| // SPDX-License-Identifier: BSD-3-Clause-Clear |
| /* |
| * Copyright (c) 2020 The Linux Foundation. All rights reserved. |
| * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/sysfs.h> |
| #include <linux/thermal.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include "core.h" |
| #include "debug.h" |
| |
| static int |
| ath11k_thermal_get_max_throttle_state(struct thermal_cooling_device *cdev, |
| unsigned long *state) |
| { |
| *state = ATH11K_THERMAL_THROTTLE_MAX; |
| |
| return 0; |
| } |
| |
| static int |
| ath11k_thermal_get_cur_throttle_state(struct thermal_cooling_device *cdev, |
| unsigned long *state) |
| { |
| struct ath11k *ar = cdev->devdata; |
| |
| mutex_lock(&ar->conf_mutex); |
| *state = ar->thermal.throttle_state; |
| mutex_unlock(&ar->conf_mutex); |
| |
| return 0; |
| } |
| |
| static int |
| ath11k_thermal_set_cur_throttle_state(struct thermal_cooling_device *cdev, |
| unsigned long throttle_state) |
| { |
| struct ath11k *ar = cdev->devdata; |
| int ret; |
| |
| if (throttle_state > ATH11K_THERMAL_THROTTLE_MAX) { |
| ath11k_warn(ar->ab, "throttle state %ld is exceeding the limit %d\n", |
| throttle_state, ATH11K_THERMAL_THROTTLE_MAX); |
| return -EINVAL; |
| } |
| mutex_lock(&ar->conf_mutex); |
| ret = ath11k_thermal_set_throttling(ar, throttle_state); |
| if (ret == 0) |
| ar->thermal.throttle_state = throttle_state; |
| mutex_unlock(&ar->conf_mutex); |
| return ret; |
| } |
| |
| static const struct thermal_cooling_device_ops ath11k_thermal_ops = { |
| .get_max_state = ath11k_thermal_get_max_throttle_state, |
| .get_cur_state = ath11k_thermal_get_cur_throttle_state, |
| .set_cur_state = ath11k_thermal_set_cur_throttle_state, |
| }; |
| |
| static ssize_t ath11k_thermal_show_temp(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct ath11k *ar = dev_get_drvdata(dev); |
| int ret, temperature; |
| unsigned long time_left; |
| |
| mutex_lock(&ar->conf_mutex); |
| |
| /* Can't get temperature when the card is off */ |
| if (ar->state != ATH11K_STATE_ON) { |
| ret = -ENETDOWN; |
| goto out; |
| } |
| |
| reinit_completion(&ar->thermal.wmi_sync); |
| ret = ath11k_wmi_send_pdev_temperature_cmd(ar); |
| if (ret) { |
| ath11k_warn(ar->ab, "failed to read temperature %d\n", ret); |
| goto out; |
| } |
| |
| if (test_bit(ATH11K_FLAG_CRASH_FLUSH, &ar->ab->dev_flags)) { |
| ret = -ESHUTDOWN; |
| goto out; |
| } |
| |
| time_left = wait_for_completion_timeout(&ar->thermal.wmi_sync, |
| ATH11K_THERMAL_SYNC_TIMEOUT_HZ); |
| if (!time_left) { |
| ath11k_warn(ar->ab, "failed to synchronize thermal read\n"); |
| ret = -ETIMEDOUT; |
| goto out; |
| } |
| |
| spin_lock_bh(&ar->data_lock); |
| temperature = ar->thermal.temperature; |
| spin_unlock_bh(&ar->data_lock); |
| |
| /* display in millidegree Celsius */ |
| ret = snprintf(buf, PAGE_SIZE, "%d\n", temperature * 1000); |
| out: |
| mutex_unlock(&ar->conf_mutex); |
| return ret; |
| } |
| |
| void ath11k_thermal_event_temperature(struct ath11k *ar, int temperature) |
| { |
| spin_lock_bh(&ar->data_lock); |
| ar->thermal.temperature = temperature; |
| spin_unlock_bh(&ar->data_lock); |
| complete(&ar->thermal.wmi_sync); |
| } |
| |
| static SENSOR_DEVICE_ATTR(temp1_input, 0444, ath11k_thermal_show_temp, |
| NULL, 0); |
| |
| static struct attribute *ath11k_hwmon_attrs[] = { |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(ath11k_hwmon); |
| |
| int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_state) |
| { |
| struct ath11k_base *ab = ar->ab; |
| struct thermal_mitigation_params param; |
| int ret = 0; |
| |
| lockdep_assert_held(&ar->conf_mutex); |
| |
| if (ar->state != ATH11K_STATE_ON) |
| return 0; |
| |
| memset(¶m, 0, sizeof(param)); |
| param.pdev_id = ar->pdev->pdev_id; |
| param.enable = throttle_state ? 1 : 0; |
| param.dc = ATH11K_THERMAL_DEFAULT_DUTY_CYCLE; |
| param.dc_per_event = 0xFFFFFFFF; |
| |
| param.levelconf[0].tmplwm = ATH11K_THERMAL_TEMP_LOW_MARK; |
| param.levelconf[0].tmphwm = ATH11K_THERMAL_TEMP_HIGH_MARK; |
| param.levelconf[0].dcoffpercent = throttle_state; |
| param.levelconf[0].priority = 0; /* disable all data tx queues */ |
| |
| ret = ath11k_wmi_send_thermal_mitigation_param_cmd(ar, ¶m); |
| if (ret) { |
| ath11k_warn(ab, "failed to send thermal mitigation duty cycle %u ret %d\n", |
| throttle_state, ret); |
| } |
| |
| return ret; |
| } |
| |
| int ath11k_thermal_register(struct ath11k_base *ab) |
| { |
| struct thermal_cooling_device *cdev; |
| struct device *hwmon_dev; |
| struct ath11k *ar; |
| struct ath11k_pdev *pdev; |
| int i, ret; |
| |
| for (i = 0; i < ab->num_radios; i++) { |
| pdev = &ab->pdevs[i]; |
| ar = pdev->ar; |
| if (!ar) |
| continue; |
| |
| cdev = thermal_cooling_device_register("ath11k_thermal", ar, |
| &ath11k_thermal_ops); |
| |
| if (IS_ERR(cdev)) { |
| ath11k_err(ab, "failed to setup thermal device result: %ld\n", |
| PTR_ERR(cdev)); |
| ret = -EINVAL; |
| goto err_thermal_destroy; |
| } |
| |
| ar->thermal.cdev = cdev; |
| |
| ret = sysfs_create_link(&ar->hw->wiphy->dev.kobj, &cdev->device.kobj, |
| "cooling_device"); |
| if (ret) { |
| ath11k_err(ab, "failed to create cooling device symlink\n"); |
| goto err_thermal_destroy; |
| } |
| |
| if (!IS_REACHABLE(CONFIG_HWMON)) |
| return 0; |
| |
| hwmon_dev = devm_hwmon_device_register_with_groups(&ar->hw->wiphy->dev, |
| "ath11k_hwmon", ar, |
| ath11k_hwmon_groups); |
| if (IS_ERR(hwmon_dev)) { |
| ath11k_err(ar->ab, "failed to register hwmon device: %ld\n", |
| PTR_ERR(hwmon_dev)); |
| ret = -EINVAL; |
| goto err_thermal_destroy; |
| } |
| } |
| |
| return 0; |
| |
| err_thermal_destroy: |
| ath11k_thermal_unregister(ab); |
| return ret; |
| } |
| |
| void ath11k_thermal_unregister(struct ath11k_base *ab) |
| { |
| struct ath11k *ar; |
| struct ath11k_pdev *pdev; |
| int i; |
| |
| for (i = 0; i < ab->num_radios; i++) { |
| pdev = &ab->pdevs[i]; |
| ar = pdev->ar; |
| if (!ar) |
| continue; |
| |
| sysfs_remove_link(&ar->hw->wiphy->dev.kobj, "cooling_device"); |
| thermal_cooling_device_unregister(ar->thermal.cdev); |
| } |
| } |