| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * maxim_thermocouple.c - Support for Maxim thermocouple chips |
| * |
| * Copyright (C) 2016-2018 Matt Ranostay |
| * Author: <matt.ranostay@konsulko.com> |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/err.h> |
| #include <linux/spi/spi.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/trigger.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/triggered_buffer.h> |
| #include <linux/iio/trigger_consumer.h> |
| |
| #define MAXIM_THERMOCOUPLE_DRV_NAME "maxim_thermocouple" |
| |
| enum { |
| MAX6675, |
| MAX31855, |
| MAX31855K, |
| MAX31855J, |
| MAX31855N, |
| MAX31855S, |
| MAX31855T, |
| MAX31855E, |
| MAX31855R, |
| }; |
| |
| static const char maxim_tc_types[] = { |
| 'K', '?', 'K', 'J', 'N', 'S', 'T', 'E', 'R' |
| }; |
| |
| static const struct iio_chan_spec max6675_channels[] = { |
| { /* thermocouple temperature */ |
| .type = IIO_TEMP, |
| .info_mask_separate = |
| BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) | |
| BIT(IIO_CHAN_INFO_THERMOCOUPLE_TYPE), |
| .scan_index = 0, |
| .scan_type = { |
| .sign = 's', |
| .realbits = 13, |
| .storagebits = 16, |
| .shift = 3, |
| .endianness = IIO_BE, |
| }, |
| }, |
| IIO_CHAN_SOFT_TIMESTAMP(1), |
| }; |
| |
| static const struct iio_chan_spec max31855_channels[] = { |
| { /* thermocouple temperature */ |
| .type = IIO_TEMP, |
| .address = 2, |
| .info_mask_separate = |
| BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) | |
| BIT(IIO_CHAN_INFO_THERMOCOUPLE_TYPE), |
| .scan_index = 0, |
| .scan_type = { |
| .sign = 's', |
| .realbits = 14, |
| .storagebits = 16, |
| .shift = 2, |
| .endianness = IIO_BE, |
| }, |
| }, |
| { /* cold junction temperature */ |
| .type = IIO_TEMP, |
| .address = 0, |
| .channel2 = IIO_MOD_TEMP_AMBIENT, |
| .modified = 1, |
| .info_mask_separate = |
| BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), |
| .scan_index = 1, |
| .scan_type = { |
| .sign = 's', |
| .realbits = 12, |
| .storagebits = 16, |
| .shift = 4, |
| .endianness = IIO_BE, |
| }, |
| }, |
| IIO_CHAN_SOFT_TIMESTAMP(2), |
| }; |
| |
| static const unsigned long max31855_scan_masks[] = {0x3, 0}; |
| |
| struct maxim_thermocouple_chip { |
| const struct iio_chan_spec *channels; |
| const unsigned long *scan_masks; |
| u8 num_channels; |
| u8 read_size; |
| |
| /* bit-check for valid input */ |
| u32 status_bit; |
| }; |
| |
| static const struct maxim_thermocouple_chip maxim_thermocouple_chips[] = { |
| [MAX6675] = { |
| .channels = max6675_channels, |
| .num_channels = ARRAY_SIZE(max6675_channels), |
| .read_size = 2, |
| .status_bit = BIT(2), |
| }, |
| [MAX31855] = { |
| .channels = max31855_channels, |
| .num_channels = ARRAY_SIZE(max31855_channels), |
| .read_size = 4, |
| .scan_masks = max31855_scan_masks, |
| .status_bit = BIT(16), |
| }, |
| }; |
| |
| struct maxim_thermocouple_data { |
| struct spi_device *spi; |
| const struct maxim_thermocouple_chip *chip; |
| |
| u8 buffer[16] ____cacheline_aligned; |
| char tc_type; |
| }; |
| |
| static int maxim_thermocouple_read(struct maxim_thermocouple_data *data, |
| struct iio_chan_spec const *chan, int *val) |
| { |
| unsigned int storage_bytes = data->chip->read_size; |
| unsigned int shift = chan->scan_type.shift + (chan->address * 8); |
| __be16 buf16; |
| __be32 buf32; |
| int ret; |
| |
| switch (storage_bytes) { |
| case 2: |
| ret = spi_read(data->spi, (void *)&buf16, storage_bytes); |
| *val = be16_to_cpu(buf16); |
| break; |
| case 4: |
| ret = spi_read(data->spi, (void *)&buf32, storage_bytes); |
| *val = be32_to_cpu(buf32); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| if (ret) |
| return ret; |
| |
| /* check to be sure this is a valid reading */ |
| if (*val & data->chip->status_bit) |
| return -EINVAL; |
| |
| *val = sign_extend32(*val >> shift, chan->scan_type.realbits - 1); |
| |
| return 0; |
| } |
| |
| static irqreturn_t maxim_thermocouple_trigger_handler(int irq, void *private) |
| { |
| struct iio_poll_func *pf = private; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct maxim_thermocouple_data *data = iio_priv(indio_dev); |
| int ret; |
| |
| ret = spi_read(data->spi, data->buffer, data->chip->read_size); |
| if (!ret) { |
| iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, |
| iio_get_time_ns(indio_dev)); |
| } |
| |
| iio_trigger_notify_done(indio_dev->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int maxim_thermocouple_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct maxim_thermocouple_data *data = iio_priv(indio_dev); |
| int ret = -EINVAL; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret) |
| return ret; |
| |
| ret = maxim_thermocouple_read(data, chan, val); |
| iio_device_release_direct_mode(indio_dev); |
| |
| if (!ret) |
| return IIO_VAL_INT; |
| |
| break; |
| case IIO_CHAN_INFO_SCALE: |
| switch (chan->channel2) { |
| case IIO_MOD_TEMP_AMBIENT: |
| *val = 62; |
| *val2 = 500000; /* 1000 * 0.0625 */ |
| ret = IIO_VAL_INT_PLUS_MICRO; |
| break; |
| default: |
| *val = 250; /* 1000 * 0.25 */ |
| ret = IIO_VAL_INT; |
| } |
| break; |
| case IIO_CHAN_INFO_THERMOCOUPLE_TYPE: |
| *val = data->tc_type; |
| ret = IIO_VAL_CHAR; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static const struct iio_info maxim_thermocouple_info = { |
| .read_raw = maxim_thermocouple_read_raw, |
| }; |
| |
| static int maxim_thermocouple_probe(struct spi_device *spi) |
| { |
| const struct spi_device_id *id = spi_get_device_id(spi); |
| struct iio_dev *indio_dev; |
| struct maxim_thermocouple_data *data; |
| const int chip_type = (id->driver_data == MAX6675) ? MAX6675 : MAX31855; |
| const struct maxim_thermocouple_chip *chip = |
| &maxim_thermocouple_chips[chip_type]; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| indio_dev->info = &maxim_thermocouple_info; |
| indio_dev->name = MAXIM_THERMOCOUPLE_DRV_NAME; |
| indio_dev->channels = chip->channels; |
| indio_dev->available_scan_masks = chip->scan_masks; |
| indio_dev->num_channels = chip->num_channels; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| data = iio_priv(indio_dev); |
| data->spi = spi; |
| data->chip = chip; |
| data->tc_type = maxim_tc_types[id->driver_data]; |
| |
| ret = devm_iio_triggered_buffer_setup(&spi->dev, |
| indio_dev, NULL, |
| maxim_thermocouple_trigger_handler, NULL); |
| if (ret) |
| return ret; |
| |
| if (id->driver_data == MAX31855) |
| dev_warn(&spi->dev, "generic max31855 ID is deprecated\nplease use more specific part type"); |
| |
| return devm_iio_device_register(&spi->dev, indio_dev); |
| } |
| |
| static const struct spi_device_id maxim_thermocouple_id[] = { |
| {"max6675", MAX6675}, |
| {"max31855", MAX31855}, |
| {"max31855k", MAX31855K}, |
| {"max31855j", MAX31855J}, |
| {"max31855n", MAX31855N}, |
| {"max31855s", MAX31855S}, |
| {"max31855t", MAX31855T}, |
| {"max31855e", MAX31855E}, |
| {"max31855r", MAX31855R}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(spi, maxim_thermocouple_id); |
| |
| static const struct of_device_id maxim_thermocouple_of_match[] = { |
| { .compatible = "maxim,max6675" }, |
| { .compatible = "maxim,max31855" }, |
| { .compatible = "maxim,max31855k" }, |
| { .compatible = "maxim,max31855j" }, |
| { .compatible = "maxim,max31855n" }, |
| { .compatible = "maxim,max31855s" }, |
| { .compatible = "maxim,max31855t" }, |
| { .compatible = "maxim,max31855e" }, |
| { .compatible = "maxim,max31855r" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, maxim_thermocouple_of_match); |
| |
| static struct spi_driver maxim_thermocouple_driver = { |
| .driver = { |
| .name = MAXIM_THERMOCOUPLE_DRV_NAME, |
| .of_match_table = maxim_thermocouple_of_match, |
| }, |
| .probe = maxim_thermocouple_probe, |
| .id_table = maxim_thermocouple_id, |
| }; |
| module_spi_driver(maxim_thermocouple_driver); |
| |
| MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>"); |
| MODULE_DESCRIPTION("Maxim thermocouple sensors"); |
| MODULE_LICENSE("GPL"); |