| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * Copyright (C) 2010 John Crispin <john@phrozen.org> |
| * Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de> |
| * Based on EP93xx wdt driver |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/bitops.h> |
| #include <linux/watchdog.h> |
| #include <linux/of_platform.h> |
| #include <linux/uaccess.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/regmap.h> |
| #include <linux/mfd/syscon.h> |
| |
| #include <lantiq_soc.h> |
| |
| #define LTQ_XRX_RCU_RST_STAT 0x0014 |
| #define LTQ_XRX_RCU_RST_STAT_WDT BIT(31) |
| |
| /* CPU0 Reset Source Register */ |
| #define LTQ_FALCON_SYS1_CPU0RS 0x0060 |
| /* reset cause mask */ |
| #define LTQ_FALCON_SYS1_CPU0RS_MASK 0x0007 |
| #define LTQ_FALCON_SYS1_CPU0RS_WDT 0x02 |
| |
| /* |
| * Section 3.4 of the datasheet |
| * The password sequence protects the WDT control register from unintended |
| * write actions, which might cause malfunction of the WDT. |
| * |
| * essentially the following two magic passwords need to be written to allow |
| * IO access to the WDT core |
| */ |
| #define LTQ_WDT_CR_PW1 0x00BE0000 |
| #define LTQ_WDT_CR_PW2 0x00DC0000 |
| |
| #define LTQ_WDT_CR 0x0 /* watchdog control register */ |
| #define LTQ_WDT_CR_GEN BIT(31) /* enable bit */ |
| /* Pre-warning limit set to 1/16 of max WDT period */ |
| #define LTQ_WDT_CR_PWL (0x3 << 26) |
| /* set clock divider to 0x40000 */ |
| #define LTQ_WDT_CR_CLKDIV (0x3 << 24) |
| #define LTQ_WDT_CR_PW_MASK GENMASK(23, 16) /* Password field */ |
| #define LTQ_WDT_CR_MAX_TIMEOUT ((1 << 16) - 1) /* The reload field is 16 bit */ |
| #define LTQ_WDT_SR 0x8 /* watchdog status register */ |
| #define LTQ_WDT_SR_EN BIT(31) /* Enable */ |
| #define LTQ_WDT_SR_VALUE_MASK GENMASK(15, 0) /* Timer value */ |
| |
| #define LTQ_WDT_DIVIDER 0x40000 |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| |
| struct ltq_wdt_hw { |
| int (*bootstatus_get)(struct device *dev); |
| }; |
| |
| struct ltq_wdt_priv { |
| struct watchdog_device wdt; |
| void __iomem *membase; |
| unsigned long clk_rate; |
| }; |
| |
| static u32 ltq_wdt_r32(struct ltq_wdt_priv *priv, u32 offset) |
| { |
| return __raw_readl(priv->membase + offset); |
| } |
| |
| static void ltq_wdt_w32(struct ltq_wdt_priv *priv, u32 val, u32 offset) |
| { |
| __raw_writel(val, priv->membase + offset); |
| } |
| |
| static void ltq_wdt_mask(struct ltq_wdt_priv *priv, u32 clear, u32 set, |
| u32 offset) |
| { |
| u32 val = ltq_wdt_r32(priv, offset); |
| |
| val &= ~(clear); |
| val |= set; |
| ltq_wdt_w32(priv, val, offset); |
| } |
| |
| static struct ltq_wdt_priv *ltq_wdt_get_priv(struct watchdog_device *wdt) |
| { |
| return container_of(wdt, struct ltq_wdt_priv, wdt); |
| } |
| |
| static struct watchdog_info ltq_wdt_info = { |
| .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | |
| WDIOF_CARDRESET, |
| .identity = "ltq_wdt", |
| }; |
| |
| static int ltq_wdt_start(struct watchdog_device *wdt) |
| { |
| struct ltq_wdt_priv *priv = ltq_wdt_get_priv(wdt); |
| u32 timeout; |
| |
| timeout = wdt->timeout * priv->clk_rate; |
| |
| ltq_wdt_mask(priv, LTQ_WDT_CR_PW_MASK, LTQ_WDT_CR_PW1, LTQ_WDT_CR); |
| /* write the second magic plus the configuration and new timeout */ |
| ltq_wdt_mask(priv, LTQ_WDT_CR_PW_MASK | LTQ_WDT_CR_MAX_TIMEOUT, |
| LTQ_WDT_CR_GEN | LTQ_WDT_CR_PWL | LTQ_WDT_CR_CLKDIV | |
| LTQ_WDT_CR_PW2 | timeout, |
| LTQ_WDT_CR); |
| |
| return 0; |
| } |
| |
| static int ltq_wdt_stop(struct watchdog_device *wdt) |
| { |
| struct ltq_wdt_priv *priv = ltq_wdt_get_priv(wdt); |
| |
| ltq_wdt_mask(priv, LTQ_WDT_CR_PW_MASK, LTQ_WDT_CR_PW1, LTQ_WDT_CR); |
| ltq_wdt_mask(priv, LTQ_WDT_CR_GEN | LTQ_WDT_CR_PW_MASK, |
| LTQ_WDT_CR_PW2, LTQ_WDT_CR); |
| |
| return 0; |
| } |
| |
| static int ltq_wdt_ping(struct watchdog_device *wdt) |
| { |
| struct ltq_wdt_priv *priv = ltq_wdt_get_priv(wdt); |
| u32 timeout; |
| |
| timeout = wdt->timeout * priv->clk_rate; |
| |
| ltq_wdt_mask(priv, LTQ_WDT_CR_PW_MASK, LTQ_WDT_CR_PW1, LTQ_WDT_CR); |
| /* write the second magic plus the configuration and new timeout */ |
| ltq_wdt_mask(priv, LTQ_WDT_CR_PW_MASK | LTQ_WDT_CR_MAX_TIMEOUT, |
| LTQ_WDT_CR_PW2 | timeout, LTQ_WDT_CR); |
| |
| return 0; |
| } |
| |
| static unsigned int ltq_wdt_get_timeleft(struct watchdog_device *wdt) |
| { |
| struct ltq_wdt_priv *priv = ltq_wdt_get_priv(wdt); |
| u64 timeout; |
| |
| timeout = ltq_wdt_r32(priv, LTQ_WDT_SR) & LTQ_WDT_SR_VALUE_MASK; |
| return do_div(timeout, priv->clk_rate); |
| } |
| |
| static const struct watchdog_ops ltq_wdt_ops = { |
| .owner = THIS_MODULE, |
| .start = ltq_wdt_start, |
| .stop = ltq_wdt_stop, |
| .ping = ltq_wdt_ping, |
| .get_timeleft = ltq_wdt_get_timeleft, |
| }; |
| |
| static int ltq_wdt_xrx_bootstatus_get(struct device *dev) |
| { |
| struct regmap *rcu_regmap; |
| u32 val; |
| int err; |
| |
| rcu_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "regmap"); |
| if (IS_ERR(rcu_regmap)) |
| return PTR_ERR(rcu_regmap); |
| |
| err = regmap_read(rcu_regmap, LTQ_XRX_RCU_RST_STAT, &val); |
| if (err) |
| return err; |
| |
| if (val & LTQ_XRX_RCU_RST_STAT_WDT) |
| return WDIOF_CARDRESET; |
| |
| return 0; |
| } |
| |
| static int ltq_wdt_falcon_bootstatus_get(struct device *dev) |
| { |
| struct regmap *rcu_regmap; |
| u32 val; |
| int err; |
| |
| rcu_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, |
| "lantiq,rcu"); |
| if (IS_ERR(rcu_regmap)) |
| return PTR_ERR(rcu_regmap); |
| |
| err = regmap_read(rcu_regmap, LTQ_FALCON_SYS1_CPU0RS, &val); |
| if (err) |
| return err; |
| |
| if ((val & LTQ_FALCON_SYS1_CPU0RS_MASK) == LTQ_FALCON_SYS1_CPU0RS_WDT) |
| return WDIOF_CARDRESET; |
| |
| return 0; |
| } |
| |
| static int ltq_wdt_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct ltq_wdt_priv *priv; |
| struct watchdog_device *wdt; |
| struct resource *res; |
| struct clk *clk; |
| const struct ltq_wdt_hw *ltq_wdt_hw; |
| int ret; |
| u32 status; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| priv->membase = devm_ioremap_resource(dev, res); |
| if (IS_ERR(priv->membase)) |
| return PTR_ERR(priv->membase); |
| |
| /* we do not need to enable the clock as it is always running */ |
| clk = clk_get_io(); |
| priv->clk_rate = clk_get_rate(clk) / LTQ_WDT_DIVIDER; |
| if (!priv->clk_rate) { |
| dev_err(dev, "clock rate less than divider %i\n", |
| LTQ_WDT_DIVIDER); |
| return -EINVAL; |
| } |
| |
| wdt = &priv->wdt; |
| wdt->info = <q_wdt_info; |
| wdt->ops = <q_wdt_ops; |
| wdt->min_timeout = 1; |
| wdt->max_timeout = LTQ_WDT_CR_MAX_TIMEOUT / priv->clk_rate; |
| wdt->timeout = wdt->max_timeout; |
| wdt->parent = dev; |
| |
| ltq_wdt_hw = of_device_get_match_data(dev); |
| if (ltq_wdt_hw && ltq_wdt_hw->bootstatus_get) { |
| ret = ltq_wdt_hw->bootstatus_get(dev); |
| if (ret >= 0) |
| wdt->bootstatus = ret; |
| } |
| |
| watchdog_set_nowayout(wdt, nowayout); |
| watchdog_init_timeout(wdt, 0, dev); |
| |
| status = ltq_wdt_r32(priv, LTQ_WDT_SR); |
| if (status & LTQ_WDT_SR_EN) { |
| /* |
| * If the watchdog is already running overwrite it with our |
| * new settings. Stop is not needed as the start call will |
| * replace all settings anyway. |
| */ |
| ltq_wdt_start(wdt); |
| set_bit(WDOG_HW_RUNNING, &wdt->status); |
| } |
| |
| return devm_watchdog_register_device(dev, wdt); |
| } |
| |
| static const struct ltq_wdt_hw ltq_wdt_xrx100 = { |
| .bootstatus_get = ltq_wdt_xrx_bootstatus_get, |
| }; |
| |
| static const struct ltq_wdt_hw ltq_wdt_falcon = { |
| .bootstatus_get = ltq_wdt_falcon_bootstatus_get, |
| }; |
| |
| static const struct of_device_id ltq_wdt_match[] = { |
| { .compatible = "lantiq,wdt", .data = NULL }, |
| { .compatible = "lantiq,xrx100-wdt", .data = <q_wdt_xrx100 }, |
| { .compatible = "lantiq,falcon-wdt", .data = <q_wdt_falcon }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, ltq_wdt_match); |
| |
| static struct platform_driver ltq_wdt_driver = { |
| .probe = ltq_wdt_probe, |
| .driver = { |
| .name = "wdt", |
| .of_match_table = ltq_wdt_match, |
| }, |
| }; |
| |
| module_platform_driver(ltq_wdt_driver); |
| |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); |
| MODULE_AUTHOR("John Crispin <john@phrozen.org>"); |
| MODULE_DESCRIPTION("Lantiq SoC Watchdog"); |
| MODULE_LICENSE("GPL"); |