| /* |
| * turbostat -- show CPU frequency and C-state residency |
| * on modern Intel and AMD processors. |
| * |
| * Copyright (c) 2013 Intel Corporation. |
| * Len Brown <len.brown@intel.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| |
| #define _GNU_SOURCE |
| #include MSRHEADER |
| #include INTEL_FAMILY_HEADER |
| #include <stdarg.h> |
| #include <stdio.h> |
| #include <err.h> |
| #include <unistd.h> |
| #include <sys/types.h> |
| #include <sys/wait.h> |
| #include <sys/stat.h> |
| #include <sys/select.h> |
| #include <sys/resource.h> |
| #include <fcntl.h> |
| #include <signal.h> |
| #include <sys/time.h> |
| #include <stdlib.h> |
| #include <getopt.h> |
| #include <dirent.h> |
| #include <string.h> |
| #include <ctype.h> |
| #include <sched.h> |
| #include <time.h> |
| #include <cpuid.h> |
| #include <linux/capability.h> |
| #include <errno.h> |
| |
| char *proc_stat = "/proc/stat"; |
| FILE *outf; |
| int *fd_percpu; |
| struct timeval interval_tv = {5, 0}; |
| struct timespec interval_ts = {5, 0}; |
| struct timespec one_msec = {0, 1000000}; |
| unsigned int num_iterations; |
| unsigned int debug; |
| unsigned int quiet; |
| unsigned int shown; |
| unsigned int sums_need_wide_columns; |
| unsigned int rapl_joules; |
| unsigned int summary_only; |
| unsigned int list_header_only; |
| unsigned int dump_only; |
| unsigned int do_snb_cstates; |
| unsigned int do_knl_cstates; |
| unsigned int do_slm_cstates; |
| unsigned int do_cnl_cstates; |
| unsigned int use_c1_residency_msr; |
| unsigned int has_aperf; |
| unsigned int has_epb; |
| unsigned int do_irtl_snb; |
| unsigned int do_irtl_hsw; |
| unsigned int units = 1000000; /* MHz etc */ |
| unsigned int genuine_intel; |
| unsigned int authentic_amd; |
| unsigned int max_level, max_extended_level; |
| unsigned int has_invariant_tsc; |
| unsigned int do_nhm_platform_info; |
| unsigned int no_MSR_MISC_PWR_MGMT; |
| unsigned int aperf_mperf_multiplier = 1; |
| double bclk; |
| double base_hz; |
| unsigned int has_base_hz; |
| double tsc_tweak = 1.0; |
| unsigned int show_pkg_only; |
| unsigned int show_core_only; |
| char *output_buffer, *outp; |
| unsigned int do_rapl; |
| unsigned int do_dts; |
| unsigned int do_ptm; |
| unsigned long long gfx_cur_rc6_ms; |
| unsigned long long cpuidle_cur_cpu_lpi_us; |
| unsigned long long cpuidle_cur_sys_lpi_us; |
| unsigned int gfx_cur_mhz; |
| unsigned int tcc_activation_temp; |
| unsigned int tcc_activation_temp_override; |
| double rapl_power_units, rapl_time_units; |
| double rapl_dram_energy_units, rapl_energy_units; |
| double rapl_joule_counter_range; |
| unsigned int do_core_perf_limit_reasons; |
| unsigned int has_automatic_cstate_conversion; |
| unsigned int do_gfx_perf_limit_reasons; |
| unsigned int do_ring_perf_limit_reasons; |
| unsigned int crystal_hz; |
| unsigned long long tsc_hz; |
| int base_cpu; |
| double discover_bclk(unsigned int family, unsigned int model); |
| unsigned int has_hwp; /* IA32_PM_ENABLE, IA32_HWP_CAPABILITIES */ |
| /* IA32_HWP_REQUEST, IA32_HWP_STATUS */ |
| unsigned int has_hwp_notify; /* IA32_HWP_INTERRUPT */ |
| unsigned int has_hwp_activity_window; /* IA32_HWP_REQUEST[bits 41:32] */ |
| unsigned int has_hwp_epp; /* IA32_HWP_REQUEST[bits 31:24] */ |
| unsigned int has_hwp_pkg; /* IA32_HWP_REQUEST_PKG */ |
| unsigned int has_misc_feature_control; |
| unsigned int first_counter_read = 1; |
| |
| #define RAPL_PKG (1 << 0) |
| /* 0x610 MSR_PKG_POWER_LIMIT */ |
| /* 0x611 MSR_PKG_ENERGY_STATUS */ |
| #define RAPL_PKG_PERF_STATUS (1 << 1) |
| /* 0x613 MSR_PKG_PERF_STATUS */ |
| #define RAPL_PKG_POWER_INFO (1 << 2) |
| /* 0x614 MSR_PKG_POWER_INFO */ |
| |
| #define RAPL_DRAM (1 << 3) |
| /* 0x618 MSR_DRAM_POWER_LIMIT */ |
| /* 0x619 MSR_DRAM_ENERGY_STATUS */ |
| #define RAPL_DRAM_PERF_STATUS (1 << 4) |
| /* 0x61b MSR_DRAM_PERF_STATUS */ |
| #define RAPL_DRAM_POWER_INFO (1 << 5) |
| /* 0x61c MSR_DRAM_POWER_INFO */ |
| |
| #define RAPL_CORES_POWER_LIMIT (1 << 6) |
| /* 0x638 MSR_PP0_POWER_LIMIT */ |
| #define RAPL_CORE_POLICY (1 << 7) |
| /* 0x63a MSR_PP0_POLICY */ |
| |
| #define RAPL_GFX (1 << 8) |
| /* 0x640 MSR_PP1_POWER_LIMIT */ |
| /* 0x641 MSR_PP1_ENERGY_STATUS */ |
| /* 0x642 MSR_PP1_POLICY */ |
| |
| #define RAPL_CORES_ENERGY_STATUS (1 << 9) |
| /* 0x639 MSR_PP0_ENERGY_STATUS */ |
| #define RAPL_CORES (RAPL_CORES_ENERGY_STATUS | RAPL_CORES_POWER_LIMIT) |
| #define TJMAX_DEFAULT 100 |
| |
| #define MAX(a, b) ((a) > (b) ? (a) : (b)) |
| |
| /* |
| * buffer size used by sscanf() for added column names |
| * Usually truncated to 7 characters, but also handles 18 columns for raw 64-bit counters |
| */ |
| #define NAME_BYTES 20 |
| #define PATH_BYTES 128 |
| |
| int backwards_count; |
| char *progname; |
| |
| #define CPU_SUBSET_MAXCPUS 1024 /* need to use before probe... */ |
| cpu_set_t *cpu_present_set, *cpu_affinity_set, *cpu_subset; |
| size_t cpu_present_setsize, cpu_affinity_setsize, cpu_subset_size; |
| #define MAX_ADDED_COUNTERS 8 |
| #define MAX_ADDED_THREAD_COUNTERS 24 |
| #define BITMASK_SIZE 32 |
| |
| struct thread_data { |
| struct timeval tv_begin; |
| struct timeval tv_end; |
| unsigned long long tsc; |
| unsigned long long aperf; |
| unsigned long long mperf; |
| unsigned long long c1; |
| unsigned long long irq_count; |
| unsigned int smi_count; |
| unsigned int cpu_id; |
| unsigned int apic_id; |
| unsigned int x2apic_id; |
| unsigned int flags; |
| #define CPU_IS_FIRST_THREAD_IN_CORE 0x2 |
| #define CPU_IS_FIRST_CORE_IN_PACKAGE 0x4 |
| unsigned long long counter[MAX_ADDED_THREAD_COUNTERS]; |
| } *thread_even, *thread_odd; |
| |
| struct core_data { |
| unsigned long long c3; |
| unsigned long long c6; |
| unsigned long long c7; |
| unsigned long long mc6_us; /* duplicate as per-core for now, even though per module */ |
| unsigned int core_temp_c; |
| unsigned int core_id; |
| unsigned long long counter[MAX_ADDED_COUNTERS]; |
| } *core_even, *core_odd; |
| |
| struct pkg_data { |
| unsigned long long pc2; |
| unsigned long long pc3; |
| unsigned long long pc6; |
| unsigned long long pc7; |
| unsigned long long pc8; |
| unsigned long long pc9; |
| unsigned long long pc10; |
| unsigned long long cpu_lpi; |
| unsigned long long sys_lpi; |
| unsigned long long pkg_wtd_core_c0; |
| unsigned long long pkg_any_core_c0; |
| unsigned long long pkg_any_gfxe_c0; |
| unsigned long long pkg_both_core_gfxe_c0; |
| long long gfx_rc6_ms; |
| unsigned int gfx_mhz; |
| unsigned int package_id; |
| unsigned int energy_pkg; /* MSR_PKG_ENERGY_STATUS */ |
| unsigned int energy_dram; /* MSR_DRAM_ENERGY_STATUS */ |
| unsigned int energy_cores; /* MSR_PP0_ENERGY_STATUS */ |
| unsigned int energy_gfx; /* MSR_PP1_ENERGY_STATUS */ |
| unsigned int rapl_pkg_perf_status; /* MSR_PKG_PERF_STATUS */ |
| unsigned int rapl_dram_perf_status; /* MSR_DRAM_PERF_STATUS */ |
| unsigned int pkg_temp_c; |
| unsigned long long counter[MAX_ADDED_COUNTERS]; |
| } *package_even, *package_odd; |
| |
| #define ODD_COUNTERS thread_odd, core_odd, package_odd |
| #define EVEN_COUNTERS thread_even, core_even, package_even |
| |
| #define GET_THREAD(thread_base, thread_no, core_no, node_no, pkg_no) \ |
| ((thread_base) + \ |
| ((pkg_no) * \ |
| topo.nodes_per_pkg * topo.cores_per_node * topo.threads_per_core) + \ |
| ((node_no) * topo.cores_per_node * topo.threads_per_core) + \ |
| ((core_no) * topo.threads_per_core) + \ |
| (thread_no)) |
| |
| #define GET_CORE(core_base, core_no, node_no, pkg_no) \ |
| ((core_base) + \ |
| ((pkg_no) * topo.nodes_per_pkg * topo.cores_per_node) + \ |
| ((node_no) * topo.cores_per_node) + \ |
| (core_no)) |
| |
| |
| #define GET_PKG(pkg_base, pkg_no) (pkg_base + pkg_no) |
| |
| enum counter_scope {SCOPE_CPU, SCOPE_CORE, SCOPE_PACKAGE}; |
| enum counter_type {COUNTER_ITEMS, COUNTER_CYCLES, COUNTER_SECONDS, COUNTER_USEC}; |
| enum counter_format {FORMAT_RAW, FORMAT_DELTA, FORMAT_PERCENT}; |
| |
| struct msr_counter { |
| unsigned int msr_num; |
| char name[NAME_BYTES]; |
| char path[PATH_BYTES]; |
| unsigned int width; |
| enum counter_type type; |
| enum counter_format format; |
| struct msr_counter *next; |
| unsigned int flags; |
| #define FLAGS_HIDE (1 << 0) |
| #define FLAGS_SHOW (1 << 1) |
| #define SYSFS_PERCPU (1 << 1) |
| }; |
| |
| struct sys_counters { |
| unsigned int added_thread_counters; |
| unsigned int added_core_counters; |
| unsigned int added_package_counters; |
| struct msr_counter *tp; |
| struct msr_counter *cp; |
| struct msr_counter *pp; |
| } sys; |
| |
| struct system_summary { |
| struct thread_data threads; |
| struct core_data cores; |
| struct pkg_data packages; |
| } average; |
| |
| struct cpu_topology { |
| int physical_package_id; |
| int logical_cpu_id; |
| int physical_node_id; |
| int logical_node_id; /* 0-based count within the package */ |
| int physical_core_id; |
| int thread_id; |
| cpu_set_t *put_ids; /* Processing Unit/Thread IDs */ |
| } *cpus; |
| |
| struct topo_params { |
| int num_packages; |
| int num_cpus; |
| int num_cores; |
| int max_cpu_num; |
| int max_node_num; |
| int nodes_per_pkg; |
| int cores_per_node; |
| int threads_per_core; |
| } topo; |
| |
| struct timeval tv_even, tv_odd, tv_delta; |
| |
| int *irq_column_2_cpu; /* /proc/interrupts column numbers */ |
| int *irqs_per_cpu; /* indexed by cpu_num */ |
| |
| void setup_all_buffers(void); |
| |
| int cpu_is_not_present(int cpu) |
| { |
| return !CPU_ISSET_S(cpu, cpu_present_setsize, cpu_present_set); |
| } |
| /* |
| * run func(thread, core, package) in topology order |
| * skip non-present cpus |
| */ |
| |
| int for_all_cpus(int (func)(struct thread_data *, struct core_data *, struct pkg_data *), |
| struct thread_data *thread_base, struct core_data *core_base, struct pkg_data *pkg_base) |
| { |
| int retval, pkg_no, core_no, thread_no, node_no; |
| |
| for (pkg_no = 0; pkg_no < topo.num_packages; ++pkg_no) { |
| for (core_no = 0; core_no < topo.cores_per_node; ++core_no) { |
| for (node_no = 0; node_no < topo.nodes_per_pkg; |
| node_no++) { |
| for (thread_no = 0; thread_no < |
| topo.threads_per_core; ++thread_no) { |
| struct thread_data *t; |
| struct core_data *c; |
| struct pkg_data *p; |
| |
| t = GET_THREAD(thread_base, thread_no, |
| core_no, node_no, |
| pkg_no); |
| |
| if (cpu_is_not_present(t->cpu_id)) |
| continue; |
| |
| c = GET_CORE(core_base, core_no, |
| node_no, pkg_no); |
| p = GET_PKG(pkg_base, pkg_no); |
| |
| retval = func(t, c, p); |
| if (retval) |
| return retval; |
| } |
| } |
| } |
| } |
| return 0; |
| } |
| |
| int cpu_migrate(int cpu) |
| { |
| CPU_ZERO_S(cpu_affinity_setsize, cpu_affinity_set); |
| CPU_SET_S(cpu, cpu_affinity_setsize, cpu_affinity_set); |
| if (sched_setaffinity(0, cpu_affinity_setsize, cpu_affinity_set) == -1) |
| return -1; |
| else |
| return 0; |
| } |
| int get_msr_fd(int cpu) |
| { |
| char pathname[32]; |
| int fd; |
| |
| fd = fd_percpu[cpu]; |
| |
| if (fd) |
| return fd; |
| |
| sprintf(pathname, "/dev/cpu/%d/msr", cpu); |
| fd = open(pathname, O_RDONLY); |
| if (fd < 0) |
| err(-1, "%s open failed, try chown or chmod +r /dev/cpu/*/msr, or run as root", pathname); |
| |
| fd_percpu[cpu] = fd; |
| |
| return fd; |
| } |
| |
| int get_msr(int cpu, off_t offset, unsigned long long *msr) |
| { |
| ssize_t retval; |
| |
| retval = pread(get_msr_fd(cpu), msr, sizeof(*msr), offset); |
| |
| if (retval != sizeof *msr) |
| err(-1, "cpu%d: msr offset 0x%llx read failed", cpu, (unsigned long long)offset); |
| |
| return 0; |
| } |
| |
| /* |
| * This list matches the column headers, except |
| * 1. built-in only, the sysfs counters are not here -- we learn of those at run-time |
| * 2. Core and CPU are moved to the end, we can't have strings that contain them |
| * matching on them for --show and --hide. |
| */ |
| struct msr_counter bic[] = { |
| { 0x0, "usec" }, |
| { 0x0, "Time_Of_Day_Seconds" }, |
| { 0x0, "Package" }, |
| { 0x0, "Node" }, |
| { 0x0, "Avg_MHz" }, |
| { 0x0, "Busy%" }, |
| { 0x0, "Bzy_MHz" }, |
| { 0x0, "TSC_MHz" }, |
| { 0x0, "IRQ" }, |
| { 0x0, "SMI", "", 32, 0, FORMAT_DELTA, NULL}, |
| { 0x0, "sysfs" }, |
| { 0x0, "CPU%c1" }, |
| { 0x0, "CPU%c3" }, |
| { 0x0, "CPU%c6" }, |
| { 0x0, "CPU%c7" }, |
| { 0x0, "ThreadC" }, |
| { 0x0, "CoreTmp" }, |
| { 0x0, "CoreCnt" }, |
| { 0x0, "PkgTmp" }, |
| { 0x0, "GFX%rc6" }, |
| { 0x0, "GFXMHz" }, |
| { 0x0, "Pkg%pc2" }, |
| { 0x0, "Pkg%pc3" }, |
| { 0x0, "Pkg%pc6" }, |
| { 0x0, "Pkg%pc7" }, |
| { 0x0, "Pkg%pc8" }, |
| { 0x0, "Pkg%pc9" }, |
| { 0x0, "Pk%pc10" }, |
| { 0x0, "CPU%LPI" }, |
| { 0x0, "SYS%LPI" }, |
| { 0x0, "PkgWatt" }, |
| { 0x0, "CorWatt" }, |
| { 0x0, "GFXWatt" }, |
| { 0x0, "PkgCnt" }, |
| { 0x0, "RAMWatt" }, |
| { 0x0, "PKG_%" }, |
| { 0x0, "RAM_%" }, |
| { 0x0, "Pkg_J" }, |
| { 0x0, "Cor_J" }, |
| { 0x0, "GFX_J" }, |
| { 0x0, "RAM_J" }, |
| { 0x0, "Mod%c6" }, |
| { 0x0, "Totl%C0" }, |
| { 0x0, "Any%C0" }, |
| { 0x0, "GFX%C0" }, |
| { 0x0, "CPUGFX%" }, |
| { 0x0, "Core" }, |
| { 0x0, "CPU" }, |
| { 0x0, "APIC" }, |
| { 0x0, "X2APIC" }, |
| }; |
| |
| #define MAX_BIC (sizeof(bic) / sizeof(struct msr_counter)) |
| #define BIC_USEC (1ULL << 0) |
| #define BIC_TOD (1ULL << 1) |
| #define BIC_Package (1ULL << 2) |
| #define BIC_Node (1ULL << 3) |
| #define BIC_Avg_MHz (1ULL << 4) |
| #define BIC_Busy (1ULL << 5) |
| #define BIC_Bzy_MHz (1ULL << 6) |
| #define BIC_TSC_MHz (1ULL << 7) |
| #define BIC_IRQ (1ULL << 8) |
| #define BIC_SMI (1ULL << 9) |
| #define BIC_sysfs (1ULL << 10) |
| #define BIC_CPU_c1 (1ULL << 11) |
| #define BIC_CPU_c3 (1ULL << 12) |
| #define BIC_CPU_c6 (1ULL << 13) |
| #define BIC_CPU_c7 (1ULL << 14) |
| #define BIC_ThreadC (1ULL << 15) |
| #define BIC_CoreTmp (1ULL << 16) |
| #define BIC_CoreCnt (1ULL << 17) |
| #define BIC_PkgTmp (1ULL << 18) |
| #define BIC_GFX_rc6 (1ULL << 19) |
| #define BIC_GFXMHz (1ULL << 20) |
| #define BIC_Pkgpc2 (1ULL << 21) |
| #define BIC_Pkgpc3 (1ULL << 22) |
| #define BIC_Pkgpc6 (1ULL << 23) |
| #define BIC_Pkgpc7 (1ULL << 24) |
| #define BIC_Pkgpc8 (1ULL << 25) |
| #define BIC_Pkgpc9 (1ULL << 26) |
| #define BIC_Pkgpc10 (1ULL << 27) |
| #define BIC_CPU_LPI (1ULL << 28) |
| #define BIC_SYS_LPI (1ULL << 29) |
| #define BIC_PkgWatt (1ULL << 30) |
| #define BIC_CorWatt (1ULL << 31) |
| #define BIC_GFXWatt (1ULL << 32) |
| #define BIC_PkgCnt (1ULL << 33) |
| #define BIC_RAMWatt (1ULL << 34) |
| #define BIC_PKG__ (1ULL << 35) |
| #define BIC_RAM__ (1ULL << 36) |
| #define BIC_Pkg_J (1ULL << 37) |
| #define BIC_Cor_J (1ULL << 38) |
| #define BIC_GFX_J (1ULL << 39) |
| #define BIC_RAM_J (1ULL << 40) |
| #define BIC_Mod_c6 (1ULL << 41) |
| #define BIC_Totl_c0 (1ULL << 42) |
| #define BIC_Any_c0 (1ULL << 43) |
| #define BIC_GFX_c0 (1ULL << 44) |
| #define BIC_CPUGFX (1ULL << 45) |
| #define BIC_Core (1ULL << 46) |
| #define BIC_CPU (1ULL << 47) |
| #define BIC_APIC (1ULL << 48) |
| #define BIC_X2APIC (1ULL << 49) |
| |
| #define BIC_DISABLED_BY_DEFAULT (BIC_USEC | BIC_TOD | BIC_APIC | BIC_X2APIC) |
| |
| unsigned long long bic_enabled = (0xFFFFFFFFFFFFFFFFULL & ~BIC_DISABLED_BY_DEFAULT); |
| unsigned long long bic_present = BIC_USEC | BIC_TOD | BIC_sysfs | BIC_APIC | BIC_X2APIC; |
| |
| #define DO_BIC(COUNTER_NAME) (bic_enabled & bic_present & COUNTER_NAME) |
| #define ENABLE_BIC(COUNTER_NAME) (bic_enabled |= COUNTER_NAME) |
| #define BIC_PRESENT(COUNTER_BIT) (bic_present |= COUNTER_BIT) |
| #define BIC_NOT_PRESENT(COUNTER_BIT) (bic_present &= ~COUNTER_BIT) |
| |
| |
| #define MAX_DEFERRED 16 |
| char *deferred_skip_names[MAX_DEFERRED]; |
| int deferred_skip_index; |
| |
| /* |
| * HIDE_LIST - hide this list of counters, show the rest [default] |
| * SHOW_LIST - show this list of counters, hide the rest |
| */ |
| enum show_hide_mode { SHOW_LIST, HIDE_LIST } global_show_hide_mode = HIDE_LIST; |
| |
| void help(void) |
| { |
| fprintf(outf, |
| "Usage: turbostat [OPTIONS][(--interval seconds) | COMMAND ...]\n" |
| "\n" |
| "Turbostat forks the specified COMMAND and prints statistics\n" |
| "when COMMAND completes.\n" |
| "If no COMMAND is specified, turbostat wakes every 5-seconds\n" |
| "to print statistics, until interrupted.\n" |
| " -a, --add add a counter\n" |
| " eg. --add msr0x10,u64,cpu,delta,MY_TSC\n" |
| " -c, --cpu cpu-set limit output to summary plus cpu-set:\n" |
| " {core | package | j,k,l..m,n-p }\n" |
| " -d, --debug displays usec, Time_Of_Day_Seconds and more debugging\n" |
| " -D, --Dump displays the raw counter values\n" |
| " -e, --enable [all | column]\n" |
| " shows all or the specified disabled column\n" |
| " -H, --hide [column|column,column,...]\n" |
| " hide the specified column(s)\n" |
| " -i, --interval sec.subsec\n" |
| " Override default 5-second measurement interval\n" |
| " -J, --Joules displays energy in Joules instead of Watts\n" |
| " -l, --list list column headers only\n" |
| " -n, --num_iterations num\n" |
| " number of the measurement iterations\n" |
| " -o, --out file\n" |
| " create or truncate \"file\" for all output\n" |
| " -q, --quiet skip decoding system configuration header\n" |
| " -s, --show [column|column,column,...]\n" |
| " show only the specified column(s)\n" |
| " -S, --Summary\n" |
| " limits output to 1-line system summary per interval\n" |
| " -T, --TCC temperature\n" |
| " sets the Thermal Control Circuit temperature in\n" |
| " degrees Celsius\n" |
| " -h, --help print this help message\n" |
| " -v, --version print version information\n" |
| "\n" |
| "For more help, run \"man turbostat\"\n"); |
| } |
| |
| /* |
| * bic_lookup |
| * for all the strings in comma separate name_list, |
| * set the approprate bit in return value. |
| */ |
| unsigned long long bic_lookup(char *name_list, enum show_hide_mode mode) |
| { |
| int i; |
| unsigned long long retval = 0; |
| |
| while (name_list) { |
| char *comma; |
| |
| comma = strchr(name_list, ','); |
| |
| if (comma) |
| *comma = '\0'; |
| |
| if (!strcmp(name_list, "all")) |
| return ~0; |
| |
| for (i = 0; i < MAX_BIC; ++i) { |
| if (!strcmp(name_list, bic[i].name)) { |
| retval |= (1ULL << i); |
| break; |
| } |
| } |
| if (i == MAX_BIC) { |
| if (mode == SHOW_LIST) { |
| fprintf(stderr, "Invalid counter name: %s\n", name_list); |
| exit(-1); |
| } |
| deferred_skip_names[deferred_skip_index++] = name_list; |
| if (debug) |
| fprintf(stderr, "deferred \"%s\"\n", name_list); |
| if (deferred_skip_index >= MAX_DEFERRED) { |
| fprintf(stderr, "More than max %d un-recognized --skip options '%s'\n", |
| MAX_DEFERRED, name_list); |
| help(); |
| exit(1); |
| } |
| } |
| |
| name_list = comma; |
| if (name_list) |
| name_list++; |
| |
| } |
| return retval; |
| } |
| |
| |
| void print_header(char *delim) |
| { |
| struct msr_counter *mp; |
| int printed = 0; |
| |
| if (DO_BIC(BIC_USEC)) |
| outp += sprintf(outp, "%susec", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_TOD)) |
| outp += sprintf(outp, "%sTime_Of_Day_Seconds", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_Package)) |
| outp += sprintf(outp, "%sPackage", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_Node)) |
| outp += sprintf(outp, "%sNode", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_Core)) |
| outp += sprintf(outp, "%sCore", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_CPU)) |
| outp += sprintf(outp, "%sCPU", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_APIC)) |
| outp += sprintf(outp, "%sAPIC", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_X2APIC)) |
| outp += sprintf(outp, "%sX2APIC", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_Avg_MHz)) |
| outp += sprintf(outp, "%sAvg_MHz", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_Busy)) |
| outp += sprintf(outp, "%sBusy%%", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_Bzy_MHz)) |
| outp += sprintf(outp, "%sBzy_MHz", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_TSC_MHz)) |
| outp += sprintf(outp, "%sTSC_MHz", (printed++ ? delim : "")); |
| |
| if (DO_BIC(BIC_IRQ)) { |
| if (sums_need_wide_columns) |
| outp += sprintf(outp, "%s IRQ", (printed++ ? delim : "")); |
| else |
| outp += sprintf(outp, "%sIRQ", (printed++ ? delim : "")); |
| } |
| |
| if (DO_BIC(BIC_SMI)) |
| outp += sprintf(outp, "%sSMI", (printed++ ? delim : "")); |
| |
| for (mp = sys.tp; mp; mp = mp->next) { |
| |
| if (mp->format == FORMAT_RAW) { |
| if (mp->width == 64) |
| outp += sprintf(outp, "%s%18.18s", (printed++ ? delim : ""), mp->name); |
| else |
| outp += sprintf(outp, "%s%10.10s", (printed++ ? delim : ""), mp->name); |
| } else { |
| if ((mp->type == COUNTER_ITEMS) && sums_need_wide_columns) |
| outp += sprintf(outp, "%s%8s", (printed++ ? delim : ""), mp->name); |
| else |
| outp += sprintf(outp, "%s%s", (printed++ ? delim : ""), mp->name); |
| } |
| } |
| |
| if (DO_BIC(BIC_CPU_c1)) |
| outp += sprintf(outp, "%sCPU%%c1", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_CPU_c3) && !do_slm_cstates && !do_knl_cstates && !do_cnl_cstates) |
| outp += sprintf(outp, "%sCPU%%c3", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_CPU_c6)) |
| outp += sprintf(outp, "%sCPU%%c6", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_CPU_c7)) |
| outp += sprintf(outp, "%sCPU%%c7", (printed++ ? delim : "")); |
| |
| if (DO_BIC(BIC_Mod_c6)) |
| outp += sprintf(outp, "%sMod%%c6", (printed++ ? delim : "")); |
| |
| if (DO_BIC(BIC_CoreTmp)) |
| outp += sprintf(outp, "%sCoreTmp", (printed++ ? delim : "")); |
| |
| for (mp = sys.cp; mp; mp = mp->next) { |
| if (mp->format == FORMAT_RAW) { |
| if (mp->width == 64) |
| outp += sprintf(outp, "%s%18.18s", delim, mp->name); |
| else |
| outp += sprintf(outp, "%s%10.10s", delim, mp->name); |
| } else { |
| if ((mp->type == COUNTER_ITEMS) && sums_need_wide_columns) |
| outp += sprintf(outp, "%s%8s", delim, mp->name); |
| else |
| outp += sprintf(outp, "%s%s", delim, mp->name); |
| } |
| } |
| |
| if (DO_BIC(BIC_PkgTmp)) |
| outp += sprintf(outp, "%sPkgTmp", (printed++ ? delim : "")); |
| |
| if (DO_BIC(BIC_GFX_rc6)) |
| outp += sprintf(outp, "%sGFX%%rc6", (printed++ ? delim : "")); |
| |
| if (DO_BIC(BIC_GFXMHz)) |
| outp += sprintf(outp, "%sGFXMHz", (printed++ ? delim : "")); |
| |
| if (DO_BIC(BIC_Totl_c0)) |
| outp += sprintf(outp, "%sTotl%%C0", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_Any_c0)) |
| outp += sprintf(outp, "%sAny%%C0", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_GFX_c0)) |
| outp += sprintf(outp, "%sGFX%%C0", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_CPUGFX)) |
| outp += sprintf(outp, "%sCPUGFX%%", (printed++ ? delim : "")); |
| |
| if (DO_BIC(BIC_Pkgpc2)) |
| outp += sprintf(outp, "%sPkg%%pc2", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_Pkgpc3)) |
| outp += sprintf(outp, "%sPkg%%pc3", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_Pkgpc6)) |
| outp += sprintf(outp, "%sPkg%%pc6", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_Pkgpc7)) |
| outp += sprintf(outp, "%sPkg%%pc7", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_Pkgpc8)) |
| outp += sprintf(outp, "%sPkg%%pc8", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_Pkgpc9)) |
| outp += sprintf(outp, "%sPkg%%pc9", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_Pkgpc10)) |
| outp += sprintf(outp, "%sPk%%pc10", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_CPU_LPI)) |
| outp += sprintf(outp, "%sCPU%%LPI", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_SYS_LPI)) |
| outp += sprintf(outp, "%sSYS%%LPI", (printed++ ? delim : "")); |
| |
| if (do_rapl && !rapl_joules) { |
| if (DO_BIC(BIC_PkgWatt)) |
| outp += sprintf(outp, "%sPkgWatt", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_CorWatt)) |
| outp += sprintf(outp, "%sCorWatt", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_GFXWatt)) |
| outp += sprintf(outp, "%sGFXWatt", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_RAMWatt)) |
| outp += sprintf(outp, "%sRAMWatt", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_PKG__)) |
| outp += sprintf(outp, "%sPKG_%%", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_RAM__)) |
| outp += sprintf(outp, "%sRAM_%%", (printed++ ? delim : "")); |
| } else if (do_rapl && rapl_joules) { |
| if (DO_BIC(BIC_Pkg_J)) |
| outp += sprintf(outp, "%sPkg_J", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_Cor_J)) |
| outp += sprintf(outp, "%sCor_J", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_GFX_J)) |
| outp += sprintf(outp, "%sGFX_J", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_RAM_J)) |
| outp += sprintf(outp, "%sRAM_J", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_PKG__)) |
| outp += sprintf(outp, "%sPKG_%%", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_RAM__)) |
| outp += sprintf(outp, "%sRAM_%%", (printed++ ? delim : "")); |
| } |
| for (mp = sys.pp; mp; mp = mp->next) { |
| if (mp->format == FORMAT_RAW) { |
| if (mp->width == 64) |
| outp += sprintf(outp, "%s%18.18s", delim, mp->name); |
| else |
| outp += sprintf(outp, "%s%10.10s", delim, mp->name); |
| } else { |
| if ((mp->type == COUNTER_ITEMS) && sums_need_wide_columns) |
| outp += sprintf(outp, "%s%8s", delim, mp->name); |
| else |
| outp += sprintf(outp, "%s%s", delim, mp->name); |
| } |
| } |
| |
| outp += sprintf(outp, "\n"); |
| } |
| |
| int dump_counters(struct thread_data *t, struct core_data *c, |
| struct pkg_data *p) |
| { |
| int i; |
| struct msr_counter *mp; |
| |
| outp += sprintf(outp, "t %p, c %p, p %p\n", t, c, p); |
| |
| if (t) { |
| outp += sprintf(outp, "CPU: %d flags 0x%x\n", |
| t->cpu_id, t->flags); |
| outp += sprintf(outp, "TSC: %016llX\n", t->tsc); |
| outp += sprintf(outp, "aperf: %016llX\n", t->aperf); |
| outp += sprintf(outp, "mperf: %016llX\n", t->mperf); |
| outp += sprintf(outp, "c1: %016llX\n", t->c1); |
| |
| if (DO_BIC(BIC_IRQ)) |
| outp += sprintf(outp, "IRQ: %lld\n", t->irq_count); |
| if (DO_BIC(BIC_SMI)) |
| outp += sprintf(outp, "SMI: %d\n", t->smi_count); |
| |
| for (i = 0, mp = sys.tp; mp; i++, mp = mp->next) { |
| outp += sprintf(outp, "tADDED [%d] msr0x%x: %08llX\n", |
| i, mp->msr_num, t->counter[i]); |
| } |
| } |
| |
| if (c) { |
| outp += sprintf(outp, "core: %d\n", c->core_id); |
| outp += sprintf(outp, "c3: %016llX\n", c->c3); |
| outp += sprintf(outp, "c6: %016llX\n", c->c6); |
| outp += sprintf(outp, "c7: %016llX\n", c->c7); |
| outp += sprintf(outp, "DTS: %dC\n", c->core_temp_c); |
| |
| for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) { |
| outp += sprintf(outp, "cADDED [%d] msr0x%x: %08llX\n", |
| i, mp->msr_num, c->counter[i]); |
| } |
| outp += sprintf(outp, "mc6_us: %016llX\n", c->mc6_us); |
| } |
| |
| if (p) { |
| outp += sprintf(outp, "package: %d\n", p->package_id); |
| |
| outp += sprintf(outp, "Weighted cores: %016llX\n", p->pkg_wtd_core_c0); |
| outp += sprintf(outp, "Any cores: %016llX\n", p->pkg_any_core_c0); |
| outp += sprintf(outp, "Any GFX: %016llX\n", p->pkg_any_gfxe_c0); |
| outp += sprintf(outp, "CPU + GFX: %016llX\n", p->pkg_both_core_gfxe_c0); |
| |
| outp += sprintf(outp, "pc2: %016llX\n", p->pc2); |
| if (DO_BIC(BIC_Pkgpc3)) |
| outp += sprintf(outp, "pc3: %016llX\n", p->pc3); |
| if (DO_BIC(BIC_Pkgpc6)) |
| outp += sprintf(outp, "pc6: %016llX\n", p->pc6); |
| if (DO_BIC(BIC_Pkgpc7)) |
| outp += sprintf(outp, "pc7: %016llX\n", p->pc7); |
| outp += sprintf(outp, "pc8: %016llX\n", p->pc8); |
| outp += sprintf(outp, "pc9: %016llX\n", p->pc9); |
| outp += sprintf(outp, "pc10: %016llX\n", p->pc10); |
| outp += sprintf(outp, "pc10: %016llX\n", p->pc10); |
| outp += sprintf(outp, "cpu_lpi: %016llX\n", p->cpu_lpi); |
| outp += sprintf(outp, "sys_lpi: %016llX\n", p->sys_lpi); |
| outp += sprintf(outp, "Joules PKG: %0X\n", p->energy_pkg); |
| outp += sprintf(outp, "Joules COR: %0X\n", p->energy_cores); |
| outp += sprintf(outp, "Joules GFX: %0X\n", p->energy_gfx); |
| outp += sprintf(outp, "Joules RAM: %0X\n", p->energy_dram); |
| outp += sprintf(outp, "Throttle PKG: %0X\n", |
| p->rapl_pkg_perf_status); |
| outp += sprintf(outp, "Throttle RAM: %0X\n", |
| p->rapl_dram_perf_status); |
| outp += sprintf(outp, "PTM: %dC\n", p->pkg_temp_c); |
| |
| for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) { |
| outp += sprintf(outp, "pADDED [%d] msr0x%x: %08llX\n", |
| i, mp->msr_num, p->counter[i]); |
| } |
| } |
| |
| outp += sprintf(outp, "\n"); |
| |
| return 0; |
| } |
| |
| /* |
| * column formatting convention & formats |
| */ |
| int format_counters(struct thread_data *t, struct core_data *c, |
| struct pkg_data *p) |
| { |
| double interval_float, tsc; |
| char *fmt8; |
| int i; |
| struct msr_counter *mp; |
| char *delim = "\t"; |
| int printed = 0; |
| |
| /* if showing only 1st thread in core and this isn't one, bail out */ |
| if (show_core_only && !(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) |
| return 0; |
| |
| /* if showing only 1st thread in pkg and this isn't one, bail out */ |
| if (show_pkg_only && !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) |
| return 0; |
| |
| /*if not summary line and --cpu is used */ |
| if ((t != &average.threads) && |
| (cpu_subset && !CPU_ISSET_S(t->cpu_id, cpu_subset_size, cpu_subset))) |
| return 0; |
| |
| if (DO_BIC(BIC_USEC)) { |
| /* on each row, print how many usec each timestamp took to gather */ |
| struct timeval tv; |
| |
| timersub(&t->tv_end, &t->tv_begin, &tv); |
| outp += sprintf(outp, "%5ld\t", tv.tv_sec * 1000000 + tv.tv_usec); |
| } |
| |
| /* Time_Of_Day_Seconds: on each row, print sec.usec last timestamp taken */ |
| if (DO_BIC(BIC_TOD)) |
| outp += sprintf(outp, "%10ld.%06ld\t", t->tv_end.tv_sec, t->tv_end.tv_usec); |
| |
| interval_float = tv_delta.tv_sec + tv_delta.tv_usec/1000000.0; |
| |
| tsc = t->tsc * tsc_tweak; |
| |
| /* topo columns, print blanks on 1st (average) line */ |
| if (t == &average.threads) { |
| if (DO_BIC(BIC_Package)) |
| outp += sprintf(outp, "%s-", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_Node)) |
| outp += sprintf(outp, "%s-", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_Core)) |
| outp += sprintf(outp, "%s-", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_CPU)) |
| outp += sprintf(outp, "%s-", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_APIC)) |
| outp += sprintf(outp, "%s-", (printed++ ? delim : "")); |
| if (DO_BIC(BIC_X2APIC)) |
| outp += sprintf(outp, "%s-", (printed++ ? delim : "")); |
| } else { |
| if (DO_BIC(BIC_Package)) { |
| if (p) |
| outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), p->package_id); |
| else |
| outp += sprintf(outp, "%s-", (printed++ ? delim : "")); |
| } |
| if (DO_BIC(BIC_Node)) { |
| if (t) |
| outp += sprintf(outp, "%s%d", |
| (printed++ ? delim : ""), |
| cpus[t->cpu_id].physical_node_id); |
| else |
| outp += sprintf(outp, "%s-", |
| (printed++ ? delim : "")); |
| } |
| if (DO_BIC(BIC_Core)) { |
| if (c) |
| outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), c->core_id); |
| else |
| outp += sprintf(outp, "%s-", (printed++ ? delim : "")); |
| } |
| if (DO_BIC(BIC_CPU)) |
| outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), t->cpu_id); |
| if (DO_BIC(BIC_APIC)) |
| outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), t->apic_id); |
| if (DO_BIC(BIC_X2APIC)) |
| outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), t->x2apic_id); |
| } |
| |
| if (DO_BIC(BIC_Avg_MHz)) |
| outp += sprintf(outp, "%s%.0f", (printed++ ? delim : ""), |
| 1.0 / units * t->aperf / interval_float); |
| |
| if (DO_BIC(BIC_Busy)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * t->mperf/tsc); |
| |
| if (DO_BIC(BIC_Bzy_MHz)) { |
| if (has_base_hz) |
| outp += sprintf(outp, "%s%.0f", (printed++ ? delim : ""), base_hz / units * t->aperf / t->mperf); |
| else |
| outp += sprintf(outp, "%s%.0f", (printed++ ? delim : ""), |
| tsc / units * t->aperf / t->mperf / interval_float); |
| } |
| |
| if (DO_BIC(BIC_TSC_MHz)) |
| outp += sprintf(outp, "%s%.0f", (printed++ ? delim : ""), 1.0 * t->tsc/units/interval_float); |
| |
| /* IRQ */ |
| if (DO_BIC(BIC_IRQ)) { |
| if (sums_need_wide_columns) |
| outp += sprintf(outp, "%s%8lld", (printed++ ? delim : ""), t->irq_count); |
| else |
| outp += sprintf(outp, "%s%lld", (printed++ ? delim : ""), t->irq_count); |
| } |
| |
| /* SMI */ |
| if (DO_BIC(BIC_SMI)) |
| outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), t->smi_count); |
| |
| /* Added counters */ |
| for (i = 0, mp = sys.tp; mp; i++, mp = mp->next) { |
| if (mp->format == FORMAT_RAW) { |
| if (mp->width == 32) |
| outp += sprintf(outp, "%s0x%08x", (printed++ ? delim : ""), (unsigned int) t->counter[i]); |
| else |
| outp += sprintf(outp, "%s0x%016llx", (printed++ ? delim : ""), t->counter[i]); |
| } else if (mp->format == FORMAT_DELTA) { |
| if ((mp->type == COUNTER_ITEMS) && sums_need_wide_columns) |
| outp += sprintf(outp, "%s%8lld", (printed++ ? delim : ""), t->counter[i]); |
| else |
| outp += sprintf(outp, "%s%lld", (printed++ ? delim : ""), t->counter[i]); |
| } else if (mp->format == FORMAT_PERCENT) { |
| if (mp->type == COUNTER_USEC) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), t->counter[i]/interval_float/10000); |
| else |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * t->counter[i]/tsc); |
| } |
| } |
| |
| /* C1 */ |
| if (DO_BIC(BIC_CPU_c1)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * t->c1/tsc); |
| |
| |
| /* print per-core data only for 1st thread in core */ |
| if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) |
| goto done; |
| |
| if (DO_BIC(BIC_CPU_c3) && !do_slm_cstates && !do_knl_cstates && !do_cnl_cstates) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * c->c3/tsc); |
| if (DO_BIC(BIC_CPU_c6)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * c->c6/tsc); |
| if (DO_BIC(BIC_CPU_c7)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * c->c7/tsc); |
| |
| /* Mod%c6 */ |
| if (DO_BIC(BIC_Mod_c6)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * c->mc6_us / tsc); |
| |
| if (DO_BIC(BIC_CoreTmp)) |
| outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), c->core_temp_c); |
| |
| for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) { |
| if (mp->format == FORMAT_RAW) { |
| if (mp->width == 32) |
| outp += sprintf(outp, "%s0x%08x", (printed++ ? delim : ""), (unsigned int) c->counter[i]); |
| else |
| outp += sprintf(outp, "%s0x%016llx", (printed++ ? delim : ""), c->counter[i]); |
| } else if (mp->format == FORMAT_DELTA) { |
| if ((mp->type == COUNTER_ITEMS) && sums_need_wide_columns) |
| outp += sprintf(outp, "%s%8lld", (printed++ ? delim : ""), c->counter[i]); |
| else |
| outp += sprintf(outp, "%s%lld", (printed++ ? delim : ""), c->counter[i]); |
| } else if (mp->format == FORMAT_PERCENT) { |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * c->counter[i]/tsc); |
| } |
| } |
| |
| /* print per-package data only for 1st core in package */ |
| if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) |
| goto done; |
| |
| /* PkgTmp */ |
| if (DO_BIC(BIC_PkgTmp)) |
| outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), p->pkg_temp_c); |
| |
| /* GFXrc6 */ |
| if (DO_BIC(BIC_GFX_rc6)) { |
| if (p->gfx_rc6_ms == -1) { /* detect GFX counter reset */ |
| outp += sprintf(outp, "%s**.**", (printed++ ? delim : "")); |
| } else { |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), |
| p->gfx_rc6_ms / 10.0 / interval_float); |
| } |
| } |
| |
| /* GFXMHz */ |
| if (DO_BIC(BIC_GFXMHz)) |
| outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), p->gfx_mhz); |
| |
| /* Totl%C0, Any%C0 GFX%C0 CPUGFX% */ |
| if (DO_BIC(BIC_Totl_c0)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pkg_wtd_core_c0/tsc); |
| if (DO_BIC(BIC_Any_c0)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pkg_any_core_c0/tsc); |
| if (DO_BIC(BIC_GFX_c0)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pkg_any_gfxe_c0/tsc); |
| if (DO_BIC(BIC_CPUGFX)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pkg_both_core_gfxe_c0/tsc); |
| |
| if (DO_BIC(BIC_Pkgpc2)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pc2/tsc); |
| if (DO_BIC(BIC_Pkgpc3)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pc3/tsc); |
| if (DO_BIC(BIC_Pkgpc6)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pc6/tsc); |
| if (DO_BIC(BIC_Pkgpc7)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pc7/tsc); |
| if (DO_BIC(BIC_Pkgpc8)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pc8/tsc); |
| if (DO_BIC(BIC_Pkgpc9)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pc9/tsc); |
| if (DO_BIC(BIC_Pkgpc10)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pc10/tsc); |
| |
| if (DO_BIC(BIC_CPU_LPI)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->cpu_lpi / 1000000.0 / interval_float); |
| if (DO_BIC(BIC_SYS_LPI)) |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->sys_lpi / 1000000.0 / interval_float); |
| |
| /* |
| * If measurement interval exceeds minimum RAPL Joule Counter range, |
| * indicate that results are suspect by printing "**" in fraction place. |
| */ |
| if (interval_float < rapl_joule_counter_range) |
| fmt8 = "%s%.2f"; |
| else |
| fmt8 = "%6.0f**"; |
| |
| if (DO_BIC(BIC_PkgWatt)) |
| outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_pkg * rapl_energy_units / interval_float); |
| if (DO_BIC(BIC_CorWatt)) |
| outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_cores * rapl_energy_units / interval_float); |
| if (DO_BIC(BIC_GFXWatt)) |
| outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_gfx * rapl_energy_units / interval_float); |
| if (DO_BIC(BIC_RAMWatt)) |
| outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_dram * rapl_dram_energy_units / interval_float); |
| if (DO_BIC(BIC_Pkg_J)) |
| outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_pkg * rapl_energy_units); |
| if (DO_BIC(BIC_Cor_J)) |
| outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_cores * rapl_energy_units); |
| if (DO_BIC(BIC_GFX_J)) |
| outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_gfx * rapl_energy_units); |
| if (DO_BIC(BIC_RAM_J)) |
| outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_dram * rapl_dram_energy_units); |
| if (DO_BIC(BIC_PKG__)) |
| outp += sprintf(outp, fmt8, (printed++ ? delim : ""), 100.0 * p->rapl_pkg_perf_status * rapl_time_units / interval_float); |
| if (DO_BIC(BIC_RAM__)) |
| outp += sprintf(outp, fmt8, (printed++ ? delim : ""), 100.0 * p->rapl_dram_perf_status * rapl_time_units / interval_float); |
| |
| for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) { |
| if (mp->format == FORMAT_RAW) { |
| if (mp->width == 32) |
| outp += sprintf(outp, "%s0x%08x", (printed++ ? delim : ""), (unsigned int) p->counter[i]); |
| else |
| outp += sprintf(outp, "%s0x%016llx", (printed++ ? delim : ""), p->counter[i]); |
| } else if (mp->format == FORMAT_DELTA) { |
| if ((mp->type == COUNTER_ITEMS) && sums_need_wide_columns) |
| outp += sprintf(outp, "%s%8lld", (printed++ ? delim : ""), p->counter[i]); |
| else |
| outp += sprintf(outp, "%s%lld", (printed++ ? delim : ""), p->counter[i]); |
| } else if (mp->format == FORMAT_PERCENT) { |
| outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->counter[i]/tsc); |
| } |
| } |
| |
| done: |
| if (*(outp - 1) != '\n') |
| outp += sprintf(outp, "\n"); |
| |
| return 0; |
| } |
| |
| void flush_output_stdout(void) |
| { |
| FILE *filep; |
| |
| if (outf == stderr) |
| filep = stdout; |
| else |
| filep = outf; |
| |
| fputs(output_buffer, filep); |
| fflush(filep); |
| |
| outp = output_buffer; |
| } |
| void flush_output_stderr(void) |
| { |
| fputs(output_buffer, outf); |
| fflush(outf); |
| outp = output_buffer; |
| } |
| void format_all_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p) |
| { |
| static int printed; |
| |
| if (!printed || !summary_only) |
| print_header("\t"); |
| |
| format_counters(&average.threads, &average.cores, &average.packages); |
| |
| printed = 1; |
| |
| if (summary_only) |
| return; |
| |
| for_all_cpus(format_counters, t, c, p); |
| } |
| |
| #define DELTA_WRAP32(new, old) \ |
| if (new > old) { \ |
| old = new - old; \ |
| } else { \ |
| old = 0x100000000 + new - old; \ |
| } |
| |
| int |
| delta_package(struct pkg_data *new, struct pkg_data *old) |
| { |
| int i; |
| struct msr_counter *mp; |
| |
| |
| if (DO_BIC(BIC_Totl_c0)) |
| old->pkg_wtd_core_c0 = new->pkg_wtd_core_c0 - old->pkg_wtd_core_c0; |
| if (DO_BIC(BIC_Any_c0)) |
| old->pkg_any_core_c0 = new->pkg_any_core_c0 - old->pkg_any_core_c0; |
| if (DO_BIC(BIC_GFX_c0)) |
| old->pkg_any_gfxe_c0 = new->pkg_any_gfxe_c0 - old->pkg_any_gfxe_c0; |
| if (DO_BIC(BIC_CPUGFX)) |
| old->pkg_both_core_gfxe_c0 = new->pkg_both_core_gfxe_c0 - old->pkg_both_core_gfxe_c0; |
| |
| old->pc2 = new->pc2 - old->pc2; |
| if (DO_BIC(BIC_Pkgpc3)) |
| old->pc3 = new->pc3 - old->pc3; |
| if (DO_BIC(BIC_Pkgpc6)) |
| old->pc6 = new->pc6 - old->pc6; |
| if (DO_BIC(BIC_Pkgpc7)) |
| old->pc7 = new->pc7 - old->pc7; |
| old->pc8 = new->pc8 - old->pc8; |
| old->pc9 = new->pc9 - old->pc9; |
| old->pc10 = new->pc10 - old->pc10; |
| old->cpu_lpi = new->cpu_lpi - old->cpu_lpi; |
| old->sys_lpi = new->sys_lpi - old->sys_lpi; |
| old->pkg_temp_c = new->pkg_temp_c; |
| |
| /* flag an error when rc6 counter resets/wraps */ |
| if (old->gfx_rc6_ms > new->gfx_rc6_ms) |
| old->gfx_rc6_ms = -1; |
| else |
| old->gfx_rc6_ms = new->gfx_rc6_ms - old->gfx_rc6_ms; |
| |
| old->gfx_mhz = new->gfx_mhz; |
| |
| DELTA_WRAP32(new->energy_pkg, old->energy_pkg); |
| DELTA_WRAP32(new->energy_cores, old->energy_cores); |
| DELTA_WRAP32(new->energy_gfx, old->energy_gfx); |
| DELTA_WRAP32(new->energy_dram, old->energy_dram); |
| DELTA_WRAP32(new->rapl_pkg_perf_status, old->rapl_pkg_perf_status); |
| DELTA_WRAP32(new->rapl_dram_perf_status, old->rapl_dram_perf_status); |
| |
| for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) { |
| if (mp->format == FORMAT_RAW) |
| old->counter[i] = new->counter[i]; |
| else |
| old->counter[i] = new->counter[i] - old->counter[i]; |
| } |
| |
| return 0; |
| } |
| |
| void |
| delta_core(struct core_data *new, struct core_data *old) |
| { |
| int i; |
| struct msr_counter *mp; |
| |
| old->c3 = new->c3 - old->c3; |
| old->c6 = new->c6 - old->c6; |
| old->c7 = new->c7 - old->c7; |
| old->core_temp_c = new->core_temp_c; |
| old->mc6_us = new->mc6_us - old->mc6_us; |
| |
| for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) { |
| if (mp->format == FORMAT_RAW) |
| old->counter[i] = new->counter[i]; |
| else |
| old->counter[i] = new->counter[i] - old->counter[i]; |
| } |
| } |
| |
| /* |
| * old = new - old |
| */ |
| int |
| delta_thread(struct thread_data *new, struct thread_data *old, |
| struct core_data *core_delta) |
| { |
| int i; |
| struct msr_counter *mp; |
| |
| /* we run cpuid just the 1st time, copy the results */ |
| if (DO_BIC(BIC_APIC)) |
| new->apic_id = old->apic_id; |
| if (DO_BIC(BIC_X2APIC)) |
| new->x2apic_id = old->x2apic_id; |
| |
| /* |
| * the timestamps from start of measurement interval are in "old" |
| * the timestamp from end of measurement interval are in "new" |
| * over-write old w/ new so we can print end of interval values |
| */ |
| |
| old->tv_begin = new->tv_begin; |
| old->tv_end = new->tv_end; |
| |
| old->tsc = new->tsc - old->tsc; |
| |
| /* check for TSC < 1 Mcycles over interval */ |
| if (old->tsc < (1000 * 1000)) |
| errx(-3, "Insanely slow TSC rate, TSC stops in idle?\n" |
| "You can disable all c-states by booting with \"idle=poll\"\n" |
| "or just the deep ones with \"processor.max_cstate=1\""); |
| |
| old->c1 = new->c1 - old->c1; |
| |
| if (DO_BIC(BIC_Avg_MHz) || DO_BIC(BIC_Busy) || DO_BIC(BIC_Bzy_MHz)) { |
| if ((new->aperf > old->aperf) && (new->mperf > old->mperf)) { |
| old->aperf = new->aperf - old->aperf; |
| old->mperf = new->mperf - old->mperf; |
| } else { |
| return -1; |
| } |
| } |
| |
| |
| if (use_c1_residency_msr) { |
| /* |
| * Some models have a dedicated C1 residency MSR, |
| * which should be more accurate than the derivation below. |
| */ |
| } else { |
| /* |
| * As counter collection is not atomic, |
| * it is possible for mperf's non-halted cycles + idle states |
| * to exceed TSC's all cycles: show c1 = 0% in that case. |
| */ |
| if ((old->mperf + core_delta->c3 + core_delta->c6 + core_delta->c7) > (old->tsc * tsc_tweak)) |
| old->c1 = 0; |
| else { |
| /* normal case, derive c1 */ |
| old->c1 = (old->tsc * tsc_tweak) - old->mperf - core_delta->c3 |
| - core_delta->c6 - core_delta->c7; |
| } |
| } |
| |
| if (old->mperf == 0) { |
| if (debug > 1) |
| fprintf(outf, "cpu%d MPERF 0!\n", old->cpu_id); |
| old->mperf = 1; /* divide by 0 protection */ |
| } |
| |
| if (DO_BIC(BIC_IRQ)) |
| old->irq_count = new->irq_count - old->irq_count; |
| |
| if (DO_BIC(BIC_SMI)) |
| old->smi_count = new->smi_count - old->smi_count; |
| |
| for (i = 0, mp = sys.tp; mp; i++, mp = mp->next) { |
| if (mp->format == FORMAT_RAW) |
| old->counter[i] = new->counter[i]; |
| else |
| old->counter[i] = new->counter[i] - old->counter[i]; |
| } |
| return 0; |
| } |
| |
| int delta_cpu(struct thread_data *t, struct core_data *c, |
| struct pkg_data *p, struct thread_data *t2, |
| struct core_data *c2, struct pkg_data *p2) |
| { |
| int retval = 0; |
| |
| /* calculate core delta only for 1st thread in core */ |
| if (t->flags & CPU_IS_FIRST_THREAD_IN_CORE) |
| delta_core(c, c2); |
| |
| /* always calculate thread delta */ |
| retval = delta_thread(t, t2, c2); /* c2 is core delta */ |
| if (retval) |
| return retval; |
| |
| /* calculate package delta only for 1st core in package */ |
| if (t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE) |
| retval = delta_package(p, p2); |
| |
| return retval; |
| } |
| |
| void clear_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p) |
| { |
| int i; |
| struct msr_counter *mp; |
| |
| t->tv_begin.tv_sec = 0; |
| t->tv_begin.tv_usec = 0; |
| t->tv_end.tv_sec = 0; |
| t->tv_end.tv_usec = 0; |
| |
| t->tsc = 0; |
| t->aperf = 0; |
| t->mperf = 0; |
| t->c1 = 0; |
| |
| t->irq_count = 0; |
| t->smi_count = 0; |
| |
| /* tells format_counters to dump all fields from this set */ |
| t->flags = CPU_IS_FIRST_THREAD_IN_CORE | CPU_IS_FIRST_CORE_IN_PACKAGE; |
| |
| c->c3 = 0; |
| c->c6 = 0; |
| c->c7 = 0; |
| c->mc6_us = 0; |
| c->core_temp_c = 0; |
| |
| p->pkg_wtd_core_c0 = 0; |
| p->pkg_any_core_c0 = 0; |
| p->pkg_any_gfxe_c0 = 0; |
| p->pkg_both_core_gfxe_c0 = 0; |
| |
| p->pc2 = 0; |
| if (DO_BIC(BIC_Pkgpc3)) |
| p->pc3 = 0; |
| if (DO_BIC(BIC_Pkgpc6)) |
| p->pc6 = 0; |
| if (DO_BIC(BIC_Pkgpc7)) |
| p->pc7 = 0; |
| p->pc8 = 0; |
| p->pc9 = 0; |
| p->pc10 = 0; |
| p->cpu_lpi = 0; |
| p->sys_lpi = 0; |
| |
| p->energy_pkg = 0; |
| p->energy_dram = 0; |
| p->energy_cores = 0; |
| p->energy_gfx = 0; |
| p->rapl_pkg_perf_status = 0; |
| p->rapl_dram_perf_status = 0; |
| p->pkg_temp_c = 0; |
| |
| p->gfx_rc6_ms = 0; |
| p->gfx_mhz = 0; |
| for (i = 0, mp = sys.tp; mp; i++, mp = mp->next) |
| t->counter[i] = 0; |
| |
| for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) |
| c->counter[i] = 0; |
| |
| for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) |
| p->counter[i] = 0; |
| } |
| int sum_counters(struct thread_data *t, struct core_data *c, |
| struct pkg_data *p) |
| { |
| int i; |
| struct msr_counter *mp; |
| |
| /* copy un-changing apic_id's */ |
| if (DO_BIC(BIC_APIC)) |
| average.threads.apic_id = t->apic_id; |
| if (DO_BIC(BIC_X2APIC)) |
| average.threads.x2apic_id = t->x2apic_id; |
| |
| /* remember first tv_begin */ |
| if (average.threads.tv_begin.tv_sec == 0) |
| average.threads.tv_begin = t->tv_begin; |
| |
| /* remember last tv_end */ |
| average.threads.tv_end = t->tv_end; |
| |
| average.threads.tsc += t->tsc; |
| average.threads.aperf += t->aperf; |
| average.threads.mperf += t->mperf; |
| average.threads.c1 += t->c1; |
| |
| average.threads.irq_count += t->irq_count; |
| average.threads.smi_count += t->smi_count; |
| |
| for (i = 0, mp = sys.tp; mp; i++, mp = mp->next) { |
| if (mp->format == FORMAT_RAW) |
| continue; |
| average.threads.counter[i] += t->counter[i]; |
| } |
| |
| /* sum per-core values only for 1st thread in core */ |
| if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) |
| return 0; |
| |
| average.cores.c3 += c->c3; |
| average.cores.c6 += c->c6; |
| average.cores.c7 += c->c7; |
| average.cores.mc6_us += c->mc6_us; |
| |
| average.cores.core_temp_c = MAX(average.cores.core_temp_c, c->core_temp_c); |
| |
| for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) { |
| if (mp->format == FORMAT_RAW) |
| continue; |
| average.cores.counter[i] += c->counter[i]; |
| } |
| |
| /* sum per-pkg values only for 1st core in pkg */ |
| if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) |
| return 0; |
| |
| if (DO_BIC(BIC_Totl_c0)) |
| average.packages.pkg_wtd_core_c0 += p->pkg_wtd_core_c0; |
| if (DO_BIC(BIC_Any_c0)) |
| average.packages.pkg_any_core_c0 += p->pkg_any_core_c0; |
| if (DO_BIC(BIC_GFX_c0)) |
| average.packages.pkg_any_gfxe_c0 += p->pkg_any_gfxe_c0; |
| if (DO_BIC(BIC_CPUGFX)) |
| average.packages.pkg_both_core_gfxe_c0 += p->pkg_both_core_gfxe_c0; |
| |
| average.packages.pc2 += p->pc2; |
| if (DO_BIC(BIC_Pkgpc3)) |
| average.packages.pc3 += p->pc3; |
| if (DO_BIC(BIC_Pkgpc6)) |
| average.packages.pc6 += p->pc6; |
| if (DO_BIC(BIC_Pkgpc7)) |
| average.packages.pc7 += p->pc7; |
| average.packages.pc8 += p->pc8; |
| average.packages.pc9 += p->pc9; |
| average.packages.pc10 += p->pc10; |
| |
| average.packages.cpu_lpi = p->cpu_lpi; |
| average.packages.sys_lpi = p->sys_lpi; |
| |
| average.packages.energy_pkg += p->energy_pkg; |
| average.packages.energy_dram += p->energy_dram; |
| average.packages.energy_cores += p->energy_cores; |
| average.packages.energy_gfx += p->energy_gfx; |
| |
| average.packages.gfx_rc6_ms = p->gfx_rc6_ms; |
| average.packages.gfx_mhz = p->gfx_mhz; |
| |
| average.packages.pkg_temp_c = MAX(average.packages.pkg_temp_c, p->pkg_temp_c); |
| |
| average.packages.rapl_pkg_perf_status += p->rapl_pkg_perf_status; |
| average.packages.rapl_dram_perf_status += p->rapl_dram_perf_status; |
| |
| for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) { |
| if (mp->format == FORMAT_RAW) |
| continue; |
| average.packages.counter[i] += p->counter[i]; |
| } |
| return 0; |
| } |
| /* |
| * sum the counters for all cpus in the system |
| * compute the weighted average |
| */ |
| void compute_average(struct thread_data *t, struct core_data *c, |
| struct pkg_data *p) |
| { |
| int i; |
| struct msr_counter *mp; |
| |
| clear_counters(&average.threads, &average.cores, &average.packages); |
| |
| for_all_cpus(sum_counters, t, c, p); |
| |
| average.threads.tsc /= topo.num_cpus; |
| average.threads.aperf /= topo.num_cpus; |
| average.threads.mperf /= topo.num_cpus; |
| average.threads.c1 /= topo.num_cpus; |
| |
| if (average.threads.irq_count > 9999999) |
| sums_need_wide_columns = 1; |
| |
| average.cores.c3 /= topo.num_cores; |
| average.cores.c6 /= topo.num_cores; |
| average.cores.c7 /= topo.num_cores; |
| average.cores.mc6_us /= topo.num_cores; |
| |
| if (DO_BIC(BIC_Totl_c0)) |
| average.packages.pkg_wtd_core_c0 /= topo.num_packages; |
| if (DO_BIC(BIC_Any_c0)) |
| average.packages.pkg_any_core_c0 /= topo.num_packages; |
| if (DO_BIC(BIC_GFX_c0)) |
| average.packages.pkg_any_gfxe_c0 /= topo.num_packages; |
| if (DO_BIC(BIC_CPUGFX)) |
| average.packages.pkg_both_core_gfxe_c0 /= topo.num_packages; |
| |
| average.packages.pc2 /= topo.num_packages; |
| if (DO_BIC(BIC_Pkgpc3)) |
| average.packages.pc3 /= topo.num_packages; |
| if (DO_BIC(BIC_Pkgpc6)) |
| average.packages.pc6 /= topo.num_packages; |
| if (DO_BIC(BIC_Pkgpc7)) |
| average.packages.pc7 /= topo.num_packages; |
| |
| average.packages.pc8 /= topo.num_packages; |
| average.packages.pc9 /= topo.num_packages; |
| average.packages.pc10 /= topo.num_packages; |
| |
| for (i = 0, mp = sys.tp; mp; i++, mp = mp->next) { |
| if (mp->format == FORMAT_RAW) |
| continue; |
| if (mp->type == COUNTER_ITEMS) { |
| if (average.threads.counter[i] > 9999999) |
| sums_need_wide_columns = 1; |
| continue; |
| } |
| average.threads.counter[i] /= topo.num_cpus; |
| } |
| for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) { |
| if (mp->format == FORMAT_RAW) |
| continue; |
| if (mp->type == COUNTER_ITEMS) { |
| if (average.cores.counter[i] > 9999999) |
| sums_need_wide_columns = 1; |
| } |
| average.cores.counter[i] /= topo.num_cores; |
| } |
| for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) { |
| if (mp->format == FORMAT_RAW) |
| continue; |
| if (mp->type == COUNTER_ITEMS) { |
| if (average.packages.counter[i] > 9999999) |
| sums_need_wide_columns = 1; |
| } |
| average.packages.counter[i] /= topo.num_packages; |
| } |
| } |
| |
| static unsigned long long rdtsc(void) |
| { |
| unsigned int low, high; |
| |
| asm volatile("rdtsc" : "=a" (low), "=d" (high)); |
| |
| return low | ((unsigned long long)high) << 32; |
| } |
| |
| /* |
| * Open a file, and exit on failure |
| */ |
| FILE *fopen_or_die(const char *path, const char *mode) |
| { |
| FILE *filep = fopen(path, mode); |
| |
| if (!filep) |
| err(1, "%s: open failed", path); |
| return filep; |
| } |
| /* |
| * snapshot_sysfs_counter() |
| * |
| * return snapshot of given counter |
| */ |
| unsigned long long snapshot_sysfs_counter(char *path) |
| { |
| FILE *fp; |
| int retval; |
| unsigned long long counter; |
| |
| fp = fopen_or_die(path, "r"); |
| |
| retval = fscanf(fp, "%lld", &counter); |
| if (retval != 1) |
| err(1, "snapshot_sysfs_counter(%s)", path); |
| |
| fclose(fp); |
| |
| return counter; |
| } |
| |
| int get_mp(int cpu, struct msr_counter *mp, unsigned long long *counterp) |
| { |
| if (mp->msr_num != 0) { |
| if (get_msr(cpu, mp->msr_num, counterp)) |
| return -1; |
| } else { |
| char path[128 + PATH_BYTES]; |
| |
| if (mp->flags & SYSFS_PERCPU) { |
| sprintf(path, "/sys/devices/system/cpu/cpu%d/%s", |
| cpu, mp->path); |
| |
| *counterp = snapshot_sysfs_counter(path); |
| } else { |
| *counterp = snapshot_sysfs_counter(mp->path); |
| } |
| } |
| |
| return 0; |
| } |
| |
| void get_apic_id(struct thread_data *t) |
| { |
| unsigned int eax, ebx, ecx, edx; |
| |
| if (DO_BIC(BIC_APIC)) { |
| eax = ebx = ecx = edx = 0; |
| __cpuid(1, eax, ebx, ecx, edx); |
| |
| t->apic_id = (ebx >> 24) & 0xff; |
| } |
| |
| if (!DO_BIC(BIC_X2APIC)) |
| return; |
| |
| if (authentic_amd) { |
| unsigned int topology_extensions; |
| |
| if (max_extended_level < 0x8000001e) |
| return; |
| |
| eax = ebx = ecx = edx = 0; |
| __cpuid(0x80000001, eax, ebx, ecx, edx); |
| topology_extensions = ecx & (1 << 22); |
| |
| if (topology_extensions == 0) |
| return; |
| |
| eax = ebx = ecx = edx = 0; |
| __cpuid(0x8000001e, eax, ebx, ecx, edx); |
| |
| t->x2apic_id = eax; |
| return; |
| } |
| |
| if (!genuine_intel) |
| return; |
| |
| if (max_level < 0xb) |
| return; |
| |
| ecx = 0; |
| __cpuid(0xb, eax, ebx, ecx, edx); |
| t->x2apic_id = edx; |
| |
| if (debug && (t->apic_id != (t->x2apic_id & 0xff))) |
| fprintf(outf, "cpu%d: BIOS BUG: apic 0x%x x2apic 0x%x\n", |
| t->cpu_id, t->apic_id, t->x2apic_id); |
| } |
| |
| /* |
| * get_counters(...) |
| * migrate to cpu |
| * acquire and record local counters for that cpu |
| */ |
| int get_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p) |
| { |
| int cpu = t->cpu_id; |
| unsigned long long msr; |
| int aperf_mperf_retry_count = 0; |
| struct msr_counter *mp; |
| int i; |
| |
| gettimeofday(&t->tv_begin, (struct timezone *)NULL); |
| |
| if (cpu_migrate(cpu)) { |
| fprintf(outf, "Could not migrate to CPU %d\n", cpu); |
| return -1; |
| } |
| |
| if (first_counter_read) |
| get_apic_id(t); |
| retry: |
| t->tsc = rdtsc(); /* we are running on local CPU of interest */ |
| |
| if (DO_BIC(BIC_Avg_MHz) || DO_BIC(BIC_Busy) || DO_BIC(BIC_Bzy_MHz)) { |
| unsigned long long tsc_before, tsc_between, tsc_after, aperf_time, mperf_time; |
| |
| /* |
| * The TSC, APERF and MPERF must be read together for |
| * APERF/MPERF and MPERF/TSC to give accurate results. |
| * |
| * Unfortunately, APERF and MPERF are read by |
| * individual system call, so delays may occur |
| * between them. If the time to read them |
| * varies by a large amount, we re-read them. |
| */ |
| |
| /* |
| * This initial dummy APERF read has been seen to |
| * reduce jitter in the subsequent reads. |
| */ |
| |
| if (get_msr(cpu, MSR_IA32_APERF, &t->aperf)) |
| return -3; |
| |
| t->tsc = rdtsc(); /* re-read close to APERF */ |
| |
| tsc_before = t->tsc; |
| |
| if (get_msr(cpu, MSR_IA32_APERF, &t->aperf)) |
| return -3; |
| |
| tsc_between = rdtsc(); |
| |
| if (get_msr(cpu, MSR_IA32_MPERF, &t->mperf)) |
| return -4; |
| |
| tsc_after = rdtsc(); |
| |
| aperf_time = tsc_between - tsc_before; |
| mperf_time = tsc_after - tsc_between; |
| |
| /* |
| * If the system call latency to read APERF and MPERF |
| * differ by more than 2x, then try again. |
| */ |
| if ((aperf_time > (2 * mperf_time)) || (mperf_time > (2 * aperf_time))) { |
| aperf_mperf_retry_count++; |
| if (aperf_mperf_retry_count < 5) |
| goto retry; |
| else |
| warnx("cpu%d jitter %lld %lld", |
| cpu, aperf_time, mperf_time); |
| } |
| aperf_mperf_retry_count = 0; |
| |
| t->aperf = t->aperf * aperf_mperf_multiplier; |
| t->mperf = t->mperf * aperf_mperf_multiplier; |
| } |
| |
| if (DO_BIC(BIC_IRQ)) |
| t->irq_count = irqs_per_cpu[cpu]; |
| if (DO_BIC(BIC_SMI)) { |
| if (get_msr(cpu, MSR_SMI_COUNT, &msr)) |
| return -5; |
| t->smi_count = msr & 0xFFFFFFFF; |
| } |
| if (DO_BIC(BIC_CPU_c1) && use_c1_residency_msr) { |
| if (get_msr(cpu, MSR_CORE_C1_RES, &t->c1)) |
| return -6; |
| } |
| |
| for (i = 0, mp = sys.tp; mp; i++, mp = mp->next) { |
| if (get_mp(cpu, mp, &t->counter[i])) |
| return -10; |
| } |
| |
| /* collect core counters only for 1st thread in core */ |
| if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) |
| goto done; |
| |
| if (DO_BIC(BIC_CPU_c3) && !do_slm_cstates && !do_knl_cstates && !do_cnl_cstates) { |
| if (get_msr(cpu, MSR_CORE_C3_RESIDENCY, &c->c3)) |
| return -6; |
| } |
| |
| if (DO_BIC(BIC_CPU_c6) && !do_knl_cstates) { |
| if (get_msr(cpu, MSR_CORE_C6_RESIDENCY, &c->c6)) |
| return -7; |
| } else if (do_knl_cstates) { |
| if (get_msr(cpu, MSR_KNL_CORE_C6_RESIDENCY, &c->c6)) |
| return -7; |
| } |
| |
| if (DO_BIC(BIC_CPU_c7)) |
| if (get_msr(cpu, MSR_CORE_C7_RESIDENCY, &c->c7)) |
| return -8; |
| |
| if (DO_BIC(BIC_Mod_c6)) |
| if (get_msr(cpu, MSR_MODULE_C6_RES_MS, &c->mc6_us)) |
| return -8; |
| |
| if (DO_BIC(BIC_CoreTmp)) { |
| if (get_msr(cpu, MSR_IA32_THERM_STATUS, &msr)) |
| return -9; |
| c->core_temp_c = tcc_activation_temp - ((msr >> 16) & 0x7F); |
| } |
| |
| for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) { |
| if (get_mp(cpu, mp, &c->counter[i])) |
| return -10; |
| } |
| |
| /* collect package counters only for 1st core in package */ |
| if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) |
| goto done; |
| |
| if (DO_BIC(BIC_Totl_c0)) { |
| if (get_msr(cpu, MSR_PKG_WEIGHTED_CORE_C0_RES, &p->pkg_wtd_core_c0)) |
| return -10; |
| } |
| if (DO_BIC(BIC_Any_c0)) { |
| if (get_msr(cpu, MSR_PKG_ANY_CORE_C0_RES, &p->pkg_any_core_c0)) |
| return -11; |
| } |
| if (DO_BIC(BIC_GFX_c0)) { |
| if (get_msr(cpu, MSR_PKG_ANY_GFXE_C0_RES, &p->pkg_any_gfxe_c0)) |
| return -12; |
| } |
| if (DO_BIC(BIC_CPUGFX)) { |
| if (get_msr(cpu, MSR_PKG_BOTH_CORE_GFXE_C0_RES, &p->pkg_both_core_gfxe_c0)) |
| return -13; |
| } |
| if (DO_BIC(BIC_Pkgpc3)) |
| if (get_msr(cpu, MSR_PKG_C3_RESIDENCY, &p->pc3)) |
| return -9; |
| if (DO_BIC(BIC_Pkgpc6)) { |
| if (do_slm_cstates) { |
| if (get_msr(cpu, MSR_ATOM_PKG_C6_RESIDENCY, &p->pc6)) |
| return -10; |
| } else { |
| if (get_msr(cpu, MSR_PKG_C6_RESIDENCY, &p->pc6)) |
| return -10; |
| } |
| } |
| |
| if (DO_BIC(BIC_Pkgpc2)) |
| if (get_msr(cpu, MSR_PKG_C2_RESIDENCY, &p->pc2)) |
| return -11; |
| if (DO_BIC(BIC_Pkgpc7)) |
| if (get_msr(cpu, MSR_PKG_C7_RESIDENCY, &p->pc7)) |
| return -12; |
| if (DO_BIC(BIC_Pkgpc8)) |
| if (get_msr(cpu, MSR_PKG_C8_RESIDENCY, &p->pc8)) |
| return -13; |
| if (DO_BIC(BIC_Pkgpc9)) |
| if (get_msr(cpu, MSR_PKG_C9_RESIDENCY, &p->pc9)) |
| return -13; |
| if (DO_BIC(BIC_Pkgpc10)) |
| if (get_msr(cpu, MSR_PKG_C10_RESIDENCY, &p->pc10)) |
| return -13; |
| |
| if (DO_BIC(BIC_CPU_LPI)) |
| p->cpu_lpi = cpuidle_cur_cpu_lpi_us; |
| if (DO_BIC(BIC_SYS_LPI)) |
| p->sys_lpi = cpuidle_cur_sys_lpi_us; |
| |
| if (do_rapl & RAPL_PKG) { |
| if (get_msr(cpu, MSR_PKG_ENERGY_STATUS, &msr)) |
| return -13; |
| p->energy_pkg = msr & 0xFFFFFFFF; |
| } |
| if (do_rapl & RAPL_CORES_ENERGY_STATUS) { |
| if (get_msr(cpu, MSR_PP0_ENERGY_STATUS, &msr)) |
| return -14; |
| p->energy_cores = msr & 0xFFFFFFFF; |
| } |
| if (do_rapl & RAPL_DRAM) { |
| if (get_msr(cpu, MSR_DRAM_ENERGY_STATUS, &msr)) |
| return -15; |
| p->energy_dram = msr & 0xFFFFFFFF; |
| } |
| if (do_rapl & RAPL_GFX) { |
| if (get_msr(cpu, MSR_PP1_ENERGY_STATUS, &msr)) |
| return -16; |
| p->energy_gfx = msr & 0xFFFFFFFF; |
| } |
| if (do_rapl & RAPL_PKG_PERF_STATUS) { |
| if (get_msr(cpu, MSR_PKG_PERF_STATUS, &msr)) |
| return -16; |
| p->rapl_pkg_perf_status = msr & 0xFFFFFFFF; |
| } |
| if (do_rapl & RAPL_DRAM_PERF_STATUS) { |
| if (get_msr(cpu, MSR_DRAM_PERF_STATUS, &msr)) |
| return -16; |
| p->rapl_dram_perf_status = msr & 0xFFFFFFFF; |
| } |
| if (DO_BIC(BIC_PkgTmp)) { |
| if (get_msr(cpu, MSR_IA32_PACKAGE_THERM_STATUS, &msr)) |
| return -17; |
| p->pkg_temp_c = tcc_activation_temp - ((msr >> 16) & 0x7F); |
| } |
| |
| if (DO_BIC(BIC_GFX_rc6)) |
| p->gfx_rc6_ms = gfx_cur_rc6_ms; |
| |
| if (DO_BIC(BIC_GFXMHz)) |
| p->gfx_mhz = gfx_cur_mhz; |
| |
| for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) { |
| if (get_mp(cpu, mp, &p->counter[i])) |
| return -10; |
| } |
| done: |
| gettimeofday(&t->tv_end, (struct timezone *)NULL); |
| |
| return 0; |
| } |
| |
| /* |
| * MSR_PKG_CST_CONFIG_CONTROL decoding for pkg_cstate_limit: |
| * If you change the values, note they are used both in comparisons |
| * (>= PCL__7) and to index pkg_cstate_limit_strings[]. |
| */ |
| |
| #define PCLUKN 0 /* Unknown */ |
| #define PCLRSV 1 /* Reserved */ |
| #define PCL__0 2 /* PC0 */ |
| #define PCL__1 3 /* PC1 */ |
| #define PCL__2 4 /* PC2 */ |
| #define PCL__3 5 /* PC3 */ |
| #define PCL__4 6 /* PC4 */ |
| #define PCL__6 7 /* PC6 */ |
| #define PCL_6N 8 /* PC6 No Retention */ |
| #define PCL_6R 9 /* PC6 Retention */ |
| #define PCL__7 10 /* PC7 */ |
| #define PCL_7S 11 /* PC7 Shrink */ |
| #define PCL__8 12 /* PC8 */ |
| #define PCL__9 13 /* PC9 */ |
| #define PCL_10 14 /* PC10 */ |
| #define PCLUNL 15 /* Unlimited */ |
| |
| int pkg_cstate_limit = PCLUKN; |
| char *pkg_cstate_limit_strings[] = { "reserved", "unknown", "pc0", "pc1", "pc2", |
| "pc3", "pc4", "pc6", "pc6n", "pc6r", "pc7", "pc7s", "pc8", "pc9", "pc10", "unlimited"}; |
| |
| int nhm_pkg_cstate_limits[16] = {PCL__0, PCL__1, PCL__3, PCL__6, PCL__7, PCLRSV, PCLRSV, PCLUNL, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; |
| int snb_pkg_cstate_limits[16] = {PCL__0, PCL__2, PCL_6N, PCL_6R, PCL__7, PCL_7S, PCLRSV, PCLUNL, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; |
| int hsw_pkg_cstate_limits[16] = {PCL__0, PCL__2, PCL__3, PCL__6, PCL__7, PCL_7S, PCL__8, PCL__9, PCLUNL, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; |
| int slv_pkg_cstate_limits[16] = {PCL__0, PCL__1, PCLRSV, PCLRSV, PCL__4, PCLRSV, PCL__6, PCL__7, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCL__6, PCL__7}; |
| int amt_pkg_cstate_limits[16] = {PCLUNL, PCL__1, PCL__2, PCLRSV, PCLRSV, PCLRSV, PCL__6, PCL__7, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; |
| int phi_pkg_cstate_limits[16] = {PCL__0, PCL__2, PCL_6N, PCL_6R, PCLRSV, PCLRSV, PCLRSV, PCLUNL, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; |
| int glm_pkg_cstate_limits[16] = {PCLUNL, PCL__1, PCL__3, PCL__6, PCL__7, PCL_7S, PCL__8, PCL__9, PCL_10, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; |
| int skx_pkg_cstate_limits[16] = {PCL__0, PCL__2, PCL_6N, PCL_6R, PCLRSV, PCLRSV, PCLRSV, PCLUNL, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; |
| |
| |
| static void |
| calculate_tsc_tweak() |
| { |
| tsc_tweak = base_hz / tsc_hz; |
| } |
| |
| static void |
| dump_nhm_platform_info(void) |
| { |
| unsigned long long msr; |
| unsigned int ratio; |
| |
| get_msr(base_cpu, MSR_PLATFORM_INFO, &msr); |
| |
| fprintf(outf, "cpu%d: MSR_PLATFORM_INFO: 0x%08llx\n", base_cpu, msr); |
| |
| ratio = (msr >> 40) & 0xFF; |
| fprintf(outf, "%d * %.1f = %.1f MHz max efficiency frequency\n", |
| ratio, bclk, ratio * bclk); |
| |
| ratio = (msr >> 8) & 0xFF; |
| fprintf(outf, "%d * %.1f = %.1f MHz base frequency\n", |
| ratio, bclk, ratio * bclk); |
| |
| get_msr(base_cpu, MSR_IA32_POWER_CTL, &msr); |
| fprintf(outf, "cpu%d: MSR_IA32_POWER_CTL: 0x%08llx (C1E auto-promotion: %sabled)\n", |
| base_cpu, msr, msr & 0x2 ? "EN" : "DIS"); |
| |
| return; |
| } |
| |
| static void |
| dump_hsw_turbo_ratio_limits(void) |
| { |
| unsigned long long msr; |
| unsigned int ratio; |
| |
| get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT2, &msr); |
| |
| fprintf(outf, "cpu%d: MSR_TURBO_RATIO_LIMIT2: 0x%08llx\n", base_cpu, msr); |
| |
| ratio = (msr >> 8) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo 18 active cores\n", |
| ratio, bclk, ratio * bclk); |
| |
| ratio = (msr >> 0) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo 17 active cores\n", |
| ratio, bclk, ratio * bclk); |
| return; |
| } |
| |
| static void |
| dump_ivt_turbo_ratio_limits(void) |
| { |
| unsigned long long msr; |
| unsigned int ratio; |
| |
| get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT1, &msr); |
| |
| fprintf(outf, "cpu%d: MSR_TURBO_RATIO_LIMIT1: 0x%08llx\n", base_cpu, msr); |
| |
| ratio = (msr >> 56) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo 16 active cores\n", |
| ratio, bclk, ratio * bclk); |
| |
| ratio = (msr >> 48) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo 15 active cores\n", |
| ratio, bclk, ratio * bclk); |
| |
| ratio = (msr >> 40) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo 14 active cores\n", |
| ratio, bclk, ratio * bclk); |
| |
| ratio = (msr >> 32) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo 13 active cores\n", |
| ratio, bclk, ratio * bclk); |
| |
| ratio = (msr >> 24) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo 12 active cores\n", |
| ratio, bclk, ratio * bclk); |
| |
| ratio = (msr >> 16) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo 11 active cores\n", |
| ratio, bclk, ratio * bclk); |
| |
| ratio = (msr >> 8) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo 10 active cores\n", |
| ratio, bclk, ratio * bclk); |
| |
| ratio = (msr >> 0) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo 9 active cores\n", |
| ratio, bclk, ratio * bclk); |
| return; |
| } |
| int has_turbo_ratio_group_limits(int family, int model) |
| { |
| |
| if (!genuine_intel) |
| return 0; |
| |
| switch (model) { |
| case INTEL_FAM6_ATOM_GOLDMONT: |
| case INTEL_FAM6_SKYLAKE_X: |
| case INTEL_FAM6_ATOM_GOLDMONT_X: |
| return 1; |
| } |
| return 0; |
| } |
| |
| static void |
| dump_turbo_ratio_limits(int family, int model) |
| { |
| unsigned long long msr, core_counts; |
| unsigned int ratio, group_size; |
| |
| get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT, &msr); |
| fprintf(outf, "cpu%d: MSR_TURBO_RATIO_LIMIT: 0x%08llx\n", base_cpu, msr); |
| |
| if (has_turbo_ratio_group_limits(family, model)) { |
| get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT1, &core_counts); |
| fprintf(outf, "cpu%d: MSR_TURBO_RATIO_LIMIT1: 0x%08llx\n", base_cpu, core_counts); |
| } else { |
| core_counts = 0x0807060504030201; |
| } |
| |
| ratio = (msr >> 56) & 0xFF; |
| group_size = (core_counts >> 56) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", |
| ratio, bclk, ratio * bclk, group_size); |
| |
| ratio = (msr >> 48) & 0xFF; |
| group_size = (core_counts >> 48) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", |
| ratio, bclk, ratio * bclk, group_size); |
| |
| ratio = (msr >> 40) & 0xFF; |
| group_size = (core_counts >> 40) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", |
| ratio, bclk, ratio * bclk, group_size); |
| |
| ratio = (msr >> 32) & 0xFF; |
| group_size = (core_counts >> 32) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", |
| ratio, bclk, ratio * bclk, group_size); |
| |
| ratio = (msr >> 24) & 0xFF; |
| group_size = (core_counts >> 24) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", |
| ratio, bclk, ratio * bclk, group_size); |
| |
| ratio = (msr >> 16) & 0xFF; |
| group_size = (core_counts >> 16) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", |
| ratio, bclk, ratio * bclk, group_size); |
| |
| ratio = (msr >> 8) & 0xFF; |
| group_size = (core_counts >> 8) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", |
| ratio, bclk, ratio * bclk, group_size); |
| |
| ratio = (msr >> 0) & 0xFF; |
| group_size = (core_counts >> 0) & 0xFF; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", |
| ratio, bclk, ratio * bclk, group_size); |
| return; |
| } |
| |
| static void |
| dump_atom_turbo_ratio_limits(void) |
| { |
| unsigned long long msr; |
| unsigned int ratio; |
| |
| get_msr(base_cpu, MSR_ATOM_CORE_RATIOS, &msr); |
| fprintf(outf, "cpu%d: MSR_ATOM_CORE_RATIOS: 0x%08llx\n", base_cpu, msr & 0xFFFFFFFF); |
| |
| ratio = (msr >> 0) & 0x3F; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz minimum operating frequency\n", |
| ratio, bclk, ratio * bclk); |
| |
| ratio = (msr >> 8) & 0x3F; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz low frequency mode (LFM)\n", |
| ratio, bclk, ratio * bclk); |
| |
| ratio = (msr >> 16) & 0x3F; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz base frequency\n", |
| ratio, bclk, ratio * bclk); |
| |
| get_msr(base_cpu, MSR_ATOM_CORE_TURBO_RATIOS, &msr); |
| fprintf(outf, "cpu%d: MSR_ATOM_CORE_TURBO_RATIOS: 0x%08llx\n", base_cpu, msr & 0xFFFFFFFF); |
| |
| ratio = (msr >> 24) & 0x3F; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo 4 active cores\n", |
| ratio, bclk, ratio * bclk); |
| |
| ratio = (msr >> 16) & 0x3F; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo 3 active cores\n", |
| ratio, bclk, ratio * bclk); |
| |
| ratio = (msr >> 8) & 0x3F; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo 2 active cores\n", |
| ratio, bclk, ratio * bclk); |
| |
| ratio = (msr >> 0) & 0x3F; |
| if (ratio) |
| fprintf(outf, "%d * %.1f = %.1f MHz max turbo 1 active core\n", |
| ratio, bclk, ratio * bclk); |
| } |
| |
| static void |
| dump_knl_turbo_ratio_limits(void) |
| { |
| const unsigned int buckets_no = 7; |
| |
| unsigned long long msr; |
| int delta_cores, delta_ratio; |
| int i, b_nr; |
| unsigned int cores[buckets_no]; |
| unsigned int ratio[buckets_no]; |
| |
| get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT, &msr); |
| |
| fprintf(outf, "cpu%d: MSR_TURBO_RATIO_LIMIT: 0x%08llx\n", |
| base_cpu, msr); |
| |
| /** |
| * Turbo encoding in KNL is as follows: |
| * [0] -- Reserved |
| * [7:1] -- Base value of number of active cores of bucket 1. |
| * [15:8] -- Base value of freq ratio of bucket 1. |
| * [20:16] -- +ve delta of number of active cores of bucket 2. |
| * i.e. active cores of bucket 2 = |
| * active cores of bucket 1 + delta |
| * [23:21] -- Negative delta of freq ratio of bucket 2. |
| * i.e. freq ratio of bucket 2 = |
| * freq ratio of bucket 1 - delta |
| * [28:24]-- +ve delta of number of active cores of bucket 3. |
| * [31:29]-- -ve delta of freq ratio of bucket 3. |
| * [36:32]-- +ve delta of number of active cores of bucket 4. |
| * [39:37]-- -ve delta of freq ratio of bucket 4. |
| * [44:40]-- +ve delta of number of active cores of bucket 5. |
| * [47:45]-- -ve delta of freq ratio of bucket 5. |
| * [52:48]-- +ve delta of number of active cores of bucket 6. |
| * [55:53]-- -ve delta of freq ratio of bucket 6. |
| * [60:56]-- +ve delta of number of active cores of bucket 7. |
| * [63:61]-- -ve delta of freq ratio of bucket 7. |
| */ |
| |
| b_nr = 0; |
| cores[b_nr] = (msr & 0xFF) >> 1; |
| ratio[b_nr] = (msr >> 8) & 0xFF; |
| |
| for (i = 16; i < 64; i += 8) { |
| delta_cores = (msr >> i) & 0x1F; |
| delta_ratio = (msr >> (i + 5)) & 0x7; |
| |
| cores[b_nr + 1] = cores[b_nr] + delta_cores; |
| ratio[b_nr + 1] = ratio[b_nr] - delta_ratio; |
| b_nr++; |
| } |
| |
| for (i = buckets_no - 1; i >= 0; i--) |
| if (i > 0 ? ratio[i] != ratio[i - 1] : 1) |
| fprintf(outf, |
| "%d * %.1f = %.1f MHz max turbo %d active cores\n", |
| ratio[i], bclk, ratio[i] * bclk, cores[i]); |
| } |
| |
| static void |
| dump_nhm_cst_cfg(void) |
| { |
| unsigned long long msr; |
| |
| get_msr(base_cpu, MSR_PKG_CST_CONFIG_CONTROL, &msr); |
| |
| fprintf(outf, "cpu%d: MSR_PKG_CST_CONFIG_CONTROL: 0x%08llx", base_cpu, msr); |
| |
| fprintf(outf, " (%s%s%s%s%slocked, pkg-cstate-limit=%d (%s)", |
| (msr & SNB_C3_AUTO_UNDEMOTE) ? "UNdemote-C3, " : "", |
| (msr & SNB_C1_AUTO_UNDEMOTE) ? "UNdemote-C1, " : "", |
| (msr & NHM_C3_AUTO_DEMOTE) ? "demote-C3, " : "", |
| (msr & NHM_C1_AUTO_DEMOTE) ? "demote-C1, " : "", |
| (msr & (1 << 15)) ? "" : "UN", |
| (unsigned int)msr & 0xF, |
| pkg_cstate_limit_strings[pkg_cstate_limit]); |
| |
| #define AUTOMATIC_CSTATE_CONVERSION (1UL << 16) |
| if (has_automatic_cstate_conversion) { |
| fprintf(outf, ", automatic c-state conversion=%s", |
| (msr & AUTOMATIC_CSTATE_CONVERSION) ? "on" : "off"); |
| } |
| |
| fprintf(outf, ")\n"); |
| |
| return; |
| } |
| |
| static void |
| dump_config_tdp(void) |
| { |
| unsigned long long msr; |
| |
| get_msr(base_cpu, MSR_CONFIG_TDP_NOMINAL, &msr); |
| fprintf(outf, "cpu%d: MSR_CONFIG_TDP_NOMINAL: 0x%08llx", base_cpu, msr); |
| fprintf(outf, " (base_ratio=%d)\n", (unsigned int)msr & 0xFF); |
| |
| get_msr(base_cpu, MSR_CONFIG_TDP_LEVEL_1, &msr); |
| fprintf(outf, "cpu%d: MSR_CONFIG_TDP_LEVEL_1: 0x%08llx (", base_cpu, msr); |
| if (msr) { |
| fprintf(outf, "PKG_MIN_PWR_LVL1=%d ", (unsigned int)(msr >> 48) & 0x7FFF); |
| fprintf(outf, "PKG_MAX_PWR_LVL1=%d ", (unsigned int)(msr >> 32) & 0x7FFF); |
| fprintf(outf, "LVL1_RATIO=%d ", (unsigned int)(msr >> 16) & 0xFF); |
| fprintf(outf, "PKG_TDP_LVL1=%d", (unsigned int)(msr) & 0x7FFF); |
| } |
| fprintf(outf, ")\n"); |
| |
| get_msr(base_cpu, MSR_CONFIG_TDP_LEVEL_2, &msr); |
| fprintf(outf, "cpu%d: MSR_CONFIG_TDP_LEVEL_2: 0x%08llx (", base_cpu, msr); |
| if (msr) { |
| fprintf(outf, "PKG_MIN_PWR_LVL2=%d ", (unsigned int)(msr >> 48) & 0x7FFF); |
| fprintf(outf, "PKG_MAX_PWR_LVL2=%d ", (unsigned int)(msr >> 32) & 0x7FFF); |
| fprintf(outf, "LVL2_RATIO=%d ", (unsigned int)(msr >> 16) & 0xFF); |
| fprintf(outf, "PKG_TDP_LVL2=%d", (unsigned int)(msr) & 0x7FFF); |
| } |
| fprintf(outf, ")\n"); |
| |
| get_msr(base_cpu, MSR_CONFIG_TDP_CONTROL, &msr); |
| fprintf(outf, "cpu%d: MSR_CONFIG_TDP_CONTROL: 0x%08llx (", base_cpu, msr); |
| if ((msr) & 0x3) |
| fprintf(outf, "TDP_LEVEL=%d ", (unsigned int)(msr) & 0x3); |
| fprintf(outf, " lock=%d", (unsigned int)(msr >> 31) & 1); |
| fprintf(outf, ")\n"); |
| |
| get_msr(base_cpu, MSR_TURBO_ACTIVATION_RATIO, &msr); |
| fprintf(outf, "cpu%d: MSR_TURBO_ACTIVATION_RATIO: 0x%08llx (", base_cpu, msr); |
| fprintf(outf, "MAX_NON_TURBO_RATIO=%d", (unsigned int)(msr) & 0xFF); |
| fprintf(outf, " lock=%d", (unsigned int)(msr >> 31) & 1); |
| fprintf(outf, ")\n"); |
| } |
| |
| unsigned int irtl_time_units[] = {1, 32, 1024, 32768, 1048576, 33554432, 0, 0 }; |
| |
| void print_irtl(void) |
| { |
| unsigned long long msr; |
| |
| get_msr(base_cpu, MSR_PKGC3_IRTL, &msr); |
| fprintf(outf, "cpu%d: MSR_PKGC3_IRTL: 0x%08llx (", base_cpu, msr); |
| fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", |
| (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); |
| |
| get_msr(base_cpu, MSR_PKGC6_IRTL, &msr); |
| fprintf(outf, "cpu%d: MSR_PKGC6_IRTL: 0x%08llx (", base_cpu, msr); |
| fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", |
| (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); |
| |
| get_msr(base_cpu, MSR_PKGC7_IRTL, &msr); |
| fprintf(outf, "cpu%d: MSR_PKGC7_IRTL: 0x%08llx (", base_cpu, msr); |
| fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", |
| (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); |
| |
| if (!do_irtl_hsw) |
| return; |
| |
| get_msr(base_cpu, MSR_PKGC8_IRTL, &msr); |
| fprintf(outf, "cpu%d: MSR_PKGC8_IRTL: 0x%08llx (", base_cpu, msr); |
| fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", |
| (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); |
| |
| get_msr(base_cpu, MSR_PKGC9_IRTL, &msr); |
| fprintf(outf, "cpu%d: MSR_PKGC9_IRTL: 0x%08llx (", base_cpu, msr); |
| fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", |
| (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); |
| |
| get_msr(base_cpu, MSR_PKGC10_IRTL, &msr); |
| fprintf(outf, "cpu%d: MSR_PKGC10_IRTL: 0x%08llx (", base_cpu, msr); |
| fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", |
| (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); |
| |
| } |
| void free_fd_percpu(void) |
| { |
| int i; |
| |
| for (i = 0; i < topo.max_cpu_num + 1; ++i) { |
| if (fd_percpu[i] != 0) |
| close(fd_percpu[i]); |
| } |
| |
| free(fd_percpu); |
| } |
| |
| void free_all_buffers(void) |
| { |
| int i; |
| |
| CPU_FREE(cpu_present_set); |
| cpu_present_set = NULL; |
| cpu_present_setsize = 0; |
| |
| CPU_FREE(cpu_affinity_set); |
| cpu_affinity_set = NULL; |
| cpu_affinity_setsize = 0; |
| |
| free(thread_even); |
| free(core_even); |
| free(package_even); |
| |
| thread_even = NULL; |
| core_even = NULL; |
| package_even = NULL; |
| |
| free(thread_odd); |
| free(core_odd); |
| free(package_odd); |
| |
| thread_odd = NULL; |
| core_odd = NULL; |
| package_odd = NULL; |
| |
| free(output_buffer); |
| output_buffer = NULL; |
| outp = NULL; |
| |
| free_fd_percpu(); |
| |
| free(irq_column_2_cpu); |
| free(irqs_per_cpu); |
| |
| for (i = 0; i <= topo.max_cpu_num; ++i) { |
| if (cpus[i].put_ids) |
| CPU_FREE(cpus[i].put_ids); |
| } |
| free(cpus); |
| } |
| |
| |
| /* |
| * Parse a file containing a single int. |
| */ |
| int parse_int_file(const char *fmt, ...) |
| { |
| va_list args; |
| char path[PATH_MAX]; |
| FILE *filep; |
| int value; |
| |
| va_start(args, fmt); |
| vsnprintf(path, sizeof(path), fmt, args); |
| va_end(args); |
| filep = fopen_or_die(path, "r"); |
| if (fscanf(filep, "%d", &value) != 1) |
| err(1, "%s: failed to parse number from file", path); |
| fclose(filep); |
| return value; |
| } |
| |
| /* |
| * cpu_is_first_core_in_package(cpu) |
| * return 1 if given CPU is 1st core in package |
| */ |
| int cpu_is_first_core_in_package(int cpu) |
| { |
| return cpu == parse_int_file("/sys/devices/system/cpu/cpu%d/topology/core_siblings_list", cpu); |
| } |
| |
| int get_physical_package_id(int cpu) |
| { |
| return parse_int_file("/sys/devices/system/cpu/cpu%d/topology/physical_package_id", cpu); |
| } |
| |
| int get_core_id(int cpu) |
| { |
| return parse_int_file("/sys/devices/system/cpu/cpu%d/topology/core_id", cpu); |
| } |
| |
| void set_node_data(void) |
| { |
| int pkg, node, lnode, cpu, cpux; |
| int cpu_count; |
| |
| /* initialize logical_node_id */ |
| for (cpu = 0; cpu <= topo.max_cpu_num; ++cpu) |
| cpus[cpu].logical_node_id = -1; |
| |
| cpu_count = 0; |
| for (pkg = 0; pkg < topo.num_packages; pkg++) { |
| lnode = 0; |
| for (cpu = 0; cpu <= topo.max_cpu_num; ++cpu) { |
| if (cpus[cpu].physical_package_id != pkg) |
| continue; |
| /* find a cpu with an unset logical_node_id */ |
| if (cpus[cpu].logical_node_id != -1) |
| continue; |
| cpus[cpu].logical_node_id = lnode; |
| node = cpus[cpu].physical_node_id; |
| cpu_count++; |
| /* |
| * find all matching cpus on this pkg and set |
| * the logical_node_id |
| */ |
| for (cpux = cpu; cpux <= topo.max_cpu_num; cpux++) { |
| if ((cpus[cpux].physical_package_id == pkg) && |
| (cpus[cpux].physical_node_id == node)) { |
| cpus[cpux].logical_node_id = lnode; |
| cpu_count++; |
| } |
| } |
| lnode++; |
| if (lnode > topo.nodes_per_pkg) |
| topo.nodes_per_pkg = lnode; |
| } |
| if (cpu_count >= topo.max_cpu_num) |
| break; |
| } |
| } |
| |
| int get_physical_node_id(struct cpu_topology *thiscpu) |
| { |
| char path[80]; |
| FILE *filep; |
| int i; |
| int cpu = thiscpu->logical_cpu_id; |
| |
| for (i = 0; i <= topo.max_cpu_num; i++) { |
| sprintf(path, "/sys/devices/system/cpu/cpu%d/node%i/cpulist", |
| cpu, i); |
| filep = fopen(path, "r"); |
| if (!filep) |
| continue; |
| fclose(filep); |
| return i; |
| } |
| return -1; |
| } |
| |
| int get_thread_siblings(struct cpu_topology *thiscpu) |
| { |
| char path[80], character; |
| FILE *filep; |
| unsigned long map; |
| int so, shift, sib_core; |
| int cpu = thiscpu->logical_cpu_id; |
| int offset = topo.max_cpu_num + 1; |
| size_t size; |
| int thread_id = 0; |
| |
| thiscpu->put_ids = CPU_ALLOC((topo.max_cpu_num + 1)); |
| if (thiscpu->thread_id < 0) |
| thiscpu->thread_id = thread_id++; |
| if (!thiscpu->put_ids) |
| return -1; |
| |
| size = CPU_ALLOC_SIZE((topo.max_cpu_num + 1)); |
| CPU_ZERO_S(size, thiscpu->put_ids); |
| |
| sprintf(path, |
| "/sys/devices/system/cpu/cpu%d/topology/thread_siblings", cpu); |
| filep = fopen_or_die(path, "r"); |
| do { |
| offset -= BITMASK_SIZE; |
| fscanf(filep, "%lx%c", &map, &character); |
| for (shift = 0; shift < BITMASK_SIZE; shift++) { |
| if ((map >> shift) & 0x1) { |
| so = shift + offset; |
| sib_core = get_core_id(so); |
| if (sib_core == thiscpu->physical_core_id) { |
| CPU_SET_S(so, size, thiscpu->put_ids); |
| if ((so != cpu) && |
| (cpus[so].thread_id < 0)) |
| cpus[so].thread_id = |
| thread_id++; |
| } |
| } |
| } |
| } while (!strncmp(&character, ",", 1)); |
| fclose(filep); |
| |
| return CPU_COUNT_S(size, thiscpu->put_ids); |
| } |
| |
| /* |
| * run func(thread, core, package) in topology order |
| * skip non-present cpus |
| */ |
| |
| int for_all_cpus_2(int (func)(struct thread_data *, struct core_data *, |
| struct pkg_data *, struct thread_data *, struct core_data *, |
| struct pkg_data *), struct thread_data *thread_base, |
| struct core_data *core_base, struct pkg_data *pkg_base, |
| struct thread_data *thread_base2, struct core_data *core_base2, |
| struct pkg_data *pkg_base2) |
| { |
| int retval, pkg_no, node_no, core_no, thread_no; |
| |
| for (pkg_no = 0; pkg_no < topo.num_packages; ++pkg_no) { |
| for (node_no = 0; node_no < topo.nodes_per_pkg; ++node_no) { |
| for (core_no = 0; core_no < topo.cores_per_node; |
| ++core_no) { |
| for (thread_no = 0; thread_no < |
| topo.threads_per_core; ++thread_no) { |
| struct thread_data *t, *t2; |
| struct core_data *c, *c2; |
| struct pkg_data *p, *p2; |
| |
| t = GET_THREAD(thread_base, thread_no, |
| core_no, node_no, |
| pkg_no); |
| |
| if (cpu_is_not_present(t->cpu_id)) |
| continue; |
| |
| t2 = GET_THREAD(thread_base2, thread_no, |
| core_no, node_no, |
| pkg_no); |
| |
| c = GET_CORE(core_base, core_no, |
| node_no, pkg_no); |
| c2 = GET_CORE(core_base2, core_no, |
| node_no, |
| pkg_no); |
| |
| p = GET_PKG(pkg_base, pkg_no); |
| p2 = GET_PKG(pkg_base2, pkg_no); |
| |
| retval = func(t, c, p, t2, c2, p2); |
| if (retval) |
| return retval; |
| } |
| } |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * run func(cpu) on every cpu in /proc/stat |
| * return max_cpu number |
| */ |
| int for_all_proc_cpus(int (func)(int)) |
| { |
| FILE *fp; |
| int cpu_num; |
| int retval; |
| |
| fp = fopen_or_die(proc_stat, "r"); |
| |
| retval = fscanf(fp, "cpu %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n"); |
| if (retval != 0) |
| err(1, "%s: failed to parse format", proc_stat); |
| |
| while (1) { |
| retval = fscanf(fp, "cpu%u %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n", &cpu_num); |
| if (retval != 1) |
| break; |
| |
| retval = func(cpu_num); |
| if (retval) { |
| fclose(fp); |
| return(retval); |
| } |
| } |
| fclose(fp); |
| return 0; |
| } |
| |
| void re_initialize(void) |
| { |
| free_all_buffers(); |
| setup_all_buffers(); |
| printf("turbostat: re-initialized with num_cpus %d\n", topo.num_cpus); |
| } |
| |
| void set_max_cpu_num(void) |
| { |
| FILE *filep; |
| unsigned long dummy; |
| |
| topo.max_cpu_num = 0; |
| filep = fopen_or_die( |
| "/sys/devices/system/cpu/cpu0/topology/thread_siblings", |
| "r"); |
| while (fscanf(filep, "%lx,", &dummy) == 1) |
| topo.max_cpu_num += BITMASK_SIZE; |
| fclose(filep); |
| topo.max_cpu_num--; /* 0 based */ |
| } |
| |
| /* |
| * count_cpus() |
| * remember the last one seen, it will be the max |
| */ |
| int count_cpus(int cpu) |
| { |
| topo.num_cpus++; |
| return 0; |
| } |
| int mark_cpu_present(int cpu) |
| { |
| CPU_SET_S(cpu, cpu_present_setsize, cpu_present_set); |
| return 0; |
| } |
| |
| int init_thread_id(int cpu) |
| { |
| cpus[cpu].thread_id = -1; |
| return 0; |
| } |
| |
| /* |
| * snapshot_proc_interrupts() |
| * |
| * read and record summary of /proc/interrupts |
| * |
| * return 1 if config change requires a restart, else return 0 |
| */ |
| int snapshot_proc_interrupts(void) |
| { |
| static FILE *fp; |
| int column, retval; |
| |
| if (fp == NULL) |
| fp = fopen_or_die("/proc/interrupts", "r"); |
| else |
| rewind(fp); |
| |
| /* read 1st line of /proc/interrupts to get cpu* name for each column */ |
| for (column = 0; column < topo.num_cpus; ++column) { |
| int cpu_number; |
| |
| retval = fscanf(fp, " CPU%d", &cpu_number); |
| if (retval != 1) |
| break; |
| |
| if (cpu_number > topo.max_cpu_num) { |
| warn("/proc/interrupts: cpu%d: > %d", cpu_number, topo.max_cpu_num); |
| return 1; |
| } |
| |
| irq_column_2_cpu[column] = cpu_number; |
| irqs_per_cpu[cpu_number] = 0; |
| } |
| |
| /* read /proc/interrupt count lines and sum up irqs per cpu */ |
| while (1) { |
| int column; |
| char buf[64]; |
| |
| retval = fscanf(fp, " %s:", buf); /* flush irq# "N:" */ |
| if (retval != 1) |
| break; |
| |
| /* read the count per cpu */ |
| for (column = 0; column < topo.num_cpus; ++column) { |
| |
| int cpu_number, irq_count; |
| |
| retval = fscanf(fp, " %d", &irq_count); |
| if (retval != 1) |
| break; |
| |
| cpu_number = irq_column_2_cpu[column]; |
| irqs_per_cpu[cpu_number] += irq_count; |
| |
| } |
| |
| while (getc(fp) != '\n') |
| ; /* flush interrupt description */ |
| |
| } |
| return 0; |
| } |
| /* |
| * snapshot_gfx_rc6_ms() |
| * |
| * record snapshot of |
| * /sys/class/drm/card0/power/rc6_residency_ms |
| * |
| * return 1 if config change requires a restart, else return 0 |
| */ |
| int snapshot_gfx_rc6_ms(void) |
| { |
| FILE *fp; |
| int retval; |
| |
| fp = fopen_or_die("/sys/class/drm/card0/power/rc6_residency_ms", "r"); |
| |
| retval = fscanf(fp, "%lld", &gfx_cur_rc6_ms); |
| if (retval != 1) |
| err(1, "GFX rc6"); |
| |
| fclose(fp); |
| |
| return 0; |
| } |
| /* |
| * snapshot_gfx_mhz() |
| * |
| * record snapshot of |
| * /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz |
| * |
| * return 1 if config change requires a restart, else return 0 |
| */ |
| int snapshot_gfx_mhz(void) |
| { |
| static FILE *fp; |
| int retval; |
| |
| if (fp == NULL) |
| fp = fopen_or_die("/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz", "r"); |
| else { |
| rewind(fp); |
| fflush(fp); |
| } |
| |
| retval = fscanf(fp, "%d", &gfx_cur_mhz); |
| if (retval != 1) |
| err(1, "GFX MHz"); |
| |
| return 0; |
| } |
| |
| /* |
| * snapshot_cpu_lpi() |
| * |
| * record snapshot of |
| * /sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us |
| * |
| * return 1 if config change requires a restart, else return 0 |
| */ |
| int snapshot_cpu_lpi_us(void) |
| { |
| FILE *fp; |
| int retval; |
| |
| fp = fopen_or_die("/sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us", "r"); |
| |
| retval = fscanf(fp, "%lld", &cpuidle_cur_cpu_lpi_us); |
| if (retval != 1) |
| err(1, "CPU LPI"); |
| |
| fclose(fp); |
| |
| return 0; |
| } |
| /* |
| * snapshot_sys_lpi() |
| * |
| * record snapshot of |
| * /sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us |
| * |
| * return 1 if config change requires a restart, else return 0 |
| */ |
| int snapshot_sys_lpi_us(void) |
| { |
| FILE *fp; |
| int retval; |
| |
| fp = fopen_or_die("/sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us", "r"); |
| |
| retval = fscanf(fp, "%lld", &cpuidle_cur_sys_lpi_us); |
| if (retval != 1) |
| err(1, "SYS LPI"); |
| |
| fclose(fp); |
| |
| return 0; |
| } |
| /* |
| * snapshot /proc and /sys files |
| * |
| * return 1 if configuration restart needed, else return 0 |
| */ |
| int snapshot_proc_sysfs_files(void) |
| { |
| if (DO_BIC(BIC_IRQ)) |
| if (snapshot_proc_interrupts()) |
| return 1; |
| |
| if (DO_BIC(BIC_GFX_rc6)) |
| snapshot_gfx_rc6_ms(); |
| |
| if (DO_BIC(BIC_GFXMHz)) |
| snapshot_gfx_mhz(); |
| |
| if (DO_BIC(BIC_CPU_LPI)) |
| snapshot_cpu_lpi_us(); |
| |
| if (DO_BIC(BIC_SYS_LPI)) |
| snapshot_sys_lpi_us(); |
| |
| return 0; |
| } |
| |
| int exit_requested; |
| |
| static void signal_handler (int signal) |
| { |
| switch (signal) { |
| case SIGINT: |
| exit_requested = 1; |
| if (debug) |
| fprintf(stderr, " SIGINT\n"); |
| break; |
| case SIGUSR1: |
| if (debug > 1) |
| fprintf(stderr, "SIGUSR1\n"); |
| break; |
| } |
| /* make sure this manually-invoked interval is at least 1ms long */ |
| nanosleep(&one_msec, NULL); |
| } |
| |
| void setup_signal_handler(void) |
| { |
| struct sigaction sa; |
| |
| memset(&sa, 0, sizeof(sa)); |
| |
| sa.sa_handler = &signal_handler; |
| |
| if (sigaction(SIGINT, &sa, NULL) < 0) |
| err(1, "sigaction SIGINT"); |
| if (sigaction(SIGUSR1, &sa, NULL) < 0) |
| err(1, "sigaction SIGUSR1"); |
| } |
| |
| void do_sleep(void) |
| { |
| struct timeval select_timeout; |
| fd_set readfds; |
| int retval; |
| |
| FD_ZERO(&readfds); |
| FD_SET(0, &readfds); |
| |
| if (!isatty(fileno(stdin))) { |
| nanosleep(&interval_ts, NULL); |
| return; |
| } |
| |
| select_timeout = interval_tv; |
| retval = select(1, &readfds, NULL, NULL, &select_timeout); |
| |
| if (retval == 1) { |
| switch (getc(stdin)) { |
| case 'q': |
| exit_requested = 1; |
| break; |
| } |
| /* make sure this manually-invoked interval is at least 1ms long */ |
| nanosleep(&one_msec, NULL); |
| } |
| } |
| |
| |
| void turbostat_loop() |
| { |
| int retval; |
| int restarted = 0; |
| int done_iters = 0; |
| |
| setup_signal_handler(); |
| |
| restart: |
| restarted++; |
| |
| snapshot_proc_sysfs_files(); |
| retval = for_all_cpus(get_counters, EVEN_COUNTERS); |
| first_counter_read = 0; |
| if (retval < -1) { |
| exit(retval); |
| } else if (retval == -1) { |
| if (restarted > 1) { |
| exit(retval); |
| } |
| re_initialize(); |
| goto restart; |
| } |
| restarted = 0; |
| done_iters = 0; |
| gettimeofday(&tv_even, (struct timezone *)NULL); |
| |
| while (1) { |
| if (for_all_proc_cpus(cpu_is_not_present)) { |
| re_initialize(); |
| goto restart; |
| } |
| do_sleep(); |
| if (snapshot_proc_sysfs_files()) |
| goto restart; |
| retval = for_all_cpus(get_counters, ODD_COUNTERS); |
| if (retval < -1) { |
| exit(retval); |
| } else if (retval == -1) { |
| re_initialize(); |
| goto restart; |
| } |
| gettimeofday(&tv_odd, (struct timezone *)NULL); |
| timersub(&tv_odd, &tv_even, &tv_delta); |
| if (for_all_cpus_2(delta_cpu, ODD_COUNTERS, EVEN_COUNTERS)) { |
| re_initialize(); |
| goto restart; |
| } |
| compute_average(EVEN_COUNTERS); |
| format_all_counters(EVEN_COUNTERS); |
| flush_output_stdout(); |
| if (exit_requested) |
| break; |
| if (num_iterations && ++done_iters >= num_iterations) |
| break; |
| do_sleep(); |
| if (snapshot_proc_sysfs_files()) |
| goto restart; |
| retval = for_all_cpus(get_counters, EVEN_COUNTERS); |
| if (retval < -1) { |
| exit(retval); |
| } else if (retval == -1) { |
| re_initialize(); |
| goto restart; |
| } |
| gettimeofday(&tv_even, (struct timezone *)NULL); |
| timersub(&tv_even, &tv_odd, &tv_delta); |
| if (for_all_cpus_2(delta_cpu, EVEN_COUNTERS, ODD_COUNTERS)) { |
| re_initialize(); |
| goto restart; |
| } |
| compute_average(ODD_COUNTERS); |
| format_all_counters(ODD_COUNTERS); |
| flush_output_stdout(); |
| if (exit_requested) |
| break; |
| if (num_iterations && ++done_iters >= num_iterations) |
| break; |
| } |
| } |
| |
| void check_dev_msr() |
| { |
| struct stat sb; |
| char pathname[32]; |
| |
| sprintf(pathname, "/dev/cpu/%d/msr", base_cpu); |
| if (stat(pathname, &sb)) |
| if (system("/sbin/modprobe msr > /dev/null 2>&1")) |
| err(-5, "no /dev/cpu/0/msr, Try \"# modprobe msr\" "); |
| } |
| |
| void check_permissions() |
| { |
| struct __user_cap_header_struct cap_header_data; |
| cap_user_header_t cap_header = &cap_header_data; |
| struct __user_cap_data_struct cap_data_data; |
| cap_user_data_t cap_data = &cap_data_data; |
| extern int capget(cap_user_header_t hdrp, cap_user_data_t datap); |
| int do_exit = 0; |
| char pathname[32]; |
| |
| /* check for CAP_SYS_RAWIO */ |
| cap_header->pid = getpid(); |
| cap_header->version = _LINUX_CAPABILITY_VERSION; |
| if (capget(cap_header, cap_data) < 0) |
| err(-6, "capget(2) failed"); |
| |
| if ((cap_data->effective & (1 << CAP_SYS_RAWIO)) == 0) { |
| do_exit++; |
| warnx("capget(CAP_SYS_RAWIO) failed," |
| " try \"# setcap cap_sys_rawio=ep %s\"", progname); |
| } |
| |
| /* test file permissions */ |
| sprintf(pathname, "/dev/cpu/%d/msr", base_cpu); |
| if (euidaccess(pathname, R_OK)) { |
| do_exit++; |
| warn("/dev/cpu/0/msr open failed, try chown or chmod +r /dev/cpu/*/msr"); |
| } |
| |
| /* if all else fails, thell them to be root */ |
| if (do_exit) |
| if (getuid() != 0) |
| warnx("... or simply run as root"); |
| |
| if (do_exit) |
| exit(-6); |
| } |
| |
| /* |
| * NHM adds support for additional MSRs: |
| * |
| * MSR_SMI_COUNT 0x00000034 |
| * |
| * MSR_PLATFORM_INFO 0x000000ce |
| * MSR_PKG_CST_CONFIG_CONTROL 0x000000e2 |
| * |
| * MSR_MISC_PWR_MGMT 0x000001aa |
| * |
| * MSR_PKG_C3_RESIDENCY 0x000003f8 |
| * MSR_PKG_C6_RESIDENCY 0x000003f9 |
| * MSR_CORE_C3_RESIDENCY 0x000003fc |
| * MSR_CORE_C6_RESIDENCY 0x000003fd |
| * |
| * Side effect: |
| * sets global pkg_cstate_limit to decode MSR_PKG_CST_CONFIG_CONTROL |
| * sets has_misc_feature_control |
| */ |
| int probe_nhm_msrs(unsigned int family, unsigned int model) |
| { |
| unsigned long long msr; |
| unsigned int base_ratio; |
| int *pkg_cstate_limits; |
| |
| if (!genuine_intel) |
| return 0; |
| |
| if (family != 6) |
| return 0; |
| |
| bclk = discover_bclk(family, model); |
| |
| switch (model) { |
| case INTEL_FAM6_NEHALEM: /* Core i7 and i5 Processor - Clarksfield, Lynnfield, Jasper Forest */ |
| case INTEL_FAM6_NEHALEM_EX: /* Nehalem-EX Xeon - Beckton */ |
| pkg_cstate_limits = nhm_pkg_cstate_limits; |
| break; |
| case INTEL_FAM6_SANDYBRIDGE: /* SNB */ |
| case INTEL_FAM6_SANDYBRIDGE_X: /* SNB Xeon */ |
| case INTEL_FAM6_IVYBRIDGE: /* IVB */ |
| case INTEL_FAM6_IVYBRIDGE_X: /* IVB Xeon */ |
| pkg_cstate_limits = snb_pkg_cstate_limits; |
| has_misc_feature_control = 1; |
| break; |
| case INTEL_FAM6_HASWELL_CORE: /* HSW */ |
| case INTEL_FAM6_HASWELL_X: /* HSX */ |
| case INTEL_FAM6_HASWELL_GT3E: /* HSW */ |
| case INTEL_FAM6_BROADWELL_CORE: /* BDW */ |
| case INTEL_FAM6_BROADWELL_GT3E: /* BDW */ |
| case INTEL_FAM6_BROADWELL_X: /* BDX */ |
| case INTEL_FAM6_SKYLAKE_MOBILE: /* SKL */ |
| case INTEL_FAM6_CANNONLAKE_MOBILE: /* CNL */ |
| pkg_cstate_limits = hsw_pkg_cstate_limits; |
| has_misc_feature_control = 1; |
| break; |
| case INTEL_FAM6_SKYLAKE_X: /* SKX */ |
| pkg_cstate_limits = skx_pkg_cstate_limits; |
| has_misc_feature_control = 1; |
| break; |
| case INTEL_FAM6_ATOM_SILVERMONT: /* BYT */ |
| no_MSR_MISC_PWR_MGMT = 1; |
| case INTEL_FAM6_ATOM_SILVERMONT_X: /* AVN */ |
| pkg_cstate_limits = slv_pkg_cstate_limits; |
| break; |
| case INTEL_FAM6_ATOM_AIRMONT: /* AMT */ |
| pkg_cstate_limits = amt_pkg_cstate_limits; |
| no_MSR_MISC_PWR_MGMT = 1; |
| break; |
| case INTEL_FAM6_XEON_PHI_KNL: /* PHI */ |
| pkg_cstate_limits = phi_pkg_cstate_limits; |
| break; |
| case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ |
| case INTEL_FAM6_ATOM_GOLDMONT_PLUS: |
| case INTEL_FAM6_ATOM_GOLDMONT_X: /* DNV */ |
| pkg_cstate_limits = glm_pkg_cstate_limits; |
| break; |
| default: |
| return 0; |
| } |
| get_msr(base_cpu, MSR_PKG_CST_CONFIG_CONTROL, &msr); |
| pkg_cstate_limit = pkg_cstate_limits[msr & 0xF]; |
| |
| get_msr(base_cpu, MSR_PLATFORM_INFO, &msr); |
| base_ratio = (msr >> 8) & 0xFF; |
| |
| base_hz = base_ratio * bclk * 1000000; |
| has_base_hz = 1; |
| return 1; |
| } |
| /* |
| * SLV client has support for unique MSRs: |
| * |
| * MSR_CC6_DEMOTION_POLICY_CONFIG |
| * MSR_MC6_DEMOTION_POLICY_CONFIG |
| */ |
| |
| int has_slv_msrs(unsigned int family, unsigned int model) |
| { |
| if (!genuine_intel) |
| return 0; |
| |
| switch (model) { |
| case INTEL_FAM6_ATOM_SILVERMONT: |
| case INTEL_FAM6_ATOM_SILVERMONT_MID: |
| case INTEL_FAM6_ATOM_AIRMONT_MID: |
| return 1; |
| } |
| return 0; |
| } |
| int is_dnv(unsigned int family, unsigned int model) |
| { |
| |
| if (!genuine_intel) |
| return 0; |
| |
| switch (model) { |
| case INTEL_FAM6_ATOM_GOLDMONT_X: |
| return 1; |
| } |
| return 0; |
| } |
| int is_bdx(unsigned int family, unsigned int model) |
| { |
| |
| if (!genuine_intel) |
| return 0; |
| |
| switch (model) { |
| case INTEL_FAM6_BROADWELL_X: |
| return 1; |
| } |
| return 0; |
| } |
| int is_skx(unsigned int family, unsigned int model) |
| { |
| |
| if (!genuine_intel) |
| return 0; |
| |
| switch (model) { |
| case INTEL_FAM6_SKYLAKE_X: |
| return 1; |
| } |
| return 0; |
| } |
| |
| int has_turbo_ratio_limit(unsigned int family, unsigned int model) |
| { |
| if (has_slv_msrs(family, model)) |
| return 0; |
| |
| switch (model) { |
| /* Nehalem compatible, but do not include turbo-ratio limit support */ |
| case INTEL_FAM6_NEHALEM_EX: /* Nehalem-EX Xeon - Beckton */ |
| case INTEL_FAM6_XEON_PHI_KNL: /* PHI - Knights Landing (different MSR definition) */ |
| return 0; |
| default: |
| return 1; |
| } |
| } |
| int has_atom_turbo_ratio_limit(unsigned int family, unsigned int model) |
| { |
| if (has_slv_msrs(family, model)) |
| return 1; |
| |
| return 0; |
| } |
| int has_ivt_turbo_ratio_limit(unsigned int family, unsigned int model) |
| { |
| if (!genuine_intel) |
| return 0; |
| |
| if (family != 6) |
| return 0; |
| |
| switch (model) { |
| case INTEL_FAM6_IVYBRIDGE_X: /* IVB Xeon */ |
| case INTEL_FAM6_HASWELL_X: /* HSW Xeon */ |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| int has_hsw_turbo_ratio_limit(unsigned int family, unsigned int model) |
| { |
| if (!genuine_intel) |
| return 0; |
| |
| if (family != 6) |
| return 0; |
| |
| switch (model) { |
| case INTEL_FAM6_HASWELL_X: /* HSW Xeon */ |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| int has_knl_turbo_ratio_limit(unsigned int family, unsigned int model) |
| { |
| if (!genuine_intel) |
| return 0; |
| |
| if (family != 6) |
| return 0; |
| |
| switch (model) { |
| case INTEL_FAM6_XEON_PHI_KNL: /* Knights Landing */ |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| int has_glm_turbo_ratio_limit(unsigned int family, unsigned int model) |
| { |
| if (!genuine_intel) |
| return 0; |
| |
| if (family != 6) |
| return 0; |
| |
| switch (model) { |
| case INTEL_FAM6_ATOM_GOLDMONT: |
| case INTEL_FAM6_SKYLAKE_X: |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| int has_config_tdp(unsigned int family, unsigned int model) |
| { |
| if (!genuine_intel) |
| return 0; |
| |
| if (family != 6) |
| return 0; |
| |
| switch (model) { |
| case INTEL_FAM6_IVYBRIDGE: /* IVB */ |
| case INTEL_FAM6_HASWELL_CORE: /* HSW */ |
| case INTEL_FAM6_HASWELL_X: /* HSX */ |
| case INTEL_FAM6_HASWELL_GT3E: /* HSW */ |
| case INTEL_FAM6_BROADWELL_CORE: /* BDW */ |
| case INTEL_FAM6_BROADWELL_GT3E: /* BDW */ |
| case INTEL_FAM6_BROADWELL_X: /* BDX */ |
| case INTEL_FAM6_SKYLAKE_MOBILE: /* SKL */ |
| case INTEL_FAM6_CANNONLAKE_MOBILE: /* CNL */ |
| case INTEL_FAM6_SKYLAKE_X: /* SKX */ |
| |
| case INTEL_FAM6_XEON_PHI_KNL: /* Knights Landing */ |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| static void |
| dump_cstate_pstate_config_info(unsigned int family, unsigned int model) |
| { |
| if (!do_nhm_platform_info) |
| return; |
| |
| dump_nhm_platform_info(); |
| |
| if (has_hsw_turbo_ratio_limit(family, model)) |
| dump_hsw_turbo_ratio_limits(); |
| |
| if (has_ivt_turbo_ratio_limit(family, model)) |
| dump_ivt_turbo_ratio_limits(); |
| |
| if (has_turbo_ratio_limit(family, model)) |
| dump_turbo_ratio_limits(family, model); |
| |
| if (has_atom_turbo_ratio_limit(family, model)) |
| dump_atom_turbo_ratio_limits(); |
| |
| if (has_knl_turbo_ratio_limit(family, model)) |
| dump_knl_turbo_ratio_limits(); |
| |
| if (has_config_tdp(family, model)) |
| dump_config_tdp(); |
| |
| dump_nhm_cst_cfg(); |
| } |
| |
| static void |
| dump_sysfs_cstate_config(void) |
| { |
| char path[64]; |
| char name_buf[16]; |
| char desc[64]; |
| FILE *input; |
| int state; |
| char *sp; |
| |
| if (!DO_BIC(BIC_sysfs)) |
| return; |
| |
| for (state = 0; state < 10; ++state) { |
| |
| sprintf(path, "/sys/devices/system/cpu/cpu%d/cpuidle/state%d/name", |
| base_cpu, state); |
| input = fopen(path, "r"); |
| if (input == NULL) |
| continue; |
| fgets(name_buf, sizeof(name_buf), input); |
| |
| /* truncate "C1-HSW\n" to "C1", or truncate "C1\n" to "C1" */ |
| sp = strchr(name_buf, '-'); |
| if (!sp) |
| sp = strchrnul(name_buf, '\n'); |
| *sp = '\0'; |
| |
| fclose(input); |
| |
| sprintf(path, "/sys/devices/system/cpu/cpu%d/cpuidle/state%d/desc", |
| base_cpu, state); |
| input = fopen(path, "r"); |
| if (input == NULL) |
| continue; |
| fgets(desc, sizeof(desc), input); |
| |
| fprintf(outf, "cpu%d: %s: %s", base_cpu, name_buf, desc); |
| fclose(input); |
| } |
| } |
| static void |
| dump_sysfs_pstate_config(void) |
| { |
| char path[64]; |
| char driver_buf[64]; |
| char governor_buf[64]; |
| FILE *input; |
| int turbo; |
| |
| sprintf(path, "/sys/devices/system/cpu/cpu%d/cpufreq/scaling_driver", |
| base_cpu); |
| input = fopen(path, "r"); |
| if (input == NULL) { |
| fprintf(stderr, "NSFOD %s\n", path); |
| return; |
| } |
| fgets(driver_buf, sizeof(driver_buf), input); |
| fclose(input); |
| |
| sprintf(path, "/sys/devices/system/cpu/cpu%d/cpufreq/scaling_governor", |
| base_cpu); |
| input = fopen(path, "r"); |
| if (input == NULL) { |
| fprintf(stderr, "NSFOD %s\n", path); |
| return; |
| } |
| fgets(governor_buf, sizeof(governor_buf), input); |
| fclose(input); |
| |
| fprintf(outf, "cpu%d: cpufreq driver: %s", base_cpu, driver_buf); |
| fprintf(outf, "cpu%d: cpufreq governor: %s", base_cpu, governor_buf); |
| |
| sprintf(path, "/sys/devices/system/cpu/cpufreq/boost"); |
| input = fopen(path, "r"); |
| if (input != NULL) { |
| fscanf(input, "%d", &turbo); |
| fprintf(outf, "cpufreq boost: %d\n", turbo); |
| fclose(input); |
| } |
| |
| sprintf(path, "/sys/devices/system/cpu/intel_pstate/no_turbo"); |
| input = fopen(path, "r"); |
| if (input != NULL) { |
| fscanf(input, "%d", &turbo); |
| fprintf(outf, "cpufreq intel_pstate no_turbo: %d\n", turbo); |
| fclose(input); |
| } |
| } |
| |
| |
| /* |
| * print_epb() |
| * Decode the ENERGY_PERF_BIAS MSR |
| */ |
| int print_epb(struct thread_data *t, struct core_data *c, struct pkg_data *p) |
| { |
| unsigned long long msr; |
| char *epb_string; |
| int cpu; |
| |
| if (!has_epb) |
| return 0; |
| |
| cpu = t->cpu_id; |
| |
| /* EPB is per-package */ |
| if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE) || !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) |
| return 0; |
| |
| if (cpu_migrate(cpu)) { |
| fprintf(outf, "Could not migrate to CPU %d\n", cpu); |
| return -1; |
| } |
| |
| if (get_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS, &msr)) |
| return 0; |
| |
| switch (msr & 0xF) { |
| case ENERGY_PERF_BIAS_PERFORMANCE: |
| epb_string = "performance"; |
| break; |
| case ENERGY_PERF_BIAS_NORMAL: |
| epb_string = "balanced"; |
| break; |
| case ENERGY_PERF_BIAS_POWERSAVE: |
| epb_string = "powersave"; |
| break; |
| default: |
| epb_string = "custom"; |
| break; |
| } |
| fprintf(outf, "cpu%d: MSR_IA32_ENERGY_PERF_BIAS: 0x%08llx (%s)\n", cpu, msr, epb_string); |
| |
| return 0; |
| } |
| /* |
| * print_hwp() |
| * Decode the MSR_HWP_CAPABILITIES |
| */ |
| int print_hwp(struct thread_data *t, struct core_data *c, struct pkg_data *p) |
| { |
| unsigned long long msr; |
| int cpu; |
| |
| if (!has_hwp) |
| return 0; |
| |
| cpu = t->cpu_id; |
| |
| /* MSR_HWP_CAPABILITIES is per-package */ |
| if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE) || !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) |
| return 0; |
| |
| if (cpu_migrate(cpu)) { |
| fprintf(outf, "Could not migrate to CPU %d\n", cpu); |
| return -1; |
| } |
| |
| if (get_msr(cpu, MSR_PM_ENABLE, &msr)) |
| return 0; |
| |
| fprintf(outf, "cpu%d: MSR_PM_ENABLE: 0x%08llx (%sHWP)\n", |
| cpu, msr, (msr & (1 << 0)) ? "" : "No-"); |
| |
| /* MSR_PM_ENABLE[1] == 1 if HWP is enabled and MSRs visible */ |
| if ((msr & (1 << 0)) == 0) |
| return 0; |
| |
| if (get_msr(cpu, MSR_HWP_CAPABILITIES, &msr)) |
| return 0; |
| |
| fprintf(outf, "cpu%d: MSR_HWP_CAPABILITIES: 0x%08llx " |
| "(high %d guar %d eff %d low %d)\n", |
| cpu, msr, |
| (unsigned int)HWP_HIGHEST_PERF(msr), |
| (unsigned int)HWP_GUARANTEED_PERF(msr), |
| (unsigned int)HWP_MOSTEFFICIENT_PERF(msr), |
| (unsigned int)HWP_LOWEST_PERF(msr)); |
| |
| if (get_msr(cpu, MSR_HWP_REQUEST, &msr)) |
| return 0; |
| |
| fprintf(outf, "cpu%d: MSR_HWP_REQUEST: 0x%08llx " |
| "(min %d max %d des %d epp 0x%x window 0x%x pkg 0x%x)\n", |
| cpu, msr, |
| (unsigned int)(((msr) >> 0) & 0xff), |
| (unsigned int)(((msr) >> 8) & 0xff), |
| (unsigned int)(((msr) >> 16) & 0xff), |
| (unsigned int)(((msr) >> 24) & 0xff), |
| (unsigned int)(((msr) >> 32) & 0xff3), |
| (unsigned int)(((msr) >> 42) & 0x1)); |
| |
| if (has_hwp_pkg) { |
| if (get_msr(cpu, MSR_HWP_REQUEST_PKG, &msr)) |
| return 0; |
| |
| fprintf(outf, "cpu%d: MSR_HWP_REQUEST_PKG: 0x%08llx " |
| "(min %d max %d des %d epp 0x%x window 0x%x)\n", |
| cpu, msr, |
| (unsigned int)(((msr) >> 0) & 0xff), |
| (unsigned int)(((msr) >> 8) & 0xff), |
| (unsigned int)(((msr) >> 16) & 0xff), |
| (unsigned int)(((msr) >> 24) & 0xff), |
| (unsigned int)(((msr) >> 32) & 0xff3)); |
| } |
| if (has_hwp_notify) { |
| if (get_msr(cpu, MSR_HWP_INTERRUPT, &msr)) |
| return 0; |
| |
| fprintf(outf, "cpu%d: MSR_HWP_INTERRUPT: 0x%08llx " |
| "(%s_Guaranteed_Perf_Change, %s_Excursion_Min)\n", |
| cpu, msr, |
| ((msr) & 0x1) ? "EN" : "Dis", |
| ((msr) & 0x2) ? "EN" : "Dis"); |
| } |
| if (get_msr(cpu, MSR_HWP_STATUS, &msr)) |
| return 0; |
| |
| fprintf(outf, "cpu%d: MSR_HWP_STATUS: 0x%08llx " |
| "(%sGuaranteed_Perf_Change, %sExcursion_Min)\n", |
| cpu, msr, |
| ((msr) & 0x1) ? "" : "No-", |
| ((msr) & 0x2) ? "" : "No-"); |
| |
| return 0; |
| } |
| |
| /* |
| * print_perf_limit() |
| */ |
| int print_perf_limit(struct thread_data *t, struct core_data *c, struct pkg_data *p) |
| { |
| unsigned long long msr; |
| int cpu; |
| |
| cpu = t->cpu_id; |
| |
| /* per-package */ |
| if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE) || !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) |
| return 0; |
| |
| if (cpu_migrate(cpu)) { |
| fprintf(outf, "Could not migrate to CPU %d\n", cpu); |
| return -1; |
| } |
| |
| if (do_core_perf_limit_reasons) { |
| get_msr(cpu, MSR_CORE_PERF_LIMIT_REASONS, &msr); |
| fprintf(outf, "cpu%d: MSR_CORE_PERF_LIMIT_REASONS, 0x%08llx", cpu, msr); |
| fprintf(outf, " (Active: %s%s%s%s%s%s%s%s%s%s%s%s%s%s)", |
| (msr & 1 << 15) ? "bit15, " : "", |
| (msr & 1 << 14) ? "bit14, " : "", |
| (msr & 1 << 13) ? "Transitions, " : "", |
| (msr & 1 << 12) ? "MultiCoreTurbo, " : "", |
| (msr & 1 << 11) ? "PkgPwrL2, " : "", |
| (msr & 1 << 10) ? "PkgPwrL1, " : "", |
| (msr & 1 << 9) ? "CorePwr, " : "", |
| (msr & 1 << 8) ? "Amps, " : "", |
| (msr & 1 << 6) ? "VR-Therm, " : "", |
| (msr & 1 << 5) ? "Auto-HWP, " : "", |
| (msr & 1 << 4) ? "Graphics, " : "", |
| (msr & 1 << 2) ? "bit2, " : "", |
| (msr & 1 << 1) ? "ThermStatus, " : "", |
| (msr & 1 << 0) ? "PROCHOT, " : ""); |
| fprintf(outf, " (Logged: %s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n", |
| (msr & 1 << 31) ? "bit31, " : "", |
| (msr & 1 << 30) ? "bit30, " : "", |
| (msr & 1 << 29) ? "Transitions, " : "", |
| (msr & 1 << 28) ? "MultiCoreTurbo, " : "", |
| (msr & 1 << 27) ? "PkgPwrL2, " : "", |
| (msr & 1 << 26) ? "PkgPwrL1, " : "", |
| (msr & 1 << 25) ? "CorePwr, " : "", |
| (msr & 1 << 24) ? "Amps, " : "", |
| (msr & 1 << 22) ? "VR-Therm, " : "", |
| (msr & 1 << 21) ? "Auto-HWP, " : "", |
| (msr & 1 << 20) ? "Graphics, " : "", |
| (msr & 1 << 18) ? "bit18, " : "", |
| (msr & 1 << 17) ? "ThermStatus, " : "", |
| (msr & 1 << 16) ? "PROCHOT, " : ""); |
| |
| } |
| if (do_gfx_perf_limit_reasons) { |
| get_msr(cpu, MSR_GFX_PERF_LIMIT_REASONS, &msr); |
| fprintf(outf, "cpu%d: MSR_GFX_PERF_LIMIT_REASONS, 0x%08llx", cpu, msr); |
| fprintf(outf, " (Active: %s%s%s%s%s%s%s%s)", |
| (msr & 1 << 0) ? "PROCHOT, " : "", |
| (msr & 1 << 1) ? "ThermStatus, " : "", |
| (msr & 1 << 4) ? "Graphics, " : "", |
| (msr & 1 << 6) ? "VR-Therm, " : "", |
| (msr & 1 << 8) ? "Amps, " : "", |
| (msr & 1 << 9) ? "GFXPwr, " : "", |
| (msr & 1 << 10) ? "PkgPwrL1, " : "", |
| (msr & 1 << 11) ? "PkgPwrL2, " : ""); |
| fprintf(outf, " (Logged: %s%s%s%s%s%s%s%s)\n", |
| (msr & 1 << 16) ? "PROCHOT, " : "", |
| (msr & 1 << 17) ? "ThermStatus, " : "", |
| (msr & 1 << 20) ? "Graphics, " : "", |
| (msr & 1 << 22) ? "VR-Therm, " : "", |
| (msr & 1 << 24) ? "Amps, " : "", |
| (msr & 1 << 25) ? "GFXPwr, " : "", |
| (msr & 1 << 26) ? "PkgPwrL1, " : "", |
| (msr & 1 << 27) ? "PkgPwrL2, " : ""); |
| } |
| if (do_ring_perf_limit_reasons) { |
| get_msr(cpu, MSR_RING_PERF_LIMIT_REASONS, &msr); |
| fprintf(outf, "cpu%d: MSR_RING_PERF_LIMIT_REASONS, 0x%08llx", cpu, msr); |
| fprintf(outf, " (Active: %s%s%s%s%s%s)", |
| (msr & 1 << 0) ? "PROCHOT, " : "", |
| (msr & 1 << 1) ? "ThermStatus, " : "", |
| (msr & 1 << 6) ? "VR-Therm, " : "", |
| (msr & 1 << 8) ? "Amps, " : "", |
| (msr & 1 << 10) ? "PkgPwrL1, " : "", |
| (msr & 1 << 11) ? "PkgPwrL2, " : ""); |
| fprintf(outf, " (Logged: %s%s%s%s%s%s)\n", |
| (msr & 1 << 16) ? "PROCHOT, " : "", |
| (msr & 1 << 17) ? "ThermStatus, " : "", |
| (msr & 1 << 22) ? "VR-Therm, " : "", |
| (msr & 1 << 24) ? "Amps, " : "", |
| (msr & 1 << 26) ? "PkgPwrL1, " : "", |
| (msr & 1 << 27) ? "PkgPwrL2, " : ""); |
| } |
| return 0; |
| } |
| |
| #define RAPL_POWER_GRANULARITY 0x7FFF /* 15 bit power granularity */ |
| #define RAPL_TIME_GRANULARITY 0x3F /* 6 bit time granularity */ |
| |
| double get_tdp(unsigned int model) |
| { |
| unsigned long long msr; |
| |
| if (do_rapl & RAPL_PKG_POWER_INFO) |
| if (!get_msr(base_cpu, MSR_PKG_POWER_INFO, &msr)) |
| return ((msr >> 0) & RAPL_POWER_GRANULARITY) * rapl_power_units; |
| |
| switch (model) { |
| case INTEL_FAM6_ATOM_SILVERMONT: |
| case INTEL_FAM6_ATOM_SILVERMONT_X: |
| return 30.0; |
| default: |
| return 135.0; |
| } |
| } |
| |
| /* |
| * rapl_dram_energy_units_probe() |
| * Energy units are either hard-coded, or come from RAPL Energy Unit MSR. |
| */ |
| static double |
| rapl_dram_energy_units_probe(int model, double rapl_energy_units) |
| { |
| /* only called for genuine_intel, family 6 */ |
| |
| switch (model) { |
| case INTEL_FAM6_HASWELL_X: /* HSX */ |
| case INTEL_FAM6_BROADWELL_X: /* BDX */ |
| case INTEL_FAM6_XEON_PHI_KNL: /* KNL */ |
| return (rapl_dram_energy_units = 15.3 / 1000000); |
| default: |
| return (rapl_energy_units); |
| } |
| } |
| |
| |
| /* |
| * rapl_probe() |
| * |
| * sets do_rapl, rapl_power_units, rapl_energy_units, rapl_time_units |
| */ |
| void rapl_probe(unsigned int family, unsigned int model) |
| { |
| unsigned long long msr; |
| unsigned int time_unit; |
| double tdp; |
| |
| if (!genuine_intel) |
| return; |
| |
| if (family != 6) |
| return; |
| |
| switch (model) { |
| case INTEL_FAM6_SANDYBRIDGE: |
| case INTEL_FAM6_IVYBRIDGE: |
| case INTEL_FAM6_HASWELL_CORE: /* HSW */ |
| case INTEL_FAM6_HASWELL_GT3E: /* HSW */ |
| case INTEL_FAM6_BROADWELL_CORE: /* BDW */ |
| case INTEL_FAM6_BROADWELL_GT3E: /* BDW */ |
| do_rapl = RAPL_PKG | RAPL_CORES | RAPL_CORE_POLICY | RAPL_GFX | RAPL_PKG_POWER_INFO; |
| if (rapl_joules) { |
| BIC_PRESENT(BIC_Pkg_J); |
| BIC_PRESENT(BIC_Cor_J); |
| BIC_PRESENT(BIC_GFX_J); |
| } else { |
| BIC_PRESENT(BIC_PkgWatt); |
| BIC_PRESENT(BIC_CorWatt); |
| BIC_PRESENT(BIC_GFXWatt); |
| } |
| break; |
| case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ |
| case INTEL_FAM6_ATOM_GOLDMONT_PLUS: |
| do_rapl = RAPL_PKG | RAPL_PKG_POWER_INFO; |
| if (rapl_joules) |
| BIC_PRESENT(BIC_Pkg_J); |
| else |
| BIC_PRESENT(BIC_PkgWatt); |
| break; |
| case INTEL_FAM6_SKYLAKE_MOBILE: /* SKL */ |
| case INTEL_FAM6_CANNONLAKE_MOBILE: /* CNL */ |
| do_rapl = RAPL_PKG | RAPL_CORES | RAPL_CORE_POLICY | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS | RAPL_GFX | RAPL_PKG_POWER_INFO; |
| BIC_PRESENT(BIC_PKG__); |
| BIC_PRESENT(BIC_RAM__); |
| if (rapl_joules) { |
| BIC_PRESENT(BIC_Pkg_J); |
| BIC_PRESENT(BIC_Cor_J); |
| BIC_PRESENT(BIC_RAM_J); |
| BIC_PRESENT(BIC_GFX_J); |
| } else { |
| BIC_PRESENT(BIC_PkgWatt); |
| BIC_PRESENT(BIC_CorWatt); |
| BIC_PRESENT(BIC_RAMWatt); |
| BIC_PRESENT(BIC_GFXWatt); |
| } |
| break; |
| case INTEL_FAM6_HASWELL_X: /* HSX */ |
| case INTEL_FAM6_BROADWELL_X: /* BDX */ |
| case INTEL_FAM6_SKYLAKE_X: /* SKX */ |
| case INTEL_FAM6_XEON_PHI_KNL: /* KNL */ |
| do_rapl = RAPL_PKG | RAPL_DRAM | RAPL_DRAM_POWER_INFO | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS | RAPL_PKG_POWER_INFO; |
| BIC_PRESENT(BIC_PKG__); |
| BIC_PRESENT(BIC_RAM__); |
| if (rapl_joules) { |
| BIC_PRESENT(BIC_Pkg_J); |
| BIC_PRESENT(BIC_RAM_J); |
| } else { |
| BIC_PRESENT(BIC_PkgWatt); |
| BIC_PRESENT(BIC_RAMWatt); |
| } |
| break; |
| case INTEL_FAM6_SANDYBRIDGE_X: |
| case INTEL_FAM6_IVYBRIDGE_X: |
| do_rapl = RAPL_PKG | RAPL_CORES | RAPL_CORE_POLICY | RAPL_DRAM | RAPL_DRAM_POWER_INFO | RAPL_PKG_PERF_STATUS | RAPL_DRAM_PERF_STATUS | RAPL_PKG_POWER_INFO; |
| BIC_PRESENT(BIC_PKG__); |
| BIC_PRESENT(BIC_RAM__); |
| if (rapl_joules) { |
| BIC_PRESENT(BIC_Pkg_J); |
| BIC_PRESENT(BIC_Cor_J); |
| BIC_PRESENT(BIC_RAM_J); |
| } else { |
| BIC_PRESENT(BIC_PkgWatt); |
| BIC_PRESENT(BIC_CorWatt); |
| BIC_PRESENT(BIC_RAMWatt); |
| } |
| break; |
| case INTEL_FAM6_ATOM_SILVERMONT: /* BYT */ |
| case INTEL_FAM6_ATOM_SILVERMONT_X: /* AVN */ |
| do_rapl = RAPL_PKG | RAPL_CORES; |
| if (rapl_joules) { |
| BIC_PRESENT(BIC_Pkg_J); |
| BIC_PRESENT(BIC_Cor_J); |
| } else { |
| BIC_PRESENT(BIC_PkgWatt); |
| BIC_PRESENT(BIC_CorWatt); |
| } |
| break; |
| case INTEL_FAM6_ATOM_GOLDMONT_X: /* DNV */ |
| do_rapl = RAPL_PKG | RAPL_DRAM | RAPL_DRAM_POWER_INFO | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS | RAPL_PKG_POWER_INFO | RAPL_CORES_ENERGY_STATUS; |
| BIC_PRESENT(BIC_PKG__); |
| BIC_PRESENT(BIC_RAM__); |
| if (rapl_joules) { |
| BIC_PRESENT(BIC_Pkg_J); |
| BIC_PRESENT(BIC_Cor_J); |
| BIC_PRESENT(BIC_RAM_J); |
| } else { |
| BIC_PRESENT(BIC_PkgWatt); |
| BIC_PRESENT(BIC_CorWatt); |
| BIC_PRESENT(BIC_RAMWatt); |
| } |
| break; |
| default: |
| return; |
| } |
| |
| /* units on package 0, verify later other packages match */ |
| if (get_msr(base_cpu, MSR_RAPL_POWER_UNIT, &msr)) |
| return; |
| |
| rapl_power_units = 1.0 / (1 << (msr & 0xF)); |
| if (model == INTEL_FAM6_ATOM_SILVERMONT) |
| rapl_energy_units = 1.0 * (1 << (msr >> 8 & 0x1F)) / 1000000; |
| else |
| rapl_energy_units = 1.0 / (1 << (msr >> 8 & 0x1F)); |
| |
| rapl_dram_energy_units = rapl_dram_energy_units_probe(model, rapl_energy_units); |
| |
| time_unit = msr >> 16 & 0xF; |
| if (time_unit == 0) |
| time_unit = 0xA; |
| |
| rapl_time_units = 1.0 / (1 << (time_unit)); |
| |
| tdp = get_tdp(model); |
| |
| rapl_joule_counter_range = 0xFFFFFFFF * rapl_energy_units / tdp; |
| if (!quiet) |
| fprintf(outf, "RAPL: %.0f sec. Joule Counter Range, at %.0f Watts\n", rapl_joule_counter_range, tdp); |
| |
| return; |
| } |
| |
| void perf_limit_reasons_probe(unsigned int family, unsigned int model) |
| { |
| if (!genuine_intel) |
| return; |
| |
| if (family != 6) |
| return; |
| |
| switch (model) { |
| case INTEL_FAM6_HASWELL_CORE: /* HSW */ |
| case INTEL_FAM6_HASWELL_GT3E: /* HSW */ |
| do_gfx_perf_limit_reasons = 1; |
| case INTEL_FAM6_HASWELL_X: /* HSX */ |
| do_core_perf_limit_reasons = 1; |
| do_ring_perf_limit_reasons = 1; |
| default: |
| return; |
| } |
| } |
| |
| void automatic_cstate_conversion_probe(unsigned int family, unsigned int model) |
| { |
| if (is_skx(family, model) || is_bdx(family, model)) |
| has_automatic_cstate_conversion = 1; |
| } |
| |
| int print_thermal(struct thread_data *t, struct core_data *c, struct pkg_data *p) |
| { |
| unsigned long long msr; |
| unsigned int dts, dts2; |
| int cpu; |
| |
| if (!(do_dts || do_ptm)) |
| return 0; |
| |
| cpu = t->cpu_id; |
| |
| /* DTS is per-core, no need to print for each thread */ |
| if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) |
| return 0; |
| |
| if (cpu_migrate(cpu)) { |
| fprintf(outf, "Could not migrate to CPU %d\n", cpu); |
| return -1; |
| } |
| |
| if (do_ptm && (t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) { |
| if (get_msr(cpu, MSR_IA32_PACKAGE_THERM_STATUS, &msr)) |
| return 0; |
| |
| dts = (msr >> 16) & 0x7F; |
| fprintf(outf, "cpu%d: MSR_IA32_PACKAGE_THERM_STATUS: 0x%08llx (%d C)\n", |
| cpu, msr, tcc_activation_temp - dts); |
| |
| if (get_msr(cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT, &msr)) |
| return 0; |
| |
| dts = (msr >> 16) & 0x7F; |
| dts2 = (msr >> 8) & 0x7F; |
| fprintf(outf, "cpu%d: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x%08llx (%d C, %d C)\n", |
| cpu, msr, tcc_activation_temp - dts, tcc_activation_temp - dts2); |
| } |
| |
| |
| if (do_dts && debug) { |
| unsigned int resolution; |
| |
| if (get_msr(cpu, MSR_IA32_THERM_STATUS, &msr)) |
| return 0; |
| |
| dts = (msr >> 16) & 0x7F; |
| resolution = (msr >> 27) & 0xF; |
| fprintf(outf, "cpu%d: MSR_IA32_THERM_STATUS: 0x%08llx (%d C +/- %d)\n", |
| cpu, msr, tcc_activation_temp - dts, resolution); |
| |
| if (get_msr(cpu, MSR_IA32_THERM_INTERRUPT, &msr)) |
| return 0; |
| |
| dts = (msr >> 16) & 0x7F; |
| dts2 = (msr >> 8) & 0x7F; |
| fprintf(outf, "cpu%d: MSR_IA32_THERM_INTERRUPT: 0x%08llx (%d C, %d C)\n", |
| cpu, msr, tcc_activation_temp - dts, tcc_activation_temp - dts2); |
| } |
| |
| return 0; |
| } |
| |
| void print_power_limit_msr(int cpu, unsigned long long msr, char *label) |
| { |
| fprintf(outf, "cpu%d: %s: %sabled (%f Watts, %f sec, clamp %sabled)\n", |
| cpu, label, |
| ((msr >> 15) & 1) ? "EN" : "DIS", |
| ((msr >> 0) & 0x7FFF) * rapl_power_units, |
| (1.0 + (((msr >> 22) & 0x3)/4.0)) * (1 << ((msr >> 17) & 0x1F)) * rapl_time_units, |
| (((msr >> 16) & 1) ? "EN" : "DIS")); |
| |
| return; |
| } |
| |
| int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p) |
| { |
| unsigned long long msr; |
| int cpu; |
| |
| if (!do_rapl) |
| return 0; |
| |
| /* RAPL counters are per package, so print only for 1st thread/package */ |
| if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE) || !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) |
| return 0; |
| |
| cpu = t->cpu_id; |
| if (cpu_migrate(cpu)) { |
| fprintf(outf, "Could not migrate to CPU %d\n", cpu); |
| return -1; |
| } |
| |
| if (get_msr(cpu, MSR_RAPL_POWER_UNIT, &msr)) |
| return -1; |
| |
| fprintf(outf, "cpu%d: MSR_RAPL_POWER_UNIT: 0x%08llx (%f Watts, %f Joules, %f sec.)\n", cpu, msr, |
| rapl_power_units, rapl_energy_units, rapl_time_units); |
| |
| if (do_rapl & RAPL_PKG_POWER_INFO) { |
| |
| if (get_msr(cpu, MSR_PKG_POWER_INFO, &msr)) |
| return -5; |
| |
| |
| fprintf(outf, "cpu%d: MSR_PKG_POWER_INFO: 0x%08llx (%.0f W TDP, RAPL %.0f - %.0f W, %f sec.)\n", |
| cpu, msr, |
| ((msr >> 0) & RAPL_POWER_GRANULARITY) * rapl_power_units, |
| ((msr >> 16) & RAPL_POWER_GRANULARITY) * rapl_power_units, |
| ((msr >> 32) & RAPL_POWER_GRANULARITY) * rapl_power_units, |
| ((msr >> 48) & RAPL_TIME_GRANULARITY) * rapl_time_units); |
| |
| } |
| if (do_rapl & RAPL_PKG) { |
| |
| if (get_msr(cpu, MSR_PKG_POWER_LIMIT, &msr)) |
| return -9; |
| |
| fprintf(outf, "cpu%d: MSR_PKG_POWER_LIMIT: 0x%08llx (%slocked)\n", |
| cpu, msr, (msr >> 63) & 1 ? "" : "UN"); |
| |
| print_power_limit_msr(cpu, msr, "PKG Limit #1"); |
| fprintf(outf, "cpu%d: PKG Limit #2: %sabled (%f Watts, %f* sec, clamp %sabled)\n", |
| cpu, |
| ((msr >> 47) & 1) ? "EN" : "DIS", |
| ((msr >> 32) & 0x7FFF) * rapl_power_units, |
| (1.0 + (((msr >> 54) & 0x3)/4.0)) * (1 << ((msr >> 49) & 0x1F)) * rapl_time_units, |
| ((msr >> 48) & 1) ? "EN" : "DIS"); |
| } |
| |
| if (do_rapl & RAPL_DRAM_POWER_INFO) { |
| if (get_msr(cpu, MSR_DRAM_POWER_INFO, &msr)) |
| return -6; |
| |
| fprintf(outf, "cpu%d: MSR_DRAM_POWER_INFO,: 0x%08llx (%.0f W TDP, RAPL %.0f - %.0f W, %f sec.)\n", |
| cpu, msr, |
| ((msr >> 0) & RAPL_POWER_GRANULARITY) * rapl_power_units, |
| ((msr >> 16) & RAPL_POWER_GRANULARITY) * rapl_power_units, |
| ((msr >> 32) & RAPL_POWER_GRANULARITY) * rapl_power_units, |
| ((msr >> 48) & RAPL_TIME_GRANULARITY) * rapl_time_units); |
| } |
| if (do_rapl & RAPL_DRAM) { |
| if (get_msr(cpu, MSR_DRAM_POWER_LIMIT, &msr)) |
| return -9; |
| fprintf(outf, "cpu%d: MSR_DRAM_POWER_LIMIT: 0x%08llx (%slocked)\n", |
| cpu, msr, (msr >> 31) & 1 ? "" : "UN"); |
| |
| print_power_limit_msr(cpu, msr, "DRAM Limit"); |
| } |
| if (do_rapl & RAPL_CORE_POLICY) { |
| if (get_msr(cpu, MSR_PP0_POLICY, &msr)) |
| return -7; |
| |
| fprintf(outf, "cpu%d: MSR_PP0_POLICY: %lld\n", cpu, msr & 0xF); |
| } |
| if (do_rapl & RAPL_CORES_POWER_LIMIT) { |
| if (get_msr(cpu, MSR_PP0_POWER_LIMIT, &msr)) |
| return -9; |
| fprintf(outf, "cpu%d: MSR_PP0_POWER_LIMIT: 0x%08llx (%slocked)\n", |
| cpu, msr, (msr >> 31) & 1 ? "" : "UN"); |
| print_power_limit_msr(cpu, msr, "Cores Limit"); |
| } |
| if (do_rapl & RAPL_GFX) { |
| if (get_msr(cpu, MSR_PP1_POLICY, &msr)) |
| return -8; |
| |
| fprintf(outf, "cpu%d: MSR_PP1_POLICY: %lld\n", cpu, msr & 0xF); |
| |
| if (get_msr(cpu, MSR_PP1_POWER_LIMIT, &msr)) |
| return -9; |
| fprintf(outf, "cpu%d: MSR_PP1_POWER_LIMIT: 0x%08llx (%slocked)\n", |
| cpu, msr, (msr >> 31) & 1 ? "" : "UN"); |
| print_power_limit_msr(cpu, msr, "GFX Limit"); |
| } |
| return 0; |
| } |
| |
| /* |
| * SNB adds support for additional MSRs: |
| * |
| * MSR_PKG_C7_RESIDENCY 0x000003fa |
| * MSR_CORE_C7_RESIDENCY 0x000003fe |
| * MSR_PKG_C2_RESIDENCY 0x0000060d |
| */ |
| |
| int has_snb_msrs(unsigned int family, unsigned int model) |
| { |
| if (!genuine_intel) |
| return 0; |
| |
| switch (model) { |
| case INTEL_FAM6_SANDYBRIDGE: |
| case INTEL_FAM6_SANDYBRIDGE_X: |
| case INTEL_FAM6_IVYBRIDGE: /* IVB */ |
| case INTEL_FAM6_IVYBRIDGE_X: /* IVB Xeon */ |
| case INTEL_FAM6_HASWELL_CORE: /* HSW */ |
| case INTEL_FAM6_HASWELL_X: /* HSW */ |
| case INTEL_FAM6_HASWELL_GT3E: /* HSW */ |
| case INTEL_FAM6_BROADWELL_CORE: /* BDW */ |
| case INTEL_FAM6_BROADWELL_GT3E: /* BDW */ |
| case INTEL_FAM6_BROADWELL_X: /* BDX */ |
| case INTEL_FAM6_SKYLAKE_MOBILE: /* SKL */ |
| case INTEL_FAM6_CANNONLAKE_MOBILE: /* CNL */ |
| case INTEL_FAM6_SKYLAKE_X: /* SKX */ |
| case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ |
| case INTEL_FAM6_ATOM_GOLDMONT_PLUS: |
| case INTEL_FAM6_ATOM_GOLDMONT_X: /* DNV */ |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* |
| * HSW adds support for additional MSRs: |
| * |
| * MSR_PKG_C8_RESIDENCY 0x00000630 |
| * MSR_PKG_C9_RESIDENCY 0x00000631 |
| * MSR_PKG_C10_RESIDENCY 0x00000632 |
| * |
| * MSR_PKGC8_IRTL 0x00000633 |
| * MSR_PKGC9_IRTL 0x00000634 |
| * MSR_PKGC10_IRTL 0x00000635 |
| * |
| */ |
| int has_hsw_msrs(unsigned int family, unsigned int model) |
| { |
| if (!genuine_intel) |
| return 0; |
| |
| switch (model) { |
| case INTEL_FAM6_HASWELL_CORE: |
| case INTEL_FAM6_BROADWELL_CORE: /* BDW */ |
| case INTEL_FAM6_SKYLAKE_MOBILE: /* SKL */ |
| case INTEL_FAM6_CANNONLAKE_MOBILE: /* CNL */ |
| case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ |
| case INTEL_FAM6_ATOM_GOLDMONT_PLUS: |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* |
| * SKL adds support for additional MSRS: |
| * |
| * MSR_PKG_WEIGHTED_CORE_C0_RES 0x00000658 |
| * MSR_PKG_ANY_CORE_C0_RES 0x00000659 |
| * MSR_PKG_ANY_GFXE_C0_RES 0x0000065A |
| * MSR_PKG_BOTH_CORE_GFXE_C0_RES 0x0000065B |
| */ |
| int has_skl_msrs(unsigned int family, unsigned int model) |
| { |
| if (!genuine_intel) |
| return 0; |
| |
| switch (model) { |
| case INTEL_FAM6_SKYLAKE_MOBILE: /* SKL */ |
| case INTEL_FAM6_CANNONLAKE_MOBILE: /* CNL */ |
| return 1; |
| } |
| return 0; |
| } |
| |
| int is_slm(unsigned int family, unsigned int model) |
| { |
| if (!genuine_intel) |
| return 0; |
| switch (model) { |
| case INTEL_FAM6_ATOM_SILVERMONT: /* BYT */ |
| case INTEL_FAM6_ATOM_SILVERMONT_X: /* AVN */ |
| return 1; |
| } |
| return 0; |
| } |
| |
| int is_knl(unsigned int family, unsigned int model) |
| { |
| if (!genuine_intel) |
| return 0; |
| switch (model) { |
| case INTEL_FAM6_XEON_PHI_KNL: /* KNL */ |
| return 1; |
| } |
| return 0; |
| } |
| |
| int is_cnl(unsigned int family, unsigned int model) |
| { |
| if (!genuine_intel) |
| return 0; |
| |
| switch (model) { |
| case INTEL_FAM6_CANNONLAKE_MOBILE: /* CNL */ |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| unsigned int get_aperf_mperf_multiplier(unsigned int family, unsigned int model) |
| { |
| if (is_knl(family, model)) |
| return 1024; |
| return 1; |
| } |
| |
| #define SLM_BCLK_FREQS 5 |
| double slm_freq_table[SLM_BCLK_FREQS] = { 83.3, 100.0, 133.3, 116.7, 80.0}; |
| |
| double slm_bclk(void) |
| { |
| unsigned long long msr = 3; |
| unsigned int i; |
| double freq; |
| |
| if (get_msr(base_cpu, MSR_FSB_FREQ, &msr)) |
| fprintf(outf, "SLM BCLK: unknown\n"); |
| |
| i = msr & 0xf; |
| if (i >= SLM_BCLK_FREQS) { |
| fprintf(outf, "SLM BCLK[%d] invalid\n", i); |
| i = 3; |
| } |
| freq = slm_freq_table[i]; |
| |
| if (!quiet) |
| fprintf(outf, "SLM BCLK: %.1f Mhz\n", freq); |
| |
| return freq; |
| } |
| |
| double discover_bclk(unsigned int family, unsigned int model) |
| { |
| if (has_snb_msrs(family, model) || is_knl(family, model)) |
| return 100.00; |
| else if (is_slm(family, model)) |
| return slm_bclk(); |
| else |
| return 133.33; |
| } |
| |
| /* |
| * MSR_IA32_TEMPERATURE_TARGET indicates the temperature where |
| * the Thermal Control Circuit (TCC) activates. |
| * This is usually equal to tjMax. |
| * |
| * Older processors do not have this MSR, so there we guess, |
| * but also allow cmdline over-ride with -T. |
| * |
| * Several MSR temperature values are in units of degrees-C |
| * below this value, including the Digital Thermal Sensor (DTS), |
| * Package Thermal Management Sensor (PTM), and thermal event thresholds. |
| */ |
| int set_temperature_target(struct thread_data *t, struct core_data *c, struct pkg_data *p) |
| { |
| unsigned long long msr; |
| unsigned int target_c_local; |
| int cpu; |
| |
| /* tcc_activation_temp is used only for dts or ptm */ |
| if (!(do_dts || do_ptm)) |
| return 0; |
| |
| /* this is a per-package concept */ |
| if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE) || !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) |
| return 0; |
| |
| cpu = t->cpu_id; |
| if (cpu_migrate(cpu)) { |
| fprintf(outf, "Could not migrate to CPU %d\n", cpu); |
| return -1; |
| } |
| |
| if (tcc_activation_temp_override != 0) { |
| tcc_activation_temp = tcc_activation_temp_override; |
| fprintf(outf, "cpu%d: Using cmdline TCC Target (%d C)\n", |
| cpu, tcc_activation_temp); |
| return 0; |
| } |
| |
| /* Temperature Target MSR is Nehalem and newer only */ |
| if (!do_nhm_platform_info) |
| goto guess; |
| |
| if (get_msr(base_cpu, MSR_IA32_TEMPERATURE_TARGET, &msr)) |
| goto guess; |
| |
| target_c_local = (msr >> 16) & 0xFF; |
| |
| if (!quiet) |
| fprintf(outf, "cpu%d: MSR_IA32_TEMPERATURE_TARGET: 0x%08llx (%d C)\n", |
| cpu, msr, target_c_local); |
| |
| if (!target_c_local) |
| goto guess; |
| |
| tcc_activation_temp = target_c_local; |
| |
| return 0; |
| |
| guess: |
| tcc_activation_temp = TJMAX_DEFAULT; |
| fprintf(outf, "cpu%d: Guessing tjMax %d C, Please use -T to specify\n", |
| cpu, tcc_activation_temp); |
| |
| return 0; |
| } |
| |
| void decode_feature_control_msr(void) |
| { |
| unsigned long long msr; |
| |
| if (!get_msr(base_cpu, MSR_IA32_FEATURE_CONTROL, &msr)) |
| fprintf(outf, "cpu%d: MSR_IA32_FEATURE_CONTROL: 0x%08llx (%sLocked %s)\n", |
| base_cpu, msr, |
| msr & FEATURE_CONTROL_LOCKED ? "" : "UN-", |
| msr & (1 << 18) ? "SGX" : ""); |
| } |
| |
| void decode_misc_enable_msr(void) |
| { |
| unsigned long long msr; |
| |
| if (!genuine_intel) |
| return; |
| |
| if (!get_msr(base_cpu, MSR_IA32_MISC_ENABLE, &msr)) |
| fprintf(outf, "cpu%d: MSR_IA32_MISC_ENABLE: 0x%08llx (%sTCC %sEIST %sMWAIT %sPREFETCH %sTURBO)\n", |
| base_cpu, msr, |
| msr & MSR_IA32_MISC_ENABLE_TM1 ? "" : "No-", |
| msr & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP ? "" : "No-", |
| msr & MSR_IA32_MISC_ENABLE_MWAIT ? "" : "No-", |
| msr & MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE ? "No-" : "", |
| msr & MSR_IA32_MISC_ENABLE_TURBO_DISABLE ? "No-" : ""); |
| } |
| |
| void decode_misc_feature_control(void) |
| { |
| unsigned long long msr; |
| |
| if (!has_misc_feature_control) |
| return; |
| |
| if (!get_msr(base_cpu, MSR_MISC_FEATURE_CONTROL, &msr)) |
| fprintf(outf, "cpu%d: MSR_MISC_FEATURE_CONTROL: 0x%08llx (%sL2-Prefetch %sL2-Prefetch-pair %sL1-Prefetch %sL1-IP-Prefetch)\n", |
| base_cpu, msr, |
| msr & (0 << 0) ? "No-" : "", |
| msr & (1 << 0) ? "No-" : "", |
| msr & (2 << 0) ? "No-" : "", |
| msr & (3 << 0) ? "No-" : ""); |
| } |
| /* |
| * Decode MSR_MISC_PWR_MGMT |
| * |
| * Decode the bits according to the Nehalem documentation |
| * bit[0] seems to continue to have same meaning going forward |
| * bit[1] less so... |
| */ |
| void decode_misc_pwr_mgmt_msr(void) |
| { |
| unsigned long long msr; |
| |
| if (!do_nhm_platform_info) |
| return; |
| |
| if (no_MSR_MISC_PWR_MGMT) |
| return; |
| |
| if (!get_msr(base_cpu, MSR_MISC_PWR_MGMT, &msr)) |
| fprintf(outf, "cpu%d: MSR_MISC_PWR_MGMT: 0x%08llx (%sable-EIST_Coordination %sable-EPB %sable-OOB)\n", |
| base_cpu, msr, |
| msr & (1 << 0) ? "DIS" : "EN", |
| msr & (1 << 1) ? "EN" : "DIS", |
| msr & (1 << 8) ? "EN" : "DIS"); |
| } |
| /* |
| * Decode MSR_CC6_DEMOTION_POLICY_CONFIG, MSR_MC6_DEMOTION_POLICY_CONFIG |
| * |
| * This MSRs are present on Silvermont processors, |
| * Intel Atom processor E3000 series (Baytrail), and friends. |
| */ |
| void decode_c6_demotion_policy_msr(void) |
| { |
| unsigned long long msr; |
| |
| if (!get_msr(base_cpu, MSR_CC6_DEMOTION_POLICY_CONFIG, &msr)) |
| fprintf(outf, "cpu%d: MSR_CC6_DEMOTION_POLICY_CONFIG: 0x%08llx (%sable-CC6-Demotion)\n", |
| base_cpu, msr, msr & (1 << 0) ? "EN" : "DIS"); |
| |
| if (!get_msr(base_cpu, MSR_MC6_DEMOTION_POLICY_CONFIG, &msr)) |
| fprintf(outf, "cpu%d: MSR_MC6_DEMOTION_POLICY_CONFIG: 0x%08llx (%sable-MC6-Demotion)\n", |
| base_cpu, msr, msr & (1 << 0) ? "EN" : "DIS"); |
| } |
| |
| /* |
| * When models are the same, for the purpose of turbostat, reuse |
| */ |
| unsigned int intel_model_duplicates(unsigned int model) |
| { |
| |
| switch(model) { |
| case INTEL_FAM6_NEHALEM_EP: /* Core i7, Xeon 5500 series - Bloomfield, Gainstown NHM-EP */ |
| case INTEL_FAM6_NEHALEM: /* Core i7 and i5 Processor - Clarksfield, Lynnfield, Jasper Forest */ |
| case 0x1F: /* Core i7 and i5 Processor - Nehalem */ |
| case INTEL_FAM6_WESTMERE: /* Westmere Client - Clarkdale, Arrandale */ |
| case INTEL_FAM6_WESTMERE_EP: /* Westmere EP - Gulftown */ |
| return INTEL_FAM6_NEHALEM; |
| |
| case INTEL_FAM6_NEHALEM_EX: /* Nehalem-EX Xeon - Beckton */ |
| case INTEL_FAM6_WESTMERE_EX: /* Westmere-EX Xeon - Eagleton */ |
| return INTEL_FAM6_NEHALEM_EX; |
| |
| case INTEL_FAM6_XEON_PHI_KNM: |
| return INTEL_FAM6_XEON_PHI_KNL; |
| |
| case INTEL_FAM6_HASWELL_ULT: |
| return INTEL_FAM6_HASWELL_CORE; |
| |
| case INTEL_FAM6_BROADWELL_X: |
| case INTEL_FAM6_BROADWELL_XEON_D: /* BDX-DE */ |
| return INTEL_FAM6_BROADWELL_X; |
| |
| case INTEL_FAM6_SKYLAKE_MOBILE: |
| case INTEL_FAM6_SKYLAKE_DESKTOP: |
| case INTEL_FAM6_KABYLAKE_MOBILE: |
| case INTEL_FAM6_KABYLAKE_DESKTOP: |
| return INTEL_FAM6_SKYLAKE_MOBILE; |
| } |
| return model; |
| } |
| void process_cpuid() |
| { |
| unsigned int eax, ebx, ecx, edx; |
| unsigned int fms, family, model, stepping, ecx_flags, edx_flags; |
| unsigned int has_turbo; |
| |
| eax = ebx = ecx = edx = 0; |
| |
| __cpuid(0, max_level, ebx, ecx, edx); |
| |
| if (ebx == 0x756e6547 && ecx == 0x6c65746e && edx == 0x49656e69) |
| genuine_intel = 1; |
| else if (ebx == 0x68747541 && ecx == 0x444d4163 && edx == 0x69746e65) |
| authentic_amd = 1; |
| |
| if (!quiet) |
| fprintf(outf, "CPUID(0): %.4s%.4s%.4s ", |
| (char *)&ebx, (char *)&edx, (char *)&ecx); |
| |
| __cpuid(1, fms, ebx, ecx, edx); |
| family = (fms >> 8) & 0xf; |
| model = (fms >> 4) & 0xf; |
| stepping = fms & 0xf; |
| if (family == 0xf) |
| family += (fms >> 20) & 0xff; |
| if (family >= 6) |
| model += ((fms >> 16) & 0xf) << 4; |
| ecx_flags = ecx; |
| edx_flags = edx; |
| |
| /* |
| * check max extended function levels of CPUID. |
| * This is needed to check for invariant TSC. |
| * This check is valid for both Intel and AMD. |
| */ |
| ebx = ecx = edx = 0; |
| __cpuid(0x80000000, max_extended_level, ebx, ecx, edx); |
| |
| if (!quiet) { |
| fprintf(outf, "0x%x CPUID levels; 0x%x xlevels; family:model:stepping 0x%x:%x:%x (%d:%d:%d)\n", |
| max_level, max_extended_level, family, model, stepping, family, model, stepping); |
| fprintf(outf, "CPUID(1): %s %s %s %s %s %s %s %s %s %s\n", |
| ecx_flags & (1 << 0) ? "SSE3" : "-", |
| ecx_flags & (1 << 3) ? "MONITOR" : "-", |
| ecx_flags & (1 << 6) ? "SMX" : "-", |
| ecx_flags & (1 << 7) ? "EIST" : "-", |
| ecx_flags & (1 << 8) ? "TM2" : "-", |
| edx_flags & (1 << 4) ? "TSC" : "-", |
| edx_flags & (1 << 5) ? "MSR" : "-", |
| edx_flags & (1 << 22) ? "ACPI-TM" : "-", |
| edx_flags & (1 << 28) ? "HT" : "-", |
| edx_flags & (1 << 29) ? "TM" : "-"); |
| } |
| if (genuine_intel) |
| model = intel_model_duplicates(model); |
| |
| if (!(edx_flags & (1 << 5))) |
| errx(1, "CPUID: no MSR"); |
| |
| if (max_extended_level >= 0x80000007) { |
| |
| /* |
| * Non-Stop TSC is advertised by CPUID.EAX=0x80000007: EDX.bit8 |
| * this check is valid for both Intel and AMD |
| */ |
| __cpuid(0x80000007, eax, ebx, ecx, edx); |
| has_invariant_tsc = edx & (1 << 8); |
| } |
| |
| /* |
| * APERF/MPERF is advertised by CPUID.EAX=0x6: ECX.bit0 |
| * this check is valid for both Intel and AMD |
| */ |
| |
| __cpuid(0x6, eax, ebx, ecx, edx); |
| has_aperf = ecx & (1 << 0); |
| if (has_aperf) { |
| BIC_PRESENT(BIC_Avg_MHz); |
| BIC_PRESENT(BIC_Busy); |
| BIC_PRESENT(BIC_Bzy_MHz); |
| } |
| do_dts = eax & (1 << 0); |
| if (do_dts) |
| BIC_PRESENT(BIC_CoreTmp); |
| has_turbo = eax & (1 << 1); |
| do_ptm = eax & (1 << 6); |
| if (do_ptm) |
| BIC_PRESENT(BIC_PkgTmp); |
| has_hwp = eax & (1 << 7); |
| has_hwp_notify = eax & (1 << 8); |
| has_hwp_activity_window = eax & (1 << 9); |
| has_hwp_epp = eax & (1 << 10); |
| has_hwp_pkg = eax & (1 << 11); |
| has_epb = ecx & (1 << 3); |
| |
| if (!quiet) |
| fprintf(outf, "CPUID(6): %sAPERF, %sTURBO, %sDTS, %sPTM, %sHWP, " |
| "%sHWPnotify, %sHWPwindow, %sHWPepp, %sHWPpkg, %sEPB\n", |
| has_aperf ? "" : "No-", |
| has_turbo ? "" : "No-", |
| do_dts ? "" : "No-", |
| do_ptm ? "" : "No-", |
| has_hwp ? "" : "No-", |
| has_hwp_notify ? "" : "No-", |
| has_hwp_activity_window ? "" : "No-", |
| has_hwp_epp ? "" : "No-", |
| has_hwp_pkg ? "" : "No-", |
| has_epb ? "" : "No-"); |
| |
| if (!quiet) |
| decode_misc_enable_msr(); |
| |
| |
| if (max_level >= 0x7 && !quiet) { |
| int has_sgx; |
| |
| ecx = 0; |
| |
| __cpuid_count(0x7, 0, eax, ebx, ecx, edx); |
| |
| has_sgx = ebx & (1 << 2); |
| fprintf(outf, "CPUID(7): %sSGX\n", has_sgx ? "" : "No-"); |
| |
| if (has_sgx) |
| decode_feature_control_msr(); |
| } |
| |
| if (max_level >= 0x15) { |
| unsigned int eax_crystal; |
| unsigned int ebx_tsc; |
| |
| /* |
| * CPUID 15H TSC/Crystal ratio, possibly Crystal Hz |
| */ |
| eax_crystal = ebx_tsc = crystal_hz = edx = 0; |
| __cpuid(0x15, eax_crystal, ebx_tsc, crystal_hz, edx); |
| |
| if (ebx_tsc != 0) { |
| |
| if (!quiet && (ebx != 0)) |
| fprintf(outf, "CPUID(0x15): eax_crystal: %d ebx_tsc: %d ecx_crystal_hz: %d\n", |
| eax_crystal, ebx_tsc, crystal_hz); |
| |
| if (crystal_hz == 0) |
| switch(model) { |
| case INTEL_FAM6_SKYLAKE_MOBILE: /* SKL */ |
| crystal_hz = 24000000; /* 24.0 MHz */ |
| break; |
| case INTEL_FAM6_ATOM_GOLDMONT_X: /* DNV */ |
| crystal_hz = 25000000; /* 25.0 MHz */ |
| break; |
| case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ |
| case INTEL_FAM6_ATOM_GOLDMONT_PLUS: |
| crystal_hz = 19200000; /* 19.2 MHz */ |
| break; |
| default: |
| crystal_hz = 0; |
| } |
| |
| if (crystal_hz) { |
| tsc_hz = (unsigned long long) crystal_hz * ebx_tsc / eax_crystal; |
| if (!quiet) |
| fprintf(outf, "TSC: %lld MHz (%d Hz * %d / %d / 1000000)\n", |
| tsc_hz / 1000000, crystal_hz, ebx_tsc, eax_crystal); |
| } |
| } |
| } |
| if (max_level >= 0x16) { |
| unsigned int base_mhz, max_mhz, bus_mhz, edx; |
| |
| /* |
| * CPUID 16H Base MHz, Max MHz, Bus MHz |
| */ |
| base_mhz = max_mhz = bus_mhz = edx = 0; |
| |
| __cpuid(0x16, base_mhz, max_mhz, bus_mhz, edx); |
| if (!quiet) |
| fprintf(outf, "CPUID(0x16): base_mhz: %d max_mhz: %d bus_mhz: %d\n", |
| base_mhz, max_mhz, bus_mhz); |
| } |
| |
| if (has_aperf) |
| aperf_mperf_multiplier = get_aperf_mperf_multiplier(family, model); |
| |
| BIC_PRESENT(BIC_IRQ); |
| BIC_PRESENT(BIC_TSC_MHz); |
| |
| if (probe_nhm_msrs(family, model)) { |
| do_nhm_platform_info = 1; |
| BIC_PRESENT(BIC_CPU_c1); |
| BIC_PRESENT(BIC_CPU_c3); |
| BIC_PRESENT(BIC_CPU_c6); |
| BIC_PRESENT(BIC_SMI); |
| } |
| do_snb_cstates = has_snb_msrs(family, model); |
| |
| if (do_snb_cstates) |
| BIC_PRESENT(BIC_CPU_c7); |
| |
| do_irtl_snb = has_snb_msrs(family, model); |
| if (do_snb_cstates && (pkg_cstate_limit >= PCL__2)) |
| BIC_PRESENT(BIC_Pkgpc2); |
| if (pkg_cstate_limit >= PCL__3) |
| BIC_PRESENT(BIC_Pkgpc3); |
| if (pkg_cstate_limit >= PCL__6) |
| BIC_PRESENT(BIC_Pkgpc6); |
| if (do_snb_cstates && (pkg_cstate_limit >= PCL__7)) |
| BIC_PRESENT(BIC_Pkgpc7); |
| if (has_slv_msrs(family, model)) { |
| BIC_NOT_PRESENT(BIC_Pkgpc2); |
| BIC_NOT_PRESENT(BIC_Pkgpc3); |
| BIC_PRESENT(BIC_Pkgpc6); |
| BIC_NOT_PRESENT(BIC_Pkgpc7); |
| BIC_PRESENT(BIC_Mod_c6); |
| use_c1_residency_msr = 1; |
| } |
| if (is_dnv(family, model)) { |
| BIC_PRESENT(BIC_CPU_c1); |
| BIC_NOT_PRESENT(BIC_CPU_c3); |
| BIC_NOT_PRESENT(BIC_Pkgpc3); |
| BIC_NOT_PRESENT(BIC_CPU_c7); |
| BIC_NOT_PRESENT(BIC_Pkgpc7); |
| use_c1_residency_msr = 1; |
| } |
| if (is_skx(family, model)) { |
| BIC_NOT_PRESENT(BIC_CPU_c3); |
| BIC_NOT_PRESENT(BIC_Pkgpc3); |
| BIC_NOT_PRESENT(BIC_CPU_c7); |
| BIC_NOT_PRESENT(BIC_Pkgpc7); |
| } |
| if (is_bdx(family, model)) { |
| BIC_NOT_PRESENT(BIC_CPU_c7); |
| BIC_NOT_PRESENT(BIC_Pkgpc7); |
| } |
| if (has_hsw_msrs(family, model)) { |
| BIC_PRESENT(BIC_Pkgpc8); |
| BIC_PRESENT(BIC_Pkgpc9); |
| BIC_PRESENT(BIC_Pkgpc10); |
| } |
| do_irtl_hsw = has_hsw_msrs(family, model); |
| if (has_skl_msrs(family, model)) { |
| BIC_PRESENT(BIC_Totl_c0); |
| BIC_PRESENT(BIC_Any_c0); |
| BIC_PRESENT(BIC_GFX_c0); |
| BIC_PRESENT(BIC_CPUGFX); |
| } |
| do_slm_cstates = is_slm(family, model); |
| do_knl_cstates = is_knl(family, model); |
| do_cnl_cstates = is_cnl(family, model); |
| |
| if (!quiet) |
| decode_misc_pwr_mgmt_msr(); |
| |
| if (!quiet && has_slv_msrs(family, model)) |
| decode_c6_demotion_policy_msr(); |
| |
| rapl_probe(family, model); |
| perf_limit_reasons_probe(family, model); |
| automatic_cstate_conversion_probe(family, model); |
| |
| if (!quiet) |
| dump_cstate_pstate_config_info(family, model); |
| |
| if (!quiet) |
| dump_sysfs_cstate_config(); |
| if (!quiet) |
| dump_sysfs_pstate_config(); |
| |
| if (has_skl_msrs(family, model)) |
| calculate_tsc_tweak(); |
| |
| if (!access("/sys/class/drm/card0/power/rc6_residency_ms", R_OK)) |
| BIC_PRESENT(BIC_GFX_rc6); |
| |
| if (!access("/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz", R_OK)) |
| BIC_PRESENT(BIC_GFXMHz); |
| |
| if (!access("/sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us", R_OK)) |
| BIC_PRESENT(BIC_CPU_LPI); |
| else |
| BIC_NOT_PRESENT(BIC_CPU_LPI); |
| |
| if (!access("/sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us", R_OK)) |
| BIC_PRESENT(BIC_SYS_LPI); |
| else |
| BIC_NOT_PRESENT(BIC_SYS_LPI); |
| |
| if (!quiet) |
| decode_misc_feature_control(); |
| |
| return; |
| } |
| |
| /* |
| * in /dev/cpu/ return success for names that are numbers |
| * ie. filter out ".", "..", "microcode". |
| */ |
| int dir_filter(const struct dirent *dirp) |
| { |
| if (isdigit(dirp->d_name[0])) |
| return 1; |
| else |
| return 0; |
| } |
| |
| int open_dev_cpu_msr(int dummy1) |
| { |
| return 0; |
| } |
| |
| void topology_probe() |
| { |
| int i; |
| int max_core_id = 0; |
| int max_package_id = 0; |
| int max_siblings = 0; |
| |
| /* Initialize num_cpus, max_cpu_num */ |
| set_max_cpu_num(); |
| topo.num_cpus = 0; |
| for_all_proc_cpus(count_cpus); |
| if (!summary_only && topo.num_cpus > 1) |
| BIC_PRESENT(BIC_CPU); |
| |
| if (debug > 1) |
| fprintf(outf, "num_cpus %d max_cpu_num %d\n", topo.num_cpus, topo.max_cpu_num); |
| |
| cpus = calloc(1, (topo.max_cpu_num + 1) * sizeof(struct cpu_topology)); |
| if (cpus == NULL) |
| err(1, "calloc cpus"); |
| |
| /* |
| * Allocate and initialize cpu_present_set |
| */ |
| cpu_present_set = CPU_ALLOC((topo.max_cpu_num + 1)); |
| if (cpu_present_set == NULL) |
| err(3, "CPU_ALLOC"); |
| cpu_present_setsize = CPU_ALLOC_SIZE((topo.max_cpu_num + 1)); |
| CPU_ZERO_S(cpu_present_setsize, cpu_present_set); |
| for_all_proc_cpus(mark_cpu_present); |
| |
| /* |
| * Validate that all cpus in cpu_subset are also in cpu_present_set |
| */ |
| for (i = 0; i < CPU_SUBSET_MAXCPUS; ++i) { |
| if (CPU_ISSET_S(i, cpu_subset_size, cpu_subset)) |
| if (!CPU_ISSET_S(i, cpu_present_setsize, cpu_present_set)) |
| err(1, "cpu%d not present", i); |
| } |
| |
| /* |
| * Allocate and initialize cpu_affinity_set |
| */ |
| cpu_affinity_set = CPU_ALLOC((topo.max_cpu_num + 1)); |
| if (cpu_affinity_set == NULL) |
| err(3, "CPU_ALLOC"); |
| cpu_affinity_setsize = CPU_ALLOC_SIZE((topo.max_cpu_num + 1)); |
| CPU_ZERO_S(cpu_affinity_setsize, cpu_affinity_set); |
| |
| for_all_proc_cpus(init_thread_id); |
| |
| /* |
| * For online cpus |
| * find max_core_id, max_package_id |
| */ |
| for (i = 0; i <= topo.max_cpu_num; ++i) { |
| int siblings; |
| |
| if (cpu_is_not_present(i)) { |
| if (debug > 1) |
| fprintf(outf, "cpu%d NOT PRESENT\n", i); |
| continue; |
| } |
| |
| cpus[i].logical_cpu_id = i; |
| |
| /* get package information */ |
| cpus[i].physical_package_id = get_physical_package_id(i); |
| if (cpus[i].physical_package_id > max_package_id) |
| max_package_id = cpus[i].physical_package_id; |
| |
| /* get numa node information */ |
| cpus[i].physical_node_id = get_physical_node_id(&cpus[i]); |
| if (cpus[i].physical_node_id > topo.max_node_num) |
| topo.max_node_num = cpus[i].physical_node_id; |
| |
| /* get core information */ |
| cpus[i].physical_core_id = get_core_id(i); |
| if (cpus[i].physical_core_id > max_core_id) |
| max_core_id = cpus[i].physical_core_id; |
| |
| /* get thread information */ |
| siblings = get_thread_siblings(&cpus[i]); |
| if (siblings > max_siblings) |
| max_siblings = siblings; |
| if (cpus[i].thread_id == 0) |
| topo.num_cores++; |
| } |
| |
| topo.cores_per_node = max_core_id + 1; |
| if (debug > 1) |
| fprintf(outf, "max_core_id %d, sizing for %d cores per package\n", |
| max_core_id, topo.cores_per_node); |
| if (!summary_only && topo.cores_per_node > 1) |
| BIC_PRESENT(BIC_Core); |
| |
| topo.num_packages = max_package_id + 1; |
| if (debug > 1) |
| fprintf(outf, "max_package_id %d, sizing for %d packages\n", |
| max_package_id, topo.num_packages); |
| if (!summary_only && topo.num_packages > 1) |
| BIC_PRESENT(BIC_Package); |
| |
| set_node_data(); |
| if (debug > 1) |
| fprintf(outf, "nodes_per_pkg %d\n", topo.nodes_per_pkg); |
| if (!summary_only && topo.nodes_per_pkg > 1) |
| BIC_PRESENT(BIC_Node); |
| |
| topo.threads_per_core = max_siblings; |
| if (debug > 1) |
| fprintf(outf, "max_siblings %d\n", max_siblings); |
| |
| if (debug < 1) |
| return; |
| |
| for (i = 0; i <= topo.max_cpu_num; ++i) { |
| if (cpu_is_not_present(i)) |
| continue; |
| fprintf(outf, |
| "cpu %d pkg %d node %d lnode %d core %d thread %d\n", |
| i, cpus[i].physical_package_id, |
| cpus[i].physical_node_id, |
| cpus[i].logical_node_id, |
| cpus[i].physical_core_id, |
| cpus[i].thread_id); |
| } |
| |
| } |
| |
| void |
| allocate_counters(struct thread_data **t, struct core_data **c, |
| struct pkg_data **p) |
| { |
| int i; |
| int num_cores = topo.cores_per_node * topo.nodes_per_pkg * |
| topo.num_packages; |
| int num_threads = topo.threads_per_core * num_cores; |
| |
| *t = calloc(num_threads, sizeof(struct thread_data)); |
| if (*t == NULL) |
| goto error; |
| |
| for (i = 0; i < num_threads; i++) |
| (*t)[i].cpu_id = -1; |
| |
| *c = calloc(num_cores, sizeof(struct core_data)); |
| if (*c == NULL) |
| goto error; |
| |
| for (i = 0; i < num_cores; i++) |
| (*c)[i].core_id = -1; |
| |
| *p = calloc(topo.num_packages, sizeof(struct pkg_data)); |
| if (*p == NULL) |
| goto error; |
| |
| for (i = 0; i < topo.num_packages; i++) |
| (*p)[i].package_id = i; |
| |
| return; |
| error: |
| err(1, "calloc counters"); |
| } |
| /* |
| * init_counter() |
| * |
| * set FIRST_THREAD_IN_CORE and FIRST_CORE_IN_PACKAGE |
| */ |
| void init_counter(struct thread_data *thread_base, struct core_data *core_base, |
| struct pkg_data *pkg_base, int cpu_id) |
| { |
| int pkg_id = cpus[cpu_id].physical_package_id; |
| int node_id = cpus[cpu_id].logical_node_id; |
| int core_id = cpus[cpu_id].physical_core_id; |
| int thread_id = cpus[cpu_id].thread_id; |
| struct thread_data *t; |
| struct core_data *c; |
| struct pkg_data *p; |
| |
| |
| /* Workaround for systems where physical_node_id==-1 |
| * and logical_node_id==(-1 - topo.num_cpus) |
| */ |
| if (node_id < 0) |
| node_id = 0; |
| |
| t = GET_THREAD(thread_base, thread_id, core_id, node_id, pkg_id); |
| c = GET_CORE(core_base, core_id, node_id, pkg_id); |
| p = GET_PKG(pkg_base, pkg_id); |
| |
| t->cpu_id = cpu_id; |
| if (thread_id == 0) { |
| t->flags |= CPU_IS_FIRST_THREAD_IN_CORE; |
| if (cpu_is_first_core_in_package(cpu_id)) |
| t->flags |= CPU_IS_FIRST_CORE_IN_PACKAGE; |
| } |
| |
| c->core_id = core_id; |
| p->package_id = pkg_id; |
| } |
| |
| |
| int initialize_counters(int cpu_id) |
| { |
| init_counter(EVEN_COUNTERS, cpu_id); |
| init_counter(ODD_COUNTERS, cpu_id); |
| return 0; |
| } |
| |
| void allocate_output_buffer() |
| { |
| output_buffer = calloc(1, (1 + topo.num_cpus) * 1024); |
| outp = output_buffer; |
| if (outp == NULL) |
| err(-1, "calloc output buffer"); |
| } |
| void allocate_fd_percpu(void) |
| { |
| fd_percpu = calloc(topo.max_cpu_num + 1, sizeof(int)); |
| if (fd_percpu == NULL) |
| err(-1, "calloc fd_percpu"); |
| } |
| void allocate_irq_buffers(void) |
| { |
| irq_column_2_cpu = calloc(topo.num_cpus, sizeof(int)); |
| if (irq_column_2_cpu == NULL) |
| err(-1, "calloc %d", topo.num_cpus); |
| |
| irqs_per_cpu = calloc(topo.max_cpu_num + 1, sizeof(int)); |
| if (irqs_per_cpu == NULL) |
| err(-1, "calloc %d", topo.max_cpu_num + 1); |
| } |
| void setup_all_buffers(void) |
| { |
| topology_probe(); |
| allocate_irq_buffers(); |
| allocate_fd_percpu(); |
| allocate_counters(&thread_even, &core_even, &package_even); |
| allocate_counters(&thread_odd, &core_odd, &package_odd); |
| allocate_output_buffer(); |
| for_all_proc_cpus(initialize_counters); |
| } |
| |
| void set_base_cpu(void) |
| { |
| base_cpu = sched_getcpu(); |
| if (base_cpu < 0) |
| err(-ENODEV, "No valid cpus found"); |
| |
| if (debug > 1) |
| fprintf(outf, "base_cpu = %d\n", base_cpu); |
| } |
| |
| void turbostat_init() |
| { |
| setup_all_buffers(); |
| set_base_cpu(); |
| check_dev_msr(); |
| check_permissions(); |
| process_cpuid(); |
| |
| |
| if (!quiet) |
| for_all_cpus(print_hwp, ODD_COUNTERS); |
| |
| if (!quiet) |
| for_all_cpus(print_epb, ODD_COUNTERS); |
| |
| if (!quiet) |
| for_all_cpus(print_perf_limit, ODD_COUNTERS); |
| |
| if (!quiet) |
| for_all_cpus(print_rapl, ODD_COUNTERS); |
| |
| for_all_cpus(set_temperature_target, ODD_COUNTERS); |
| |
| if (!quiet) |
| for_all_cpus(print_thermal, ODD_COUNTERS); |
| |
| if (!quiet && do_irtl_snb) |
| print_irtl(); |
| } |
| |
| int fork_it(char **argv) |
| { |
| pid_t child_pid; |
| int status; |
| |
| snapshot_proc_sysfs_files(); |
| status = for_all_cpus(get_counters, EVEN_COUNTERS); |
| first_counter_read = 0; |
| if (status) |
| exit(status); |
| /* clear affinity side-effect of get_counters() */ |
| sched_setaffinity(0, cpu_present_setsize, cpu_present_set); |
| gettimeofday(&tv_even, (struct timezone *)NULL); |
| |
| child_pid = fork(); |
| if (!child_pid) { |
| /* child */ |
| execvp(argv[0], argv); |
| err(errno, "exec %s", argv[0]); |
| } else { |
| |
| /* parent */ |
| if (child_pid == -1) |
| err(1, "fork"); |
| |
| signal(SIGINT, SIG_IGN); |
| signal(SIGQUIT, SIG_IGN); |
| if (waitpid(child_pid, &status, 0) == -1) |
| err(status, "waitpid"); |
| } |
| /* |
| * n.b. fork_it() does not check for errors from for_all_cpus() |
| * because re-starting is problematic when forking |
| */ |
| snapshot_proc_sysfs_files(); |
| for_all_cpus(get_counters, ODD_COUNTERS); |
| gettimeofday(&tv_odd, (struct timezone *)NULL); |
| timersub(&tv_odd, &tv_even, &tv_delta); |
| if (for_all_cpus_2(delta_cpu, ODD_COUNTERS, EVEN_COUNTERS)) |
| fprintf(outf, "%s: Counter reset detected\n", progname); |
| else { |
| compute_average(EVEN_COUNTERS); |
| format_all_counters(EVEN_COUNTERS); |
| } |
| |
| fprintf(outf, "%.6f sec\n", tv_delta.tv_sec + tv_delta.tv_usec/1000000.0); |
| |
| flush_output_stderr(); |
| |
| return status; |
| } |
| |
| int get_and_dump_counters(void) |
| { |
| int status; |
| |
| snapshot_proc_sysfs_files(); |
| status = for_all_cpus(get_counters, ODD_COUNTERS); |
| if (status) |
| return status; |
| |
| status = for_all_cpus(dump_counters, ODD_COUNTERS); |
| if (status) |
| return status; |
| |
| flush_output_stdout(); |
| |
| return status; |
| } |
| |
| void print_version() { |
| fprintf(outf, "turbostat version 18.07.27" |
| " - Len Brown <lenb@kernel.org>\n"); |
| } |
| |
| int add_counter(unsigned int msr_num, char *path, char *name, |
| unsigned int width, enum counter_scope scope, |
| enum counter_type type, enum counter_format format, int flags) |
| { |
| struct msr_counter *msrp; |
| |
| msrp = calloc(1, sizeof(struct msr_counter)); |
| if (msrp == NULL) { |
| perror("calloc"); |
| exit(1); |
| } |
| |
| msrp->msr_num = msr_num; |
| strncpy(msrp->name, name, NAME_BYTES); |
| if (path) |
| strncpy(msrp->path, path, PATH_BYTES); |
| msrp->width = width; |
| msrp->type = type; |
| msrp->format = format; |
| msrp->flags = flags; |
| |
| switch (scope) { |
| |
| case SCOPE_CPU: |
| msrp->next = sys.tp; |
| sys.tp = msrp; |
| sys.added_thread_counters++; |
| if (sys.added_thread_counters > MAX_ADDED_THREAD_COUNTERS) { |
| fprintf(stderr, "exceeded max %d added thread counters\n", |
| MAX_ADDED_COUNTERS); |
| exit(-1); |
| } |
| break; |
| |
| case SCOPE_CORE: |
| msrp->next = sys.cp; |
| sys.cp = msrp; |
| sys.added_core_counters++; |
| if (sys.added_core_counters > MAX_ADDED_COUNTERS) { |
| fprintf(stderr, "exceeded max %d added core counters\n", |
| MAX_ADDED_COUNTERS); |
| exit(-1); |
| } |
| break; |
| |
| case SCOPE_PACKAGE: |
| msrp->next = sys.pp; |
| sys.pp = msrp; |
| sys.added_package_counters++; |
| if (sys.added_package_counters > MAX_ADDED_COUNTERS) { |
| fprintf(stderr, "exceeded max %d added package counters\n", |
| MAX_ADDED_COUNTERS); |
| exit(-1); |
| } |
| break; |
| } |
| |
| return 0; |
| } |
| |
| void parse_add_command(char *add_command) |
| { |
| int msr_num = 0; |
| char *path = NULL; |
| char name_buffer[NAME_BYTES] = ""; |
| int width = 64; |
| int fail = 0; |
| enum counter_scope scope = SCOPE_CPU; |
| enum counter_type type = COUNTER_CYCLES; |
| enum counter_format format = FORMAT_DELTA; |
| |
| while (add_command) { |
| |
| if (sscanf(add_command, "msr0x%x", &msr_num) == 1) |
| goto next; |
| |
| if (sscanf(add_command, "msr%d", &msr_num) == 1) |
| goto next; |
| |
| if (*add_command == '/') { |
| path = add_command; |
| goto next; |
| } |
| |
| if (sscanf(add_command, "u%d", &width) == 1) { |
| if ((width == 32) || (width == 64)) |
| goto next; |
| width = 64; |
| } |
| if (!strncmp(add_command, "cpu", strlen("cpu"))) { |
| scope = SCOPE_CPU; |
| goto next; |
| } |
| if (!strncmp(add_command, "core", strlen("core"))) { |
| scope = SCOPE_CORE; |
| goto next; |
| } |
| if (!strncmp(add_command, "package", strlen("package"))) { |
| scope = SCOPE_PACKAGE; |
| goto next; |
| } |
| if (!strncmp(add_command, "cycles", strlen("cycles"))) { |
| type = COUNTER_CYCLES; |
| goto next; |
| } |
| if (!strncmp(add_command, "seconds", strlen("seconds"))) { |
| type = COUNTER_SECONDS; |
| goto next; |
| } |
| if (!strncmp(add_command, "usec", strlen("usec"))) { |
| type = COUNTER_USEC; |
| goto next; |
| } |
| if (!strncmp(add_command, "raw", strlen("raw"))) { |
| format = FORMAT_RAW; |
| goto next; |
| } |
| if (!strncmp(add_command, "delta", strlen("delta"))) { |
| format = FORMAT_DELTA; |
| goto next; |
| } |
| if (!strncmp(add_command, "percent", strlen("percent"))) { |
| format = FORMAT_PERCENT; |
| goto next; |
| } |
| |
| if (sscanf(add_command, "%18s,%*s", name_buffer) == 1) { /* 18 < NAME_BYTES */ |
| char *eos; |
| |
| eos = strchr(name_buffer, ','); |
| if (eos) |
| *eos = '\0'; |
| goto next; |
| } |
| |
| next: |
| add_command = strchr(add_command, ','); |
| if (add_command) { |
| *add_command = '\0'; |
| add_command++; |
| } |
| |
| } |
| if ((msr_num == 0) && (path == NULL)) { |
| fprintf(stderr, "--add: (msrDDD | msr0xXXX | /path_to_counter ) required\n"); |
| fail++; |
| } |
| |
| /* generate default column header */ |
| if (*name_buffer == '\0') { |
| if (width == 32) |
| sprintf(name_buffer, "M0x%x%s", msr_num, format == FORMAT_PERCENT ? "%" : ""); |
| else |
| sprintf(name_buffer, "M0X%x%s", msr_num, format == FORMAT_PERCENT ? "%" : ""); |
| } |
| |
| if (add_counter(msr_num, path, name_buffer, width, scope, type, format, 0)) |
| fail++; |
| |
| if (fail) { |
| help(); |
| exit(1); |
| } |
| } |
| |
| int is_deferred_skip(char *name) |
| { |
| int i; |
| |
| for (i = 0; i < deferred_skip_index; ++i) |
| if (!strcmp(name, deferred_skip_names[i])) |
| return 1; |
| return 0; |
| } |
| |
| void probe_sysfs(void) |
| { |
| char path[64]; |
| char name_buf[16]; |
| FILE *input; |
| int state; |
| char *sp; |
| |
| if (!DO_BIC(BIC_sysfs)) |
| return; |
| |
| for (state = 10; state >= 0; --state) { |
| |
| sprintf(path, "/sys/devices/system/cpu/cpu%d/cpuidle/state%d/name", |
| base_cpu, state); |
| input = fopen(path, "r"); |
| if (input == NULL) |
| continue; |
| fgets(name_buf, sizeof(name_buf), input); |
| |
| /* truncate "C1-HSW\n" to "C1", or truncate "C1\n" to "C1" */ |
| sp = strchr(name_buf, '-'); |
| if (!sp) |
| sp = strchrnul(name_buf, '\n'); |
| *sp = '%'; |
| *(sp + 1) = '\0'; |
| |
| fclose(input); |
| |
| sprintf(path, "cpuidle/state%d/time", state); |
| |
| if (is_deferred_skip(name_buf)) |
| continue; |
| |
| add_counter(0, path, name_buf, 64, SCOPE_CPU, COUNTER_USEC, |
| FORMAT_PERCENT, SYSFS_PERCPU); |
| } |
| |
| for (state = 10; state >= 0; --state) { |
| |
| sprintf(path, "/sys/devices/system/cpu/cpu%d/cpuidle/state%d/name", |
| base_cpu, state); |
| input = fopen(path, "r"); |
| if (input == NULL) |
| continue; |
| fgets(name_buf, sizeof(name_buf), input); |
| /* truncate "C1-HSW\n" to "C1", or truncate "C1\n" to "C1" */ |
| sp = strchr(name_buf, '-'); |
| if (!sp) |
| sp = strchrnul(name_buf, '\n'); |
| *sp = '\0'; |
| fclose(input); |
| |
| sprintf(path, "cpuidle/state%d/usage", state); |
| |
| if (is_deferred_skip(name_buf)) |
| continue; |
| |
| add_counter(0, path, name_buf, 64, SCOPE_CPU, COUNTER_ITEMS, |
| FORMAT_DELTA, SYSFS_PERCPU); |
| } |
| |
| } |
| |
| |
| /* |
| * parse cpuset with following syntax |
| * 1,2,4..6,8-10 and set bits in cpu_subset |
| */ |
| void parse_cpu_command(char *optarg) |
| { |
| unsigned int start, end; |
| char *next; |
| |
| if (!strcmp(optarg, "core")) { |
| if (cpu_subset) |
| goto error; |
| show_core_only++; |
| return; |
| } |
| if (!strcmp(optarg, "package")) { |
| if (cpu_subset) |
| goto error; |
| show_pkg_only++; |
| return; |
| } |
| if (show_core_only || show_pkg_only) |
| goto error; |
| |
| cpu_subset = CPU_ALLOC(CPU_SUBSET_MAXCPUS); |
| if (cpu_subset == NULL) |
| err(3, "CPU_ALLOC"); |
| cpu_subset_size = CPU_ALLOC_SIZE(CPU_SUBSET_MAXCPUS); |
| |
| CPU_ZERO_S(cpu_subset_size, cpu_subset); |
| |
| next = optarg; |
| |
| while (next && *next) { |
| |
| if (*next == '-') /* no negative cpu numbers */ |
| goto error; |
| |
| start = strtoul(next, &next, 10); |
| |
| if (start >= CPU_SUBSET_MAXCPUS) |
| goto error; |
| CPU_SET_S(start, cpu_subset_size, cpu_subset); |
| |
| if (*next == '\0') |
| break; |
| |
| if (*next == ',') { |
| next += 1; |
| continue; |
| } |
| |
| if (*next == '-') { |
| next += 1; /* start range */ |
| } else if (*next == '.') { |
| next += 1; |
| if (*next == '.') |
| next += 1; /* start range */ |
| else |
| goto error; |
| } |
| |
| end = strtoul(next, &next, 10); |
| if (end <= start) |
| goto error; |
| |
| while (++start <= end) { |
| if (start >= CPU_SUBSET_MAXCPUS) |
| goto error; |
| CPU_SET_S(start, cpu_subset_size, cpu_subset); |
| } |
| |
| if (*next == ',') |
| next += 1; |
| else if (*next != '\0') |
| goto error; |
| } |
| |
| return; |
| |
| error: |
| fprintf(stderr, "\"--cpu %s\" malformed\n", optarg); |
| help(); |
| exit(-1); |
| } |
| |
| |
| void cmdline(int argc, char **argv) |
| { |
| int opt; |
| int option_index = 0; |
| static struct option long_options[] = { |
| {"add", required_argument, 0, 'a'}, |
| {"cpu", required_argument, 0, 'c'}, |
| {"Dump", no_argument, 0, 'D'}, |
| {"debug", no_argument, 0, 'd'}, /* internal, not documented */ |
| {"enable", required_argument, 0, 'e'}, |
| {"interval", required_argument, 0, 'i'}, |
| {"num_iterations", required_argument, 0, 'n'}, |
| {"help", no_argument, 0, 'h'}, |
| {"hide", required_argument, 0, 'H'}, // meh, -h taken by --help |
| {"Joules", no_argument, 0, 'J'}, |
| {"list", no_argument, 0, 'l'}, |
| {"out", required_argument, 0, 'o'}, |
| {"quiet", no_argument, 0, 'q'}, |
| {"show", required_argument, 0, 's'}, |
| {"Summary", no_argument, 0, 'S'}, |
| {"TCC", required_argument, 0, 'T'}, |
| {"version", no_argument, 0, 'v' }, |
| {0, 0, 0, 0 } |
| }; |
| |
| progname = argv[0]; |
| |
| while ((opt = getopt_long_only(argc, argv, "+C:c:Dde:hi:Jn:o:qST:v", |
| long_options, &option_index)) != -1) { |
| switch (opt) { |
| case 'a': |
| parse_add_command(optarg); |
| break; |
| case 'c': |
| parse_cpu_command(optarg); |
| break; |
| case 'D': |
| dump_only++; |
| break; |
| case 'e': |
| /* --enable specified counter */ |
| bic_enabled = bic_enabled | bic_lookup(optarg, SHOW_LIST); |
| break; |
| case 'd': |
| debug++; |
| ENABLE_BIC(BIC_DISABLED_BY_DEFAULT); |
| break; |
| case 'H': |
| /* |
| * --hide: do not show those specified |
| * multiple invocations simply clear more bits in enabled mask |
| */ |
| bic_enabled &= ~bic_lookup(optarg, HIDE_LIST); |
| break; |
| case 'h': |
| default: |
| help(); |
| exit(1); |
| case 'i': |
| { |
| double interval = strtod(optarg, NULL); |
| |
| if (interval < 0.001) { |
| fprintf(outf, "interval %f seconds is too small\n", |
| interval); |
| exit(2); |
| } |
| |
| interval_tv.tv_sec = interval_ts.tv_sec = interval; |
| interval_tv.tv_usec = (interval - interval_tv.tv_sec) * 1000000; |
| interval_ts.tv_nsec = (interval - interval_ts.tv_sec) * 1000000000; |
| } |
| break; |
| case 'J': |
| rapl_joules++; |
| break; |
| case 'l': |
| ENABLE_BIC(BIC_DISABLED_BY_DEFAULT); |
| list_header_only++; |
| quiet++; |
| break; |
| case 'o': |
| outf = fopen_or_die(optarg, "w"); |
| break; |
| case 'q': |
| quiet = 1; |
| break; |
| case 'n': |
| num_iterations = strtod(optarg, NULL); |
| |
| if (num_iterations <= 0) { |
| fprintf(outf, "iterations %d should be positive number\n", |
| num_iterations); |
| exit(2); |
| } |
| break; |
| case 's': |
| /* |
| * --show: show only those specified |
| * The 1st invocation will clear and replace the enabled mask |
| * subsequent invocations can add to it. |
| */ |
| if (shown == 0) |
| bic_enabled = bic_lookup(optarg, SHOW_LIST); |
| else |
| bic_enabled |= bic_lookup(optarg, SHOW_LIST); |
| shown = 1; |
| break; |
| case 'S': |
| summary_only++; |
| break; |
| case 'T': |
| tcc_activation_temp_override = atoi(optarg); |
| break; |
| case 'v': |
| print_version(); |
| exit(0); |
| break; |
| } |
| } |
| } |
| |
| int main(int argc, char **argv) |
| { |
| outf = stderr; |
| cmdline(argc, argv); |
| |
| if (!quiet) |
| print_version(); |
| |
| probe_sysfs(); |
| |
| turbostat_init(); |
| |
| /* dump counters and exit */ |
| if (dump_only) |
| return get_and_dump_counters(); |
| |
| /* list header and exit */ |
| if (list_header_only) { |
| print_header(","); |
| flush_output_stdout(); |
| return 0; |
| } |
| |
| /* |
| * if any params left, it must be a command to fork |
| */ |
| if (argc - optind) |
| return fork_it(argv + optind); |
| else |
| turbostat_loop(); |
| |
| return 0; |
| } |