when read from the CPU. |
| * |
| * The default value for this register is zero for all fields. |
| * So instead of doing a RMW we should just write the desired values |
| * for TDS and GS timers. Note that since the readback can't be trusted, |
| * the clear mask is just set to ~0 to make sure other bits are not |
| * inadvertently set. For the same reason read verification is ignored. |
| */ |
| wa_add(wal, |
| GEN12_FF_MODE2, |
| ~0, |
| FF_MODE2_TDS_TIMER_128 | FF_MODE2_GS_TIMER_224, |
| 0, false); |
| |
| if (!IS_DG1(i915)) { |
| /* Wa_1806527549 */ |
| wa_masked_en(wal, HIZ_CHICKEN, HZ_DEPTH_TEST_LE_GE_OPT_DISABLE); |
| |
| /* Wa_1606376872 */ |
| wa_masked_en(wal, COMMON_SLICE_CHICKEN4, DISABLE_TDC_LOAD_BALANCING_CALC); |
| } |
| } |
| |
| static void dg1_ctx_workarounds_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| gen12_ctx_workarounds_init(engine, wal); |
| |
| /* Wa_1409044764 */ |
| wa_masked_dis(wal, GEN11_COMMON_SLICE_CHICKEN3, |
| DG1_FLOAT_POINT_BLEND_OPT_STRICT_MODE_EN); |
| |
| /* Wa_22010493298 */ |
| wa_masked_en(wal, HIZ_CHICKEN, |
| DG1_HZ_READ_SUPPRESSION_OPTIMIZATION_DISABLE); |
| } |
| |
| static void dg2_ctx_workarounds_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| dg2_ctx_gt_tuning_init(engine, wal); |
| |
| /* Wa_16013271637:dg2 */ |
| wa_mcr_masked_en(wal, XEHP_SLICE_COMMON_ECO_CHICKEN1, |
| MSC_MSAA_REODER_BUF_BYPASS_DISABLE); |
| |
| /* Wa_14014947963:dg2 */ |
| wa_masked_field_set(wal, VF_PREEMPTION, PREEMPTION_VERTEX_COUNT, 0x4000); |
| |
| /* Wa_18018764978:dg2 */ |
| wa_mcr_masked_en(wal, XEHP_PSS_MODE2, SCOREBOARD_STALL_FLUSH_CONTROL); |
| |
| /* Wa_18019271663:dg2 */ |
| wa_masked_en(wal, CACHE_MODE_1, MSAA_OPTIMIZATION_REDUC_DISABLE); |
| |
| /* Wa_14019877138:dg2 */ |
| wa_mcr_masked_en(wal, XEHP_PSS_CHICKEN, FD_END_COLLECT); |
| } |
| |
| static void xelpg_ctx_gt_tuning_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| struct intel_gt *gt = engine->gt; |
| |
| dg2_ctx_gt_tuning_init(engine, wal); |
| |
| /* |
| * Due to Wa_16014892111, the DRAW_WATERMARK tuning must be done in |
| * gen12_emit_indirect_ctx_rcs() rather than here on some early |
| * steppings. |
| */ |
| if (!(IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0))) |
| wa_add(wal, DRAW_WATERMARK, VERT_WM_VAL, 0x3FF, 0, false); |
| } |
| |
| static void xelpg_ctx_workarounds_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| struct intel_gt *gt = engine->gt; |
| |
| xelpg_ctx_gt_tuning_init(engine, wal); |
| |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0)) { |
| /* Wa_14014947963 */ |
| wa_masked_field_set(wal, VF_PREEMPTION, |
| PREEMPTION_VERTEX_COUNT, 0x4000); |
| |
| /* Wa_16013271637 */ |
| wa_mcr_masked_en(wal, XEHP_SLICE_COMMON_ECO_CHICKEN1, |
| MSC_MSAA_REODER_BUF_BYPASS_DISABLE); |
| |
| /* Wa_18019627453 */ |
| wa_mcr_masked_en(wal, VFLSKPD, VF_PREFETCH_TLB_DIS); |
| |
| /* Wa_18018764978 */ |
| wa_mcr_masked_en(wal, XEHP_PSS_MODE2, SCOREBOARD_STALL_FLUSH_CONTROL); |
| } |
| |
| /* Wa_18019271663 */ |
| wa_masked_en(wal, CACHE_MODE_1, MSAA_OPTIMIZATION_REDUC_DISABLE); |
| |
| /* Wa_14019877138 */ |
| wa_mcr_masked_en(wal, XEHP_PSS_CHICKEN, FD_END_COLLECT); |
| } |
| |
| static void fakewa_disable_nestedbb_mode(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| /* |
| * This is a "fake" workaround defined by software to ensure we |
| * maintain reliable, backward-compatible behavior for userspace with |
| * regards to how nested MI_BATCH_BUFFER_START commands are handled. |
| * |
| * The per-context setting of MI_MODE[12] determines whether the bits |
| * of a nested MI_BATCH_BUFFER_START instruction should be interpreted |
| * in the traditional manner or whether they should instead use a new |
| * tgl+ meaning that breaks backward compatibility, but allows nesting |
| * into 3rd-level batchbuffers. When this new capability was first |
| * added in TGL, it remained off by default unless a context |
| * intentionally opted in to the new behavior. However Xe_HPG now |
| * flips this on by default and requires that we explicitly opt out if |
| * we don't want the new behavior. |
| * |
| * From a SW perspective, we want to maintain the backward-compatible |
| * behavior for userspace, so we'll apply a fake workaround to set it |
| * back to the legacy behavior on platforms where the hardware default |
| * is to break compatibility. At the moment there is no Linux |
| * userspace that utilizes third-level batchbuffers, so this will avoid |
| * userspace from needing to make any changes. using the legacy |
| * meaning is the correct thing to do. If/when we have userspace |
| * consumers that want to utilize third-level batch nesting, we can |
| * provide a context parameter to allow them to opt-in. |
| */ |
| wa_masked_dis(wal, RING_MI_MODE(engine->mmio_base), TGL_NESTED_BB_EN); |
| } |
| |
| static void gen12_ctx_gt_mocs_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| u8 mocs; |
| |
| /* |
| * Some blitter commands do not have a field for MOCS, those |
| * commands will use MOCS index pointed by BLIT_CCTL. |
| * BLIT_CCTL registers are needed to be programmed to un-cached. |
| */ |
| if (engine->class == COPY_ENGINE_CLASS) { |
| mocs = engine->gt->mocs.uc_index; |
| wa_write_clr_set(wal, |
| BLIT_CCTL(engine->mmio_base), |
| BLIT_CCTL_MASK, |
| BLIT_CCTL_MOCS(mocs, mocs)); |
| } |
| } |
| |
| /* |
| * gen12_ctx_gt_fake_wa_init() aren't programmingan official workaround |
| * defined by the hardware team, but it programming general context registers. |
| * Adding those context register programming in context workaround |
| * allow us to use the wa framework for proper application and validation. |
| */ |
| static void |
| gen12_ctx_gt_fake_wa_init(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal) |
| { |
| if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 55)) |
| fakewa_disable_nestedbb_mode(engine, wal); |
| |
| gen12_ctx_gt_mocs_init(engine, wal); |
| } |
| |
| static void |
| __intel_engine_init_ctx_wa(struct intel_engine_cs *engine, |
| struct i915_wa_list *wal, |
| const char *name) |
| { |
| struct drm_i915_private *i915 = engine->i915; |
| |
| wa_init_start(wal, engine->gt, name, engine->name); |
| |
| /* Applies to all engines */ |
| /* |
| * Fake workarounds are not the actual workaround but |
| * programming of context registers using workaround framework. |
| */ |
| if (GRAPHICS_VER(i915) >= 12) |
| gen12_ctx_gt_fake_wa_init(engine, wal); |
| |
| if (engine->class != RENDER_CLASS) |
| goto done; |
| |
| if (IS_GFX_GT_IP_RANGE(engine->gt, IP_VER(12, 70), IP_VER(12, 74))) |
| xelpg_ctx_workarounds_init(engine, wal); |
| else if (IS_PONTEVECCHIO(i915)) |
| ; /* noop; none at this time */ |
| else if (IS_DG2(i915)) |
| dg2_ctx_workarounds_init(engine, wal); |
| else if (IS_XEHPSDV(i915)) |
| ; /* noop; none at this time */ |
| else if (IS_DG1(i915)) |
| dg1_ctx_workarounds_init(engine, wal); |
| else if (GRAPHICS_VER(i915) == 12) |
| gen12_ctx_workarounds_init(engine, wal); |
| else if (GRAPHICS_VER(i915) == 11) |
| icl_ctx_workarounds_init(engine, wal); |
| else if (IS_COFFEELAKE(i915) || IS_COMETLAKE(i915)) |
| cfl_ctx_workarounds_init(engine, wal); |
| else if (IS_GEMINILAKE(i915)) |
| glk_ctx_workarounds_init(engine, wal); |
| else if (IS_KABYLAKE(i915)) |
| kbl_ctx_workarounds_init(engine, wal); |
| else if (IS_BROXTON(i915)) |
| bxt_ctx_workarounds_init(engine, wal); |
| else if (IS_SKYLAKE(i915)) |
| skl_ctx_workarounds_init(engine, wal); |
| else if (IS_CHERRYVIEW(i915)) |
| chv_ctx_workarounds_init(engine, wal); |
| else if (IS_BROADWELL(i915)) |
| bdw_ctx_workarounds_init(engine, wal); |
| else if (GRAPHICS_VER(i915) == 7) |
| gen7_ctx_workarounds_init(engine, wal); |
| else if (GRAPHICS_VER(i915) == 6) |
| gen6_ctx_workarounds_init(engine, wal); |
| else if (GRAPHICS_VER(i915) < 8) |
| ; |
| else |
| MISSING_CASE(GRAPHICS_VER(i915)); |
| |
| done: |
| wa_init_finish(wal); |
| } |
| |
| void intel_engine_init_ctx_wa(struct intel_engine_cs *engine) |
| { |
| __intel_engine_init_ctx_wa(engine, &engine->ctx_wa_list, "context"); |
| } |
| |
| int intel_engine_emit_ctx_wa(struct i915_request *rq) |
| { |
| struct i915_wa_list *wal = &rq->engine->ctx_wa_list; |
| struct intel_uncore *uncore = rq->engine->uncore; |
| enum forcewake_domains fw; |
| unsigned long flags; |
| struct i915_wa *wa; |
| unsigned int i; |
| u32 *cs; |
| int ret; |
| |
| if (wal->count == 0) |
| return 0; |
| |
| ret = rq->engine->emit_flush(rq, EMIT_BARRIER); |
| if (ret) |
| return ret; |
| |
| cs = intel_ring_begin(rq, (wal->count * 2 + 2)); |
| if (IS_ERR(cs)) |
| return PTR_ERR(cs); |
| |
| fw = wal_get_fw_for_rmw(uncore, wal); |
| |
| intel_gt_mcr_lock(wal->gt, &flags); |
| spin_lock(&uncore->lock); |
| intel_uncore_forcewake_get__locked(uncore, fw); |
| |
| *cs++ = MI_LOAD_REGISTER_IMM(wal->count); |
| for (i = 0, wa = wal->list; i < wal->count; i++, wa++) { |
| u32 val; |
| |
| /* Skip reading the register if it's not really needed */ |
| if (wa->masked_reg || (wa->clr | wa->set) == U32_MAX) { |
| val = wa->set; |
| } else { |
| val = wa->is_mcr ? |
| intel_gt_mcr_read_any_fw(wal->gt, wa->mcr_reg) : |
| intel_uncore_read_fw(uncore, wa->reg); |
| val &= ~wa->clr; |
| val |= wa->set; |
| } |
| |
| *cs++ = i915_mmio_reg_offset(wa->reg); |
| *cs++ = val; |
| } |
| *cs++ = MI_NOOP; |
| |
| intel_uncore_forcewake_put__locked(uncore, fw); |
| spin_unlock(&uncore->lock); |
| intel_gt_mcr_unlock(wal->gt, flags); |
| |
| intel_ring_advance(rq, cs); |
| |
| ret = rq->engine->emit_flush(rq, EMIT_BARRIER); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void |
| gen4_gt_workarounds_init(struct intel_gt *gt, |
| struct i915_wa_list *wal) |
| { |
| /* WaDisable_RenderCache_OperationalFlush:gen4,ilk */ |
| wa_masked_dis(wal, CACHE_MODE_0, RC_OP_FLUSH_ENABLE); |
| } |
| |
| static void |
| g4x_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| gen4_gt_workarounds_init(gt, wal); |
| |
| /* WaDisableRenderCachePipelinedFlush:g4x,ilk */ |
| wa_masked_en(wal, CACHE_MODE_0, CM0_PIPELINED_RENDER_FLUSH_DISABLE); |
| } |
| |
| static void |
| ilk_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| g4x_gt_workarounds_init(gt, wal); |
| |
| wa_masked_en(wal, _3D_CHICKEN2, _3D_CHICKEN2_WM_READ_PIPELINED); |
| } |
| |
| static void |
| snb_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| } |
| |
| static void |
| ivb_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| /* Apply the WaDisableRHWOOptimizationForRenderHang:ivb workaround. */ |
| wa_masked_dis(wal, |
| GEN7_COMMON_SLICE_CHICKEN1, |
| GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC); |
| |
| /* WaApplyL3ControlAndL3ChickenMode:ivb */ |
| wa_write(wal, GEN7_L3CNTLREG1, GEN7_WA_FOR_GEN7_L3_CONTROL); |
| wa_write(wal, GEN7_L3_CHICKEN_MODE_REGISTER, GEN7_WA_L3_CHICKEN_MODE); |
| |
| /* WaForceL3Serialization:ivb */ |
| wa_write_clr(wal, GEN7_L3SQCREG4, L3SQ_URB_READ_CAM_MATCH_DISABLE); |
| } |
| |
| static void |
| vlv_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| /* WaForceL3Serialization:vlv */ |
| wa_write_clr(wal, GEN7_L3SQCREG4, L3SQ_URB_READ_CAM_MATCH_DISABLE); |
| |
| /* |
| * WaIncreaseL3CreditsForVLVB0:vlv |
| * This is the hardware default actually. |
| */ |
| wa_write(wal, GEN7_L3SQCREG1, VLV_B0_WA_L3SQCREG1_VALUE); |
| } |
| |
| static void |
| hsw_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| /* L3 caching of data atomics doesn't work -- disable it. */ |
| wa_write(wal, HSW_SCRATCH1, HSW_SCRATCH1_L3_DATA_ATOMICS_DISABLE); |
| |
| wa_add(wal, |
| HSW_ROW_CHICKEN3, 0, |
| _MASKED_BIT_ENABLE(HSW_ROW_CHICKEN3_L3_GLOBAL_ATOMICS_DISABLE), |
| 0 /* XXX does this reg exist? */, true); |
| |
| /* WaVSRefCountFullforceMissDisable:hsw */ |
| wa_write_clr(wal, GEN7_FF_THREAD_MODE, GEN7_FF_VS_REF_CNT_FFME); |
| } |
| |
| static void |
| gen9_wa_init_mcr(struct drm_i915_private *i915, struct i915_wa_list *wal) |
| { |
| const struct sseu_dev_info *sseu = &to_gt(i915)->info.sseu; |
| unsigned int slice, subslice; |
| u32 mcr, mcr_mask; |
| |
| GEM_BUG_ON(GRAPHICS_VER(i915) != 9); |
| |
| /* |
| * WaProgramMgsrForCorrectSliceSpecificMmioReads:gen9,glk,kbl,cml |
| * Before any MMIO read into slice/subslice specific registers, MCR |
| * packet control register needs to be programmed to point to any |
| * enabled s/ss pair. Otherwise, incorrect values will be returned. |
| * This means each subsequent MMIO read will be forwarded to an |
| * specific s/ss combination, but this is OK since these registers |
| * are consistent across s/ss in almost all cases. In the rare |
| * occasions, such as INSTDONE, where this value is dependent |
| * on s/ss combo, the read should be done with read_subslice_reg. |
| */ |
| slice = ffs(sseu->slice_mask) - 1; |
| GEM_BUG_ON(slice >= ARRAY_SIZE(sseu->subslice_mask.hsw)); |
| subslice = ffs(intel_sseu_get_hsw_subslices(sseu, slice)); |
| GEM_BUG_ON(!subslice); |
| subslice--; |
| |
| /* |
| * We use GEN8_MCR..() macros to calculate the |mcr| value for |
| * Gen9 to address WaProgramMgsrForCorrectSliceSpecificMmioReads |
| */ |
| mcr = GEN8_MCR_SLICE(slice) | GEN8_MCR_SUBSLICE(subslice); |
| mcr_mask = GEN8_MCR_SLICE_MASK | GEN8_MCR_SUBSLICE_MASK; |
| |
| drm_dbg(&i915->drm, "MCR slice:%d/subslice:%d = %x\n", slice, subslice, mcr); |
| |
| wa_write_clr_set(wal, GEN8_MCR_SELECTOR, mcr_mask, mcr); |
| } |
| |
| static void |
| gen9_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| struct drm_i915_private *i915 = gt->i915; |
| |
| /* WaProgramMgsrForCorrectSliceSpecificMmioReads:glk,kbl,cml,gen9 */ |
| gen9_wa_init_mcr(i915, wal); |
| |
| /* WaDisableKillLogic:bxt,skl,kbl */ |
| if (!IS_COFFEELAKE(i915) && !IS_COMETLAKE(i915)) |
| wa_write_or(wal, |
| GAM_ECOCHK, |
| ECOCHK_DIS_TLB); |
| |
| if (HAS_LLC(i915)) { |
| /* WaCompressedResourceSamplerPbeMediaNewHashMode:skl,kbl |
| * |
| * Must match Display Engine. See |
| * WaCompressedResourceDisplayNewHashMode. |
| */ |
| wa_write_or(wal, |
| MMCD_MISC_CTRL, |
| MMCD_PCLA | MMCD_HOTSPOT_EN); |
| } |
| |
| /* WaDisableHDCInvalidation:skl,bxt,kbl,cfl */ |
| wa_write_or(wal, |
| GAM_ECOCHK, |
| BDW_DISABLE_HDC_INVALIDATION); |
| } |
| |
| static void |
| skl_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| gen9_gt_workarounds_init(gt, wal); |
| |
| /* WaDisableGafsUnitClkGating:skl */ |
| wa_write_or(wal, |
| GEN7_UCGCTL4, |
| GEN8_EU_GAUNIT_CLOCK_GATE_DISABLE); |
| |
| /* WaInPlaceDecompressionHang:skl */ |
| if (IS_SKYLAKE(gt->i915) && IS_GRAPHICS_STEP(gt->i915, STEP_A0, STEP_H0)) |
| wa_write_or(wal, |
| GEN9_GAMT_ECO_REG_RW_IA, |
| GAMT_ECO_ENABLE_IN_PLACE_DECOMPRESS); |
| } |
| |
| static void |
| kbl_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| gen9_gt_workarounds_init(gt, wal); |
| |
| /* WaDisableDynamicCreditSharing:kbl */ |
| if (IS_KABYLAKE(gt->i915) && IS_GRAPHICS_STEP(gt->i915, 0, STEP_C0)) |
| wa_write_or(wal, |
| GAMT_CHKN_BIT_REG, |
| GAMT_CHKN_DISABLE_DYNAMIC_CREDIT_SHARING); |
| |
| /* WaDisableGafsUnitClkGating:kbl */ |
| wa_write_or(wal, |
| GEN7_UCGCTL4, |
| GEN8_EU_GAUNIT_CLOCK_GATE_DISABLE); |
| |
| /* WaInPlaceDecompressionHang:kbl */ |
| wa_write_or(wal, |
| GEN9_GAMT_ECO_REG_RW_IA, |
| GAMT_ECO_ENABLE_IN_PLACE_DECOMPRESS); |
| } |
| |
| static void |
| glk_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| gen9_gt_workarounds_init(gt, wal); |
| } |
| |
| static void |
| cfl_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| gen9_gt_workarounds_init(gt, wal); |
| |
| /* WaDisableGafsUnitClkGating:cfl */ |
| wa_write_or(wal, |
| GEN7_UCGCTL4, |
| GEN8_EU_GAUNIT_CLOCK_GATE_DISABLE); |
| |
| /* WaInPlaceDecompressionHang:cfl */ |
| wa_write_or(wal, |
| GEN9_GAMT_ECO_REG_RW_IA, |
| GAMT_ECO_ENABLE_IN_PLACE_DECOMPRESS); |
| } |
| |
| static void __set_mcr_steering(struct i915_wa_list *wal, |
| i915_reg_t steering_reg, |
| unsigned int slice, unsigned int subslice) |
| { |
| u32 mcr, mcr_mask; |
| |
| mcr = GEN11_MCR_SLICE(slice) | GEN11_MCR_SUBSLICE(subslice); |
| mcr_mask = GEN11_MCR_SLICE_MASK | GEN11_MCR_SUBSLICE_MASK; |
| |
| wa_write_clr_set(wal, steering_reg, mcr_mask, mcr); |
| } |
| |
| static void debug_dump_steering(struct intel_gt *gt) |
| { |
| struct drm_printer p = drm_dbg_printer(>->i915->drm, DRM_UT_DRIVER, |
| "MCR Steering:"); |
| |
| if (drm_debug_enabled(DRM_UT_DRIVER)) |
| intel_gt_mcr_report_steering(&p, gt, false); |
| } |
| |
| static void __add_mcr_wa(struct intel_gt *gt, struct i915_wa_list *wal, |
| unsigned int slice, unsigned int subslice) |
| { |
| __set_mcr_steering(wal, GEN8_MCR_SELECTOR, slice, subslice); |
| |
| gt->default_steering.groupid = slice; |
| gt->default_steering.instanceid = subslice; |
| |
| debug_dump_steering(gt); |
| } |
| |
| static void |
| icl_wa_init_mcr(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| const struct sseu_dev_info *sseu = >->info.sseu; |
| unsigned int subslice; |
| |
| GEM_BUG_ON(GRAPHICS_VER(gt->i915) < 11); |
| GEM_BUG_ON(hweight8(sseu->slice_mask) > 1); |
| |
| /* |
| * Although a platform may have subslices, we need to always steer |
| * reads to the lowest instance that isn't fused off. When Render |
| * Power Gating is enabled, grabbing forcewake will only power up a |
| * single subslice (the "minconfig") if there isn't a real workload |
| * that needs to be run; this means that if we steer register reads to |
| * one of the higher subslices, we run the risk of reading back 0's or |
| * random garbage. |
| */ |
| subslice = __ffs(intel_sseu_get_hsw_subslices(sseu, 0)); |
| |
| /* |
| * If the subslice we picked above also steers us to a valid L3 bank, |
| * then we can just rely on the default steering and won't need to |
| * worry about explicitly re-steering L3BANK reads later. |
| */ |
| if (gt->info.l3bank_mask & BIT(subslice)) |
| gt->steering_table[L3BANK] = NULL; |
| |
| __add_mcr_wa(gt, wal, 0, subslice); |
| } |
| |
| static void |
| xehp_init_mcr(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| const struct sseu_dev_info *sseu = >->info.sseu; |
| unsigned long slice, subslice = 0, slice_mask = 0; |
| u32 lncf_mask = 0; |
| int i; |
| |
| /* |
| * On Xe_HP the steering increases in complexity. There are now several |
| * more units that require steering and we're not guaranteed to be able |
| * to find a common setting for all of them. These are: |
| * - GSLICE (fusable) |
| * - DSS (sub-unit within gslice; fusable) |
| * - L3 Bank (fusable) |
| * - MSLICE (fusable) |
| * - LNCF (sub-unit within mslice; always present if mslice is present) |
| * |
| * We'll do our default/implicit steering based on GSLICE (in the |
| * sliceid field) and DSS (in the subsliceid field). If we can |
| * find overlap between the valid MSLICE and/or LNCF values with |
| * a suitable GSLICE, then we can just re-use the default value and |
| * skip and explicit steering at runtime. |
| * |
| * We only need to look for overlap between GSLICE/MSLICE/LNCF to find |
| * a valid sliceid value. DSS steering is the only type of steering |
| * that utilizes the 'subsliceid' bits. |
| * |
| * Also note that, even though the steering domain is called "GSlice" |
| * and it is encoded in the register using the gslice format, the spec |
| * says that the combined (geometry | compute) fuse should be used to |
| * select the steering. |
| */ |
| |
| /* Find the potential gslice candidates */ |
| slice_mask = intel_slicemask_from_xehp_dssmask(sseu->subslice_mask, |
| GEN_DSS_PER_GSLICE); |
| |
| /* |
| * Find the potential LNCF candidates. Either LNCF within a valid |
| * mslice is fine. |
| */ |
| for_each_set_bit(i, >->info.mslice_mask, GEN12_MAX_MSLICES) |
| lncf_mask |= (0x3 << (i * 2)); |
| |
| /* |
| * Are there any sliceid values that work for both GSLICE and LNCF |
| * steering? |
| */ |
| if (slice_mask & lncf_mask) { |
| slice_mask &= lncf_mask; |
| gt->steering_table[LNCF] = NULL; |
| } |
| |
| /* How about sliceid values that also work for MSLICE steering? */ |
| if (slice_mask & gt->info.mslice_mask) { |
| slice_mask &= gt->info.mslice_mask; |
| gt->steering_table[MSLICE] = NULL; |
| } |
| |
| if (IS_XEHPSDV(gt->i915) && slice_mask & BIT(0)) |
| gt->steering_table[GAM] = NULL; |
| |
| slice = __ffs(slice_mask); |
| subslice = intel_sseu_find_first_xehp_dss(sseu, GEN_DSS_PER_GSLICE, slice) % |
| GEN_DSS_PER_GSLICE; |
| |
| __add_mcr_wa(gt, wal, slice, subslice); |
| |
| /* |
| * SQIDI ranges are special because they use different steering |
| * registers than everything else we work with. On XeHP SDV and |
| * DG2-G10, any value in the steering registers will work fine since |
| * all instances are present, but DG2-G11 only has SQIDI instances at |
| * ID's 2 and 3, so we need to steer to one of those. For simplicity |
| * we'll just steer to a hardcoded "2" since that value will work |
| * everywhere. |
| */ |
| __set_mcr_steering(wal, MCFG_MCR_SELECTOR, 0, 2); |
| __set_mcr_steering(wal, SF_MCR_SELECTOR, 0, 2); |
| |
| /* |
| * On DG2, GAM registers have a dedicated steering control register |
| * and must always be programmed to a hardcoded groupid of "1." |
| */ |
| if (IS_DG2(gt->i915)) |
| __set_mcr_steering(wal, GAM_MCR_SELECTOR, 1, 0); |
| } |
| |
| static void |
| pvc_init_mcr(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| unsigned int dss; |
| |
| /* |
| * Setup implicit steering for COMPUTE and DSS ranges to the first |
| * non-fused-off DSS. All other types of MCR registers will be |
| * explicitly steered. |
| */ |
| dss = intel_sseu_find_first_xehp_dss(>->info.sseu, 0, 0); |
| __add_mcr_wa(gt, wal, dss / GEN_DSS_PER_CSLICE, dss % GEN_DSS_PER_CSLICE); |
| } |
| |
| static void |
| icl_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| struct drm_i915_private *i915 = gt->i915; |
| |
| icl_wa_init_mcr(gt, wal); |
| |
| /* WaModifyGamTlbPartitioning:icl */ |
| wa_write_clr_set(wal, |
| GEN11_GACB_PERF_CTRL, |
| GEN11_HASH_CTRL_MASK, |
| GEN11_HASH_CTRL_BIT0 | GEN11_HASH_CTRL_BIT4); |
| |
| /* Wa_1405766107:icl |
| * Formerly known as WaCL2SFHalfMaxAlloc |
| */ |
| wa_write_or(wal, |
| GEN11_LSN_UNSLCVC, |
| GEN11_LSN_UNSLCVC_GAFS_HALF_SF_MAXALLOC | |
| GEN11_LSN_UNSLCVC_GAFS_HALF_CL2_MAXALLOC); |
| |
| /* Wa_220166154:icl |
| * Formerly known as WaDisCtxReload |
| */ |
| wa_write_or(wal, |
| GEN8_GAMW_ECO_DEV_RW_IA, |
| GAMW_ECO_DEV_CTX_RELOAD_DISABLE); |
| |
| /* Wa_1406463099:icl |
| * Formerly known as WaGamTlbPendError |
| */ |
| wa_write_or(wal, |
| GAMT_CHKN_BIT_REG, |
| GAMT_CHKN_DISABLE_L3_COH_PIPE); |
| |
| /* |
| * Wa_1408615072:icl,ehl (vsunit) |
| * Wa_1407596294:icl,ehl (hsunit) |
| */ |
| wa_write_or(wal, UNSLICE_UNIT_LEVEL_CLKGATE, |
| VSUNIT_CLKGATE_DIS | HSUNIT_CLKGATE_DIS); |
| |
| /* Wa_1407352427:icl,ehl */ |
| wa_write_or(wal, UNSLICE_UNIT_LEVEL_CLKGATE2, |
| PSDUNIT_CLKGATE_DIS); |
| |
| /* Wa_1406680159:icl,ehl */ |
| wa_mcr_write_or(wal, |
| GEN11_SUBSLICE_UNIT_LEVEL_CLKGATE, |
| GWUNIT_CLKGATE_DIS); |
| |
| /* Wa_1607087056:icl,ehl,jsl */ |
| if (IS_ICELAKE(i915) || |
| ((IS_JASPERLAKE(i915) || IS_ELKHARTLAKE(i915)) && |
| IS_GRAPHICS_STEP(i915, STEP_A0, STEP_B0))) |
| wa_write_or(wal, |
| GEN11_SLICE_UNIT_LEVEL_CLKGATE, |
| L3_CLKGATE_DIS | L3_CR2X_CLKGATE_DIS); |
| |
| /* |
| * This is not a documented workaround, but rather an optimization |
| * to reduce sampler power. |
| */ |
| wa_mcr_write_clr(wal, GEN10_DFR_RATIO_EN_AND_CHICKEN, DFR_DISABLE); |
| } |
| |
| /* |
| * Though there are per-engine instances of these registers, |
| * they retain their value through engine resets and should |
| * only be provided on the GT workaround list rather than |
| * the engine-specific workaround list. |
| */ |
| static void |
| wa_14011060649(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| struct intel_engine_cs *engine; |
| int id; |
| |
| for_each_engine(engine, gt, id) { |
| if (engine->class != VIDEO_DECODE_CLASS || |
| (engine->instance % 2)) |
| continue; |
| |
| wa_write_or(wal, VDBOX_CGCTL3F10(engine->mmio_base), |
| IECPUNIT_CLKGATE_DIS); |
| } |
| } |
| |
| static void |
| gen12_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| icl_wa_init_mcr(gt, wal); |
| |
| /* Wa_14011060649:tgl,rkl,dg1,adl-s,adl-p */ |
| wa_14011060649(gt, wal); |
| |
| /* Wa_14011059788:tgl,rkl,adl-s,dg1,adl-p */ |
| wa_mcr_write_or(wal, GEN10_DFR_RATIO_EN_AND_CHICKEN, DFR_DISABLE); |
| |
| /* |
| * Wa_14015795083 |
| * |
| * Firmware on some gen12 platforms locks the MISCCPCTL register, |
| * preventing i915 from modifying it for this workaround. Skip the |
| * readback verification for this workaround on debug builds; if the |
| * workaround doesn't stick due to firmware behavior, it's not an error |
| * that we want CI to flag. |
| */ |
| wa_add(wal, GEN7_MISCCPCTL, GEN12_DOP_CLOCK_GATE_RENDER_ENABLE, |
| 0, 0, false); |
| } |
| |
| static void |
| dg1_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| gen12_gt_workarounds_init(gt, wal); |
| |
| /* Wa_1409420604:dg1 */ |
| wa_mcr_write_or(wal, SUBSLICE_UNIT_LEVEL_CLKGATE2, |
| CPSSUNIT_CLKGATE_DIS); |
| |
| /* Wa_1408615072:dg1 */ |
| /* Empirical testing shows this register is unaffected by engine reset. */ |
| wa_write_or(wal, UNSLICE_UNIT_LEVEL_CLKGATE2, VSUNIT_CLKGATE_DIS_TGL); |
| } |
| |
| static void |
| xehpsdv_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| struct drm_i915_private *i915 = gt->i915; |
| |
| xehp_init_mcr(gt, wal); |
| |
| /* Wa_1409757795:xehpsdv */ |
| wa_mcr_write_or(wal, SCCGCTL94DC, CG3DDISURB); |
| |
| /* Wa_18011725039:xehpsdv */ |
| if (IS_XEHPSDV_GRAPHICS_STEP(i915, STEP_A1, STEP_B0)) { |
| wa_mcr_masked_dis(wal, MLTICTXCTL, TDONRENDER); |
| wa_mcr_write_or(wal, L3SQCREG1_CCS0, FLUSHALLNONCOH); |
| } |
| |
| /* Wa_16011155590:xehpsdv */ |
| if (IS_XEHPSDV_GRAPHICS_STEP(i915, STEP_A0, STEP_B0)) |
| wa_write_or(wal, UNSLICE_UNIT_LEVEL_CLKGATE, |
| TSGUNIT_CLKGATE_DIS); |
| |
| /* Wa_14011780169:xehpsdv */ |
| if (IS_XEHPSDV_GRAPHICS_STEP(i915, STEP_B0, STEP_FOREVER)) { |
| wa_write_or(wal, UNSLCGCTL9440, GAMTLBOACS_CLKGATE_DIS | |
| GAMTLBVDBOX7_CLKGATE_DIS | |
| GAMTLBVDBOX6_CLKGATE_DIS | |
| GAMTLBVDBOX5_CLKGATE_DIS | |
| GAMTLBVDBOX4_CLKGATE_DIS | |
| GAMTLBVDBOX3_CLKGATE_DIS | |
| GAMTLBVDBOX2_CLKGATE_DIS | |
| GAMTLBVDBOX1_CLKGATE_DIS | |
| GAMTLBVDBOX0_CLKGATE_DIS | |
| GAMTLBKCR_CLKGATE_DIS | |
| GAMTLBGUC_CLKGATE_DIS | |
| GAMTLBBLT_CLKGATE_DIS); |
| wa_write_or(wal, UNSLCGCTL9444, GAMTLBGFXA0_CLKGATE_DIS | |
| GAMTLBGFXA1_CLKGATE_DIS | |
| GAMTLBCOMPA0_CLKGATE_DIS | |
| GAMTLBCOMPA1_CLKGATE_DIS | |
| GAMTLBCOMPB0_CLKGATE_DIS | |
| GAMTLBCOMPB1_CLKGATE_DIS | |
| GAMTLBCOMPC0_CLKGATE_DIS | |
| GAMTLBCOMPC1_CLKGATE_DIS | |
| GAMTLBCOMPD0_CLKGATE_DIS | |
| GAMTLBCOMPD1_CLKGATE_DIS | |
| GAMTLBMERT_CLKGATE_DIS | |
| GAMTLBVEBOX3_CLKGATE_DIS | |
| GAMTLBVEBOX2_CLKGATE_DIS | |
| GAMTLBVEBOX1_CLKGATE_DIS | |
| GAMTLBVEBOX0_CLKGATE_DIS); |
| } |
| |
| /* Wa_16012725990:xehpsdv */ |
| if (IS_XEHPSDV_GRAPHICS_STEP(i915, STEP_A1, STEP_FOREVER)) |
| wa_write_or(wal, UNSLICE_UNIT_LEVEL_CLKGATE, VFUNIT_CLKGATE_DIS); |
| |
| /* Wa_14011060649:xehpsdv */ |
| wa_14011060649(gt, wal); |
| |
| /* Wa_14012362059:xehpsdv */ |
| wa_mcr_write_or(wal, XEHP_MERT_MOD_CTRL, FORCE_MISS_FTLB); |
| |
| /* Wa_14014368820:xehpsdv */ |
| wa_mcr_write_or(wal, XEHP_GAMCNTRL_CTRL, |
| INVALIDATION_BROADCAST_MODE_DIS | GLOBAL_INVALIDATION_MODE); |
| |
| /* Wa_14010670810:xehpsdv */ |
| wa_mcr_write_or(wal, XEHP_L3NODEARBCFG, XEHP_LNESPARE); |
| } |
| |
| static void |
| dg2_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| xehp_init_mcr(gt, wal); |
| |
| /* Wa_14011060649:dg2 */ |
| wa_14011060649(gt, wal); |
| |
| if (IS_DG2_G10(gt->i915)) { |
| /* Wa_22010523718:dg2 */ |
| wa_write_or(wal, UNSLICE_UNIT_LEVEL_CLKGATE, |
| CG3DDISCFEG_CLKGATE_DIS); |
| |
| /* Wa_14011006942:dg2 */ |
| wa_mcr_write_or(wal, GEN11_SUBSLICE_UNIT_LEVEL_CLKGATE, |
| DSS_ROUTER_CLKGATE_DIS); |
| } |
| |
| /* Wa_14014830051:dg2 */ |
| wa_mcr_write_clr(wal, SARB_CHICKEN1, COMP_CKN_IN); |
| |
| /* |
| * Wa_14015795083 |
| * Skip verification for possibly locked register. |
| */ |
| wa_add(wal, GEN7_MISCCPCTL, GEN12_DOP_CLOCK_GATE_RENDER_ENABLE, |
| 0, 0, false); |
| |
| /* Wa_18018781329 */ |
| wa_mcr_write_or(wal, RENDER_MOD_CTRL, FORCE_MISS_FTLB); |
| wa_mcr_write_or(wal, COMP_MOD_CTRL, FORCE_MISS_FTLB); |
| wa_mcr_write_or(wal, XEHP_VDBX_MOD_CTRL, FORCE_MISS_FTLB); |
| wa_mcr_write_or(wal, XEHP_VEBX_MOD_CTRL, FORCE_MISS_FTLB); |
| |
| /* Wa_1509235366:dg2 */ |
| wa_mcr_write_or(wal, XEHP_GAMCNTRL_CTRL, |
| INVALIDATION_BROADCAST_MODE_DIS | GLOBAL_INVALIDATION_MODE); |
| |
| /* Wa_14010648519:dg2 */ |
| wa_mcr_write_or(wal, XEHP_L3NODEARBCFG, XEHP_LNESPARE); |
| } |
| |
| static void |
| pvc_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| pvc_init_mcr(gt, wal); |
| |
| /* Wa_14015795083 */ |
| wa_write_clr(wal, GEN7_MISCCPCTL, GEN12_DOP_CLOCK_GATE_RENDER_ENABLE); |
| |
| /* Wa_18018781329 */ |
| wa_mcr_write_or(wal, RENDER_MOD_CTRL, FORCE_MISS_FTLB); |
| wa_mcr_write_or(wal, COMP_MOD_CTRL, FORCE_MISS_FTLB); |
| wa_mcr_write_or(wal, XEHP_VDBX_MOD_CTRL, FORCE_MISS_FTLB); |
| wa_mcr_write_or(wal, XEHP_VEBX_MOD_CTRL, FORCE_MISS_FTLB); |
| |
| /* Wa_16016694945 */ |
| wa_mcr_masked_en(wal, XEHPC_LNCFMISCCFGREG0, XEHPC_OVRLSCCC); |
| } |
| |
| static void |
| xelpg_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| /* Wa_14018575942 / Wa_18018781329 */ |
| wa_mcr_write_or(wal, COMP_MOD_CTRL, FORCE_MISS_FTLB); |
| |
| /* Wa_22016670082 */ |
| wa_write_or(wal, GEN12_SQCNT1, GEN12_STRICT_RAR_ENABLE); |
| |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0)) { |
| /* Wa_14014830051 */ |
| wa_mcr_write_clr(wal, SARB_CHICKEN1, COMP_CKN_IN); |
| |
| /* Wa_14015795083 */ |
| wa_write_clr(wal, GEN7_MISCCPCTL, GEN12_DOP_CLOCK_GATE_RENDER_ENABLE); |
| } |
| |
| /* |
| * Unlike older platforms, we no longer setup implicit steering here; |
| * all MCR accesses are explicitly steered. |
| */ |
| debug_dump_steering(gt); |
| } |
| |
| static void |
| wa_16021867713(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| struct intel_engine_cs *engine; |
| int id; |
| |
| for_each_engine(engine, gt, id) |
| if (engine->class == VIDEO_DECODE_CLASS) |
| wa_write_or(wal, VDBOX_CGCTL3F1C(engine->mmio_base), |
| MFXPIPE_CLKGATE_DIS); |
| } |
| |
| static void |
| xelpmp_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| wa_16021867713(gt, wal); |
| |
| /* |
| * Wa_14018778641 |
| * Wa_18018781329 |
| * |
| * Note that although these registers are MCR on the primary |
| * GT, the media GT's versions are regular singleton registers. |
| */ |
| wa_write_or(wal, XELPMP_GSC_MOD_CTRL, FORCE_MISS_FTLB); |
| |
| /* Wa_22016670082 */ |
| wa_write_or(wal, GEN12_SQCNT1, GEN12_STRICT_RAR_ENABLE); |
| |
| debug_dump_steering(gt); |
| } |
| |
| /* |
| * The bspec performance guide has recommended MMIO tuning settings. These |
| * aren't truly "workarounds" but we want to program them through the |
| * workaround infrastructure to make sure they're (re)applied at the proper |
| * times. |
| * |
| * The programming in this function is for settings that persist through |
| * engine resets and also are not part of any engine's register state context. |
| * I.e., settings that only need to be re-applied in the event of a full GT |
| * reset. |
| */ |
| static void gt_tuning_settings(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| if (IS_GFX_GT_IP_RANGE(gt, IP_VER(12, 70), IP_VER(12, 74))) { |
| wa_mcr_write_or(wal, XEHP_L3SCQREG7, BLEND_FILL_CACHING_OPT_DIS); |
| wa_mcr_write_or(wal, XEHP_SQCM, EN_32B_ACCESS); |
| } |
| |
| if (IS_PONTEVECCHIO(gt->i915)) { |
| wa_mcr_write(wal, XEHPC_L3SCRUB, |
| SCRUB_CL_DWNGRADE_SHARED | SCRUB_RATE_4B_PER_CLK); |
| wa_mcr_masked_en(wal, XEHPC_LNCFMISCCFGREG0, XEHPC_HOSTCACHEEN); |
| } |
| |
| if (IS_DG2(gt->i915)) { |
| wa_mcr_write_or(wal, XEHP_L3SCQREG7, BLEND_FILL_CACHING_OPT_DIS); |
| wa_mcr_write_or(wal, XEHP_SQCM, EN_32B_ACCESS); |
| } |
| } |
| |
| static void |
| gt_init_workarounds(struct intel_gt *gt, struct i915_wa_list *wal) |
| { |
| struct drm_i915_private *i915 = gt->i915; |
| |
| gt_tuning_settings(gt, wal); |
| |
| if (gt->type == GT_MEDIA) { |
| if (MEDIA_VER_FULL(i915) == IP_VER(13, 0)) |
| xelpmp_gt_workarounds_init(gt, wal); |
| else |
| MISSING_CASE(MEDIA_VER_FULL(i915)); |
| |
| return; |
| } |
| |
| if (IS_GFX_GT_IP_RANGE(gt, IP_VER(12, 70), IP_VER(12, 74))) |
| xelpg_gt_workarounds_init(gt, wal); |
| else if (IS_PONTEVECCHIO(i915)) |
| pvc_gt_workarounds_init(gt, wal); |
| else if (IS_DG2(i915)) |
| dg2_gt_workarounds_init(gt, wal); |
| else if (IS_XEHPSDV(i915)) |
| xehpsdv_gt_workarounds_init(gt, wal); |
| else if (IS_DG1(i915)) |
| dg1_gt_workarounds_init(gt, wal); |
| else if (GRAPHICS_VER(i915) == 12) |
| gen12_gt_workarounds_init(gt, wal); |
| else if (GRAPHICS_VER(i915) == 11) |
| icl_gt_workarounds_init(gt, wal); |
| else if (IS_COFFEELAKE(i915) || IS_COMETLAKE(i915)) |
| cfl_gt_workarounds_init(gt, wal); |
| else if (IS_GEMINILAKE(i915)) |
| glk_gt_workarounds_init(gt, wal); |
| else if (IS_KABYLAKE(i915)) |
| kbl_gt_workarounds_init(gt, wal); |
| else if (IS_BROXTON(i915)) |
| gen9_gt_workarounds_init(gt, wal); |
| else if (IS_SKYLAKE(i915)) |
| skl_gt_workarounds_init(gt, wal); |
| else if (IS_HASWELL(i915)) |
| hsw_gt_workarounds_init(gt, wal); |
| else if (IS_VALLEYVIEW(i915)) |
| vlv_gt_workarounds_init(gt, wal); |
| else if (IS_IVYBRIDGE(i915)) |
| ivb_gt_workarounds_init(gt, wal); |
| else if (GRAPHICS_VER(i915) == 6) |
| snb_gt_workarounds_init(gt, wal); |
| else if (GRAPHICS_VER(i915) == 5) |
| ilk_gt_workarounds_init(gt, wal); |
| else if (IS_G4X(i915)) |
| g4x_gt_workarounds_init(gt, wal); |
| else if (GRAPHICS_VER(i915) == 4) |
| gen4_gt_workarounds_init(gt, wal); |
| else if (GRAPHICS_VER(i915) <= 8) |
| ; |
| else |
| MISSING_CASE(GRAPHICS_VER(i915)); |
| } |
| |
| void intel_gt_init_workarounds(struct intel_gt *gt) |
| { |
| struct i915_wa_list *wal = >->wa_list; |
| |
| wa_init_start(wal, gt, "GT", "global"); |
| gt_init_workarounds(gt, wal); |
| wa_init_finish(wal); |
| } |
| |
| static bool |
| wa_verify(struct intel_gt *gt, const struct i915_wa *wa, u32 cur, |
| const char *name, const char *from) |
| { |
| if ((cur ^ wa->set) & wa->read) { |
| gt_err(gt, |
| "%s workaround lost on %s! (reg[%x]=0x%x, relevant bits were 0x%x vs expected 0x%x)\n", |
| name, from, i915_mmio_reg_offset(wa->reg), |
| cur, cur & wa->read, wa->set & wa->read); |
| |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static void wa_list_apply(const struct i915_wa_list *wal) |
| { |
| struct intel_gt *gt = wal->gt; |
| struct intel_uncore *uncore = gt->uncore; |
| enum forcewake_domains fw; |
| unsigned long flags; |
| struct i915_wa *wa; |
| unsigned int i; |
| |
| if (!wal->count) |
| return; |
| |
| fw = wal_get_fw_for_rmw(uncore, wal); |
| |
| intel_gt_mcr_lock(gt, &flags); |
| spin_lock(&uncore->lock); |
| intel_uncore_forcewake_get__locked(uncore, fw); |
| |
| for (i = 0, wa = wal->list; i < wal->count; i++, wa++) { |
| u32 val, old = 0; |
| |
| /* open-coded rmw due to steering */ |
| if (wa->clr) |
| old = wa->is_mcr ? |
| intel_gt_mcr_read_any_fw(gt, wa->mcr_reg) : |
| intel_uncore_read_fw(uncore, wa->reg); |
| val = (old & ~wa->clr) | wa->set; |
| if (val != old || !wa->clr) { |
| if (wa->is_mcr) |
| intel_gt_mcr_multicast_write_fw(gt, wa->mcr_reg, val); |
| else |
| intel_uncore_write_fw(uncore, wa->reg, val); |
| } |
| |
| if (IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM)) { |
| u32 val = wa->is_mcr ? |
| intel_gt_mcr_read_any_fw(gt, wa->mcr_reg) : |
| intel_uncore_read_fw(uncore, wa->reg); |
| |
| wa_verify(gt, wa, val, wal->name, "application"); |
| } |
| } |
| |
| intel_uncore_forcewake_put__locked(uncore, fw); |
| spin_unlock(&uncore->lock); |
| intel_gt_mcr_unlock(gt, flags); |
| } |
| |
| void intel_gt_apply_workarounds(struct intel_gt *gt) |
| { |
| wa_list_apply(>->wa_list); |
| } |
| |
| static bool wa_list_verify(struct intel_gt *gt, |
| const struct i915_wa_list *wal, |
| const char *from) |
| { |
| struct intel_uncore *uncore = gt->uncore; |
| struct i915_wa *wa; |
| enum forcewake_domains fw; |
| unsigned long flags; |
| unsigned int i; |
| bool ok = true; |
| |
| fw = wal_get_fw_for_rmw(uncore, wal); |
| |
| intel_gt_mcr_lock(gt, &flags); |
| spin_lock(&uncore->lock); |
| intel_uncore_forcewake_get__locked(uncore, fw); |
| |
| for (i = 0, wa = wal->list; i < wal->count; i++, wa++) |
| ok &= wa_verify(wal->gt, wa, wa->is_mcr ? |
| intel_gt_mcr_read_any_fw(gt, wa->mcr_reg) : |
| intel_uncore_read_fw(uncore, wa->reg), |
| wal->name, from); |
| |
| intel_uncore_forcewake_put__locked(uncore, fw); |
| spin_unlock(&uncore->lock); |
| intel_gt_mcr_unlock(gt, flags); |
| |
| return ok; |
| } |
| |
| bool intel_gt_verify_workarounds(struct intel_gt *gt, const char *from) |
| { |
| return wa_list_verify(gt, >->wa_list, from); |
| } |
| |
| __maybe_unused |
| static bool is_nonpriv_flags_valid(u32 flags) |
| { |
| /* Check only valid flag bits are set */ |
| if (flags & ~RING_FORCE_TO_NONPRIV_MASK_VALID) |
| return false; |
| |
| /* NB: Only 3 out of 4 enum values are valid for access field */ |
| if ((flags & RING_FORCE_TO_NONPRIV_ACCESS_MASK) == |
| RING_FORCE_TO_NONPRIV_ACCESS_INVALID) |
| return false; |
| |
| return true; |
| } |
| |
| static void |
| whitelist_reg_ext(struct i915_wa_list *wal, i915_reg_t reg, u32 flags) |
| { |
| struct i915_wa wa = { |
| .reg = reg |
| }; |
| |
| if (GEM_DEBUG_WARN_ON(wal->count >= RING_MAX_NONPRIV_SLOTS)) |
| return; |
| |
| if (GEM_DEBUG_WARN_ON(!is_nonpriv_flags_valid(flags))) |
| return; |
| |
| wa.reg.reg |= flags; |
| _wa_add(wal, &wa); |
| } |
| |
| static void |
| whitelist_mcr_reg_ext(struct i915_wa_list *wal, i915_mcr_reg_t reg, u32 flags) |
| { |
| struct i915_wa wa = { |
| .mcr_reg = reg, |
| .is_mcr = 1, |
| }; |
| |
| if (GEM_DEBUG_WARN_ON(wal->count >= RING_MAX_NONPRIV_SLOTS)) |
| return; |
| |
| if (GEM_DEBUG_WARN_ON(!is_nonpriv_flags_valid(flags))) |
| return; |
| |
| wa.mcr_reg.reg |= flags; |
| _wa_add(wal, &wa); |
| } |
| |
| static void |
| whitelist_reg(struct i915_wa_list *wal, i915_reg_t reg) |
| { |
| whitelist_reg_ext(wal, reg, RING_FORCE_TO_NONPRIV_ACCESS_RW); |
| } |
| |
| static void |
| whitelist_mcr_reg(struct i915_wa_list *wal, i915_mcr_reg_t reg) |
| { |
| whitelist_mcr_reg_ext(wal, reg, RING_FORCE_TO_NONPRIV_ACCESS_RW); |
| } |
| |
| static void gen9_whitelist_build(struct i915_wa_list *w) |
| { |
| /* WaVFEStateAfterPipeControlwithMediaStateClear:skl,bxt,glk,cfl */ |
| whitelist_reg(w, GEN9_CTX_PREEMPT_REG); |
| |
| /* WaEnablePreemptionGranularityControlByUMD:skl,bxt,kbl,cfl,[cnl] */ |
| whitelist_reg(w, GEN8_CS_CHICKEN1); |
| |
| /* WaAllowUMDToModifyHDCChicken1:skl,bxt,kbl,glk,cfl */ |
| whitelist_reg(w, GEN8_HDC_CHICKEN1); |
| |
| /* WaSendPushConstantsFromMMIO:skl,bxt */ |
| whitelist_reg(w, COMMON_SLICE_CHICKEN2); |
| } |
| |
| static void skl_whitelist_build(struct intel_engine_cs *engine) |
| { |
| struct i915_wa_list *w = &engine->whitelist; |
| |
| if (engine->class != RENDER_CLASS) |
| return; |
| |
| gen9_whitelist_build(w); |
| |
| /* WaDisableLSQCROPERFforOCL:skl */ |
| whitelist_mcr_reg(w, GEN8_L3SQCREG4); |
| } |
| |
| static void bxt_whitelist_build(struct intel_engine_cs *engine) |
| { |
| if (engine->class != RENDER_CLASS) |
| return; |
| |
| gen9_whitelist_build(&engine->whitelist); |
| } |
| |
| static void kbl_whitelist_build(struct intel_engine_cs *engine) |
| { |
| struct i915_wa_list *w = &engine->whitelist; |
| |
| if (engine->class != RENDER_CLASS) |
| return; |
| |
| gen9_whitelist_build(w); |
| |
| /* WaDisableLSQCROPERFforOCL:kbl */ |
| whitelist_mcr_reg(w, GEN8_L3SQCREG4); |
| } |
| |
| static void glk_whitelist_build(struct intel_engine_cs *engine) |
| { |
| struct i915_wa_list *w = &engine->whitelist; |
| |
| if (engine->class != RENDER_CLASS) |
| return; |
| |
| gen9_whitelist_build(w); |
| |
| /* WA #0862: Userspace has to set "Barrier Mode" to avoid hangs. */ |
| whitelist_reg(w, GEN9_SLICE_COMMON_ECO_CHICKEN1); |
| } |
| |
| static void cfl_whitelist_build(struct intel_engine_cs *engine) |
| { |
| struct i915_wa_list *w = &engine->whitelist; |
| |
| if (engine->class != RENDER_CLASS) |
| return; |
| |
| gen9_whitelist_build(w); |
| |
| /* |
| * WaAllowPMDepthAndInvocationCountAccessFromUMD:cfl,whl,cml,aml |
| * |
| * This covers 4 register which are next to one another : |
| * - PS_INVOCATION_COUNT |
| * - PS_INVOCATION_COUNT_UDW |
| * - PS_DEPTH_COUNT |
| * - PS_DEPTH_COUNT_UDW |
| */ |
| whitelist_reg_ext(w, PS_INVOCATION_COUNT, |
| RING_FORCE_TO_NONPRIV_ACCESS_RD | |
| RING_FORCE_TO_NONPRIV_RANGE_4); |
| } |
| |
| static void allow_read_ctx_timestamp(struct intel_engine_cs *engine) |
| { |
| struct i915_wa_list *w = &engine->whitelist; |
| |
| if (engine->class != RENDER_CLASS) |
| whitelist_reg_ext(w, |
| RING_CTX_TIMESTAMP(engine->mmio_base), |
| RING_FORCE_TO_NONPRIV_ACCESS_RD); |
| } |
| |
| static void cml_whitelist_build(struct intel_engine_cs *engine) |
| { |
| allow_read_ctx_timestamp(engine); |
| |
| cfl_whitelist_build(engine); |
| } |
| |
| static void icl_whitelist_build(struct intel_engine_cs *engine) |
| { |
| struct i915_wa_list *w = &engine->whitelist; |
| |
| allow_read_ctx_timestamp(engine); |
| |
| switch (engine->class) { |
| case RENDER_CLASS: |
| /* WaAllowUMDToModifyHalfSliceChicken7:icl */ |
| whitelist_mcr_reg(w, GEN9_HALF_SLICE_CHICKEN7); |
| |
| /* WaAllowUMDToModifySamplerMode:icl */ |
| whitelist_mcr_reg(w, GEN10_SAMPLER_MODE); |
| |
| /* WaEnableStateCacheRedirectToCS:icl */ |
| whitelist_reg(w, GEN9_SLICE_COMMON_ECO_CHICKEN1); |
| |
| /* |
| * WaAllowPMDepthAndInvocationCountAccessFromUMD:icl |
| * |
| * This covers 4 register which are next to one another : |
| * - PS_INVOCATION_COUNT |
| * - PS_INVOCATION_COUNT_UDW |
| * - PS_DEPTH_COUNT |
| * - PS_DEPTH_COUNT_UDW |
| */ |
| whitelist_reg_ext(w, PS_INVOCATION_COUNT, |
| RING_FORCE_TO_NONPRIV_ACCESS_RD | |
| RING_FORCE_TO_NONPRIV_RANGE_4); |
| break; |
| |
| case VIDEO_DECODE_CLASS: |
| /* hucStatusRegOffset */ |
| whitelist_reg_ext(w, _MMIO(0x2000 + engine->mmio_base), |
| RING_FORCE_TO_NONPRIV_ACCESS_RD); |
| /* hucUKernelHdrInfoRegOffset */ |
| whitelist_reg_ext(w, _MMIO(0x2014 + engine->mmio_base), |
| RING_FORCE_TO_NONPRIV_ACCESS_RD); |
| /* hucStatus2RegOffset */ |
| whitelist_reg_ext(w, _MMIO(0x23B0 + engine->mmio_base), |
| RING_FORCE_TO_NONPRIV_ACCESS_RD); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| static void tgl_whitelist_build(struct intel_engine_cs *engine) |
| { |
| struct i915_wa_list *w = &engine->whitelist; |
| |
| allow_read_ctx_timestamp(engine); |
| |
| switch (engine->class) { |
| case RENDER_CLASS: |
| /* |
| * WaAllowPMDepthAndInvocationCountAccessFromUMD:tgl |
| * Wa_1408556865:tgl |
| * |
| * This covers 4 registers which are next to one another : |
| * - PS_INVOCATION_COUNT |
| * - PS_INVOCATION_COUNT_UDW |
| * - PS_DEPTH_COUNT |
| * - PS_DEPTH_COUNT_UDW |
| */ |
| whitelist_reg_ext(w, PS_INVOCATION_COUNT, |
| RING_FORCE_TO_NONPRIV_ACCESS_RD | |
| RING_FORCE_TO_NONPRIV_RANGE_4); |
| |
| /* |
| * Wa_1808121037:tgl |
| * Wa_14012131227:dg1 |
| * Wa_1508744258:tgl,rkl,dg1,adl-s,adl-p |
| */ |
| whitelist_reg(w, GEN7_COMMON_SLICE_CHICKEN1); |
| |
| /* Wa_1806527549:tgl */ |
| whitelist_reg(w, HIZ_CHICKEN); |
| |
| /* Required by recommended tuning setting (not a workaround) */ |
| whitelist_reg(w, GEN11_COMMON_SLICE_CHICKEN3); |
| |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void dg2_whitelist_build(struct intel_engine_cs *engine) |
| { |
| struct i915_wa_list *w = &engine->whitelist; |
| |
| switch (engine->class) { |
| case RENDER_CLASS: |
| /* Required by recommended tuning setting (not a workaround) */ |
| whitelist_mcr_reg(w, XEHP_COMMON_SLICE_CHICKEN3); |
| |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void blacklist_trtt(struct intel_engine_cs *engine) |
| { |
| struct i915_wa_list *w = &engine->whitelist; |
| |
| /* |
| * Prevent read/write access to [0x4400, 0x4600) which covers |
| * the TRTT range across all engines. Note that normally userspace |
| * cannot access the other engines' trtt control, but for simplicity |
| * we cover the entire range on each engine. |
| */ |
| whitelist_reg_ext(w, _MMIO(0x4400), |
| RING_FORCE_TO_NONPRIV_DENY | |
| RING_FORCE_TO_NONPRIV_RANGE_64); |
| whitelist_reg_ext(w, _MMIO(0x4500), |
| RING_FORCE_TO_NONPRIV_DENY | |
| RING_FORCE_TO_NONPRIV_RANGE_64); |
| } |
| |
| static void pvc_whitelist_build(struct intel_engine_cs *engine) |
| { |
| /* Wa_16014440446:pvc */ |
| blacklist_trtt(engine); |
| } |
| |
| static void xelpg_whitelist_build(struct intel_engine_cs *engine) |
| { |
| struct i915_wa_list *w = &engine->whitelist; |
| |
| switch (engine->class) { |
| case RENDER_CLASS: |
| /* Required by recommended tuning setting (not a workaround) */ |
| whitelist_mcr_reg(w, XEHP_COMMON_SLICE_CHICKEN3); |
| |
| break; |
| default: |
| break; |
| } |
| } |
| |
| void intel_engine_init_whitelist(struct intel_engine_cs *engine) |
| { |
| struct drm_i915_private *i915 = engine->i915; |
| struct i915_wa_list *w = &engine->whitelist; |
| |
| wa_init_start(w, engine->gt, "whitelist", engine->name); |
| |
| if (engine->gt->type == GT_MEDIA) |
| ; /* none yet */ |
| else if (IS_GFX_GT_IP_RANGE(engine->gt, IP_VER(12, 70), IP_VER(12, 74))) |
| xelpg_whitelist_build(engine); |
| else if (IS_PONTEVECCHIO(i915)) |
| pvc_whitelist_build(engine); |
| else if (IS_DG2(i915)) |
| dg2_whitelist_build(engine); |
| else if (IS_XEHPSDV(i915)) |
| ; /* none needed */ |
| else if (GRAPHICS_VER(i915) == 12) |
| tgl_whitelist_build(engine); |
| else if (GRAPHICS_VER(i915) == 11) |
| icl_whitelist_build(engine); |
| else if (IS_COMETLAKE(i915)) |
| cml_whitelist_build(engine); |
| else if (IS_COFFEELAKE(i915)) |
| cfl_whitelist_build(engine); |
| else if (IS_GEMINILAKE(i915)) |
| glk_whitelist_build(engine); |
| else if (IS_KABYLAKE(i915)) |
| kbl_whitelist_build(engine); |
| else if (IS_BROXTON(i915)) |
| bxt_whitelist_build(engine); |
| else if (IS_SKYLAKE(i915)) |
| skl_whitelist_build(engine); |
| else if (GRAPHICS_VER(i915) <= 8) |
| ; |
| else |
| MISSING_CASE(GRAPHICS_VER(i915)); |
| |
| wa_init_finish(w); |
| } |
| |
| void intel_engine_apply_whitelist(struct intel_engine_cs *engine) |
| { |
| const struct i915_wa_list *wal = &engine->whitelist; |
| struct intel_uncore *uncore = engine->uncore; |
| const u32 base = engine->mmio_base; |
| struct i915_wa *wa; |
| unsigned int i; |
| |
| if (!wal->count) |
| return; |
| |
| for (i = 0, wa = wal->list; i < wal->count; i++, wa++) |
| intel_uncore_write(uncore, |
| RING_FORCE_TO_NONPRIV(base, i), |
| i915_mmio_reg_offset(wa->reg)); |
| |
| /* And clear the rest just in case of garbage */ |
| for (; i < RING_MAX_NONPRIV_SLOTS; i++) |
| intel_uncore_write(uncore, |
| RING_FORCE_TO_NONPRIV(base, i), |
| i915_mmio_reg_offset(RING_NOPID(base))); |
| } |
| |
| /* |
| * engine_fake_wa_init(), a place holder to program the registers |
| * which are not part of an official workaround defined by the |
| * hardware team. |
| * Adding programming of those register inside workaround will |
| * allow utilizing wa framework to proper application and verification. |
| */ |
| static void |
| engine_fake_wa_init(struct intel_engine_cs *engine, struct i915_wa_list *wal) |
| { |
| u8 mocs_w, mocs_r; |
| |
| /* |
| * RING_CMD_CCTL specifies the default MOCS entry that will be used |
| * by the command streamer when executing commands that don't have |
| * a way to explicitly specify a MOCS setting. The default should |
| * usually reference whichever MOCS entry corresponds to uncached |
| * behavior, although use of a WB cached entry is recommended by the |
| * spec in certain circumstances on specific platforms. |
| */ |
| if (GRAPHICS_VER(engine->i915) >= 12) { |
| mocs_r = engine->gt->mocs.uc_index; |
| mocs_w = engine->gt->mocs.uc_index; |
| |
| if (HAS_L3_CCS_READ(engine->i915) && |
| engine->class == COMPUTE_CLASS) { |
| mocs_r = engine->gt->mocs.wb_index; |
| |
| /* |
| * Even on the few platforms where MOCS 0 is a |
| * legitimate table entry, it's never the correct |
| * setting to use here; we can assume the MOCS init |
| * just forgot to initialize wb_index. |
| */ |
| drm_WARN_ON(&engine->i915->drm, mocs_r == 0); |
| } |
| |
| wa_masked_field_set(wal, |
| RING_CMD_CCTL(engine->mmio_base), |
| CMD_CCTL_MOCS_MASK, |
| CMD_CCTL_MOCS_OVERRIDE(mocs_w, mocs_r)); |
| } |
| } |
| |
| static void |
| rcs_engine_wa_init(struct intel_engine_cs *engine, struct i915_wa_list *wal) |
| { |
| struct drm_i915_private *i915 = engine->i915; |
| struct intel_gt *gt = engine->gt; |
| |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0)) { |
| /* Wa_22014600077 */ |
| wa_mcr_masked_en(wal, GEN10_CACHE_MODE_SS, |
| ENABLE_EU_COUNT_FOR_TDL_FLUSH); |
| } |
| |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0) || |
| IS_DG2(i915)) { |
| /* Wa_1509727124 */ |
| wa_mcr_masked_en(wal, GEN10_SAMPLER_MODE, |
| SC_DISABLE_POWER_OPTIMIZATION_EBB); |
| } |
| |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || |
| IS_DG2(i915)) { |
| /* Wa_22012856258 */ |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN2, |
| GEN12_DISABLE_READ_SUPPRESSION); |
| } |
| |
| if (IS_DG2(i915)) { |
| /* |
| * Wa_22010960976:dg2 |
| * Wa_14013347512:dg2 |
| */ |
| wa_mcr_masked_dis(wal, XEHP_HDC_CHICKEN0, |
| LSC_L1_FLUSH_CTL_3D_DATAPORT_FLUSH_EVENTS_MASK); |
| } |
| |
| if (IS_GFX_GT_IP_RANGE(gt, IP_VER(12, 70), IP_VER(12, 71)) || |
| IS_DG2(i915)) { |
| /* Wa_14015150844 */ |
| wa_mcr_add(wal, XEHP_HDC_CHICKEN0, 0, |
| _MASKED_BIT_ENABLE(DIS_ATOMIC_CHAINING_TYPED_WRITES), |
| 0, true); |
| } |
| |
| if (IS_DG2(i915) || IS_ALDERLAKE_P(i915) || IS_ALDERLAKE_S(i915) || |
| IS_DG1(i915) || IS_ROCKETLAKE(i915) || IS_TIGERLAKE(i915)) { |
| /* |
| * Wa_1606700617:tgl,dg1,adl-p |
| * Wa_22010271021:tgl,rkl,dg1,adl-s,adl-p |
| * Wa_14010826681:tgl,dg1,rkl,adl-p |
| * Wa_18019627453:dg2 |
| */ |
| wa_masked_en(wal, |
| GEN9_CS_DEBUG_MODE1, |
| FF_DOP_CLOCK_GATE_DISABLE); |
| } |
| |
| if (IS_ALDERLAKE_P(i915) || IS_ALDERLAKE_S(i915) || IS_DG1(i915) || |
| IS_ROCKETLAKE(i915) || IS_TIGERLAKE(i915)) { |
| /* Wa_1606931601:tgl,rkl,dg1,adl-s,adl-p */ |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN2, GEN12_DISABLE_EARLY_READ); |
| |
| /* |
| * Wa_1407928979:tgl A* |
| * Wa_18011464164:tgl[B0+],dg1[B0+] |
| * Wa_22010931296:tgl[B0+],dg1[B0+] |
| * Wa_14010919138:rkl,dg1,adl-s,adl-p |
| */ |
| wa_write_or(wal, GEN7_FF_THREAD_MODE, |
| GEN12_FF_TESSELATION_DOP_GATE_DISABLE); |
| |
| /* Wa_1406941453:tgl,rkl,dg1,adl-s,adl-p */ |
| wa_mcr_masked_en(wal, |
| GEN10_SAMPLER_MODE, |
| ENABLE_SMALLPL); |
| } |
| |
| if (IS_ALDERLAKE_P(i915) || IS_ALDERLAKE_S(i915) || |
| IS_ROCKETLAKE(i915) || IS_TIGERLAKE(i915)) { |
| /* Wa_1409804808 */ |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN2, |
| GEN12_PUSH_CONST_DEREF_HOLD_DIS); |
| |
| /* Wa_14010229206 */ |
| wa_mcr_masked_en(wal, GEN9_ROW_CHICKEN4, GEN12_DISABLE_TDL_PUSH); |
| } |
| |
| if (IS_ROCKETLAKE(i915) || IS_TIGERLAKE(i915) || IS_ALDERLAKE_P(i915)) { |
| /* |
| * Wa_1607297627 |
| * |
| * On TGL and RKL there are multiple entries for this WA in the |
| * BSpec; some indicate this is an A0-only WA, others indicate |
| * it applies to all steppings so we trust the "all steppings." |
| */ |
| wa_masked_en(wal, |
| RING_PSMI_CTL(RENDER_RING_BASE), |
| GEN12_WAIT_FOR_EVENT_POWER_DOWN_DISABLE | |
| GEN8_RC_SEMA_IDLE_MSG_DISABLE); |
| } |
| |
| if (GRAPHICS_VER(i915) == 11) { |
| /* This is not an Wa. Enable for better image quality */ |
| wa_masked_en(wal, |
| _3D_CHICKEN3, |
| _3D_CHICKEN3_AA_LINE_QUALITY_FIX_ENABLE); |
| |
| /* |
| * Wa_1405543622:icl |
| * Formerly known as WaGAPZPriorityScheme |
| */ |
| wa_write_or(wal, |
| GEN8_GARBCNTL, |
| GEN11_ARBITRATION_PRIO_ORDER_MASK); |
| |
| /* |
| * Wa_1604223664:icl |
| * Formerly known as WaL3BankAddressHashing |
| */ |
| wa_write_clr_set(wal, |
| GEN8_GARBCNTL, |
| GEN11_HASH_CTRL_EXCL_MASK, |
| GEN11_HASH_CTRL_EXCL_BIT0); |
| wa_write_clr_set(wal, |
| GEN11_GLBLINVL, |
| GEN11_BANK_HASH_ADDR_EXCL_MASK, |
| GEN11_BANK_HASH_ADDR_EXCL_BIT0); |
| |
| /* |
| * Wa_1405733216:icl |
| * Formerly known as WaDisableCleanEvicts |
| */ |
| wa_mcr_write_or(wal, |
| GEN8_L3SQCREG4, |
| GEN11_LQSC_CLEAN_EVICT_DISABLE); |
| |
| /* Wa_1606682166:icl */ |
| wa_write_or(wal, |
| GEN7_SARCHKMD, |
| GEN7_DISABLE_SAMPLER_PREFETCH); |
| |
| /* Wa_1409178092:icl */ |
| wa_mcr_write_clr_set(wal, |
| GEN11_SCRATCH2, |
| GEN11_COHERENT_PARTIAL_WRITE_MERGE_ENABLE, |
| 0); |
| |
| /* WaEnable32PlaneMode:icl */ |
| wa_masked_en(wal, GEN9_CSFE_CHICKEN1_RCS, |
| GEN11_ENABLE_32_PLANE_MODE); |
| |
| /* |
| * Wa_1408767742:icl[a2..forever],ehl[all] |
| * Wa_1605460711:icl[a0..c0] |
| */ |
| wa_write_or(wal, |
| GEN7_FF_THREAD_MODE, |
| GEN12_FF_TESSELATION_DOP_GATE_DISABLE); |
| |
| /* Wa_22010271021 */ |
| wa_masked_en(wal, |
| GEN9_CS_DEBUG_MODE1, |
| FF_DOP_CLOCK_GATE_DISABLE); |
| } |
| |
| /* |
| * Intel platforms that support fine-grained preemption (i.e., gen9 and |
| * beyond) allow the kernel-mode driver to choose between two different |
| * options for controlling preemption granularity and behavior. |
| * |
| * Option 1 (hardware default): |
| * Preemption settings are controlled in a global manner via |
| * kernel-only register CS_DEBUG_MODE1 (0x20EC). Any granularity |
| * and settings chosen by the kernel-mode driver will apply to all |
| * userspace clients. |
| * |
| * Option 2: |
| * Preemption settings are controlled on a per-context basis via |
| * register CS_CHICKEN1 (0x2580). CS_CHICKEN1 is saved/restored on |
| * context switch and is writable by userspace (e.g., via |
| * MI_LOAD_REGISTER_IMMEDIATE instructions placed in a batch buffer) |
| * which allows different userspace drivers/clients to select |
| * different settings, or to change those settings on the fly in |
| * response to runtime needs. This option was known by name |
| * "FtrPerCtxtPreemptionGranularityControl" at one time, although |
| * that name is somewhat misleading as other non-granularity |
| * preemption settings are also impacted by this decision. |
| * |
| * On Linux, our policy has always been to let userspace drivers |
| * control preemption granularity/settings (Option 2). This was |
| * originally mandatory on gen9 to prevent ABI breakage (old gen9 |
| * userspace developed before object-level preemption was enabled would |
| * not behave well if i915 were to go with Option 1 and enable that |
| * preemption in a global manner). On gen9 each context would have |
| * object-level preemption disabled by default (see |
| * WaDisable3DMidCmdPreemption in gen9_ctx_workarounds_init), but |
| * userspace drivers could opt-in to object-level preemption as they |
| * saw fit. For post-gen9 platforms, we continue to utilize Option 2; |
| * even though it is no longer necessary for ABI compatibility when |
| * enabling a new platform, it does ensure that userspace will be able |
| * to implement any workarounds that show up requiring temporary |
| * adjustments to preemption behavior at runtime. |
| * |
| * Notes/Workarounds: |
| * - Wa_14015141709: On DG2 and early steppings of MTL, |
| * CS_CHICKEN1[0] does not disable object-level preemption as |
| * it is supposed to (nor does CS_DEBUG_MODE1[0] if we had been |
| * using Option 1). Effectively this means userspace is unable |
| * to disable object-level preemption on these platforms/steppings |
| * despite the setting here. |
| * |
| * - Wa_16013994831: May require that userspace program |
| * CS_CHICKEN1[10] when certain runtime conditions are true. |
| * Userspace requires Option 2 to be in effect for their update of |
| * CS_CHICKEN1[10] to be effective. |
| * |
| * Other workarounds may appear in the future that will also require |
| * Option 2 behavior to allow proper userspace implementation. |
| */ |
| if (GRAPHICS_VER(i915) >= 9) |
| wa_masked_en(wal, |
| GEN7_FF_SLICE_CS_CHICKEN1, |
| GEN9_FFSC_PERCTX_PREEMPT_CTRL); |
| |
| if (IS_SKYLAKE(i915) || |
| IS_KABYLAKE(i915) || |
| IS_COFFEELAKE(i915) || |
| IS_COMETLAKE(i915)) { |
| /* WaEnableGapsTsvCreditFix:skl,kbl,cfl */ |
| wa_write_or(wal, |
| GEN8_GARBCNTL, |
| GEN9_GAPS_TSV_CREDIT_DISABLE); |
| } |
| |
| if (IS_BROXTON(i915)) { |
| /* WaDisablePooledEuLoadBalancingFix:bxt */ |
| wa_masked_en(wal, |
| FF_SLICE_CS_CHICKEN2, |
| GEN9_POOLED_EU_LOAD_BALANCING_FIX_DISABLE); |
| } |
| |
| if (GRAPHICS_VER(i915) == 9) { |
| /* WaContextSwitchWithConcurrentTLBInvalidate:skl,bxt,kbl,glk,cfl */ |
| wa_masked_en(wal, |
| GEN9_CSFE_CHICKEN1_RCS, |
| GEN9_PREEMPT_GPGPU_SYNC_SWITCH_DISABLE); |
| |
| /* WaEnableLbsSlaRetryTimerDecrement:skl,bxt,kbl,glk,cfl */ |
| wa_mcr_write_or(wal, |
| BDW_SCRATCH1, |
| GEN9_LBS_SLA_RETRY_TIMER_DECREMENT_ENABLE); |
| |
| /* WaProgramL3SqcReg1DefaultForPerf:bxt,glk */ |
| if (IS_GEN9_LP(i915)) |
| wa_mcr_write_clr_set(wal, |
| GEN8_L3SQCREG1, |
| L3_PRIO_CREDITS_MASK, |
| L3_GENERAL_PRIO_CREDITS(62) | |
| L3_HIGH_PRIO_CREDITS(2)); |
| |
| /* WaOCLCoherentLineFlush:skl,bxt,kbl,cfl */ |
| wa_mcr_write_or(wal, |
| GEN8_L3SQCREG4, |
| GEN8_LQSC_FLUSH_COHERENT_LINES); |
| |
| /* Disable atomics in L3 to prevent unrecoverable hangs */ |
| wa_write_clr_set(wal, GEN9_SCRATCH_LNCF1, |
| GEN9_LNCF_NONIA_COHERENT_ATOMICS_ENABLE, 0); |
| wa_mcr_write_clr_set(wal, GEN8_L3SQCREG4, |
| GEN8_LQSQ_NONIA_COHERENT_ATOMICS_ENABLE, 0); |
| wa_mcr_write_clr_set(wal, GEN9_SCRATCH1, |
| EVICTION_PERF_FIX_ENABLE, 0); |
| } |
| |
| if (IS_HASWELL(i915)) { |
| /* WaSampleCChickenBitEnable:hsw */ |
| wa_masked_en(wal, |
| HSW_HALF_SLICE_CHICKEN3, HSW_SAMPLE_C_PERFORMANCE); |
| |
| wa_masked_dis(wal, |
| CACHE_MODE_0_GEN7, |
| /* enable HiZ Raw Stall Optimization */ |
| HIZ_RAW_STALL_OPT_DISABLE); |
| } |
| |
| if (IS_VALLEYVIEW(i915)) { |
| /* WaDisableEarlyCull:vlv */ |
| wa_masked_en(wal, |
| _3D_CHICKEN3, |
| _3D_CHICKEN_SF_DISABLE_OBJEND_CULL); |
| |
| /* |
| * WaVSThreadDispatchOverride:ivb,vlv |
| * |
| * This actually overrides the dispatch |
| * mode for all thread types. |
| */ |
| wa_write_clr_set(wal, |
| GEN7_FF_THREAD_MODE, |
| GEN7_FF_SCHED_MASK, |
| GEN7_FF_TS_SCHED_HW | |
| GEN7_FF_VS_SCHED_HW | |
| GEN7_FF_DS_SCHED_HW); |
| |
| /* WaPsdDispatchEnable:vlv */ |
| /* WaDisablePSDDualDispatchEnable:vlv */ |
| wa_masked_en(wal, |
| GEN7_HALF_SLICE_CHICKEN1, |
| GEN7_MAX_PS_THREAD_DEP | |
| GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE); |
| } |
| |
| if (IS_IVYBRIDGE(i915)) { |
| /* WaDisableEarlyCull:ivb */ |
| wa_masked_en(wal, |
| _3D_CHICKEN3, |
| _3D_CHICKEN_SF_DISABLE_OBJEND_CULL); |
| |
| if (0) { /* causes HiZ corruption on ivb:gt1 */ |
| /* enable HiZ Raw Stall Optimization */ |
| wa_masked_dis(wal, |
| CACHE_MODE_0_GEN7, |
| HIZ_RAW_STALL_OPT_DISABLE); |
| } |
| |
| /* |
| * WaVSThreadDispatchOverride:ivb,vlv |
| * |
| * This actually overrides the dispatch |
| * mode for all thread types. |
| */ |
| wa_write_clr_set(wal, |
| GEN7_FF_THREAD_MODE, |
| GEN7_FF_SCHED_MASK, |
| GEN7_FF_TS_SCHED_HW | |
| GEN7_FF_VS_SCHED_HW | |
| GEN7_FF_DS_SCHED_HW); |
| |
| /* WaDisablePSDDualDispatchEnable:ivb */ |
| if (IS_IVB_GT1(i915)) |
| wa_masked_en(wal, |
| GEN7_HALF_SLICE_CHICKEN1, |
| GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE); |
| } |
| |
| if (GRAPHICS_VER(i915) == 7) { |
| /* WaBCSVCSTlbInvalidationMode:ivb,vlv,hsw */ |
| wa_masked_en(wal, |
| RING_MODE_GEN7(RENDER_RING_BASE), |
| GFX_TLB_INVALIDATE_EXPLICIT | GFX_REPLAY_MODE); |
| |
| /* WaDisable_RenderCache_OperationalFlush:ivb,vlv,hsw */ |
| wa_masked_dis(wal, CACHE_MODE_0_GEN7, RC_OP_FLUSH_ENABLE); |
| |
| /* |
| * BSpec says this must be set, even though |
| * WaDisable4x2SubspanOptimization:ivb,hsw |
| * WaDisable4x2SubspanOptimization isn't listed for VLV. |
| */ |
| wa_masked_en(wal, |
| CACHE_MODE_1, |
| PIXEL_SUBSPAN_COLLECT_OPT_DISABLE); |
| |
| /* |
| * BSpec recommends 8x4 when MSAA is used, |
| * however in practice 16x4 seems fastest. |
| * |
| * Note that PS/WM thread counts depend on the WIZ hashing |
| * disable bit, which we don't touch here, but it's good |
| * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM). |
| */ |
| wa_masked_field_set(wal, |
| GEN7_GT_MODE, |
| GEN6_WIZ_HASHING_MASK, |
| GEN6_WIZ_HASHING_16x4); |
| } |
| |
| if (IS_GRAPHICS_VER(i915, 6, 7)) |
| /* |
| * We need to disable the AsyncFlip performance optimisations in |
| * order to use MI_WAIT_FOR_EVENT within the CS. It should |
| * already be programmed to '1' on all products. |
| * |
| * WaDisableAsyncFlipPerfMode:snb,ivb,hsw,vlv |
| */ |
| wa_masked_en(wal, |
| RING_MI_MODE(RENDER_RING_BASE), |
| ASYNC_FLIP_PERF_DISABLE); |
| |
| if (GRAPHICS_VER(i915) == 6) { |
| /* |
| * Required for the hardware to program scanline values for |
| * waiting |
| * WaEnableFlushTlbInvalidationMode:snb |
| */ |
| wa_masked_en(wal, |
| GFX_MODE, |
| GFX_TLB_INVALIDATE_EXPLICIT); |
| |
| /* WaDisableHiZPlanesWhenMSAAEnabled:snb */ |
| wa_masked_en(wal, |
| _3D_CHICKEN, |
| _3D_CHICKEN_HIZ_PLANE_DISABLE_MSAA_4X_SNB); |
| |
| wa_masked_en(wal, |
| _3D_CHICKEN3, |
| /* WaStripsFansDisableFastClipPerformanceFix:snb */ |
| _3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL | |
| /* |
| * Bspec says: |
| * "This bit must be set if 3DSTATE_CLIP clip mode is set |
| * to normal and 3DSTATE_SF number of SF output attributes |
| * is more than 16." |
| */ |
| _3D_CHICKEN3_SF_DISABLE_PIPELINED_ATTR_FETCH); |
| |
| /* |
| * BSpec recommends 8x4 when MSAA is used, |
| * however in practice 16x4 seems fastest. |
| * |
| * Note that PS/WM thread counts depend on the WIZ hashing |
| * disable bit, which we don't touch here, but it's good |
| * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM). |
| */ |
| wa_masked_field_set(wal, |
| GEN6_GT_MODE, |
| GEN6_WIZ_HASHING_MASK, |
| GEN6_WIZ_HASHING_16x4); |
| |
| /* WaDisable_RenderCache_OperationalFlush:snb */ |
| wa_masked_dis(wal, CACHE_MODE_0, RC_OP_FLUSH_ENABLE); |
| |
| /* |
| * From the Sandybridge PRM, volume 1 part 3, page 24: |
| * "If this bit is set, STCunit will have LRA as replacement |
| * policy. [...] This bit must be reset. LRA replacement |
| * policy is not supported." |
| */ |
| wa_masked_dis(wal, |
| CACHE_MODE_0, |
| CM0_STC_EVICT_DISABLE_LRA_SNB); |
| } |
| |
| if (IS_GRAPHICS_VER(i915, 4, 6)) |
| /* WaTimedSingleVertexDispatch:cl,bw,ctg,elk,ilk,snb */ |
| wa_add(wal, RING_MI_MODE(RENDER_RING_BASE), |
| 0, _MASKED_BIT_ENABLE(VS_TIMER_DISPATCH), |
| /* XXX bit doesn't stick on Broadwater */ |
| IS_I965G(i915) ? 0 : VS_TIMER_DISPATCH, true); |
| |
| if (GRAPHICS_VER(i915) == 4) |
| /* |
| * Disable CONSTANT_BUFFER before it is loaded from the context |
| * image. For as it is loaded, it is executed and the stored |
| * address may no longer be valid, leading to a GPU hang. |
| * |
| * This imposes the requirement that userspace reload their |
| * CONSTANT_BUFFER on every batch, fortunately a requirement |
| * they are already accustomed to from before contexts were |
| * enabled. |
| */ |
| wa_add(wal, ECOSKPD(RENDER_RING_BASE), |
| 0, _MASKED_BIT_ENABLE(ECO_CONSTANT_BUFFER_SR_DISABLE), |
| 0 /* XXX bit doesn't stick on Broadwater */, |
| true); |
| } |
| |
| static void |
| xcs_engine_wa_init(struct intel_engine_cs *engine, struct i915_wa_list *wal) |
| { |
| struct drm_i915_private *i915 = engine->i915; |
| |
| /* WaKBLVECSSemaphoreWaitPoll:kbl */ |
| if (IS_KABYLAKE(i915) && IS_GRAPHICS_STEP(i915, STEP_A0, STEP_F0)) { |
| wa_write(wal, |
| RING_SEMA_WAIT_POLL(engine->mmio_base), |
| 1); |
| } |
| /* Wa_16018031267, Wa_16018063123 */ |
| if (NEEDS_FASTCOLOR_BLT_WABB(engine)) |
| wa_masked_field_set(wal, ECOSKPD(engine->mmio_base), |
| XEHP_BLITTER_SCHEDULING_MODE_MASK, |
| XEHP_BLITTER_ROUND_ROBIN_MODE); |
| } |
| |
| static void |
| ccs_engine_wa_init(struct intel_engine_cs *engine, struct i915_wa_list *wal) |
| { |
| if (IS_PVC_CT_STEP(engine->i915, STEP_A0, STEP_C0)) { |
| /* Wa_14014999345:pvc */ |
| wa_mcr_masked_en(wal, GEN10_CACHE_MODE_SS, DISABLE_ECC); |
| } |
| } |
| |
| /* |
| * The bspec performance guide has recommended MMIO tuning settings. These |
| * aren't truly "workarounds" but we want to program them with the same |
| * workaround infrastructure to ensure that they're automatically added to |
| * the GuC save/restore lists, re-applied at the right times, and checked for |
| * any conflicting programming requested by real workarounds. |
| * |
| * Programming settings should be added here only if their registers are not |
| * part of an engine's register state context. If a register is part of a |
| * context, then any tuning settings should be programmed in an appropriate |
| * function invoked by __intel_engine_init_ctx_wa(). |
| */ |
| static void |
| add_render_compute_tuning_settings(struct intel_gt *gt, |
| struct i915_wa_list *wal) |
| { |
| struct drm_i915_private *i915 = gt->i915; |
| |
| if (IS_GFX_GT_IP_RANGE(gt, IP_VER(12, 70), IP_VER(12, 74)) || IS_DG2(i915)) |
| wa_mcr_write_clr_set(wal, RT_CTRL, STACKID_CTRL, STACKID_CTRL_512); |
| |
| /* |
| * This tuning setting proves beneficial only on ATS-M designs; the |
| * default "age based" setting is optimal on regular DG2 and other |
| * platforms. |
| */ |
| if (INTEL_INFO(i915)->tuning_thread_rr_after_dep) |
| wa_mcr_masked_field_set(wal, GEN9_ROW_CHICKEN4, THREAD_EX_ARB_MODE, |
| THREAD_EX_ARB_MODE_RR_AFTER_DEP); |
| |
| if (GRAPHICS_VER(i915) == 12 && GRAPHICS_VER_FULL(i915) < IP_VER(12, 50)) |
| wa_write_clr(wal, GEN8_GARBCNTL, GEN12_BUS_HASH_CTL_BIT_EXC); |
| } |
| |
| /* |
| * The workarounds in this function apply to shared registers in |
| * the general render reset domain that aren't tied to a |
| * specific engine. Since all render+compute engines get reset |
| * together, and the contents of these registers are lost during |
| * the shared render domain reset, we'll define such workarounds |
| * here and then add them to just a single RCS or CCS engine's |
| * workaround list (whichever engine has the XXXX flag). |
| */ |
| static void |
| general_render_compute_wa_init(struct intel_engine_cs *engine, struct i915_wa_list *wal) |
| { |
| struct drm_i915_private *i915 = engine->i915; |
| struct intel_gt *gt = engine->gt; |
| |
| add_render_compute_tuning_settings(gt, wal); |
| |
| if (GRAPHICS_VER(i915) >= 11) { |
| /* This is not a Wa (although referred to as |
| * WaSetInidrectStateOverride in places), this allows |
| * applications that reference sampler states through |
| * the BindlessSamplerStateBaseAddress to have their |
| * border color relative to DynamicStateBaseAddress |
| * rather than BindlessSamplerStateBaseAddress. |
| * |
| * Otherwise SAMPLER_STATE border colors have to be |
| * copied in multiple heaps (DynamicStateBaseAddress & |
| * BindlessSamplerStateBaseAddress) |
| * |
| * BSpec: 46052 |
| */ |
| wa_mcr_masked_en(wal, |
| GEN10_SAMPLER_MODE, |
| GEN11_INDIRECT_STATE_BASE_ADDR_OVERRIDE); |
| } |
| |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_B0, STEP_FOREVER) || |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_B0, STEP_FOREVER) || |
| IS_GFX_GT_IP_RANGE(gt, IP_VER(12, 74), IP_VER(12, 74))) |
| /* Wa_14017856879 */ |
| wa_mcr_masked_en(wal, GEN9_ROW_CHICKEN3, MTL_DISABLE_FIX_FOR_EOT_FLUSH); |
| |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0)) |
| /* |
| * Wa_14017066071 |
| * Wa_14017654203 |
| */ |
| wa_mcr_masked_en(wal, GEN10_SAMPLER_MODE, |
| MTL_DISABLE_SAMPLER_SC_OOO); |
| |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0)) |
| /* Wa_22015279794 */ |
| wa_mcr_masked_en(wal, GEN10_CACHE_MODE_SS, |
| DISABLE_PREFETCH_INTO_IC); |
| |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0) || |
| IS_DG2(i915)) { |
| /* Wa_22013037850 */ |
| wa_mcr_write_or(wal, LSC_CHICKEN_BIT_0_UDW, |
| DISABLE_128B_EVICTION_COMMAND_UDW); |
| |
| /* Wa_18017747507 */ |
| wa_masked_en(wal, VFG_PREEMPTION_CHICKEN, POLYGON_TRIFAN_LINELOOP_DISABLE); |
| } |
| |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0) || |
| IS_PONTEVECCHIO(i915) || |
| IS_DG2(i915)) { |
| /* Wa_22014226127 */ |
| wa_mcr_write_or(wal, LSC_CHICKEN_BIT_0, DISABLE_D8_D16_COASLESCE); |
| } |
| |
| if (IS_PONTEVECCHIO(i915) || IS_DG2(i915)) { |
| /* Wa_14015227452:dg2,pvc */ |
| wa_mcr_masked_en(wal, GEN9_ROW_CHICKEN4, XEHP_DIS_BBL_SYSPIPE); |
| |
| /* Wa_16015675438:dg2,pvc */ |
| wa_masked_en(wal, FF_SLICE_CS_CHICKEN2, GEN12_PERF_FIX_BALANCING_CFE_DISABLE); |
| } |
| |
| if (IS_DG2(i915)) { |
| /* |
| * Wa_16011620976:dg2_g11 |
| * Wa_22015475538:dg2 |
| */ |
| wa_mcr_write_or(wal, LSC_CHICKEN_BIT_0_UDW, DIS_CHAIN_2XSIMD8); |
| |
| /* Wa_18028616096 */ |
| wa_mcr_write_or(wal, LSC_CHICKEN_BIT_0_UDW, UGM_FRAGMENT_THRESHOLD_TO_3); |
| } |
| |
| if (IS_DG2_G11(i915)) { |
| /* |
| * Wa_22012826095:dg2 |
| * Wa_22013059131:dg2 |
| */ |
| wa_mcr_write_clr_set(wal, LSC_CHICKEN_BIT_0_UDW, |
| MAXREQS_PER_BANK, |
| REG_FIELD_PREP(MAXREQS_PER_BANK, 2)); |
| |
| /* Wa_22013059131:dg2 */ |
| wa_mcr_write_or(wal, LSC_CHICKEN_BIT_0, |
| FORCE_1_SUB_MESSAGE_PER_FRAGMENT); |
| |
| /* |
| * Wa_22012654132 |
| * |
| * Note that register 0xE420 is write-only and cannot be read |
| * back for verification on DG2 (due to Wa_14012342262), so |
| * we need to explicitly skip the readback. |
| */ |
| wa_mcr_add(wal, GEN10_CACHE_MODE_SS, 0, |
| _MASKED_BIT_ENABLE(ENABLE_PREFETCH_INTO_IC), |
| 0 /* write-only, so skip validation */, |
| true); |
| } |
| |
| if (IS_XEHPSDV(i915)) { |
| /* Wa_1409954639 */ |
| wa_mcr_masked_en(wal, |
| GEN8_ROW_CHICKEN, |
| SYSTOLIC_DOP_CLOCK_GATING_DIS); |
| |
| /* Wa_1607196519 */ |
| wa_mcr_masked_en(wal, |
| GEN9_ROW_CHICKEN4, |
| GEN12_DISABLE_GRF_CLEAR); |
| |
| /* Wa_14010449647:xehpsdv */ |
| wa_mcr_masked_en(wal, GEN8_HALF_SLICE_CHICKEN1, |
| GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE); |
| } |
| } |
| |
| static void |
| engine_init_workarounds(struct intel_engine_cs *engine, struct i915_wa_list *wal) |
| { |
| if (GRAPHICS_VER(engine->i915) < 4) |
| return; |
| |
| engine_fake_wa_init(engine, wal); |
| |
| /* |
| * These are common workarounds that just need to applied |
| * to a single RCS/CCS engine's workaround list since |
| * they're reset as part of the general render domain reset. |
| */ |
| if (engine->flags & I915_ENGINE_FIRST_RENDER_COMPUTE) |
| general_render_compute_wa_init(engine, wal); |
| |
| if (engine->class == COMPUTE_CLASS) |
| ccs_engine_wa_init(engine, wal); |
| else if (engine->class == RENDER_CLASS) |
| rcs_engine_wa_init(engine, wal); |
| else |
| xcs_engine_wa_init(engine, wal); |
| } |
| |
| void intel_engine_init_workarounds(struct intel_engine_cs *engine) |
| { |
| struct i915_wa_list *wal = &engine->wa_list; |
| |
| wa_init_start(wal, engine->gt, "engine", engine->name); |
| engine_init_workarounds(engine, wal); |
| wa_init_finish(wal); |
| } |
| |
| void intel_engine_apply_workarounds(struct intel_engine_cs *engine) |
| { |
| wa_list_apply(&engine->wa_list); |
| } |
| |
| static const struct i915_range mcr_ranges_gen8[] = { |
| { .start = 0x5500, .end = 0x55ff }, |
| { .start = 0x7000, .end = 0x7fff }, |
| { .start = 0x9400, .end = 0x97ff }, |
| { .start = 0xb000, .end = 0xb3ff }, |
| { .start = 0xe000, .end = 0xe7ff }, |
| {}, |
| }; |
| |
| static const struct i915_range mcr_ranges_gen12[] = { |
| { .start = 0x8150, .end = 0x815f }, |
| { .start = 0x9520, .end = 0x955f }, |
| { .start = 0xb100, .end = 0xb3ff }, |
| { .start = 0xde80, .end = 0xe8ff }, |
| { .start = 0x24a00, .end = 0x24a7f }, |
| {}, |
| }; |
| |
| static const struct i915_range mcr_ranges_xehp[] = { |
| { .start = 0x4000, .end = 0x4aff }, |
| { .start = 0x5200, .end = 0x52ff }, |
| { .start = 0x5400, .end = 0x7fff }, |
| { .start = 0x8140, .end = 0x815f }, |
| { .start = 0x8c80, .end = 0x8dff }, |
| { .start = 0x94d0, .end = 0x955f }, |
| { .start = 0x9680, .end = 0x96ff }, |
| { .start = 0xb000, .end = 0xb3ff }, |
| { .start = 0xc800, .end = 0xcfff }, |
| { .start = 0xd800, .end = 0xd8ff }, |
| { .start = 0xdc00, .end = 0xffff }, |
| { .start = 0x17000, .end = 0x17fff }, |
| { .start = 0x24a00, .end = 0x24a7f }, |
| {}, |
| }; |
| |
| static bool mcr_range(struct drm_i915_private *i915, u32 offset) |
| { |
| const struct i915_range *mcr_ranges; |
| int i; |
| |
| if (GRAPHICS_VER_FULL(i915) >= IP_VER(12, 50)) |
| mcr_ranges = mcr_ranges_xehp; |
| else if (GRAPHICS_VER(i915) >= 12) |
| mcr_ranges = mcr_ranges_gen12; |
| else if (GRAPHICS_VER(i915) >= 8) |
| mcr_ranges = mcr_ranges_gen8; |
| else |
| return false; |
| |
| /* |
| * Registers in these ranges are affected by the MCR selector |
| * which only controls CPU initiated MMIO. Routing does not |
| * work for CS access so we cannot verify them on this path. |
| */ |
| for (i = 0; mcr_ranges[i].start; i++) |
| if (offset >= mcr_ranges[i].start && |
| offset <= mcr_ranges[i].end) |
| return true; |
| |
| return false; |
| } |
| |
| static int |
| wa_list_srm(struct i915_request *rq, |
| const struct i915_wa_list *wal, |
| struct i915_vma *vma) |
| { |
| struct drm_i915_private *i915 = rq->i915; |
| unsigned int i, count = 0; |
| const struct i915_wa *wa; |
| u32 srm, *cs; |
| |
| srm = MI_STORE_REGISTER_MEM | MI_SRM_LRM_GLOBAL_GTT; |
| if (GRAPHICS_VER(i915) >= 8) |
| srm++; |
| |
| for (i = 0, wa = wal->list; i < wal->count; i++, wa++) { |
| if (!mcr_range(i915, i915_mmio_reg_offset(wa->reg))) |
| count++; |
| } |
| |
| cs = intel_ring_begin(rq, 4 * count); |
| if (IS_ERR(cs)) |
| return PTR_ERR(cs); |
| |
| for (i = 0, wa = wal->list; i < wal->count; i++, wa++) { |
| u32 offset = i915_mmio_reg_offset(wa->reg); |
| |
| if (mcr_range(i915, offset)) |
| continue; |
| |
| *cs++ = srm; |
| *cs++ = offset; |
| *cs++ = i915_ggtt_offset(vma) + sizeof(u32) * i; |
| *cs++ = 0; |
| } |
| intel_ring_advance(rq, cs); |
| |
| return 0; |
| } |
| |
| static int engine_wa_list_verify(struct intel_context *ce, |
| const struct i915_wa_list * const wal, |
| const char *from) |
| { |
| const struct i915_wa *wa; |
| struct i915_request *rq; |
| struct i915_vma *vma; |
| struct i915_gem_ww_ctx ww; |
| unsigned int i; |
| u32 *results; |
| int err; |
| |
| if (!wal->count) |
| return 0; |
| |
| vma = __vm_create_scratch_for_read(&ce->engine->gt->ggtt->vm, |
| wal->count * sizeof(u32)); |
| if (IS_ERR(vma)) |
| return PTR_ERR(vma); |
| |
| intel_engine_pm_get(ce->engine); |
| i915_gem_ww_ctx_init(&ww, false); |
| retry: |
| err = i915_gem_object_lock(vma->obj, &ww); |
| if (err == 0) |
| err = intel_context_pin_ww(ce, &ww); |
| if (err) |
| goto err_pm; |
| |
| err = i915_vma_pin_ww(vma, &ww, 0, 0, |
| i915_vma_is_ggtt(vma) ? PIN_GLOBAL : PIN_USER); |
| if (err) |
| goto err_unpin; |
| |
| rq = i915_request_create(ce); |
| if (IS_ERR(rq)) { |
| err = PTR_ERR(rq); |
| goto err_vma; |
| } |
| |
| err = i915_vma_move_to_active(vma, rq, EXEC_OBJECT_WRITE); |
| if (err == 0) |
| err = wa_list_srm(rq, wal, vma); |
| |
| i915_request_get(rq); |
| if (err) |
| i915_request_set_error_once(rq, err); |
| i915_request_add(rq); |
| |
| if (err) |
| goto err_rq; |
| |
| if (i915_request_wait(rq, 0, HZ / 5) < 0) { |
| err = -ETIME; |
| goto err_rq; |
| } |
| |
| results = i915_gem_object_pin_map(vma->obj, I915_MAP_WB); |
| if (IS_ERR(results)) { |
| err = PTR_ERR(results); |
| goto err_rq; |
| } |
| |
| err = 0; |
| for (i = 0, wa = wal->list; i < wal->count; i++, wa++) { |
| if (mcr_range(rq->i915, i915_mmio_reg_offset(wa->reg))) |
| continue; |
| |
| if (!wa_verify(wal->gt, wa, results[i], wal->name, from)) |
| err = -ENXIO; |
| } |
| |
| i915_gem_object_unpin_map(vma->obj); |
| |
| err_rq: |
| i915_request_put(rq); |
| err_vma: |
| i915_vma_unpin(vma); |
| err_unpin: |
| intel_context_unpin(ce); |
| err_pm: |
| if (err == -EDEADLK) { |
| err = i915_gem_ww_ctx_backoff(&ww); |
| if (!err) |
| goto retry; |
| } |
| i915_gem_ww_ctx_fini(&ww); |
| intel_engine_pm_put(ce->engine); |
| i915_vma_put(vma); |
| return err; |
| } |
| |
| int intel_engine_verify_workarounds(struct intel_engine_cs *engine, |
| const char *from) |
| { |
| return engine_wa_list_verify(engine->kernel_context, |
| &engine->wa_list, |
| from); |
| } |
| |
| #if IS_ENABLED(CONFIG_DRM_I915_SELFTEST) |
| #include "selftest_workarounds.c" |
| #endif |