| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * AMD RPL ACP PCI Driver |
| * |
| * Copyright 2022 Advanced Micro Devices, Inc. |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/module.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| |
| #include "rpl_acp6x.h" |
| |
| struct rpl_dev_data { |
| void __iomem *acp6x_base; |
| }; |
| |
| static int rpl_power_on(void __iomem *acp_base) |
| { |
| u32 val; |
| int timeout; |
| |
| val = rpl_acp_readl(acp_base + ACP_PGFSM_STATUS); |
| |
| if (!val) |
| return val; |
| |
| if ((val & ACP_PGFSM_STATUS_MASK) != ACP_POWER_ON_IN_PROGRESS) |
| rpl_acp_writel(ACP_PGFSM_CNTL_POWER_ON_MASK, acp_base + ACP_PGFSM_CONTROL); |
| timeout = 0; |
| while (++timeout < 500) { |
| val = rpl_acp_readl(acp_base + ACP_PGFSM_STATUS); |
| if (!val) |
| return 0; |
| udelay(1); |
| } |
| return -ETIMEDOUT; |
| } |
| |
| static int rpl_reset(void __iomem *acp_base) |
| { |
| u32 val; |
| int timeout; |
| |
| rpl_acp_writel(1, acp_base + ACP_SOFT_RESET); |
| timeout = 0; |
| while (++timeout < 500) { |
| val = rpl_acp_readl(acp_base + ACP_SOFT_RESET); |
| if (val & ACP_SOFT_RESET_SOFTRESET_AUDDONE_MASK) |
| break; |
| cpu_relax(); |
| } |
| rpl_acp_writel(0, acp_base + ACP_SOFT_RESET); |
| timeout = 0; |
| while (++timeout < 500) { |
| val = rpl_acp_readl(acp_base + ACP_SOFT_RESET); |
| if (!val) |
| return 0; |
| cpu_relax(); |
| } |
| return -ETIMEDOUT; |
| } |
| |
| static int rpl_init(void __iomem *acp_base) |
| { |
| int ret; |
| |
| /* power on */ |
| ret = rpl_power_on(acp_base); |
| if (ret) { |
| pr_err("ACP power on failed\n"); |
| return ret; |
| } |
| rpl_acp_writel(0x01, acp_base + ACP_CONTROL); |
| /* Reset */ |
| ret = rpl_reset(acp_base); |
| if (ret) { |
| pr_err("ACP reset failed\n"); |
| return ret; |
| } |
| rpl_acp_writel(0x03, acp_base + ACP_CLKMUX_SEL); |
| return 0; |
| } |
| |
| static int rpl_deinit(void __iomem *acp_base) |
| { |
| int ret; |
| |
| /* Reset */ |
| ret = rpl_reset(acp_base); |
| if (ret) { |
| pr_err("ACP reset failed\n"); |
| return ret; |
| } |
| rpl_acp_writel(0x00, acp_base + ACP_CLKMUX_SEL); |
| rpl_acp_writel(0x00, acp_base + ACP_CONTROL); |
| return 0; |
| } |
| |
| static int snd_rpl_probe(struct pci_dev *pci, |
| const struct pci_device_id *pci_id) |
| { |
| struct rpl_dev_data *adata; |
| u32 addr; |
| int ret; |
| |
| /* RPL device check */ |
| switch (pci->revision) { |
| case 0x62: |
| break; |
| default: |
| dev_dbg(&pci->dev, "acp6x pci device not found\n"); |
| return -ENODEV; |
| } |
| if (pci_enable_device(pci)) { |
| dev_err(&pci->dev, "pci_enable_device failed\n"); |
| return -ENODEV; |
| } |
| |
| ret = pci_request_regions(pci, "AMD ACP6x audio"); |
| if (ret < 0) { |
| dev_err(&pci->dev, "pci_request_regions failed\n"); |
| goto disable_pci; |
| } |
| |
| adata = devm_kzalloc(&pci->dev, sizeof(struct rpl_dev_data), |
| GFP_KERNEL); |
| if (!adata) { |
| ret = -ENOMEM; |
| goto release_regions; |
| } |
| |
| addr = pci_resource_start(pci, 0); |
| adata->acp6x_base = devm_ioremap(&pci->dev, addr, |
| pci_resource_len(pci, 0)); |
| if (!adata->acp6x_base) { |
| ret = -ENOMEM; |
| goto release_regions; |
| } |
| pci_set_master(pci); |
| pci_set_drvdata(pci, adata); |
| ret = rpl_init(adata->acp6x_base); |
| if (ret) |
| goto release_regions; |
| pm_runtime_set_autosuspend_delay(&pci->dev, ACP_SUSPEND_DELAY_MS); |
| pm_runtime_use_autosuspend(&pci->dev); |
| pm_runtime_put_noidle(&pci->dev); |
| pm_runtime_allow(&pci->dev); |
| |
| return 0; |
| release_regions: |
| pci_release_regions(pci); |
| disable_pci: |
| pci_disable_device(pci); |
| |
| return ret; |
| } |
| |
| static int __maybe_unused snd_rpl_suspend(struct device *dev) |
| { |
| struct rpl_dev_data *adata; |
| int ret; |
| |
| adata = dev_get_drvdata(dev); |
| ret = rpl_deinit(adata->acp6x_base); |
| if (ret) |
| dev_err(dev, "ACP de-init failed\n"); |
| return ret; |
| } |
| |
| static int __maybe_unused snd_rpl_resume(struct device *dev) |
| { |
| struct rpl_dev_data *adata; |
| int ret; |
| |
| adata = dev_get_drvdata(dev); |
| ret = rpl_init(adata->acp6x_base); |
| if (ret) |
| dev_err(dev, "ACP init failed\n"); |
| return ret; |
| } |
| |
| static const struct dev_pm_ops rpl_pm = { |
| SET_RUNTIME_PM_OPS(snd_rpl_suspend, snd_rpl_resume, NULL) |
| SET_SYSTEM_SLEEP_PM_OPS(snd_rpl_suspend, snd_rpl_resume) |
| }; |
| |
| static void snd_rpl_remove(struct pci_dev *pci) |
| { |
| struct rpl_dev_data *adata; |
| int ret; |
| |
| adata = pci_get_drvdata(pci); |
| ret = rpl_deinit(adata->acp6x_base); |
| if (ret) |
| dev_err(&pci->dev, "ACP de-init failed\n"); |
| pm_runtime_forbid(&pci->dev); |
| pm_runtime_get_noresume(&pci->dev); |
| pci_release_regions(pci); |
| pci_disable_device(pci); |
| } |
| |
| static const struct pci_device_id snd_rpl_ids[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_AMD, ACP_DEVICE_ID), |
| .class = PCI_CLASS_MULTIMEDIA_OTHER << 8, |
| .class_mask = 0xffffff }, |
| { 0, }, |
| }; |
| MODULE_DEVICE_TABLE(pci, snd_rpl_ids); |
| |
| static struct pci_driver rpl_acp6x_driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = snd_rpl_ids, |
| .probe = snd_rpl_probe, |
| .remove = snd_rpl_remove, |
| .driver = { |
| .pm = &rpl_pm, |
| } |
| }; |
| |
| module_pci_driver(rpl_acp6x_driver); |
| |
| MODULE_DESCRIPTION("AMD ACP RPL PCI driver"); |
| MODULE_LICENSE("GPL v2"); |