| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * mtu3_dr.c - dual role switch and host glue layer |
| * |
| * Copyright (C) 2016 MediaTek Inc. |
| * |
| * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> |
| */ |
| |
| #include "mtu3.h" |
| #include "mtu3_dr.h" |
| #include "mtu3_debug.h" |
| |
| #define USB2_PORT 2 |
| #define USB3_PORT 3 |
| |
| static inline struct ssusb_mtk *otg_sx_to_ssusb(struct otg_switch_mtk *otg_sx) |
| { |
| return container_of(otg_sx, struct ssusb_mtk, otg_switch); |
| } |
| |
| static void toggle_opstate(struct ssusb_mtk *ssusb) |
| { |
| mtu3_setbits(ssusb->mac_base, U3D_DEVICE_CONTROL, DC_SESSION); |
| mtu3_setbits(ssusb->mac_base, U3D_POWER_MANAGEMENT, SOFT_CONN); |
| } |
| |
| /* only port0 supports dual-role mode */ |
| static int ssusb_port0_switch(struct ssusb_mtk *ssusb, |
| int version, bool tohost) |
| { |
| void __iomem *ibase = ssusb->ippc_base; |
| u32 value; |
| |
| dev_dbg(ssusb->dev, "%s (switch u%d port0 to %s)\n", __func__, |
| version, tohost ? "host" : "device"); |
| |
| if (version == USB2_PORT) { |
| /* 1. power off and disable u2 port0 */ |
| value = mtu3_readl(ibase, SSUSB_U2_CTRL(0)); |
| value |= SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS; |
| mtu3_writel(ibase, SSUSB_U2_CTRL(0), value); |
| |
| /* 2. power on, enable u2 port0 and select its mode */ |
| value = mtu3_readl(ibase, SSUSB_U2_CTRL(0)); |
| value &= ~(SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS); |
| value = tohost ? (value | SSUSB_U2_PORT_HOST_SEL) : |
| (value & (~SSUSB_U2_PORT_HOST_SEL)); |
| mtu3_writel(ibase, SSUSB_U2_CTRL(0), value); |
| } else { |
| /* 1. power off and disable u3 port0 */ |
| value = mtu3_readl(ibase, SSUSB_U3_CTRL(0)); |
| value |= SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS; |
| mtu3_writel(ibase, SSUSB_U3_CTRL(0), value); |
| |
| /* 2. power on, enable u3 port0 and select its mode */ |
| value = mtu3_readl(ibase, SSUSB_U3_CTRL(0)); |
| value &= ~(SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS); |
| value = tohost ? (value | SSUSB_U3_PORT_HOST_SEL) : |
| (value & (~SSUSB_U3_PORT_HOST_SEL)); |
| mtu3_writel(ibase, SSUSB_U3_CTRL(0), value); |
| } |
| |
| return 0; |
| } |
| |
| static void switch_port_to_host(struct ssusb_mtk *ssusb) |
| { |
| u32 check_clk = 0; |
| |
| dev_dbg(ssusb->dev, "%s\n", __func__); |
| |
| ssusb_port0_switch(ssusb, USB2_PORT, true); |
| |
| if (ssusb->otg_switch.is_u3_drd) { |
| ssusb_port0_switch(ssusb, USB3_PORT, true); |
| check_clk = SSUSB_U3_MAC_RST_B_STS; |
| } |
| |
| ssusb_check_clocks(ssusb, check_clk); |
| |
| /* after all clocks are stable */ |
| toggle_opstate(ssusb); |
| } |
| |
| static void switch_port_to_device(struct ssusb_mtk *ssusb) |
| { |
| u32 check_clk = 0; |
| |
| dev_dbg(ssusb->dev, "%s\n", __func__); |
| |
| ssusb_port0_switch(ssusb, USB2_PORT, false); |
| |
| if (ssusb->otg_switch.is_u3_drd) { |
| ssusb_port0_switch(ssusb, USB3_PORT, false); |
| check_clk = SSUSB_U3_MAC_RST_B_STS; |
| } |
| |
| ssusb_check_clocks(ssusb, check_clk); |
| } |
| |
| int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on) |
| { |
| struct ssusb_mtk *ssusb = otg_sx_to_ssusb(otg_sx); |
| struct regulator *vbus = otg_sx->vbus; |
| int ret; |
| |
| /* vbus is optional */ |
| if (!vbus) |
| return 0; |
| |
| dev_dbg(ssusb->dev, "%s: turn %s\n", __func__, is_on ? "on" : "off"); |
| |
| if (is_on) { |
| ret = regulator_enable(vbus); |
| if (ret) { |
| dev_err(ssusb->dev, "vbus regulator enable failed\n"); |
| return ret; |
| } |
| } else { |
| regulator_disable(vbus); |
| } |
| |
| return 0; |
| } |
| |
| static void ssusb_mode_sw_work(struct work_struct *work) |
| { |
| struct otg_switch_mtk *otg_sx = |
| container_of(work, struct otg_switch_mtk, dr_work); |
| struct ssusb_mtk *ssusb = otg_sx_to_ssusb(otg_sx); |
| struct mtu3 *mtu = ssusb->u3d; |
| enum usb_role desired_role = otg_sx->desired_role; |
| enum usb_role current_role; |
| |
| current_role = ssusb->is_host ? USB_ROLE_HOST : USB_ROLE_DEVICE; |
| |
| if (desired_role == USB_ROLE_NONE) { |
| /* the default mode is host as probe does */ |
| desired_role = USB_ROLE_HOST; |
| if (otg_sx->default_role == USB_ROLE_DEVICE) |
| desired_role = USB_ROLE_DEVICE; |
| } |
| |
| if (current_role == desired_role) |
| return; |
| |
| dev_dbg(ssusb->dev, "set role : %s\n", usb_role_string(desired_role)); |
| mtu3_dbg_trace(ssusb->dev, "set role : %s", usb_role_string(desired_role)); |
| pm_runtime_get_sync(ssusb->dev); |
| |
| switch (desired_role) { |
| case USB_ROLE_HOST: |
| ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST); |
| mtu3_stop(mtu); |
| switch_port_to_host(ssusb); |
| ssusb_set_vbus(otg_sx, 1); |
| ssusb->is_host = true; |
| break; |
| case USB_ROLE_DEVICE: |
| ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_DEVICE); |
| ssusb->is_host = false; |
| ssusb_set_vbus(otg_sx, 0); |
| switch_port_to_device(ssusb); |
| mtu3_start(mtu); |
| break; |
| case USB_ROLE_NONE: |
| default: |
| dev_err(ssusb->dev, "invalid role\n"); |
| } |
| pm_runtime_put(ssusb->dev); |
| } |
| |
| static void ssusb_set_mode(struct otg_switch_mtk *otg_sx, enum usb_role role) |
| { |
| struct ssusb_mtk *ssusb = otg_sx_to_ssusb(otg_sx); |
| |
| if (ssusb->dr_mode != USB_DR_MODE_OTG) |
| return; |
| |
| otg_sx->desired_role = role; |
| queue_work(system_freezable_wq, &otg_sx->dr_work); |
| } |
| |
| static int ssusb_id_notifier(struct notifier_block *nb, |
| unsigned long event, void *ptr) |
| { |
| struct otg_switch_mtk *otg_sx = |
| container_of(nb, struct otg_switch_mtk, id_nb); |
| |
| ssusb_set_mode(otg_sx, event ? USB_ROLE_HOST : USB_ROLE_DEVICE); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static int ssusb_extcon_register(struct otg_switch_mtk *otg_sx) |
| { |
| struct ssusb_mtk *ssusb = otg_sx_to_ssusb(otg_sx); |
| struct extcon_dev *edev = otg_sx->edev; |
| int ret; |
| |
| /* extcon is optional */ |
| if (!edev) |
| return 0; |
| |
| otg_sx->id_nb.notifier_call = ssusb_id_notifier; |
| ret = devm_extcon_register_notifier(ssusb->dev, edev, EXTCON_USB_HOST, |
| &otg_sx->id_nb); |
| if (ret < 0) { |
| dev_err(ssusb->dev, "failed to register notifier for USB-HOST\n"); |
| return ret; |
| } |
| |
| ret = extcon_get_state(edev, EXTCON_USB_HOST); |
| dev_dbg(ssusb->dev, "EXTCON_USB_HOST: %d\n", ret); |
| |
| /* default as host, switch to device mode if needed */ |
| if (!ret) |
| ssusb_set_mode(otg_sx, USB_ROLE_DEVICE); |
| |
| return 0; |
| } |
| |
| /* |
| * We provide an interface via debugfs to switch between host and device modes |
| * depending on user input. |
| * This is useful in special cases, such as uses TYPE-A receptacle but also |
| * wants to support dual-role mode. |
| */ |
| void ssusb_mode_switch(struct ssusb_mtk *ssusb, int to_host) |
| { |
| struct otg_switch_mtk *otg_sx = &ssusb->otg_switch; |
| |
| ssusb_set_mode(otg_sx, to_host ? USB_ROLE_HOST : USB_ROLE_DEVICE); |
| } |
| |
| void ssusb_set_force_mode(struct ssusb_mtk *ssusb, |
| enum mtu3_dr_force_mode mode) |
| { |
| u32 value; |
| |
| value = mtu3_readl(ssusb->ippc_base, SSUSB_U2_CTRL(0)); |
| switch (mode) { |
| case MTU3_DR_FORCE_DEVICE: |
| value |= SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG; |
| break; |
| case MTU3_DR_FORCE_HOST: |
| value |= SSUSB_U2_PORT_FORCE_IDDIG; |
| value &= ~SSUSB_U2_PORT_RG_IDDIG; |
| break; |
| case MTU3_DR_FORCE_NONE: |
| value &= ~(SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG); |
| break; |
| default: |
| return; |
| } |
| mtu3_writel(ssusb->ippc_base, SSUSB_U2_CTRL(0), value); |
| } |
| |
| static int ssusb_role_sw_set(struct usb_role_switch *sw, enum usb_role role) |
| { |
| struct ssusb_mtk *ssusb = usb_role_switch_get_drvdata(sw); |
| struct otg_switch_mtk *otg_sx = &ssusb->otg_switch; |
| |
| ssusb_set_mode(otg_sx, role); |
| |
| return 0; |
| } |
| |
| static enum usb_role ssusb_role_sw_get(struct usb_role_switch *sw) |
| { |
| struct ssusb_mtk *ssusb = usb_role_switch_get_drvdata(sw); |
| |
| return ssusb->is_host ? USB_ROLE_HOST : USB_ROLE_DEVICE; |
| } |
| |
| static int ssusb_role_sw_register(struct otg_switch_mtk *otg_sx) |
| { |
| struct usb_role_switch_desc role_sx_desc = { 0 }; |
| struct ssusb_mtk *ssusb = otg_sx_to_ssusb(otg_sx); |
| struct device *dev = ssusb->dev; |
| enum usb_dr_mode mode; |
| |
| if (!otg_sx->role_sw_used) |
| return 0; |
| |
| mode = usb_get_role_switch_default_mode(dev); |
| if (mode == USB_DR_MODE_PERIPHERAL) |
| otg_sx->default_role = USB_ROLE_DEVICE; |
| else |
| otg_sx->default_role = USB_ROLE_HOST; |
| |
| role_sx_desc.set = ssusb_role_sw_set; |
| role_sx_desc.get = ssusb_role_sw_get; |
| role_sx_desc.fwnode = dev_fwnode(dev); |
| role_sx_desc.driver_data = ssusb; |
| role_sx_desc.allow_userspace_control = true; |
| otg_sx->role_sw = usb_role_switch_register(dev, &role_sx_desc); |
| if (IS_ERR(otg_sx->role_sw)) |
| return PTR_ERR(otg_sx->role_sw); |
| |
| ssusb_set_mode(otg_sx, otg_sx->default_role); |
| |
| return 0; |
| } |
| |
| int ssusb_otg_switch_init(struct ssusb_mtk *ssusb) |
| { |
| struct otg_switch_mtk *otg_sx = &ssusb->otg_switch; |
| int ret = 0; |
| |
| INIT_WORK(&otg_sx->dr_work, ssusb_mode_sw_work); |
| |
| if (otg_sx->manual_drd_enabled) |
| ssusb_dr_debugfs_init(ssusb); |
| else if (otg_sx->role_sw_used) |
| ret = ssusb_role_sw_register(otg_sx); |
| else |
| ret = ssusb_extcon_register(otg_sx); |
| |
| return ret; |
| } |
| |
| void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb) |
| { |
| struct otg_switch_mtk *otg_sx = &ssusb->otg_switch; |
| |
| cancel_work_sync(&otg_sx->dr_work); |
| usb_role_switch_unregister(otg_sx->role_sw); |
| } |