| // SPDX-License-Identifier: GPL-2.0+ |
| |
| #include <linux/bitops.h> |
| #include <linux/bitfield.h> |
| #include <linux/util_macros.h> |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/mod_devicetable.h> |
| |
| /* Register */ |
| #define RTQ2208_REG_GLOBAL_INT1 0x12 |
| #define RTQ2208_REG_FLT_RECORDBUCK_CB 0x18 |
| #define RTQ2208_REG_GLOBAL_INT1_MASK 0x1D |
| #define RTQ2208_REG_FLT_MASKBUCK_CB 0x1F |
| #define RTQ2208_REG_BUCK_C_CFG0 0x32 |
| #define RTQ2208_REG_BUCK_B_CFG0 0x42 |
| #define RTQ2208_REG_BUCK_A_CFG0 0x52 |
| #define RTQ2208_REG_BUCK_D_CFG0 0x62 |
| #define RTQ2208_REG_BUCK_G_CFG0 0x72 |
| #define RTQ2208_REG_BUCK_F_CFG0 0x82 |
| #define RTQ2208_REG_BUCK_E_CFG0 0x92 |
| #define RTQ2208_REG_BUCK_H_CFG0 0xA2 |
| #define RTQ2208_REG_LDO1_CFG 0xB1 |
| #define RTQ2208_REG_LDO2_CFG 0xC1 |
| |
| /* Mask */ |
| #define RTQ2208_BUCK_NR_MTP_SEL_MASK GENMASK(7, 0) |
| #define RTQ2208_BUCK_EN_NR_MTP_SEL0_MASK BIT(0) |
| #define RTQ2208_BUCK_EN_NR_MTP_SEL1_MASK BIT(1) |
| #define RTQ2208_BUCK_RSPUP_MASK GENMASK(6, 4) |
| #define RTQ2208_BUCK_RSPDN_MASK GENMASK(2, 0) |
| #define RTQ2208_BUCK_NRMODE_MASK BIT(5) |
| #define RTQ2208_BUCK_STRMODE_MASK BIT(5) |
| #define RTQ2208_BUCK_EN_STR_MASK BIT(0) |
| #define RTQ2208_LDO_EN_STR_MASK BIT(7) |
| #define RTQ2208_EN_DIS_MASK BIT(0) |
| #define RTQ2208_BUCK_RAMP_SEL_MASK GENMASK(2, 0) |
| #define RTQ2208_HD_INT_MASK BIT(0) |
| |
| /* Size */ |
| #define RTQ2208_VOUT_MAXNUM 256 |
| #define RTQ2208_BUCK_NUM_IRQ_REGS 5 |
| #define RTQ2208_STS_NUM_IRQ_REGS 2 |
| |
| /* Value */ |
| #define RTQ2208_RAMP_VALUE_MIN_uV 500 |
| #define RTQ2208_RAMP_VALUE_MAX_uV 64000 |
| |
| #define RTQ2208_BUCK_MASK(uv_irq, ov_irq) (1 << ((uv_irq) % 8) | 1 << ((ov_irq) % 8)) |
| |
| enum { |
| RTQ2208_BUCK_B = 0, |
| RTQ2208_BUCK_C, |
| RTQ2208_BUCK_D, |
| RTQ2208_BUCK_A, |
| RTQ2208_BUCK_F, |
| RTQ2208_BUCK_G, |
| RTQ2208_BUCK_H, |
| RTQ2208_BUCK_E, |
| RTQ2208_LDO2, |
| RTQ2208_LDO1, |
| RTQ2208_LDO_MAX, |
| }; |
| |
| enum { |
| RTQ2208_AUTO_MODE = 0, |
| RTQ2208_FCCM, |
| }; |
| |
| struct rtq2208_regulator_desc { |
| struct regulator_desc desc; |
| unsigned int mtp_sel_reg; |
| unsigned int mtp_sel_mask; |
| unsigned int mode_reg; |
| unsigned int mode_mask; |
| unsigned int suspend_config_reg; |
| unsigned int suspend_enable_mask; |
| unsigned int suspend_mode_mask; |
| }; |
| |
| struct rtq2208_rdev_map { |
| struct regulator_dev *rdev[RTQ2208_LDO_MAX]; |
| struct regmap *regmap; |
| struct device *dev; |
| }; |
| |
| /* set Normal Auto/FCCM mode */ |
| static int rtq2208_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| { |
| const struct rtq2208_regulator_desc *rdesc = |
| (const struct rtq2208_regulator_desc *)rdev->desc; |
| unsigned int val, shift; |
| |
| switch (mode) { |
| case REGULATOR_MODE_NORMAL: |
| val = RTQ2208_AUTO_MODE; |
| break; |
| case REGULATOR_MODE_FAST: |
| val = RTQ2208_FCCM; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| shift = ffs(rdesc->mode_mask) - 1; |
| return regmap_update_bits(rdev->regmap, rdesc->mode_reg, |
| rdesc->mode_mask, val << shift); |
| } |
| |
| static unsigned int rtq2208_get_mode(struct regulator_dev *rdev) |
| { |
| const struct rtq2208_regulator_desc *rdesc = |
| (const struct rtq2208_regulator_desc *)rdev->desc; |
| unsigned int mode_val; |
| int ret; |
| |
| ret = regmap_read(rdev->regmap, rdesc->mode_reg, &mode_val); |
| if (ret) |
| return REGULATOR_MODE_INVALID; |
| |
| return (mode_val & rdesc->mode_mask) ? REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL; |
| } |
| |
| static int rtq2208_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) |
| { |
| const struct regulator_desc *desc = rdev->desc; |
| unsigned int sel = 0, val; |
| |
| ramp_delay = max(ramp_delay, RTQ2208_RAMP_VALUE_MIN_uV); |
| ramp_delay = min(ramp_delay, RTQ2208_RAMP_VALUE_MAX_uV); |
| |
| ramp_delay /= RTQ2208_RAMP_VALUE_MIN_uV; |
| |
| /* |
| * fls(ramp_delay) - 1: doing LSB shift, let it starts from 0 |
| * |
| * RTQ2208_BUCK_RAMP_SEL_MASK - sel: doing descending order shifting. |
| * Because the relation of seleltion and value is like that |
| * |
| * seletion: value |
| * 000: 64mv |
| * 001: 32mv |
| * ... |
| * 111: 0.5mv |
| * |
| * For example, if I would like to select 64mv, the fls(ramp_delay) - 1 will be 0b111, |
| * and I need to use 0b111 - sel to do the shifting |
| */ |
| |
| sel = fls(ramp_delay) - 1; |
| sel = RTQ2208_BUCK_RAMP_SEL_MASK - sel; |
| |
| val = FIELD_PREP(RTQ2208_BUCK_RSPUP_MASK, sel) | FIELD_PREP(RTQ2208_BUCK_RSPDN_MASK, sel); |
| |
| return regmap_update_bits(rdev->regmap, desc->ramp_reg, |
| RTQ2208_BUCK_RSPUP_MASK | RTQ2208_BUCK_RSPDN_MASK, val); |
| } |
| |
| static int rtq2208_set_suspend_enable(struct regulator_dev *rdev) |
| { |
| const struct rtq2208_regulator_desc *rdesc = |
| (const struct rtq2208_regulator_desc *)rdev->desc; |
| |
| return regmap_set_bits(rdev->regmap, rdesc->suspend_config_reg, rdesc->suspend_enable_mask); |
| } |
| |
| static int rtq2208_set_suspend_disable(struct regulator_dev *rdev) |
| { |
| const struct rtq2208_regulator_desc *rdesc = |
| (const struct rtq2208_regulator_desc *)rdev->desc; |
| |
| return regmap_update_bits(rdev->regmap, rdesc->suspend_config_reg, rdesc->suspend_enable_mask, 0); |
| } |
| |
| static int rtq2208_set_suspend_mode(struct regulator_dev *rdev, unsigned int mode) |
| { |
| const struct rtq2208_regulator_desc *rdesc = |
| (const struct rtq2208_regulator_desc *)rdev->desc; |
| unsigned int val, shift; |
| |
| switch (mode) { |
| case REGULATOR_MODE_NORMAL: |
| val = RTQ2208_AUTO_MODE; |
| break; |
| case REGULATOR_MODE_FAST: |
| val = RTQ2208_FCCM; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| shift = ffs(rdesc->suspend_mode_mask) - 1; |
| |
| return regmap_update_bits(rdev->regmap, rdesc->suspend_config_reg, |
| rdesc->suspend_mode_mask, val << shift); |
| } |
| |
| static const struct regulator_ops rtq2208_regulator_buck_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .list_voltage = regulator_list_voltage_linear_range, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_mode = rtq2208_set_mode, |
| .get_mode = rtq2208_get_mode, |
| .set_ramp_delay = rtq2208_set_ramp_delay, |
| .set_active_discharge = regulator_set_active_discharge_regmap, |
| .set_suspend_enable = rtq2208_set_suspend_enable, |
| .set_suspend_disable = rtq2208_set_suspend_disable, |
| .set_suspend_mode = rtq2208_set_suspend_mode, |
| }; |
| |
| static const struct regulator_ops rtq2208_regulator_ldo_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .set_active_discharge = regulator_set_active_discharge_regmap, |
| .set_suspend_enable = rtq2208_set_suspend_enable, |
| .set_suspend_disable = rtq2208_set_suspend_disable, |
| }; |
| |
| static unsigned int rtq2208_of_map_mode(unsigned int mode) |
| { |
| switch (mode) { |
| case RTQ2208_AUTO_MODE: |
| return REGULATOR_MODE_NORMAL; |
| case RTQ2208_FCCM: |
| return REGULATOR_MODE_FAST; |
| default: |
| return REGULATOR_MODE_INVALID; |
| } |
| } |
| |
| static int rtq2208_init_irq_mask(struct rtq2208_rdev_map *rdev_map, unsigned int *buck_masks) |
| { |
| unsigned char buck_clr_masks[5] = {0x33, 0x33, 0x33, 0x33, 0x33}, |
| sts_clr_masks[2] = {0xE7, 0xF7}, sts_masks[2] = {0xE6, 0xF6}; |
| int ret; |
| |
| /* write clear all buck irq once */ |
| ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_FLT_RECORDBUCK_CB, buck_clr_masks, 5); |
| if (ret) |
| return dev_err_probe(rdev_map->dev, ret, "Failed to clr buck irqs\n"); |
| |
| /* write clear general irq once */ |
| ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_GLOBAL_INT1, sts_clr_masks, 2); |
| if (ret) |
| return dev_err_probe(rdev_map->dev, ret, "Failed to clr general irqs\n"); |
| |
| /* unmask buck ov/uv irq */ |
| ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_FLT_MASKBUCK_CB, buck_masks, 5); |
| if (ret) |
| return dev_err_probe(rdev_map->dev, ret, "Failed to unmask buck irqs\n"); |
| |
| /* unmask needed general irq */ |
| return regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_GLOBAL_INT1_MASK, sts_masks, 2); |
| } |
| |
| static irqreturn_t rtq2208_irq_handler(int irqno, void *devid) |
| { |
| unsigned char buck_flags[RTQ2208_BUCK_NUM_IRQ_REGS], sts_flags[RTQ2208_STS_NUM_IRQ_REGS]; |
| int ret = 0, i, uv_bit, ov_bit; |
| struct rtq2208_rdev_map *rdev_map = devid; |
| struct regulator_dev *rdev; |
| |
| if (!rdev_map) |
| return IRQ_NONE; |
| |
| /* read irq event */ |
| ret = regmap_bulk_read(rdev_map->regmap, RTQ2208_REG_FLT_RECORDBUCK_CB, |
| buck_flags, ARRAY_SIZE(buck_flags)); |
| if (ret) |
| return IRQ_NONE; |
| |
| ret = regmap_bulk_read(rdev_map->regmap, RTQ2208_REG_GLOBAL_INT1, |
| sts_flags, ARRAY_SIZE(sts_flags)); |
| if (ret) |
| return IRQ_NONE; |
| |
| /* clear irq event */ |
| ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_FLT_RECORDBUCK_CB, |
| buck_flags, ARRAY_SIZE(buck_flags)); |
| if (ret) |
| return IRQ_NONE; |
| |
| ret = regmap_bulk_write(rdev_map->regmap, RTQ2208_REG_GLOBAL_INT1, |
| sts_flags, ARRAY_SIZE(sts_flags)); |
| if (ret) |
| return IRQ_NONE; |
| |
| for (i = 0; i < RTQ2208_LDO_MAX; i++) { |
| if (!rdev_map->rdev[i]) |
| continue; |
| |
| rdev = rdev_map->rdev[i]; |
| /* uv irq */ |
| uv_bit = (i & 1) ? 4 : 0; |
| if (buck_flags[i >> 1] & (1 << uv_bit)) |
| regulator_notifier_call_chain(rdev, |
| REGULATOR_EVENT_UNDER_VOLTAGE, NULL); |
| /* ov irq */ |
| ov_bit = uv_bit + 1; |
| if (buck_flags[i >> 1] & (1 << ov_bit)) |
| regulator_notifier_call_chain(rdev, |
| REGULATOR_EVENT_REGULATION_OUT, NULL); |
| |
| /* hd irq */ |
| if (sts_flags[1] & RTQ2208_HD_INT_MASK) |
| regulator_notifier_call_chain(rdev, |
| REGULATOR_EVENT_OVER_TEMP, NULL); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| #define RTQ2208_REGULATOR_INFO(_name, _base) \ |
| { \ |
| .name = #_name, \ |
| .base = _base, \ |
| } |
| #define BUCK_RG_BASE(_id) RTQ2208_REG_BUCK_##_id##_CFG0 |
| #define BUCK_RG_SHIFT(_base, _shift) (_base + _shift) |
| #define LDO_RG_BASE(_id) RTQ2208_REG_LDO##_id##_CFG |
| #define LDO_RG_SHIFT(_base, _shift) (_base + _shift) |
| #define VSEL_SHIFT(_sel) (_sel ? 3 : 1) |
| #define MTP_SEL_MASK(_sel) RTQ2208_BUCK_EN_NR_MTP_SEL##_sel##_MASK |
| |
| static const struct linear_range rtq2208_vout_range[] = { |
| REGULATOR_LINEAR_RANGE(400000, 0, 180, 5000), |
| REGULATOR_LINEAR_RANGE(1310000, 181, 255, 10000), |
| }; |
| |
| static int rtq2208_of_get_fixed_voltage(struct device *dev, |
| struct of_regulator_match *rtq2208_ldo_match, int n_fixed) |
| { |
| struct device_node *np; |
| struct of_regulator_match *match; |
| struct rtq2208_regulator_desc *rdesc; |
| struct regulator_init_data *init_data; |
| int ret, i; |
| |
| if (!dev->of_node) |
| return -ENODEV; |
| |
| np = of_get_child_by_name(dev->of_node, "regulators"); |
| if (!np) |
| np = dev->of_node; |
| |
| ret = of_regulator_match(dev, np, rtq2208_ldo_match, n_fixed); |
| |
| of_node_put(np); |
| |
| if (ret < 0) |
| return ret; |
| |
| for (i = 0; i < n_fixed; i++) { |
| match = rtq2208_ldo_match + i; |
| init_data = match->init_data; |
| rdesc = (struct rtq2208_regulator_desc *)match->driver_data; |
| |
| if (!init_data || !rdesc) |
| continue; |
| |
| if (init_data->constraints.min_uV == init_data->constraints.max_uV) |
| rdesc->desc.fixed_uV = init_data->constraints.min_uV; |
| } |
| |
| return 0; |
| } |
| |
| static void rtq2208_init_regulator_desc(struct rtq2208_regulator_desc *rdesc, int mtp_sel, |
| int idx, struct of_regulator_match *rtq2208_ldo_match, int *ldo_idx) |
| { |
| struct regulator_desc *desc; |
| static const struct { |
| char *name; |
| int base; |
| } regulator_info[] = { |
| RTQ2208_REGULATOR_INFO(buck-b, BUCK_RG_BASE(B)), |
| RTQ2208_REGULATOR_INFO(buck-c, BUCK_RG_BASE(C)), |
| RTQ2208_REGULATOR_INFO(buck-d, BUCK_RG_BASE(D)), |
| RTQ2208_REGULATOR_INFO(buck-a, BUCK_RG_BASE(A)), |
| RTQ2208_REGULATOR_INFO(buck-f, BUCK_RG_BASE(F)), |
| RTQ2208_REGULATOR_INFO(buck-g, BUCK_RG_BASE(G)), |
| RTQ2208_REGULATOR_INFO(buck-h, BUCK_RG_BASE(H)), |
| RTQ2208_REGULATOR_INFO(buck-e, BUCK_RG_BASE(E)), |
| RTQ2208_REGULATOR_INFO(ldo2, LDO_RG_BASE(2)), |
| RTQ2208_REGULATOR_INFO(ldo1, LDO_RG_BASE(1)), |
| }, *curr_info; |
| |
| curr_info = regulator_info + idx; |
| desc = &rdesc->desc; |
| desc->name = curr_info->name; |
| desc->of_match = of_match_ptr(curr_info->name); |
| desc->regulators_node = of_match_ptr("regulators"); |
| desc->id = idx; |
| desc->owner = THIS_MODULE; |
| desc->type = REGULATOR_VOLTAGE; |
| desc->enable_mask = mtp_sel ? MTP_SEL_MASK(1) : MTP_SEL_MASK(0); |
| desc->active_discharge_on = RTQ2208_EN_DIS_MASK; |
| desc->active_discharge_off = 0; |
| desc->active_discharge_mask = RTQ2208_EN_DIS_MASK; |
| |
| rdesc->mode_mask = RTQ2208_BUCK_NRMODE_MASK; |
| |
| if (idx >= RTQ2208_BUCK_B && idx <= RTQ2208_BUCK_E) { |
| /* init buck desc */ |
| desc->enable_reg = BUCK_RG_SHIFT(curr_info->base, 2); |
| desc->ops = &rtq2208_regulator_buck_ops; |
| desc->vsel_reg = curr_info->base + VSEL_SHIFT(mtp_sel); |
| desc->vsel_mask = RTQ2208_BUCK_NR_MTP_SEL_MASK; |
| desc->n_voltages = RTQ2208_VOUT_MAXNUM; |
| desc->linear_ranges = rtq2208_vout_range; |
| desc->n_linear_ranges = ARRAY_SIZE(rtq2208_vout_range); |
| desc->ramp_reg = BUCK_RG_SHIFT(curr_info->base, 5); |
| desc->active_discharge_reg = curr_info->base; |
| desc->of_map_mode = rtq2208_of_map_mode; |
| |
| rdesc->mode_reg = BUCK_RG_SHIFT(curr_info->base, 2); |
| rdesc->suspend_config_reg = BUCK_RG_SHIFT(curr_info->base, 4); |
| rdesc->suspend_enable_mask = RTQ2208_BUCK_EN_STR_MASK; |
| rdesc->suspend_mode_mask = RTQ2208_BUCK_STRMODE_MASK; |
| } else { |
| /* init ldo desc */ |
| desc->enable_reg = curr_info->base; |
| desc->ops = &rtq2208_regulator_ldo_ops; |
| desc->n_voltages = 1; |
| desc->active_discharge_reg = LDO_RG_SHIFT(curr_info->base, 2); |
| |
| rtq2208_ldo_match[*ldo_idx].name = desc->name; |
| rtq2208_ldo_match[*ldo_idx].driver_data = rdesc; |
| rtq2208_ldo_match[(*ldo_idx)++].desc = desc; |
| |
| rdesc->suspend_config_reg = curr_info->base; |
| rdesc->suspend_enable_mask = RTQ2208_LDO_EN_STR_MASK; |
| } |
| } |
| |
| static int rtq2208_parse_regulator_dt_data(int n_regulator, const unsigned int *regulator_idx_table, |
| struct rtq2208_regulator_desc *rdesc[RTQ2208_LDO_MAX], struct device *dev) |
| { |
| struct of_regulator_match rtq2208_ldo_match[2]; |
| int mtp_sel, ret, i, idx, ldo_idx = 0; |
| |
| /* get mtp_sel0 or mtp_sel1 */ |
| mtp_sel = device_property_read_bool(dev, "richtek,mtp-sel-high"); |
| |
| for (i = 0; i < n_regulator; i++) { |
| idx = regulator_idx_table[i]; |
| |
| rdesc[i] = devm_kcalloc(dev, 1, sizeof(*rdesc[0]), GFP_KERNEL); |
| if (!rdesc[i]) |
| return -ENOMEM; |
| |
| rtq2208_init_regulator_desc(rdesc[i], mtp_sel, idx, rtq2208_ldo_match, &ldo_idx); |
| } |
| |
| /* init ldo fixed_uV */ |
| ret = rtq2208_of_get_fixed_voltage(dev, rtq2208_ldo_match, ldo_idx); |
| if (ret) |
| return dev_err_probe(dev, ret, "Failed to get ldo fixed_uV\n"); |
| |
| return 0; |
| |
| } |
| |
| /** different slave address corresponds different used bucks |
| * slave address 0x10: BUCK[BCA FGE] |
| * slave address 0x20: BUCK[BC FGHE] |
| * slave address 0x40: BUCK[C G] |
| */ |
| static int rtq2208_regulator_check(int slave_addr, int *num, |
| int *regulator_idx_table, unsigned int *buck_masks) |
| { |
| static bool rtq2208_used_table[3][RTQ2208_LDO_MAX] = { |
| /* BUCK[BCA FGE], LDO[12] */ |
| {1, 1, 0, 1, 1, 1, 0, 1, 1, 1}, |
| /* BUCK[BC FGHE], LDO[12]*/ |
| {1, 1, 0, 0, 1, 1, 1, 1, 1, 1}, |
| /* BUCK[C G], LDO[12] */ |
| {0, 1, 0, 0, 0, 1, 0, 0, 1, 1}, |
| }; |
| int i, idx = ffs(slave_addr >> 4) - 1; |
| u8 mask; |
| |
| for (i = 0; i < RTQ2208_LDO_MAX; i++) { |
| if (!rtq2208_used_table[idx][i]) |
| continue; |
| |
| regulator_idx_table[(*num)++] = i; |
| |
| mask = RTQ2208_BUCK_MASK(4 * i, 4 * i + 1); |
| buck_masks[i >> 1] &= ~mask; |
| } |
| |
| return 0; |
| } |
| |
| static const struct regmap_config rtq2208_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = 0xEF, |
| }; |
| |
| static int rtq2208_probe(struct i2c_client *i2c) |
| { |
| struct device *dev = &i2c->dev; |
| struct regmap *regmap; |
| struct rtq2208_regulator_desc *rdesc[RTQ2208_LDO_MAX]; |
| struct regulator_dev *rdev; |
| struct regulator_config cfg; |
| struct rtq2208_rdev_map *rdev_map; |
| int i, ret = 0, idx, n_regulator = 0; |
| unsigned int regulator_idx_table[RTQ2208_LDO_MAX], |
| buck_masks[RTQ2208_BUCK_NUM_IRQ_REGS] = {0x33, 0x33, 0x33, 0x33, 0x33}; |
| |
| rdev_map = devm_kzalloc(dev, sizeof(struct rtq2208_rdev_map), GFP_KERNEL); |
| if (!rdev_map) |
| return -ENOMEM; |
| |
| regmap = devm_regmap_init_i2c(i2c, &rtq2208_regmap_config); |
| if (IS_ERR(regmap)) |
| return dev_err_probe(dev, PTR_ERR(regmap), "Failed to allocate regmap\n"); |
| |
| /* get needed regulator */ |
| ret = rtq2208_regulator_check(i2c->addr, &n_regulator, regulator_idx_table, buck_masks); |
| if (ret) |
| return dev_err_probe(dev, ret, "Failed to check used regulators\n"); |
| |
| rdev_map->regmap = regmap; |
| rdev_map->dev = dev; |
| |
| cfg.dev = dev; |
| |
| /* init regulator desc */ |
| ret = rtq2208_parse_regulator_dt_data(n_regulator, regulator_idx_table, rdesc, dev); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < n_regulator; i++) { |
| idx = regulator_idx_table[i]; |
| |
| /* register regulator */ |
| rdev = devm_regulator_register(dev, &rdesc[i]->desc, &cfg); |
| if (IS_ERR(rdev)) |
| return PTR_ERR(rdev); |
| |
| rdev_map->rdev[idx] = rdev; |
| } |
| |
| /* init interrupt mask */ |
| ret = rtq2208_init_irq_mask(rdev_map, buck_masks); |
| if (ret) |
| return ret; |
| |
| /* register interrupt */ |
| return devm_request_threaded_irq(dev, i2c->irq, NULL, rtq2208_irq_handler, |
| IRQF_ONESHOT, dev_name(dev), rdev_map); |
| } |
| |
| static const struct of_device_id rtq2208_device_tables[] = { |
| { .compatible = "richtek,rtq2208" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, rtq2208_device_tables); |
| |
| static struct i2c_driver rtq2208_driver = { |
| .driver = { |
| .name = "rtq2208", |
| .of_match_table = rtq2208_device_tables, |
| }, |
| .probe = rtq2208_probe, |
| }; |
| module_i2c_driver(rtq2208_driver); |
| |
| MODULE_AUTHOR("Alina Yu <alina_yu@richtek.com>"); |
| MODULE_DESCRIPTION("Richtek RTQ2208 Regulator Driver"); |
| MODULE_LICENSE("GPL"); |