| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Driver for Intel(R) 10nm server memory controller. |
| * Copyright (c) 2019, Intel Corporation. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/io.h> |
| #include <asm/cpu_device_id.h> |
| #include <asm/intel-family.h> |
| #include <asm/mce.h> |
| #include "edac_module.h" |
| #include "skx_common.h" |
| |
| #define I10NM_REVISION "v0.0.5" |
| #define EDAC_MOD_STR "i10nm_edac" |
| |
| /* Debug macros */ |
| #define i10nm_printk(level, fmt, arg...) \ |
| edac_printk(level, "i10nm", fmt, ##arg) |
| |
| #define I10NM_GET_SCK_BAR(d, reg) \ |
| pci_read_config_dword((d)->uracu, 0xd0, &(reg)) |
| #define I10NM_GET_IMC_BAR(d, i, reg) \ |
| pci_read_config_dword((d)->uracu, 0xd8 + (i) * 4, &(reg)) |
| #define I10NM_GET_SAD(d, offset, i, reg)\ |
| pci_read_config_dword((d)->sad_all, (offset) + (i) * 8, &(reg)) |
| #define I10NM_GET_HBM_IMC_BAR(d, reg) \ |
| pci_read_config_dword((d)->uracu, 0xd4, &(reg)) |
| #define I10NM_GET_CAPID3_CFG(d, reg) \ |
| pci_read_config_dword((d)->pcu_cr3, 0x90, &(reg)) |
| #define I10NM_GET_DIMMMTR(m, i, j) \ |
| readl((m)->mbase + ((m)->hbm_mc ? 0x80c : 0x2080c) + \ |
| (i) * (m)->chan_mmio_sz + (j) * 4) |
| #define I10NM_GET_MCDDRTCFG(m, i) \ |
| readl((m)->mbase + ((m)->hbm_mc ? 0x970 : 0x20970) + \ |
| (i) * (m)->chan_mmio_sz) |
| #define I10NM_GET_MCMTR(m, i) \ |
| readl((m)->mbase + ((m)->hbm_mc ? 0xef8 : 0x20ef8) + \ |
| (i) * (m)->chan_mmio_sz) |
| #define I10NM_GET_AMAP(m, i) \ |
| readl((m)->mbase + ((m)->hbm_mc ? 0x814 : 0x20814) + \ |
| (i) * (m)->chan_mmio_sz) |
| #define I10NM_GET_REG32(m, i, offset) \ |
| readl((m)->mbase + (i) * (m)->chan_mmio_sz + (offset)) |
| #define I10NM_GET_REG64(m, i, offset) \ |
| readq((m)->mbase + (i) * (m)->chan_mmio_sz + (offset)) |
| #define I10NM_SET_REG32(m, i, offset, v) \ |
| writel(v, (m)->mbase + (i) * (m)->chan_mmio_sz + (offset)) |
| |
| #define I10NM_GET_SCK_MMIO_BASE(reg) (GET_BITFIELD(reg, 0, 28) << 23) |
| #define I10NM_GET_IMC_MMIO_OFFSET(reg) (GET_BITFIELD(reg, 0, 10) << 12) |
| #define I10NM_GET_IMC_MMIO_SIZE(reg) ((GET_BITFIELD(reg, 13, 23) - \ |
| GET_BITFIELD(reg, 0, 10) + 1) << 12) |
| #define I10NM_GET_HBM_IMC_MMIO_OFFSET(reg) \ |
| ((GET_BITFIELD(reg, 0, 10) << 12) + 0x140000) |
| |
| #define I10NM_HBM_IMC_MMIO_SIZE 0x9000 |
| #define I10NM_IS_HBM_PRESENT(reg) GET_BITFIELD(reg, 27, 30) |
| #define I10NM_IS_HBM_IMC(reg) GET_BITFIELD(reg, 29, 29) |
| |
| #define I10NM_MAX_SAD 16 |
| #define I10NM_SAD_ENABLE(reg) GET_BITFIELD(reg, 0, 0) |
| #define I10NM_SAD_NM_CACHEABLE(reg) GET_BITFIELD(reg, 5, 5) |
| |
| #define RETRY_RD_ERR_LOG_UC BIT(1) |
| #define RETRY_RD_ERR_LOG_NOOVER BIT(14) |
| #define RETRY_RD_ERR_LOG_EN BIT(15) |
| #define RETRY_RD_ERR_LOG_NOOVER_UC (BIT(14) | BIT(1)) |
| #define RETRY_RD_ERR_LOG_OVER_UC_V (BIT(2) | BIT(1) | BIT(0)) |
| |
| static struct list_head *i10nm_edac_list; |
| |
| static struct res_config *res_cfg; |
| static int retry_rd_err_log; |
| |
| static u32 offsets_scrub_icx[] = {0x22c60, 0x22c54, 0x22c5c, 0x22c58, 0x22c28, 0x20ed8}; |
| static u32 offsets_scrub_spr[] = {0x22c60, 0x22c54, 0x22f08, 0x22c58, 0x22c28, 0x20ed8}; |
| static u32 offsets_demand_icx[] = {0x22e54, 0x22e60, 0x22e64, 0x22e58, 0x22e5c, 0x20ee0}; |
| static u32 offsets_demand_spr[] = {0x22e54, 0x22e60, 0x22f10, 0x22e58, 0x22e5c, 0x20ee0}; |
| |
| static void __enable_retry_rd_err_log(struct skx_imc *imc, int chan, bool enable) |
| { |
| u32 s, d; |
| |
| if (!imc->mbase) |
| return; |
| |
| s = I10NM_GET_REG32(imc, chan, res_cfg->offsets_scrub[0]); |
| d = I10NM_GET_REG32(imc, chan, res_cfg->offsets_demand[0]); |
| |
| if (enable) { |
| /* Save default configurations */ |
| imc->chan[chan].retry_rd_err_log_s = s; |
| imc->chan[chan].retry_rd_err_log_d = d; |
| |
| s &= ~RETRY_RD_ERR_LOG_NOOVER_UC; |
| s |= RETRY_RD_ERR_LOG_EN; |
| d &= ~RETRY_RD_ERR_LOG_NOOVER_UC; |
| d |= RETRY_RD_ERR_LOG_EN; |
| } else { |
| /* Restore default configurations */ |
| if (imc->chan[chan].retry_rd_err_log_s & RETRY_RD_ERR_LOG_UC) |
| s |= RETRY_RD_ERR_LOG_UC; |
| if (imc->chan[chan].retry_rd_err_log_s & RETRY_RD_ERR_LOG_NOOVER) |
| s |= RETRY_RD_ERR_LOG_NOOVER; |
| if (!(imc->chan[chan].retry_rd_err_log_s & RETRY_RD_ERR_LOG_EN)) |
| s &= ~RETRY_RD_ERR_LOG_EN; |
| if (imc->chan[chan].retry_rd_err_log_d & RETRY_RD_ERR_LOG_UC) |
| d |= RETRY_RD_ERR_LOG_UC; |
| if (imc->chan[chan].retry_rd_err_log_d & RETRY_RD_ERR_LOG_NOOVER) |
| d |= RETRY_RD_ERR_LOG_NOOVER; |
| if (!(imc->chan[chan].retry_rd_err_log_d & RETRY_RD_ERR_LOG_EN)) |
| d &= ~RETRY_RD_ERR_LOG_EN; |
| } |
| |
| I10NM_SET_REG32(imc, chan, res_cfg->offsets_scrub[0], s); |
| I10NM_SET_REG32(imc, chan, res_cfg->offsets_demand[0], d); |
| } |
| |
| static void enable_retry_rd_err_log(bool enable) |
| { |
| struct skx_dev *d; |
| int i, j; |
| |
| edac_dbg(2, "\n"); |
| |
| list_for_each_entry(d, i10nm_edac_list, list) |
| for (i = 0; i < I10NM_NUM_IMC; i++) |
| for (j = 0; j < I10NM_NUM_CHANNELS; j++) |
| __enable_retry_rd_err_log(&d->imc[i], j, enable); |
| } |
| |
| static void show_retry_rd_err_log(struct decoded_addr *res, char *msg, |
| int len, bool scrub_err) |
| { |
| struct skx_imc *imc = &res->dev->imc[res->imc]; |
| u32 log0, log1, log2, log3, log4; |
| u32 corr0, corr1, corr2, corr3; |
| u64 log2a, log5; |
| u32 *offsets; |
| int n; |
| |
| if (!imc->mbase) |
| return; |
| |
| offsets = scrub_err ? res_cfg->offsets_scrub : res_cfg->offsets_demand; |
| |
| log0 = I10NM_GET_REG32(imc, res->channel, offsets[0]); |
| log1 = I10NM_GET_REG32(imc, res->channel, offsets[1]); |
| log3 = I10NM_GET_REG32(imc, res->channel, offsets[3]); |
| log4 = I10NM_GET_REG32(imc, res->channel, offsets[4]); |
| log5 = I10NM_GET_REG64(imc, res->channel, offsets[5]); |
| |
| if (res_cfg->type == SPR) { |
| log2a = I10NM_GET_REG64(imc, res->channel, offsets[2]); |
| n = snprintf(msg, len, " retry_rd_err_log[%.8x %.8x %.16llx %.8x %.8x %.16llx]", |
| log0, log1, log2a, log3, log4, log5); |
| } else { |
| log2 = I10NM_GET_REG32(imc, res->channel, offsets[2]); |
| n = snprintf(msg, len, " retry_rd_err_log[%.8x %.8x %.8x %.8x %.8x %.16llx]", |
| log0, log1, log2, log3, log4, log5); |
| } |
| |
| corr0 = I10NM_GET_REG32(imc, res->channel, 0x22c18); |
| corr1 = I10NM_GET_REG32(imc, res->channel, 0x22c1c); |
| corr2 = I10NM_GET_REG32(imc, res->channel, 0x22c20); |
| corr3 = I10NM_GET_REG32(imc, res->channel, 0x22c24); |
| |
| if (len - n > 0) |
| snprintf(msg + n, len - n, |
| " correrrcnt[%.4x %.4x %.4x %.4x %.4x %.4x %.4x %.4x]", |
| corr0 & 0xffff, corr0 >> 16, |
| corr1 & 0xffff, corr1 >> 16, |
| corr2 & 0xffff, corr2 >> 16, |
| corr3 & 0xffff, corr3 >> 16); |
| |
| /* Clear status bits */ |
| if (retry_rd_err_log == 2 && (log0 & RETRY_RD_ERR_LOG_OVER_UC_V)) { |
| log0 &= ~RETRY_RD_ERR_LOG_OVER_UC_V; |
| I10NM_SET_REG32(imc, res->channel, offsets[0], log0); |
| } |
| } |
| |
| static struct pci_dev *pci_get_dev_wrapper(int dom, unsigned int bus, |
| unsigned int dev, unsigned int fun) |
| { |
| struct pci_dev *pdev; |
| |
| pdev = pci_get_domain_bus_and_slot(dom, bus, PCI_DEVFN(dev, fun)); |
| if (!pdev) { |
| edac_dbg(2, "No device %02x:%02x.%x\n", |
| bus, dev, fun); |
| return NULL; |
| } |
| |
| if (unlikely(pci_enable_device(pdev) < 0)) { |
| edac_dbg(2, "Failed to enable device %02x:%02x.%x\n", |
| bus, dev, fun); |
| return NULL; |
| } |
| |
| pci_dev_get(pdev); |
| |
| return pdev; |
| } |
| |
| static bool i10nm_check_2lm(struct res_config *cfg) |
| { |
| struct skx_dev *d; |
| u32 reg; |
| int i; |
| |
| list_for_each_entry(d, i10nm_edac_list, list) { |
| d->sad_all = pci_get_dev_wrapper(d->seg, d->bus[1], |
| PCI_SLOT(cfg->sad_all_devfn), |
| PCI_FUNC(cfg->sad_all_devfn)); |
| if (!d->sad_all) |
| continue; |
| |
| for (i = 0; i < I10NM_MAX_SAD; i++) { |
| I10NM_GET_SAD(d, cfg->sad_all_offset, i, reg); |
| if (I10NM_SAD_ENABLE(reg) && I10NM_SAD_NM_CACHEABLE(reg)) { |
| edac_dbg(2, "2-level memory configuration.\n"); |
| return true; |
| } |
| } |
| } |
| |
| return false; |
| } |
| |
| static int i10nm_get_ddr_munits(void) |
| { |
| struct pci_dev *mdev; |
| void __iomem *mbase; |
| unsigned long size; |
| struct skx_dev *d; |
| int i, j = 0; |
| u32 reg, off; |
| u64 base; |
| |
| list_for_each_entry(d, i10nm_edac_list, list) { |
| d->util_all = pci_get_dev_wrapper(d->seg, d->bus[1], 29, 1); |
| if (!d->util_all) |
| return -ENODEV; |
| |
| d->uracu = pci_get_dev_wrapper(d->seg, d->bus[0], 0, 1); |
| if (!d->uracu) |
| return -ENODEV; |
| |
| if (I10NM_GET_SCK_BAR(d, reg)) { |
| i10nm_printk(KERN_ERR, "Failed to socket bar\n"); |
| return -ENODEV; |
| } |
| |
| base = I10NM_GET_SCK_MMIO_BASE(reg); |
| edac_dbg(2, "socket%d mmio base 0x%llx (reg 0x%x)\n", |
| j++, base, reg); |
| |
| for (i = 0; i < I10NM_NUM_DDR_IMC; i++) { |
| mdev = pci_get_dev_wrapper(d->seg, d->bus[0], |
| 12 + i, 0); |
| if (i == 0 && !mdev) { |
| i10nm_printk(KERN_ERR, "No IMC found\n"); |
| return -ENODEV; |
| } |
| if (!mdev) |
| continue; |
| |
| d->imc[i].mdev = mdev; |
| |
| if (I10NM_GET_IMC_BAR(d, i, reg)) { |
| i10nm_printk(KERN_ERR, "Failed to get mc bar\n"); |
| return -ENODEV; |
| } |
| |
| off = I10NM_GET_IMC_MMIO_OFFSET(reg); |
| size = I10NM_GET_IMC_MMIO_SIZE(reg); |
| edac_dbg(2, "mc%d mmio base 0x%llx size 0x%lx (reg 0x%x)\n", |
| i, base + off, size, reg); |
| |
| mbase = ioremap(base + off, size); |
| if (!mbase) { |
| i10nm_printk(KERN_ERR, "Failed to ioremap 0x%llx\n", |
| base + off); |
| return -ENODEV; |
| } |
| |
| d->imc[i].mbase = mbase; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static bool i10nm_check_hbm_imc(struct skx_dev *d) |
| { |
| u32 reg; |
| |
| if (I10NM_GET_CAPID3_CFG(d, reg)) { |
| i10nm_printk(KERN_ERR, "Failed to get capid3_cfg\n"); |
| return false; |
| } |
| |
| return I10NM_IS_HBM_PRESENT(reg) != 0; |
| } |
| |
| static int i10nm_get_hbm_munits(void) |
| { |
| struct pci_dev *mdev; |
| void __iomem *mbase; |
| u32 reg, off, mcmtr; |
| struct skx_dev *d; |
| int i, lmc; |
| u64 base; |
| |
| list_for_each_entry(d, i10nm_edac_list, list) { |
| d->pcu_cr3 = pci_get_dev_wrapper(d->seg, d->bus[1], 30, 3); |
| if (!d->pcu_cr3) |
| return -ENODEV; |
| |
| if (!i10nm_check_hbm_imc(d)) { |
| i10nm_printk(KERN_DEBUG, "No hbm memory\n"); |
| return -ENODEV; |
| } |
| |
| if (I10NM_GET_SCK_BAR(d, reg)) { |
| i10nm_printk(KERN_ERR, "Failed to get socket bar\n"); |
| return -ENODEV; |
| } |
| base = I10NM_GET_SCK_MMIO_BASE(reg); |
| |
| if (I10NM_GET_HBM_IMC_BAR(d, reg)) { |
| i10nm_printk(KERN_ERR, "Failed to get hbm mc bar\n"); |
| return -ENODEV; |
| } |
| base += I10NM_GET_HBM_IMC_MMIO_OFFSET(reg); |
| |
| lmc = I10NM_NUM_DDR_IMC; |
| |
| for (i = 0; i < I10NM_NUM_HBM_IMC; i++) { |
| mdev = pci_get_dev_wrapper(d->seg, d->bus[0], |
| 12 + i / 4, 1 + i % 4); |
| if (i == 0 && !mdev) { |
| i10nm_printk(KERN_ERR, "No hbm mc found\n"); |
| return -ENODEV; |
| } |
| if (!mdev) |
| continue; |
| |
| d->imc[lmc].mdev = mdev; |
| off = i * I10NM_HBM_IMC_MMIO_SIZE; |
| |
| edac_dbg(2, "hbm mc%d mmio base 0x%llx size 0x%x\n", |
| lmc, base + off, I10NM_HBM_IMC_MMIO_SIZE); |
| |
| mbase = ioremap(base + off, I10NM_HBM_IMC_MMIO_SIZE); |
| if (!mbase) { |
| pci_dev_put(d->imc[lmc].mdev); |
| d->imc[lmc].mdev = NULL; |
| |
| i10nm_printk(KERN_ERR, "Failed to ioremap for hbm mc 0x%llx\n", |
| base + off); |
| return -ENOMEM; |
| } |
| |
| d->imc[lmc].mbase = mbase; |
| d->imc[lmc].hbm_mc = true; |
| |
| mcmtr = I10NM_GET_MCMTR(&d->imc[lmc], 0); |
| if (!I10NM_IS_HBM_IMC(mcmtr)) { |
| iounmap(d->imc[lmc].mbase); |
| d->imc[lmc].mbase = NULL; |
| d->imc[lmc].hbm_mc = false; |
| pci_dev_put(d->imc[lmc].mdev); |
| d->imc[lmc].mdev = NULL; |
| |
| i10nm_printk(KERN_ERR, "This isn't an hbm mc!\n"); |
| return -ENODEV; |
| } |
| |
| lmc++; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct res_config i10nm_cfg0 = { |
| .type = I10NM, |
| .decs_did = 0x3452, |
| .busno_cfg_offset = 0xcc, |
| .ddr_chan_mmio_sz = 0x4000, |
| .sad_all_devfn = PCI_DEVFN(29, 0), |
| .sad_all_offset = 0x108, |
| .offsets_scrub = offsets_scrub_icx, |
| .offsets_demand = offsets_demand_icx, |
| }; |
| |
| static struct res_config i10nm_cfg1 = { |
| .type = I10NM, |
| .decs_did = 0x3452, |
| .busno_cfg_offset = 0xd0, |
| .ddr_chan_mmio_sz = 0x4000, |
| .sad_all_devfn = PCI_DEVFN(29, 0), |
| .sad_all_offset = 0x108, |
| .offsets_scrub = offsets_scrub_icx, |
| .offsets_demand = offsets_demand_icx, |
| }; |
| |
| static struct res_config spr_cfg = { |
| .type = SPR, |
| .decs_did = 0x3252, |
| .busno_cfg_offset = 0xd0, |
| .ddr_chan_mmio_sz = 0x8000, |
| .hbm_chan_mmio_sz = 0x4000, |
| .support_ddr5 = true, |
| .sad_all_devfn = PCI_DEVFN(10, 0), |
| .sad_all_offset = 0x300, |
| .offsets_scrub = offsets_scrub_spr, |
| .offsets_demand = offsets_demand_spr, |
| }; |
| |
| static const struct x86_cpu_id i10nm_cpuids[] = { |
| X86_MATCH_INTEL_FAM6_MODEL_STEPPINGS(ATOM_TREMONT_D, X86_STEPPINGS(0x0, 0x3), &i10nm_cfg0), |
| X86_MATCH_INTEL_FAM6_MODEL_STEPPINGS(ATOM_TREMONT_D, X86_STEPPINGS(0x4, 0xf), &i10nm_cfg1), |
| X86_MATCH_INTEL_FAM6_MODEL_STEPPINGS(ICELAKE_X, X86_STEPPINGS(0x0, 0x3), &i10nm_cfg0), |
| X86_MATCH_INTEL_FAM6_MODEL_STEPPINGS(ICELAKE_X, X86_STEPPINGS(0x4, 0xf), &i10nm_cfg1), |
| X86_MATCH_INTEL_FAM6_MODEL_STEPPINGS(ICELAKE_D, X86_STEPPINGS(0x0, 0xf), &i10nm_cfg1), |
| X86_MATCH_INTEL_FAM6_MODEL_STEPPINGS(SAPPHIRERAPIDS_X, X86_STEPPINGS(0x0, 0xf), &spr_cfg), |
| {} |
| }; |
| MODULE_DEVICE_TABLE(x86cpu, i10nm_cpuids); |
| |
| static bool i10nm_check_ecc(struct skx_imc *imc, int chan) |
| { |
| u32 mcmtr; |
| |
| mcmtr = I10NM_GET_MCMTR(imc, chan); |
| edac_dbg(1, "ch%d mcmtr reg %x\n", chan, mcmtr); |
| |
| return !!GET_BITFIELD(mcmtr, 2, 2); |
| } |
| |
| static int i10nm_get_dimm_config(struct mem_ctl_info *mci, |
| struct res_config *cfg) |
| { |
| struct skx_pvt *pvt = mci->pvt_info; |
| struct skx_imc *imc = pvt->imc; |
| u32 mtr, amap, mcddrtcfg; |
| struct dimm_info *dimm; |
| int i, j, ndimms; |
| |
| for (i = 0; i < imc->num_channels; i++) { |
| if (!imc->mbase) |
| continue; |
| |
| ndimms = 0; |
| amap = I10NM_GET_AMAP(imc, i); |
| mcddrtcfg = I10NM_GET_MCDDRTCFG(imc, i); |
| for (j = 0; j < imc->num_dimms; j++) { |
| dimm = edac_get_dimm(mci, i, j, 0); |
| mtr = I10NM_GET_DIMMMTR(imc, i, j); |
| edac_dbg(1, "dimmmtr 0x%x mcddrtcfg 0x%x (mc%d ch%d dimm%d)\n", |
| mtr, mcddrtcfg, imc->mc, i, j); |
| |
| if (IS_DIMM_PRESENT(mtr)) |
| ndimms += skx_get_dimm_info(mtr, 0, amap, dimm, |
| imc, i, j, cfg); |
| else if (IS_NVDIMM_PRESENT(mcddrtcfg, j)) |
| ndimms += skx_get_nvdimm_info(dimm, imc, i, j, |
| EDAC_MOD_STR); |
| } |
| if (ndimms && !i10nm_check_ecc(imc, i)) { |
| i10nm_printk(KERN_ERR, "ECC is disabled on imc %d channel %d\n", |
| imc->mc, i); |
| return -ENODEV; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct notifier_block i10nm_mce_dec = { |
| .notifier_call = skx_mce_check_error, |
| .priority = MCE_PRIO_EDAC, |
| }; |
| |
| #ifdef CONFIG_EDAC_DEBUG |
| /* |
| * Debug feature. |
| * Exercise the address decode logic by writing an address to |
| * /sys/kernel/debug/edac/i10nm_test/addr. |
| */ |
| static struct dentry *i10nm_test; |
| |
| static int debugfs_u64_set(void *data, u64 val) |
| { |
| struct mce m; |
| |
| pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val); |
| |
| memset(&m, 0, sizeof(m)); |
| /* ADDRV + MemRd + Unknown channel */ |
| m.status = MCI_STATUS_ADDRV + 0x90; |
| /* One corrected error */ |
| m.status |= BIT_ULL(MCI_STATUS_CEC_SHIFT); |
| m.addr = val; |
| skx_mce_check_error(NULL, 0, &m); |
| |
| return 0; |
| } |
| DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n"); |
| |
| static void setup_i10nm_debug(void) |
| { |
| i10nm_test = edac_debugfs_create_dir("i10nm_test"); |
| if (!i10nm_test) |
| return; |
| |
| if (!edac_debugfs_create_file("addr", 0200, i10nm_test, |
| NULL, &fops_u64_wo)) { |
| debugfs_remove(i10nm_test); |
| i10nm_test = NULL; |
| } |
| } |
| |
| static void teardown_i10nm_debug(void) |
| { |
| debugfs_remove_recursive(i10nm_test); |
| } |
| #else |
| static inline void setup_i10nm_debug(void) {} |
| static inline void teardown_i10nm_debug(void) {} |
| #endif /*CONFIG_EDAC_DEBUG*/ |
| |
| static int __init i10nm_init(void) |
| { |
| u8 mc = 0, src_id = 0, node_id = 0; |
| const struct x86_cpu_id *id; |
| struct res_config *cfg; |
| const char *owner; |
| struct skx_dev *d; |
| int rc, i, off[3] = {0xd0, 0xc8, 0xcc}; |
| u64 tolm, tohm; |
| |
| edac_dbg(2, "\n"); |
| |
| owner = edac_get_owner(); |
| if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR))) |
| return -EBUSY; |
| |
| if (cpu_feature_enabled(X86_FEATURE_HYPERVISOR)) |
| return -ENODEV; |
| |
| id = x86_match_cpu(i10nm_cpuids); |
| if (!id) |
| return -ENODEV; |
| |
| cfg = (struct res_config *)id->driver_data; |
| res_cfg = cfg; |
| |
| rc = skx_get_hi_lo(0x09a2, off, &tolm, &tohm); |
| if (rc) |
| return rc; |
| |
| rc = skx_get_all_bus_mappings(cfg, &i10nm_edac_list); |
| if (rc < 0) |
| goto fail; |
| if (rc == 0) { |
| i10nm_printk(KERN_ERR, "No memory controllers found\n"); |
| return -ENODEV; |
| } |
| |
| skx_set_mem_cfg(i10nm_check_2lm(cfg)); |
| |
| rc = i10nm_get_ddr_munits(); |
| |
| if (i10nm_get_hbm_munits() && rc) |
| goto fail; |
| |
| list_for_each_entry(d, i10nm_edac_list, list) { |
| rc = skx_get_src_id(d, 0xf8, &src_id); |
| if (rc < 0) |
| goto fail; |
| |
| rc = skx_get_node_id(d, &node_id); |
| if (rc < 0) |
| goto fail; |
| |
| edac_dbg(2, "src_id = %d node_id = %d\n", src_id, node_id); |
| for (i = 0; i < I10NM_NUM_IMC; i++) { |
| if (!d->imc[i].mdev) |
| continue; |
| |
| d->imc[i].mc = mc++; |
| d->imc[i].lmc = i; |
| d->imc[i].src_id = src_id; |
| d->imc[i].node_id = node_id; |
| if (d->imc[i].hbm_mc) { |
| d->imc[i].chan_mmio_sz = cfg->hbm_chan_mmio_sz; |
| d->imc[i].num_channels = I10NM_NUM_HBM_CHANNELS; |
| d->imc[i].num_dimms = I10NM_NUM_HBM_DIMMS; |
| } else { |
| d->imc[i].chan_mmio_sz = cfg->ddr_chan_mmio_sz; |
| d->imc[i].num_channels = I10NM_NUM_DDR_CHANNELS; |
| d->imc[i].num_dimms = I10NM_NUM_DDR_DIMMS; |
| } |
| |
| rc = skx_register_mci(&d->imc[i], d->imc[i].mdev, |
| "Intel_10nm Socket", EDAC_MOD_STR, |
| i10nm_get_dimm_config, cfg); |
| if (rc < 0) |
| goto fail; |
| } |
| } |
| |
| rc = skx_adxl_get(); |
| if (rc) |
| goto fail; |
| |
| opstate_init(); |
| mce_register_decode_chain(&i10nm_mce_dec); |
| setup_i10nm_debug(); |
| |
| if (retry_rd_err_log && res_cfg->offsets_scrub && res_cfg->offsets_demand) { |
| skx_set_decode(NULL, show_retry_rd_err_log); |
| if (retry_rd_err_log == 2) |
| enable_retry_rd_err_log(true); |
| } |
| |
| i10nm_printk(KERN_INFO, "%s\n", I10NM_REVISION); |
| |
| return 0; |
| fail: |
| skx_remove(); |
| return rc; |
| } |
| |
| static void __exit i10nm_exit(void) |
| { |
| edac_dbg(2, "\n"); |
| |
| if (retry_rd_err_log && res_cfg->offsets_scrub && res_cfg->offsets_demand) { |
| skx_set_decode(NULL, NULL); |
| if (retry_rd_err_log == 2) |
| enable_retry_rd_err_log(false); |
| } |
| |
| teardown_i10nm_debug(); |
| mce_unregister_decode_chain(&i10nm_mce_dec); |
| skx_adxl_put(); |
| skx_remove(); |
| } |
| |
| module_init(i10nm_init); |
| module_exit(i10nm_exit); |
| |
| module_param(retry_rd_err_log, int, 0444); |
| MODULE_PARM_DESC(retry_rd_err_log, "retry_rd_err_log: 0=off(default), 1=bios(Linux doesn't reset any control bits, but just reports values.), 2=linux(Linux tries to take control and resets mode bits, clear valid/UC bits after reading.)"); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("MC Driver for Intel 10nm server processors"); |