| // SPDX-License-Identifier: BSD-3-Clause-Clear |
| /* |
| * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. |
| * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved. |
| */ |
| #include <linux/rtnetlink.h> |
| |
| #include "core.h" |
| #include "debug.h" |
| |
| /* World regdom to be used in case default regd from fw is unavailable */ |
| #define ATH11K_2GHZ_CH01_11 REG_RULE(2412 - 10, 2462 + 10, 40, 0, 20, 0) |
| #define ATH11K_5GHZ_5150_5350 REG_RULE(5150 - 10, 5350 + 10, 80, 0, 30,\ |
| NL80211_RRF_NO_IR) |
| #define ATH11K_5GHZ_5725_5850 REG_RULE(5725 - 10, 5850 + 10, 80, 0, 30,\ |
| NL80211_RRF_NO_IR) |
| |
| #define ETSI_WEATHER_RADAR_BAND_LOW 5590 |
| #define ETSI_WEATHER_RADAR_BAND_HIGH 5650 |
| #define ETSI_WEATHER_RADAR_BAND_CAC_TIMEOUT 600000 |
| |
| static const struct ieee80211_regdomain ath11k_world_regd = { |
| .n_reg_rules = 3, |
| .alpha2 = "00", |
| .reg_rules = { |
| ATH11K_2GHZ_CH01_11, |
| ATH11K_5GHZ_5150_5350, |
| ATH11K_5GHZ_5725_5850, |
| } |
| }; |
| |
| static bool ath11k_regdom_changes(struct ath11k *ar, char *alpha2) |
| { |
| const struct ieee80211_regdomain *regd; |
| |
| regd = rcu_dereference_rtnl(ar->hw->wiphy->regd); |
| /* This can happen during wiphy registration where the previous |
| * user request is received before we update the regd received |
| * from firmware. |
| */ |
| if (!regd) |
| return true; |
| |
| return memcmp(regd->alpha2, alpha2, 2) != 0; |
| } |
| |
| static void |
| ath11k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request) |
| { |
| struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); |
| struct wmi_init_country_params init_country_param; |
| struct wmi_set_current_country_params set_current_param = {}; |
| struct ath11k *ar = hw->priv; |
| int ret; |
| |
| ath11k_dbg(ar->ab, ATH11K_DBG_REG, |
| "Regulatory Notification received for %s\n", wiphy_name(wiphy)); |
| |
| /* Currently supporting only General User Hints. Cell base user |
| * hints to be handled later. |
| * Hints from other sources like Core, Beacons are not expected for |
| * self managed wiphy's |
| */ |
| if (!(request->initiator == NL80211_REGDOM_SET_BY_USER && |
| request->user_reg_hint_type == NL80211_USER_REG_HINT_USER)) { |
| ath11k_warn(ar->ab, "Unexpected Regulatory event for this wiphy\n"); |
| return; |
| } |
| |
| if (!IS_ENABLED(CONFIG_ATH_REG_DYNAMIC_USER_REG_HINTS)) { |
| ath11k_dbg(ar->ab, ATH11K_DBG_REG, |
| "Country Setting is not allowed\n"); |
| return; |
| } |
| |
| if (!ath11k_regdom_changes(ar, request->alpha2)) { |
| ath11k_dbg(ar->ab, ATH11K_DBG_REG, "Country is already set\n"); |
| return; |
| } |
| |
| /* Set the country code to the firmware and will receive |
| * the WMI_REG_CHAN_LIST_CC EVENT for updating the |
| * reg info |
| */ |
| if (ar->ab->hw_params.current_cc_support) { |
| memcpy(&set_current_param.alpha2, request->alpha2, 2); |
| memcpy(&ar->alpha2, &set_current_param.alpha2, 2); |
| ret = ath11k_wmi_send_set_current_country_cmd(ar, &set_current_param); |
| if (ret) |
| ath11k_warn(ar->ab, |
| "failed set current country code: %d\n", ret); |
| } else { |
| init_country_param.flags = ALPHA_IS_SET; |
| memcpy(&init_country_param.cc_info.alpha2, request->alpha2, 2); |
| init_country_param.cc_info.alpha2[2] = 0; |
| |
| ret = ath11k_wmi_send_init_country_cmd(ar, init_country_param); |
| if (ret) |
| ath11k_warn(ar->ab, |
| "INIT Country code set to fw failed : %d\n", ret); |
| } |
| |
| ath11k_mac_11d_scan_stop(ar); |
| ar->regdom_set_by_user = true; |
| } |
| |
| int ath11k_reg_update_chan_list(struct ath11k *ar, bool wait) |
| { |
| struct ieee80211_supported_band **bands; |
| struct scan_chan_list_params *params; |
| struct ieee80211_channel *channel; |
| struct ieee80211_hw *hw = ar->hw; |
| struct channel_param *ch; |
| enum nl80211_band band; |
| int num_channels = 0; |
| int i, ret, left; |
| |
| if (wait && ar->state_11d != ATH11K_11D_IDLE) { |
| left = wait_for_completion_timeout(&ar->completed_11d_scan, |
| ATH11K_SCAN_TIMEOUT_HZ); |
| if (!left) { |
| ath11k_dbg(ar->ab, ATH11K_DBG_REG, |
| "failed to receive 11d scan complete: timed out\n"); |
| ar->state_11d = ATH11K_11D_IDLE; |
| } |
| ath11k_dbg(ar->ab, ATH11K_DBG_REG, |
| "11d scan wait left time %d\n", left); |
| } |
| |
| if (wait && |
| (ar->scan.state == ATH11K_SCAN_STARTING || |
| ar->scan.state == ATH11K_SCAN_RUNNING)) { |
| left = wait_for_completion_timeout(&ar->scan.completed, |
| ATH11K_SCAN_TIMEOUT_HZ); |
| if (!left) |
| ath11k_dbg(ar->ab, ATH11K_DBG_REG, |
| "failed to receive hw scan complete: timed out\n"); |
| |
| ath11k_dbg(ar->ab, ATH11K_DBG_REG, |
| "hw scan wait left time %d\n", left); |
| } |
| |
| if (ar->state == ATH11K_STATE_RESTARTING) |
| return 0; |
| |
| bands = hw->wiphy->bands; |
| for (band = 0; band < NUM_NL80211_BANDS; band++) { |
| if (!bands[band]) |
| continue; |
| |
| for (i = 0; i < bands[band]->n_channels; i++) { |
| if (bands[band]->channels[i].flags & |
| IEEE80211_CHAN_DISABLED) |
| continue; |
| |
| num_channels++; |
| } |
| } |
| |
| if (WARN_ON(!num_channels)) |
| return -EINVAL; |
| |
| params = kzalloc(struct_size(params, ch_param, num_channels), |
| GFP_KERNEL); |
| if (!params) |
| return -ENOMEM; |
| |
| params->pdev_id = ar->pdev->pdev_id; |
| params->nallchans = num_channels; |
| |
| ch = params->ch_param; |
| |
| for (band = 0; band < NUM_NL80211_BANDS; band++) { |
| if (!bands[band]) |
| continue; |
| |
| for (i = 0; i < bands[band]->n_channels; i++) { |
| channel = &bands[band]->channels[i]; |
| |
| if (channel->flags & IEEE80211_CHAN_DISABLED) |
| continue; |
| |
| /* TODO: Set to true/false based on some condition? */ |
| ch->allow_ht = true; |
| ch->allow_vht = true; |
| ch->allow_he = true; |
| |
| ch->dfs_set = |
| !!(channel->flags & IEEE80211_CHAN_RADAR); |
| ch->is_chan_passive = !!(channel->flags & |
| IEEE80211_CHAN_NO_IR); |
| ch->is_chan_passive |= ch->dfs_set; |
| ch->mhz = channel->center_freq; |
| ch->cfreq1 = channel->center_freq; |
| ch->minpower = 0; |
| ch->maxpower = channel->max_power * 2; |
| ch->maxregpower = channel->max_reg_power * 2; |
| ch->antennamax = channel->max_antenna_gain * 2; |
| |
| /* TODO: Use appropriate phymodes */ |
| if (channel->band == NL80211_BAND_2GHZ) |
| ch->phy_mode = MODE_11G; |
| else |
| ch->phy_mode = MODE_11A; |
| |
| if (channel->band == NL80211_BAND_6GHZ && |
| cfg80211_channel_is_psc(channel)) |
| ch->psc_channel = true; |
| |
| ath11k_dbg(ar->ab, ATH11K_DBG_WMI, |
| "mac channel [%d/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n", |
| i, params->nallchans, |
| ch->mhz, ch->maxpower, ch->maxregpower, |
| ch->antennamax, ch->phy_mode); |
| |
| ch++; |
| /* TODO: use quarrter/half rate, cfreq12, dfs_cfreq2 |
| * set_agile, reg_class_idx |
| */ |
| } |
| } |
| |
| ret = ath11k_wmi_send_scan_chan_list_cmd(ar, params); |
| kfree(params); |
| |
| return ret; |
| } |
| |
| static void ath11k_copy_regd(struct ieee80211_regdomain *regd_orig, |
| struct ieee80211_regdomain *regd_copy) |
| { |
| u8 i; |
| |
| /* The caller should have checked error conditions */ |
| memcpy(regd_copy, regd_orig, sizeof(*regd_orig)); |
| |
| for (i = 0; i < regd_orig->n_reg_rules; i++) |
| memcpy(®d_copy->reg_rules[i], ®d_orig->reg_rules[i], |
| sizeof(struct ieee80211_reg_rule)); |
| } |
| |
| int ath11k_regd_update(struct ath11k *ar) |
| { |
| struct ieee80211_regdomain *regd, *regd_copy = NULL; |
| int ret, regd_len, pdev_id; |
| struct ath11k_base *ab; |
| |
| ab = ar->ab; |
| pdev_id = ar->pdev_idx; |
| |
| spin_lock_bh(&ab->base_lock); |
| |
| /* Prefer the latest regd update over default if it's available */ |
| if (ab->new_regd[pdev_id]) { |
| regd = ab->new_regd[pdev_id]; |
| } else { |
| /* Apply the regd received during init through |
| * WMI_REG_CHAN_LIST_CC event. In case of failure to |
| * receive the regd, initialize with a default world |
| * regulatory. |
| */ |
| if (ab->default_regd[pdev_id]) { |
| regd = ab->default_regd[pdev_id]; |
| } else { |
| ath11k_warn(ab, |
| "failed to receive default regd during init\n"); |
| regd = (struct ieee80211_regdomain *)&ath11k_world_regd; |
| } |
| } |
| |
| if (!regd) { |
| ret = -EINVAL; |
| spin_unlock_bh(&ab->base_lock); |
| goto err; |
| } |
| |
| regd_len = sizeof(*regd) + (regd->n_reg_rules * |
| sizeof(struct ieee80211_reg_rule)); |
| |
| regd_copy = kzalloc(regd_len, GFP_ATOMIC); |
| if (regd_copy) |
| ath11k_copy_regd(regd, regd_copy); |
| |
| spin_unlock_bh(&ab->base_lock); |
| |
| if (!regd_copy) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| ret = regulatory_set_wiphy_regd(ar->hw->wiphy, regd_copy); |
| |
| kfree(regd_copy); |
| |
| if (ret) |
| goto err; |
| |
| if (ar->state == ATH11K_STATE_ON) { |
| ret = ath11k_reg_update_chan_list(ar, true); |
| if (ret) |
| goto err; |
| } |
| |
| return 0; |
| err: |
| ath11k_warn(ab, "failed to perform regd update : %d\n", ret); |
| return ret; |
| } |
| |
| static enum nl80211_dfs_regions |
| ath11k_map_fw_dfs_region(enum ath11k_dfs_region dfs_region) |
| { |
| switch (dfs_region) { |
| case ATH11K_DFS_REG_FCC: |
| case ATH11K_DFS_REG_CN: |
| return NL80211_DFS_FCC; |
| case ATH11K_DFS_REG_ETSI: |
| case ATH11K_DFS_REG_KR: |
| return NL80211_DFS_ETSI; |
| case ATH11K_DFS_REG_MKK: |
| case ATH11K_DFS_REG_MKK_N: |
| return NL80211_DFS_JP; |
| default: |
| return NL80211_DFS_UNSET; |
| } |
| } |
| |
| static u32 ath11k_map_fw_reg_flags(u16 reg_flags) |
| { |
| u32 flags = 0; |
| |
| if (reg_flags & REGULATORY_CHAN_NO_IR) |
| flags = NL80211_RRF_NO_IR; |
| |
| if (reg_flags & REGULATORY_CHAN_RADAR) |
| flags |= NL80211_RRF_DFS; |
| |
| if (reg_flags & REGULATORY_CHAN_NO_OFDM) |
| flags |= NL80211_RRF_NO_OFDM; |
| |
| if (reg_flags & REGULATORY_CHAN_INDOOR_ONLY) |
| flags |= NL80211_RRF_NO_OUTDOOR; |
| |
| if (reg_flags & REGULATORY_CHAN_NO_HT40) |
| flags |= NL80211_RRF_NO_HT40; |
| |
| if (reg_flags & REGULATORY_CHAN_NO_80MHZ) |
| flags |= NL80211_RRF_NO_80MHZ; |
| |
| if (reg_flags & REGULATORY_CHAN_NO_160MHZ) |
| flags |= NL80211_RRF_NO_160MHZ; |
| |
| return flags; |
| } |
| |
| static u32 ath11k_map_fw_phy_flags(u32 phy_flags) |
| { |
| u32 flags = 0; |
| |
| if (phy_flags & ATH11K_REG_PHY_BITMAP_NO11AX) |
| flags |= NL80211_RRF_NO_HE; |
| |
| return flags; |
| } |
| |
| static bool |
| ath11k_reg_can_intersect(struct ieee80211_reg_rule *rule1, |
| struct ieee80211_reg_rule *rule2) |
| { |
| u32 start_freq1, end_freq1; |
| u32 start_freq2, end_freq2; |
| |
| start_freq1 = rule1->freq_range.start_freq_khz; |
| start_freq2 = rule2->freq_range.start_freq_khz; |
| |
| end_freq1 = rule1->freq_range.end_freq_khz; |
| end_freq2 = rule2->freq_range.end_freq_khz; |
| |
| if ((start_freq1 >= start_freq2 && |
| start_freq1 < end_freq2) || |
| (start_freq2 > start_freq1 && |
| start_freq2 < end_freq1)) |
| return true; |
| |
| /* TODO: Should we restrict intersection feasibility |
| * based on min bandwidth of the intersected region also, |
| * say the intersected rule should have a min bandwidth |
| * of 20MHz? |
| */ |
| |
| return false; |
| } |
| |
| static void ath11k_reg_intersect_rules(struct ieee80211_reg_rule *rule1, |
| struct ieee80211_reg_rule *rule2, |
| struct ieee80211_reg_rule *new_rule) |
| { |
| u32 start_freq1, end_freq1; |
| u32 start_freq2, end_freq2; |
| u32 freq_diff, max_bw; |
| |
| start_freq1 = rule1->freq_range.start_freq_khz; |
| start_freq2 = rule2->freq_range.start_freq_khz; |
| |
| end_freq1 = rule1->freq_range.end_freq_khz; |
| end_freq2 = rule2->freq_range.end_freq_khz; |
| |
| new_rule->freq_range.start_freq_khz = max_t(u32, start_freq1, |
| start_freq2); |
| new_rule->freq_range.end_freq_khz = min_t(u32, end_freq1, end_freq2); |
| |
| freq_diff = new_rule->freq_range.end_freq_khz - |
| new_rule->freq_range.start_freq_khz; |
| max_bw = min_t(u32, rule1->freq_range.max_bandwidth_khz, |
| rule2->freq_range.max_bandwidth_khz); |
| new_rule->freq_range.max_bandwidth_khz = min_t(u32, max_bw, freq_diff); |
| |
| new_rule->power_rule.max_antenna_gain = |
| min_t(u32, rule1->power_rule.max_antenna_gain, |
| rule2->power_rule.max_antenna_gain); |
| |
| new_rule->power_rule.max_eirp = min_t(u32, rule1->power_rule.max_eirp, |
| rule2->power_rule.max_eirp); |
| |
| /* Use the flags of both the rules */ |
| new_rule->flags = rule1->flags | rule2->flags; |
| |
| /* To be safe, lts use the max cac timeout of both rules */ |
| new_rule->dfs_cac_ms = max_t(u32, rule1->dfs_cac_ms, |
| rule2->dfs_cac_ms); |
| } |
| |
| static struct ieee80211_regdomain * |
| ath11k_regd_intersect(struct ieee80211_regdomain *default_regd, |
| struct ieee80211_regdomain *curr_regd) |
| { |
| u8 num_old_regd_rules, num_curr_regd_rules, num_new_regd_rules; |
| struct ieee80211_reg_rule *old_rule, *curr_rule, *new_rule; |
| struct ieee80211_regdomain *new_regd = NULL; |
| u8 i, j, k; |
| |
| num_old_regd_rules = default_regd->n_reg_rules; |
| num_curr_regd_rules = curr_regd->n_reg_rules; |
| num_new_regd_rules = 0; |
| |
| /* Find the number of intersecting rules to allocate new regd memory */ |
| for (i = 0; i < num_old_regd_rules; i++) { |
| old_rule = default_regd->reg_rules + i; |
| for (j = 0; j < num_curr_regd_rules; j++) { |
| curr_rule = curr_regd->reg_rules + j; |
| |
| if (ath11k_reg_can_intersect(old_rule, curr_rule)) |
| num_new_regd_rules++; |
| } |
| } |
| |
| if (!num_new_regd_rules) |
| return NULL; |
| |
| new_regd = kzalloc(sizeof(*new_regd) + (num_new_regd_rules * |
| sizeof(struct ieee80211_reg_rule)), |
| GFP_ATOMIC); |
| |
| if (!new_regd) |
| return NULL; |
| |
| /* We set the new country and dfs region directly and only trim |
| * the freq, power, antenna gain by intersecting with the |
| * default regdomain. Also MAX of the dfs cac timeout is selected. |
| */ |
| new_regd->n_reg_rules = num_new_regd_rules; |
| memcpy(new_regd->alpha2, curr_regd->alpha2, sizeof(new_regd->alpha2)); |
| new_regd->dfs_region = curr_regd->dfs_region; |
| new_rule = new_regd->reg_rules; |
| |
| for (i = 0, k = 0; i < num_old_regd_rules; i++) { |
| old_rule = default_regd->reg_rules + i; |
| for (j = 0; j < num_curr_regd_rules; j++) { |
| curr_rule = curr_regd->reg_rules + j; |
| |
| if (ath11k_reg_can_intersect(old_rule, curr_rule)) |
| ath11k_reg_intersect_rules(old_rule, curr_rule, |
| (new_rule + k++)); |
| } |
| } |
| return new_regd; |
| } |
| |
| static const char * |
| ath11k_reg_get_regdom_str(enum nl80211_dfs_regions dfs_region) |
| { |
| switch (dfs_region) { |
| case NL80211_DFS_FCC: |
| return "FCC"; |
| case NL80211_DFS_ETSI: |
| return "ETSI"; |
| case NL80211_DFS_JP: |
| return "JP"; |
| default: |
| return "UNSET"; |
| } |
| } |
| |
| static u16 |
| ath11k_reg_adjust_bw(u16 start_freq, u16 end_freq, u16 max_bw) |
| { |
| u16 bw; |
| |
| if (end_freq <= start_freq) |
| return 0; |
| |
| bw = end_freq - start_freq; |
| bw = min_t(u16, bw, max_bw); |
| |
| if (bw >= 80 && bw < 160) |
| bw = 80; |
| else if (bw >= 40 && bw < 80) |
| bw = 40; |
| else if (bw >= 20 && bw < 40) |
| bw = 20; |
| else |
| bw = 0; |
| |
| return bw; |
| } |
| |
| static void |
| ath11k_reg_update_rule(struct ieee80211_reg_rule *reg_rule, u32 start_freq, |
| u32 end_freq, u32 bw, u32 ant_gain, u32 reg_pwr, |
| u32 reg_flags) |
| { |
| reg_rule->freq_range.start_freq_khz = MHZ_TO_KHZ(start_freq); |
| reg_rule->freq_range.end_freq_khz = MHZ_TO_KHZ(end_freq); |
| reg_rule->freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw); |
| reg_rule->power_rule.max_antenna_gain = DBI_TO_MBI(ant_gain); |
| reg_rule->power_rule.max_eirp = DBM_TO_MBM(reg_pwr); |
| reg_rule->flags = reg_flags; |
| } |
| |
| static void |
| ath11k_reg_update_weather_radar_band(struct ath11k_base *ab, |
| struct ieee80211_regdomain *regd, |
| struct cur_reg_rule *reg_rule, |
| u8 *rule_idx, u32 flags, u16 max_bw) |
| { |
| u32 start_freq; |
| u32 end_freq; |
| u16 bw; |
| u8 i; |
| |
| i = *rule_idx; |
| |
| /* there might be situations when even the input rule must be dropped */ |
| i--; |
| |
| /* frequencies below weather radar */ |
| bw = ath11k_reg_adjust_bw(reg_rule->start_freq, |
| ETSI_WEATHER_RADAR_BAND_LOW, max_bw); |
| if (bw > 0) { |
| i++; |
| |
| ath11k_reg_update_rule(regd->reg_rules + i, |
| reg_rule->start_freq, |
| ETSI_WEATHER_RADAR_BAND_LOW, bw, |
| reg_rule->ant_gain, reg_rule->reg_power, |
| flags); |
| |
| ath11k_dbg(ab, ATH11K_DBG_REG, |
| "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n", |
| i + 1, reg_rule->start_freq, |
| ETSI_WEATHER_RADAR_BAND_LOW, bw, reg_rule->ant_gain, |
| reg_rule->reg_power, regd->reg_rules[i].dfs_cac_ms, |
| flags); |
| } |
| |
| /* weather radar frequencies */ |
| start_freq = max_t(u32, reg_rule->start_freq, |
| ETSI_WEATHER_RADAR_BAND_LOW); |
| end_freq = min_t(u32, reg_rule->end_freq, ETSI_WEATHER_RADAR_BAND_HIGH); |
| |
| bw = ath11k_reg_adjust_bw(start_freq, end_freq, max_bw); |
| if (bw > 0) { |
| i++; |
| |
| ath11k_reg_update_rule(regd->reg_rules + i, start_freq, |
| end_freq, bw, reg_rule->ant_gain, |
| reg_rule->reg_power, flags); |
| |
| regd->reg_rules[i].dfs_cac_ms = ETSI_WEATHER_RADAR_BAND_CAC_TIMEOUT; |
| |
| ath11k_dbg(ab, ATH11K_DBG_REG, |
| "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n", |
| i + 1, start_freq, end_freq, bw, |
| reg_rule->ant_gain, reg_rule->reg_power, |
| regd->reg_rules[i].dfs_cac_ms, flags); |
| } |
| |
| /* frequencies above weather radar */ |
| bw = ath11k_reg_adjust_bw(ETSI_WEATHER_RADAR_BAND_HIGH, |
| reg_rule->end_freq, max_bw); |
| if (bw > 0) { |
| i++; |
| |
| ath11k_reg_update_rule(regd->reg_rules + i, |
| ETSI_WEATHER_RADAR_BAND_HIGH, |
| reg_rule->end_freq, bw, |
| reg_rule->ant_gain, reg_rule->reg_power, |
| flags); |
| |
| ath11k_dbg(ab, ATH11K_DBG_REG, |
| "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n", |
| i + 1, ETSI_WEATHER_RADAR_BAND_HIGH, |
| reg_rule->end_freq, bw, reg_rule->ant_gain, |
| reg_rule->reg_power, regd->reg_rules[i].dfs_cac_ms, |
| flags); |
| } |
| |
| *rule_idx = i; |
| } |
| |
| struct ieee80211_regdomain * |
| ath11k_reg_build_regd(struct ath11k_base *ab, |
| struct cur_regulatory_info *reg_info, bool intersect) |
| { |
| struct ieee80211_regdomain *tmp_regd, *default_regd, *new_regd = NULL; |
| struct cur_reg_rule *reg_rule; |
| u8 i = 0, j = 0, k = 0; |
| u8 num_rules; |
| u16 max_bw; |
| u32 flags; |
| char alpha2[3]; |
| |
| num_rules = reg_info->num_5ghz_reg_rules + reg_info->num_2ghz_reg_rules; |
| |
| /* FIXME: Currently taking reg rules for 6 GHz only from Indoor AP mode list. |
| * This can be updated after complete 6 GHz regulatory support is added. |
| */ |
| if (reg_info->is_ext_reg_event) |
| num_rules += reg_info->num_6ghz_rules_ap[WMI_REG_INDOOR_AP]; |
| |
| if (!num_rules) |
| goto ret; |
| |
| /* Add max additional rules to accommodate weather radar band */ |
| if (reg_info->dfs_region == ATH11K_DFS_REG_ETSI) |
| num_rules += 2; |
| |
| tmp_regd = kzalloc(sizeof(*tmp_regd) + |
| (num_rules * sizeof(struct ieee80211_reg_rule)), |
| GFP_ATOMIC); |
| if (!tmp_regd) |
| goto ret; |
| |
| memcpy(tmp_regd->alpha2, reg_info->alpha2, REG_ALPHA2_LEN + 1); |
| memcpy(alpha2, reg_info->alpha2, REG_ALPHA2_LEN + 1); |
| alpha2[2] = '\0'; |
| tmp_regd->dfs_region = ath11k_map_fw_dfs_region(reg_info->dfs_region); |
| |
| ath11k_dbg(ab, ATH11K_DBG_REG, |
| "Country %s, CFG Regdomain %s FW Regdomain %d, num_reg_rules %d\n", |
| alpha2, ath11k_reg_get_regdom_str(tmp_regd->dfs_region), |
| reg_info->dfs_region, num_rules); |
| /* Update reg_rules[] below. Firmware is expected to |
| * send these rules in order(2 GHz rules first and then 5 GHz) |
| */ |
| for (; i < num_rules; i++) { |
| if (reg_info->num_2ghz_reg_rules && |
| (i < reg_info->num_2ghz_reg_rules)) { |
| reg_rule = reg_info->reg_rules_2ghz_ptr + i; |
| max_bw = min_t(u16, reg_rule->max_bw, |
| reg_info->max_bw_2ghz); |
| flags = 0; |
| } else if (reg_info->num_5ghz_reg_rules && |
| (j < reg_info->num_5ghz_reg_rules)) { |
| reg_rule = reg_info->reg_rules_5ghz_ptr + j++; |
| max_bw = min_t(u16, reg_rule->max_bw, |
| reg_info->max_bw_5ghz); |
| |
| /* FW doesn't pass NL80211_RRF_AUTO_BW flag for |
| * BW Auto correction, we can enable this by default |
| * for all 5G rules here. The regulatory core performs |
| * BW correction if required and applies flags as |
| * per other BW rule flags we pass from here |
| */ |
| flags = NL80211_RRF_AUTO_BW; |
| } else if (reg_info->is_ext_reg_event && |
| reg_info->num_6ghz_rules_ap[WMI_REG_INDOOR_AP] && |
| (k < reg_info->num_6ghz_rules_ap[WMI_REG_INDOOR_AP])) { |
| reg_rule = reg_info->reg_rules_6ghz_ap_ptr[WMI_REG_INDOOR_AP] + |
| k++; |
| max_bw = min_t(u16, reg_rule->max_bw, |
| reg_info->max_bw_6ghz_ap[WMI_REG_INDOOR_AP]); |
| flags = NL80211_RRF_AUTO_BW; |
| } else { |
| break; |
| } |
| |
| flags |= ath11k_map_fw_reg_flags(reg_rule->flags); |
| flags |= ath11k_map_fw_phy_flags(reg_info->phybitmap); |
| |
| ath11k_reg_update_rule(tmp_regd->reg_rules + i, |
| reg_rule->start_freq, |
| reg_rule->end_freq, max_bw, |
| reg_rule->ant_gain, reg_rule->reg_power, |
| flags); |
| |
| /* Update dfs cac timeout if the dfs domain is ETSI and the |
| * new rule covers weather radar band. |
| * Default value of '0' corresponds to 60s timeout, so no |
| * need to update that for other rules. |
| */ |
| if (flags & NL80211_RRF_DFS && |
| reg_info->dfs_region == ATH11K_DFS_REG_ETSI && |
| (reg_rule->end_freq > ETSI_WEATHER_RADAR_BAND_LOW && |
| reg_rule->start_freq < ETSI_WEATHER_RADAR_BAND_HIGH)){ |
| ath11k_reg_update_weather_radar_band(ab, tmp_regd, |
| reg_rule, &i, |
| flags, max_bw); |
| continue; |
| } |
| |
| if (reg_info->is_ext_reg_event) { |
| ath11k_dbg(ab, ATH11K_DBG_REG, |
| "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d) (%d, %d)\n", |
| i + 1, reg_rule->start_freq, reg_rule->end_freq, |
| max_bw, reg_rule->ant_gain, reg_rule->reg_power, |
| tmp_regd->reg_rules[i].dfs_cac_ms, flags, |
| reg_rule->psd_flag, reg_rule->psd_eirp); |
| } else { |
| ath11k_dbg(ab, ATH11K_DBG_REG, |
| "\t%d. (%d - %d @ %d) (%d, %d) (%d ms) (FLAGS %d)\n", |
| i + 1, reg_rule->start_freq, reg_rule->end_freq, |
| max_bw, reg_rule->ant_gain, reg_rule->reg_power, |
| tmp_regd->reg_rules[i].dfs_cac_ms, |
| flags); |
| } |
| } |
| |
| tmp_regd->n_reg_rules = i; |
| |
| if (intersect) { |
| default_regd = ab->default_regd[reg_info->phy_id]; |
| |
| /* Get a new regd by intersecting the received regd with |
| * our default regd. |
| */ |
| new_regd = ath11k_regd_intersect(default_regd, tmp_regd); |
| kfree(tmp_regd); |
| if (!new_regd) { |
| ath11k_warn(ab, "Unable to create intersected regdomain\n"); |
| goto ret; |
| } |
| } else { |
| new_regd = tmp_regd; |
| } |
| |
| ret: |
| return new_regd; |
| } |
| |
| void ath11k_regd_update_work(struct work_struct *work) |
| { |
| struct ath11k *ar = container_of(work, struct ath11k, |
| regd_update_work); |
| int ret; |
| |
| ret = ath11k_regd_update(ar); |
| if (ret) { |
| /* Firmware has already moved to the new regd. We need |
| * to maintain channel consistency across FW, Host driver |
| * and userspace. Hence as a fallback mechanism we can set |
| * the prev or default country code to the firmware. |
| */ |
| /* TODO: Implement Fallback Mechanism */ |
| } |
| } |
| |
| void ath11k_reg_init(struct ath11k *ar) |
| { |
| ar->hw->wiphy->regulatory_flags = REGULATORY_WIPHY_SELF_MANAGED; |
| ar->hw->wiphy->reg_notifier = ath11k_reg_notifier; |
| } |
| |
| void ath11k_reg_free(struct ath11k_base *ab) |
| { |
| int i; |
| |
| for (i = 0; i < ab->hw_params.max_radios; i++) { |
| kfree(ab->default_regd[i]); |
| kfree(ab->new_regd[i]); |
| } |
| } |