| /* |
| Copyright (C) 2004 - 2008 rt2x00 SourceForge Project |
| <http://rt2x00.serialmonkey.com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the |
| Free Software Foundation, Inc., |
| 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| /* |
| Module: rt2x00usb |
| Abstract: rt2x00 generic usb device routines. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/usb.h> |
| #include <linux/bug.h> |
| |
| #include "rt2x00.h" |
| #include "rt2x00usb.h" |
| |
| /* |
| * Interfacing with the HW. |
| */ |
| int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, |
| const u8 request, const u8 requesttype, |
| const u16 offset, const u16 value, |
| void *buffer, const u16 buffer_length, |
| const int timeout) |
| { |
| struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); |
| int status; |
| unsigned int i; |
| unsigned int pipe = |
| (requesttype == USB_VENDOR_REQUEST_IN) ? |
| usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0); |
| |
| |
| for (i = 0; i < REGISTER_BUSY_COUNT; i++) { |
| status = usb_control_msg(usb_dev, pipe, request, requesttype, |
| value, offset, buffer, buffer_length, |
| timeout); |
| if (status >= 0) |
| return 0; |
| |
| /* |
| * Check for errors |
| * -ENODEV: Device has disappeared, no point continuing. |
| * All other errors: Try again. |
| */ |
| else if (status == -ENODEV) |
| break; |
| } |
| |
| ERROR(rt2x00dev, |
| "Vendor Request 0x%02x failed for offset 0x%04x with error %d.\n", |
| request, offset, status); |
| |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request); |
| |
| int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev, |
| const u8 request, const u8 requesttype, |
| const u16 offset, void *buffer, |
| const u16 buffer_length, const int timeout) |
| { |
| int status; |
| |
| BUG_ON(!mutex_is_locked(&rt2x00dev->usb_cache_mutex)); |
| |
| /* |
| * Check for Cache availability. |
| */ |
| if (unlikely(!rt2x00dev->csr.cache || buffer_length > CSR_CACHE_SIZE)) { |
| ERROR(rt2x00dev, "CSR cache not available.\n"); |
| return -ENOMEM; |
| } |
| |
| if (requesttype == USB_VENDOR_REQUEST_OUT) |
| memcpy(rt2x00dev->csr.cache, buffer, buffer_length); |
| |
| status = rt2x00usb_vendor_request(rt2x00dev, request, requesttype, |
| offset, 0, rt2x00dev->csr.cache, |
| buffer_length, timeout); |
| |
| if (!status && requesttype == USB_VENDOR_REQUEST_IN) |
| memcpy(buffer, rt2x00dev->csr.cache, buffer_length); |
| |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_vendor_req_buff_lock); |
| |
| int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev, |
| const u8 request, const u8 requesttype, |
| const u16 offset, void *buffer, |
| const u16 buffer_length, const int timeout) |
| { |
| int status; |
| |
| mutex_lock(&rt2x00dev->usb_cache_mutex); |
| |
| status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request, |
| requesttype, offset, buffer, |
| buffer_length, timeout); |
| |
| mutex_unlock(&rt2x00dev->usb_cache_mutex); |
| |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff); |
| |
| int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, |
| const u8 request, const u8 requesttype, |
| const u16 offset, const void *buffer, |
| const u16 buffer_length, |
| const int timeout) |
| { |
| int status = 0; |
| unsigned char *tb; |
| u16 off, len, bsize; |
| |
| mutex_lock(&rt2x00dev->usb_cache_mutex); |
| |
| tb = (char *)buffer; |
| off = offset; |
| len = buffer_length; |
| while (len && !status) { |
| bsize = min_t(u16, CSR_CACHE_SIZE, len); |
| status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request, |
| requesttype, off, tb, |
| bsize, timeout); |
| |
| tb += bsize; |
| len -= bsize; |
| off += bsize; |
| } |
| |
| mutex_unlock(&rt2x00dev->usb_cache_mutex); |
| |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff); |
| |
| /* |
| * TX data handlers. |
| */ |
| static void rt2x00usb_interrupt_txdone(struct urb *urb) |
| { |
| struct queue_entry *entry = (struct queue_entry *)urb->context; |
| struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; |
| struct txdone_entry_desc txdesc; |
| |
| if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || |
| !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) |
| return; |
| |
| /* |
| * Remove the descriptor data from the buffer. |
| */ |
| skb_pull(entry->skb, entry->queue->desc_size); |
| |
| /* |
| * Obtain the status about this packet. |
| * Note that when the status is 0 it does not mean the |
| * frame was send out correctly. It only means the frame |
| * was succesfully pushed to the hardware, we have no |
| * way to determine the transmission status right now. |
| * (Only indirectly by looking at the failed TX counters |
| * in the register). |
| */ |
| txdesc.flags = 0; |
| if (!urb->status) |
| __set_bit(TXDONE_UNKNOWN, &txdesc.flags); |
| else |
| __set_bit(TXDONE_FAILURE, &txdesc.flags); |
| txdesc.retry = 0; |
| |
| rt2x00lib_txdone(entry, &txdesc); |
| } |
| |
| int rt2x00usb_write_tx_data(struct queue_entry *entry) |
| { |
| struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; |
| struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); |
| struct queue_entry_priv_usb *entry_priv = entry->priv_data; |
| struct skb_frame_desc *skbdesc; |
| u32 length; |
| |
| /* |
| * Add the descriptor in front of the skb. |
| */ |
| skb_push(entry->skb, entry->queue->desc_size); |
| memset(entry->skb->data, 0, entry->queue->desc_size); |
| |
| /* |
| * Fill in skb descriptor |
| */ |
| skbdesc = get_skb_frame_desc(entry->skb); |
| skbdesc->desc = entry->skb->data; |
| skbdesc->desc_len = entry->queue->desc_size; |
| |
| /* |
| * USB devices cannot blindly pass the skb->len as the |
| * length of the data to usb_fill_bulk_urb. Pass the skb |
| * to the driver to determine what the length should be. |
| */ |
| length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, entry->skb); |
| |
| usb_fill_bulk_urb(entry_priv->urb, usb_dev, |
| usb_sndbulkpipe(usb_dev, 1), |
| entry->skb->data, length, |
| rt2x00usb_interrupt_txdone, entry); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data); |
| |
| static inline void rt2x00usb_kick_tx_entry(struct queue_entry *entry) |
| { |
| struct queue_entry_priv_usb *entry_priv = entry->priv_data; |
| |
| if (__test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags)) |
| usb_submit_urb(entry_priv->urb, GFP_ATOMIC); |
| } |
| |
| void rt2x00usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, |
| const enum data_queue_qid qid) |
| { |
| struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, qid); |
| unsigned long irqflags; |
| unsigned int index; |
| unsigned int index_done; |
| unsigned int i; |
| |
| /* |
| * Only protect the range we are going to loop over, |
| * if during our loop a extra entry is set to pending |
| * it should not be kicked during this run, since it |
| * is part of another TX operation. |
| */ |
| spin_lock_irqsave(&queue->lock, irqflags); |
| index = queue->index[Q_INDEX]; |
| index_done = queue->index[Q_INDEX_DONE]; |
| spin_unlock_irqrestore(&queue->lock, irqflags); |
| |
| /* |
| * Start from the TX done pointer, this guarentees that we will |
| * send out all frames in the correct order. |
| */ |
| if (index_done < index) { |
| for (i = index_done; i < index; i++) |
| rt2x00usb_kick_tx_entry(&queue->entries[i]); |
| } else { |
| for (i = index_done; i < queue->limit; i++) |
| rt2x00usb_kick_tx_entry(&queue->entries[i]); |
| |
| for (i = 0; i < index; i++) |
| rt2x00usb_kick_tx_entry(&queue->entries[i]); |
| } |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_kick_tx_queue); |
| |
| /* |
| * RX data handlers. |
| */ |
| static void rt2x00usb_interrupt_rxdone(struct urb *urb) |
| { |
| struct queue_entry *entry = (struct queue_entry *)urb->context; |
| struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; |
| struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); |
| u8 rxd[32]; |
| |
| if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || |
| !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) |
| return; |
| |
| /* |
| * Check if the received data is simply too small |
| * to be actually valid, or if the urb is signaling |
| * a problem. |
| */ |
| if (urb->actual_length < entry->queue->desc_size || urb->status) { |
| __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); |
| usb_submit_urb(urb, GFP_ATOMIC); |
| return; |
| } |
| |
| /* |
| * Fill in desc fields of the skb descriptor |
| */ |
| skbdesc->desc = rxd; |
| skbdesc->desc_len = entry->queue->desc_size; |
| |
| /* |
| * Send the frame to rt2x00lib for further processing. |
| */ |
| rt2x00lib_rxdone(rt2x00dev, entry); |
| } |
| |
| /* |
| * Radio handlers |
| */ |
| void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) |
| { |
| struct queue_entry_priv_usb *entry_priv; |
| struct queue_entry_priv_usb_bcn *bcn_priv; |
| struct data_queue *queue; |
| unsigned int i; |
| |
| rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0, 0, |
| REGISTER_TIMEOUT); |
| |
| /* |
| * Cancel all queues. |
| */ |
| queue_for_each(rt2x00dev, queue) { |
| for (i = 0; i < queue->limit; i++) { |
| entry_priv = queue->entries[i].priv_data; |
| usb_kill_urb(entry_priv->urb); |
| } |
| } |
| |
| /* |
| * Kill guardian urb (if required by driver). |
| */ |
| if (!test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)) |
| return; |
| |
| for (i = 0; i < rt2x00dev->bcn->limit; i++) { |
| bcn_priv = rt2x00dev->bcn->entries[i].priv_data; |
| if (bcn_priv->guardian_urb) |
| usb_kill_urb(bcn_priv->guardian_urb); |
| } |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio); |
| |
| /* |
| * Device initialization handlers. |
| */ |
| void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev, |
| struct queue_entry *entry) |
| { |
| struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); |
| struct queue_entry_priv_usb *entry_priv = entry->priv_data; |
| |
| usb_fill_bulk_urb(entry_priv->urb, usb_dev, |
| usb_rcvbulkpipe(usb_dev, 1), |
| entry->skb->data, entry->skb->len, |
| rt2x00usb_interrupt_rxdone, entry); |
| |
| __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); |
| usb_submit_urb(entry_priv->urb, GFP_ATOMIC); |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_init_rxentry); |
| |
| void rt2x00usb_init_txentry(struct rt2x00_dev *rt2x00dev, |
| struct queue_entry *entry) |
| { |
| entry->flags = 0; |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_init_txentry); |
| |
| static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev, |
| struct data_queue *queue) |
| { |
| struct queue_entry_priv_usb *entry_priv; |
| struct queue_entry_priv_usb_bcn *bcn_priv; |
| unsigned int i; |
| |
| for (i = 0; i < queue->limit; i++) { |
| entry_priv = queue->entries[i].priv_data; |
| entry_priv->urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!entry_priv->urb) |
| return -ENOMEM; |
| } |
| |
| /* |
| * If this is not the beacon queue or |
| * no guardian byte was required for the beacon, |
| * then we are done. |
| */ |
| if (rt2x00dev->bcn != queue || |
| !test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)) |
| return 0; |
| |
| for (i = 0; i < queue->limit; i++) { |
| bcn_priv = queue->entries[i].priv_data; |
| bcn_priv->guardian_urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!bcn_priv->guardian_urb) |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev, |
| struct data_queue *queue) |
| { |
| struct queue_entry_priv_usb *entry_priv; |
| struct queue_entry_priv_usb_bcn *bcn_priv; |
| unsigned int i; |
| |
| if (!queue->entries) |
| return; |
| |
| for (i = 0; i < queue->limit; i++) { |
| entry_priv = queue->entries[i].priv_data; |
| usb_kill_urb(entry_priv->urb); |
| usb_free_urb(entry_priv->urb); |
| } |
| |
| /* |
| * If this is not the beacon queue or |
| * no guardian byte was required for the beacon, |
| * then we are done. |
| */ |
| if (rt2x00dev->bcn != queue || |
| !test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)) |
| return; |
| |
| for (i = 0; i < queue->limit; i++) { |
| bcn_priv = queue->entries[i].priv_data; |
| usb_kill_urb(bcn_priv->guardian_urb); |
| usb_free_urb(bcn_priv->guardian_urb); |
| } |
| } |
| |
| int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) |
| { |
| struct data_queue *queue; |
| int status; |
| |
| /* |
| * Allocate DMA |
| */ |
| queue_for_each(rt2x00dev, queue) { |
| status = rt2x00usb_alloc_urb(rt2x00dev, queue); |
| if (status) |
| goto exit; |
| } |
| |
| return 0; |
| |
| exit: |
| rt2x00usb_uninitialize(rt2x00dev); |
| |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_initialize); |
| |
| void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev) |
| { |
| struct data_queue *queue; |
| |
| queue_for_each(rt2x00dev, queue) |
| rt2x00usb_free_urb(rt2x00dev, queue); |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_uninitialize); |
| |
| /* |
| * USB driver handlers. |
| */ |
| static void rt2x00usb_free_reg(struct rt2x00_dev *rt2x00dev) |
| { |
| kfree(rt2x00dev->rf); |
| rt2x00dev->rf = NULL; |
| |
| kfree(rt2x00dev->eeprom); |
| rt2x00dev->eeprom = NULL; |
| |
| kfree(rt2x00dev->csr.cache); |
| rt2x00dev->csr.cache = NULL; |
| } |
| |
| static int rt2x00usb_alloc_reg(struct rt2x00_dev *rt2x00dev) |
| { |
| rt2x00dev->csr.cache = kzalloc(CSR_CACHE_SIZE, GFP_KERNEL); |
| if (!rt2x00dev->csr.cache) |
| goto exit; |
| |
| rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL); |
| if (!rt2x00dev->eeprom) |
| goto exit; |
| |
| rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL); |
| if (!rt2x00dev->rf) |
| goto exit; |
| |
| return 0; |
| |
| exit: |
| ERROR_PROBE("Failed to allocate registers.\n"); |
| |
| rt2x00usb_free_reg(rt2x00dev); |
| |
| return -ENOMEM; |
| } |
| |
| int rt2x00usb_probe(struct usb_interface *usb_intf, |
| const struct usb_device_id *id) |
| { |
| struct usb_device *usb_dev = interface_to_usbdev(usb_intf); |
| struct rt2x00_ops *ops = (struct rt2x00_ops *)id->driver_info; |
| struct ieee80211_hw *hw; |
| struct rt2x00_dev *rt2x00dev; |
| int retval; |
| |
| usb_dev = usb_get_dev(usb_dev); |
| |
| hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw); |
| if (!hw) { |
| ERROR_PROBE("Failed to allocate hardware.\n"); |
| retval = -ENOMEM; |
| goto exit_put_device; |
| } |
| |
| usb_set_intfdata(usb_intf, hw); |
| |
| rt2x00dev = hw->priv; |
| rt2x00dev->dev = &usb_intf->dev; |
| rt2x00dev->ops = ops; |
| rt2x00dev->hw = hw; |
| mutex_init(&rt2x00dev->usb_cache_mutex); |
| |
| rt2x00dev->usb_maxpacket = |
| usb_maxpacket(usb_dev, usb_sndbulkpipe(usb_dev, 1), 1); |
| if (!rt2x00dev->usb_maxpacket) |
| rt2x00dev->usb_maxpacket = 1; |
| |
| retval = rt2x00usb_alloc_reg(rt2x00dev); |
| if (retval) |
| goto exit_free_device; |
| |
| retval = rt2x00lib_probe_dev(rt2x00dev); |
| if (retval) |
| goto exit_free_reg; |
| |
| return 0; |
| |
| exit_free_reg: |
| rt2x00usb_free_reg(rt2x00dev); |
| |
| exit_free_device: |
| ieee80211_free_hw(hw); |
| |
| exit_put_device: |
| usb_put_dev(usb_dev); |
| |
| usb_set_intfdata(usb_intf, NULL); |
| |
| return retval; |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_probe); |
| |
| void rt2x00usb_disconnect(struct usb_interface *usb_intf) |
| { |
| struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); |
| struct rt2x00_dev *rt2x00dev = hw->priv; |
| |
| /* |
| * Free all allocated data. |
| */ |
| rt2x00lib_remove_dev(rt2x00dev); |
| rt2x00usb_free_reg(rt2x00dev); |
| ieee80211_free_hw(hw); |
| |
| /* |
| * Free the USB device data. |
| */ |
| usb_set_intfdata(usb_intf, NULL); |
| usb_put_dev(interface_to_usbdev(usb_intf)); |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_disconnect); |
| |
| #ifdef CONFIG_PM |
| int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state) |
| { |
| struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); |
| struct rt2x00_dev *rt2x00dev = hw->priv; |
| int retval; |
| |
| retval = rt2x00lib_suspend(rt2x00dev, state); |
| if (retval) |
| return retval; |
| |
| rt2x00usb_free_reg(rt2x00dev); |
| |
| /* |
| * Decrease usbdev refcount. |
| */ |
| usb_put_dev(interface_to_usbdev(usb_intf)); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_suspend); |
| |
| int rt2x00usb_resume(struct usb_interface *usb_intf) |
| { |
| struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); |
| struct rt2x00_dev *rt2x00dev = hw->priv; |
| int retval; |
| |
| usb_get_dev(interface_to_usbdev(usb_intf)); |
| |
| retval = rt2x00usb_alloc_reg(rt2x00dev); |
| if (retval) |
| return retval; |
| |
| retval = rt2x00lib_resume(rt2x00dev); |
| if (retval) |
| goto exit_free_reg; |
| |
| return 0; |
| |
| exit_free_reg: |
| rt2x00usb_free_reg(rt2x00dev); |
| |
| return retval; |
| } |
| EXPORT_SYMBOL_GPL(rt2x00usb_resume); |
| #endif /* CONFIG_PM */ |
| |
| /* |
| * rt2x00usb module information. |
| */ |
| MODULE_AUTHOR(DRV_PROJECT); |
| MODULE_VERSION(DRV_VERSION); |
| MODULE_DESCRIPTION("rt2x00 usb library"); |
| MODULE_LICENSE("GPL"); |