| /* |
| * ARC CPU startup Code |
| * |
| * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Vineetg: Dec 2007 |
| * -Check if we are running on Simulator or on real hardware |
| * to skip certain things during boot on simulator |
| */ |
| |
| #include <linux/linkage.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/entry.h> |
| #include <asm/arcregs.h> |
| #include <asm/cache.h> |
| |
| .macro CPU_EARLY_SETUP |
| |
| ; Setting up Vectror Table (in case exception happens in early boot |
| sr @_int_vec_base_lds, [AUX_INTR_VEC_BASE] |
| |
| ; Disable I-cache/D-cache if kernel so configured |
| lr r5, [ARC_REG_IC_BCR] |
| breq r5, 0, 1f ; I$ doesn't exist |
| lr r5, [ARC_REG_IC_CTRL] |
| #ifdef CONFIG_ARC_HAS_ICACHE |
| bclr r5, r5, 0 ; 0 - Enable, 1 is Disable |
| #else |
| bset r5, r5, 0 ; I$ exists, but is not used |
| #endif |
| sr r5, [ARC_REG_IC_CTRL] |
| |
| 1: |
| lr r5, [ARC_REG_DC_BCR] |
| breq r5, 0, 1f ; D$ doesn't exist |
| lr r5, [ARC_REG_DC_CTRL] |
| bclr r5, r5, 6 ; Invalidate (discard w/o wback) |
| #ifdef CONFIG_ARC_HAS_DCACHE |
| bclr r5, r5, 0 ; Enable (+Inv) |
| #else |
| bset r5, r5, 0 ; Disable (+Inv) |
| #endif |
| sr r5, [ARC_REG_DC_CTRL] |
| |
| 1: |
| .endm |
| |
| .cpu A7 |
| |
| .section .init.text, "ax",@progbits |
| .type stext, @function |
| .globl stext |
| stext: |
| ;------------------------------------------------------------------- |
| ; Don't clobber r0-r2 yet. It might have bootloader provided info |
| ;------------------------------------------------------------------- |
| |
| CPU_EARLY_SETUP |
| |
| #ifdef CONFIG_SMP |
| ; Ensure Boot (Master) proceeds. Others wait in platform dependent way |
| ; IDENTITY Reg [ 3 2 1 0 ] |
| ; (cpu-id) ^^^ => Zero for UP ARC700 |
| ; => #Core-ID if SMP (Master 0) |
| ; Note that non-boot CPUs might not land here if halt-on-reset and |
| ; instead breath life from @first_lines_of_secondary, but we still |
| ; need to make sure only boot cpu takes this path. |
| GET_CPU_ID r5 |
| cmp r5, 0 |
| mov.ne r0, r5 |
| jne arc_platform_smp_wait_to_boot |
| #endif |
| ; Clear BSS before updating any globals |
| ; XXX: use ZOL here |
| mov r5, __bss_start |
| sub r6, __bss_stop, r5 |
| lsr.f lp_count, r6, 2 |
| lpnz 1f |
| st.ab 0, [r5, 4] |
| 1: |
| |
| #ifdef CONFIG_ARC_UBOOT_SUPPORT |
| ; Uboot - kernel ABI |
| ; r0 = [0] No uboot interaction, [1] cmdline in r2, [2] DTB in r2 |
| ; r1 = magic number (board identity, unused as of now |
| ; r2 = pointer to uboot provided cmdline or external DTB in mem |
| ; These are handled later in setup_arch() |
| st r0, [@uboot_tag] |
| st r2, [@uboot_arg] |
| #endif |
| |
| ; setup "current" tsk and optionally cache it in dedicated r25 |
| mov r9, @init_task |
| SET_CURR_TASK_ON_CPU r9, r0 ; r9 = tsk, r0 = scratch |
| |
| ; setup stack (fp, sp) |
| mov fp, 0 |
| |
| ; tsk->thread_info is really a PAGE, whose bottom hoists stack |
| GET_TSK_STACK_BASE r9, sp ; r9 = tsk, sp = stack base(output) |
| |
| j start_kernel ; "C" entry point |
| |
| #ifdef CONFIG_SMP |
| ;---------------------------------------------------------------- |
| ; First lines of code run by secondary before jumping to 'C' |
| ;---------------------------------------------------------------- |
| .section .text, "ax",@progbits |
| .type first_lines_of_secondary, @function |
| .globl first_lines_of_secondary |
| |
| first_lines_of_secondary: |
| |
| CPU_EARLY_SETUP |
| |
| ; setup per-cpu idle task as "current" on this CPU |
| ld r0, [@secondary_idle_tsk] |
| SET_CURR_TASK_ON_CPU r0, r1 |
| |
| ; setup stack (fp, sp) |
| mov fp, 0 |
| |
| ; set it's stack base to tsk->thread_info bottom |
| GET_TSK_STACK_BASE r0, sp |
| |
| j start_kernel_secondary |
| |
| #endif |
