| /* |
| * Copyright (C) 2013 Imagination Technologies |
| * Author: Paul Burton <paul.burton@imgtec.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/percpu.h> |
| #include <linux/spinlock.h> |
| |
| #include <asm/mips-cm.h> |
| #include <asm/mipsregs.h> |
| |
| void __iomem *mips_cm_base; |
| void __iomem *mips_cm_l2sync_base; |
| int mips_cm_is64; |
| |
| static char *cm2_tr[8] = { |
| "mem", "gcr", "gic", "mmio", |
| "0x04", "cpc", "0x06", "0x07" |
| }; |
| |
| /* CM3 Tag ECC transation type */ |
| static char *cm3_tr[16] = { |
| [0x0] = "ReqNoData", |
| [0x1] = "0x1", |
| [0x2] = "ReqWData", |
| [0x3] = "0x3", |
| [0x4] = "IReqNoResp", |
| [0x5] = "IReqWResp", |
| [0x6] = "IReqNoRespDat", |
| [0x7] = "IReqWRespDat", |
| [0x8] = "RespNoData", |
| [0x9] = "RespDataFol", |
| [0xa] = "RespWData", |
| [0xb] = "RespDataOnly", |
| [0xc] = "IRespNoData", |
| [0xd] = "IRespDataFol", |
| [0xe] = "IRespWData", |
| [0xf] = "IRespDataOnly" |
| }; |
| |
| static char *cm2_cmd[32] = { |
| [0x00] = "0x00", |
| [0x01] = "Legacy Write", |
| [0x02] = "Legacy Read", |
| [0x03] = "0x03", |
| [0x04] = "0x04", |
| [0x05] = "0x05", |
| [0x06] = "0x06", |
| [0x07] = "0x07", |
| [0x08] = "Coherent Read Own", |
| [0x09] = "Coherent Read Share", |
| [0x0a] = "Coherent Read Discard", |
| [0x0b] = "Coherent Ready Share Always", |
| [0x0c] = "Coherent Upgrade", |
| [0x0d] = "Coherent Writeback", |
| [0x0e] = "0x0e", |
| [0x0f] = "0x0f", |
| [0x10] = "Coherent Copyback", |
| [0x11] = "Coherent Copyback Invalidate", |
| [0x12] = "Coherent Invalidate", |
| [0x13] = "Coherent Write Invalidate", |
| [0x14] = "Coherent Completion Sync", |
| [0x15] = "0x15", |
| [0x16] = "0x16", |
| [0x17] = "0x17", |
| [0x18] = "0x18", |
| [0x19] = "0x19", |
| [0x1a] = "0x1a", |
| [0x1b] = "0x1b", |
| [0x1c] = "0x1c", |
| [0x1d] = "0x1d", |
| [0x1e] = "0x1e", |
| [0x1f] = "0x1f" |
| }; |
| |
| /* CM3 Tag ECC command type */ |
| static char *cm3_cmd[16] = { |
| [0x0] = "Legacy Read", |
| [0x1] = "Legacy Write", |
| [0x2] = "Coherent Read Own", |
| [0x3] = "Coherent Read Share", |
| [0x4] = "Coherent Read Discard", |
| [0x5] = "Coherent Evicted", |
| [0x6] = "Coherent Upgrade", |
| [0x7] = "Coherent Upgrade for Store Conditional", |
| [0x8] = "Coherent Writeback", |
| [0x9] = "Coherent Write Invalidate", |
| [0xa] = "0xa", |
| [0xb] = "0xb", |
| [0xc] = "0xc", |
| [0xd] = "0xd", |
| [0xe] = "0xe", |
| [0xf] = "0xf" |
| }; |
| |
| /* CM3 Tag ECC command group */ |
| static char *cm3_cmd_group[8] = { |
| [0x0] = "Normal", |
| [0x1] = "Registers", |
| [0x2] = "TLB", |
| [0x3] = "0x3", |
| [0x4] = "L1I", |
| [0x5] = "L1D", |
| [0x6] = "L3", |
| [0x7] = "L2" |
| }; |
| |
| static char *cm2_core[8] = { |
| "Invalid/OK", "Invalid/Data", |
| "Shared/OK", "Shared/Data", |
| "Modified/OK", "Modified/Data", |
| "Exclusive/OK", "Exclusive/Data" |
| }; |
| |
| static char *cm2_causes[32] = { |
| "None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR", |
| "COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07", |
| "0x08", "0x09", "0x0a", "0x0b", |
| "0x0c", "0x0d", "0x0e", "0x0f", |
| "0x10", "0x11", "0x12", "0x13", |
| "0x14", "0x15", "0x16", "INTVN_WR_ERR", |
| "INTVN_RD_ERR", "0x19", "0x1a", "0x1b", |
| "0x1c", "0x1d", "0x1e", "0x1f" |
| }; |
| |
| static char *cm3_causes[32] = { |
| "0x0", "MP_CORRECTABLE_ECC_ERR", "MP_REQUEST_DECODE_ERR", |
| "MP_UNCORRECTABLE_ECC_ERR", "MP_PARITY_ERR", "MP_COHERENCE_ERR", |
| "CMBIU_REQUEST_DECODE_ERR", "CMBIU_PARITY_ERR", "CMBIU_AXI_RESP_ERR", |
| "0x9", "RBI_BUS_ERR", "0xb", "0xc", "0xd", "0xe", "0xf", "0x10", |
| "0x11", "0x12", "0x13", "0x14", "0x15", "0x16", "0x17", "0x18", |
| "0x19", "0x1a", "0x1b", "0x1c", "0x1d", "0x1e", "0x1f" |
| }; |
| |
| static DEFINE_PER_CPU_ALIGNED(spinlock_t, cm_core_lock); |
| static DEFINE_PER_CPU_ALIGNED(unsigned long, cm_core_lock_flags); |
| |
| phys_addr_t __mips_cm_phys_base(void) |
| { |
| u32 config3 = read_c0_config3(); |
| unsigned long cmgcr; |
| |
| /* Check the CMGCRBase register is implemented */ |
| if (!(config3 & MIPS_CONF3_CMGCR)) |
| return 0; |
| |
| /* Read the address from CMGCRBase */ |
| cmgcr = read_c0_cmgcrbase(); |
| return (cmgcr & MIPS_CMGCRF_BASE) << (36 - 32); |
| } |
| |
| phys_addr_t mips_cm_phys_base(void) |
| __attribute__((weak, alias("__mips_cm_phys_base"))); |
| |
| phys_addr_t __mips_cm_l2sync_phys_base(void) |
| { |
| u32 base_reg; |
| |
| /* |
| * If the L2-only sync region is already enabled then leave it at it's |
| * current location. |
| */ |
| base_reg = read_gcr_l2_only_sync_base(); |
| if (base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_MSK) |
| return base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_MSK; |
| |
| /* Default to following the CM */ |
| return mips_cm_phys_base() + MIPS_CM_GCR_SIZE; |
| } |
| |
| phys_addr_t mips_cm_l2sync_phys_base(void) |
| __attribute__((weak, alias("__mips_cm_l2sync_phys_base"))); |
| |
| static void mips_cm_probe_l2sync(void) |
| { |
| unsigned major_rev; |
| phys_addr_t addr; |
| |
| /* L2-only sync was introduced with CM major revision 6 */ |
| major_rev = (read_gcr_rev() & CM_GCR_REV_MAJOR_MSK) >> |
| CM_GCR_REV_MAJOR_SHF; |
| if (major_rev < 6) |
| return; |
| |
| /* Find a location for the L2 sync region */ |
| addr = mips_cm_l2sync_phys_base(); |
| BUG_ON((addr & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_MSK) != addr); |
| if (!addr) |
| return; |
| |
| /* Set the region base address & enable it */ |
| write_gcr_l2_only_sync_base(addr | CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_MSK); |
| |
| /* Map the region */ |
| mips_cm_l2sync_base = ioremap_nocache(addr, MIPS_CM_L2SYNC_SIZE); |
| } |
| |
| int mips_cm_probe(void) |
| { |
| phys_addr_t addr; |
| u32 base_reg; |
| unsigned cpu; |
| |
| /* |
| * No need to probe again if we have already been |
| * here before. |
| */ |
| if (mips_cm_base) |
| return 0; |
| |
| addr = mips_cm_phys_base(); |
| BUG_ON((addr & CM_GCR_BASE_GCRBASE_MSK) != addr); |
| if (!addr) |
| return -ENODEV; |
| |
| mips_cm_base = ioremap_nocache(addr, MIPS_CM_GCR_SIZE); |
| if (!mips_cm_base) |
| return -ENXIO; |
| |
| /* sanity check that we're looking at a CM */ |
| base_reg = read_gcr_base(); |
| if ((base_reg & CM_GCR_BASE_GCRBASE_MSK) != addr) { |
| pr_err("GCRs appear to have been moved (expected them at 0x%08lx)!\n", |
| (unsigned long)addr); |
| mips_cm_base = NULL; |
| return -ENODEV; |
| } |
| |
| /* set default target to memory */ |
| base_reg &= ~CM_GCR_BASE_CMDEFTGT_MSK; |
| base_reg |= CM_GCR_BASE_CMDEFTGT_MEM; |
| write_gcr_base(base_reg); |
| |
| /* disable CM regions */ |
| write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR_MSK); |
| write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); |
| write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR_MSK); |
| write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); |
| write_gcr_reg2_base(CM_GCR_REGn_BASE_BASEADDR_MSK); |
| write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); |
| write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR_MSK); |
| write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); |
| |
| /* probe for an L2-only sync region */ |
| mips_cm_probe_l2sync(); |
| |
| /* determine register width for this CM */ |
| mips_cm_is64 = config_enabled(CONFIG_64BIT) && (mips_cm_revision() >= CM_REV_CM3); |
| |
| for_each_possible_cpu(cpu) |
| spin_lock_init(&per_cpu(cm_core_lock, cpu)); |
| |
| return 0; |
| } |
| |
| void mips_cm_lock_other(unsigned int core, unsigned int vp) |
| { |
| unsigned curr_core; |
| u32 val; |
| |
| preempt_disable(); |
| curr_core = current_cpu_data.core; |
| spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core), |
| per_cpu(cm_core_lock_flags, curr_core)); |
| |
| if (mips_cm_revision() >= CM_REV_CM3) { |
| val = core << CM3_GCR_Cx_OTHER_CORE_SHF; |
| val |= vp << CM3_GCR_Cx_OTHER_VP_SHF; |
| } else { |
| BUG_ON(vp != 0); |
| val = core << CM_GCR_Cx_OTHER_CORENUM_SHF; |
| } |
| |
| write_gcr_cl_other(val); |
| |
| /* |
| * Ensure the core-other region reflects the appropriate core & |
| * VP before any accesses to it occur. |
| */ |
| mb(); |
| } |
| |
| void mips_cm_unlock_other(void) |
| { |
| unsigned curr_core = current_cpu_data.core; |
| |
| spin_unlock_irqrestore(&per_cpu(cm_core_lock, curr_core), |
| per_cpu(cm_core_lock_flags, curr_core)); |
| preempt_enable(); |
| } |
| |
| void mips_cm_error_report(void) |
| { |
| u64 cm_error, cm_addr, cm_other; |
| unsigned long revision; |
| int ocause, cause; |
| char buf[256]; |
| |
| if (!mips_cm_present()) |
| return; |
| |
| revision = mips_cm_revision(); |
| |
| if (revision < CM_REV_CM3) { /* CM2 */ |
| cm_error = read_gcr_error_cause(); |
| cm_addr = read_gcr_error_addr(); |
| cm_other = read_gcr_error_mult(); |
| cause = cm_error >> CM_GCR_ERROR_CAUSE_ERRTYPE_SHF; |
| ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF; |
| |
| if (!cause) |
| return; |
| |
| if (cause < 16) { |
| unsigned long cca_bits = (cm_error >> 15) & 7; |
| unsigned long tr_bits = (cm_error >> 12) & 7; |
| unsigned long cmd_bits = (cm_error >> 7) & 0x1f; |
| unsigned long stag_bits = (cm_error >> 3) & 15; |
| unsigned long sport_bits = (cm_error >> 0) & 7; |
| |
| snprintf(buf, sizeof(buf), |
| "CCA=%lu TR=%s MCmd=%s STag=%lu " |
| "SPort=%lu\n", cca_bits, cm2_tr[tr_bits], |
| cm2_cmd[cmd_bits], stag_bits, sport_bits); |
| } else { |
| /* glob state & sresp together */ |
| unsigned long c3_bits = (cm_error >> 18) & 7; |
| unsigned long c2_bits = (cm_error >> 15) & 7; |
| unsigned long c1_bits = (cm_error >> 12) & 7; |
| unsigned long c0_bits = (cm_error >> 9) & 7; |
| unsigned long sc_bit = (cm_error >> 8) & 1; |
| unsigned long cmd_bits = (cm_error >> 3) & 0x1f; |
| unsigned long sport_bits = (cm_error >> 0) & 7; |
| |
| snprintf(buf, sizeof(buf), |
| "C3=%s C2=%s C1=%s C0=%s SC=%s " |
| "MCmd=%s SPort=%lu\n", |
| cm2_core[c3_bits], cm2_core[c2_bits], |
| cm2_core[c1_bits], cm2_core[c0_bits], |
| sc_bit ? "True" : "False", |
| cm2_cmd[cmd_bits], sport_bits); |
| } |
| pr_err("CM_ERROR=%08llx %s <%s>\n", cm_error, |
| cm2_causes[cause], buf); |
| pr_err("CM_ADDR =%08llx\n", cm_addr); |
| pr_err("CM_OTHER=%08llx %s\n", cm_other, cm2_causes[ocause]); |
| } else { /* CM3 */ |
| ulong core_id_bits, vp_id_bits, cmd_bits, cmd_group_bits; |
| ulong cm3_cca_bits, mcp_bits, cm3_tr_bits, sched_bit; |
| |
| cm_error = read64_gcr_error_cause(); |
| cm_addr = read64_gcr_error_addr(); |
| cm_other = read64_gcr_error_mult(); |
| cause = cm_error >> CM3_GCR_ERROR_CAUSE_ERRTYPE_SHF; |
| ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF; |
| |
| if (!cause) |
| return; |
| |
| /* Used by cause == {1,2,3} */ |
| core_id_bits = (cm_error >> 22) & 0xf; |
| vp_id_bits = (cm_error >> 18) & 0xf; |
| cmd_bits = (cm_error >> 14) & 0xf; |
| cmd_group_bits = (cm_error >> 11) & 0xf; |
| cm3_cca_bits = (cm_error >> 8) & 7; |
| mcp_bits = (cm_error >> 5) & 0xf; |
| cm3_tr_bits = (cm_error >> 1) & 0xf; |
| sched_bit = cm_error & 0x1; |
| |
| if (cause == 1 || cause == 3) { /* Tag ECC */ |
| unsigned long tag_ecc = (cm_error >> 57) & 0x1; |
| unsigned long tag_way_bits = (cm_error >> 29) & 0xffff; |
| unsigned long dword_bits = (cm_error >> 49) & 0xff; |
| unsigned long data_way_bits = (cm_error >> 45) & 0xf; |
| unsigned long data_sets_bits = (cm_error >> 29) & 0xfff; |
| unsigned long bank_bit = (cm_error >> 28) & 0x1; |
| snprintf(buf, sizeof(buf), |
| "%s ECC Error: Way=%lu (DWORD=%lu, Sets=%lu)" |
| "Bank=%lu CoreID=%lu VPID=%lu Command=%s" |
| "Command Group=%s CCA=%lu MCP=%d" |
| "Transaction type=%s Scheduler=%lu\n", |
| tag_ecc ? "TAG" : "DATA", |
| tag_ecc ? (unsigned long)ffs(tag_way_bits) - 1 : |
| data_way_bits, bank_bit, dword_bits, |
| data_sets_bits, |
| core_id_bits, vp_id_bits, |
| cm3_cmd[cmd_bits], |
| cm3_cmd_group[cmd_group_bits], |
| cm3_cca_bits, 1 << mcp_bits, |
| cm3_tr[cm3_tr_bits], sched_bit); |
| } else if (cause == 2) { |
| unsigned long data_error_type = (cm_error >> 41) & 0xfff; |
| unsigned long data_decode_cmd = (cm_error >> 37) & 0xf; |
| unsigned long data_decode_group = (cm_error >> 34) & 0x7; |
| unsigned long data_decode_destination_id = (cm_error >> 28) & 0x3f; |
| |
| snprintf(buf, sizeof(buf), |
| "Decode Request Error: Type=%lu, Command=%lu" |
| "Command Group=%lu Destination ID=%lu" |
| "CoreID=%lu VPID=%lu Command=%s" |
| "Command Group=%s CCA=%lu MCP=%d" |
| "Transaction type=%s Scheduler=%lu\n", |
| data_error_type, data_decode_cmd, |
| data_decode_group, data_decode_destination_id, |
| core_id_bits, vp_id_bits, |
| cm3_cmd[cmd_bits], |
| cm3_cmd_group[cmd_group_bits], |
| cm3_cca_bits, 1 << mcp_bits, |
| cm3_tr[cm3_tr_bits], sched_bit); |
| } else { |
| buf[0] = 0; |
| } |
| |
| pr_err("CM_ERROR=%llx %s <%s>\n", cm_error, |
| cm3_causes[cause], buf); |
| pr_err("CM_ADDR =%llx\n", cm_addr); |
| pr_err("CM_OTHER=%llx %s\n", cm_other, cm3_causes[ocause]); |
| } |
| |
| /* reprime cause register */ |
| write_gcr_error_cause(0); |
| } |