| # |
| # For a description of the syntax of this configuration file, |
| # see Documentation/kbuild/kconfig-language.txt. |
| # |
| |
| menu "Firmware Drivers" |
| |
| config ARM_SCMI_PROTOCOL |
| bool "ARM System Control and Management Interface (SCMI) Message Protocol" |
| depends on ARM || ARM64 || COMPILE_TEST |
| depends on MAILBOX |
| help |
| ARM System Control and Management Interface (SCMI) protocol is a |
| set of operating system-independent software interfaces that are |
| used in system management. SCMI is extensible and currently provides |
| interfaces for: Discovery and self-description of the interfaces |
| it supports, Power domain management which is the ability to place |
| a given device or domain into the various power-saving states that |
| it supports, Performance management which is the ability to control |
| the performance of a domain that is composed of compute engines |
| such as application processors and other accelerators, Clock |
| management which is the ability to set and inquire rates on platform |
| managed clocks and Sensor management which is the ability to read |
| sensor data, and be notified of sensor value. |
| |
| This protocol library provides interface for all the client drivers |
| making use of the features offered by the SCMI. |
| |
| config ARM_SCMI_POWER_DOMAIN |
| tristate "SCMI power domain driver" |
| depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF) |
| default y |
| select PM_GENERIC_DOMAINS if PM |
| help |
| This enables support for the SCMI power domains which can be |
| enabled or disabled via the SCP firmware |
| |
| This driver can also be built as a module. If so, the module |
| will be called scmi_pm_domain. Note this may needed early in boot |
| before rootfs may be available. |
| |
| config ARM_SCPI_PROTOCOL |
| tristate "ARM System Control and Power Interface (SCPI) Message Protocol" |
| depends on ARM || ARM64 || COMPILE_TEST |
| depends on MAILBOX |
| help |
| System Control and Power Interface (SCPI) Message Protocol is |
| defined for the purpose of communication between the Application |
| Cores(AP) and the System Control Processor(SCP). The MHU peripheral |
| provides a mechanism for inter-processor communication between SCP |
| and AP. |
| |
| SCP controls most of the power managament on the Application |
| Processors. It offers control and management of: the core/cluster |
| power states, various power domain DVFS including the core/cluster, |
| certain system clocks configuration, thermal sensors and many |
| others. |
| |
| This protocol library provides interface for all the client drivers |
| making use of the features offered by the SCP. |
| |
| config ARM_SCPI_POWER_DOMAIN |
| tristate "SCPI power domain driver" |
| depends on ARM_SCPI_PROTOCOL || (COMPILE_TEST && OF) |
| default y |
| select PM_GENERIC_DOMAINS if PM |
| help |
| This enables support for the SCPI power domains which can be |
| enabled or disabled via the SCP firmware |
| |
| config ARM_SDE_INTERFACE |
| bool "ARM Software Delegated Exception Interface (SDEI)" |
| depends on ARM64 |
| help |
| The Software Delegated Exception Interface (SDEI) is an ARM |
| standard for registering callbacks from the platform firmware |
| into the OS. This is typically used to implement RAS notifications. |
| |
| config EDD |
| tristate "BIOS Enhanced Disk Drive calls determine boot disk" |
| depends on X86 |
| help |
| Say Y or M here if you want to enable BIOS Enhanced Disk Drive |
| Services real mode BIOS calls to determine which disk |
| BIOS tries boot from. This information is then exported via sysfs. |
| |
| This option is experimental and is known to fail to boot on some |
| obscure configurations. Most disk controller BIOS vendors do |
| not yet implement this feature. |
| |
| config EDD_OFF |
| bool "Sets default behavior for EDD detection to off" |
| depends on EDD |
| default n |
| help |
| Say Y if you want EDD disabled by default, even though it is compiled into the |
| kernel. Say N if you want EDD enabled by default. EDD can be dynamically set |
| using the kernel parameter 'edd={on|skipmbr|off}'. |
| |
| config FIRMWARE_MEMMAP |
| bool "Add firmware-provided memory map to sysfs" if EXPERT |
| default X86 |
| help |
| Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap. |
| That memory map is used for example by kexec to set up parameter area |
| for the next kernel, but can also be used for debugging purposes. |
| |
| See also Documentation/ABI/testing/sysfs-firmware-memmap. |
| |
| config EFI_PCDP |
| bool "Console device selection via EFI PCDP or HCDP table" |
| depends on ACPI && EFI && IA64 |
| default y if IA64 |
| help |
| If your firmware supplies the PCDP table, and you want to |
| automatically use the primary console device it describes |
| as the Linux console, say Y here. |
| |
| If your firmware supplies the HCDP table, and you want to |
| use the first serial port it describes as the Linux console, |
| say Y here. If your EFI ConOut path contains only a UART |
| device, it will become the console automatically. Otherwise, |
| you must specify the "console=hcdp" kernel boot argument. |
| |
| Neither the PCDP nor the HCDP affects naming of serial devices, |
| so a serial console may be /dev/ttyS0, /dev/ttyS1, etc, depending |
| on how the driver discovers devices. |
| |
| You must also enable the appropriate drivers (serial, VGA, etc.) |
| |
| See DIG64_HCDPv20_042804.pdf available from |
| <http://www.dig64.org/specifications/> |
| |
| config DMIID |
| bool "Export DMI identification via sysfs to userspace" |
| depends on DMI |
| default y |
| help |
| Say Y here if you want to query SMBIOS/DMI system identification |
| information from userspace through /sys/class/dmi/id/ or if you want |
| DMI-based module auto-loading. |
| |
| config DMI_SYSFS |
| tristate "DMI table support in sysfs" |
| depends on SYSFS && DMI |
| default n |
| help |
| Say Y or M here to enable the exporting of the raw DMI table |
| data via sysfs. This is useful for consuming the data without |
| requiring any access to /dev/mem at all. Tables are found |
| under /sys/firmware/dmi when this option is enabled and |
| loaded. |
| |
| config DMI_SCAN_MACHINE_NON_EFI_FALLBACK |
| bool |
| |
| config ISCSI_IBFT_FIND |
| bool "iSCSI Boot Firmware Table Attributes" |
| depends on X86 && ACPI |
| default n |
| help |
| This option enables the kernel to find the region of memory |
| in which the ISCSI Boot Firmware Table (iBFT) resides. This |
| is necessary for iSCSI Boot Firmware Table Attributes module to work |
| properly. |
| |
| config ISCSI_IBFT |
| tristate "iSCSI Boot Firmware Table Attributes module" |
| select ISCSI_BOOT_SYSFS |
| depends on ISCSI_IBFT_FIND && SCSI && SCSI_LOWLEVEL |
| default n |
| help |
| This option enables support for detection and exposing of iSCSI |
| Boot Firmware Table (iBFT) via sysfs to userspace. If you wish to |
| detect iSCSI boot parameters dynamically during system boot, say Y. |
| Otherwise, say N. |
| |
| config RASPBERRYPI_FIRMWARE |
| tristate "Raspberry Pi Firmware Driver" |
| depends on BCM2835_MBOX |
| help |
| This option enables support for communicating with the firmware on the |
| Raspberry Pi. |
| |
| config FW_CFG_SYSFS |
| tristate "QEMU fw_cfg device support in sysfs" |
| depends on SYSFS && (ARM || ARM64 || PPC_PMAC || SPARC || X86) |
| depends on HAS_IOPORT_MAP |
| default n |
| help |
| Say Y or M here to enable the exporting of the QEMU firmware |
| configuration (fw_cfg) file entries via sysfs. Entries are |
| found under /sys/firmware/fw_cfg when this option is enabled |
| and loaded. |
| |
| config FW_CFG_SYSFS_CMDLINE |
| bool "QEMU fw_cfg device parameter parsing" |
| depends on FW_CFG_SYSFS |
| help |
| Allow the qemu_fw_cfg device to be initialized via the kernel |
| command line or using a module parameter. |
| WARNING: Using incorrect parameters (base address in particular) |
| may crash your system. |
| |
| config INTEL_STRATIX10_SERVICE |
| tristate "Intel Stratix10 Service Layer" |
| depends on ARCH_STRATIX10 && HAVE_ARM_SMCCC |
| default n |
| help |
| Intel Stratix10 service layer runs at privileged exception level, |
| interfaces with the service providers (FPGA manager is one of them) |
| and manages secure monitor call to communicate with secure monitor |
| software at secure monitor exception level. |
| |
| Say Y here if you want Stratix10 service layer support. |
| |
| config QCOM_SCM |
| bool |
| depends on ARM || ARM64 |
| select RESET_CONTROLLER |
| |
| config QCOM_SCM_32 |
| def_bool y |
| depends on QCOM_SCM && ARM |
| |
| config QCOM_SCM_64 |
| def_bool y |
| depends on QCOM_SCM && ARM64 |
| |
| config QCOM_SCM_DOWNLOAD_MODE_DEFAULT |
| bool "Qualcomm download mode enabled by default" |
| depends on QCOM_SCM |
| help |
| A device with "download mode" enabled will upon an unexpected |
| warm-restart enter a special debug mode that allows the user to |
| "download" memory content over USB for offline postmortem analysis. |
| The feature can be enabled/disabled on the kernel command line. |
| |
| Say Y here to enable "download mode" by default. |
| |
| config TI_SCI_PROTOCOL |
| tristate "TI System Control Interface (TISCI) Message Protocol" |
| depends on TI_MESSAGE_MANAGER |
| help |
| TI System Control Interface (TISCI) Message Protocol is used to manage |
| compute systems such as ARM, DSP etc with the system controller in |
| complex System on Chip(SoC) such as those found on certain keystone |
| generation SoC from TI. |
| |
| System controller provides various facilities including power |
| management function support. |
| |
| This protocol library is used by client drivers to use the features |
| provided by the system controller. |
| |
| config TRUSTED_FOUNDATIONS |
| bool "Trusted Foundations secure monitor support" |
| depends on ARM |
| help |
| Some devices (including most early Tegra-based consumer devices on |
| the market) are booted with the Trusted Foundations secure monitor |
| active, requiring some core operations to be performed by the secure |
| monitor instead of the kernel. |
| |
| This option allows the kernel to invoke the secure monitor whenever |
| required on devices using Trusted Foundations. See the functions and |
| comments in linux/firmware/trusted_foundations.h or the device tree |
| bindings for "tlm,trusted-foundations" for details on how to use it. |
| |
| Choose N if you don't know what this is about. |
| |
| config HAVE_ARM_SMCCC |
| bool |
| |
| source "drivers/firmware/psci/Kconfig" |
| source "drivers/firmware/broadcom/Kconfig" |
| source "drivers/firmware/google/Kconfig" |
| source "drivers/firmware/efi/Kconfig" |
| source "drivers/firmware/imx/Kconfig" |
| source "drivers/firmware/meson/Kconfig" |
| source "drivers/firmware/tegra/Kconfig" |
| source "drivers/firmware/xilinx/Kconfig" |
| |
| endmenu |
